HMBT4125中文资料
赫斯曼交换机型号说明书
赫思曼（hirschmann、赫斯曼）RS20系列交换机：·可提供4个、8个、9个、16个和24个10/100Mbps端口。
·多种软件版本可供选择：非网管型（U）、网管基础版（B）、网管增强版（E）以及网管专业版（P）。
·光纤端口为多模或单模形式。
·双电源输入和故障信号触点。
·用于备份/恢复配置以及故障设备快速更换的USB端口。
·0℃至+60℃的标志温度范围（另外提供-40℃至+70℃的扩展温度范围和保护涂层）·完全网管型（支持web、SNMP和通过串口连接的CLI）-VLAN、IGMP Snooping(组播过滤）、端口镜像、端口控制、端口安全性、链路报警、广播限制器、数据流量诊断、环冗余等。
如需了解产品具体价格或技术参数，请联系我们。
常用型号：全电口RS20-0400T1T1SDAEHC （4×RJ45,0℃至+60℃标准温度，网管增强型）RS20-0400T1T1SDAPHC （4×RJ45,0℃至+60℃标准温度，网管专业版）RS20-0800T1T1SDAEHC （8×RJ45,0℃至+60℃标准温度，网管增强型）RS20-0800T1T1SDAPHC （8×RJ45,0℃至+60℃标准温度，网管专业版）RS20-1600T1T1SDAEHC （16×RJ45,0℃至+60℃标准温度，网管增强型）RS20-1600T1T1SDAPHC （16×RJ45,0℃至+60℃标准温度，网管专业版）RS20-2400T1T1SDAEHC （24×RJ45,0℃至+60℃标准温度，网管增强型）RS20-2400T1T1SDAPHC （24×RJ45,0℃至+60℃标准温度，网管专业版）多模光纤RS20-0400M2T1SDAEHC （3×RJ45 1×SC,0℃至+60℃标准温度，网管增强型）RS20-0400M2T1SDAPHC （3×RJ45 1×SC,0℃至+60℃标准温度，网管RS20-0400M2M2SDAEHC （2×RJ45 2×SC,0℃至+60℃标准温度，网管增强型）RS20-0400M2M2SDAPHC （2×RJ45 2×SC,0℃至+60℃标准温度，网管专业版）RS20-0800M2M2SDAEHC （6×RJ45 2×SC,0℃至+60℃标准温度，网管增强型）RS20-0800M2M2SDAPHC （6×RJ45 2×SC,0℃至+60℃标准温度，网管专业版）RS20-0800M4M4SDAEHC （6×RJ45 2×ST,0℃至+60℃标准温度，网管增强型）RS20-0800M4M4SDAPHC （6×RJ45 2×ST,0℃至+60℃标准温度，网管专业版）RS20-1600M2T1SDAEHC （15×RJ45 1×SC,0℃至+60℃标准温度，网管增强型）RS20-1600M2T1SDAPHC （15×RJ45 1×SC,0℃至+60℃标准温度，网管专业版）RS20-1600M2M2SDAEHC （14×RJ45 2×SC,0℃至+60℃标准温度，网管增强型）RS20-1600M2M2SDAPHC （14×RJ45 2×SC,0℃至+60℃标准温度，网管专业版）RS20-2400M2M2SDAEHC （22×RJ45 2×SC,0℃至+60℃标准温度，网RS20-2400M2M2SDAPHC （22×RJ45 2×SC,0℃至+60℃标准温度，网管专业版）单模光纤RS20-0400S2T1SDAEHC （3×RJ45 1×SC,0℃至+60℃标准温度，网管增强型）RS20-0400S2T1SDAPHC （3×RJ45 1×SC,0℃至+60℃标准温度，网管专业版）RS20-0400S2S2SDAEHC （2×RJ45 2×SC,0℃至+60℃标准温度，网管增强型）RS20-0400S2S2SDAPHC （2×RJ45 2×SC,0℃至+60℃标准温度，网管专业版）RS20-0800S2S2SDAEHC （6×RJ45 2×SC,0℃至+60℃标准温度，网管增强型）RS20-0800S2S2SDAPHC （6×RJ45 2×SC,0℃至+60℃标准温度，网管专业版）RS20-1600S2S2SDAEHC （14×RJ45 2×SC,0℃至+60℃标准温度，网管增强型）RS20-1600S2S2SDAPHC （14×RJ45 2×SC,0℃至+60℃标准温度，网管专业版）RS20-2400S2S2SDAEHC （22×RJ45 2×SC,0℃至+60℃标准温度，网管增强型）RS20-2400S2S2SDAPHC （22×RJ45 2×SC,0℃至+60℃标准温度，网管专业版）赫思曼（hirschmann、赫斯曼）MS4128-L2P系列交换机：·4个100Mbps插槽形式。
HM2541 HM2451A 高精度智能测试仪 说明书
目 录一、概述..........................................................................................1 二、技术指标....................................................................................1 三、工作原理....................................................................................3 四、结构特征 (3)4.1 前面板.................................................................................3 4.2 后面板.................................................................................3 4.3 机箱 (3)五、操作使用说明 (5)5.1 注意事项.................................................................................5 5.2 键功能.................................................................................5 5.3 仪器的测量状态及功能............................................................5 5.3.1 蜂鸣器的设置.....................................................................6 5.3.2 显示方式的设置.....................................................................6 5.3.3信号方式的设置 (6)5.3.4测量速度的设置 (6)5.3.5统计/计数方式的设置.........................................................7 5.3.6实时打印的设置.....................................................................7 