G3VM-353A中文资料

G3VM-353A/B/D/E MOS FET RelayMOS FET Relay with N.C. (Normally Closed) Contacts for Switching Analog Signals

sSPST-NC contact form.sSwitches minute analog signals.sSwitches AC and DC.sLow ON-resistance.sUL/CSA approval pending.

sAppearance

Ordering InformationApplication Examples•Electronic automatic exchange systems•Datacoms and modems•Measuring systems•Security systems•FA

ROMRON logoModel name

LOT No.

Note: "G3VM" is not printed on the actual product.

Contact formTerminalsLoad voltage (peak value)ModelNumber per stickTaping quantitySPST-NCPCB terminals350 VACG3VM-353A100---G3VM-353B50

Surface-mounting terminals

G3VM-353D100G3VM-353E50G3VM-353D(TR)---1,500G3VM-353E(TR)

元器件交易网www.cecb2b.comG3VM-353A/B/D/EG3VM-353A/B/D/ESpecificationssG3VM-353A/DAbsolute Maximum Ratings (Ta = 25°C)

NoteThe dielectric strength between I/O terminals was measured with voltage applied to all of the input pins and all of the output pins.Electrical Performance (Ta = 25°C)

NoteThe operate and release time were measured in the way shown below.Recommended Operating Conditions

ItemSymbolRatingConditionsInputLED forward currentIF50 mA---

LED forward current reduction rate∆IF/°C–0.5 mA/°CTa ≥ 25°CRepetitive peak LED forward currentIFP1 A100-µs pulses, 100 ppsLED reverse voltageVR5 V---Permissible lossPin50 mW---Connection temperatureTJ125°C---

OutputOutput dielectric strengthVOFF350 VAC peak valueContinuous load currentIO150 mA---Peak load currentIpeak0.35 A---Output lossPout506 mW---ON current reduction rate∆ION/°C–1.5 mA/°CTa ≥ 25°C

Total permissible lossPT556 mW---Dielectric strength between I/O terminals (See note.)VI–O2,500 VrmsAC, 1 minInsulation resistanceRI–O5 × 1010 MΩVS = 500 V, ambient operating humidity ≤ 60%

Storage temperatureTstg–55 to 125°C---Ambient operating temperatureTa–40 to 85°C---

ItemSymbolMinimumStandardMaximumConditionsInputLED forward currentVF1.0 V1.15 V1.3 VIF = 10 mA

Reverse currentIR------10 µAVR = 5 VCapacity between terminalsCT---30 pF---V = 0, f = 1 MHz

OutputMaximum resistance with output ONRON---15 Ω25 ΩION = 150 mA

Current leakage when the relay is closedILEAK------1 µAVOFF = 350 V, IF = 5 mA

Turn-ON timeTON---0.1 ms1 msRL = 200 Ω (See note.)VDD = 20 V, IF = 5 mA

Turn-OFF timeTOFF---1 ms3 ms

Floating capacity between I/O terminalsCI–O---0.8 pF---VS = 0 V, f = 1 MHz

VOUT

IF

TONTOFF

10%90%

IF1243RL

VDD

VOUT

ItemSymbolMinimumStandardMaximumOperating voltageVDD------280 VForward currentIF5 mA---25 mA

Continuous load currentIO------150 mAOperating temperatureTa–20°C---65°C

元器件交易网www.cecb2b.comG3VM-353A/B/D/EG3VM-353A/B/D/EsG3VM–353B/EAbsolute Maximum Ratings (Ta = 25°C)

NoteThe dielectric strength between I/O terminals was measured with voltage applied to pins 1, 2, and 3 together, and to pins 4, 5, and6 together.

Connection Circuit Diagram

ItemSymbolRatingConditionsInputLED forward currentIF50 mA---LED forward current reduction rate∆IF/°C–0.5 mA/°CTa ≥ 25°CRepetitive peak LED forward currentIFP1 A100-µs pulses, 100 pps

LED reverse voltageVR5 V---Permissible lossPin50 mW---Connection temperatureTJ125°C---

OutputOutput dielectric strengthVOFF350 VAC peak value

Continuous load cur-rent (See note.)

A connectionIO150 mA

---B connection150 mAC connection300 mAPeak load currentIpeak0.35 A---

Output lossPout506 mW---

ON current reduction rate

A connection∆ION/°C–1.5 mA/°C

Ta ≥ 25°CB connection–1.5 mA/°C

C connection–3.0 mA/°C

Total permissible lossPT556 mW---Dielectric strength between I/O terminals (See note.)VI–O2,500 VrmsAC, 1 min

Insulation resistanceRI–O5 × 1010 MΩ

VS = 500 V, ambient operating

humidity ≤ 60%

Storage temperatureTstg–55 to 125°C---

Ambient operating temperatureTa–40 to 85°C---

󰊙Loador AC DC

1

23

654

A connectionB connectionC connection

123654DCLoad123

654DC

Load

元器件交易网www.cecb2b.com