1 Ch 4 Power Point
TENMA 72-8000 Series DC Power Supply Instruction M
72-8000 Series DC Power Supply Instruction ManualIntroductionThank you for purchasing our product.In order to ensure correct installation, operation and optimum performance of this product please read this manual in detail and keep for future reference.This instrument is produced under strict quality control. All parts go through screening and ageing, and a series of performance testing, environmental testing and safety testing. In order to guarantee safe use, and the best working performance, working environment guidelines must be followed.Contents1. Summary (3)2. Specifications (3)3. Applications (6)4. Description of panel (6)5. Applications (7)1.Summary72-8000 is a series of general DC power supplies suitable for laboratory use.Both CH1 and CH2 may work in CV or CC mode, and these two modes convert automatically according to the load. CH1 and CH2 have auto tracking function. In this condition, the output of CH2 tracks the output of CH1. This function is usually used when adjustable symmetrical and double polarity power is required. Both CH1 and CH2 display the output voltage or current with a 3-digit-LED meter.CH3 is a 5V fixed output. Its maximum output current is 2A, and it is usually used in TTL circuits etc.CH1, CH2 and CH3 all have overload protection.2.SpecificationsOutput Voltage and Current:Model CH1, CH2VoltageCH3VoltageCH1, CH2CurrentCH3Current72-8690 0V – 32V / 0A – 3A / 72-8695 0V – 32V 5V 0A – 3A 2A 72-8700 0V – 32V / 0A – 5A /CH1 and CH2Load Regulation: CV: ≤1X10-4 +2mV; CC≤20mA Ripple and Noise: CV: ≤1mVrms; CC: ≤1mVrms Adjustable Resolution: CV: ≤20mV (typical)CC: ≤50mA (typical)Interactive Regulation: CV: 5X10-5 +1mVCC: <0.5mATracking Error: 5X10-3 +2mVCH3Output Voltage: 5VOutput Current: 0-2ARipple and Noise: ≤3mVrmsAmbient Temperature Range:Operating: 0°C - 40°CStoring: +5°C - +45°CPower Source: AC220V±10%，50Hz±4%Dimensions (H x W x D): 152mm x 197mm x 305mmWeight: Approx. 9.5kgMTBF: ≥2000hAccessoriesCheck the meter for any damage or exposed metal parts. Packaging should include the following accessory items - if any differences or damage, please contact the nearby sales offices:∙ Power cord 1 pcs∙ Instruction manual 1 pcs1.Description of Panel1) Voltage meter2) Current meter3) VOLTS: Adjusts the output voltage at CV mode4) CURRENT: Adjusts the output current at CC mode5) MODE: Controls two main channels. Works in FREEmode or TRACK mode.6) MEASURE: Selects the digital meter’s display, the outputvoltage or the output current7) Ground of instrument8) Output terminal of CH19) Output terminal of CH210) Output terminal of CH311) POWER: Push in to turn on the power.2.ApplicationsThe left area of panel corresponds to CH1 and the right area of panel corresponds to CH2. When the left MEASURE is pushed out, the CV lamp switches on, and the left digital meter displays the output voltage of CH1. When this button is pushed in, the CC lamp switches on, and the left digital meter displays the output current of CH1. CH2 is same as CH1.When the MODE button is pushed out, each CH1 and CH2 works independently. When this button is pushed in, CH2 tracks to CH1.The output of CH1 and CH2 are suspended. You can set the negative level of output by connecting the reference point to the “-”terminal.Each CH1 and CH2 can output from:0V to 32V and from 0V to 3A (adjustable)0V to 64V and from 0A to 3A current (adjustable in series)0V to 32V and from 0A to 6A (adjustable in parallel)The “-”terminal of III channel has been connected to the ground.A protective grounding connection is essential for safe operation. This is helpful to reduce the ripper and also the 50Hz noise.