西门子电机motor.1FK7+geared
西门子伺服电机_图文
5
1对于额定4500RPM ,这些值对应于n=3500rpm ;对于额定6000RPM ,这些值对应于n=4500rpm ;对于额定4500RPM ,这些值对应于n=4000rpm ;对于额定6000RPM ,这些值对应于n=5500rpm ;
3在空气温度为+40°C的情况下连续运转时,功率电缆的载流能力符合IEC 60 04-1规定的C类布线方式要求,设计规格为I0(100K,PVC/PUR绝
带有滑键和键槽N无A带有滑键和键槽N有B带有滑键和键槽R无D带有滑键和键槽R有E光轴N无G光轴N有
H光轴R无K光轴R有L
振动强度等级:防护等级:等级A IP64 0等级A IP65 1等级A IP67等级R IP64 3等级R IP65 4等级R
8轴高为0的电机没有DRIVE-CLiQ接口,编码器必须通过SMC传感器模块来连接。
4
注意:1FK7 30V系列的伺服电机,目前主要用于与1AC 30V Sinamics S1 0单轴驱动系统连接。
1 3 4 5 6 7 8 9 10 11 1 13 14 15 16
订货号下标:
1
F
K
7 ■ ■ ■ - ■ ■ ■ 1 - 1 ■ ■ ■编码器系统,用于没有DRIVE-CLIQ接口的电机:增量式编码器sin/cos 1V PP , 048S/R
IP64
(可选IP65,IP67
自然冷却8~13 0. ~15.5 1.4-61强制冷却63~80 3.8~10.81 ~33水冷
63~100
3.1~3
4.
10~109
1FS6防爆永磁同步电机,符合Eex DE II CT3防爆标准IP64(可选IP65自然冷却71~13 1. ~1 .4 1.9~68
西门子变频电机选型手册
西门子电机（中国）有限公司
西门子电机（中国）有限公司是西门子在中国的独资企 业，位于江苏省仪征市，占地面积为 12.5 万平方米。公 司主要致力于研发和生产中小型低压三相异步电动机， 目前生产符合 IEC 标准的西门子品牌三相异步电动机、 以及按中国标准设计的贝得品牌系列三相异步电动机。
作为西门子在全球中小型低压电机产品的重要生产基地 之一，公司坚持秉承西门子 100 多年的电动机设计和生 产经验和先进技术，拥有先进的生产设备和生产工艺， 采用西门子特色的现代化管理模式，严格按照国际标准 ISO9001:2008 实施全面质量管理，竭诚为广大客户提供 优质的产品和服务！
安装结构型式
结构型式 安装型式
示意图
IM B3 FS 80 ~ 355
IM B6 FS 80 ~ 160
机座带底脚，端盖无法兰
IM B7 FS80 ~ 160
IM B8 FS 80 ~ 160
IM V5 1) FS 80 ~ 160
IM V6 2) FS 80 ~ 160
结构型式 安装型式
示意图
机座不带底脚，端盖有法兰
标称 功率 (kW)
0.75 1.1 1.5 2.2 3
4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 185 200 220 250 280 315
额定 转速 (rpm)
额定 电流 (A)
额定 转矩 (Nm)
3000rpm 2 极
220VD/380VY 50 HZ
1TL000
－
－
低压系列电动机
2 = 变频调速三相异步电动机
机座号（中心高）编号 0D = 080；0E = 090 1A = 100；1B = 112；1C = 132；1D = 160；1E = 180 2A = 200；2B = 225；2C = 250；2D = 280 3A = 315；3B = 355
西门子电机介绍
大家好！我是西门子中国有限公司自动化与驱动集团运动控制部的工程师刘同，欢迎光临我们的课堂，现在由我向大家介绍西门子的新型电机。
西门子可以提供从普通异步电机到伺服电机的一系列电机，能满足各种行业的传动需要。
具体到机床行业，由于机床是制造生产机械的设备，故对精度和动态性能都有较高的要求，所以机床上使用的电机主要是伺服电机，国内目前使用的西门子伺服电机主要有3种：即1FT5电机,1FK6电机,1FT6电机.1FT5电机与SIMODRIVE 611A配合构成模拟驱动系统，可连接具有模拟接口的数控系统，如西门子的SINUMERIK 810/850/880/840C等系统;1FK6/1FT6电机与SIMODRIVE 611D/611U配合构成数字驱动系统，可连接具有数字接口的数控系统，如西门子的SINUMERIK 802D/810D/840D/840Di等系统.2001年西门子又推出了一个新的伺服电机系列：1FK7电机.1FK7电机是在1FK6电机的基础上开发的，机械接口完全与1FK6电机兼容，但性能上有所提高。
下面我们来了解一下1FK7电机。
目前使用的1FK6伺服电机分为基本型和高动态性能型两类。
1FK7伺服电机推出时依然分为两类：即CT型和HD型。
CT是英文Compat的缩写，即紧凑型。
HD是英文High Dynamic的缩写，即高动态性能型。
CT型电机和HD型电机应用的场合是有所区别的：CT型电机主要用于安装空间狭小的场合，适用于大多数的行业应用；HD型电机主要用于对动态性能有较高要求的生产机械。
如果按照轴高来分的话，1FK7电机有28mm,36mm,48mm,63mm,80mm和100mm共6种。
1FK6电机没有28mm轴高的电机。
西门子有多种驱动可与1FK7电机配合使用，包括：810D内部的驱动器SIMODRIVE 611D伺服驱动器SIMODRIVE 611U伺服驱动器MASTERDRIVE MC工程型变频器以及POSMO分布式驱动器上位控制系统可以根据应用场合来选择，如果驱动系统用在机床上可以选择西门子的SINUMERIK数控系统（如802D,810D,840D)；如果驱动系统用在一般生产机械上则可以使用西门子的SIMATIC可编程逻辑控制器.1FK7电机与现在使用的1FK6电机,1FT6电机在性能上有何不同呢？大家从这张图上可以看出：首先看纵轴，纵轴反映的是电机的力矩波动，其中1FT6电机波动最小，其次是1FK7电机。
西门子SIRIUS 3RM1电机启动器说明书
/controlsStart-up with a small footprintSIRIUS 3RM1 Motor Starter – multifunctional with a width of just 22.5 mmSIRIUS HybridGetting started –even when things get tight:SIRIUS 3RM1 Motor StartersSpace-saving systems require maximum efficiency and can pose significant challenges for system engineers. Systems and machinery are becoming in-creasingly compact and are expected to have smaller footprints, but at the same time they typically require more auxiliary drives. Because every inch counts in a control cabinet, SIRIUS 3RM1 Motor Starters are precisely tailored to meet these requirements and represent the solution for the development of cutting-edge and future-oriented systems.Their innovative housing concept even received the internationally renowned iF product design award 2013. It’s easy to get started: The new motor starters are so narrow that they fit into the smallest space.In brief: SIRIUS 3RM1 Motor Starters – multifunctional with a width of just 22.5 mm.The SIRIUS 3RM1 Motor Starters are designed for installation in control cabinets and require minimal space: They combine the functionality of con-tactors and overload relays in a width of just 22.5 mm. In addition, thanks to their use of hybrid switching technology, they have all the benefits of the relay and semiconductor technology in a single device, which increases their cost-effectiveness.The motor starters make your work easier by offering easy adjustment of motor current, minimal wiring costs, and fast troubleshooting. With these motor starters, you can build more com- pact control cabinets and increase the efficiency of your systems while saving time and money in the installation.3RM1 motor starters can optionally be used in combination with a fuse module for short-circuit protection on all 60 mm busbar systems using a range of adapters.Direct or reversing starting – with SIRIUS 3RM1 Motor Starters, you can implement compact control cabinet solutions for small motors up to 3 kW.2Economical• Durable and energy-efficienthybrid switching technology • Low device variance through wide adjustment rangeCompact• Narrow width • Multifunctionality– D irect and reversing starters – O verload protection – Safe shutdownSimple• Less wiring– i n control circuit thanks to device connectors – i n main circuit with the infeed system • Fast diagnostics• Compact mounting on busbar systems using the 3RM19 fuse module3Conventional reversing starterCon- tactorContactor140 m m90 mm100 m m22.5 mmOverload relayNarrow widthThe motor starters are distinguished by their narrow width of just 22.5 mm. That saves room in the control cabinet and provides the ideal conditions for systems and machines with many small motors up to 3 kW.Even subsequent expansions are easier to plan and imple-ment: If more motors are needed in the system, thanks to their narrow width it’s easy to add additional SIRIUS 3RM1 Motor Starters to the ones already installed in the control cabinet.The new motor starters optimally round out the SIRIUS portfolio of industrialcontrols technology: They combine several functions – such as direct or reversing start, overload protection, and safe shutdown – into a uniformly compact and extremely narrow housing.Conventional direct starter140 m m45 mm100 m m22.5 mm Conventional reversing starter with safetyContactorOverload relay185 m m90 mm100 m m22.5 mmContactorCon- tactorScan and learn more about space savings in control cabinets!4Safe shutdownTo meet the requirements for safe shutdowns, SIRIUS 3RM1 Motor Starters are also available in a safety version. They can be used in combination with the modular safety relays to easily implement locally limited safety applications.The motor starters for safe shutdowns are available as direct and reversing starters.They are certified in accordance with SIL 3/PL e Cat. 4.MultifunctionalDirect and reversing startersMotor starters are available as direct starters or with a re-versing starter function, all in a uniform housing design. The operation, configuration, and the width for both device types are identical.Overload protectionEvery motor starter is equipped with integrated electronic overload protection. In other words, you no longer need a separate overload relay when you use these motor starters. The result is lower wiring costs, shorter installation time and more room on the DIN rail.The motor overload protection of the safety version is ATEX certified, which means that it can also be used for motors in explosion-proof areas with flammable dust and gases.5Durable and energy-efficientHybrid switching technology uses low-wear semiconductor technology for turning the motor on and off; during operation, it uses energy-efficient relay technology. That pro-vides durability, particularly in cases of high switching frequency. This technology signifi-cantly reduces maintenance costs and ex-tends the service life of the motor starters. In addition, thanks to the hybrid switching technology, the motor starters have a lower level of electromagnetic interference, which increases the availability of your systems.Further energy savings are provided by the integrated electronic overload protection. It causes a lower intrinsic power loss than com-parable motor feeders with thermal overload protection. In this way, you benefit from re-duced heat generation and therefore lower cooling power. That saves energy.Flexible useSIRIUS 3RM1 Motor Starters give you greater latitude when it comes to project planning as well as motor replacements: You can use a rotary encoder switch to easily set the motor starters in their specific adjustment range to the current of the connected motor.That reduces the number of device variants and saves on storage space and handling costs. Moreover, your options are kept open for longer when planning and engineering motors and control cabinets. And, if a motor is later replaced by a more powerful or less powerful model, in most cases you can simply readjust the existing motor starter and do not need to replace it.Increase the efficiency in the control cabinet with energy-efficient and durable tech- nology and benefit from a clear spectrum of devices.The hybrid switching tech- nology of the motor starters combines the benefits of relay technology with those of semiconductor technology, making it particularly energy- efficient while offering low wear and low interference.