EW162C0GR中文资料
EW162A0GR中文资料

162A0(REFLECTIVE TYPES)
3
Polarizer
Mode Backlight Code R
value
Reflective
Module
type : D : TN Character Modules W : Wide Temp. Modules
E D 16 2 A0 T R *
Viewing direction NIL. : 6 o'clock U : 12 o'clock
W.T. - 2 0 ℃
NOTE ( 2 ) , ( 3 ) WITHOUT CONDENSATION
4 . 9 m /s2 (0.5G) 2 9 . 4 m /s2 ― (3G) NOT ACCEPTABLE
1 9 . 6 m /s2 (2G) 4 9 0 . 0 m /s2 ― (50G) NOT ACCEPTABLE
POWER SUPPLY FOR LOGIC POWER SUPPLY FOR LCD DRIVE INPUT VOLTAGE STATIC ELECTRICITY
NOTE ( 1 ) : TEST METHOD AND CONDITIONS : AFTER CHARGING UP 200 PF CAPACITOR BY STATED VOLTAGE , THE CAPACITOR IS CONNECTED WITH INTERFACE PINS OF THE MODULE .
5.
OPTICAL CHARACTERISTICS .
TN STN TN STN N.T. SYMBOL ∅ 2-∅ 1 K tr ( rise ) tf ( fall ) tr ( rise ) ∅ θ tf ( fall ) ∅ θ Ta = 25℃ VDD = 5 . 0 V CONDITION MIN . TYP . MAX . UNIT NOTE K≧ 1.4 20 deg. 1 30 deg. 1 3 1 ∅ = 25°,θ = ** 5 1 ∅ = 10°,θ = 0° 150 250 = 25° Ta = 25℃ 100 150 = ** Ta = 25℃ Ta = -20℃ 5538 Ta = 25℃ 228 ms 1 104 = 10° Ta = 70℃ 2316 = 0° Ta = -20℃ Ta = 25℃ 174 Ta = 70℃ 85
艾膈xStorage家型单相,3.6kW,4.2kWh,AC耦合,灰色 蜂窝模式,PV6说明书

Eaton XSTH1P0361UC3EV2Eaton xStorage Home single-phase, 3.6 kW, 4.2 kWh, AC coupled, Grey/Honeycomb, PV 6General specificationsEaton xStorage Home single-phase XSTH1P0361UC3EV2XST 1Ph 3.6kW 4.2kWh Grey/Honeycomb3553340100666890 mm1230 mm 220 mm 159 kgCE Marked CE LVD RoHS CompliantEN 61000-6-3 EN 61000-6-2EN 62109 (part 1:2010, part 2:2011)Product NameCatalog Number Model CodeEANProduct Length/Depth Product Height Product Width Product Weight Compliances Certifications0.99 (Grid-Tie), 0.8 (ind) - 0.8 (cap) (Grid Tie-PF regulation, Off-Grid)3,6 kW17.4 A230V97%Residual current circuit breaker (RCCB)Overload-/temperature protectionShort-circuit protectedBuilt-in batteryWith data loggingEthernetWLANEmergency power compatible3600 VA550 V20 AIP20Power metering of critical loads and PV production Eaton xstorage Home Brochure enxStorage Home BrochurexStorage Home Product team guidelinesxStorage Home Installation manualEaton xStorage Home Quick Start Guide xStorage Home User Interface Manual xStorage Home User manualEaton xStorage Home Safety GuidelinesHow to onboard xStorage Home into the Cloud xStorage Home - Technical data sheetOutput power factorPower rangeAC current - maxAC inputEfficiency (PV to grid) - max Fitted with:Nominal output powerDC voltage on PV input - max Input Current on PV Input – Max Degree of ProtectionLED indicator colorMetering capability BrochuresCase studiesManuals and user guidesMultimediaTechnical data sheetsGreen (ON): Normal status. Red (ON): Fault status. Inverter is unable to connect to the grid.Green (Blinking): Communication activitySpecial featuresThe xStorage Home system offers three different power inverter ranges.Nominal DC Operating Voltage – Max550 VCoolingNatural airflowStorage temperature - max40 °CTopologyTransformerlessBattery nominal capacity4,2 kWhProtective classIAC wiring systemsSingle phase/N/PE, TN, TT, IT (additional fuse or CB required)Relative humidity - min5 %C/D DC current - Max70 ANominal AC output current15.6 AStandby losses< 10WStorage temperature - min-10 °CDC battery voltage - min74.4 VOver voltage categoryOVC II (PV and Battery), OVC III (AC grid/load)PhaseSingle phaseOperating temperature - min0 °CRelative humidity - maxEfficiency (Battery to AC) - Max>90%Grid integrationDC and AC coupledNumber of MPPT Trackers2Noise level35 dB (indoor application)Rated MPP-voltage – min240 VMaterial coverPlasticNominal DC Operating Voltage – Min 100 VPower consumption3.6 kWOperating temperature - max30 °CHazard substance restrictionLead free, compliance with RoHS GP2Initial feeding voltage150 VProtocolHTTPAPIRESTMPPT efficiency> 99%Recommended PV power3 kWp - 7 kWpSolar DC switchYesNominal AC grid voltage230 V (Grid-Tie), 230 V ± 3 % (Off-Grid)DC battery voltage - max98.4 VEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All rights reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia35 A90 V< 3%AC Synchronized operation 50 Hz / 60 Hz ± 1 Hz 2000 m Standard550 VBattery voltage rating Total Harmonic Distortion (THD)Nominal frequencyAltitude Display Rated MPP-voltage – max。
GB162G资料

JEWEL HILL ELECTRONIC CO.,LTDJEWEL HILL ELECTRONIC CO.,LTD.SPECIFICATIONS FORLCD MODULEModule No. GB162GOffice Address: Rm. 518,5/F., 101 Shangbu Industrial District,HuaqiangNorthRoad, Shenzhen, ChinaTEL : (86)-755-83362489 83617492FAX: (86)-755-83286396 83365871E-mail: sales@jhlcd@Website: TABLE OF CONTENTSLCM NUMBER SYSTEM (2)1. GENERAL DESCRIPTION (3)2. FEATURES (3)3. MECHANICAL SPECIFICATION (3)4. MECHANICAL DIMENSION (4)5. MAXIMUM RATINGS (5)6. ELECTRICAL CHARACTERISTICS (5)7. MODULE FUNCTION DESCRIPTION (6)8. ELECTRO-OPTICAL CHARACTERISTICS (12)9. RELIABILITY (16)10. PRECAUTIONS FOR USING LCD MODULES (17)11. USING LCD MODULES (19)12. REVISION HISTORY (21)SAMPLE APPROVED REPORT (22)LCM Number SystemNUMBER OF CHAR. PER LINE F: FSTN; X: OTHER VERSION NUMBER: V00~V99IC TYPE:VIEWING DIRECTION:TEMPERATURE RANGE:BACKLIGHT TYPE:SERIAL NUMBER: A~ZGRAPHIC MODULEs: NUMBER OF COMMONs GRAPHIC MODULEs:NUMBER OF SEGMENTs COB & SMT LCMBACKLIGHT COLOR:CHARACTER MODULEs:CHARACTER MODULEs: NUMBER OF LINE G: REFLECTIVE,NONE BACKLIGHT A: TRANSFLECTIVE, EL BACKLIGHT B: TRANSMISSIVE, EL BACKLIGHT C: TRANSFLECTIVE, LED BACKLIGHT D: TRANSMISSIVE, LED BACKLIGHT E: TRANSFLECTIVE, CCFL BACKLIGHT F: TRANSMISSIVE, CCFL BACKLIGHT A: AMBER; B: BLUE; Y: YELLOW-GREEN R: RED; W: WHITE; O: THER COLOR N: NORMAL TEMPERATURE RANGE U: UPPER(12:00); D: DOWN(6:00)L: LEFT(9:00); R: RIGHT(3:00);A: BONDING IC, WITH CONTROLLER B: BONDING IC, WITHOUT CONTROLLER C: SMT IC, WITH CONTROLLER D: SMT IC, WITHOUT CONTROLLER O: OTHER TYPEW: BLACK-WHITE; O: OTHER G: GRAY; Y: YELLOW-GREEN; B: BLUE; LCD COLOR MODE:N: TN; H: HTN; S: STN LCD TYPE:S: SUPER WIDE TEMPERATURE RANGE W: WIDE TEMPERATURE RANGEM: MIDDLE TEMPERATURE RANGE1. GENERAL DESCRIPTIONThe GB162G is a 16C x 2L Character LCD module. It has a STN panel composed of 80 segments and16 commons. The LCM can be easily accessed by micro-controller via parallel interface.2. FEATURESTransflective and positiveDisplay ModeSTN(Yellow - Green) moduleDisplay Format Character 16C x 2LInput Data 8/4-bit parallel data input from MPUMultiplexing Ratio 1/16 DutyBiasBias 1/5Viewing Direction 6 O’clockBacklight LED3. MECHANICAL SPECIFICATIONItem Specifications Unit Dimensional outline 80.0 x 36.0 x 12.7(max) mmResolution 80segs x 16coms dotsActive area 57.7(W) x 9.4(H) mmChar. pitch 3.65(W) x 5.05(H) mmChar. pitch 2.95(W) x 4.35(H) mmDots pitch 0.6 (W)×0.55(H) mmDots size 0. 