**END**Operating Manual content is subject to change without notice!Tenma405 S. Pioneer Blvd,Springboro, Ohio 45066-3001Phone: 1-888-655-5409Fax: 1-800-765-6960。
powerup4知识点汇总
powerup4知识点汇总PowerUp4是一个关于电子设计自动化（EDA）的课程，以下是该课程的一些重要知识点汇总：1.集成电路芯片：集成电路芯片是将多个电子元件集成在一块衬底上，实现一定的电路功能。
芯片的设计和制造需要经过多个步骤，包括电路设计、版图绘制、制造、测试等。
2.硬件描述语言：硬件描述语言是一种用于描述数字电路和系统的语言，它能够描述电路的结构、行为和功能。
常见的硬件描述语言包括Verilog和VHDL。
3.可编程逻辑器件：可编程逻辑器件是一种数字集成电路，可以通过编程来配置其内部逻辑，实现所需的电路功能。
常见的可编程逻辑器件包括FPGA （现场可编程门阵列）和CPLD（复杂可编程逻辑器件）。
4.数字电路设计：数字电路设计是指利用数字电路的基本元件和逻辑门来设计数字系统。
数字电路设计包括组合逻辑电路设计和时序逻辑电路设计。
5.模拟电路设计：模拟电路设计是指利用模拟电路的基本元件和放大器来设计模拟系统。
模拟电路设计需要考虑到信号的放大、滤波、调制和解调等方面。
6.PCB设计：PCB（印刷电路板）是电子系统中常用的互连器件，用于将电子元件连接在一起。
PCB设计是指将电子元件布局在电路板上，并设计出满足电气性能要求的互连线路。
7.电磁兼容性：电磁兼容性是指电子设备在电磁环境中正常工作的能力。
电磁兼容性需要考虑信号的传输、噪声的抑制、辐射的减小等方面。
8.系统级设计：系统级设计是指将多个模块或子系统组合在一起，形成一个完整的系统。
系统级设计需要考虑系统的总体架构、模块之间的接口和通信、系统的性能和可靠性等方面。
以上是PowerUp4课程中的一些重要知识点，它们是电子设计自动化领域的核心内容，对于学习和掌握电子设计自动化技术非常重要。
Power-Point的使用技巧全
2021/3/7
CHENLI
32
17.幻灯片上做标记
1、在放映时，单击鼠标右键，在打开的快捷菜单中选择 “指针选项”命令，在打开的子菜单“圆珠笔”/“毡尖笔”
/“荧光笔”。 2、如果你对绘图笔颜色不满意，还可在右击幻灯片时弹出 的快捷菜单中选择“指针选项”命令，再选择“墨迹颜 色”，你就可以挑一种喜欢的颜色啦。
2021/3/7
CHENLI
31
4、如果要将此时间应用到当前幻灯片上，则点“应用”按 钮，如果应用到所有幻灯片上，就单击“全部应用”按钮。 5、对要设置时间的每张幻灯片重复上述步骤。 说明：如果希望在单击鼠标和经过预定时间后都能换页，请 同时选中“单击鼠标换页”和“每隔”复选框。至于哪个起 作用，则以较早发生者为准。
CHENLI
9
2021/3/7
CHENLI
10
假如想在幻灯片的任何位置上添加日期、时间， 可按下列步骤进行：
在幻灯片上，定位占位符或文本框内的插入点。 点击“插入→日期和时间”，系统弹出“日期和时 间”对话框，用户可以选择自己喜欢的时间格式。 选完以后单击“确定”就可以了。
2021/3/7
CHENLI
十月, 2500, 8%
十一月, 3600, 12%
十二月, 5200, 17%
第一季度 第二季度 第三季度 十月 十一月 十二月
2021/3/7
CHENLI
47
90 80 70 60 50 40 30 20 10
0 第一季度 第二季度 第三季度 第四季度
东部 西部 北部
2021/3/7
CHENLI
CHENLI
20
8.放映时进到下一张幻灯片
进到下一张幻灯片: N、Enter、PageDown、 右箭头、下箭头、空格键（或单击鼠标）
power point角标
power point角标（实用版）目录1.PowerPoint 简介2.PowerPoint 角标的含义3.PowerPoint 角标的使用场景4.PowerPoint 角标的优点和局限性5.结论正文1.PowerPoint 简介PowerPoint 是由微软公司出品的办公软件系列重要组件之一。
用户不仅在投影仪或者计算机上进行演示，也可以将演示文稿打印出来，制作成胶片，以便应用到更广泛的领域中。
一套完整的演示文稿文件一般包含：片头动画、PPT 封面、前言、目录、过渡页、图表页、图片页、文字页、封底、片尾动画等。
所采用的素材有文字、图片、图表、动画、声音、影片等。
2.PowerPoint 角标的含义PowerPoint 角标，也被称为 PPT 角标，是在 PowerPoint 演示文稿中使用的一种特殊符号，用于标记幻灯片中的特定内容或位置。
角标可以是数字、字母或符号，它们位于幻灯片的四个角上，用于快速定位和引用幻灯片上的内容。
3.PowerPoint 角标的使用场景PowerPoint 角标广泛应用于各种演示文稿中，特别是那些包含大量数据或信息的演示文稿。
以下是一些使用 PowerPoint 角标的常见场景：- 标注幻灯片上的重要信息或数据，便于观众理解和记忆。
- 引用幻灯片上的特定内容，如图表、图片或文字。
- 创建链接，将幻灯片上的内容与其他演示文稿或文档链接起来。
- 标记幻灯片上的关键点，帮助演讲者控制演示文稿的节奏和内容。
4.PowerPoint 角标的优点和局限性PowerPoint 角标的优点包括：- 方便快速地定位幻灯片上的内容，提高演讲者的效率和观众的体验。
- 可以在演示文稿中添加更多信息，而不会显得杂乱无章。
- 可以方便地更改幻灯片的顺序，而不会影响演示文稿的整体结构。
然而，PowerPoint 角标也存在一些局限性：- 如果使用不当，可能会使幻灯片显得杂乱无章，影响观众的体验。
MICAPS4帮助文档
目录