✓Service lifeScan and experience the benefits of hybrid switching technology!6Reduced wiringControl circuitFor simultaneous safety-oriented tripping of multiple motor starters via a SIRIUS 3SK safety relay, you can simply interconnect devices using a device connector, without any wiring. This also relays the power supply.Main circuitThe power supply in the main circuit for mul-tiple motor starters can be handled quickly, simply, and safely via a special system: The motor starters are interconnected via 3-phase busbars and powered via a 3-phase infeedterminal. The special shape of the busbars allows quick and simple removal of individual devices from the infeed network.Simple design of load feedersVery compact load feeders with a narrow width of just 22.5 mm can be implemented using the fuse module. A corresponding adapter connects the module to the busbar system. The plug-in connection makes it even easier to replace motor starters, for example, if outputs need to be adjusted. Expansions can easily be added later into spare slots without having to install power supply cables.Save time during installationthanks to simple wiring, and duringoperation thanks to clear statusindication. Whether for configur-ing, installation or maintenance –these motor starters make every-thing easier for you.Simple connectionYou benefit from convenient connectionswhen wiring the devices. The screw-typeterminals for the control circuit have anoptimized insertion angle so that tooland cable can be inserted from the samedirection. The spring-loaded terminals arewired without tools: simply insert the cablemanually – done!If necessary, you can individually swapout the removable connection terminalson the unit.Easy-to-read status indicatorThanks to the LED status indicator on thehousing of the SIRIUS 3RM1 Motor Starters,you can see at a glance whether all thefunctions are in operation or if there are anyproblems. This makes it possible to quicklydetect and correct any faults.SIRIUS 3RM19 fusemoduleSIRIUS 3RM1 motorstarterAdapter for busbarsystemAdapter for compactbusbar systemCover profiles forbusbarsThe optional fuse module canbe used to create completeload feeders.7Diverse range of applicationsSIRIUS 3RM1 Motor Starters can be used inmany industrial areas to control auxiliarymotors, such as for pumps, fans, and hoist-ing equipment, in machine tool and produc-tion machines, as well as in conveyor tech-nology. The devices are optimally suitedfor group configurations in which multiplemotor starters can be protected by onlyone circuit breaker.The motor starters for safe shutdown canbe flexibly combined with a wide varietyof safety relays and fail-safe controls.Scan und experiencethe safe shutdown ofa system for yourself!Ideal addition to the SIRIUS switching technology portfolioThe SIRIUS portfolio is ideally positioned for higher switching currents. The new motor starters perfectly round out the existing SIRIUS industrial switching tech-nology portfolio in the field of smaller motors. With a width of just 22.5 mm, the new SIRIUS 3RM1 Motor Starters are perfect for control cabinets where space is at a premium.SIRIUS 3RM1 Motor Starters can be used with a wide range of motorsup to 3 kW. They are particularly well suited for use in machine tool and production machine construc-tion – whether as an individual device, or as components in a group design for applications with or with-out safe shutdown requirements.8Group design for a conveyor systemWith SIRIUS 3RM1 Motor Starters, you can quickly and easily implement group installa-tions with integrated overload protection for a wide range of applications – one example would be for conveyor systems with numer-ous electric motors. In the main circuit, the three-phase feeder terminal and three-phase busbar supply the motor starters, eliminating the need for complex wiring for the infeed. In a group design, a single circuit breaker can provide short circuit protection up to 55 kA.Significant provisions are in place for the ex-pansion of the conveyor system – the infeed system has the flexiblility to be expanded, allowing additional motor starters to be in-tegrated into an existing group design with minimal effort. Project planning is simplified through the new motor starter configurator.Safe shutdown in a filling systemThe combination of fail-safe SIRIUS 3RM1 Motor Starters with SIRIUS 3SK Safety Relays makes it easy to implement locally limited safety applications. One example can be found in the protective door monitoring of a machine, that safely shuts down when the protective door is opened.To accomplish this, the motors of the pumps are connected to the new motor starters. On the control current side, the motor starters are connected to a SIRIUS 3SK Safety Relay via the device connector. If the monitored door is opened, the safety relay receives a signal from a connected non-contact safety switch, evaluates it, and sends the informa-tion to all the motor starters in the group via the device connector. The fail-safe motor starters react by safely shutting down allconnected motors.Combination of one SIRIUS 3SK safety relay and four motor start-ers for a safe group shutdown.The infeed system supplies group configurations up to a total current of 25 A.9Innovative housing conceptDevice connectorEasy, wireless connection of mul-tiple motor starters for connecting to SIRIUS 3SK Safety Relays for safe