EZ022报告SGS(编号：0672)
LCP_E130I SGS报告
測試報告號碼(No.) : CE/2013/32247 日期(Date) : 2013/03/12 頁數(Page) : 1 of 9 *CE/2013/32247*Test Report福興實業股份有限公司 FU HSING INDUSTRIAL CO., LTD. 台北市延平南路74號 74, YEN PING SOUTH RD., TAIPEI TAIWAN以下測試樣品係由客戶送樣, 且由客戶聲稱並經客戶確認如下 (The following samples was/were submitted and identified by/on behalf of the client as)： 樣品名稱(Sample Description) 樣品型號(Style/Item No.) : : VECTRA LCP E130i-VF2201、E471i-VF2201、E473i-VF2201、E481i-VF2201、E463i-VF2201、 A130-VF2201、S135-VF2201、S471-VF2201、S475-VF2201、S476-VF2201、E480iVF2201、C130-VF2001 (本色) (NATURAL) 2013/03/05 2013/03/05 TO 2013/03/12收件日期(Sample Receiving Date) 測試期間(Testing Period): :===============================================================================================================測試結果(Test Results):請見下一頁 (Please refer to next pages).Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.Chemical-Taipei 33 WuC hyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /33t + 886 (02)2299 3279 f + 886 (02)2299 3237 Member of the SGS Group (SGS SA)測試報告號碼(No.) : CE/2013/32247 日期(Date) : 2013/03/12 頁數(Page) : 2 of 9 *CE/2013/32247*Test Report福興實業股份有限公司 FU HSING INDUSTRIAL CO., LTD. 台北市延平南路74號 74, YEN PING SOUTH RD., TAIPEI TAIWAN測試結果(Test Results) 測試部位(PART NAME) NO.1 測試項目 (Test Items) 鎘 / Cadmium (Cd) : 本色塑膠粒 (NATURAL PLASTIC PELLETS) 單位 (Unit) mg/kg 測試方法 (Method) 參考IEC 62321: 2008方法, 以感應藕 合電漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. 參考IEC 62321: 2008方法, 以感應藕 合電漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. 參考IEC 62321: 2008方法, 以感應藕 合電漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. 參考IEC 62321: 2008方法, 以UV-VIS 檢測. / With reference to IEC 62321: 2008 and performed by UVVIS. 參考US EPA 3540C: 1996方法, 以液 相層析質譜儀檢測全氟辛烷磺酸含量. / With reference to US EPA 3540C: 1996 method for PFOS Content. Analysis was performed by LC/MS. 參考US EPA 3540C: 1996方法, 以液 相層析質譜儀檢測全氟辛酸(銨)含量. / With reference to US EPA 3540C: 1996 method for PFOA Content. Analysis was performed by LC/MS. 方法偵測 極限值 (MDL) 2 結果 (Result) NO.1 n.d.鉛 / Lead (Pb)mg/kg2n.d.汞 / Mercury (Hg)mg/kg2n.d.六價鉻 / Hexavalent Chromium Cr(VI) by alkaline extractionmg/kg2n.d.全氟辛烷磺酸 / Perfluorooctane sulfonates (PFOS) PFOS – Acid PFOS – Metal Salt PFOS – Amide 全氟辛酸(銨) / PFOA (CAS No.: 00033567-1)mg/kg10n.d.mg/kg10n.d.Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.Chemical-Taipei 33 WuC hyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /33t + 886 (02)2299 3279 f + 886 (02)2299 3237 測試報告號碼(No.) : CE/2013/32247 日期(Date) : 2013/03/12 頁數(Page) : 3 of 9Test Report福興實業股份有限公司 FU HSING INDUSTRIAL CO., LTD. 