LED Patent Info
Philips 基本LED灯泡说明书
Philips EssentialLED Bulb 3000K/6500K 230VPhilips Essential LED Bulb is a sustainable green light bulb to ensure direct replacement of GLS bulbs in indoor application.With latest LED technology, Essential LED Bulb o ers over 83% energy saving and lasts 10 years (if lit 2.7 hours per day across 365 days) to save your total investment cost.From LED chips chosen to the nal assembly, di erent kinds of professional quality control methods are adopted to guarantee the light quality consistency through product lifetime.The product is professionally designed to endure surge and environmental tests to make sure it can be adapted into di erent indoor application situations.Design highlights• Form factor is designed as a direct retrofit into A60 fixtures • Over 85% energy-saving compared with GLS• Long lifetime of 10 years (if lit 2.7 hours per day across 365 days)• Warm white CCT 3000K and cool daylight CCT 6500K available • Environmental friendly, no Mercury or any other hazardous substances • Low Carbon FootprintApplication areasApplication notes• Operating temperature range is between -20 °C and 45 °C ambient• Only to apply in dry or damp locations and most of open fixtures with E27/B22 lamp- holders that offer sufficient space (10 mm free air space)• Not intended for use with emergency light fixtures or exit lights • Not intended for enclosed luminaires The qualified light makes it suitable for general indoor applications such as:• Elite shops• Corridors / Stairways / Washrooms • Lobby / Reception areas • Hotel rooms / Bars• HomeProduct type Voltage Wattage Cap Bulb CCT Lumen Luminous Lifetime CRI EEIshape e cacy label(V) (W) (K) (Lm) (=lm/W) (hours)ESS LEDBulb 4W E27 3000K 230V A60 TR 220-240V 4.0 E27 A60 3000 300 75 10000 80 A+ ESS LEDBulb 4W E27 6500K 230V A60 TR 220-240V 4.0 E27 A60 6500 310 78 10000 80 A+ ESS LEDBulb 6W E27 3000K 230V A60 TR 220-240V 6.0 E27 A60 3000 490 82 10000 80 A+ ESS LEDBulb 6W E27 6500K 230V A60 TR 220-240V 6.0 E27 A60 6500 510 85 10000 80 A+ ESS LEDBulb 8W E27 3000K 230V A60 TR 220-240V 8.0 E27 A60 3000 610 76 10000 80 A+ ESS LEDBulb 8W E27 6500K 230V A60 TR 220-240V 8.0 E27 A60 6500 640 80 10000 80 A+ ESS LEDBulb 4W E27 3000K 230V A60 UAE 220-240V 4.0 E27 A60 3000 300 75 10000 80 4 star ESS LEDBulb 4W E27 6500K 230V A60 UAE 220-240V 4.0 E27 A60 6500 310 78 10000 80 4 star ESS LEDBulb 6W E27 3000K 230V A60 UAE 220-240V 6.0 E27 A60 3000 490 82 10000 80 4 star ESS LEDBulb 6W E27 6500K 230V A60 UAE 220-240V 6.0 E27 A60 6500 510 85 10000 80 4 star ESS LEDBulb 8W E27 3000K 230V A60 UAE 220-240V 8.0 E27 A60 3000 610 76 10000 80 4 star ESS LEDBulb 8W E27 6500K 230V A60 UAE 220-240V 8.0 E27 A60 6500 640 80 10000 80 4 star ESS LEDBulb 4W B22 3000K 230V A60 UAE 220-240V 4.0 B22 A60 3000 300 75 10000 80 4 star ESS LEDBulb 4W B22 6500K 230V A60 UAE 220-240V 4.0 B22 A60 6500 310 78 10000 80 4 star ESS LEDBulb 6W B22 3000K 230V A60 UAE 220-240V 6.0 B22 A60 3000 490 82 10000 80 4 star ESS LEDBulb 6W B22 6500K 230V A60 UAE 220-240V 6.0 B22 A60 6500 510 85 10000 80 4 star ESS LEDBulb 8W B22 3000K 230V A60 UAE 220-240V 8.0 B22 A60 3000 610 76 10000 80 4 star ESS LEDBulb 8W B22 6500K 230V A60 UAE 220-240V 8.0 B22 A60 6500 640 80 10000 80 4 star ESS LEDBulb 4W E27 3000K 230V A60 SA 220-240V 4.0 E27 A60 3000 300 75 10000 80 C ESS LEDBulb 4W E27 6500K 230V A60 SA 220-240V 4.0 E27 A60 6500 310 78 10000 80 C ESS LEDBulb 6W E27 3000K 230V A60 SA 220-240V 6.0 E27 A60 3000 490 82 10000 80 C ESS LEDBulb 6W E27 6500K 230V A60 SA 220-240V 6.0 E27 A60 6500 510 85 10000 80 C ESS LEDBulb 8W E27 3000K 230V A60 SA 220-240V 8.0 E27 A60 3000 610 76 10000 80 C ESS LEDBulb 8W E27 6500K 230V A60 SA 220-240V 8.0 E27 