0 快速入门手册.........................................................................................................................6 0.1 安装.............................................................................................................................. 6 0.2 快速配置......................................................................................................................6 0.2.1 数据源配置.......................................................................................................6 0.2.2 综合图配置.......................................................................................................7 0.2.3 单站雷达默认配置（工具栏）...................................................................... 9 0.2.4 模式剖面默认配置（工具栏）...................................................................... 9 0.2.5 累积降水默认配置（工具栏）.................................................................... 10 0.2.6 表格数据默认配置（工具栏）.....................................................................11 0.2.7 模式探空默认配置.........................................................................................11 0.2.8 基础地图信息配置.........................................................................................12 0.2.9 交互层“另存为”保存................................................................................ 13 0.2.10 系统启动配置与出图配置.......................................................................... 14 0.2.11 传真图配置.................................................................................................15
RM10C混合记录仪规格说明书
RM10C HYBRIDRECORDER OUTLINERM10C is 100mm calibrated hybrid recorder in a 144x144DIN front panel and short depth of 150mm case housing.The recorder has versatility of universal input and scale inwide ranges and flexibility of user-reconfigurable uniquefunctions. RM10C offers 1, 2 continuous pen and 6 dotpoint models.FEA TURESShort case depth size of 150mmIP65: Dust-proof, Water-proofWide LED with 18mm heights displayAllows user-selected consumablesRS-232C communication interface instandard specificationsUL, C-UL, CE approvedWeights only 1.5kg (Multipoint type)Optional portable housing case availableSPECIFICA TIONSz Input signalDC voltage:± 10, 0 ~ 20, 0 ~ 50, ± 200 mV DC, ± 1, 0 ~ 5,± 10 V DCThermocouple:B, R, S, K, E, J, T, C, Au-Fe, N, PR40-20, PLII, U, L Resistance temperature detector: Pt100, JPt100DC current: 4 ~ 20mA DC(with external shunt resistor: 250Ω<Charged: HMSU3081A11>) z PerformanceAccuracy: See RANGE TABLEDead band: Within 0.2% (Pen Model only)Input impedance:10MΩ min. in mV, TC input;200kΩ min. in mV, TC input (with burnout protection);1MΩ min. in Voltage input;250Ω (External shunt resister) in mA inputAllowable signal source resistance:10kΩ max. in mV, TC input;100Ω max. in mV, TC input (with burnout protection);1kΩ max. in Voltage input;10Ω max. per line in RTD inputNormal mode reduction ratio: 60dB min. (50/60 ± 0.1Hz) Common mode reduction ratio: 140dB min. (50/60 ± 0.1Hz) Isolation resistance: 0.5kV DC 20MΩ min. between theeach terminal and grounding terminal Dielectric strength:1.5kV AC for 1 minute between power terminal andgrounding terminal;0.5kV AC for 1 minute between input terminal andgrounding terminal;0.2kV AC for 1 minute between the input terminalsInter channel maximum noise voltage:200 V AC at 50/60 HzVibration resistance: 10 ~ 60Hz 1m/s2 max.Shock resistance: 2m/s2 max.Clock precision: ± 50ppm max.Chart feed accuracy: ± 0.1% max.z StructureMounting: Panel mountAllowable backward inclination: Within 30°Material (Color):Case, Polycarbonate (Black), Glass 