55(W)×0.5(H) mm4. MECHANICAL DIMENSION5. MAXIMUM RATINGSItem Symbol Min Max Unit NoteV DD - V ss -0.3 7.0 V Supply voltage V LCD -0.3 13.0 V Input Voltage V IN -0.3 V DD +0.3 VOperating temperature T OPR -10 +60 Storage temperature T STR -20 +70Humidity --- --- 90 %RH6. ELECTRICAL CHARACTERISTICSItem SymbolCondition Min. Typ. Max. UnitSupply Voltage Logic V DD---2.73.0 5.5 VH level V IH 0.8V DD --- V DDInput VoltageL levelV IL --- V SS --- 0.2V DDVCurrent Consumption(LCD DRIVER)I DDV DD =3.0V;V LCD =4.7V,T amb =25 ;--- --- 5.0 mALCD Driving Voltage V LCDBias=1/5V LCD =V DD -V 5--- 4.7 --- VCurrent Consumption (With LED BackLight)I LEDV LED =4.2V,T amb =25 ;--- --- 300 mA7. MODULE FUNCTION DESCRIPTION7.1. PIN DESCRIPTIONPin No. Symbol Description1 VSSPower supply for Ground2 VDDPower supply for positive3 VOVLCD voltage regulation terminal4 RSData/Command register selection; “H”: Data; “L”: Command5 R/WRead/write selection signal, ”H”: Read; ”L”: Write6 ERead/write Enable signal input terminal7 DB08 DB19 DB210 DB38-bit bi-directional data bus11 DB412 DB513 DB614 DB715 LED+Power supply voltage for backlight positive16 LED-Power supply voltage for backlight negative7.2 TIMING CHARACTERISTICS1. SYSTEM BUS CHARACTERISTIC7.3 APPLICATION OF LCMReference circuitCircuit Block Diagram7.4 TABLE OF COMMAND7.5 CHARACTER GENERATOR ROM8. ELECTRO-OPTICAL CHARACTERISTICSItem Symbol Condition Temp Min Typ. Max UnitsNote0 --- 4.9 ---25 4.2 4.7 5.0 LCD driving voltageV LCD = = 0 BIAS=1/550 --- 4.5 --- V NOTE1Rise Time (Tr) --- --- -- Decay Time (Tf)0 --- ---- --- Rise Time (Tr) --- 225 340Decay Time (Tf) 25 --- 240 360Rise Time (Tr) --- --- -- Response TimeDecay Time (Tf)= = 0 50 --- --- --msec NOTE2Contrast Ratio Cr= = 0 255 10 --- --- NOTE4Viewing AngleRange( = 0°)(6”) = 90°(3”) =180°(12”) =270°(9”)(25 ) CR ≥245 25 20 30DegNOTE3z For panel only․Electro-Optical Characteristics Measuring Equipment(DMS501)SystemIllumination (D65)․Note 1. Definition of Driving Voltage( Vlcd) :․Note 3. Definition of Viewing Angle and :․Note 4. Definition of Contrast ratio( CR) :Brightness of Non-selected Segment (B2)Brightness of Selected Segment (B1)CR =V,maxCR,maxDriving VoltageB r i gh t n e s s (%)Brightness Curve forSelected Segment0%=90 =270Viewing Direction 6 O’clock DirectionNormal :9. RELIABILITY9.1. MTBFThe LCD module shall be designed to meet a minimum MTBF value of 50000 hours with normal. (25°C in the room without sunlight)9.2. TESTSNO. ITEM CONDITION CRITERION1 High Temperature Operating 60 120Hrs2 Low Temperature Operating -10 120Hrs3High Temperature/Humidity Non-Operating60 ,90%RH ,120 Hrs4 High TemperatureNon-Operating70 120Hrs5 Low TemperatureNon-Operating-20 120Hrs6 Temperature CyclingNon-Operating-10 (30Min )↔ 60 (30Min)10 CYCLESNo Defect OfOperational Function InRoom Temperature AreAllowable.IDD of LCM inPre-and post-test shouldfollow specificationNotes: Judgments should be mode after exposure in room temperature for two hours.10. PRECAUTIONS FOR USING LCD MODULES10.1. HANDLING PRECAUTIONS(1) The display panel is made of glass. Do not subject it to a mechanical shock or impact by droppingit.(2) If the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any inyour mouth. If the substance contacts your skin or clothes, wash it off using soap and water.(3) Do not apply excessive force to the display surface or the adjoining areas since this may cause thecolor tone to vary.(4) The polarizer covering the display surface of the LCD module is soft and easily scratched. Handlethis polarizer carefully.(5) If the display surface becomes contaminated, breathe on the surface and gently wipe it with a softdry cloth. If it is heavily contaminated, moisten a cloth with one of the following solvents: - Isopropyl alcohol- Ethyl alcohol(6) Solvents other than those above mentioned may damage the polarizer.Especially, do not use the following:- Water- Ketone- Aromatic solvents(7) Extra care to minimize corrosion of the electrode. Water droplets, moisture condensation or acurrent flow in a high-humidity environment accelerates corrosion of the electrode.(8) Install the LCD Module by using the mounting holes. When mounting the LCD Module, makesure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/Ocable or the backlight cable.(9) Do not attempt to disassemble or process the LCD Module.(10) NC terminal should be open. Do not connect anything.(11) If the logic circuit power is off, do not apply the input signals.(12) To prevent destruction of the elements by static electricity, be careful to maintain an optimumwork environment.- Be sure to ground the body when handling he LCD Module.- Tools required for assembling, such as soldering irons, must be properly grounded.-To reduce the amount of static electricity generated, do not conduct assembling and other workunder dry conditions.