shutdownLabeled hinged coversSimple orientation thanks to laser labeling for the individual connections in the coverWidthEconomical, space-saving width of just 22.5 mmSealable coverSimple protection against unauthorized access2D matrix codeFast and easy scanning of order and serial numbers; corresponding Siemens app available at/sirius/support-appScrew-type connectionConnection terminalsEasily replaceable connection ter-minals, available with screw-type or spring-loaded technologySpring-loaded connectionRotary encoder switchEasy setting of the motor current to be monitored Test/reset buttonAcknowledgement if a malfunction occurs 1. R eset in case of overload 2. I mplement the test function 3. S witch from manual to automatic resetLED status indicatorFast, selective start-up, and clear LED error display10Step 1:To find the right motor starter, you first need to decide whether you need a device with or without the integrated safety func-tion as well as whether you want a direct ora reversing starter.Step 2:Decide between the three motor current ranges 0.1 … 0.5 A; 0.4 … 2.0 A; and1.6 … 7.0 A (even for resistive loads of up to 10 A). You can subsequently set the level of the motor current to be monitored via the rotary encoder switch on the motor starter – and if the application changes, you can make adjustments within the specific wide setting range.Step 3:For additional product specification, choose between the two control voltages 24 V DC and 110 – 230 V AC, 110 V DC.Step 4:Finally, you need to decide which connection technology you prefer: spring-loaded con-nections or screw-type connections.All the product data you need for planning your control cabinet is available free of charge via CAx Download Manager: Available data includes 3D models, dimension draw-ings, manuals, and .edz macros for EPLAN Electric P8. For more information, visit /planning-efficiencyThe right type for youOrder number overviewSIRIUS 3RM1 Motor Starter1) Base 4-pin with AC 400 V; the concrete start-up and rated data of the motor should be taken into consideration for the selection2) Operation of ohmic loads with a maximum of 10 A3) Control circuit implemented as a push-in spring-loaded connection and main circuit as a screw-type connection11Siemens Industry Inc.3617 Parkway LanePeachtree Corners, GA 300921-866-663-7324*******************Subject to change without prior noticeOrder No.: CPBR-3RM1-0820Article No.: DFCP-B10060-01-7600All rights reservedPrinted in USA© 2020 Siemens Industry, Inc.The technical data presented in this document is based on an actual case or on as-designed parameters, and therefore should not be relied upon for any specific application and does not constitute a performance guarantee for any projects. Actual results are dependent on variable conditions. Accordingly, Siemens does not make representa-tions, warranties, or assurances as to the accuracy, currency or completeness of the content contained herein. If requested, we will provide specific technical data or specifications with respect to any customer’s particular applications. Our company is constantly involved in engineering and development. For that reason, we reserve the right to modify, at any time, the technology and product specificationscontained herein.。
西门子同步电机 1FK7操作说明书
Siemens AG Industry Sector Postfach 48 48 90026 NÜRNBERG 德国
文件订购号: 610.40700.97c Ⓟ 03/2011
Copyright © Siemens AG
2011. 本公司保留技术更改的权利
购买相关产品联系重庆艾利顿自动化 余经理 联系电话：18280227007
目录
1 引言 ..................................................................................................................................................5
结构 .................................................................................................................................... 15 标准 .................................................................................................................................... 15 结构形式............................................................................................................................. 16 防护等级............................................................................................................................. 16 环境条件............................................................................................................................. 16 冷却 .................................................................................................................................... 17 噪声排放............................................................................................................................. 17
西门子电机参数
选型技术数据表 Technical data table ............................................................. 22
■ Available in 2, 4, 6 pole variants with efficiency grade 2. according to GB18613-2006 and efficiency class IE2 according to IEC 60034-30.