5.3.7仪器的自动保护功能...............................................................7 5.4 仪器的设置状态及功能..........................................8 5.4.1测量方式的设置 (8)5.4.2量程的设定...........................................................................8 5.4.3数据输入的一般方法...............................................................9 5.4.4自动分选功能........................................................................9 5.4.5调零和样校功能........................................................................10 5.4.6统计功能，统计结果的查看与抽样打印件数的输入...........................11 5.4.7 在线测试功能...........................................................................13 5.4.8 I／O 接口功能 (16)六、维护与维修 (17)Un Re gi st er ed1一 概 述HM2541/HM2451A 是为低电阻测试而设计的高精度智能测试仪。
CH412 中文手册说明书
ESD 保护芯片CH412中文手册 版本：1B 1、概述CH412是四路ESD 保护二极管阵列，能够承受IEC 61000-4-2规定的最高±15KV 人体模型、±8KV 接触放电以及±15KV 气隙放电的ESD 脉冲，用于电子产品对外接口中的高速信号和差分信号以及通用信号的ESD 保护。
CH412K 提供4通道低电容二极管保护和TVS 瞬态电压抑制器箝位，适用于高速和中低速信号，可以用于USB 超速、高速和全速以及低速信号保护。
CH412Z 提供4通道TVS 瞬态电压抑制器箝位，适用于中低速信号，可以用于USB 全速和低速信号保护。
CH412K CH412Z2、特点● 支持±15KV 人体模型HBM 。
● 支持±8KV 接触放电。
● 支持±15KV 气隙放电。
● CH412K ：内部4路独立箝位二极管，典型值1pF 的低输入电容，适用于高速和中低速信号。
● CH412Z ：内部4路TVS 箝位保护，典型值20pF 的输入电容，适用于中低速信号。
● 采用SOT 小体积晶体管级贴片无铅封装，兼容RoHS 。
3、封装封装形式 塑体宽度 引脚间距 封装说明 订货型号 SOT363 1.25mm 49mil 0.65mm 26mil 小型6脚贴片 CH412K SOT353 1.25mm 49mil 0.65mm 26mil 小型5脚贴片 CH412Z 注：1、封装体积较小，正面印字仅有代号而不含全部型号，例如CH412Z 代号是12。
2、盘装，每盘整包装数量为3000只，可以零售，但是零售时不会逐个清点数量。
IO4 IO3 IO3 VCC IO44、型号CH412B已经停产，请换用CH412K，多出的两个通道可以悬空或并联（低速时）。
4、引脚CH412K 引脚号CH412Z引脚号引脚名称类型引脚说明2 2 GND 电源公共接地端，必须直接连接到全局地5 无VCC 电源正电源端，必须靠近引脚对GND连接0.1μF电容，用于USB信号保护时通常为3.3V（或者5V），用于其它信号须同被保护芯片的电源电压（2V～5V）1,3,4,6 1,3,4,5 IO1～IO4 信号ESD保护通道，与被保护芯片的信号引脚并联5、应用说明CH412设计用来与被保护芯片内置的ESD保护一起工作。
华硕HP-N2404IH-DE3 4MP 4× IR网络PTZ摄像头说明书
HWP-N2404IH-DE34MP 4× IR Network PTZ Camera⏹Two-inch 4 MP camera with pan, tilt and zoom (4x) ability⏹Efficient H.265+ compression technology to savebandwidth and storage⏹Clear imaging against strong back light due to 120 dB trueWDR technology⏹Great night-time performance with up to 20 m enhancedIR⏹Water and dust resistant (IP66), and vandal proof (IK10)SpecificationCamera ModuleImage Sensor 1/2.8" progressive scan CMOSMin. Illumination Color: 0.005 Lux @(F1.5, AGC ON), B/W: 0.001 Lux @(F1.5, AGC ON), 0 Lux with IRWhite Balance Auto/Manual/ATW (Auto-tracking White Balance)/Indoor/Outdoor/Fluorescent Lamp/Sodium LampGain Auto/ManualShutter Time 50Hz: 1/1 s to 1/30,000 s, 60Hz: 1/1 s to 1/30,000 s Day & Night IR Cut FilterDigital Zoom 16×Privacy Mask 24 programmable privacy masksFocus Mode Auto/Semi-automatic/ManualWDR 120 dB WDRLensFocal Length 2.8 mm to 12 mm, 4× optical zoomZoom Speed Approx. 