烟台LED彩屏汇总
2020新版山东省烟台市网络科技有限公司工商企业公司商家名录名单黄页联系电话号码地址大全344家
山东恩源网络科技有限公 司
温泉路378号附近
烟台达内软件科技公司
海港路25号阳光100城市广场A座 0402
烟台北方星空自控科技有 限公司
马山街道经八路17号
烟台创基机器人俱乐部 秦淮河路16号创基梦工场2层
山东纵扬网络科技有限公 司
桐林路31号
鹏展网络科技有限公司 师范路409号附8号
烟台正米网络科技有限公 开发区金沙江路11号北京中长兴工
山东省 烟台市 莱阳市
联芸腾网络科技有限公司 (山东分公司)
龙门西路12号
山东省 烟台市 莱阳市
莱阳亚东生物科技有限公 司
龙门西路150号
山东省 烟台市 莱山区
烟台景明网络科技有限公 高新区航天路101号大创园二楼至五
司
楼
山东省 烟台市 芝罘区
烟台伟赞电子科技有限公 司
文化路与青华街交叉口北150米
烟台福松环保科技有限公 司
振华街885号
山东广电网络有限公司(海 阳分公司)
海阳路12号
烟台网亿网络科技有限公 司
峰山路1号烟台互联网智慧产业园
烟台伊思特硅胶科技有限 公司
环海路89号烟台保税港区
烟台鼎瑞信息科技有限公 司
龙门路28附近
嘉祐网络科技有限公司 永达街599号1楼
城信通网络科技(烟台)有 限公司
山东省 烟台市 招远市 山东省 烟台市 芝罘区 山东省 烟台市 莱山区 山东省 烟台市 福山区 山东省 烟台市 莱山区 山东省 烟台市 牟平区 山东省 烟台市 福山区 山东省 烟台市 芝罘区 山东省 烟台市 海阳市 山东省 烟台市 龙口市 山东省 烟台市 芝罘区 山东省 烟台市 芝罘区 山东省 烟台市 莱州市 山东省 烟台市 莱山区 山东省 烟台市 龙口市 山东省 烟台市 海阳市 山东省 烟台市 莱山区 山东省 烟台市 芝罘区 山东省 烟台市 莱山区 山东省 烟台市 莱山区 山东省 烟台市 海阳市 山东省 烟台市 海阳市
2020新版山东省烟台市龙口市文化传媒有限公司工商企业公司商家名录名单黄页联系电话号码地址大全73家
山东省 烟台市 龙口市
山东省 烟台市 龙口市
山东省 山东省 山东省
烟台市 烟台市 烟台市
龙口市 龙口市 龙口市
山东省 烟台市 龙口市
山东省 烟台市 山东省 烟台市 山东省 烟台市 山东省 烟台市
龙口市 龙口市 龙口市 龙口市
山东省 烟台市 龙口市
山东省 烟台市 龙口市 山东省 烟台市 龙口市 山东省 烟台市 龙口市 山东省 烟台市 龙口市 山东省 烟台市 龙口市 山东省 烟台市 龙口市
金辰景观
南山路龙族峰景一期西门南首
山东省 烟台市 龙口市
烟台发达锦程文化传媒有 限公司
龙族四期43号楼106室
山东省 烟台市 龙口市
龙口市众邦装饰工程有限 公司
胶东装饰材料市场南首201
山东省 烟台市 龙口市 山东省 烟台市 龙口市
昊大建筑装饰有限公司 振兴南路1383号附近 龙口市云天广告有限公司 南大街224号
蒂苑装饰有限公司
西海岸售楼处东
嘉美广告
通海路大店村128号
龙媒广告有限公司车间 -
烟台瑜鑫装饰工程有限公 司
龙城国际南门12-03商铺
龙口市众乂文化传媒有限 公司
正仁中央公元营销中心二楼
名艺装饰工程有限公司 碧海尚城A区D-003
山东灿煌文化传媒有限公 司
南山路28号松岚小区西门北100米
壹加壹装饰工程有限公司 五洲国际商贸城9-119
龙口市深建华辉装饰工程 有限公司
遇家村工业园
山东省 烟台市 龙口市 山东省 烟台市 龙口市 山东省 烟台市 龙口市 山东省 烟台市 龙口市
山东省 烟台市 龙口市
山东省 烟台市 龙口市
山东省 烟台市 龙口市
山东省 山东省 山东省
美图LS系列全光谱LED摄影棒灯使用说明书
LS 系列全光谱LED 摄影棒灯使用说明书感谢选用美图LS 系列全光谱（RGB）LED 摄影棒灯。
美图LS 系列全光谱（RGB）LED 摄影棒灯具有光线柔和，光效高，寿命长，色彩还原好等优点。
同时具有多种特效功能，并可通过手机APP 进行控制。
本灯可广泛应用于数码摄影及电影电视拍摄，演播室拍摄等摄影摄像创作中。
一． 产品结构二． 规格参数三． 使用方法1.开关机长按开关及模式按键（4）约2秒，可点亮LED 灯，再次长按约2秒可关机。
短按开关及模式按键（4）可选择灯光模式。
2.1色温模式（CCT）短按开关及模式按键（4），至屏幕左上角进入“CCT”色温模式。
按动切换按键（1）可选择屏幕参数，按动按键+(3)和按键-(2)， 可调节相应色温或功率。
① 功率调节显示 ② 色温显示 ③ 菜单显示-色温模式 ④ 组号显示 ⑤ 灯号显示 ⑥ 主从模式显示⑦ 电池电量显示(可工作时间显示)CCT:INT8000HUE:INT GEL:INT 1G#:M/S SAT BLUE 1/2 BLUE 3/4 BLUE L#011234567360°CCT G01 L01 M 1.5h HSI G01 L01 M 1.5h GEL G01 L01 M 1.5h EFX G01 L01 M 1.5hSET G01 L01 M 1.5h2.2 彩色模式（HSI） 短按开关及模式按键 按动切换按键（2）可选择屏幕参数，按动按键+(3)和按键可调节相应颜色、饱和度和功率。
CCT:INT 8000HUE:INT GEL:INT 1G#:M/S SAT BLUE 1/2 BLUE 3/4 BLUE L#0112345671234567360°CCT G01 L01 M 1.5hHSI G01 L01 M 1.5h GEL G01 L01 M 1.5hEFX G01 L01 M 1.5h SET G01 L01 M 1.5h 2.3滤镜模式（GEL） 短按开关及模式按键(4)，至屏幕左上角进入“GEL” 按动切换按键（1）可选择屏幕参数，按动按键+(3)和按键可选择所对应的滤镜模式和功率。
LED地砖屏显示屏视频处理器诺瓦科技NovaPro HD用户使用教程
Rev1.4.1 NS160100032StatementWelcome to use the product from Xi ’an NovaStar Tech Co., Ltd. (hereinafter referred to as “NovaStar ”). It is our great pleasure to offer this manual to help you understand and use the product. We strive for precision and reliability during the compilation of this manual, and the content of this manual are subject to change without notice. If you have any problem in use or you have any suggestion, pleaseFCC CautionAny Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.feel free to contact us according to the contact information provided in this manual. We will do our utmost to satisfy your needs. We would like to express our sincere thanks to your suggestions and make assessment for adoption as soon as possible.CopyrightAll the intellectual property rights involved in this document are reserved to