台北市延平南路74號 74, YEN PING SOUTH RD., TAIPEI TAIWAN 測試項目 (Test Items) 鹵素 (氯) / Halogen-Chlorine (Cl) (CAS No.: 022537-15-1) 鹵素 (溴) / Halogen-Bromine (Br) (CAS No.: 010097-32-2) 多溴聯苯總和 / Sum of PBBs 一溴聯苯 / Monobromobiphenyl 二溴聯苯 / Dibromobiphenyl 三溴聯苯 / Tribromobiphenyl 四溴聯苯 / Tetrabromobiphenyl 五溴聯苯 / Pentabromobiphenyl 六溴聯苯 / Hexabromobiphenyl 七溴聯苯 / Heptabromobiphenyl 八溴聯苯 / Octabromobiphenyl 九溴聯苯 / Nonabromobiphenyl 十溴聯苯 / Decabromobiphenyl 多溴聯苯醚總和 / Sum of PBDEs 一溴聯苯醚 / Monobromodiphenyl ether 二溴聯苯醚 / Dibromodiphenyl ether 三溴聯苯醚 / Tribromodiphenyl ether 四溴聯苯醚 / Tetrabromodiphenyl ether 五溴聯苯醚 / Pentabromodiphenyl ether 六溴聯苯醚 / Hexabromodiphenyl ether 七溴聯苯醚 / Heptabromodiphenyl ether 八溴聯苯醚 / Octabromodiphenyl ether 九溴聯苯醚 / Nonabromodiphenyl ether 十溴聯苯醚 / Decabromodiphenyl ether 備註(Note)： 1. mg/kg = ppm；0.1wt% = 1000ppm 2. n.d. = Not Detected (未檢出) 3. MDL = Method Detection Limit (方法偵測極限值) 4. "-" = Not Regulated (無規格值) 單位 (Unit) 測試方法 (Method) 參考BS EN 14582:2007, 以離子層析 儀分析. / With reference to BS EN 14582:2007. Analysis was performed by IC. 方法偵測 極限值 (MDL) 50 50 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 *CE/2013/32247*結果 (Result) NO.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.mg/kgmg/kg參考IEC 62321: 2008方法, 以氣相層 析儀/質譜儀檢測. / With reference to IEC 62321: 2008 and performed by GC/MS.Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.Chemical-Taipei 33 WuC hyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /33t + 886 (02)2299 3279 f + 886 (02)2299 3237 測試報告 Test Report福興實業股份有限公司號碼(No.) : CE/2013/32247 日期(Date) : 2013/03/12 頁數(Page) : 4 of 9 *CE/2013/32247*FU HSING INDUSTRIAL CO., LTD. 台北市延平南路74號 74, YEN PING SOUTH RD., TAIPEI TAIWANPFOS參考資訊(Reference Information) : 指令 2006/122/EC (Directive 2006/122/EC) (1) 該物質不可置於市場上或使用於特殊物質或配置成分重量濃度等於或大於0.005%. (May not be placed on the market or used as a substance or constituent of preparations in a concentration equal to or higher than 0.005 % by mass.) (2) 該物質不可置於市場上的半成品或商品或其物件; 假若零件上明顯地具有PFOS並參照結構上及微細構造上計算 PFOS重量濃度等於或大於0.1%, 而紡織品或其他覆蓋物質, 如果PFOS在覆蓋物質中含量等於或大於1µg/m². (May not be placed on the market in semi-finished products or articles, or parts thereof, if the concentration of PFOS is equal to or higher than 0.1 % by mass calculated with reference to the mass of structurally or microstructurally distinct parts that contain PFOS or, for textiles or other coated materials, if the amount of PFOS is equal to or higher than 1µg/m² of the coated material.)Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.Chemical-Taipei 33 WuC hyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /33t + 886 (02)2299 3279 f + 886 (02)2299 3237 測試報告號碼(No.) : CE/2013/32247 日期(Date) : 2013/03/12 頁數(Page) : 5 of 9 *CE/2013/32247*Test Report福興實業股份有限公司 FU HSING INDUSTRIAL CO., LTD. 台北市延平南路74號 74, YEN PING SOUTH RD., TAIPEI TAIWAN1) 根據以下的流程圖之條件，樣品已完全溶解。
均质材料拆分表-SGS+MSDS 2014
Analyze report number 化驗報告號碼
SHAEC132352071 7 SHAEC132352071 8 JP2013/110796-1
Remark 備註
Attach MSDS or Mill sheet for all the parts and materials MSDS或成分表檔案
