MCR18, ver. 1, Dry heat storage
Norgren F18 18系列通用过滤器说明书
bar d psid
INLET PRESSURE: psig (bar g) 36 (2.5) 58 (4.0) 90 (6.3)
PORT SIZE: 2" 10 ELEMENT: 40 m 0.6
8
0.4 6
116 (8.0) 150 (10.0) 180 (12.5)
4
0.2 2
0
0
0
0
400
800
23.68 (602) **
Intermediate Body Bowl
Automatic Drain
For further information
1/4 Turn Manual Drain
15.70 (399)
PRESSURE DROP
Typical Performance Characteristics
Materials Body: aluminum Intermediate body: aluminum Bowl: aluminum Metal bowl liquid level indicator: transparent nylon Filter element: sintered bronze Elastomers: chloroprene, nitrile
Particle removal: 5 µm, or 40 µm filter element Manual drain connection: 1/8-27 and 1/8-28 female pipe thread.
Automatic drain connection: 1/8-27 and 1/8-28 male pipe thread. - Flexible tube with 3/16" (5mm) minimum I.D. can be connected to the automatic drain. Drain may fail to operate if the tube I.D. is less than 3/16" (5mm). Avoid restrictions in the tube.
MCR31, ver. 1, Scratch resist.
Scratch resistance – surfaceMCR311. Mandatory RequirementVerify the scratch resistance of the material or coating used for the outside surface of a product.2. Compliance criteriaAfter the exposure with the specified weight no visible scratches is accepted.For more information read M-MCR31.3. ScopeThe requirement applies to products with the following characteristics: Product surfaces that the customer is expected to clean according to the expected user pattern.4. IntroductionThe intention of this demand is to verify that the surface can resist touching, being operated, cleaned etc. without getting scratched.Abbreviations:MCR = Mechanical Climatic RobustnessRS = Release for Sale5. PurposeMake sure that the daily use of the product by the customer will not damage the surface.6. Variable parametersSeverity is depending on the classification of the surface.Severity:1. Applies to all surfaces witch will be observed under normal use, classified as zone 1 and2.2. Applies to all other surfaces, classified as zone 3, 4 and 5.7. TimingThe requirement must be verified before RS on samples that have to be processed according to the surface treatment process, which will be used for the running production.8. DocumentationThe test report shall contain all the information necessary to reproduce the test, and state the result of the test.For more information see Annex 1.9. Version historyVersion Released:CommentsInitials/Date1.1 TMJ/26.10.2006 New template, OR2.Annex 1 – test reportThe test report shall contain all the information necessary to reproduce the test.In particular, the following shall be recorded:−Date of verification.−Company and person responsible for the verification.−Identification of the device under test (DUT).In this case sample material, surface treatment and supplier shall be specified.−Identification of the test equipment, e.g. brand name, type number, serial number.−If equipment is calibrated.−Any effects on the DUT observed during or after the test.−Test set up (e.g. photo).−Measurement results, if any.−The rationale for the pass/fail decision。
MCR26说明书
TB.0466.005
技术说明书 综合保护测控装置 MCR26
.0
TB.0466.005
目 录
1 概述 .................................................................................................................................................. 5 1.1 适用范围 .................................................................................................................................... 5 1.2 装置特点 .................................................................................................................................... 7 1.3 保护功能 .................................................................................................................................... 7 1.4 控制功能 .................................................................................................................................... 8 1.5 监
最新：FDA批准的抗肿瘤药物及适应症总览2023
最新：FDA批准的抗肿瘤药物及适应症总览2023随着分子生物学的深入研究，肿瘤治疗的面貌正在逐步塑造出全新的形态。
在这个不断变革的时代里，抗肿瘤药物的研发和创新愈发引人注目。
从传统的化疗手段演进至靶向治疗、免疫疗法等新兴领域，我们见证了医学的巨大飞跃。
