迈瑞BS200规格表

合集下载

BSJKLV、BV、BLV导线参数

16.5 22.1 29.5 54.3 77.3 119.9 156.1 205.4 278.8 383.2 466.7 570.7 714.3 898.0 1114.1 1458.6
BV BV BV BV BV BV BV BV BV BV BV BV BV BV BV BV
450/750V 450/750V 450/750V 450/750V 450/750V 450/750V 450/750V 450/750V 450/750V 450/750V 450/750V 450/750V 450/750V 450/750V 450/750V 450/750V
0.8 0.8 0.8 1.0 1.0 1.2 1.2 1.4 1.4 1.6 1.6 1.8 2.0 2.2 2.4 2.6
3.9 4.4 4.9 7.0 8.0 10.0 11.5 13.0 15.0 17.5 19.0 21.0 23.5 26.6 29.6 33.2
7.41 4.61 3.08 1.83 1.15 0.727 0.524 0.387 0.268 0.193 0.153 0.124 0.0991 0.0754 0.0601 0.0470
4.8×7.4 5.3×8.5 6.2×10.1 6.7×11.1 6.9×11.5 7.5×12.5 7.8×13.0 9.5×16.2 4.6×9.6 4.8×10.1 5.3×11.7 6.2×14.0 7.0×15.8 7.1×16.3 7.5×17.5 7.8×18.2 9.5×.61 4.61 3.08 3.08 1.83 24.5 18.1 12.1 7.41 4.61 4.61 3.08 3.08 1.83
表3.1.2.3-2
芯数及标称截面 (mm2) 2×6 2×10 2×16 2×25 2×35 2×50 2×70 2×95 2×120 4×6 4×10 4×16 4×25 4×35 4×50 4×70 3×6+1×4 3×10+1×6 3×16+1×10 3×25+1×16 3×35+1×25 3×50+1×35 3×70+1×50 3×95+1×70 3×120+1×95 导体直径 (mm) 2.76 3.8 4.8 6.0 7.0 8.4 10 11.6 13.0 2.76 3.8 4.8 6.0 7.0 8.4 10.0 2.76 3.8 4.8 6.0 7.0 8.4 10.0 11.0 13.0