A60 6500 640 80 10000 80 C ESS LEDBulb 4W B22 3000K 230V A60 SA 220-240V 4.0 B22 A60 3000 300 75 10000 80 C ESS LEDBulb 4W B22 6500K 230V A60 SA 220-240V 4.0 B22 A60 6500 310 78 10000 80 C ESS LEDBulb 6W B22 3000K 230V A60 SA 220-240V 6.0 B22 A60 3000 490 82 10000 80 C ESS LEDBulb 6W B22 6500K 230V A60 SA 220-240V 6.0 B22 A60 6500 510 85 10000 80 C ESS LEDBulb 8W B22 3000K 230V A60 SA 220-240V 8.0 B22 A60 3000 610 76 10000 80 C ESS LEDBulb 8W B22 6500K 230V A60 SA 220-240V 8.0 B22 A60 6500 640 80 10000 80 CLEDbulbB22E27Spectral Power DistributionSpectrum Essential LED Bulb 3000KTemperature300/310lm T c Max: 102 o C 490/510lm T c Max: 90 o C610/640lm T c Max: 105 o CTc pointSpectrum Essential LED Bulb 6500KEssential LEDBulb 4W E27/B22 3000K 230V A601 x 300 lmLight output ratio 1.00Service upward 0.81Service downward 0.19CIE ux code7 26 56 19 100UGRcen (4Hx8H, 0.25H )16Essential LEDBulb 4W E27/B22 6500K 230V A601 x 310 lmLight output ratio 1.00Service upward 0.81Service downward 0.19CIE ux code7 26 56 19 100UGRcen (4Hx8H, 0.25H )16Essential LEDBulb 6W E27/B22 3000K 230V A601 x 490 lmLight output ratio 1.00Service upward 0.81Service downward 0.19CIE ux code7 26 56 19 100UGRcen (4Hx8H, 0.25H )17Light output ratio 1.00Service upward 0.81Service downward 0.19CIE ux code7 26 56 19 100UGRcen (4Hx8H, 0.25H )18Essential LEDBulb 6W E27/B22 6500K 230V A601 x 510 lmLight output ratio 1.00Service upward 0.81Service downward 0.19CIE ux code7 26 56 19 100UGRcen (4Hx8H, 0.25H )18Light output ratio 1.00Service upward 0.81Service downward 0.19CIE ux code7 26 56 19 100UGRcen (4Hx8H, 0.25H )18Essential LEDBulb 8W E27/B22 3000K 230V A601 x 610 lmEssential LEDBulb 8W E27/B22 6500K 230V A601 x 640 lmLifetime + SustainabilityFailure Rate Curve of Essential LED bulb 3000K/6500K50%45%40%35%30%25%20%15%10%5%0%500010000T o t a l F a i l u r e R a t eHoursEssential LED Bulb has a lifetime exceeding 10,000 hours de ned as (F50L70), where:F50L70, meaning 50% in total of whole population of lamps either fail without light output or lumen maintenance lower than 70% of initial value.Lifetime estimation based on the application environment condition: at room temperature (25°C), free air burning,baseup burning position, and at rated voltage.© 2016 Philips LightingAll rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.。
NCP5030高功率LED评估板用户手册说明书
NCP5030MTTXGEVB NCP5030 High PowerLighting Evaluation Board User's ManualOverviewThe NCP5030 is a fixed frequency PWM buck −boost converter optimized for constant current applications such as driving high −powered white LED. The buck −boost is implemented in an H −bridge topology and has an adaptive architecture where it operates in one of three modes: boost,buck −boost, or buck depending on the input and load condition. This device has been designed with high −efficiency for use in portable applications and is capable of driving up to 1.2 A pulse current and 900mA continuous current into a high power LED for camera flash,flashlight, torch and similar applications. To protect the device cycle by cycle current limiting and a thermal shutdown circuit have been incorporated as well as outputOVP (Over −V oltage Protection). The high switching frequency allows the use of a low value 4.7 m H inductor and ceramic capacitors. The NCP5030 is in a low profile and efficient thermally enhanced 3 x 4 mm DFN package.NCP5030 High Power Lighting Evaluation BoardThis evaluation board demonstrates the overall NCP5030capabilities and offers very easy current programming. The output current is fully configurable via the usage of 4external resistors and corresponding jumper headers. The NCP5030 lighting evaluation board schematic is depicted in