-The LCD Module is coated with a film to protect the display surface. Exercise care when peeling off this protective film since static electricity may be generated.10.2. STORAGE CONDITIONSWhen storing, avoid the LCD module to be exposed to direct sunlight of fluorescent lamps. For stability, to keep it away form high temperature and high humidity environment (The best condition is : 23±5°C, 45±20%RH). ESD protection is necessary for long-term storage also.10.3. OTHERSLiquid crystals solidify under low temperature (below the storage temperature range) leading to defective orientation or the generation of air bubbles (black or white). Air bubbles may also be generated if the module is subject to a low temperature.If the LCD Module have been operating for a long time showing the same display patterns the display patterns may remain on the screen as ghost images and a slight contrast irregularity may also appear.A normal operating status can be recovered by suspending use for some time. It should be noted that this phenomenon does not adversely affect performance reliability.To minimize the performance degradation of the LCD Module resulting from destruction caused by static electricity etc. exercise care to avoid holding the following sections when handling the modules.- Exposed area of the printed circuit board.- Terminal electrode sections.11. Using LCD modules11.1 LIQUID CRYSTAL DISPLAY MODULESLCD is composed of glass and polarizer. Pay attention to the following items when handling.(1) Please keep the temperature within specified range for use and storage. Polarization degradation,bubble generation or polarizer peel-off may occur with high temperature and high humidity.(2) Do not touch, push or rub the exposed polarizers with anything harder than a HB pencil lead (glass,tweezers, etc).(3) N-hexane is recommended for cleaning the adhesives used to attach front/rear polarizers andreflectors made of organic substances, which will be damaged by chemicals such as acetone, toluene, toluene, ethanol and isopropyl alcohol.(4) When the display surface becomes dusty, wipe gently with absorbent cotton or other soft materiallike chamois soaked in petroleum ether. Do not scrub hard to avoid damaging the display surface.(5) Wipe off saliva or water drops immediately, contact with water over a long period of time maycause deformation or color fading.(6) Avoid contacting oil and fats.(7) Condensation on the surface and contact with terminals due to cold will damage, stain orpolarizers. After products are tested at low temperature they must be warmed up in a container before coming is contacting with room temperature air.(8) Do not put or attach anything on the display area to avoid leaving marks on.(9) Do not touch the display with bare hands. This will stain the display area and degrade insulationbetween terminals (some cosmetics are determinate to the polarizers).(10)As glass is fragile, it tends to become or chipped during handling especially on the edges. Pleaseavoid dropping or jarring.11.2 INSTALLING LCD MODULEAttend to the following items when installing the LCM.(1) Cover the surface with a transparent protective plate to protect the polarizer and LC cell.(2) When assembling the LCM into other equipment, the spacer to the bit between the LCM and thefitting plate should have enough height to avoid causing stress to the module surface, refer to the individual specifications for measurements. The measurement tolerance should be ±0.1mm.11.3 ELECTRO-STATIC DISCHARGE CONTROLSince this module uses a CMOS LSI, the same careful attention should be paid for electrostatic discharge as for an ordinary CMOS IC.(1) Make certain that you are grounded when handing LCM.(2) Before removing LCM from its packing case or incorporating it into a set, be sure the module andyour body have the same electric potential.(3) When soldering the terminal of LCM, make certain the AC power source for the soldering irondoes not leak.(4) When using an electric screwdriver to attach LCM, the screwdriver should be of groundpotentiality to minimize as much as possible any transmission of electromagnetic waves produced sparks coming from the commutator of the motor.(5) As far as possible, make the electric potential of your work clothes and that of the workbenches tothe ground potential.(6) To reduce the generation of electro-static discharge, be careful that the air in the work is not toodried. A relative humidity of 50%-60% is recommended.11.4 PRECAUTIONS FOR OPERATION(1) Viewing angle varies with the change of liquid crystal driving voltage (Vo). Adjust Vo to showthe best contrast.(2) Driving the LCD in the voltage above the limit will shorten its lifetime.(3) Response time is greatly delayed at temperature below the operating temperature range. However,this does not mean the LCD will be out of the order. It will recover when it returns to the specified temperature range.(4) If the display area is pushed hard during operation, the display will become abnormal. However, itwill return to normal if it is turned off and then on.(5) Condensation on terminals can cause an electrochemical reaction disrupting the terminal circuit.Therefore, this product must be used and stored within the specified condition of 23±5°C, 45±20%RH.(6) When turning the power on, input each signal after the positive/negative voltage becomes stable.11.5 SAFETY(1) It is recommended to crush damaged or unnecessary LCDs into pieces and wash them off withsolvents such as acetone and ethanol, which should later be burned.(2) If any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash offthoroughly with soap and water.12. REVISION HISTORYrecord Date Version Reviseversion 06-06-131.0 OriginalSAMPLE APPROVED REPORT。
埃特罗斯电气样本

ፆ 1,0 ੇ 0,9
(Ω) 0,8
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0,0
1
3
5
7
9
ժၿናۅ
图d:阻抗-谐波次数曲线图
11
13
15
17
19
ၿհْຕ
06
非调谐补偿滤波应用场合
如果是工业配电系统,一般5次谐波为频率最低且幅值最大的谐波,对于这 样的配电网,选择非调谐补偿滤波回路的调谐频率次数应低于5次谐波。 右侧图示曲线为电抗率7%的非调谐补偿滤波回路阻抗特性,回路的调谐频 率为189Hz。接入非调谐补偿滤波回路后,可以避免5次及以上谐波的放 大,同时,非调谐补偿滤波回路在调谐频率以上的阻抗低于系统阻抗,回 路可以吸收部分调谐频率以上的谐波,起到滤波作用。
无功补偿和滤波概述
配电网无功补偿与谐波概述
无功功率补偿
在电力系统中,大部分负载在消耗有功功率的同时,也需要大量的无功 功率,这些无功功率并没有被负载真正消耗,而是以电场和磁场的形式 进行交换,因此无功功率将造成: ◎ 占用供电设备容量 ◎ 增加变压器和输电线路损耗 ◎ 降低设备供电电压 ◎ 产生无功罚款,增加用电成本
UA
I UB
ࠃྪۉ
ࠃۉజ၍ UA
Վუഗ r
I
ࢁజ၍
UB
ۉඹഗ
RN XN RT XT
XC
图a:电网简化图及其单线图
串联谐振:图c的曲线图分析了串联起来的变压器和电容器(图b所示)的电路阻抗和谐波次数关系,曲线图显示了发生在11次谐波频率附近的
串联谐振。 当频率接近串联谐振频率时,供电母线上一个相对较低的谐波电压将会引起很大的谐波电流。 较大的谐波电流将会使负载母线上出现较高的谐波电压,使正弦电压发生畸变。
MSK162中文资料

ISO-9001 CERTIFIED BY DSCC
162/163 ULTRA HIGH VOLTAGE
OPERATIONAL AMPLIFIER
M.S.KENNEDY CORP.