为了使医学专业人士、患者及其家属能够及时了解最新的抗肿瘤药物信息,我们特别整理了2023年度FDA批准的抗肿瘤药物及其适应症,将其呈现给大家。
这份汇总旨在为广大医疗从业者提供一份可靠的参考，让每一位医生都能在治疗患者时更具信心，让患者及其家属能够更清晰地了解可用的治疗选择。
让我们共同迎接肿瘤治疗领域的创新时代，为患者带来更多的曙光与希望。
在这个科技飞速发展的时代，抗肿瘤药物的不断涌现将为医学界探索更广阔的治疗领域打开新的大门。
012023.01.19药物：图卡替尼（TUkySa）+曲妥珠单抗适应症：用于治疗既往接受过氟l三D定、奥沙利粕和伊立替康为基础的化疗后疾病进展的RAS野生型、HER2阳性的不可切除或转移性结直肠癌。
2023.01.19药物：泽布替尼（Brukinsa）适应症用于治疗慢性淋巴细胞白血病（CLL或小淋巴细胞淋巴瘤（SLLX032023.01.26药物：帕博利珠单抗（Keytruda）适应症：用于IB期（T2a>4cmXII期或IIIA期非小细胞肺癌（NSCLC）切除和粕类化疗后的辅助治疗。
042023.01.27药物：口比托布鲁替尼（Jaypirca）适应症：用于治疗经过至少两线系统治疗（包括BTK抑制剂）的复发或难治性套细胞淋巴瘤（MCLi药物:Elacestrant(Orserdu)适应症：用于在至少一线内分泌治疗后疾病进展的患有ER阳性、HER2阴性、ESR1突变的晚期或转移性乳腺癌绝经后女性或成年男性。
062023.02.03药物：Sacituzumabgovitecan-hziy(Trodelvy)适应症：用于在转移性环境中接受过以内分泌为基础的治疗和至少两种系统治疗的不可切除的激素受体(HR)阳性、人表皮生长因子受体2(HER2)阴性(IHC0、IHC1+或IHC2+/ISH-)局部晚期或转移性乳腺癌患者。
Induction Hob 产品说明书
Series 8, Induction hob withintegrated ventilation system, 80 cm, surface mount with framePXX875D57EIncluded accessories1 x Slider for unducted recirculation, 1 x Clean Air Plus odor filter Optional accessoriesHEZ9ES100 Espresso maker 4 cups, HEZ9FE280 Iron pan Ø 18 / 28 cm, HEZ9FF010 Flex Pan, large, HEZ9FF030 Flex Pan set, 3 pcs., HEZ9FF040 Flex Pan set, 4 pcs., HEZ9SE030 Set of 2 pots and 1 pan, HEZ9SE040 4 pieces Set, HEZ9SE060 6 pieces Set, HEZ9TY010 Teppan Yaki, HEZ9VDKE1 Exhaust kit, HEZ9VDKR0 Recirculation kit 2 L-bow (70cm), HEZ9VDKR1 Recirculation kit S and L-bow (60cm), HEZ9VDKR2 Recirculation kit 1x L-bow, HEZ9VDSB1 90° flat duct bend horizontal, HEZ9VDSB2 90° flat duct L vertical, HEZ9VDSB3 90° flat duct M vertical, HEZ9VDSB4 90° flat duct S vertical,HEZ9VDSI0 Adapter round-flat, HEZ9VDSI1 90° Adapter round-flat, HEZ9VDSM1 Straight tube 500mm, HEZ9VDSM2 Straight tube1000mm, HEZ9VDSS1 Connector sleeve (female), HEZ9VDSS2 Flex sleeve (female), HEZ9VEDU0 Acoustics Filter, HEZ9VRCR0 cleanAir recirculation replenishment fil, HEZ9VRCR1 Clean Air Plus odor filter (replacement), HEZ9VRPD1 Plinth Diffusor The induction hob with integrated ventilation module: combines best induction with best ventilation technology for perfect results.• Integrated ventilation module: extract steam and cooking odours at the source.• DirectSelect Premium: spacious and intuitive touch interface.• FlexInduction: more flexibility on your hob for large pots and pans.• PerfectAir sensor: Automatic control of the hood settings for maximum extractor performance with minimal noise.• PerfectFry: no more worries about scorching.Technical DataAppliance type: .................................................Cooking zone ceramic Installation type: ......................................................................Built-in Heating type: ....................................................................Electric hob Min. required niche size for installation (HxWxD): ....223 x 750-750 x 490-490 mmWidth of the appliance: ..........................................................816 mm Dimensions: ........................................................223 x 816 x 527 mm Dimensions of the packed product (HxWxD): .....430 x 940 x 660 mm Net weight: ..............................................................................27.1 kg Gross weight: ..........................................................................33.5 kg Residual heat indicator: ........................................................Separate Location of control panel: ..........................................................Front Basic surface material: ..................................................Glass ceramic Color of surface: ................................................Black, Stainless steel Color of frame: .............................................................Stainless steel Length of electrical supply cord: ..........................................110.0 cm Sealed Burners: ..............................................................................No heating with booster: ......................................................................All