2 s (optical lens, wide-tele)Working Distance 10 mm to 1500 mm (wide-tele)Aperture Range F1.5 to F2.7Angle of View Horizontal field of view: 100° to 33° (Wide-Tele), Vertical field of view: 53° to 18°(Wide-Tele), Diagonal field of view: 119° to 37.5° (Wide-Tele)Supplement LightIR Distance 20 mSmart IR SupportPTZMovement Range (Pan) 0° to 355°Pan Speed Configurable, from 0.1°/s to 100°/s, Preset speed: 100°/s Movement Range (Tilt) 0° to 90°Tilt Speed Configurable, from 0.1°/s to 100°/s, Preset Speed: 100°/s Proportional Zoom SupportPresets 300Power-off Memory SupportCompression StandardH.264+ SupportH.265+ SupportH.264 Type Baseline Profile/Main Profile/High ProfileVideo Compression Main Stream: H.265+/H.265/H.264+/H.264,Sub-stream: H.265/H.264/MJPEG,Third Stream: H.265/H.264/MJPEGH.265 Type Main ProfileVideo Bitrate 32 Kbps to 16384 KbpsAudio Compression G.711alaw/G.711ulaw/G.722.1/G.726/MP2L2/PCMAudio Bitrate 64 Kbps (G.711)/16 Kbps (G.722.1)/16 Kbps (G.726)/32 Kbps to 160 Kbps(MP2L2) SVC SupportNetworkSecurity Measures User authentication (ID and PW), Host authentication (MAC address); HTTPS encryption; IEEE 802.1x port-based network access control; IP address filteringNetwork Storage Built-in memory card slot, support Micro SD/SDHC/SDXC, up to 256 GB; NAS (NPS, SMB/ CIPS), ANRProtocols IPv4/IPv6, HTTP, HTTPS, 802.1x, QoS, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NTP, RTSP, RTCP, RTP, TCP/IP, UDP, IGMP, ICMP, DHCP, PPPoE, Bonjour, Websocket, WebsocketsAPI Open-ended, support Open Network Video Interface, ISAPI, and CGI, support HIKVISION SDK and Third-Party Management Platform, support Hik-ConnectSimultaneous Live View Up to 20 channelsUser/Host Up to 32 users,3 levels: Administrator, Operator and User Client iVMS-4200, HikCentral Pro, Hik-ConnectWeb Browser IE 10-11, Chrome 57+, Firefox 52+, Safari 11+ImageImage Enhancement 3D DNR, BLC, HLC, Regional Exposure, Regional Focus Max. Resolution 2560 × 1440Main Stream 50 Hz: 25 fps (2560 × 1440, 1920 × 1080, 1280 × 960, 1280 × 720);60 Hz: 30 fps (2560 × 1440, 1920 × 1080, 1280 × 960, 1280 × 720)Sub-Stream 50Hz: 25 fps (704 × 576, 640 × 480, 352 × 288), 60Hz: 30 fps (704 × 480, 640 × 480, 352 × 240)Third Stream 50 Hz: 25 fps (704 × 576, 640 × 480, 352 × 288);60 Hz: 30 fps (704 × 480, 640 × 480, 352 × 240)InterfaceAudio Input 1-ch audio inputAudio Output 1-ch audio outputNetwork Interface 1 RJ45 10 M/100 M Ethernet, PoEBuilt-in Microphone 1 built-in microphone, picking up sounds in the radius up to 5 meters Smart FeaturesBasic Event Detection Motion Detection, Video Tampering Detection, ExceptionSmart Detection Face Detection, Intrusion Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, Object Removal Detection, Unattended Baggage Detection, Audio Exception DetectionSmart Record ANR (Automatic Network Replenishment), Dual-VCAROI Main stream, sub-stream, and third stream respectively support two fixed areas. GeneralMaterial Aluminum alloy, PC, PC+ABSDimensions Ø 130.7 mm × 101.7 mm (Ø 5.15" × 4.00")Weight Approx. 0.53 kg (1.17 lb)Protection Level IP66 Standard, IK10, TVS 4000V Lightning Protection, Surge Protection and Voltage Transient ProtectionPower 12 VDC, 1.5 A (Max. 9.9 W, including max. 4.2 W for IR)PoE (802.3af), 36 to 57 VDC, 0.35 A (Max. 11.2 W, including max. 4.2 W for IR)Working Temperature -20°C to 60°C (-4°F to 140°F) Working Humidity ≤ 90%⏹Typical ApplicationHikvision products are classified into three levels according to their anti-corrosion performance. Refer to the following description to choose for your using environment.This model has NO