Figure2.Figure 1. NCP5030MTTXGEVB Board PictureEVAL BOARD USER’S MANUALSCHEMATICFigure 2. NCP5030 High Power Lighting Evaluation Board SchematicOperationL101 selection depends on the output current, VLF5014A4R7M1R1 is recommended at output current under 500mA, and RLF7030T4R7M3R4 is recommended when output current is larger than 700mA.The power supply of NCP5030 should be from 2.7V to 5.5V. Maximum input voltage is 7.0V and maximum continuous output current is 900mA.CAUTION:1.Exceeding the maximum input voltage maydamage NCP5030 permanently!2.Too long time duration at over output currentmay decrease LED life time or even damageLED!Table 1. Input Power ConnectorSymbol Descriptions J101−1Positive terminal of external power supplyJ101−2GND of external power supplyJ107−1Positive terminal of 3*AA batteries in serialJ107−2GND of 3*AA batteries in serialTable 2. Output Power ConnectorJ108−1/2VOUT of NCP5030J108−5/6FB of NCP5030Table 3. Jumper SetupSymbol DescriptionsJ102−1/2Peak current set to about 3 A, peak current and setting resistor selection can reference the datasheet of NCP5030J102−2/3Peak current set to about 1.5 A, peak current and setting resistor selection can reference the datasheet of NCP5030J103Short will connect CTRL to PVIN and enable NCP5030J110GND test jumperJ104Must be connected to ensure NCP5030 work properly, can measure inductor current here, such as peak current of inductorJ105Select D101 as load of NCP5030, be careful if J111 or J108 is connectedJ111Select D102 as load of NCP5030, be careful if J105 or J108 is connectedJ109Output current setting, reference to table 5(Output current setting table)Table 4. Test PointsTP101CTRL and enable of NCP5030.TP102FB, feedback, reference voltage is 200 mV.TP103Switch LX1TP104Switch LX2Current Setting SelectionThe output is determined by the resistor or resistors connected between FB pin and GND. R102 to R106 and J109 are used for output current setting according to eq. 1:I out(A)+0.2R(W)(eq. 1)Where R is the total resistance between FB and GND, J109 allows parallel connections of several resistors to select output current.Following is the output current setting table of J109 (1=short connected; 0=left open)Table 5. Output Current Setting TablePIN9−10PIN7−8PIN5−6PIN3−4PIN1−2Output Current (mA) 000011000001020000011300001004000010150000110600001117000110080001101900Efficiency TestFigure 3 and Figure 4 describe efficiency results in different conditions.0.010.020.030.040.050.060.070.080.090.0100.05.505.405.305.205.105.004.904.804.704.604.504.404.304.204.104.003.903.803.703.603.503.403.303.203.103.002.902.802.702.60350 mA 500 mA700 mA900 mAFigure 3. Efficiency vs. Input Voltage, R pca = 82 K W , load = LXHL − PW09,Inductor = VLF5014A4R7M1R1 for I out = 350 mA, 500 mA and 700 mA, RLF7030T4R7M3R4 for I out = 900 mAEfficiency vs. V IN0.010.020.030.040.050.060.070.080.090.0100.05.505.405.305.205.105.004.904.804.704.604.504.404.304.204.104.003.903.803.703.603.503.403.303.203.103.002.902.802.702.60VLF5014A4R7M1R1RLF7030T4R7M3R4Figure 4. Efficiency vs. Input Voltage @ Inductor, I out = 900 mA,R pca = 82 K W , load = LXHL − PW09, V f = 3.9 VEfficiency vs. V INOutput Current RegulationFigure 5 shows the relationship between output current regulation R pca and input voltage. There may be a tradeoff between output current and input current limit.0.0100.0200.0300.0400.0500.0600.0700.0800.0900.01000.05.505.405.305.205.105.004.904.804.704.604.504.404.304.204.104.003.903.803.703.603.503.403.303.203.103.002.902.802.702.60Figure 5. Output Current Regulation vs. Input Voltage @ R pca , I out = 900 mAInductor = RLF7030T4R7M3R4; Load = LXHL − PW09, V f = 3.9 VEfficiency vs. V INR pca = 82 K WR pca = 39 K