NovaStar.Unauthorized duplication is a violation of applicable laws. Trademarkis the registered trademark of NovaStar.This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment .This equipment should be installed and operated with minimum distance 20cm betweenthe radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter Contents1SafetyStatement .............................................................................................................................12Overview ........................................................................................................................................ (2)3Appearance ................................................................................................................................... (3)3.1F ront Panel (3)3.2R ear Panel (5)4SignalConnection ..........................................................................................................................75Description of Operation Modes (8)6MachineOperation (9)6.1D escription of operation action (9)6.2M ain Interface (10)6.3S tep 1: Input Settings (11)6.4S tep 2: Screen Settings (12)6.5S tep 3: Brightness Control (15)6.6S tep 4: Output Settings (15)6.7D isplay Control (18)6.8A dvanced Settings (20)6.8.1Picture in Picture(PIP) (20)6.8.2AdvancedConfiguration (22)6.8.3Montage ............................................................................................................... (24)6.8.4Load CabinetFile (25)www.novastar.tech -1-6.8.5Alarm Threshold Settings ...................................................................................286.8.6Advanced Property ...............................................................................................286.8.7Save parameters to hardware ...........................................................................296.8.8Redundancy .............................................................................................................296.8.9DMX512 Channel Settings .................................................................................306.8.10Factory Reset (31)6.8.11Hardware version ..................................................................................................316.9C ommunication Settings (32)6.10Language Settings (32)7Web Interface Operation (33)7.1N etwork Establishment (33)7.2O perating Motion Description (33)7.3M y Device (35)8LCT Client Operation (36)9Firmware Upgrade (37)10Troubleshooting and Precautions (40)11Technical Specifications (42)12Installation Dimensions (45)-2- 1Safety StatementTo avoid potential hazards, please use this equipment according to the regulations. In case of damages, non-professionals are not allowed to disassemble it for maintenance without permission. Please contact the after-sales department of the company.2OverviewXi ’anNovaStarTechCo.,Ltd.NovaPro HD is a professional LED display controller. Besides the function of display control, it also features in powerful front-end processing. It has integrated various professional interfaces. With excellent image quality and free image control, NovaProHD has greatly satisfied the requirements of display industry. Product features:1) NovaPro HD has complete input interfaces including CVBS, VGA, SDI, DVI, HDMIand DP . These interfaces support input resolution up to 1080p@60Hz, highest pixel clock up to 165 MHz and output bandwidth