<50
SGS
6-Dec-13
<50
SGS
5-Dec-13 JP2013/110796-2
E:\MSDS 2013.pdf
<50
SGS
6-Dec-13
SHAEC132352070 1 SHAEC132352070 2 SHAEC132352072 1 SHAEC132352072 0 SHAEC132352072 4 SHAEC132352072 3
Material & Substance Check List Manufacture company： Kyocera Supplier： Wuxi CTS Supply Chain Management Component Specification： MLCC Case Size(EIA)：
’0201/0402/0603
NICKEL PLATING 1
1.8
TIN PLATING 1
2.2
Contact window phone E-mail Data
Eoh Teng Kor 008615995639278 tk-eoh.sz@ 2014-11-5
Homogeneous material Vender 均質材料供應商
N/A N/A Yes 刻意 No 01-Naphthalene 添加 非刻 2-Acenaphthylene 意添 3-Acenaphthene 4-Fluorene
b338钛及钛合金标准规范中文版
B338钛及钛合金的带、片、板标准规范本标准是在指定的B265规范下发布的；在这个指定的规范后面的数字表明了最初使用的年份，或如果做了修订，最新修订的年份。
括号中的数字表示重获批准的年份。
标在上角的希腊字母表示自最新修订或重获批准后编辑上的改变。
本标准已获国防部批准。
1.规范范围1.1本标准包含了下列退火的钛及钛合金带、片、板：1.1.1等级1—纯钛；1.1.2等级2—纯钛；1.1.2.1等级2H—纯钛（等级2中最小抗拉强度是58ksi的纯钛）；1.1.3等级3—纯钛；1.1.4等级4—纯钛；1.1.5等级5—钛合金（含6%的A1,4%的V）；1.1.6等级6—钛合金（含5%A1,2.5%Sn）1.1.7等级7—钯含量在0.12~0.25%的纯钛；1.1.7.1等级7H—钯含量在0.12〜0.25%的纯钛（等级7中最小抗拉强度是58ksi的纯钛）；1.1.8等级9—钛合金（含3.0%Al,2.5%V）；1.1.9等级11—钯含量在0.12〜0.25%的纯钛；1.1.10等级10—钛合金（含0.3%Mo,0.8%Ni）；1.1.11等级13—钛合金（含0.5%Ni,0.05%钉）1.1.12等级14—钛合金（含0.5%Ni,0.05%钉）；1.1.13等级15—钛合金（含0.5%Ni,0.05%钉）；1.1.14等级16—钯含量在0.04%〜0.08%的纯钛；1.1.14.1等级16H—钯含量在0.04%〜0.08%的纯钛（等级16中最小抗拉强度是58ksi的纯钛）；1.1.15等级17—钯含量在0.04%〜0.08%的纯钛；1.1.16等级18—钯含量在0.04%〜0.08%的钛合金（含3%A1,2.5%V）；1.1.17等级19—钛合金（含3%A1,8%V,6%Cr,4%Zn,4%Mo）；1.1.18等级20—钯含量在0.04%〜0.08%的钛合金（含3%Al,8%V,6%Cr,4%Zn,4%Mo）；1.1.19等级21—钛合金（含15%Mo,3%Al,2.7%Ni,0.25%Si）；1.1.20等级23—钛合金（含6%A1,4%V以及其他低含量的间隙元素，ELI）；1.1.21等级24—钯含量在0.04〜0.08%的钛合金（含6%A1,4%V）；1.1.22等级25—Ni含量在0.3%〜0.8%以及钯含量在0.04%〜0.08%的钛合金（含6%Al，4%V）；1.1.23等级26—钌含量在0.08%〜0.14%的纯钛；1.1.23.1等级26H—钉含量在0.08%〜0.14%的纯钛（等级26中最小抗拉强度是58ksi的纯钛）1.1.24等级27—钌含量在0.08%〜0.14%的纯钛；1.1.25等级28—钉含量在0.08%〜0.14%的钛合金（含3%A1,2.5%V）；1.1.26等级29—钉含量在0.08%〜0.14%的钛合金（含6%Al,4%V以及其他低含量间隙元素，ELI）；1.1.27等级30—钛合金（含0.3%Co,0.05%钯）；1.1.28等级31—钛合金（含0.3%Co,0.05%钯）；1.1.29等级32—钛合金（含5%Al,1%Sn,1%Zr,1%V,0.8%Mo）；1.1.30等级33—钛合金（含0.4%Ni,0.015%钯,0.025%钉,0.15%Cr）；1.1.31等级34—钛合金（含0.4%Ni,0.015%Pa,0.025%钉,0.15%Cr）；1.1.32等级35—钛合金（含4.5%Al,2%Mo,1.6%V,0.5%Fe,0.3%Si）；1.1.33等级36—钛合金（含45%铌）；1.1.34等级37—钛合金（含1.5%Al）；1.1.35等级38—钛合金（4%Al,2.5%V,1.5%Fe）；注1：H级别的材料与相应数字级别的材料是等同的（如，Grade2H=Grade2）除非有更高级的最小抗拉强度保证，可以通过符合相应数字级别的要求来验证。
韩国POM 加纤SGS RoHS 报告
Page 1 of 4Issued Date:2013. 01. 07Test Report No. F690101/LF-CTSAYAA13-00045KOREA ENGINEERING PLASTICS (ULSAN)84,Gorae-ro Jangsaengpo Nam-ku Ulsan KoreaTo:The following merchandise was submitted and identified by the client as :SGS File No.:AYAA13-00045Product Name : KEPITAL 3Item No./Part No.:FG2025Client Reference Data : FB2025, FB2030, FG1025, FG2010, FG2015, FG2020, FG2025(K/LOF), FG2025D, FG2030, MF3010, MF3025, MF3025E, TG-61, FG2025T, FG20252013. 01. 022013. 01. 07to 2013. 01. 