10% UL94-V2;Door, Polycarbonate, UL94-V2 (Clear)Dust-proof, Water-proof(Complies with the IEC529-IP65) z Power Supply V oltagePower voltage (rated): 100 ~ 240V AC Power voltage: 85 ~ 264V ACFrequency (rated): 50/60HzFrequency: 45 ~ 65Hzz Normal Operating ConditionsAmbient temperature: 0 ~ 50°C Ambient humidity: 20 ~ 80%RH Supply voltage: 85 ~ 264V ACz Alarm (Relay output is optional)Alarm types: 2 types(H,L),4 levels/channelAlarm output: 250 V AC, 3 A max. (resistance load) 125 V DC, 0.5 A max.(resistance load) 30 V DC, 3 A max.(resistance load) Hysteresis width: 0.5 ± 0.2 % Setting accuracy: ± 0.5 % Outputs:Pen Model, 3 point (Built-in option, normally open); Multipoint Model, 6 point (Built-in option, normally open)z Safety Standard and EMI Standard Electrical safety:IEC1010-1,UL3101-1 installation category II and pollution degree 2. UL3101-1Emissions: EN55011 Group1 Class A Immunity: EN50082-2z Communication Interface RS-232C (Standard): 1200, 2400, 4800, 9600 RS-485 (Option): 1200, 2400, 4800, 9600z DI functionFunction Description Chart Feed Start/Stop Close: Starts Open: Stops Change Chart Speed Close: Chart speed 1 Open: Chart speed 2 Comment Print Prints programmed characters(Multipoint model is up to 16characters per line. Pen model is up to 12 characters per line.)Manual Print Close: Start to print Date and Time Print Close: Start to printUp to 3 functions among above can be selected in one recorder.z OptionChart sensor: Detects paper-out to output an alarm.INDIVIDUAL SPECIFICA TIONSBlock Item Pen Model Multi point Model Measuring Point 1, 2 6 Input Sampling 125ms 10s/6chInput Unit Display Interval 2.5s 2.5sRecording Form Disposable felt penPrinting Form Wire dot (one color ink ribbon) Wire dot with 6-color ink ribbonRecording Width 100 mmStep Response 1.0s max. to 95% of step-wise input - Dot Print Interval - 10s/ch (Note 2) Chart Paper Length : 16m, Width : 114 mm Folding width : 40 mm (Note3) Chart Speed 5, 10, 15, 20, 25, 30, 40, 50, 60, 75, 80, 90, 100,120, 150, 160, 180, 200, 240, 300, 360, 375, 450, 600, 720, 750, 900, 1200, 1500, 1800, 2400, 3000, 3600, 4500, 4800, 5400, 6000, 7200, 9000, 10800, 12000 mm/h0, 1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 40, 50, 60,75, 80, 90, 100,120, 150, 160, 180, 200, 240, 300, 360, 375, 450, 600, 720, 750, 900, 1200, 150 mm/h (Analog recording is notdone during the chart speed setting 0 mm/h.)Recording Color (Note1) 1 pen (Red), 2 pen (Green)No.1 (Purple), No.2 (Red), No.3 (Green),No.4 (Blue), No.5 (Brown), No.6 (Black) Record & Printer Printing Color Purple Purple, Red, Green, Blue, Brown, Black Weight 1 pen: 2.0kg max., 2 pen: 2.5kg max, 1.5kg max. Power Consumption 30V A max. (at 100V AC) 25V A max. (at 100V AC)(Note 1) User-changeable arbitrary colors with set-up configuration. (Note 2) User-selective interval from 10, 20, 30 and 60 seconds. (Note 3) Clean Chart Paper: Length 12 mMEASUREMENT RANGEThe junction compensation accuracy is not calculated into digital readout accuracy and recording accuracy . The junction compensation accuracy is based on operating conditions: T emperature, 23 ± 2°C; Humidity , 55 ± 10%RH; Power source 85 ~ 264V AC; Frequency , 50/60Hz ± 1%; Warm-up time 30 minutes min.; No effect of vibration and