up to 4 GBit.2) NovaPro HD has adopted 12 Bit digital processing internally. With advanceddeinterlacing motion self-adaptive processing technology adopted, images are clear and fine. Each input can be fully configured with contrast, saturation, hue,color temperature. It allows for switching between point-to-point display and point-bypoint scaling of input image according to display resolution.3) NovaPro HD doesn ’t need computer software for system configuration. Systemconfiguration can be completed only through one knob and one button. All operations can be done only by several steps. That's what we called “TouchTrack ”.4) NovaPro HD supports multiple units splicing.5) NovaPro HD has integrated DMX512 and GenLock input and loop interfaces.Professional control and synchronization have been provided. With the design of dual power redundancy backup, the system is stable and reliable. Optical fiberoutput has guaranteed the stability of long-distance data transmission.6) In addition to the operations of the controller and LCT client, y ou can alsoconfigure the system with browsers on your PC or PAD, namely, Web interface operation which is able to preview and assist with system settings in real time③: Option buttons of six input sources and below is corresponding indicator lights. Short press a button to set it as the input source of main screen while long pressto set as the source of PIP . Result of the operation can be viewed on operationscreen during setting.④：Operation screen (Please see details in the subsequent Chapter: Main Interface).⑤：Knob : Enter by pressing the knob and select or adjust by turning the knob. ⑥：ESC: Exit current operation or option.and confirm current working status of the system.Xi ’an3.2Rear Panel4Signal ConnectionSignal ConnectionConnect the required hardware devices referring to the interface descriptions in previous chapters.Note: Please turn OFF POWER before signal connection.Fig. 4-1 Signal ConnectionMultiple Units Connection Sketchoperating modes for users to choose in different occasions.Mode 1: Machine operation. All operations can be completed by a knob and a button on NovaPro HD without PC.Mode 2: Web operation. Suitable for the situation when NovaPro HD and control computer are in the same LAN. Open up a browser on control computer and enter the IP of NovaPro HD to log in control page.Mode 3: NovaLCT client operation. Connect NovaPro HD to control computer and allconfigurations can be completed on NovaLCT-Mars client. Then send to NovaPro HD. Note : Interlace operation of machine, LCT and Web is not allowed.【ESC 】: Return key, exit from current menu or operation. Please refer to the following chapter for detailed operation steps.Machine Operation Video Source Connection Fig. 4-2 Oversized Video Source Loading Scheme (4K)Cascade Control Signal Connection ...Option buttons of six input sources: Short press a button to set it as the input source of main screen while long press to set as the source of PIP.Lock: simultaneously press the knob and ESC button for more than three seconds to lock the controller.Unlocking: simultaneously press the knob and ESC button for more than three seconds to unlock the controller.6.2Main InterfaceAfter starting the controller, the main interface of LCD display is as follows:LED Output, Currently it is Port2 output.STATE:Status bar, meanings