03Received Date :Test Period :Test Results :For further details, please refer to following page(s)Test Performed :SGS Korea tested the sample(s) selected by applicant with following results.By the applicant’s request, item No.s/part No.s & client reference information are stated/added on report.Report Comments:SGS Korea Co., Ltd.Page 2 of 4Issued Date:2013. 01. 07Test Report No. F690101/LF-CTSAYAA13-00045Sample No. :AYAA13-00045.001KEPITAL 3Sample Description :Item No./Part No.:FG2025POMMaterials :Heavy MetalsResultsMDL Test Method Unit Test Items0.5With reference to IEC 62321:2008, ICP Cadmium (Cd)N.D.mg/kg 5With reference to IEC 62321:2008, ICP Lead (Pb)N.D.mg/kg 2With reference to IEC 62321:2008, ICP Mercury (Hg)N.D.mg/kg 1With reference to IEC 62321:2008, UV-VISHexavalent Chromium (Cr VI)N.D.mg/kgFlame Retardants-PBBs/PBDEsResultsMDLTest MethodUnitTest Items5With reference to IEC 62321:2008, GC-MS Monobromobiphenyl N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Dibromobiphenyl N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Tribromobiphenyl N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Tetrabromobiphenyl N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Pentabromobiphenyl N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Hexabromobiphenyl N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Heptabromobiphenyl N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Octabromobiphenyl N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Nonabromobiphenyl N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Decabromobiphenyl N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Monobromodiphenyl ether N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Dibromodiphenyl ether N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Tribromodiphenyl ether N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Tetrabromodiphenyl ether N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Pentabromodiphenyl ether N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Hexabromodiphenyl ether N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Heptabromodiphenyl ether N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Octabromodiphenyl ether N.D.mg/kg 5With reference to IEC 62321:2008, GC-MS Nonabromodiphenyl ether N.D.mg/kg 5With reference to IEC 62321:2008, GC-MSDecabromodiphenyl etherN.D.mg/kgNOTE:(1) N.D. = Not detected.(<MDL)(2) mg/kg = ppm(3) MDL = Method Detection Limit (4) - = No regulation(5) Negative = Undetectable / Positive = Detectable (6) ** = Qualitative analysis (No Unit)(7) * = Boiling-water-extraction:Negative = Absence of CrVI coatingPositive = Presence of CrVI coating; the detected concentration in boiling-water-extraction solution is equal or greater than 0.02 mg/kg with 50 cm2 sample surface area.