Amprobe TT-200（BS-100） BUTT SET模型教程说明书

BUTT SETMODEL TT-200Instruction Manual|AMPROBE Copyright © 2001 AmprobeINTRODUCTION -1-The TT-200 is designed for the installers, repair technicians, and other authorized personnel for line testing and temporary communications.The test set employs the latest in integrated circuit design to provide DTMF (Touch T one) and dial pulse output. Different from other test sets,it contains a mega ohm (M Ω) meter for testing insulation resistance and telephone capacity.The repairman can independently find out line con-ditions (faults) without the help of the central office (CO) by measuring the insulation resistance and telephone capacity.The TT-200 is made of high impact materials providing excellent insulat-ing properties. The rugged case is designed for rough handling and shocks normally associated with field service.FEATURES1.Monitor (Data Safe) Function.2.T alk Function.3.Tone/Pulse Dialing.st number redial in both tone and pulse modes.5.Hook and Flash Function.6.Terminating Function.7.Speaker Phone Function.8.Polarity Checking.9.Mute Function.10.Waterproof.11.Piercing pin and angled bed nails cord (ABN).12.Insulation Resistance Measurement.13.Earth-State.14.Line-Cut (Open).15.Line-Short.16.Telephone Capacity.1.Receiver2.Mega Ohm (M ) Meterpany logo4.TONE/PULSE:On/Off switch for pulse or tone.5.TEST/CALL: On/Off switch. Off position for M Ωinsulation meter and On for subscriber calling with the METER/CALL switch.6.HOOK:On/Off switch.7.Microphone8.SP:Speakerphone switch. 9.MON:On/Off switch for line monitoring without data loss.10.METER CALL:Button for Insulation Resistance measurement andsubscriber calling.11.Dial Keypad:The recessed 16-button keypad is housed in thereceiver end of the housing. The recessed design provides physical protection to the keyboard and prevents accidental button operation.12.Polarity LED 13.Polarity LED14.P:Polarity button.15.Speaker Phone Output16.Cordset:The cord set with one red and one black conductor. Eachconductor is fitted with an alligator clip, offset 20 degrees, with pierc-ing pin and angled bed nails cord (ABN). (P/N TT-200-1)17.Belt clip:A spring-loaded belt clip secures to a belt loop or D-ring.18.Cord Line Hanger19.Non-Slip Pad:The form and non-slip pad on back of the handgrip frees up both hands while the Butt set rest on the shoulder.20.Battery Cover:Compartment for one 9V battery.PHYSICAL DESCRIPTION (See Figure 1)-2--3-FRONTBACK-4-OPERATION INSTRUCTIONSPLACING A NORMAL CALLA calling signal is sent to the subscriber's telephone causing it to ring.1.Set to data safe mode by pressing the MON (9) switch.2.Connect the alligator clips to L1 and L2 of subscriber side.3.Listen for a clear line (no data).4.Release the data safe mode by pressing MON switch again. A dial tone should be heard.5.Select the type of dial signaling required, touch-tone or dial pulse, with the TONE/PULSE switch. Note that the phone will be in the last type selected.6.Enter the desired number on the keypad. For touch-tone signaling,tones associated with the respective key will be generated. Rotary dial signaling digits will automatically be pulsed out at the correct rate.T o terminate the call, press the HOOK button.SUBSCRIBER CALLINGA calling signal is sent to the subscriber's telephone causing it to ring.You can also talk with the subscriber.This function is useful when the 48V power is not supplied from the telephone office.1.Connect the alligator clips to L1 and L2 of subscriber side.2.Push the CALL (5) button and the LED will illuminate.3.Push the METER CALL (10) button to make subscriber's phone ring.T o conserve the battery life, press button several times monetarily.HOOK FUNCTIONThis switch establishes a 0N-HOOK or OFF-HOOK condition to the line.1.Connect the alligator clips to L1 and L2 of subscriber side.2.The HOOK LED is off indicating an OFF-HOOK condition and dial tone is present.3.Pressing the HOOK (6) button, the LED will illuminate and the unit is ON-HOOK. Incoming call will cause the bell to ring.TONE/PULSEThis position is used to select between the two dial modes. The PULSE position selects rotary style dial pulse signaling. The TONE position selects the DTMF signaling.1.Connect the alligator clips to L1 and L2 of subscriber side.2.Press the TONE/PULSE (4) to select the type of dial signaling required, touch-tone or dial pulse. Note that the phone will be in the last type selected.