■ 额定功率：0.55 kW ~ 315 kW（50 Hz）；
■ Insulation system is designed for temperature class 155 (F). At rated output with line-fed operation, the motors can be used in temperature class 130 (B).
Padm = Prated • kHT
对于不同高度和（或）不同环境温度的功率换算系数 kHT Factor kHT for different side altitudes and / or coolant temperature
海拔高度 Site altitude above see level
对应海拔高度的环境温度 Site altitude above see level Coolant temperature
55 ºC 0.87 0.84 0.82 0.78 0.75 0.71 0.67
西门子各种装置基本参数设置
6SE70调试基本参数设置恢复缺省设置P053=6 允许参数存取6：允许通过PMU和串行接口OP1S变更参数P060=2 固定设置菜单P366=0 0：具有PMU的标准设置1：具有OP1S的标准设置P970=0 参数复位参数设置 P060=5 系统设置菜单P071= 装置输入电压P095=10 异步/同步电机，国际标准P100= 1：V/f控制3：无测速机的速度控制4：有测速机的速度控制5：转矩控制P101= 电机额定电压P102= 电机额定电流P103= 电机励磁电流，如果此值未知，设P103=0当离开系统设置，此值自动计算。
P104= 电机额定功率因数P108= 电机额定转速P109= 电机级对数P113= 电机额定转矩P114=3 3：高强度冲击系统（在：P100=3，4，5时设置） P115=1 计算电机模型参数值P350-P354设定到额定值P130= 10：无脉冲编码器11：脉冲编码器P151= 脉冲编码器每转的脉冲数P330= 0：线性（恒转矩）1：抛物线特性（风机/泵）P384.02= 电机负载限制P452= % 正向旋转时的最大频率或速度P453= % 反向旋转时的最大频率或速度数值参考P352和P353P060=1 回到参数菜单P128= 最大输出电流P462= 上升时间P464= 下降时间P115=2 静止状态电机辩识（按下P键后，20S之内合闸） P115=4 电机模型空载测量（按下P键后，20S之内合闸） 6SE70 变频装置调试步骤一.内控参数设定1.1 出厂参数设定P053=7 允许CBP+PMU+PC 机修改参数P60=2 固定设置，参数恢复到缺省P366=0 PMU 控制P970=0 启动参数复位执行参数出厂设置，只是对变频器的设定与命令源进行设定，P366 参数选择不同，变频器的设定和命令源可以来自端子，OP1S，PMU。
电机和控制参数未进行设定，不能实施电机调试。
西门子电机1FT7介绍
1FT7 电机系列高性能永磁同步伺服电机宣传册 2012.08MotorsAnswers for industry.1CAD CREATOR 软件可用于机械设计的尺寸图使用 SIZER 组态软件，可对电机进行组态，对所有所需驱动组件进行选型。
该软件会从选择型号类型开始，来逐步引导设计电机，形成所有所需产品列表和相关数据表。
与 SINAMICS 驱动器完美结合在开发 1FT7 电机时，即已考虑到了 SINAMICS S120 驱动器完美协同的问题。
尤其是配套运行的驱动模块、电子铭牌和通过 DRIVE-CLiQ 系统接口集成电机的能力，以确保快速、轻松地进行调试和无故障运行。
弱磁功能扩展了电机的有效速度范围。
预装配好的 MOTION-CONNECT 信号和动力电缆便于轻松、可靠的组件连接。
PROFINETPROFIBUSDRIVE-CLiQ电机的结构、接口和连接（以风冷型为例，电机中心高 48）1FT7 电机，电机中心高 80，强制风冷：电机中心高1FT7 电机，电机中心高 80，水冷带快插接头的旋转1FT7占用空间小1FT7 紧凑型1FT7 高动态型风冷强制风冷水冷强制风冷水冷36 ~ 10080, 10063 ~ 10063, 8063, 80IP64, IP65, IP67IP64, IP65IP64, IP65, IP67IP64, IP65IP64, IP65, IP67IM B5400 ~ 480 V本手册中提供的信息只是对产品的一般说明和特性介绍。
文中内容可能与实际应用的情况有所出入，并且可能会随着产品的进一步开发而发生变化。
仅当相关合同条款中有明确规定时，西门子方有责任提供文中所述的产品特性。
手册中涉及的所有名称可能是西门子公司或其供应商的商标或产品名称，如果第三方擅自使用，可能会侵犯所有者的权利。
西门子公司版权所有西门子（中国）有限公司工业业务领域驱动技术集团如有变动，恕不事先通知订货号: E20001-A0511-C500-V1-5D005137-S902418-01131北方区北京北京市朝阳区望京中环南路7号电话：(010) 6476 8888传真：(010) 6476 4838包头内蒙古自治区包头市昆区钢铁大街74号财富中心1905室电话：(0472) 520 8828传真：(0472) 520 8838济南山东省济南市舜耕路28号舜耕山庄商务会所5层电话：(0531) 8266 6088传真：(0531) 8266 0836青岛山东省青岛市香港中路76号颐中假日酒店4楼电话：(0532) 8573 5888传真：(0532) 8576 9963烟台山东省烟台市南大街9号金都大厦16层1606室电话：(0535) 212 1880传真：(0535) 212 1887淄博山东省淄博市张店区中心路177号淄博饭店7层电话：(0533) 218 7877传真：(0533) 218 7979潍坊山东省潍坊市奎文区四平路31号鸢飞大酒店1507房间电话：(0536) 822 1866传真：(0536) 826 7599济宁山东省济宁市高新区火炬路19号香港大厦361房间电话：(0537) 239 