SPECIFIC PROTECTION. LevelDescription Top-level protection Hikvision products at this level are equipped for use in areas where professional anti-corrosionprotection is a must. Typical application scenarios include coastlines, docks, chemical plants, andmore.Moderate protection Hikvision products at this level are equipped for use in areas with moderate anti-corrosiondemands. Typical application scenarios include coastal areas about 2 kilometers (1.24 miles) awayfrom coastlines, as well as areas affected by acid rain.No specific protection Hikvision products at this level are equipped for use in areas where no specific anti-corrosionprotection is needed.⏹ Dimension⏹ Available ModelHWP-N2404IH-DE3 (F)⏹Accessory⏹OptionalDS-1294ZJ-PT。
赫斯曼交换机产品介绍
• 9 ports • 17 ports • 25 ports
3FX / 6TX 3FX / 14TX 3FX / 22TX
e.g.：RS20-0900MMM2SDAE
7
4个光纤接口的千兆交换机
2 个千兆光口 2 个百兆光口 6/14/22 ports
1000BaseFX SFP插槽方式(LC型连接器） 100BaseFX SFP插槽方式(LC型连接器) 10/100 TX
13
产品型号－ OPENRAIL系列
1设计 2端口数量 3端口类型 4工作温度及涂层 5供电要求 6认证要求 7软件功能版本 8配置类型 9OEM类型 10软件发布号
RS30 08 00 M2 S2 S D A E H C 02.0
14
RS30 － 08 02 T1 O6 S D A P H C 01.0
赫斯曼工业以太网交换机产品说明
上海海得控制系统股份有限公司 工业IT事业部 交通行业组 王海刚
1
赫斯曼交换机的特性
外形 设计区分 端口数量 端口带宽类型 端口介质类型 端口连接器 温度范围 保护土层(PCB) 供电类型 认证要求
软件版本
增加客户定制的特性
外形尺寸大小？ 机架式(MACH,LION系列)/一体化(RS系列)/模块化(MS系列) 能提供或支持的最大端口数量 10GE,GE 或 FE 双绞线，多模光纤，单模光纤及长距离光纤等 RJ45，M12，MTRJ，SC，LC，ST 标准 0℃ -> +60℃，或扩展 -40℃ -> +70℃ 标准，或带保护涂层（防止SO2，H2S...） 12/24/48VDC，24 VAC …… 标准 cUL 508 cUL1604 class 1 DIV2 扩展增加 German LIoyd，铁路标准 EN 50121-4 和 EN 50155，ATEX 100a Zone 2，Substation IEC 61850 标准版（提供普遍的诊断、交换和相关冗余功能） 增强版（除具备增强版的所有功能以外，还带有更多安全和 冗余功能） 例如软件配置，OEM 版本，软件版本等
赫优讯自动化系统通用网关NT 100-RE-DP试验指南说明书
德国赫优讯自动化系统有限公司上海代表处 Hilscher GmbH Shanghai Rep. Office 上海市黄浦区人民路885号 Huaihai China Tower 2208 淮海中华大厦2208 Ren Min Road No. 885 邮政编码：200010 200010 Shanghai, ChinanetTAP 通用网关——实时以太网现场总线网关NT 100-RE-DP试验指南（V1.0）2009年5月I德国赫优讯自动化系统有限公司上海代表处 Hilscher GmbH Shanghai Rep. Office 上海市黄浦区人民路885号 Huaihai China Tower 2208 淮海中华大厦2208 Ren Min Road No. 885 邮政编码：200010 200010 Shanghai, China 目 录1. 产品简介.........................................................................1 2. 试验准备.........................................................................2 3. 硬件连接.........................................................................2 4. 软件安装.........................................................................3 4.1 cifX 设备驱动安装...................................................3 4.2 NT 100 USB 设备驱动安装.......................................6 4.3 系统配置软件 的安装............................9 5. 系统配置.......................................................................12 5.1 NT 100-RE-DP 配置.................................................12 5.2 cifX 50-RE 配置.....................................................21 6. 通讯测试.......................................................................29 7. Modbus/TCP 客户端与PROFIBUS 从站通讯................31 8. 恢复出厂设定 (36)Page 1of 36德国赫优讯自动化系统有限公司上海代表处 Hilscher GmbH Shanghai Rep. Office 上海市黄浦区人民路885号 Huaihai China Tower 2208 淮海中华大厦2208 Ren Min Road No. 885 邮政编码：200010 200010 Shanghai, China 1. 产品简介NT 100系列网关（如图1.1所示）是赫优讯推出的基于netX 芯片技术的产品，其充分使用了netX 网络控制器的灵活性特点，提供了一种经济、有效的联网通讯解决方案，以实现不同协议之间的转换。