-5-OPERATION INSTRUCTIONS (CON’T)REDIAL (RD)Will redial the last number entered.1.Press the FS button for a new dial tone.2.Press the RD button to redial the last number entered. Up to 32 dig-its can be redialed.MUTE (MU)When pressed, the transmitter is muted and the side tone is eliminated.1.Press and hold the MU to mute, release to talk.FLASH (FS)The tester produces a line break (hook flash). It is typically used for reg-ister recall or redialing.1.Press the FS button for a new dial tone.SPEAKER PHONE FUNCTION (SP)This allows you to listen handsfree1.Connect the alligator clips to L1 and L2 of subscriber side.2.Pressing the SP (8) button activates the speakerphone.3.Pressing the SP (8) button again will turn off speakerphone function.MONITOR FUNCTION (MON)The monitor position provides a high impedance (over 100k Ω) coupling to the line without disrupting conversation, data or signaling.1.Press the MON (8) button and the LED will illuminate. The unit is in a high impedance condition.2.Connect the alligator clips to L1 and L2 of subscriber side.3.Pressing the MON button again, the LED turns off and the high imped-ance condition is removed.POLARITY INDICATORThe line polarity is checked and indicated on the red or green LED's.1.Connect the alligator clips to L1 and L2 of subscriber side.2.Press the P (14) and the two LED's indicate the polarity as follows.Green LED 'ON'The line with red alligator clip is TIP (+).The line with black alligator clip is RING (-).Red LED 'ON'The line with red alligator clip is RING (-).The line with black alligator clip is TIP (+).-6-ELECTRICALLoop Resistance less than 300Ω(talk mode)Monitor Impedance greater than 100k ΩROTARY DIAL OUTPUTPulsing Rate 100pps +/-0.8%Make Rate 33 +/-3%Minimum Pulse 600ms overDTMF OUTPUTFrequency Deviation +/-1.8%Level Deviation High -8dBm, Low -6dBm +/-0.8%Return Loss 2dBmRedial 32 digits Insulation Resistance 0.1- 10M Ω(DC 180V)Power SourceDC 9VINSULATION RESISTANCE & CAPACITY MEASUREMENT1.Connect the alligator clips to L1 and L2 of subscriber side.2.Push the METER CALL (10) button.3.The insulation resistance will be displayed on the 'Mega Ohm meter,when the METER CALL button is pressed.Generally, there are two conditions:Normal condition (good insulation between L1 and L2)The meter scale goes to 0.2Ωgenerally and then back. This is caused by the capacity of the connected subscriber's telephone or the line and terminal.Abnormal condition (bad insulation between L1 and L2)The meter scale goes up to a low value (below 1M Ω) and stays there.This indicates a faulty circuit on L1 and L2.Note -The meter will not move if the line is an open circuit.BATTERY CHECKIndicates if 9-volt battery requires replacement.1.Connect the two alligator leads together.2.Press the METER CALL (10) button. A good battery is indicated if the needle is in the BT section of the meter. If the needle is below, the bat-tery should be replaced.OPERATION INSTRUCTIONS (CON’T)Made in U.S.A. MAINTENANCE9101 NW 7th Ave.Miami, Florida 33150 U.S.A.Telephone: 305-423-7500 • Fax: 305-423-7554WARRANTYCongratulations! You are now the owner of an AMPROBE® instrument. It has been quality crafted according to the highest standards of quality and workmanship. This instrument has been inspected for proper operation of all its functions and tested by qualified factory technicians according to the long-established standards of AMPROBE®.Your AMPROBE® instrument has a limited Lifetime Warranty against defective materials and/or workmanship provided that the seal is unbroken or, in the opinion of the factory, the instrument has not been tampered with or taken apart. This warranty is limited to the original purchaser and is not transferable.Should your instrument fail due to defective materials, and/or workmanship, you may return it along with a copy of your dated bill of sale which must identify instrument by model number and manufac-turing number. Please contact the factory at the number on the back cover of this manual to obtain a Return Materials Authorization and return instructions.IMPORTANT: For your protection, please use the instrument as soon as possible. If damaged, or should the need arise to return your instrument, place it in a shipping carton packed with sufficient packing material. It must be securely wrapped. Amprobe is not responsible for damage in transit. Be sure to include a packing slip (indicating model and manufacturer number) along with a brief description of the problem. Make certain your name and address appears on the box as well as the packing slip.-Outside the U.S.A. the local Amprobe representative will assist you. Above limited warranty covers repair and replacement of instrument only and no other obligation is stated or implied.BATTERY REPLACEMENT1.Remove the two screws from the battery compartment2.Remove the cover and the clear rubber gasket3.Replace the battery with an alkaline or lithium 9V battery (polarity indi-cated on cover).4.Install the gasket, cover and screws.PHYSICAL Length 2.71" (69mm)Width 10.08" (256mm)Height 3.35" (85mm)Weight 20 ounces (560g)OPERATION INSTRUCTIONS (CON’T)。