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, ifTest Report No. F690101/LF-CTSAYAA13-00045Page 3 of 4Issued Date:2013. 01. 07Picture of Sample as Received:NOTE:(1) N.D. = Not detected.(<MDL)(2) mg/kg = ppm(3) MDL = Method Detection Limit(4) - = No regulation(5) Negative = Undetectable / Positive = Detectable(6) ** = Qualitative analysis (No Unit)(7) * = Boiling-water-extraction:Negative = Absence of CrVI coatingPositive = Presence of CrVI coating; the detected concentration in boiling-water-extractionsolution is equal or greater than 0.02 mg/kg with 50 cm2 sample surface area.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, ifPage 4 of 4Issued Date:2013. 01. 07Test Report No. F690101/LF-CTSAYAA13-00045Testing Flow Chart for RoHS:Cd/Pb/Hg/Cr 6+/PBBs&PBDEs TestingSample MeasurementDATAGC/MSSolvent Extraction of the Sample Clean-up with FlorisilColumnConcentration/Dilution of Extraction SolutionFiltrationCd/Pb/HgPBBs/PBDEsMechanic_SampleSample MeasurementAcid Digestion with Microwave/HotplateFiltrationResidueTotal DigestionICP-AES/AAS/MSDATAMechanic_SampleA Red Color Indicates the Presence of CrVIConfirm with UV-VisCrSample MeasurementAdding Extraction SolutionMetallic MaterialUV-VisDATAMechanic_Sample 6+Filtration and pH AdjustmentAdding 1,5-Diphenylcarbazidefor Color DevelopmentHeating to 90~95°C for ExtractionNonmetallic MaterialAdding 1,5-Diphenylcarbazide for Color DevelopmentMechanic_SampleSample MeasurementSpot Test / Boiling Water Extraction DATACr6+The samples were dissolved totally by pre-conditioning method according to above flow chart for Cd,Pb,Hg. Section Chief : Gilsae Yi*** End ***NOTE:(1) N.D. = Not detected.(<MDL)(2) mg/kg = ppm(3) MDL = Method Detection Limit (4) - = No regulation(5) Negative = Undetectable / Positive = Detectable (6) ** = Qualitative analysis (No Unit)(7) * = Boiling-water-extraction:Negative = Absence of CrVI coatingPositive = Presence of CrVI coating; the detected concentration in boiling-water-extraction solution is equal or greater than 0.02 mg/kg with 50 cm2 sample surface area.This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if。
洋白铜sgs RoHS测试报告C7521
过滤
溶液
残留物
1) 碱 熔 法 / 灰 化 2) 酸溶解
电感耦合等离子体发射光 谱仪
数据
量取
六价铬
非金属
金属
加入消解液
在 90~95℃条件 下萃取
检测到 点测试 未检测到
沸水萃取
过滤，调整 pH
加入 1,5-二苯碳 酰二肼显色
加入 1,5-二苯碳 酰二肼显色
紫外-可见光 分光光度计
若显示红色，表 明检测到六价
0000378598
测试报告.
附件
No. SHAEC1105964906
日期: 2011年05月03日. 第3页,共4页.
RoHS 测试流程图
1) 分析人员： 施青/徐双/肖飞 2) 项目负责人：张春华/徐亮 3) 样品按照下述流程被完全消解（六价铬测试除外）
预处理
铅/镉/汞 用微波消解仪/电热板
施青徐双肖飞溶液过滤残留物酸溶解用微波消解仪电热板进行酸消解数据预处理金属沸水萃取加入15二苯碳酰二肼显色点测试未检测到检测到数据若显示红色表明检测到六价铬必要时采用紫外可见光分光光度计验证加入15二苯碳酰二肼显色紫外可见光分光光度计非金属加入消解液在9095条件下萃取过滤调整ph数据0000378598测试报告
SP11-012054 - SH . 2011年04月27日. 2011年04月27日 - 2011年05月03日. 根据客户要求测试.
测试方法 :. 测试结果 :. 结论 :进行的测试, 测试结果与欧盟RoHS指令2002/95/EC以及后续修正指 令的要求相符.
样品部件外观描述 :.
样品编号. 1.
SGS样品ID.
描述.
SHA11-059649.003 银色金属.