4707 Dey Road Liverpool, N.Y. 13088
(315) 701-6751
○
RTH Thermal Resistance (DC)
Junction to Case ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 10°C/W
ELECTRICAL SPECIFICATIONS
Parameter
STATIC Supply Voltage Range 2 4 9
Quiescent Current
Test Conditions 1
Group A MSK162B/163B
MSK162/163
Subgroup Min. Typ. Max. Min. Typ. Max.
Units
VIN=0V
-
±50 ±150 ±175 ±50 ±150 ±175 V
1
- ±1.4 ±2.0 - ±1.4 ±2.0 mA
162 (see mechanical specifications). If the application calls for a gain of less than 10 V/V, refer to the MSK 158/159 data sheet.
EQUIVALENT SCHEMATIC
Input Voltage (Differential)
±16V
○
○
○
○
○
○
机型参数(Modelparameters)

机型参数(Model parameters)华硕 a632n: sd卡 com5 4800 mini sd卡乐游300 com2 48001. 富威: com2 / 48002. 索菱、索莱特: com3 / 96003. 凯振: com2 / 96004. 路特仕、图音: com2 / 96005. 卡仕达、科骏达: com1 / 9600或com6 / 48006. 欧华: com2 / 9600.7.视宏: com2 / 48008.超音: com2 / 96009.凌盛: com2 / 480010.佳艺田: com2 / 960011.路畅: com1 / 960012.飞韵: com7 / and13.科维: com2 / 480014.飞歌: com6 / 480015.道道全: com2 / 480016.新星光: com1 / 9600卡仕达 320 * 240 cf _ storage com6 4800480 * 234 resources _ storage com6 4800科骏达 320 * 240 cf _ storage com6 4800480 * 234 resources _ storage com6 4800华阳 (派迅) 416 * 234 存储卡 com2 9600天派sdmmc com1 4800欧华 320 * 240 storag * * d com2 4800科维 320 * 240 storag * * d com2 4800城际通天籁专用 420 * 240 cf _ storage com6 4800 一线通新奥迪a6l480 * 234 storag * * d com2 4800 黑匣子导航盒 320 * 240 storag * * d com2 4800路特仕 800 * 480 storag * * d com1 9600佳亿田 320 * 240 storag * * d com2 4800途美a831、途美a837: com1, 4800途美a851、途美a852、途美a856: com2, 4800 任e行z10、z20 + 、乐驾4300: com2, 4800 依路行4302、4305、4306: com2, 4800路驰com1 4800 hd500 com7 and奥可视t400、t410、t420等: com1, 4800神达c系列、乐游系列: com2, 57600神行者898、858、818: com2, 4800欧华com2 4800新科com1 and纽曼com2 4800万和为: 1 4800欣威俊为: 2 4800长虹410为: 1 4800e路航lh800为: 2 4800lh900为: 7 57600e道航为: 1 4800奥可视为: 1 4800.1、任e行z10; z18; z13; in 20 (4.3) wince4.2 / 5.0 卡名dmmc; 端口com2; 速率4800任e行u10 (4.3) wince5.0 卡名dmmc; 端口com1; 速率4800 ~ ~2, 430A Howell(4.3) winCE4.2 card torag**d port; COM2; rate of 4800In 3, Newman S600A+ (3.5) winCE4.2 card DMMC port; COM1; rate of 48004, Sauk S620; s808bt (4.3) DMMC card port; COM1; rate of 9600~~!5, China spaceFY 500 port 1 rate 4800 card SDMMCThe other type of port 2 rate 4800 SDMMC or Storag**d cardAll models of VanwardPort 1 rate 4800 card SDMMC6, Aladdin 4303A (4.3) DMMC card port; COM2; rate of 4800~~!7, "lejar" SDMMC; COM2 port; the rate of 4800.8, 3.5, 4.3 inch Austria visible -SDMMC; COM1 port; the rate of 48009, LiveView s305 (3.5)Card DMMC; COM1 port; the rate of 480010, 7 inch Ohua DVD+GPS card torag**d; COM2 port; rate of 480011, free 436X (4.3)Card torag**d; port COM2; rate of 4800~~12, a line of 4.3 SDMMC port 1 rate 960013, the new 400S4 DISK 138400 inch CE4.2 SDMMCShinco GM-410C:WinCE4,2, 4.3 inch, SDMMC DISK, com138400The new 48104.8 inch CE4.2 SDMMC DISK com13840014, Pierre Cardin 3.5 WIN CE42 SDMMC COM1 4800-960015, navigation dog 3.5 inch SDMMC COM1 960016, founder of tumei Yihe A852 (4.3) DMMC card port; COM2; rate of 4800In 17, Newman S600A+ (3.5) DMMC card port; COM1; rate of 4800~~!18, travel 200,3.5 inch, torage card Card; COM2 port; the rate of 5760019, LiveView A35 SDMMC com7 4800LiveView S898 (4.3) torag**d card; port: COM2; rate: 4800LiveView A43--4.3 card DMMC port; COM1; rate of 4800LiveView A45 card DMMC 4800 port COM1 rate;20, LH800 card DMMC; COM2 port; the rate of 480021, E Airlines V830 (4.3), SDMMC, COM1, port480022, the constant MV720 (3.5)Card DMMC; port COM1; rate of 4800~~!23, Mio MIO P350 torage card Card; COM2 port; the rate of 4800MIO P565 card torage Card port; COM2; rate of 57600MIO C320VW 4.3 inch card torage Card port; COM2; rate of 57600MIO C310 CE4.2 torage Card card; COM2 port; rate of 4800MIO model C230 3.5 CE5.0 card torage Card port COM2 4800The 24 day, SN-6808 COM1 4800 SDMMC rate card25, a K401 (3.5 inch) card: 4800 MMC_Storage port 6 rate26, the extension card name: SDMMC port COM1 rate: 960027, Malata PG3512 3.5 inch SDMMC COM7 4800Malata PG3522 3.5 inch wince4.2 card name: mmc_Storage com5 960028, 615 SDMMC COM1 38400* QODDE- 000 Tat WINCE5.029, 4.3 inch Austria visible T420W card DMMC port; COM1; rate of 480030, CarNavi Wince4.2 card: SD_Card port: com2 rate: 960040, free X436 (4.3) torag**d card port; COM2; rate of 4800In 41, Newman S999 (4.3) DMMC card port; COM2; rate of 480042, AI Suo AN610 4.3 inch SDMMC COM1 card port rate 480043, Nokia330: torage card Card; COM2 port; the rate of 480044, routon Storage Card 1480045, E SDMMC, COM24800 700N road route.The 46 Olympic Games, visual T460, 4.3 inch, SDMMC/1/9600 47, G230 card Storage Kami, Card COM6 480048, tanker WINCE5.0 3.5 SDMMC COM1 4800 copycat machine49, followed by RYE4306 (4.3) torage Card card port; COM2; rate of 480050, E Airlines V890 (4.3), SDMMC, com1480051, the wizard of God CPND-4302S (4.3) D Card card port; COM1; rate of 3840052, NV308 (3.5) WIN CE42 SDMMC COM1 9600By 628 COM1 480053, JINGWAH 4308/43184301/4311 (4.3 inches) card name: SDMMC port: com7; rate: 3840054, CA207D com:7 4800 SDMMC ce4.2 land navigation55, Magellan Maestro 4250, 4.3, wince 5, SDMMC Card, COM2 port; 