医用耗材集中招标采购中标品种价格表

ml 双缩脲法 ml 双缩脲法 ml 双缩ቤተ መጻሕፍቲ ባይዱ法
0.56 0.275 0.49
上海北康科技发展有限公司北京金斯尔医疗用品有限责任公司北京金斯尔医疗用品有限责任公司兰州西典医疗器械有限公司兰州创新生物技术开发有限公司兰州执诚生物技术有限责任公司兰州创新生物技术开发有限公司兰州创新生物技术开发有限公司
人份双缩脲法
ml 双缩脲法 ml 速率法 ml 比色法
60ml×4；60ml×12 500ml×1 4×1000ml；硫酸铜、氢氧化钠、酒石酸钾钠、碘化钾 2×2000ml；硫酸铜、氢氧化钠、酒石酸钾钠、碘化钾 R:8×70ml；柠檬酸盐缓冲液、溴甲酚绿、表面活性剂,含校准液
0.3 0.22 0.25
甘肃省医疗机构第二次医用耗材集中招标采购中标品种价格表
单位:元编号 620 产品名称总蛋白测定试剂盒企业序号 16 投标公司名称兰州天瑞医疗科技有限公司日立、贝克曼、奥林巴斯、东芝、迈瑞等品牌各全自动生化仪机型专专用通用或专用机型产品生产厂家德赛诊断系统（上海）有限公司进单位口原理方法中标规格描述中标价配送单位兰州天瑞医疗科技有限公司 R1：6×64ml、R2：6×16ml；氢氧化钠、酒石酸钾钠、碘化钾、硫酸 0.31 铜；含校准液 240ml、210ml、400ml、300ml、 200ml；材质：酒石酸钾钠5g/L、硫酸铜2g/L、碘化钾1g/L、 NaOH30g/L。标准液：白蛋白 50g/L；附带标准品。 70ml×2；主要成分：酒石酸钾钠、硫酸铜、碘化钾、氢氧化钠 8×70ml；材质：CuSO4,NaOH,KI, 酒石酸钾钠 2×100ml,CuSO4,NaOH,KI,酒石酸钾钠

无缝钢管尺寸对照表(美标ansi-日标jis-德标din-英标bs-韩标ks)

钢管标号sch80表示什么意思？SCH20-SCH40-SCH80-SCH160 （附对照表）表示英制管壁厚系列：Sch.20----全称：Schedule 20Sch.10s--带s的系列为不锈钢专用，碳钢不用。

举个例子：2" sch.10s 表示2”接管的壁厚为2.9mm,材质为不锈钢；2" sch.40 表示2”接管的壁厚为4.0mm。

顺便再说一下钢管壁厚的表示方法：钢管壁厚表示方法有管子表号、钢管壁厚尺寸和管子重量三种方法1）是以管子表号"Sch"表示壁厚。

管子表号是管子设计压力与设计温度下材料许用应力的比值乘以1000,并经圆整后的数值。

即: Sch＝P/[σ]t×1000ANSI B36.10壁厚等级：Sch10、Sch20、Sch30、Sch40、Sch60、Sch80、Sch100、Sch120、Sch140、Sch160十个等级;ANSI B36.19壁厚等级：Sch5s、Sch10s、Sch40s、Sch80s四个等级;2）以钢管壁厚尺寸表示中国、ISO、日本部分钢管标准采用3）是以管子重量表示管壁厚度,它将管子壁厚分为三种：a.标准重量管,以STD表示b加厚管，以XS表示c.特厚管，以XXS表示。