6000传真：(0537) 235 7000天津天津市和平区南京路189号津汇广场写字楼1401室电话：(022) 8319 1666传真：(022) 2332 8833塘沽天津市经济技术开发区第三大街广场东路20号滨海金融街E4C-315电话：(022) 5981 0333传真：(022) 5981 0335唐山河北省唐山市建设北路99号火炬大厦1308室电话：(0315) 317 9450/51传真：(0315) 317 9733石家庄河北省石家庄市中山东路303号世贸广场酒店1309号电话：(0311) 8669 5100传真：(0311) 8669 5300太原山西省太原市府西街69号国际贸易中心西塔16层1609B-1610室电话：(0351) 868 9048传真：(0351) 868 9046呼和浩特内蒙古呼和浩特市乌兰察布西路内蒙古饭店17层1720室电话：(0471) 620 4133传真：(0471) 628 8269乌鲁木齐新疆乌鲁木齐市五一路160号新疆鸿福大饭店贵宾楼918室电话：(0991) 582 1122传真：(0991) 584 6288银川银川市北京东路123号太阳神大酒店A 区1507房间电话：(0951) 786 9866传真：(0951) 786 9867兰州甘肃省兰州市东岗西路589号锦江阳光酒店2206室电话：(0931) 888 5151传真：(0931) 881 0707华东区上海上海杨浦区大连路500号西门子上海中心电话：(021) 3889 3889传真：(021) 3889 3266杭州浙江省杭州市西湖区杭大路15号嘉华国际商务中心1505室电话：(0571) 8765 2999传真：(0571) 8717 5234宁波浙江省宁波市江东区沧海路1926号上东国际2号楼2511室电话：(0574) 8785 5377传真：(0574) 8787 0631绍兴浙江省绍兴市解放北路玛格丽特商业中心西区2幢玛格丽特酒店10层1020室电话：(0575) 8820 1306传真：(0575) 8820 1632温州浙江省温州市车站大道高联大厦9层B1室电话：(0577) 8606 7091传真：(0577) 8606 7093南京江苏省南京市中山路228号地铁大厦17层电话：(025) 8456 0550传真：(025) 8451 1612扬州江苏省扬州市江阳中路43号九州大厦7楼704房间电话：(0514) 778 4218传真：(0514) 787 7115徐州江苏省徐州市彭城路93号泛亚大厦1807室电话：(0516) 8370 8388传真：(0516) 8370 8308苏州江苏省苏州市新加坡工业园苏华路2号国际大厦11层17-19单元电话：(0512) 6288 8191传真：(0512) 6661 4898无锡江苏省无锡市县前东街1号金陵大饭店2401-2402室电话：(0510) 8273 6868传真：(0510) 8276 8481南通江苏省南通市崇川区桃园路8号中南世纪城17栋1104室电话：(0513) 8102 9880传真：(0513) 8102 9890常州江苏省常州市关河东路38号九洲寰宇大厦911室电话：(0519) 8989 5801传真：(0519) 8989 5802盐城江苏省盐城市盐都区华邦国际东厦A 区2008室电话：(0515) 8836 2680传真：(0515) 8980 7580昆山江苏省昆山市伟业路18号昆山现代广场A 座1019室电话：(0512) 5511 8321传真：(0512) 5511 8323华南区广州广东省广州市天河路208号天河城侧粤海天河城大厦8-10层电话：(020) 3718 2222传真：(020) 3718 2164佛山广东省佛山市汾江中路121号东建大厦19楼K 单元电话：(0757) 8232 6710传真：(0757) 8232 6720珠海广东省珠海市景山路193号珠海石景山旅游中心229房间电话：(0756) 337 0869传真：(0756) 332 4473南宁广西省南宁市金湖路63号金源现代城9层935室电话：(0771) 552 0700传真：(0771) 556 9391深圳广东省深圳市南山区华侨城汉唐大厦9楼电话：(0755) 2693 5188传真：(0755) 2693 4245东莞广东省东莞市南城区宏远路1号宏远大厦1510室电话：(0769) 2240 9881传真：(0769) 2242 2575汕头广东省汕头市金砂路96号金海湾大酒店19楼1920室电话：(0754) 8848 1196传真：(0754) 8848 1195海口海南省海口市滨海大道69号宝华海景大酒店803房电话：(0898) 6678 8038传真：(0898) 6678 2118福州福建省福州市五四路89号置地广场11层04，05单元电话：(0591) 8750 0888传真：(0591) 8750 0333厦门福建省厦门市厦禾路189号银行中心21层2111-2112室电话：(0592) 268 5508传真：(0592) 268 5505湛江广东省湛江市经济开发区乐山大道31号湛江皇冠假日酒店1616单元电话：(0759) 338 1616传真：(0759) 338 6789华中区武汉湖北省武汉市汉口建设大道709号建设银行大厦20楼电话：(027) 8548 6688传真：(027) 8548 6777合肥安徽省合肥市濉溪路278号财富广场首座27层2701-2702室电话：(0551) 568 1299传真：(0551) 568 1256宜昌湖北省宜昌市东山大道95号清江大厦2011室电话：(0717) 631 9033传真：(0717) 631 9034长沙湖南省长沙市五一中路68号亚大时代写字楼2101，2101-2室电话：(0731) 8446 7770传真：(0731) 8446 7775南昌江西省南昌市北京西路88号江信国际大厦14楼1403/1405室电话：(0791) 8630 4866传真：(0791) 8630 4918郑州河南省郑州市中原区中原中路220号裕达国贸中心写字楼2506房间电话：(0371) 6771 9110传真：(0371) 6771 9120洛阳河南省洛阳市涧西区西苑路6号友谊宾馆516室电话：(0379) 6468 3519传真：(0379) 6468 3565南阳河南省南阳市卧龙区卧龙路兴达商务9楼电话：(0377) 6162 2636技术培训北京：(010) 6476 8958上海：(021) 6281 5933-305/307/308广州：(020) 3810 2015武汉：(027) 8548 6688-6400沈阳：(024) 2294 9880/8251 8219重庆：(023) 6382 8919-3002技术资料北京：(010) 6476 3726技术支持与服务热线电话：400 810 4288 (010) 6471 9990传真：(010) 6471 9991E-mail: @ Web: www. 