56, E LH800 CE4.2/5.0 SDMMC COM2 4800 Luhang57, nasoo (4.3) winCE4.2 card torag**d port; COM2; rate of 480058, ETO GS300 3.5 inch COM1 960059, cityonmap J510 port com:7 baud rate: 14400X50 COM8Dopod 818 com5 memory cardDopod 828 com5 memory cardP50 com5/ com6 need to install Bluetooth patchA632 com5 /Mini SD card SD cardYou can modify the settings in the portX51v COM8 SD cardCU928 com6 storage card to modify the registry, you can add the output COM7HP4150 com6Dopod com6/com7 storage card 838 automatic distribution system COM port not to manually create a new port.Dopod P800 COM4 4800Lenovo 960 com6 memory cardA700/701 COM4 storage card GPS Mio frequency should be set to 57600MiTAC 168 com2 storage cardMiTAC 350 com2 storage card558 com5 SD DISK/CF DISK MioMiTAC A701 COM4 storage card 57600Dopod 696 COM5 memory cardNeed to install Bluetooth patchHp6515 /MiniSD 240*240 com2/com7 SD cardhp2110 COM5 CF卡/ SD卡hp2200 COM8 SD卡et980 COM6存储卡需安装蓝牙补丁长天存储卡S60 COM1700存储卡多普达COM4 COM8700多普达COM4存储卡COM8可能要安装蓝牙补丁惠普5xxx COM8惠普63xx COM7HP iPAQ hx2410:COM8,SD卡戴尔X3 COM7戴尔X3我COM7戴尔X30 COM7戴尔X30我COM7戴尔X50 COM7 SD卡戴尔x50i COM7戴尔x50v COM7戴尔x51v开机死机COM7 SD卡hp2210 / 2250 COM8Atom Exec的记忆卡SD卡COM7 x51v开机死机上电脑600英文PPC2003 SE版本,存储卡名称:SD mmcard宏碁N35 COM8xv6700 COM4存储卡原子执行内存卡端口为COM7 4800;横屏参数:4(无需要安装GPS 门):大显928辆(cu928)存储卡如果用gpsgate要修改注册表,才能添加输出COM7696存储卡多普达com同上,还需要在设置里的蓝牙设置里把传出COM5勾上700辆多普达存储卡818存储卡多普达com还需要在设置里的蓝牙设置里把传出COM5勾上多普达828 / 830 / 838辆/ 7存储卡的COM端口不是系统自动分配,要手动新建端口6或7多普达O2原子辆/ 8内存卡COM端口不是系统自动分配,要手动新建端口多普达P800 COM4存储卡/儲存卡必须开gpsgate使用神达A700 COM2存储卡神达A701 COM4存储卡hp6515 COM2 / 7只卡/MINISD卡240 * 240hp6828 com6-8存储卡的COM端口不是系统自动分配,要手动新建端口0除外P50 com /辆存储卡需安装蓝牙补丁一体机:神达COM2存储卡169350神达COM2存储卡长天存储卡S60 COM1华硕a632n COM5 SD卡/MINISD卡端口可以在设置里修改pda: the com7 x3dellx50 com7 sd / cf 卡卡用城际通需要开gate使用dellx51v com8 sd / cf 卡卡同上hp4150 com6神达168 com2 storage cardhp2110 com5 cf card and sd card 用城际通需要开gate使用hp2200 com8 sd card 同上hp2490 com5 / 8 sd card 同上et980 com6 存储卡需安装蓝牙补丁联想960 com6 存储卡奥可视一体机: com1 波特率4800 卡名: sdmmc百仕通一体机: com1 波特率4800 卡名: sdmmcsp230 com5 卡名: 存储卡xv6700 com4 storage card。
Modicon M221 TM221C16R 产品数据手册说明书

TM221C16R.i s c l ai m e r : T h i s d o c u m e n t a t i o n i s n o t i n t e n d e d a s a s u b s t i t u t e f o r a n d i s n o t t o b e u s e d f o r d e t e r m i n i n g s u i t a b i l i t y o r r e l i a b i l i t y o f t h e s e p r o d u c t s f o r s p e c i f i c u s e r a p p l i c a t i o n sProduct datasheetCharacteristicsTM221C16Rcontroller M221 16 IO relayMainRange of productModicon M221Product or component type Logic controller [Us] rated supply voltage 100...240 V ACDiscrete input number 9 discrete input conforming to IEC 61131-2 Type 1Analogue input number 2 at input range: 0...10 V Discrete output type Relay normally open Discrete output number 7 relay Discrete output voltage 5...125 V DC 5...250 V AC Discrete output current2 AComplementaryDiscrete I/O number16Number of I/O expansion module <= 4 for transistor output <= 4 for relay output Supply voltage limits 85...264 V Network frequency 50/60 Hz Inrush current<= 40 APower consumption in VA <= 46 VA at 100...240 V with max number of I/O expansion module <= 31 VA at 100...240 V without I/O expansion module Power supply output current 0.325 A at 5 V for expansion bus 0.12 A at 24 V for expansion bus Discrete input logic Sink or source (positive/negative)Discrete input voltage 24 V Discrete input voltage type DC Analogue input resolution 10 bits LSB value 10 mVConversion time1 ms per channel + 1 controller cycle time for analog input Permitted overload on inputs+/- 30 V DC for analog input with 5 min maximum +/- 13 V DC for analog input permanentVoltage state1 guaranteed>= 15 V for inputCurrent state 1 guaranteed>= 2.6 mA for fast input>= 4.2 mA for discrete inputVoltage state 0 guaranteed<= 5 V for inputCurrent state 0 guaranteed<= 1.3 mA for discrete input<= 0.6 mA for fast inputDiscrete input current7 mA for discrete input5 mA for fast inputInput impedance 4.9 kOhm for fast input3.4 kOhm for discrete input100 kOhm for analog inputResponse time10 ms turn-on operation for output35 µs turn-off operation for input; I2...I5 terminal10 ms turn-off operation for output5 µs turn-on operation for fast input; I0, I1, I6, I7 terminal35 µs turn-on operation for input; other terminals terminal5 µs turn-off operation for fast input; I0, I1, I6, I7 terminal100 µs turn-off operation for input; other terminals terminal Configurable filtering time0 ms for input12 ms for input3 ms for inputOutput voltage limits125 V DC277 V ACCurrent per output common 6 A at COM 1 termnal7 A at COM 0 termnalAbsolute accuracy error+/- 1 % of full scale for analog inputElectrical durability Inductive AC-15, (cos phi = 0.35) 240 V / 120 VA : 100000 cyclesResistive DC-12, 24 V / 48 W : 100000 cyclesResistive AC-12, 120 V / 240 VA : 100000 cyclesInductive AC-15, (cos phi = 0.35) 240 V / 36 VA : 300000 cyclesResistive AC-12, 120 V / 80 VA : 300000 cyclesInductive (L/R = 7 ms) DC-13, 24 V / 24 W : 100000 cyclesResistive DC-12, 24 V / 16 W : 300000 cyclesInductive (L/R = 7 ms) DC-13, 24 V / 7.2 W : 300000 