对于DN≤250mn的管子，Sch40相当于STD，DN<200mm的管子,Sch80相当于XS。

无缝钢管尺寸对照表(美标ANSI-日标JIS-德标DIN-英标BS-韩标KS)最新最全钢管英寸对照表中外金属材料牌号对照及标准ASME/ ANSI的标准尺寸（无缝钢管）Unit:mmB16.9 B16.28 B36.10标称管径(NPS) 外直径公称壁厚Sch5s SCH10S Sch20 Sch30 Sch40 STD Sch80 XS Sch160 XXS8 1/4 13.7 0.54 - 1.65 - 1.85 2.24 2.24 3.02 3.02 - - 10 3/8 17.1 0.675 - 1.65 - 1.85 2.31 2.31 3.20 3.20 - - 15 1/2 21.3 0.84 1.65 2.11 - 2.41 2.77 2.77 3.73 3.73 4.78 7.47 20 3/4 26.7 1.05 1.65 2.11 - 2.41 2.87 2.87 3.91 3.91 5.56 7.82 25 1 33.4 1.32 1.65 2.77 - 2.90 3.38 3.38 4.55 4.55 6.35 9.09 32 1.1/4 42.2 1.66 1.65 2.77 - 2.97 3.56 3.56 4.85 4.85 6.35 9.70 40 1.1/2 48.3 1.90 1.65 2.77 - 3.18 3.68 3.68 5.08 5.08 7.14 10.15 50 2 60.3 2.38 1.65 2.77 - 3.18 3.91 3.91 5.54 5.54 8.74 11.07 65 2.1/2 73.0 2.88 2.11 3.05 - 4.78 5.16 5.16 7.01 7.01 9.53 14.02 80 3 88.9 3.50 2.11 3.05 - 4.78 5.49 5.49 7.62 7.62 11.13 15.24 90 3.1/2 101.6 4.00 2.11 3.05 - 4.78 5.74 5.74 8.08 8.08 - - 100 4 114.3 4.50 2.11 3.05 - 4.78 6.02 6.02 8.56 8.56 13.49 17.12 125 5 141.3 5.56 2.77 3.40 - - 6.55 6.55 9.53 9.53 15.88 19.05 150 6 168.3 6.62 2.77 3.40 - - 7.11 7.11 10.97 10.97 18.26 21.96 200 8 219.1 8.62 2.77 3.76 6.35 7.04 8.18 8.18 12.70 12.70 23.01 22.23 250 10 273.0 10.75 3.40 4.19 6.35 7.80 9.27 9.27 15.09 12.70 28.58 25.40300 12 323.8 12.75 3.96 4.57 6.35 8.38 10.13 9.53 17.48 12.70 33.32 25.40 350 14 355.6 14 3.96 4.78 7.92 9.53 11.13 9.53 19.05 12.70 35.71 - 400 16 406.4 16 4.19 4.78 7.92 9.53 12.70 9.53 21.44 12.70 40.49 - 450 18 457 18 4.19 4.78 7.92 11.13 14.27 9.53 23.83 12.70 45.24 - 500 10 508 20 4.78 5.54 9.53 12.70 15.09 9.53 26.19 12.70 50.01 - 550 22 559 22 4.78 5.54 9.53 12.70 - 9.53 28.58 12.70 53.98 - 600 24 610 24 5.54 6.35 9.53 14.27 17.48 9.53 30.96 12.70 59.54 - 650 *26 660 26 - - - - - 9.53 - 12.70 - - 700 *28 711 28 - - - - - 9.53 - 12.70 - - 750 *30 762 30 - - - - - 9.53 - 12.70 - - 800 *32 813 32 - - - - - 9.53 - 12.70 - -。