亚太技术支持（英文服务）及软件授权维修热线电话：(010) 6475 7575传真：(010) 6474 7474Email: .automation@东北区沈阳辽宁省沈阳市沈河区北站路59号财富大厦E 座12-14层电话：(024) 8251 8111传真：(024) 2253 3626大连辽宁省大连市高新园区七贤岭广贤路117号电话：(0411) 8369 9760传真：(0411) 8360 9468鞍山辽宁省鞍山市铁东区高新区东区鞍千路452号电话：(0412) 558 1611传真：(0412) 555 9611长春吉林省长春市西安大路569号长春香格里拉大饭店401房间电话：(0431) 8898 1100传真：(0431) 8898 1087哈尔滨黑龙江省哈尔滨市南岗区红军街15号奥威斯发展大厦30层A 座电话：(0451) 5300 9933传真：(0451) 5300 9990华西区成都四川省成都市高新区拓新东街81号天府软件园C6栋1/2楼电话：(028) 6238 7888传真：(028) 6238 7000绵阳四川省绵阳市高新区火炬广场西街北段89号四川长虹大酒店四楼电话：(0816) 241 0142传真：(0816) 241 8950攀枝花四川省攀枝花市炳草岗新华街泰隆国际商务大厦B 座16层B2-2电话：(0812) 335 9500传真：(0812) 335 9718宜宾四川省宜宾市长江大道东段67号华荣酒店233室电话：(0831) 233 8078传真：(0831) 233 2680重庆重庆市渝中区邹容路68号大都会商厦18层1807-1811电话：(023) 6382 8919传真：(023) 6370 2886贵阳贵州省贵阳市新华72号路富中国际广场15楼C 区电话：(0851) 551 0310传真：(0851) 551 3932昆明云南昆明市北京路155号红塔大厦1204室电话：(0871) 315 8080传真：(0871) 315 8093西安陕西省西安市高新区科技路33号高新国际商务中心28层电话：(029) 8831 9898传真：(029) 8833 8818。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
K 302, S 302 K 302, S 302 K 302, S 302 K 302, S 302
K 402, S 402 K 402, S 402 K 402, S 402 K 402, S 402
K 513 K 513 K 513 K 513
K 613 K 613 K 613 K 613
K 713 K 713 K 713 K 713
K 813 K 813 K 813 K 813
and or Q @ @ G 2 @1) G 2 @1)
Q1 2 G2 3 G2 8
Q1 3 G2 7 G2 4
Q1 4 G2 3 G2 8
Side 1, eye side 4 Side 1, eye side 3 Side 5, eye side 4 Side 5, eye side 3
Torque bracket
Side 1, eye side 4 Side 1, eye side 3 Side 5, eye side 4 Side 5, eye side 3
Paint finish, cream white RAL 9001
Paint finish, reseda green RAL 6011
Paint finish, pebble gray RAL 7032
Paint finish, sky blue RAL 5015
Paint finish, light ivory RAL 1015
Description of options
Order code for option Gxx
Type of construction for
Mounting position for
Helical gear unit: • IM B3 / IM B5 / IM B14 / IM B34 / IM B35 • IM B7 • IM B8 • IM B6 • IM V1 • IM V3 / IM V6 / IM V19 • IM V5 • IM V18
Torque bracket
Side 1, eye side 4 Side 1, eye side 3 Side 5, eye side 4 Side 5, eye side 3
AC motors
Geared motors
1FK7 geared servomotors
Gear unit type and size K 102, S 102 K 102, S 102 K 102, S 102 K 102, S 102 K 102 K 102
G2 8 G2 4 G2 8 G2 4
Q7 2 G2 3 Q7 3 G2 7 Q7 4 G2 3 Q7 5 G2 7
G2 8 G2 4 G2 8 G2 4
Q8 2 G2 3 Q8 3 G2 7 Q8 4 G2 3 Q8 5 G2 7
G2 8 G2 4 G2 8 G2 4
1) Options Q12 to Q85 can be combined only with the following order codes: B.. or E.. with G23 or G24 or G27 or G28