cyclesInductive AC-14, (cos phi = 0.7) 240 V / 240 VA : 100000 cyclesInductive AC-15, (cos phi = 0.35) 120 V / 60 VA : 100000 cyclesInductive AC-14, (cos phi = 0.7) 240 V / 72 VA : 300000 cyclesInductive AC-15, (cos phi = 0.35) 120 V / 18 VA : 300000 cyclesResistive AC-12, 240 V / 480 VA : 100000 cyclesInductive AC-14, (cos phi = 0.7) 120 V / 120 VA : 100000 cyclesResistive AC-12, 240 V / 160 VA : 300000 cyclesInductive AC-14, (cos phi = 0.7) 120 V / 36 VA : 300000 cycles Switching frequency20 switching operations/minute with maximum load Mechanical durability>= 20000000 cycles for relay outputMinimum load 1 mA at 5 V DC for relay outputProtection type Without protection at 5 AReset time 1 sMemory capacity256 kB for user application and data RAM with 10000 instructions256 kB for internal variables RAMData backed up256 kB built-in flash memory for backup of application and data Data storage equipment 2 GB SD card optionalBattery type BR2032 lithium non-rechargeable, battery life: 4 yrBackup time 1 year at 25 °C by interruption of power supplyExecution time for 1 KInstruction0.3 ms for event and periodic taskExecution time per instruction0.2 µs BooleanExct time for event task60 µs response timeMaximum size of object areas512 %M memory bits512 %KW constant words255 %TM timers255 %C counters8000 %MW memory wordsRealtime clock WithClock drift<= 30 s/month at 25 °CRegulation loop Adjustable PID regulator up to 14 simultaneous loopsCounting input number 4 fast input (HSC mode) (counting frequency: 100 kHz), counting capacity: 32 bitsControl signal type Frequency meterSingle phaseDual phase (pulse/direction)Dual phase (quadrature)Integrated connection type USB port with connector mini B USB 2.0Non isolated serial link "serial 1" with connector RJ45 and interface RS485Non isolated serial link "serial 2" with connector RJ45 and interface RS232/RS485Supply Serial serial link supply at 5 V 200 mATransmission rate 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m - communication protocol: RS4851.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m - communication protocol: RS232480 Mbit/s - communication protocol: USBCommunication port protocol USB port : USB protocol - SoMachine-NetworkNon isolated serial link : Modbus protocol master/slave - RTU/ASCII or SoMachine-Network Local signalling 1 LED green for SD card access (SD)1 LED red for BAT1 LED green for SL11 LED green for SL21 LED per channel green for I/O state1 LED red for module error (ERR)1 LED green for PWR1 LED green for RUNElectrical connection Mini B USB 2.0 connector for a programming terminalTerminal block, 3 terminal(s) for connecting the 24 V DC power supplyConnector, 4 terminal(s) for analogue inputsRemovable screw terminal block for inputsRemovable screw terminal block for outputsCable length<= 10 m shielded cable for fast input<= 30 m unshielded cable for output<= 30 m unshielded cable for digital input<= 1 m unshielded cable for analog inputInsulation2300 V AC between output and internal logicNon-insulated between analogue inputs500 V AC between input and internal logicNon-insulated between analogue input and internal logic1500 V AC between supply and ground500 V AC between sensor power supply and ground500 V AC between input and ground1500 V AC between output and ground2300 V AC between supply and internal logic500 V AC between sensor power supply and internal logic500 V AC between Ethernet terminal and internal logic2300 V AC between supply and sensor power supplyMarking CESensor power supply DC at 250 mA supplied by the controllerMounting support Top hat type TH35-15 rail conforming to IEC 60715Top hat type TH35-7.5 rail conforming to IEC 60715Plate or panel with fixing kitHeight90 mmDepth70 mmWidth95 mmProduct weight0.346 kgEnvironmentStandards EN/IEC 61010-2-201EN/IEC 61131-2EN/IEC 60664-1Product certifications RCMIACS E10DNV-GLcULusCSALRABSEACEnvironmental characteristic Ordinary and hazardous locationResistance to electrostatic discharge 4 kV on contact conforming to EN/IEC 61000-4-28 kV in air conforming to EN/IEC 61000-4-2Resistance to electromagnetic fields10 V/m ( 80 MHz...1 GHz) conforming to EN/IEC 61000-4-33 V/m ( 1.4 GHz...2 GHz) conforming to EN/IEC 61000-4-31 V/m ( 2...2.7 GHz) conforming to EN/IEC 61000-4-3Resistance to magnetic fields 30 A/m at 50...60 Hz conforming to EN/IEC 61000-4-8Resistance to fast transients2 kV for power lines conforming to EN/IEC 61000-4-42 kV for relay output conforming to EN/IEC 61000-4-41 kV for Ethernet line conforming to EN/IEC 61000-4-41 kV for serial link conforming to EN/IEC 61000-4-41 kV for I/O conforming to EN/IEC 61000-4-4Surge withstand2 kV for power lines (AC) in common mode conforming to EN/IEC 61000-4-52 kV for relay output in common mode conforming to EN/IEC 61000-4-51 kV for I/O in common mode conforming to EN/IEC 61000-4-51 kV for shielded cable in common mode conforming to EN/IEC 61000-4-50.5 kV for power lines (DC) in differential mode conforming to EN/IEC 61000-4-51 kV for power lines (AC) in differential mode conforming to EN/IEC 61000-4-51 kV for relay output in differential mode