Power of 2nd heating element (kW): ........................................3.3 kW Maximum output air extraction: ...........................................500 m³/h Boost position output recirculating: ..................................595.0 m³/h Maximum output recirculating air: ........................................499 m³/h Boost position air extraction: ...............................................622 m³/h Noise level: ..............................................................69 dB(A) re 1 pW Odour filter: ...................................................................................No Air circulation: ..................................................................Convertible Voltage: .................................................................220-240/380-415 V Frequency: ............................................................................50-60 Hz Length of electrical supply cord: ..........................................110.0 cm Min. required niche size for installation (HxWxD): ....223 x 750-750 x 490-490 mmDimensions: ........................................................223 x 816 x 527 mm Dimensions of the packed product (HxWxD): .....430 x 940 x 660 mm Net weight: ..............................................................................27.1 kg Gross weight: ..........................................................................33.5 kg Included accessories: 1 x Slider for unducted recirculation, 1 x Clean Air Plus odor filterDelay Shut off modes: ....................................................30R_12E minSeries 8, Induction hob withintegrated ventilation system, 80 cm, surface mount with framePXX875D57EThe induction hob with integrated ventilation module: combines best induction with best ventilation technology for perfect results.- 80 cm: space for 4 pots or pans.Flexibility of cooking zones- 2 Flex zones: use cookware of any shape or size anywhere within the 40cm long zone.- Cooking zone front left: 200 mm, 240 mm, 2.2 KW (max. power 3.7 KW)- Cooking zone rear left: 200 mm, 240 mm, 2.2 KW (max. power 3.7 KW)- Cooking zone rear right: 200 mm, 240 mm , 2.2 KW (max power 3.7 KW)- Cooking zone front right: 200 mm, 240 mm, 2.2 KW (max. power 3.7 KW)Usage convenience- DirectSelect Premium touch control: directly control the power on the extra large illuminated touch bar (invisible when switched off). - Variable 17-stage power settings for each zone: precisely adapt the heat with 17 power levels (9 main levels and 8 intermediate levels).- Keep warm function: Keep Warm Function: keep dishes warm at preset low power level.- Timer for all zones- : switches off the cooking zone at the end of the time set (e.g. for boiled eggs).- Timer - shows how long the cooktop is in use- : an alarm sounds at the end of the time set (e.g. for pasta).- Count up timer per cooktop- : shows how much time has passed since starting the timer (e.g. for potatoes).Time saving & efficiency- PowerBoost function for all zones- : boil water faster thanks to 50% more energy than at the highest standard level.- PanBoost: heat up pans faster than at the highest standard level while protecting the pan coating.- Cooking zones will be automatically joined or separated based on the shape and size of the cookware placed.- MoveMode (3 levels): increase or decrease the power level simply by moving the pot forwards or backwards.- Automatic setting transfer: when moving a pot to a different cooking zone, this feature transfers all previous settings to the new zone at the touch of a button.- QuickStart function: when switching on, the hob automatically selects the cooking zone with cookware (when placed on a zone whilst the hob is off).