of each icon are described as below:It denotes that the controller is in primary control mode.First row:p roduct model, local IP/ device name (custom)OUTPUT:6.3 Step 1: Input SettingsSet the resolution of input source signal. Resolution can be directly set and changed through NovaPro HD for digital input modes: DVI, HDMI and DP . For other input modes, resolution can only be changed on input devices. Input resolution can be set through two ways: I : Preset ResolutionChoose a suitable resolution from the standard resolutions preset in the controller. Ifthere is no suitable resolution, please go to II: Custom ResolutionXi ’an6.4 Step 2: Screen SettingsPreconditions of screen settings:1) Each Ethernet port must load the same number of cabinets (If the number ofcabinets is not integer multiples of the Ethernet ports, the remaining cabinets will be loaded by the last Ethernet port);2) Regular screen, regular cabinets, each cabinet with the same size. Operating steps of screen settings:Step 1 Turn on the power of LED display. If the cabinets display normally, go to stepStep 4 Set Port1 Cabinet QTY. The device has some limitations on the cabinet quantity of network interfaces. For details, see precautions for screen setting a). The controller has certain limitations to the quantity of cabinet loaded by an Ethernet port. Please see details in Notes a) of Screen Settings. Step 5 Set data flow of the screen and please see the Notes c), d), e) of screen settings.2 . If the cabinets display abnormally, it is required to loadthe cabinet file first and save it to receiving card. Please see detailed operations in Advanced Settings . Step 2 E nter into the submenu of "Screen Settings" submenu. The options are shown in the following figure:Step 3 S et Cabinet Row QTY and Cabinet Column QTY according to the actualsituation of the screen. Xi ’anNovaStarTechCo., Ltd.NovaPro HD User's ManualLtd.6.5 Step 3: Brightness ControlReturn to main menu interface. Press the knob and select the corresponding value. At this time, the knob can be turned to adjust brightness value.III: Custom ScalingOperation: Enable Scaling and disable Auto Fit To Screen to customize scaling.E ffects of scaling disabledII: Output image is adjusted to the size of display screen, namely it is self-adaptive to the size of display screen.Operation: Enable scaling and auto fit to screen.Xi ’anNovaStarTechCo.,Ltd.size of LED display. After window is set, images can only be displayed within therange of the window and be self-adapted to the size of the window.Operating steps of custom scaling:a)Input Capture setting, i.e., to capture the part of the image from one start position of the input image and display it on the LED screen. It is needed to set horizontal width(≤horizontal resolution of input source) and vertical height(≤vertical resolution of input source) as well as start X(horizontal start) and start Y(vertical start).b) Output Window setting, size of the window is smaller than or equal to the Xi ’anNovaStarTechCo.,Ltd.After setting according to the above two steps, the captured content will be only NormalFreeze : same as the function of FRZ button.Black Out : same as the function of BLK button. Test PatternChannel EffectThe software supports three effects: cut, fade and pop-up. Select Off to if off to switch off Channel Effect.Picture quality adjustment