shock of over recorder’s resistibility .Junction compensation accuracy: B, R, S, Au-Fe, PR40-20 ± 1°CK, E, J, T , C, N, PLII, U, L ± 0.5°CMeasurementDigital AnalogType RangeMeasurementrangeAccuracy Max.ResolutionAccuracy- 10.00 ~ 10.00mV ±(0.2% of rdg + 3digits) 10µV0.00 ~ 20.00mV ±(0.2% of rdg + 3digits) 10µV 0.00 ~ 50.00mV ±(0.2% of rdg + 2digits) 10µV - 200.0 ~ 200.0mV ±(0.2% of rdg + 3digits) 100µV - 1.000 ~ 1.000V ±(0.1% of rdg + 3digits) 1mV0.000 ~ 5.000V±(0.2% of rdg + 2digits)1mV - 10.00 ~ 10.00V ±(0.3% of rdg + 3digits) 10mV DC Voltage/ Current Input4 ~ 20mA ±(0.2% of rdg + 2digits) 0.01mADigital accuracy ±(0.3% of span)B 0.0 ~ 1820.0°C ±(0.15% of rdg + 1°C) (Note 1) R1 0.0 ~ 1760.0°C ±(0.15% of rdg + 1°C) (Note 2) R2 0.0 ~ 1200.0°C ±(0.15% of rdg + 0.8°C) (Note 2) S 0.0 ~ 1760.0°C ±(0.15% of rdg + 1°C) (Note 2) K1 - 200.0 ~ 1370.0°C ±(0.15% of rdg + 0.7°C) (Note 3) K2 - 200.0 ~ 600.0°C ±(0.15% of rdg + 0.4°C) (Note 3) K3 - 200.0 ~ 300.0°C ±(0.15% of rdg + 0.3°C) (Note 3) E1 - 200.0 ~ 800.0°C ±(0.15% of rdg + 0.5°C) E2 - 200.0 ~ 300.0°C ±(0.15% of rdg + 0.4°C) E3 - 200.0 ~ 150.0°C ±(0.15% of rdg + 0.3°C)J1 - 200.0~ 1100.0°C ±(0.15% of rdg + 0.5°C) (Note 4) J2 - 200.0 ~ 400.0°C ±(0.15% of rdg + 0.4°C) (Note 4)J3 - 200.0 ~ 200.0°C ±(0.15% of rdg + 0.3°C) (Note 4) T1 - 200.0 ~ 400.0°C ±(0.15% of rdg + 0.5°C) (Note 4) T2 - 200.0 ~ 200.0°C ±(0.15% of rdg + 0.4°C) (Note 4) C 0.0 ~ 2320.0°C ±(0.15% of rdg + 1°C) 0.1°CAu-Fe 1 .0 ~ 300.0K ±(0.15% of rdg + 1K) (Note 5) 0.1KN 0.0 ~ 1300.0°C ±(0.15% of rdg + 0.7°C) PR40-20 0.0 ~ 1880.0°C ±(0.15% of rdg + 1°C (Note 6) PLII 0.0 ~ 1390.0°C ±(0.15% of rdg + 0.7°C) U - 200.0 ~ 400.0°C ±(0.15% of rdg + 0.5°C) (Note 7) Thermo- couple L - 200.0 ~ 900.0°C ±(0.15% of rdg + 0.5°C) (Note 7) 0.1°CDigital accuracy ±(0.3% of span)Pt100-1 - 200.0 ~ 650.0°C ±(0.15% of rdg + 0.3°C)Pt100-2 - 200.0 ~ 200.0°C ±(0.15% of rdg + 0.2°C)JPt100-1 - 200.0 ~ 630.0°C ±(0.15% of rdg + 0.3°C) ResistanceT emperatureDetectorJPt100-2 - 200.0 ~ 200.0°C ±(0.15% of rdg + 0.2°C)0.1°CDigital accuracy ±(0.3% of span)Note 1: 400 ~ 600°C: ± 2°CA range under a span of 400°C: Accuracy is out of guaranteeNote 2: 0 ~ 100°C: ± 3.7°C 100 ~ 300°C, ± 1.5°C Note 3: - 200 ~ -100°C: ± (0.15% of rdg + 1°C) Note 4: - 200 ~ -100°C: ± (0.15% of rdg + 0.7°C) Note 5: 1 ~ 20 K: ±2.4 KNote 6: 0 ~ 300°C: ± 37.6°C 300 ~ 800°C, ±18.8°C Note 7: - 200 ~ -100°C: ± (0.15% of rdg + 0.7°C)STANDARD FUNCTIONSItem Description Analog recording Pen Models: Continuous pen tracingMulti point Model: Dot printing with 6-color ribbon cartridgeDigital display Indicates channel no., processvariable, date, chart speed, alarm setpoint in front display.Logging print Prints date, time, scale, chart speed,each channel’s process variable andengineering unit at a programmedinterval.List print Prints chart speed, type of input, range,engineering unit, alarm set point,comment print status, Printingdescription, logging print ON/OFFconfiguration, ZONE recordingconfiguration, point focus configurationEngineering list print Prints configuration of channel/tag print switch, alarm print, logging print ON/OFF, reference time, interval, alarm hysteresis, burnout protection, scaling print ON/OFF, DI function (option)Affix print (Multipoint