Herter 2012-2014 仪器设备目录说明书
MPIII-7150 MPIII-7300
MPIII-3000
MPIII-7500T1 MPIII-3080
MPIII-6700
MPRF-PR
MPRF-RH
MPRF-RPTR
LCA501
LCA301
ip 67
DHD2303.0
ip 67
DAP472S2 DAP472S4
DAP471S5
DAP471S3DAP471S2
DAP471S1
CAPTURE HOOD PANDA
GEOS11
990
8908AZ
TUBOS PITOT
XGRID
PVM610
DHD2114.0
DHD2114.2 ip 67
S T E D
283 / 284
270
282E 406 / 407
404
410 / 413250262
472490
288E
30.1039417
451
14.4006 - 710
1096 / 1116487
14.4000 - 409
1090 / 11101032 / 1062
La referencia
ip 67
ip 65
31.1020 - 5726
5987
5989
5989M / 5989M-300
5981
O
N F O R M ip 64
RAYDUAL RAYFLASH
RAYFLASH III
RAY8875HACCP
Eaton N484-12M12 40Gb Pass-Through Cassette 产品说明说明
Important NoteGuaranteed compatibility when used with recommended cabling. Designed specifically for use with N842-, N844- and N845-Series cables.40Gb Pass-Through Cassette - (x12) 12-Fiber MTP/MPO ( Female )MODEL NUMBER:N484-12M12DescriptionThe N484-12M12 is a high-density 40 Gb pass-through cassette, with (x12) 12-Fiber MTP/MPO connections. Designed specifically for use with N484-00U and N484-01U chassis. Up to four cassettes per N484-01U or one cassette per N484-00U. Each MTP/MPO connector is rated for up to 40 GbE, with an extremely low insertion loss of 0.35db, well under the IEEE 802.3ae maximum channel loss spec of<25db. Guaranteed compatibility when used with recommended cabling. Designed specifically for use with N842-, N844- and N845-Series cables. Installation is simple, with the cassette being easily installed or removed using screw tabs to lock or unlock it from the panel; no tools required. Furthermore, each cassette features factory-terminated connectors that reduce the time and labor required of field connector terminations. Cassette housing made with heavy-duty 1.0mm cold-rolled steel.FeaturesHigh Density Fiber Cassette for use with N484-00U and N484-01U chassis'q40 Gb Pass-through Cassette, with (x12) 12-Fiber MTP/MPO connectionsqMax insertion loss of 0.35dB falls well under the IEEE 802.3ae maximum channel loss spec of <25dBqGuaranteed compatibility when used with recommended cablingqDesigned specifically for use with cables, such as the N842-, N844- and N845-Series cablesqInstallation is simple, with the cassette being easily installed or removed using screw tabs to lock or unlock it from the panel; no tools requiredqFactory terminated connectors reduce the time and labor required of field connector terminationsqHousing made of heavy duty, 1.0mm Cold Rolled SteelqIncludes dust caps for unused portsq HighlightsHigh Density Fiber Cassette foruse with N484-00U and N484-01U chassis'q40Gb Pass-through Cassette,with (x12) 12-Fiber MTP/MPOconnections ( Female )qGuaranteed compatibility whenused with recommended cabling qDesigned specifically for usewith cables, such as the N842-,N844- and N845-Series cables qFactory terminated connectorsreduce the time and laborrequired of field connectorterminationsqSystem RequirementsGuaranteed compatibility whenused with recommended cabling qDesigned specifically for usewith N842-, N844- and N845-Series cablesqPackage IncludesN484-12M12 40GbE Pass-Through Cassette - (x12) 12-Fiber MTP/MPO ( Female )qQuick Start GuideqSpecifications© 2023 Eaton. All Rights Reserved. Eaton is a registered trademark. All other trademarks are the property of their respective owners.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Page No. : 1/2
