塑胶零件检验项目及抽样标准(中英文)

塑胶零件检验项目及抽样标准

1.目的:

Purpose：

订定进料检验项目及抽样标准，以做为进料检验之标准。

To set up incoming material inspection items and sampling

standard, to assure the incoming inspection.

2.范围:

Scope)：

所有一般进料之塑料类材料，包括所有塑料、橡胶及其组合件等。

All of the incoming plastic part, include plastic, rubber and others assembly parts.

3.权责:

Responsibility：

IQC须依进料抽样检验标准作进料检验，VQA可适质量状况呈检验单位主管同意后作检验项目及抽样数之更改。

IQC inspectors according to the incoming sampling planning to inspect, VQA engineers can accord the material quality to change the inspection items and sampling planning before department manager agreement.

4.相关文件：

Relevance documents:

4.1.抽样计划AG-0801-Q029-XX

Incoming inspection sampling plan

4.2.进料管制AG-0801-Q028-XX

Incoming control

5.作业规定要点:

Detail operating procedure：

5.1.抽样计划:各site VQA 可因应实际情况不同，调整相关抽样计划，

经 site VQA主管同意后实行．

Sampling Plan: Base on the different situation, site VQA

could revise this sampling plan and get the approval by site

VQA head before implement

5.1.1.正常检验：AQL 0.65%，LEVEL I。(For Automotive Part

Requirement: AQL 0.4% S-3,)

Regular inspection: AQL 0.65%,LEVEL I(For Automotive Part

Requirement: AQL 0.4% S-3)

5.1.2.尺寸检验：以每批抽5 pcs量测 ,以0/1判定。如客户或VQA有

需求才执行

Dimension inspection: 0/1 arbitration based on 5 pcs(Base

on request of Customer or VQA)

5.1.3.焊锡性检验：以3PCS检验，0/1判定。(须经后续焊锡作业者，

得执行之) (如客户或VQA有需求才执行)

Soldering inspection：0/1 arbitration based on 3 pcs。Perform

it, if these materials need post-soldering process. (Base

on request of Customer or VQA)

5.1.4.黏着度试验:每批3PCS, 0/1判。(For Automotive Part

Requirement) 如客户或VQA有需求才执行

Glue-adhesion test：3 pcs / per incoming lot. 0/1 adjudgement. (For Automotive Part Requirement) (Base on

request of Customer or VQA).

5.1.5.导线熔接性试验:每批试打线5条，0/1判(For Automotive Part

Requirement) 如客户或VQA有需求才执行.

Wire welding test：test 5 pcs / per incoming lot. 0/1

adjudgement. (For Automotive Part Requirement)(Base on

request of Customer or VQA)

5.1.

6.耐然性试验:每批检验3PCS，0/1判(For Automotive Part

Requirement) 如客户或VQA有需求才执行.

Flammable test：3 pcs / per incoming lot. 0/1 adjudgement.

(For Automotive Part Requirement) (Base on request of

Customer or VQA)

5.2.缺点项目

Major defect items：