螺栓球规格表全接触

螺栓球规格表有哪些内容?螺栓球主要应用于无油管井下采油装置、套管爆炸扩径器、油管通径规等领域，不少业内人士都很需要螺栓球规格表来参考。

下面，为大家汇总螺栓球规格表，以供参考学习。

螺栓球规格表介绍了螺栓球代号，直径等信息，对于业内人士有很大的参考意义。

螺栓球规格表.螺栓球制作.螺栓球采用45#优质钢，所有原材料进厂后均进行3/1000抽样理化力学性能测试。

然后到专业锻压单位用250公斤或750公斤空气锤模锻而成球坯。

毛坯经正火处理，使其硬度达到HB197～225。

毛坯要求无裂纹、过烧、麻点等缺陷，椭圆度不超过1%倍直径。

螺栓球的精加工在X5032A型立式升降台铣床、ZA5032园柱立式钻床及ZA3050?16型摇臂钻床上用万能分度头进行加工。

①在立式铣床上铣出球的一个基准平面，并在钻床上加工好基准螺孔;然后利用此基准螺孔在X5032A型立式铣床上转动分度头加工出各弦杆孔和腹杆孔的平面。

夹具的转动定位偏差为?5?，加工完毕，进行角度检测，符合JGJ7—91的规定要求为正品。

②采用定位夹具在立式钻床上完成孔的加工。

③最后在钻床上进行螺纹的加工，保证各螺纹孔中心轴线夹角误差不大于?30?。

c.螺栓球的检测主要采用角度盘、角度板和角度棒进行检测角度。

①相邻两螺孔中心轴线夹角误差控制在±30?之内，且螺纹长度必须保证>1.3倍螺栓公称直径。

②同一轴线上两螺孔端面平等度允许偏差：当D?120mm时，偏差为?0.20mm;当D?120mm时，偏差为?0.30mm。

③螺孔端面距球心的允许偏差为?0.2mm。

④螺栓孔端面与轴线的垂直度为0.5%螺孔端面直径。

⑤螺孔螺纹加工精度，满足GB196中的6H级。

参考资料深圳市创固五金有限公司。

网站：/。

工字轮规格Microsoft Excel 工作表

クリンプ線ヤング率
拉伸率
ＣＳｉ碳化硅（切削粉）１０００目１５００目２０００目１英寸＝２５．４ｍｍ１２５＊１２５＊１６５２５．４＊６．５英寸＝１６５．１（对角线）ブロック分け→（多晶硅豆腐块）切成２５个小棒多晶硅杂质多，易断线，须用波纹线，くせがある。
线径 0.11 0.12 0.12 0.12，0.25直线，波形线 0.12（0.11） 0.12 0.12 0.12 0.12 0.12
片子大小（ウエハー晶片wafer） 6寸，6.5寸 6寸，6.5寸 8寸 8寸 6寸，6.5寸 8寸 6.5寸 6寸 8寸 8寸
பைடு நூலகம்
工字轮代号 settle-100 settle-40 settle-20 长度与重量的换算 0.10mm 0.11mm 0.12mm 0.13mm 0.14mm 0.25mm 専門用語インゴットウエハｗａｆｅｒセルパネルモジュールたんけっしょうたけっしょうスプールリール面取り機械ソーマシンスライス機械跳ね上がりはねあがり繰り返し使用リールセミコン semicon ダイス dies 耐用回数繰り出ししんせん巻取りソーマークぜいかカッビ断線ショットハネキンクビードワイヤパスラインクセ付けコーンしごき扱くストランドスペクトルささくれジルコンサンド D=Lm*3.14*r 2 7.8 0.06165g/m 0.07460g/m 0.08878g/m 0.1042g/m 0.1208g/m 0.3851g/m BS-200 BS-126 BS-64
别称
别称 TA-100 TA-64 TA-32
每米重量
中国語晶棒晶片电子片组件单晶多晶卷线筒（已卷线) 工字轮（未卷线）开方机开方机翘起可反复使用工字轮半导体拉丝模放线进线收线线痕脆化杯型(杂质)断线切几刀扭转胎唇线过线捋线绞合光谱波谱频谱毛刺毛口凸珠锆石砂

链条型号规格表

链条型号规格表链条是机械传动系统中重要的组成部分，具有连接和传递动力的作用。

根据不同的使用需求，链条型号和规格也会有所不同。

下面是链条型号规格表，供您参考：一、双排链1、BS双排链：链条型号为04C-2，05B-2，06B-2，08B-2，10B-2，12B-2，16B-2，20B-2，24B-2等。