WPCB LAYOUTFigure 6. Assembly LayerFigure 7. Top Layer RoutingBILL OF MATERIALSTable 6. BILL OF MATERIALS FOR THE NCP5030MTTXGEVB HIGH POWER LIGHTING EVALUATION BOARDD e s i g n a t o rQty Description Value T o l e r a n c eFootprint MFG MFG Part Number S u b s t i t u t i o n A l l o w e d R O H S C o m p l i a n t C1011Ceramic chip capacitor 330 pF 5%0603TDK C1608C0G1H331J Yes Yes C1021Ceramic chip capacitor 22 pF 5%0603TDK C1608C0G1H220J Yes Yes C1031Ceramic chip capacitor 22 m F 20%0805TDK C2012X5R0J226M Yes Yes C1041Ceramic chip capacitor 1 m F 20%0603TDK C1608X5R0J105M Yes Yes C1051Ceramic chip capacitor 10 m F 20%0805TDK C2012X5R0J106M Yes Yes L1011Chip winding magnetic shielded inductor 4.7 m H20%4.5*4.7 mm TDKVLF5014AT-4R7M1R1Yes Yes 6.8*7.3 mmRLF7030T-4R7M3R4R1011Chip resistor 100 K W 5%0603Std.Std.Yes Yes R1021Chip resistor TBD (not mounted)NA 0805/1206Std.NA NA NA R103,R1042Chip resistor 0.51 W 1%,1/4 W 0805/1206Std.Std.Yes Yes R1051Chip resistor 1 W 1%,1/8 W 0805/1206Std.Std.Yes Yes R1061Chip resistor 2.2 W 1%,1/8 W 0805/1206Std.Std.Yes Yes R1071Chip resistor 39 K W 5%0603Std.Std.Yes Yes R1081Chip resistor 82 K W 5%0603Std.Std.Yes Yes TP101-TP1044PCB terminal 1 mm NA NA Standard 1mm Std.Std.Yes Yes U1011Buck −Boost driver for high power flash LED NANAWDFN12,3*4mm NCP5030MTTXGNo Yes ON Semiconductor J1011Header X 2NA NA SL5.08/2/90SL5.08/2/90B Weidmüller Yes Yes J102,J1062Header 3 pin, 0.1 inch spacingNA NA 0.100*3Std.Std.Yes Yes J103,J104,J105,J1114Header 2 pin, 0.1 inch spacingNANA0.100*2Std.Std.Yes YesJ10713*AA Battery holder NA NA 1.84*2.25 mm MPD BH3AA −PC No Yes J1081Header 6NA NA 0.100*6AMP 535676No Yes J1091Header 2*5,0.1 inch spacing NA NA 0.100*2*5Std.Std.Yes Yes J1101GND jumper 400 mil spacing NA NA 0.400spacing D3082−B01Harwin Yes Yes D1011LXCL −PWT1NA NA 2.0*1.6 mm Lumileds LXCL −PWT1No Yes D1021Lambertian LED modulesLUXEON I LUXEON IIINALambertianLumiledsLXHL −PW01LXHL −PW09YesYesTEST PROCEDURE1.Visual inspection the board after solder, thereshould be no short, redundant solder ball.2.Measure the resistance of each pin of NCP5030 toGND, there should be no short to GND (except pin GND) or each other. Measure the forward andbackward resistance of D101/D102. Ensure solder is good.3.Short J104;4.Short J103;5.Short J106 2−3(power supply from J101);6.Configure J102 in 2−3 position;7.Short J105, open J111, J108;8.Configure J109 in 100 mA position (pin1−2shorted);9.Configure power supply output voltage to 3.7 V.10.Power off and connect power supply to J101;11.Power on, check D101 is lighting;12.Power off and Configure J109 in 200 mA position(pin3−4 shorted);13.Power on, check D101 is lighting;14.Power off and Configure J109 in 400 mA position(pin5−6 shorted);15.Power on, check D101 is lighting;16.Power off and Configure J109 in 400 mA position(pin7−8 shorted);17.Power on, check D101 is lighting;18.Power off and configure J102 at 1−2 position;19.Configure J109 in 100 mA position (pin1−2shorted);20.Power on, check D101 is lighting;21.Power off, open J105, short J111 (if D102mounted);22.Power on, check D102 is lighting (if D102mounted);23.Power off, open J105, J111, connect J108 toexternal LED or LED module (if there is);24.Power on, check external LED or LED module islighting (if there is);25.Power off;26.Configure board default and connect jumpersaccordingly•Place board in 300 mA output currentconfiguration:•Place jumpers on J109 1−2(100 mA), 3−4(200 mA), 9−10(0 mA);•Place a jumper on J102 2−3;•Place jumpers on J103/J104;•Place a jumper on J105 and make sure J111 is open;•Place a jumper on J106 2−3;ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATION。
(信息与通信)LED国星光电英文版
LED backlights for LCD screens and monitors.