conforming to EN/IEC 61000-4-50.5 kV for power lines (DC) in common mode conforming to EN/IEC 61000-4-5Resistance to conducted disturbances,induced by radio frequency fields10 Vrms (0.15...80 MHz) conforming to EN/IEC 61000-4-63 Vrms (0.1...80 MHz) conforming to Marine specification (LR, ABS, DNV, GL)10 Vrms (spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz)) conforming to Marine specification (LR, ABS, DNV, GL)Electromagnetic emissionConducted emissions conforming to EN/IEC 55011 power lines (AC), 0.15...0.5 MHz : 79 dBμV/m QP/66 dBμV/m AVConducted emissions conforming to EN/IEC 55011 power lines (AC), 0.5...300 MHz : 73 dBμV/m QP/60 dBμV/m AVConducted emissions conforming to EN/IEC 55011 power lines, 10...150 kHz : 120...69 dBµV/m QP Conducted emissions conforming to EN/IEC 55011 power lines, 150 kHz...1.5 MHz : 79...63 dBμV/m QPConducted emissions conforming to EN/IEC 55011 power lines, 1.5...30 MHz : 63 dBμV/m QP Radiated emissions conforming to EN/IEC 55011 class A 10 m, 30...230 MHz : 40 dBμV/m QP Radiated emissions conforming to EN/IEC 55011 class A 10 m, 200 MHz...1 GHz : 47 dBμV/m QP Immunity to microbreaks10 msAmbient air temperature for operation -10...55 °C for horizontal installation -10...35 °C for vertical installation Ambient air temperature for storage -25...70 °CRelative humidity 10...95 % without condensation in operation 10...95 % without condensation in storage IP degree of protection IP20 with protective cover in place Pollution degree <= 2Operating altitude 0...2000 m Storage altitude 0...3000 mVibration resistance3.5 mm (vibration frequency: 5...8.4 Hz) on symmetrical rail 1 gn (vibration frequency: 8.4...150 Hz) on symmetrical rail 3.5 mm (vibration frequency:5...8.4 Hz) on panel mounting 1 gn (vibration frequency: 8.4...150 Hz) on panel mounting Shock resistance98 m/s² (test wave duration:11 ms)Offer SustainabilitySustainable offer status Green Premium productRoHS (date code: YYWW)Compliant - since 1415 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity REAChReference not containing SVHC above the threshold Reference not containing SVHC above the threshold Product environmental profileAvailableProduct environmental Product end of life instructionsAvailableEnd of life manualProduct datasheetTM221C16R Dimensions DrawingsDimensionsProduct datasheetTM221C16R Mounting and ClearanceMounting on a RailProduct datasheetMounting and ClearanceTM221C16RDirect Mounting on a Panel Surface(1)Install a mounting stripMounting Hole LayoutProduct datasheetTM221C16R Mounting and ClearanceMountingCorrect Mounting PositionAcceptable Mounting PositionIncorrect Mounting PositionProduct datasheetTM221C16R Mounting and ClearanceClearanceDigital InputsWiring Diagram (Positive Logic)(*)Type T fuseWiring Diagram (Negative Logic)(*)Type T fuseConnection of the Fast InputsI0, I1, I6, I7Relay OutputsNegative Logic (Sink)(*)Type T fuse(1)The COM1 and COM2 terminals are not connected internally.(2)To improve the life time of the contacts, and to protect from potential inductive load damage, you must connect a free wheeling diode in parallel to each in B Sink wiring (negative logic)Positive Logic (Source)(*)Type T fuse(1)The COM1 and COM2 terminals are not connected internally.(2)To improve the life time of the contacts, and to protect from potential inductive load damage, you must connect a free wheeling diode in parallel to each in A Source wiring (positive logic)Analog InputsUSB Mini-B ConnectionSL1 ConnectionSL1N.C.: not connected* : 5 Vdc delivered by the controller. Do not connect.SL2 ConnectionN.C.: not connectedPerformance CurvesDerating CurvesEmbedded Digital Inputs (No Cartridge)X :Ambient temperatureY :Input simultaneous ON ratioEmbedded Digital Inputs (with Cartridge)X :Ambient temperatureY :Input simultaneous ON ratioTM221C16R.。
HS162-4液晶显示使用说明

用单片机控制字符型液晶显示模块液晶显示器以其微功耗、体积小、显示内容丰富、超薄轻巧的诸多优点,在袖珍式仪表和低功耗应用系统中得到越来越广泛的应用。
本文介绍字符型液晶模块HS162-4与单片机89C51的接口与编程方法。
HS162-4液晶模块是一种用5x7点阵图形来显示字符的液晶显示器,根据显示的容量可以分为1行16个字、2行16个字等。
下面以常用的2行16个字的显示方式介绍HS162-4液晶模块的使用方法。
HS162-4采用标准的16脚接口,其中VSS为地电源,VDD接5V正电源,V0为液晶显示器对比度调整端,接正电源时对比度最弱,接地电源时对比度最高,对比度过高时会产生“阴影”,使用时可以通过一个10K的电位器调整对比度。
RS为寄存器选择,高电平时选择数据寄存器、低电平时选择指令寄存器。
RW为读写信号线,高电平时进行读操作,低电平时进行写操作。
当RS和RW共同为低电平时可以写入指令或者显示地址,当RS为低电平RW为高电平时可以读忙信号,当RS为高电平RW 为低电平时可以写入数据。
E端为使能端,当E端由高电平跳变成低电平时,液晶模块执行命令。
LEDA和LEDK为背光电源,LEDA接5V正电源,LEDK接GND。
D0~D7为8位双向数据线。
HS162-4液晶模块内部的字符发生存储器(CGROM)已经存储了128个不同的点阵字符图形,如表1所示,这些字符有:阿拉伯数字、英文字母的大小写和常用的符号等,每一个字符都有一个固定的代码,比如大写的英文字母“A”的代码是01000001B(41H),显示时模块把地址41H 中的点阵字符图形显示出来,我们就能看到字母“A”它的读写操作、屏幕和光标的操作都是通过指令编程来实现的。
(说明:1为高电平、0为低电平)指令1:清显示,指令码01H,光标复位到地址00H位置指令2:光标复位,光标返回到地址00H指令3:光标和显示模式设置I/D:光标移动方向,高电平右移,低电平左移S: 屏幕上所有文字是否左移或者右移。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
ACCEPTANCE
SPECIFICATIONS
MODEL
NO . :
162C 0(R EFLEC TIV E TY PES)
FOR MESSRS :
CUSTOMER'S APPROVAL
: _____________________________
DATE BY
: _____________________________
EU-002A 1.2 APPLICATION NOTES FOR CONTROLLER / DRIVER : PLEASE REFER TO : CUSTOMER ACCEPTANCE STANDARD SPECIFICATIONS :
EU- KS0066 1.3 THIS INDIVIDUAL SPECIFICATIONS IS PRIOR TO GENERAL SPECIFICATIONS .