2、ANSI双排链：链条型号为40-2，50-2，60-2，80-2，100-2，120-2，140-2，160-2，180-2，200-2，240-2等。

二、单排链1、BS单排链：链条型号为03C，04C，06C，085，08A，10A，12A，16A，20A，24A等。

2、ANSI单排链：链条型号为25，35，41，40，50，60，80，100，120等。

三、轻型链1、BS轻型链：链条型号为219H，220H，415H，428H，520H，525H，530H，630H等。

2、ANSI轻型链：链条型号为35H，40H，50H，60H，80H，100H等。

四、耐磨链1、BS耐磨链：链条型号为MTO4，MTO6，MTO8，MTO10，MTO12，MTO16，MTO20等。

2、ANSI耐磨链：链条型号为40MN，50MN，60MN，80MN，100MN，120MN等。

五、不锈钢链1、BS不锈钢链：链条型号为SS08B-1，SS10B-1，SS12B-1，SS16B-1，SS20B-1，SS24B-1等。

2、ANSI不锈钢链：链条型号为40SS，50SS，60SS，80SS，100SS，120SS等。

六、防腐链1、BS防腐链：链条型号为C2052H，C2062H，C2082H，C2102H，C2120H，C2160H，C2200H等。

2、ANSI防腐链：链条型号为60HF，80HF，100HF，120HF，140HF，160HF等。

以上是常用的链条型号规格表，供您参考。

为了保证链条的使用寿命和安全性，除了选择适当的型号规格，还需要注意规范的安装和维护操作。

检验试剂与耗材清单

盒
1
产地
商品
规格
单位
数量
单价
金额
康捷
载玻片
盒
1000p
康捷
一次性吸管(滴管)
1ML
支
2
迈瑞
打印纸BC-2800
50*20
卷
2
康健
一次性塑料尿杯
1T
个
1000
康捷
一次性便盒
大号
个
500
扬州邗江
男性拭子
支
200
扬州邗江
女性拭子
支
500
东台科华
血球沉降架(配管)
个
1
康捷
血球样品杯
迈瑞BC-2800
个
2
康健
抗心磷IGG
48T
盒
1
博峰
抗子宫IGG
48T
盒
1
博峰
弓形虫IGG
48T
盒
1
博峰
风疹病毒IGG
48T
盒
1
博峰
巨细胞IGG
48T
盒
1
博峰
单纯疱疹二型IGG
48T
盒
1
锦瑞
电解质AB标准液
500ML
套
2
锦瑞
电解质质控液
盒
1
锦瑞
清洗液
80ML
瓶
1
锦瑞
电解质活化液
盒
1
锦瑞
电极内充液
10ML
瓶
1
锦瑞
电解质参比内充液
10ML
瓶
1
迈瑞
溶血素BC-3000
500ML
瓶
1
迈瑞

1例藏獒三氮脒中毒的生化检验及治疗

1例藏獒三氮脒中毒的生化检验及治疗梁盼红【摘要】With three nitrogen amidine to the dose of 3.5 mg/kg for the Tibetan mastiffs suffering eperythrozoonosis by intramuscular injection. The next day with the same dose of three amidine nitrogen by intramuscular injection. 24 hours after the Tibetan mastiffs occurred in the clinical neurological symptoms of poisoning cases,and they are showing appetite waste,hind legs were soft,limbs are twitching like thrashing,lying down,they are in a coma and their temperature returned to be normal. By serum biochemical tests,urea nitrogen,creatine kinase and other biochemical parameters are significantly increased,blood glucose lowering accounted for 100%of cases. After five days of drug therapy,poisoning Tibetan mastiffs returned to be healthy.%用三氮脒以3.5 mg/kg的剂量对患有附红细胞体病的藏獒进行肌肉注射，隔日用同等剂量的三氮脒肌肉注射，24 h 后，藏獒发生以神经症状为主的中毒现象，并表现出食欲废绝，后肢发软，四肢抽搐呈划水状，卧地不起，昏迷，体温正常临床症状。

检验科试剂质量验收记录

一次性尿杯
大号
厦门康卫医疗器械有限公司
1.5ml离心管
1.5ml
厦门康卫医疗抗A,抗B血型定型
器械有限公司
试剂
10ml*2
厦门康卫医疗器械有限公司
糖化血红蛋白（HbAlc）检测试剂盒
100T/盒
厦门康卫医疗器械有限公司
尿微量白蛋白（mALB）检测试剂盒
100T/盒
厦门康卫医疗器械有限公司
2017/5/14 3
合格
合格
方枝贮藏2雄 30℃
厦门康卫医疗乙肝五项检测卡器械有限公司（胶体金法）
25T/盒
英科新创（厦门）国食药监械（准）科技有限公司字2013第3400840号
T
2016061635
2018/6/5 200
合格
合格
方枝贮藏2雄 30℃
厦门康卫医疗幽门螺旋杆菌抗体器械有限公司检测试剂盒
超敏C反应蛋白（hs-CRP）检测试剂盒
100T/盒
厦门康卫医疗一次性使用无菌采
器械有限公司
血针
23G I型
盐城信泰
包
深圳迈瑞生物医疗粤食药监械（准）电子股份有限公司字2014第2401063号
支
050316004
江苏康健
只
16041
江苏康健
支
160404
上海血液
国药准字S10980059 支 20151225
盒
141016011
2017/10/30 1
合格
合格
方枝贮存2雄 8℃
厦门康卫医疗器械有限公司
BS200尿酸（UA)
176ml(4* 35+2*18)