Set contrast, saturation, hue, sharpness, color temperature, red brightness, green brightness, blue brightness and Gamma a s required . Save these parameters to hardware after adjusting to satisfaction NovaStarTechCo.,Ltd.displayed on the set area of the LED display, as shown below:Custom Scaling Effect6.7 Display ControlXi ’anNovaStarTechCo.,Ltd.6.8.1 Picture in Picture (PIP)To switch on or off PIP and set the input source of main screen as well as the size,position and transparency of PIP and PIP crop settings.Transparency: Transparency of PIP PIP Crop Settings:Image cropped from the set starting position will be displayed on PIP and its size is the set horizontal width and vertical height.Please enable this function before setting horizontal width, vertical height, start X and start Y.Advanced Config defaults to “Disabled ”. After the function is enabled, the rows and columns of the cabinets loaded by each port, offset, and data flow can be set respectively. PIP: Switching on/off PIP is the same as the function of PIP button on front panel and synchronous with it.Main source/PIP source: Input source switching of main screen and PIP is the same as the function of input source switching button on front panel.NovaStarTechCo.,Ltd.6. Advanced SettingsSeveral options of major functionare included in advanced settings, as shown in the figure below, including PIP , Advanced Configuration, Montage, etc. Operationof each function will be detailed for users in the following chapter.Xi ’anNovaStarTechCo.,Ltd.2)Ethernet Port Settings -16--17-Port Settings are completed, select "Apply " and press the knob to apply current settings. If you want to quit the settings, select “Return ”.Montage Example: the total number of pixels of the LED display is 4000×1000, which has exceeded the load of a single Pro HD unit. Montage can be applied and two ProHD units can be used for montage. See detailed parameter settings and the connections in the chart and figure below.6.8. MontageFor oversized LED display, two or more NovaPro HD units are needed for montage. In this case, the loading area of each NovaPro HD unit needs to be set respectively. Enable Montage first and set total width and height of the LED display. Then set the size and starting position of loading area of the NovaPro HD unit.Total sizes of loading area of all NovaPro HD units are the total sizes of LED display.Xi ’anNovaStarTechCo.,Ltd.as w-18-Connect NovaPro HD to PC and run NovaLCT-Mars on PC. Import cabinet configuration file saved before into the controller. 1) Save cabinet configuration fileAfter receiving card is configured, click Save File to save cabinet configuration file (.rcfg) to local file on PC.2) Import cabinet configuration file into NovaPro HD. Operating steps are shown in the figure below:Total Width(H) 4000 Total Height(V)1000 Load Area Width2000 Load Area Height 1000 Load Area X 0 Load Area YLtd.TechCo.,Ltd.Montage Connections (referring to the Chapter: Signal Connection)Note : If montage is to be enabled, please ensure Output Settings is in the third case: Custom Scaling, namely, set Scaling as enable while Custom Scaling as disable.6.8.4 Load Cabinet FileXi ’anNovaStarTech -19-3) Load Cabinet File6.8.5 Alarm Threshold SettingsIncluding following functions: VGA Auto Adj: sampling parameters of VGA input signal are automatically adjusted so that