HMBT4125
PNP EPITAXIAL PLANAR TRANSISTOR
Description
The HMBT4125 is designed for general purpose switching and amplifier applications.
Absolute Maximum Ratings
• Maximum Temperatures
Storage Temperature............................................................................................ -65 ~ +150 °C Junction Temperature.................................................................................................... +150 °C • Maximum Power Dissipation
Total Power Dissipation (Ta=25°C)................................................................................ 225 mW • Maximum Voltages and Currents (Ta=25°C)
VCBO Collector to Base Voltage........................................................................................ -30 V VCEO Collector to Emitter Voltage..................................................................................... -30 V VEBO Emitter to Base Voltage.......................................................................................... -4.0 V IC Collector Current....................................................................................................... -200 mA
Characteristics (Ta=25°C)
Symbol Min.Typ.Max.Unit Test Conditions
BVCBO -30--V IC=-10uA BVCEO -30--V
IC=-1mA BVEBO -4--V IE=-10uA ICBO ---50nA VCB=-20V IEBO ---50nA VBE=-3V
*VCE(sat)---0.4V IC=-50mA, IB=-5mA *VBE(sat)---950mV
IC=-50mA, IB=-5mA *hFE150-150VCE=-1V, IC=-2mA *hFE225--VCE=-1V, IC=-50mA
fT 200--MHz VCE=-20V, IC=-10mA, f=100MHz Cob
-- 4.5
pF
VCB=-5V, f=1MHz
*Pulse Test: Pulse Width ≤380us, Duty Cycle ≤2%
Page No. : 2/2
SOT-23 Dimension
*: Typical
Inches Millimeters
Inches Millimeters
DIM Min.Max.Min.Max.DIM Min.Max.Min.Max.A 0.11020.1204 2.80 3.04J
0.00340.00700.0850.177B 0.04720.0630 1.20 1.60K 0.01280.02660.320.67C 0.03350.05120.89 1.30L 0.03350.04530.85
1.15D 0.01180.01970.300.50S 0.08300.1083
2.10 2.75G 0.06690.0910 1.70 2.30V
0.00980.02560.250.65
H
0.00050.00400.0130.10
Notes: 1.Dimension and tolerance based on our Spec. dated Sep. 07,1997.
2.Controlling dimension: millimeters.
3.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
4.If there is any question with packing specification or packing method, please contact your local HSMC sales office.
Material:
• Lead: 42 Alloy; solder plating
• Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0
Important Notice:
• All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC.• HSMC reserves the right to make changes to its products without notice.
• HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
• HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
• Head Office (Hi-Sincerity Microelectronics Corp.): 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C.Tel: 886-2-25212056 Fax: 886-2-25632712, 25368454
• Factory 1: No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.C Tel: 886-3-5983621~5 Fax: 886-3-5982931。