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

专用生化试剂 BS120/180/200 专用生化试剂 BS120/180/200 专用生化试剂105-001707-00 105-000469-00
类风湿因子(RF)★ 类风湿因子(RF)(含校准品)★ C-反应蛋白(CRP)★
规格 176ml(4*35+2*18) 176ml(4*35+2*18) 176ml(4*35+2*18) 176ml(4*35+2*18) 176ml(4*35+2*18) 176ml(4*35+2*18) 160ml(4*40) 160ml(4*40) 80ml(2*30+1*20) 96ml(2*40 +1*16) 55ml(1*40+1*15) 210ml(3*35+3*35) 80ml(2*30+1*20) 200ml(4*40+2*20) 176ml(4*35+2*18) 2*20 +S:1*1.5 160ml(4*40) 160ml(4*40) 54ml(1*40+1*14) 54ml(1*40+1*14) 47ml(1*35+1*12) 47ml(1*35+1*12) 72ml(2*32+1*8) R1a : 6×10mL+R1b:6瓶+R1c:6瓶+R2: 1×11mL+S: 1×1mL 176ml(4*35+2*18) 176ml(4*35+2*18) 100ml(2*40+1*20) 100ml(2*40+1*20) R1:2×30mL+R2:1×12 mL+样本处理液: 1×150mL R1:2×30mL+R2:1×12 mL +样本处理液: 1×150mL+S：2×1 mL R1 2×30mL + R2 1×15mL + S 1×1.5mL 200ml(4*40+2*20) 212ml(4*36+2*34) 48ml(1*38+1*10) 44ml(1*35+1*9) 160ml(4*40) 160ml(4*40) 160ml(4*40) 96ml(2*40+1*16 +S 1*1.5) 60ml(1*40+1*20) 60ml(1*40+1*20) 50ml(1*40+1*10) 60ml(1*40+1*20) 55ml(1*40+1*15) R1: 1×40mL+R2: 1×40mL R1: 1×40mL+R2: 1×40mL+S: 1×0.5 mL
R1: 1×40mL+R2: 1×15mL R1: 1×40mL+R2: 1×15mL+S: 5×0.5 mL 50ml(1*40+1*10)
类别专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂专用生化试剂
物料编码 105-000442-00 105-000443-00 105-000444-00 105-000445-00 105-000454-00 105-000455-00 105-000451-00 105-000450-00 105-000456-00 105-001565-00 105-000473-00 105-000952-00 105-000457-00 105-000476-00 105-000452-00 105-001558-00 105-000448-00 105-000449-00 105-000463-00 105-000464-00 105-000465-00 105-000466-00 105-000474-00 105-001530-00 105-000446-00 105-000447-00 105-000458-00 105-000459-00 105-001523-00 105-001698-00 105-001572-00 105-000949-00 105-000460-00 105-000475-00 105-001537-00 105-000453-00 105-000461-00 105-000462-00 105-001579-00 105-000470-00 105-000472-00 105-000471-00 105-000467-00 105-000468-00 105-001551-00 105-001713-00
产品名称丙氨酸氨基转移酶(ALT) 天门冬氨酸氨基转移酶(AST) 碱性磷酸酶(ALP) γ -谷氨酰转移酶(γ -GT) 总胆红素(T-bil)-V 直接胆红素(D-bil)-V 总蛋白(TP) 白蛋白(ALB) 总胆汁酸(TBA) 胆碱酯酶(CHE)★ 前白蛋白(PA) 肌酐（CREA）－J 肌酐(CREA)-S 尿酸(UA) 尿素(UREA) 二氧化碳(CO2)★ 总胆固醇(TC) 甘油三酯(TG) 高密度脂蛋白胆固醇(HDL-C) 低密度脂蛋白胆固醇(LDL-C) 载脂蛋白A1(ApoA1) 载脂蛋白B(ApoB) 脂蛋白(a)(LP(a)) 同型半胱氨酸(HCY) 乳酸脱氢酶(LDH) α -羟丁酸脱氢酶(α -HBDH) 肌酸激酶(CK) 肌酸激酶MB型同工酶(CK-MB) 糖化血红蛋白(HbA1c)★ 糖化血红蛋白(HbA1c)(含校准品)★ 果糖胺(FUN)★ 葡萄糖（Glu）-O 葡萄糖(Glu)-HK α -淀粉酶(α -AMY) 脂肪酶(LIP)★ 钙(Ca) 无机磷(P) 镁(Mg) 铁(Fe)★ 免疫球蛋白A(IgA) 免疫球蛋白G(IgG) 免疫球蛋白M(IgM) 补体因子C3 补体因子C4 抗链球菌溶血素“O”(ASO)★ 抗链球菌溶血素“O”(ASO)(含校准品)★
适用机型 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200 BS120/180/200