Model) Prints Channel number besides analog recording line.Manual print Prints measured data by the front keyoperation. Analog recording stopsduring manual printing.Skip (Multipoint model) Abandon dot print of inputs as required.Programming Programs chart speed, alarm setpoint, logging print interval, skip, dateand time.Memory Backup Back-up for clock by built-in lithiumbattery for 10 years, 5 years inunpowered state.A non-volatile memory storesconfiguration and calibration data. Alarm Sets 2 types (H, L) of alarms perchannel. Sets a total of 4 levels. Chart Speed Selects Chart speed from 41 types. Clock Indication Indicates Y ear, Month, Day, Hour andMinute. Sets the year in A.D, andadjusts leap year automatically.Self Diagnostics Occurring some type of the defect toindicate “ERROR”.Scaling Indicates and record the input of aunification signal etc. is changed intothe engineering scales. CONFIGURABLE FUNCTIONSFunction Description Burnout protection Sets pointer at over 100% perinputs when input becomesopen for T/C or ±50mV max.input.T ag Number T ag number up to 5 charactersfor pen models/7 characters formultipoint model per channelcan be programmed, and printsat logging print.T emperatureCompensationInside/outside of referencejunction compensation (DE/DHconnection) can be specified.Copy Function Channel configuration data canbe copied to another channel.Input offset Input offset per channel can beprogrammed.ZONE Recording Recording on the chart track inspecified range per channel.Point focus recording Recording by point focus to1-crease line per channel.Decade Recording •IndicatingRecords and indicates up to 5decades. 2 figures of effectivenumber to indicate and print.Alarm print Prints time, channel number,setting number and type ofalarm in alarming.Alarm recovery print Prints recovery time, recoverychannel number, settingnumber and type of alarm atrecovery.Record start/end print Prints time and comment(“Start” or “End”) when recordbeginning or end.Square root Square root available.Integration Sum, balance, average amongchannels can be integrated.Damping(Pen Model)Digital filtering for measureddata (PV) in unsteady process.Filter constant range ability:1.0000 to 0.0001Formula is: k = 0.64/T Ik = Filter constantT I= 99.5% dampingAlarm Hysteresis Width Alarm hysteresis width can beprogrammed at 0% FS or 0.5%FS.DIMENSIONSPanel Cutout (mm)TERMINAL ARRANGEMENTMultipoint ModelPen ModelLN 1A 2 C 2 A 1 C 3 A 4 C 4A 3 C 5 A 6 C 6 A 5 C 4 +B4- B 4 A 5+B 5 - B 5 A 6+B 6- B 6 A 1 + B 1 - B1 A2 + B 2 - B 2 A 3+B 3- B3 ASG R D T D +– D I C O M D I 3 D I2 D I 1 LN1A 2 C 2 A 1 C 3 A 3 C 1+B 1-B 1A 2+B 2-B 2ASG R D T D + –D I C O M D I 3 D I2 D I 1T h e r m o c o u p l e i n p u t+-R T D i n p u tm A i n p u t m V , V i n p u t + + +A B bS h unt resistor R2 5 0Ω <Charged HMSU3081A11>+ - + - --Power GroundLN AC I N 7max.(Panel thickness)25150(Unit = mm)1 4 41 4 43 . 52 . 5CH, NO.DA T ARUN M E NU P RINT F E E D E NT200 min.200 m i n .138 138 –0+1 –0+1MODEL CODE NUMBER(Note 1) Combination of RS-232C and RS-485 unavailable.(Note 2) Nos. of relay outputs:6 point recorder 6 relays; Pen recorder 3 relaysCAUTIONDo not install this device before consulting instruction manualSpecifications are subject to change without notice.For further information, a quotation or a demonstration please contact to:Head Office / Factory Saitama, JAP ANSales Offices T okyo, Osaka, Nagoya, Kyushu, T ohokuURL http://www.ohkura.co.jp/e-mail (in English) ******************.jpPrinted in Japan: Aug. 2006。