SGS测试项目一览表
重金属溶出量(铅,镉,铬,镍,铜,钴,锑)
1935/2004/EC欧盟食品级测试(纸质品类)
1935/2004/EC 欧盟食品级纸质品检测
PCD五氯苯酚
防腐效力
重金属释放量
荧光物质
注:3,4不适与干性食品接触的样品做测试
全面迁移全套测试(一般情况下四项浸取法都做)
Soluble Chromium 溶出铬含量
Total Vanadium 总钒含量
Total Zirconium 总锆含量
Sensory test-taste and odour to the integrate product
感官测试-味道和气味对于与食品接触的整体产品
其他
Ghost Wipe 擦拭测试
FDA 美国食品级金属测试
FDA 美国食品级陶瓷测试
FDA 美国食品级塑胶测试(PC聚碳酸酯177.1580)
FDA 美国食品级颜料测试(175.300涂层测试)
加州65(陶瓷测试)
84/500/EEC 欧盟陶瓷指令
加州65
FDA21CFR 177.1520(食品级聚丙烯)
ASTM963-2美国玩具测试 易燃性测试
ASTM963-3美国玩具测试 八大重金属+总铅测试
EN71欧盟玩具测试
EN71-1欧盟玩具测试 物理和机械性能测试
EN71-2欧盟玩具测试 易燃性测试
EN71-3欧盟玩具测试 八大重金属可溶性测试
2002/72/EC食品级塑胶测试
2002/72/EC 欧洲食品级塑胶检测
Overall migration in 3% acetic acid
SGS2010中文
铅/镉/汞 用微波消解仪/电热板 进行酸消解
多溴联苯/ 多溴联苯/多溴二苯醚 用溶剂萃取 非金属 浓缩/稀释萃取液
六价铬
金属
过滤
加入消解液
检测到
点测试 未检测到 沸水萃取
溶液
残留物
过滤
在 90~95 ℃ 条 件下萃取 过滤，调整 pH
1) 碱熔法/灰化 2) 酸溶解
气相色谱-质谱联用 仪
加入 1,5-二苯碳 酰二肼显色 加入 1,5-二苯碳 酰二肼显色 紫外-可见光分 光光度计 若显示红色，表 明检测到六价 铬，必要时采用 紫外-可见光分光 光度计验证 数据
测试报告
测试结果: 样本 1 描述：带浅蓝色镀层的部件 A：RoHS 指令 2002/95/EC 测试项目 镉 (Cd) 铅 (Pb) 汞 (Hg) 沸水萃取法测六价铬 (CrVI) 多溴联苯(PBBs)之和 单溴联苯 二溴联苯 三溴联苯 四溴联苯 五溴联苯 六溴联苯 七溴联苯 八溴联苯 九溴联苯 十溴联苯 多溴二苯醚(PBDEs)之和 单溴二苯醚 二溴二苯醚 三溴二苯醚 四溴二苯醚 五溴二苯醚 六溴二苯醚 七溴二苯醚 八溴二苯醚 九溴二苯醚 十溴二苯醚 单位
1000
注释: 1. mg/kg = ppm 2. N.D. = 未检出 (< MDL) 3. MDL = 方法检测限 4. ◇= 点测试: Negative = 未检测到六价铬, Positive = 检测到; (如果点测试结果为 Negative 或不能确认，测试样品需进一步由沸水萃取法进行测试。) 沸水萃取法: Negative = 未检测到六价铬 2 Positive = 检测到六价铬; 每 5 0c m 表 面 积 的 被 测 试样 品 的 沸 水 萃 取 液 中六 价铬 的 浓 度 等 于 或 大 于
SRS-022
孩之寶公司
品質保証安全性及可靠性規格
SRS - 022
題目: 化妝品的微生物品質測試規格
由: Linny Doane 批准:
日期: 1990年3月30日版本: A
1.0 目的
制定方法以測量化妝品里含有的微生物并規定此類污染可接受的最高極限。
2.0 範圍
此規格适合以或可能以擦、潑、灑、噴、或噴于、圖抹或以其它方式用于人身体(或玩具)的化妝品(即清潔、美化、增加吸引力或改變形象,而不會影響身體、結構或功能)。
3.0 程序
3.1 如該化妝品可以使用,跳至3.2項,如不是,遵照玩具說明書作准備。
如需用水稀釋，則使用
3倍于指定的水量。
3.2 在32℃的情況下在培養器中放置一夜.