VGA image is clear and complete. Select this menu and then press the knob once to perform VGA automatic adjustment once.ADC Calibration: Images will be color cast or darker etc. when analog signal is accessed into processors without ADCcalibration. NovaPro HD is able to automatically perform ADC calibration based on input analog signal (including CVBS6.8.8 RedundancySet this controller as primary control or backup. “Primary ” or “Backup ” will bedisplayed on the main interface.and VGA) to solve above problems. Select this menu and then press the knob onceto perform ADC calibration once.DNR Settings: Ii s available when image input port is not VGA and there are five modes of noise reduction: "Off", "Auto", "Low", "Medium" and "High". 6.8. Save parameters to hardwareSave all the configurations of NovaPro HD to hardware and the data will not be lostafter power off.NovaStarTechCo., Ltd. Set the threshold values of temperature and voltage. When temperature or voltage NovaPro HD exceeds the threshold value, temperature or voltage on the home page of the screen will turn red and blink. 6.8. Advanced PropertyXi ’anNovaStarTechCo., Ltd.-20-4 Color temperature5 Red component brightness6 Green component brightness7 Blue component brightness8Gamma9 UndefinedUndefined Ltd.Definitions of channel properties are shown in the table below: anNovaStarNovaPro HD User's Manual-21-Xi ’an6.8.10 Factory ResetRestore NovaPro HD to factory settings.6.8.11 Hardware versionView hardware version of NovaPro HD.6.9 Communication SettingsSet communication mode and network parameters of NovaPro HD.There are two communication modes, one is USB Preferred and the other is LAN Preferred. If both USB and LAN port are connected to control computer and LAN Preferred is selected, system will use LAN to control. If only USB port is connected, the1 Web Interface Operation1.2 Operating Motion DescriptionThe Web interface of Pro HD is shown as the picture below. Compared with controller operation, the operation with Web interface is more intuitional and clearer.setting will be unavailable and system will use USB to control. Network modes include “ M anually ” and “ A u tomatically ”. It is obtained through DHCP while in “ Automatically ” mode. 6.10 Language SettingsXi ’anNovaStarTechCo.,Ltd.-22-Access Web control interface of Pro HD through browser. Main operating steps,functions and corresponding parameter configuration requirements are the same asmotion description and features of Web interface operations . Please refer to therelevant chapters of controller operation for specific parameter configurations andconfiguration requirements.7. Network Establishment1) Connect Pro HD to the same LAN and network segment as the control computer.2)Turn on the power of Pro HD and set communication settings on the referring to 7. Communication Setting. Local IP c an be obtained automatically or manually if you know the IP address.3)Open up the browser on control computer. Enter the local IP of Pro HD and Xi ’anNovaStarTechCo.,Ltd.-23- the operation of the controller. This chapter only covers network establishment,open up the web configuration interface.enter “Advanced Settings ” → “PIP ” sub menu interface settings, as shown in the figure below.Three display control buttons: the indicator lights default to blue and turn greenCo.,Ltd. Toolbar : The toolbar will be highlighted when you move the mouse over it. By clicking the toolbar, you can get into the configuration pages of sub menus. Thefunctions are the same as the menus in the bottom left of the page.Menu bar: click the mouse and enter the parameter configuration interface in the NovaStarTechCo.,Ltd.