Hale Waihona Puke High-brightness and low-power LED backlights for various display applications.
Customizable LED backlighting solutions for specific LCD panel sizes and requirements.
Positioning of GuoXing Photoelectricity in the
Industry
Leading
technology
Market share
Future development
GuoXing Photoelectric has a leading position in the field of LED packaging technology, with a strong technological strength and rich experience in product development and production.
LED Products of GuoXing Photoelectricity
• Architectural and decorative LED lighting fixtures.
LED Products of GuoXing Photoelectricity
LED Backlighting Products:
LED Application Fields
General lighting
LEDs are widely used in indoor and outdoor lighting, such as ceiling lights, wall lights, street lights, and landscape lights.
亚克力LED 8N LD24产品信息说明书
PLEXIGLAS® LED 8N LD24 PRODUCT INFORMATIONProduct Profile:PLEXIGLAS® LED 8N LD24 is a highly transparent light guide material based on PLEXIGLAS® 8N.In addition to the typical properties of PLEXIGLAS®, such as• E xcellent weather resistance• U V-stability• G ood flow, high mechanical strengthPLEXIGLAS® LED 8N LD24 is developed for edge lit LED applications. The light scattering properties convert the light guide to a full illuminated panel. Furthermore, the material allows for a competely transparent view through the light guide when it is not illuminated. This opens a new degree of freedom for designers. PLEXIGLAS® LED 8N LD24 is recommended for panels with a distance of 12 cm to 24 cm between two light injecting LED strips.Application:Preferably, for injection molding, but can also be used for special extrusion.Examples:BLU (Back lighting) for LCD-Displays, illuminated freeform panels, ambient lighting, illuminated handle bars and switches. Illuminated outline contours for devices.Processing:PLEXIGLAS® LED 8N LD24 can be processed on injection molding machines with 3-zone general purpose screws for engineering thermoplastics.Physical Form / Packaging:PLEXIGLAS® LED 8N LD24 is supplied as pellets of uniform size, packaged in 25kg polyethylene bags; other packaging on request.Properties:All listed technical data are typical values intended for your guidance. They are given without obligation and do not constitute a materials specification.This information and all further technical advice is based on our present knowledge and experience. However, it implies no liability or other legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular, no warranty, whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We reserve the right to make any changes according to technological progress or further developments. The customer is not released from the obligation to conduct careful inspection and testing of incoming goods. Performance of the product described herein should be verified by testing, which should be carried out only by qualified experts in the sole responsibility of a customer. Reference to trade names used by other companies is neither a recommendation, nor does it imply that similar products could not be used.Röhm is a worldwide manufacturer of PMMA products sold under the PLEXIGLAS® trademark on the European, Asian, African and Australian continents and under the ACRYLITE® trademark in the Americas.