3.3 遵照CTFA程序“化妝品和微生物極限准則”,確定微生物的等級和類型。
4.0 規格
每克含有低于100個微生物的產品為合格產品;不允許出現陰性細菌或帚性菌。
5.0 參考
5.1 CTFA (化妝品和香味協會)技術准則.。
钛白粉SGS
测试测试报告报告No. SH7161564/CHEM Date: Jan. 2, 2008 Page 1 of 3上海鸿运源化工有限公司 上海市青浦工业区重固发展区委托检验的样品及客户对样品的说明如下:样品名称 : 钛白粉 (金红石型) SGS 相关号 : 10753611-2型号 : HR-968-969-978 基体材质 : TiO 2样品收到日期 : 2007-12-27样品试验日期 : 2007-12-27—2008-01-02试验要求 : 参照RoHS 指令2002/95/EC 及后续修正指令.试验方法 : 参照IEC 62321 Ed.1 111/54/CDV ：电子电器产品中限用物质含量的测定程序 (1) 用ICP 测定镉的含量(2) 用ICP 和AAS 测定铅的含量 (3) 用ICP 测定汞的含量(4) 用点测试法测定六价铬的含量(5) 用GC-MS 测定PBBs(多溴联苯)和PBDEs(多溴联苯醚) 的含量试验结果 : 见后续页试验结论 : 基于所送样品进行的测试, 测试结果与欧盟RoHS 指令2002/95/EC 以及后续修正指令的要求相符。
SGS-CSTC 化学实验室授权签字SGS-CSTC 化学实验室授权签字张曜 郝金玉 部门经理实验室经理本报告是发布日期为2008年01月02日编号为SH7161563/CHEM 英文检测报告的中文译本。
如有异议，以英文版本为准。
测试测试报告报告No. SH7161564/CHEM Date: Jan. 2, 2008 Page 2 of 3化学方法的试验结果 (单位: mg/kg)测试项目:方法 (参见) 1 MDL RoHS 限值 镉(Cd) (1) ND 2 100 铅(Pb) (2) ND 2 1000 汞(Hg)(3) ND 2 1000 碱性溶液萃取测六价铬(Cr VI) (4)ND 2 1000 多溴联苯(PBBs)之和 ND - 1000 一溴联苯 ND 5 - 二溴联苯 ND 5 - 三溴联苯 ND 5 - 四溴联苯 ND 5 - 五溴联苯 ND 5 - 六溴联苯 ND 5 - 七溴联苯 ND 5 - 八溴联苯 ND 5 - 九溴联苯 ND 5 - 十溴联苯ND 5 - 多溴联苯醚(PBDEs)之和(参见备注4) ND - 1000 一溴联苯醚 ND 5 - 二溴联苯醚 ND 5 - 三溴联苯醚 ND 5 - 四溴联苯醚 ND 5 - 五溴联苯醚 ND 5 - 六溴联苯醚 ND 5 - 七溴联苯醚 ND 5 - 八溴联苯醚 ND 5 - 九溴联苯醚 ND 5 - 十溴联苯醚ND 5 - 多溴联苯醚(PBDEs)之和 (一溴到十溴)(5)ND--测试部件外观描述: 1. 白色粉末备注 :(1) 毫克每千克=百万分之一(mg/kg=ppm) (2) ND =未检出(3) MDL =检测极限值(4) 一溴联苯醚到九溴联苯醚之和,按照2005/717/EC 十溴联苯醚豁免。
关于REACH SVHC候选清单中硼化合物测试方法的说明
关于SVHC候选清单中硼化合物测试方法的说明
尊敬的客户：
欧盟第1907/2006（EC）号法规，即化学品的注册、评估、授权和限制（REACH）法规，要求在成品、配置品或物质中含有浓度大于0.1%的高关注物质（SVHC）的信息必须在供应链中传递。
截至2014年12月17号，硼酸、无水四硼酸钠、水合硼酸钠、三氧化二硼、四氟硼酸铅、过硼酸钠和水合过硼酸钠被列入SVHC候选清单。
因其被鉴定为致癌、致突变和生殖毒性物质。
由于现有检测手段仅能够检测硼元素和铅元素的含量，对其来源并不能被直接鉴定，目前没有标准化的国际方法可用于鉴定和定量检测以上这些SVHC在消费品中的含量。
SGS 依据ECHA的要求和专业研究，开发了检测这些SVHC物质的筛分方法，即通过检测硼元素和铅元素的含量，然后通过换算得出这些SVHC物质在样品中可能存在的最大浓度。
根据ECHA的推荐，此方法确认有效。
基于实验研究，有两种检测硼元素的方法可供选择：
□根据ICP-OES测试水提取的硼元素的结果换算「候选清单」中之硼化合物，
（非粉末/液体/膏体样品默认选择此方法）。
□根据ICP-OES测试的硼元素的结果换算「候选清单」中之硼化合物，
（粉末/液体/膏体类样品默认选择此方法）。
当检测结果为阳性时，建议客户通过检查化学配方和产品生产过程以进一步确认样品中是否存在上述化合物。
在欧盟成员国出售含有大于0.1%的SVHC的物品，关于REACH可能有进一步的义务需要遵循。