162C0(REFLECTIVE TYPES)
2
TABLE
OF
CONTENTS
NO. ITEM PAGE ===============================================================
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. GENERAL SPECIFICATIONS
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
4 . 9 m /s 2 (0.5G) 2 9 . 4 m / s2 (3G) NOT ACCEPTABLE
1 9 . 6 m /s2 (2G) 4 9 0 . 0 m /s 2 (50G) NOT ACCEPTABLE
XYZ DIRECTIONS
NOTE ( 2 ) : Ta AT -20°C (-30°C FOR EW) : 48HR MAX . 70°C ( 80°C FOR EW) : 168HR MAX . NOTE ( 3 ) : BACKGROUND COLOR CHANGES SLIGHTLY DEPENDING ON AMBIENT TEMPERATURE THIS PHENOMENON IS REVERSIBLE .
OF
REVISED PAGE NO. 1~3
SUMMARY
THE ENTIRE PAGES REVISED
元器件交易网
EMERGING
DISPLAY
MODEL NO.
VERSION
TECHNOLOGIES CORPORATION NUMBERING SYSTEM
162C0(REFLECTIVE TYPES)
元器件交易网
EMERGING
1.
DISPLAY
MODEL NO .
VERSION
PAGE
TECHNOLOGIES CORPORATION
162C0(REFLECTIVE TYPES)
2
1
GENERAL SPECIFICATIONS 1.1 GENERAL SPECIFICATIONS PLEASE REFER TO : CUSTOMER ACCEPTANCE STANDARD SPECIFICATIONS :
PARAMETER H LEVEL INPUT VOLTAGE L LEVEL INPUT VOLTAGE H LEVEL OUTPUT VOLTAGE L LEVEL OUTPUT VOLTAGE POWER SUPPLY CURRENT (LOGIC) ED RECOMMENDED LCD DRIVING VOLTAGE EW CLOCK OSCILLATION FREQUENCY
3 . 2 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS .
I T E M AMBIENT TEMPERATURE HUMIDITY VIBRATION SHOCK CORROSIVE GAS ED EW OPERATING MIN . MAX . 0 °C 5 0 °C - 2 0 °C 7 0 °C 9 0 % RH STORAGE MIN . MAX . - 2 0 °C 7 0 °C - 3 0 °C 8 0 °C 9 0 % RH REMARK NOTE ( 2 ) , ( 3 ) WITHOUT CONDENSATION
TN + Gray STN + Yellow-Green STN + Gray STN + Blue
* : AVAILABLE ONLY FOR TN TYPE
元器件交易网
EMERGING
DISPLAY
MODEL NO .
VERSION
TECHNOLOGIES CORPORATION
元器件交易网
EMERGING
RECORDS
DATE NOV.15,1999
DISPLAY
REVISION
MODEL NO .
VERSION
TECHNOLOGIES CORPORATION
162C0(REFLECTIVE TYPES)
DOC . FIRST ISSUE
2
DEC.05,1997
元器件交易网
EMERGING
4.
DISPLAY
MODEL NO .
VERSION
PAGE
TECHNOLOGIES CORPORATION
162C0(REFLECTIVE TYPES)
2
3
ELECTRICAL CHARACTERISTICS
Ta = 25°C CONDITION -IOH = 0 . 2 mA IOL = 1 . 2 mA VDD = 5 . 0 V Ta = 0 °C Ta = 25 °C Ta = 50 °C Ta = - 20 °C Ta = 25 °C Ta = 70 °C Ta = 25 °C VDD = 5.0 ±0.25 V TYP . MAX . UNIT 1.0 4.2 3.8 3.4 4.4 4.4 4.4 270 0.6 0.4 3.0 V V V V mA V V V V V V KHZ
SYMBOL VIH VIL VOH VOL IDD VDD − VO ∅ = 25°,θ= ** DUTY= 1/16 VDD − VO ∅ = 10°,θ= 0° DUTY= 1/16 FOSC
MIN . 2.2 2.4
5.
OPTICAL CHARACTERISTICS .
----------------------------------------------------------------------------------------------------------------------------------------------------------
SYMBOL VDD − VSS VDD − VO VI MIN . 0 0 VSS MAX . 7.0 13 . 0 VDD 100 UNIT V V V V NOTE ( 1 ) REMARK
PARAMETER POWER SUPPLY FOR LOGIC POWER SUPPLY FOR LCD DRIVE INPUT VOLTAGE STATIC ELECTRICITY
2
Polarizer
Mode Backlight Code R
value
Reflective
Module
type : D : TN Character Modules W : Wide Temp. Modules
E W 16 2 C0 G R *
Viewing LCD LCD type + color Code Value T Y G B direction NIL. : 6 o'clock U : 12 o'clock
-------------------- 16 CH * 2 LINES
-------------------------------- 85.0W * 36.0H * 10.0D (max.) mm ----------------------------- 63.5W * 15.8H mm --------------------------- 5 * 7 DOTS + CURSOR --------------------------- 2.96W * 5.56H mm --------------------------- 3.55W * 5.94H mm
元器件交易网
EXAMINED BY : FILE NO .
CAS-10054
EMERGING DISPLAY
APPROVED BY: TECHNOLOGIES CORPORATION
ISSUE :
NOV.15,1999 7
TOTAL PAGE : VERSION :
2
CUSTOMER
NOTE ( 1 ) : TEST METHOD AND CONDITIONS : AFTER CHARGING UP 200 PF CAPACITOR BY STATED VOLTAGE , THE CAPACITOR IS CONNECTED WITH INTERFACE PINS OF THE MODULE .
2.
MECHANICAL SPECIFICATIONS