® = registered trademarkPLEXIGLAS and PLEXIMID are registered trademarks of Röhm GmbH.Ref. No.: MC232-E3 A1142 Date: 2020-02-20Röhm GmbH • Darmstadt • Germany **************************** Certified to ISO 9001:2015, ISO 14001:2015 and IATF 16949:2016.Röhm GmbH | PLEXIGLAS® | 2.2020 Page 3/3。
LED产业MOCVD设备专利信息分析
（ 华 南 师 范 大 学 光 电 子 材 料 与技 术研 究所 ，广 东 省 微 纳 光 子 功 能 材 料 与 器 件 实 验章 ，广 东 广 州
摘 要 ：通 过 世 界 专 利 索 引 数 据 库 （ Ｄ ＷＰ Ｉ ） 对 ＭＯ Ｃ Ｖ Ｄ设 备 号利 进 行 全 面 检 索 ，然 后 进 行 人 丁 标 引 ，剔 除 不 相 关
专 利 ，经 过 引 证 、权 利 要 求 项 、诉 讼 等 指标 的筛 选 ，对 Ａ Ｉ Ｘ Ｔ Ｒ Ｏ Ｎ 的喷 淋 头 结 构 技 术 和 Ｖ Ｅ Ｃ Ｏ Ｏ公 司 的 ＭＯ Ｃ Ｖ Ｄ托 盘 技 术 々利 进 行 分 析 和 预 警 。存 “ 七 国 两 组织 ” 专 利 数 据 库 与 综 合 专 利 检 索 分 析 系 统 中 ，检 索 巾 围 的 Ｍ Ｏ Ｃ Ｖ Ｄ设 备 申请 专 利 ，将 国 内 中请 和 来 华 中请 专 利 的 关 键 技 术 点 进 行 比 对 分 析 。通 过 核 心 技 术 分 析 和 预 警 、关 键 技 术 点 比对
ｉ ｎ ｄ ｅ ｘ ｉ ｎ ｇ，ｓ ｅ ｌ ｅ ｃ ｔ ｉ ｎ ｇ ｔ ｈ ｅ ｃ ｏ ｕ ｎ ｔ ｏ ｆ ｃ ｉ ｔ ｉ ｎｇ ｐ ａ ｔ ｅ ｎ ｔ ｓ ，ｐ ａ ｔ ｅ ｎ ｔ ｃ ｌ ａ ｉ ｍｓ，ｌ ｉ ｔ ｉ ｇ ａ ｔ ｉ ｏ ｎ ａ ｎ ｄ ｏ ｔ ｈ ｅ ｒ ｉ ｎ ｄ ｉ ｃ ａ ｔ ｏ ｒ ｓ；ｉ ｍｐ ｌ ｅ ｍｅ ｎ ｔ ｉ ｎ ｇ ａ ｎａ ｌ ｙ ｓ ｉ ｓ ａ ｎ ｄ ｅ ａ ｒ ｌ ｙ ｗａ ｒ ｎ ｉ ｎ ｇ ｔ ｏ ｔ ｈ ｅ ｐ ａ ｔ ｅ ｎ ｔ ｏ ｆ ＡＩ ＸＴＲＯＮ’ Ｓ ｔ ｅ ｃ ｈ ｎ ｏ ｌ ｏ ｇ ｙ ｃ ｏ ｎ ｃ ｅ ｒ ｎ ｉ ｎ ｇ ｓ ｐ ｒ ｉ ｎ ｋ ｌ ｅ ｒ ｓ ｔ ｒ ｕ ｃ ｔ ｕ ｒ ｅ ａ ｎ ｄ ＶＥＥＣＯ’ Ｓ ｔ ｅ ｃ ｈ ｎ ｏ ｌ ｏ ｇ ｙ ｃ ｏ ｎ ｃ ｅ ｒ ｎ ｉ ｎ ｇ ＭＯＣＶＤ ｔ ｒ ａ ｙ ． Ｃｈ ｉ ｎ ｅ ｓ ｅ ｐ ａ ｔ ｅ ｎ ｔ ａ ｐ ｐ ｌ ｉ ｃ ａ ｔ ｉ ｏ ｎｓ ｏ ｎ Ｍ ＯＣＶＤ ｅ ｑ ｕ ｉ ｐ ｍｅ ｎ ｔ ａ ｒ ｅ ｃ ｏ ｌ ｌ ｅ ｃ ｔ ｅ ｄ ｗｉ ｔ ｈ ｉ ｎ ‘ ｔ ｈ ｅ ｓ ｅ ｖ ｅ ｎ ｃ ｏ ｕ ｎ ｔ ｒ ｉ ｅ ｓ ａ ｎ ｄ ｔ ｗｏ ｏ ｒ ｇ ａ ｎ ｉ ｚ ａ ｔ ｉ ｏ ｎ ｓ ’ｐ ａ ｔ ｅ ｎ ｔ ｄ ａ ｔ ａ ｂ ａ ｓ ｅ ａ ｎ ｄ ｃ ｏ ｍｐ ｒ ｅ ｈ ｅ ｎ ｓ ｉ ｖ ｅ ｒ ｅ ｔ ｒ ｉ ｅ ｖ ａ ｌ ｓ ｙ ｓ ｔ ｅ ｍ ；ｔ ｈ ｅ ｎ ｃ ｏ ｍｐ ａ ｒ ｅ ｔ ｈ ｅ ｋ ｅ ｙ ｔ ｅ ｃ ｈ ｎ ｉ ｃ ａ ｌ ｐ ｏ ｉ ｎ ｔ ｏ ｆ ｄ ｏ ｍｅ ｓ ｔ ｉ ｃ ａ ｐ ｐ ｌ ｉ ｃ ａ ｔ ｉ ｏ ｎ ｓ ｔ ｏ ｅ ｘ ｔ ｅ ｒ ｎ ａ ｌ ａ ｐ ｐ ｌ ｉ ｃ ａ ｔ ｉ ｏ ｎ ｓ ． Ｔｈ ｒ ｏ ｕｇ ｈ ｅ ａ ｒ ｌ ｙ ｗａ ｒ ｎ ｉ ｎ ｇ ａ ｎ ｄ
美国LED客户邮箱
Acrylic Leaflet Dispenser Acrylic Napkin Holder acrylic phone display Tissue box Zhejiang Hizhen Electronics Technology Co.Ltd
Shinelong Led Lighting Co. Ltd
wholesale Rii Wireless Keyboard: Free shipping Mini Rii Wireless Keyboard 2.4Ghz Rii Mini Keyboard w
Wholesale SYMA S108G 3CH Infrared Mini Radio Controlled Marine Cobra RC Helico COIN PRO Rave Lights Led Glove Sets Glove Lights Wholesale
Craigslist Browser App for Android Zhuhai Ruiyao Lighting Co. Ltd. LED Spot Light 4W MRGU10 quality Led Spot Lamps for sale Ready to Be Wholesale Supply Source for Online Retailers To Be Demand Aggregator f
Message Board_Pcreate LED lights Chinaese Largest Online LED Lighting Storebuy LED bulbsell LED s Bath Toy Series: Wholesale rubber ducks Flash Rubber Duck Promotional Gifts
CertaDrive 线性隔离LED驱动器数据手册说明书