Power Point 2007综合操作题
1、打开KSP201 PPT演示文稿，完成下列动画制作，效果如录像KSP201．EXE所示。
（1）将幻灯片版式切换为空白版式；（2）插入素材中的“图片1”，设置高为10厘米，宽为26厘米，动作路径为向下、之前、中速，通过文本框添加文字，字体为黑体、18号，其中“EXPO 2010”加粗，“SHANGHAI CHINA”为14号字，退出动画设置为淡出、之前、慢速；（3）插入素材中的“图片2”，设置高为3厘米，宽为15厘米，退出动画设置为线形、之后、中速；（4）插入素材中的“图片3”，设置高为15厘米，宽为20厘米，进入动画设置为线形、之前、中速；（5）插入素材中的“图片4”，设置高为6厘米，宽为6厘米，图片效果为映像，紧密映像接触，进入动画设置为升起、之后、中速；（6）插入素材中的“图片5”，进入动画设置为擦除、之后、自左侧、快速；（7）通过文本框添加相应文字，字体为黑体、18号，时间部分设置为红色，进入动画设置为展开、之后、快速；（8）新增幻灯片，插入素材中的“图片6”、“图片7”，并放置到适当位置，通过文本框添加标题“2010上海世博会主题馆”，字体设置为微软雅黑、30号、加粗。
添加矩形，设置高为0.1厘米，宽为20厘米，填充为渐变中的线性向右，通过文本框添加内容，字体为微软雅黑、18号；（9）新增幻灯片，插入素材中的“图片8”，图片效果为映像，紧密映像接触，进入动画设置为百叶窗、之后、水平、非常快，插入素材中的“图片2”，进入动画设置为飞入、之后、自底部、慢速；（10）调整动画播放顺序，换片方式为向左推进。
2、打开KSP202 PPT演示文稿，完成下列动画制作，效果如录像KSP202．EXE所示。
（1）将幻灯片版式切换为空白版式；（2）插入素材中的“图片1”，插入形状中的“梯形”绘制房顶，形状填充为红色－强调文字颜色2，形状轮廓为红色－强调文字颜色2，深色25%，插入形状中的直线，粗细为6磅，进入动画设置为淡出、非常快；（3）通过文本框添加文字“报刊长廊”，字体设置为宋体、45号、加粗、文字阴影，进入动画设置为飞入、自左侧、非常快；（4）插入素材中的“图片2”、“图片3”，调整大小，进入动画设置为淡出、非常快；插入素材中的“图片4”到“图片9”，调整大小，放置到合适位置，进入动画设置为螺旋飞入、非常快；（5）通过形状中的“矩形”绘制桌子，进入动画设置为淡出、非常快，插入素材中的“图片10”，进入动画设置为淡出、非常快，通过文本框添加文字“摊主有事外出，买报请自取，谢谢！”，字体为隶书、18号，进入动画设置为淡出、非常快，强调动画为忽明忽暗、非常快；（6）插入素材中的“图片11”，进入动画设置为飞入、自顶部、非常快，通过形状中的“椭圆”绘制钱币，填充及轮廓均为黑色，进入动画设置为飞入、自顶部、非常快，将素材中的“图片9”、“图片8”、“图片7”按先后顺序分别退出动画，淡出、非常快；（7）调整动画播放顺序，动画间采用自动播放。
初级听力教案
第一课教案你好一、课型初级听力课二、使用教材《发展汉语初级汉语听力》（第1册）第一课三、教学对象水平：初级阶段教学环境：小模块班级，教学人数为10人年龄：19-22国籍：阿拉伯国家人母语背景：英语、法语等四、教学目标1、通过听力训练，掌握关键词的用法。
“你好”“您贵姓”“我是学生”“你叫什么名字？”2、通过听力训练，掌握正确的语音语调。
掌握声母p t k q c h,韵母ai eiao ou ia ie iao iu ua uo uai uei.五、教学重点和难点声母p t k q c h韵母ai ei ao ou ia ie iao iu ua uo uai uei.六、教学方法讲练法、听说法七、教具Power point课件、音频、黑板。
八、教学步骤1、跟学生打招呼，问好，用肢体动作夸张的表达“你好”。
2、放一段视频，有两个人对话，这是事先找班上同学录的，表演课本上的内容。
这样做是为了给每个同学表现的机会，让他们趁此机会在学习新课之前就能先主动的习得汉语日常表达，加强了他们的学习目的性，同时，其他同学看到这样的视频也会更加认真和努力学习。
3、新课讲解。
A 跟读声母p t k q c h 韵母ai ei ao ou ia ie iao iu ua uo uai uei.B 听音频，选出你听到的声母。
pai /tai pa/ ta can/chan kao /cao qiao/tiao pian/qian chou/kou chui/kuiC 听音频，画出你听到的韵母Bai/bei pei/pen tao/tang cao/cang zhou/zhong chou/chong Jue/jun xun/xue zhan/zhen cang/cong tao/tou dai/douJu/jue/junD听音频，给下面的音标上音调1 Min xue zu xi tong lai2 Ming nian hai lai wan3 guojiaF 仔细听，写出第二声的个数。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Can be bought or sold (or shorted) at any time of the day Holdings are disclosed twice a day Investments do not have to be sold to cover redemptions Share price close to NAV of underlying investments
13
Risk Management and Financial Institutions 4e, Chapter 4, Copyright © John C. Hull 2015
Hedge Fund Performance
Statistics produced by Dow Jones Credit Suisse indicate that hedge funds outperformed the market between 2004 and 2009, but not between 2009 and 2013 (See Table 4.5) Many hedge fund strategies have low betas and therefore cannot be expected to outperform the market when it is doing well. The statistics may bias average hedge fund performance upward because only hedge funds that choose to report their returns are included in the statistics and these tend to be the hedge funds that are doing well.