-24-Operation interface of LCT client is shown as the figure below:on. Choose whether to upgrade or not according to prompt.2) Upgrading firmware by LCT clientConnect Pro HD to PC and run NovaLCT-Mars on PC. Log in advanced user and the password is “admin ”. Then click “admin ” on you keyboard after logging in and the program loading page will pop up.Program path: Select the hardware program to be upgrade currently.Sending card: Check to update all the programs of sending card. FPGA of receiving card: Check to update FPGA program of receiving card. Update: Change hardware program into hardware device.Refresh all: Check this option and click Refresh to refresh and display the program versions of all sending card and receiving card of current serial port.Set refresh: Click “Refresh ” to set refresh and display the version information of one receiving card. ProblemSolutionCo.,Xi ’anNovaStarTechCo.,Ltd.Xi ’an NovaStarTechCo.,Ltd.9 Firmware UpgradeThere are two ways to upgrade the firmware of Pro HD: upgrade by U disk and LCT client.1) Upgrading firmware by U disk Firmware upgrade by U disk must meet two conditions:a The format of the U-disk must be FAT12/16/32 。
学校三个活动的简报标题怎么写
学校三个活动的简报标题怎么写1.今年12·4是第XX个国家宪法日，也是第XX个全国法制宣传日。
为深入开展宪法宣传教育，我校依托法学院专业资源，围绕“弘扬宪法精神，推进创新·协调·绿色·开放·共享发展”主题，开展了丰富多彩、形式多样的普法宣传活动。
12月2日下午，50余名学生共赴烟台市中级人民法院旁听了一场案件的庭审。
零距离接触“民事立案”“商事立案”“再审立案”等工作窗口，参观了烟台市中级人民法院案例文化长廊、优秀法官展览、院史陈列馆等场馆。
法治之根植心田，文明之风拂校园。
12月4日中午，法学院学生志愿者携带提前制作的“国家宪法日”主题宣传单、书签等物品，在七餐附近设置咨询台，进行法律咨询与普法宣传活动。
志愿者一边向过路的同学发放宣传页，一边热情地为同学们提供法律咨询。
当晚，法学院还举办了“我心中的十大法治新闻”座谈活动。
内容既有当下热点“专车合法化问题”“宜宾首富杀人案”“定制龙凤胎”等，也有触及民生的“农民工跳楼讨薪”“毒跑道事件”，更有“呼格吉勒图案”“反家暴立法工作突破”等深刻话题。
法学院金福海、熊德中老师对同学们的每件作品进行了点评。
法学院王加卫副教授还以“中国古代宪制”为题主讲“宪法日”讲座。
熠熠韶华文艺部落与红影协会联合举办的“全国法制宣传日之让法制走进生活”话剧也在法学院二楼多媒体同步上演。
学与法并肩，理论与实践兼备。
12月5日，第三届烟台大学法律知识竞赛总决赛在法学院二楼多媒体报告厅落下帷幕。
通过专场报告会、法治主题访谈、法律知识竞赛、法律进校园、模拟法庭实践等活动，进一步增强了全校师生的法制意识、规则意识，浓厚了学法、尊法、守法、用法的氛围。
2.为积极配合国家网络安全宣传周活动，增强广大师生网络安全意识，提高网络安全防护技能，9月20日中午，学校党委宣传统战部联合实用工艺美术系在学生餐厅门口举行了以“网络安全为人民网络安全靠人民”为主题的宣传教育活动。
2012年山东省重点项目详细
第2页
总投资 序号 企业名称 项目名称 其中固定资 其中申请 产投资 贷款 32000 16000 5000 39000 2500 12000 15500 45000 62000 16000 19644 17600 5200 5000 5000 3200 2004 5000 3488 2000 30000 7000 8035 2000 103112 61803 56000 29633 12500 4500 35599 2100 11000 10000 30000 44803 14449 10650 12650 3600 3000 3500 3200 1865 3000 3300 1600 20000 5000 7135 1600 72000 60580 52150 3000 500 23380 4200 2000 1000 2000 3000 1000 12000 2000 1000 24000 1500 9000 5000 20000 40000 9500 销售收入 66700 38200 9000 200000 1642 34000 35000 300000 349200 2979 100000 30000 15000 8000 14000 20000 3260 10000 9000 2400 100000 10800 18000 1800 212000 64600 77000
总投资 序号 企业名称 项目名称 其中固定资 其中申请 产投资 贷款 25502 2000 12000 25000 8000 6007 2279 5978 1900 5000 20000 26000 5750 4670 4500 16000 36000 8600 30000 8000 37182 1200 2000 13000 13000 20000 20000 24267 1800 11300 22700 3000 5413 1981 3978 1500 4500 15000 15400 4050 3269 3600 9200 25200 5300 27605 4000 26987 900 1600 11540 10840 18000 14000 4000 20000 4000 1200 300 500 3000 9000 7000 4000 2500 3000 2000 14400 1000 6500 7500 2000 1000 1200 2000 300 3500 5000 销售收入 48590 2400 6700 36000 15349 4203 3809 5000 5510 16800 42000 18900 7680 6144 6100 30000 11000 15000 53200 13600 98000 4530 4000 18000 50000 48000 42000