CertaDrive Linear Isolated LED Drivers Single CurrentCertaDrive 65W 1.4A 46.5V 230VSingle current LED drivers for essential lighting applications.CertaDrive LED drivers are designed to fulfill the market need for essential lighting with reliable performance. The CertaDrive LED drivers offer basic specifications with specific current and voltage settings which are easy to use for high volume applications. The CertaDrive range is optimal to operate mid-power LEDs from different manufacturers. Benefits•Low profile LED-drivers enabling ample luminaire design freedom•Easy to use•Design optimized to meet essential lighting needsFeatures•SELV output for simpler approval process and easy design-in•Specific current and voltage•50,000 hours life time•All T5 form factors but various lengths•Fast Time to Market Application•Recessed, surface and suspended luminaires in offices •Waterproof luminairesDecember 2016Electrical input dataSpecification item Value Unit ConditionNominal input voltage220...240V ac performance range Nominal input frequency50...60HzNominal input current0.35A@230V @ full loadInput voltage230V acNominal input power73.4W@230V @ full load Power factor≥ 0.95@ full load. See graph. Total harmonic distortion≤ 20%@ full load. See graph. Efficiency87%@230V @ full loadInput voltage AC202...254V ac Operational rangeInput frequency AC47.5...63Hz Operational range Isolation Input to Output SELVElectrical output dataSpecification item Value Unit Condition Regulation method Constant CurrentOutput voltage32...46.5V dcOutput voltage max.70V Peak voltage at open load Output current 1.4A Full output current setting@230V @ full load Output current tolerance± 8%Output current ripple LF≤ 30%Ripple = peak / average Output power44.8...65W Full outputElectrical data controls inputSpecification item Value Unit ConditionControl methodGalvanic Isolation NoLogistical dataSpecification item ValueProduct name CertaDrive 65W 1.4A 46.5V 230VOrder codeLogistic code 12NC9290 014 17280EAN3Pieces per box24Wiring & ConnectionsSpecification item Value Unit ConditionInput wire cross-section0.5...1.5mm2WAGO744, solid wire16...20AWG WAGO744, solid wireInput wire strip length8...9mmOutput wire cross-section0.5...1.5mm2WAGO744, solid wire16...20AWG WAGO744, solid wireOutput wire strip length8...9mmMaximum cable length600mm Total length of wiring including LED module, one wayDimensions and weightSpecification item Value Unit ConditionLength (A1)280mmWidth (B1)30mmHeight (C1)21mmFixing hole diameter (D1) 4.1mmFixing hole distance (A2)265mmWeight200gramOperational temperatures and humiditySpecification item Value Unit ConditionAmbient temperature-20...+50ºC Higher ambient temperature allowed as long as Tcase-max is notexceeded.Tcase-max75ºC Maximum temperature measured at T case-pointTcase-life65ºC Measured at T case-pointMaximum housing temperature110ºC In case of a failureRelative humidity10...90%Non-condensingStorage temperature and humiditySpecification item Value Unit ConditionAmbient temperature-25...