Hedge funds are not subject to these restrictions
Risk Management and Financial Institutions 4e, Chapter 4, Copyright © John C. Hull 2015
12
Hedge Fund Fees
Investments in mutual funds in the U.S. have grown from $0.5 billion in 1940 to over $15 trillion in 2014 Most common type of fund is an open-end fund This means that the number of shares in the fund goes up as investors buy more shares and down as they redeem shares Net asset value (NAV) of fund is the value of its investments divided by number of shares All purchases and sales of shares are at the 4pm NAV
Risk Management and Financial Institutions 4e, Chapter 4, Copyright © John C. Hull 2015
2
Tax
Tax is paid as though the investor owned the mutual fund investments If the mutual fund realizes capital gains or dividends during a year, the investor has to pay taxes on the amount realized The investor’s basis (i.e., the amount the investor is assumed to have paid for the mutual fund shares) is adjusted to avoid double taxation when the shares are sold
A typical fee structure is 2 plus 20% This means that the fund charges a 2% management fee per year plus an incentive fee equal to 20% of any profit after management fees There may be lock-up periods during which funds cannot be withdrawn Other features: hurdle rates, high-water marks, and clawbacks
Risk Management and Financial Institutions 4e, Chapter 4, Copyright © John C. Hull 2015
14
Number of Consecutive Years of Positive Alpha
Number of Observations
Observations for which the Next Alpha is Positive (%)
1
574
50.4
2
3 4 5 6
312
161 79 41 17
Mutual Funds are restricted because
Shares must be redeemable at any time NAV must be calculated daily Investment policies must be disclosed Use of leverage is limited
Risk Management and Financial Institutions 4e, Chapter 4, Copyright © John C. Hull 2015
7
Advantages of ETFs over Open- and Closed-End Mutual Funds
9
Risk Management and Financial Institutions 4e, Chapter 4, Copyright © John C. Hull 2015
Jensen’s Results on the Persistence of Good Performance (Table 4.3)
Late trading Market timing Front running Directed brokerage
Risk Management and Financial Institutions 4e, Chapter 4, Copyright © John C. Hull 2015
11
Hedge Funds
52.0
53.4 55.8 46.4 35.3
Risk Management and Financial Institutions 4e, Chapter 4, Copyright © John C. Hull 2015
10
Mutual Fund Scandals (pages 77-79)
Risk Management and Financial Institutions 4e, Chapter 4, Copyright © John C. Hull 2015
6
Exchange-Traded Funds (ETFs, page 75-76)
Often designed to track an index Started by an institutional investor that deposits a block of securities and obtains shares in the fund Shares are traded on an exchange Large institutional investors can exchange shares in the fund for the underlying assets, and vice versa This keeps the share price close to the NAV of the fund’s investments
4
Costs (Table 4.2)
Annual fee Front-end load Back-end load Relatively low in US Relatively high in Canada, Denmark, Finland, Italy, Norway, and Spain
8
Risk Management and Financial Institutions 4e, Chapter 4, Copyright © John C. Hull 2015
Performance of Mutual Funds
The classic study is by Jensen in 1969. His results have been confirmed in later studies The average alpha of all funds is slightly negative. Good performance by a mutual fund manager in the past is not a good guide to future performance