1
• Hollow shaft with keyway,
• Hollow shaft with keyway,
3
insertion gearbox side 5
insertion gearbox side 4
• Hollow shaft with tensioning element,
• Hollow shaft with tensioning element,
Offset shaft, bevel and worm gearboxes:
• EL 1
H1
• EL 2
H2
• EL 3
H3
• EL 4
H4
• EL 5
H5
• EL 6
H6
–
H7
–
H8
3rd order code, 3rd position: Connector attachment position
7
insertion gearbox side 3
• Hollow shaft with tensioning element,
8
shrink disk, side 3,
insertion gearbox side 4
3rd order code, 1st and 2nd positions: Type of construction/mounting position
Paint finish, ash gray RAL 7000
Paint finish, white aluminum RAL 9006
Paint finish, gentian blue RAL 5010
Paint finish, pure orange RAL 2004
3
Food-grade gear oil (1FK7... - 5A.71 - 1...7 - Z)
Q4 2 G2 3 Q4 3 G2 7 Q4 4 G2 3 Q4 5 G2 7
G2 8 G2 4 G2 8 G2 4
Q5 2 G2 3 Q5 3 G2 7 Q5 4 G2 3 Q5 5 G2 7
G2 8 G2 4 G2 8 G2 4
Q6 2 G2 3 Q6 3 G2 7 Q6 4 G2 3 Q6 5 G2 7
1FK7 . . . - . 5A . 71 - 1 . . 5 - Z @ @ @ G @ @ H @ @
1st order code, Gear type
• Bevel gear unit K 102 to K 813
B
• Offset shaft gear unit F 202 to F 602
Torque bracket
Side 1, eye side 4 Side 1, eye side 3 Side 5, eye side 4 Side 5, eye side 3
Torque bracket
Side 1, eye side 4 Side 1, eye side 3 Side 5, eye side 4 Side 5, eye side 3
4
shrink disk, side 6,
shrink disk, side 4,
insertion gearbox side 5
insertion gearbox side 3
• Solid shaft with fitted key, gearbox side 3
5
• Hollow shaft with keyway,
2
4 5
G_D211_EN_00151
3
1
View of gear sides with location of torque counteracting support and position of mounting lug
Example: Bevel gear with hollow shaft. Torque counteracting support side 1 to mounting lug side 4
C
• Helical gear unit C 002 to C 812
D
• Worm gear unit S 002 to S 402
E
For complete order code for gear type, see selection and ordering data on pages 3/64 to 3/85
Q1 5 G2 7 G2 4
Q1 6 G2 3 G2 8
Q1 7 G2 7 G2 4
3
Q2 2 G2 3 Q2 3 G2 7 Q2 4 G2 3 Q2 5 G2 7
G2 8 G2 4 G2 8 G2 4
Q3 2 G2 3 Q3 3 G2 7 Q3 4 G2 3 Q3 5 G2 7
G2 8 G2 4 G2 8 G2 4
Siemens D 21.1 · 2006
3/87
AC motors
Geared motors
1FK7 geared servomotors
■ Selection and ordering data
5th order code, other options
Paint finish, matt black RAL 9005
• Connector position on gearbox side 2
1
• Connector position on gearbox side 4
2
• Connector position on gearbox side 1
3
• Connector position on gearbox side 3
2nd order code, 1st and 2nd positions: Type
• Foot-mounted
G1
• Tapped hole group
G2
3
• Flange (round) • Foot-mounted and flange (round)
G3 G5
• Foot-mounted and tapped hole group
Gear type
Permissible H options
Helical Offset Bevel shaft
Worm
Permissible H option for helical