2020新版山东省烟台市莱州市图文工商企业公司商家名录名单黄页联系电话号码地址大全58家
山东省 烟台市 莱州市 金辉文印
文昌路街道文昌北路1433号
山东省 烟台市 莱州市 打字复印
217省道东50米
山东省 烟台市 莱州市 恩优家复印
西苑路683号附近
山东省 烟台市 莱州市 友邦彩印
文化西路138号永信商务楼
山东省 烟台市 莱州市 中懿婚庆照相复印
顺利路朱桥镇苗家幼儿园北450米
山东省 烟台市 莱州市 弘远打字复印
山东省 烟台市 莱州市 写真喷画
云峰北路343号
山东省 烟台市 莱州市 中山图文社
文泉东街与鼓楼街交叉口西北50米
山东省 烟台市 莱州市 鸿铭图文
218省道西50米
山东省 烟台市 莱州市 宏睿设计
教育路小区中心广场后西北角721门 头房申通快递北邻
山东省 烟台市 莱州市 证件快照打字复印
文化东街580-582号附近
数据格式为常用办公软件excel（wps也可以打开），方便筛选和使用，推荐下载使用！
本数据包含以下字段：省，市，县，商家名称，商家地址，商家联系号码
近期最新搜集整理，预览显示不完整，下载后查看完整数据！
省/市
市 区（县）
商家名称
商家地址
山东省 烟台市 莱州市 打字复印
五里街
山东省 烟台市 莱州市 文彩广告
水兴复印店
府前西街1056-10号
小林印务
莱州北路金都花园47号
晨星打字复印
建新东街58号
科源打字复印社
文泉东路152号
泽信打字复印
莱州北路733号
月季园复印部
莱州南路26号
奔图打印
光州东街679号
梅华彩印复印中心
-
复印
金城大街463号附近
烟台城市宣传语
烟台城市宣传语
1. 烟台，海韵之城，品味生活之港。
2. 烟台，山海之间，自然之美，人文之韵。
3. 烟台，渤海明珠，魅力无限，精彩无限。
4. 烟台，与海共舞，创新之城，活力之港。
5. 烟台，美丽的海滨城市，等待你的发现与探索。
6. 烟台，宜居之城，绿色家园，温馨港湾。
7. 烟台，海的诗篇，山的传奇，待你续写。
8. 烟台，渤海之滨，美食之都，文化之源。
9. 烟台，山海交融，历史与现代的完美结合。
10. 烟台，美丽的海滨城市，等你来感受海的魅力。
11. 烟台，繁华与自然和谐共存，让你流连忘返。
12. 烟台，海的乐章，山的画卷，生活的舞台。
13. 烟台，历史与现代交融的城市，等待你的发现。
14. 烟台，美丽的海滨城市，让你感受家的温暖。
15. 烟台，山海之间，文化之城，美食之都。
烟台市城市规划展览馆
通过这次参观烟台规划展，让我了解到很多烟台的文化和历
史，相信通过规划展的展示会让很多像我一样非烟台本地的 人了解到烟台的发展和历史文化。了解到很多烟台已经建成 或正在施工的很多重要的大型建筑，了解到很多烟台近年来 新规划的居住小区和一些相关的信息，从我们的专业上来讲， 也让我受益匪浅。 对于我们相关专业的学生来说，看规划展中的模型真的算是 一种享受。但不可否认的是，那些模型到真正施工建成之后 就会有很多新问题出现，比如建筑周边的环境、道路交通、 公共设施以及建筑物的施工水平等等。不能不说烟台未来的 城市建设还有待于提高。
一层主要展示烟台作 为一座历史文化名城 在各个历史时期的发 展历程，分别通过图 版、全息投影、万花 筒、3D多媒体、模型 和老照片等形式对史 前烟台、古代烟台、 近代烟台、烟台特色 建筑和宗教文化等内 容进行展示
二层主要展示了 烟台中心城区及 各县市区规划建 设现状及规划情 况，本厅用大量 的图片和文字资 料展示了烟台市 现阶段的规划建 设成就，对总体 规划情况进行了 介绍。
烟台市城市规划展览馆
宏伟的烟台城市大沙盘
烟台市城市规划展览馆
展馆内局部
烟台市城市规划展览馆
馆共分为三层，设烟 台历史展厅、烟台规划 现状展厅和烟台未来规 划展厅。展览通过图版 展示、电子书、显示屏、 全息投影、模型和4D动 感影院等方式全面介绍 了城市的起源、形成、 演变及发展过程，展示 了烟台这座文化古城、 山水名城、宜居城市的 悠久历史和当今城市规 划建设伟大成就，以及 未来的发展目标。
三层展厅为烟台市未来规划展厅，主要展示内容分两大部分，一是
烟台市城市总体规划大模型。该模型采用声光电等技术，配合解说 词，直观地展示了烟台市城市规划的美好蓝图，全面反映了烟台市 城市规划方向和意图。大模型按照1：1000比例制作，面积达1100 平方米；二是4D动感多媒体影院。该影院是全国唯一一座球形幕 动感影院，影院通过全景式三维动画系统，实现了城市变迁、发展 历程、规划成果展示的信息化，运用数码剪辑合成等技术，集中展 示烟台市的城市风貌及其未来风光。通过虚拟影像系统，让观众从 空中、海上等各个角度感受烟台。通过虚拟现实仿真技术，使人们 身临其境地领略了烟台未来的美好前景。
新版山东省烟台市福山区打印企业公司商家户名录单联系方式地址大全65家
福一刻章
崇文街85号同福小区正对面五环 小区入口
山东省 烟台市 福山区 阳光彩印店
开发区,福莱山街道办事处(烟台 开发区)开发区金城小区27-1-1
山东省 烟台市 福山区
福山区清洋晟锐图文广 告设计中心
西山路193-24号
山东省 烟台市 福山区 山东省 烟台市 福山区 山东省 烟台市 福山区 山东省 烟台市 福山区
山东省 山东省 山东省
烟台市 烟台市 烟台市
福山区 福山区 福山区
众意广告
永俊图文 福星印刷 君艺广告(长江路)
金胜社区服务中心
礼品复印 鑫辉印务社 帅帅文具复印照相
县府街525福鑫创业园东10米路 南综合楼一楼西起第一二间门市 东华街与县府街交叉口西南100 米 松霞路158-33号 珠江路40号
山东省 烟台市 福山区 山东省 烟台市 福山区
山东省 烟台市 福山区
山东省 山东省 山东省
烟台市 烟台市 烟台市
福山区 福山区 福山区
山东省 烟台市 福山区
美途打印
崇文街87号(聚福来布艺东20米)
燕梅图文广告
福莱山街道珠江路40-1号地源大 厦图文广告
彩虹图文广告(香山店) 香山路8号香山花园4-4号
小于复印社
县府街382号
打字复印
古现大街1号附近
图文广告
福莱山街道金沙江路159-3号
大晟广告
开发区淮河路万达华府2-113号
金英刻印社 百鸽图文 亿诚广告传媒
松霞路175附近 福莱山街道办事处(烟台开发区)
开发区长江路10号银和广场1楼
东 开发区福莱山街道鑫发小区西区
中门南100米
鑫方圆不干胶印务 锐彩照相复印 雅瀚图片社 德禄广告 仁和图文广告 广艺图文快印 灵风广告店
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
序号位置图片地址
1北马路汽车站
北马路与环海路交界处
（北马路汽车站西）
2三站市场
北马路与青年路交界处
（汇通市场楼体）
3三站小商品批发市场前进路与青年路交界处
4凯旋SOHO楼顶
青年路与西大街交界处
（汽车总站对面）
烟台LED彩屏汇总
5御金台
青年路与南大街交界处
（华美整形医院）
6芝罘区银座商城南大街与大海阳路交界处
7芝罘区大润发南大街与大海阳路交界处
8南大街购物城南大街与海港路交界处
9振华商厦东门对面海阳路与南洪街交界处
10振华购物中心南大街振华购物中心楼体
11碧海大厦南大街与西南河交界处
12天鸿凯旋城南大街天鸿凯旋城楼体
13虹口大厦二马路与大马路交界处
14国贸大厦南大街与解放路交界处
状态
正常
正常
正常
正常
正常
停运
（芝罘区繁华
区域主要路
口，位置优）
停运
正常
正常
停运
正常
停运
正常
（芝罘区通往
莱山区必经路
口，位置优）
正常
（莱山区通往
芝罘区主要路
口，位置好）