+85ºCRelative humidity 5...95%Non-condensingLifetimeSpecification item Value Unit ConditionDriver lifetime50,000hours Measured temperature at T case-point is T case-life.Maximum failures = 10%Programmable featuresSpecification item Value Remark ConditionSet output current (AOC)No See Design-in guide.Default output current: = 1400 mALED module temperature derating (MTP)NoConstant Lumen Over Lifetime (CLO)NoDC emergency dimming (DCemDIM)NoFeaturesSpecification item Value Remark ConditionOpen load protection YesShort circuit protection Yes Automatic recoveringOver power protection YesHot wiring NoSuitable for fixtures with protection class I per IEC60598Certificates and standardsSpecification item ValueApproval marks CB / CCC / CE / ENEC / RCM / TISIIngress Protection classification20Inrush currentSpecification itemValueUnitConditionInrush current I peak 7.1A Input voltage 230VInrush current T width 52µs Input voltage 230V, measured at 50% I peakDrivers / MCB 16A type B≤ pcsMCBRatingRelative number of LED driversB 10A 63%B 13A 81%B 16A 100% (stated in datasheet)B 20A 125%B 25A 156%C 10A 104%C 13A 135%C 16A 170%C 20A 208%C25A260%Driver touch currentSpecification itemValueUnitConditionTypical touch current< 0.7mA peakAcc. IEC61347-1. LED module contribution not includedSurge immunitySpecification itemValueUnitConditionMains surge immunity (diff. mode)1kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge immunity (comm. mode)2kVAcc. IEC61000-4-5. 12 Ohm 1.2/50us,8/20us28GraphsOperating windowPower factor versus output powerEfficiency versus output powerTHD versus output power©2016 Philips Lighting B.V.All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presentedin this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. Noliability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- orother industrial or intellectual property rights. Data subject to change.Date of release: December 5, 2016/technology。
LED灯安装中英文对照
LED灯拼装中英文对照1、先装字形光源后再灌超级字胶水，节省时间50%;Installing the glygh light source and than filling with the glue of super sign, it can save up to 50% time.2、超级字胶水与注塑字壳边缘完全融合，并能承重100Kg压力不开裂；The glue of Super sign can whollyfuse the edge of injection molding shell, and the seam can bear 100Kg pressure not crack3、首家户外防水注塑字壳设计方案获得国家实用新型专利；The design of first outdoor waterproof injection molding shell has obtained the national utility model patent;4、光源通过UL、CE、FCC、RoHS相关认证，字壳达到国家标准的高低温、抗紫外线老化测试要求;The light sourcehas passed UL, CE, FCC, RoHS certification,the shell has reachedthe requirements that national standards of temperature and UV aging testing.5、佛光现有注塑字壳模具超过300个品牌1000个规格;FOG has existed injection molding shell more than 300 brands and 1000 specifications.6、佛光企业通过国家ISO9001、ISO14001等质量和环境管理体系认证。
FOG Enterprise has passed ISO9001 、 ISO14001 、qualitymanagement system and environment management system certification.。