- ReStart function: in case of unintentional switch-off, this feature restores all previous settings by switching on the hob again within 4 seconds.Cooking assistance- PerfectFry sensor with 5 temperature settings: prevents overcooking with the automatic temperature regulation of the integrated sensor.Connectivity- Home Connect enabled: check if the hob is switched off even when not at home, and find recipes or additional functions in the Home Connect app.Design- Profile trim (front facette with side trim)Safety- 2 stage residual heat indicator for each zone: indicates which cooking zones are still hot or warm.- Control panel lock: prevent unintended activation of the hob.- Freeze function: wipe overboiled liquids without unintentionally changing settings (blocking all touch buttons for 30 seconds).- Main on/off switch: switch off all cooking zones at the touch of a button.- Automatic safety shut off: for safety reasons, heating stops after a preset time if not used (possible to customise).- Energy consumption display: shows the electricity consumption of the last cooking process.Installation- Dimensions of the product (HxWxD mm): 223 x 816 x 527- Required niche size for installation (HxWxD mm) : 223 x 750 x (490 - 490)- Min. worktop thickness: 16 mm- Connected load: 7.4 KW- Power management options for 16A, 13A or 10A connection: limit the maximum power if needed (depends on fuse protection of electric installation).- Suitable for installation into a 60 cm base cabinetIntegrated ventilation downdraft system- Induction cooktop with fully integrated high-performance downdraft extractor.- Suitable for ducted or recirculated extraction configuration (incl. differentiated software modes). Installation accessories for unducted recirculation, among these four cleanAir odor filters and a telescopic slider element, are included in the cooktop. Accessories for other installation options are available, details in the planning notes.-- Aesthetically integrated fully flush air intake design with floating, heat resistant glass ceramics element for free movement and placement of cookware.- Ventilation system with 17 electronically controlled fan power levels and 2 Boost-/Intensive fan power levels (with automatic revert) via DirectSelect Premium touch control user interface. Sensor-based, smart, fully automatic mode of ventilation system: - - Automatic switch-on of ventilation system when a cooking zone is used.- - Sensor-based and cooktop-based, fully-automatic adjustment of power levels via advanced algorithm for maximum convenience.- - 3 possible sensitivity modes of algorithm for maximum convenience (Low-noise oriented, balanced,performance-oriented).- - Automatic delayed shut-off after cooking to erase residual odors after cooking (in specific ultra low-noise fan level, 12min in ducted extraction, 30min in recirculated extraction, can be shut-offmanually).- - Manual control possible via DirectSelect Premium touch control. - High-performance, low-noise blower with energy-effcienctBLDC-technology. High extraction rates at very low noises with pleasant noise frequencies through psycho-acoustically and aerodynamically optimized interieur with enclosed, non-visible blower. Highly pressuredrop resistant even with longer and more complex ductings.- Easy-to-detach and easy-to-clean grease filter and liquid collector unit:- - Convenient one-hand removal of unit via floating glass ceramics handle.- - Integrated, large-scale, high performance stainless-steel grease filters with 12 filtration layers and one black top layer for enhanced aesthetical integration. Grease filtration efficiency of 94 %.- - All parts of the unit are easy-to-clean, fully dishwasher safe and heat resistant.- - (Upper) Liquid collector unit with 200ml of capacity for standard accidental spillages or cooking condensate.- - Powerful drainage system for spillages that exceed 200ml of liquids.- - Liquid safety collector with additional capacity of 700ml for more severe accidental situations. Dishwasher safe. Easily accessible and detachable from below.- - Overall capturing capacity of 900ml (200ml + 700ml).- - Watertight blower system.- Ventilation system performance:- - Extraction performance in ducted extraction (according to EN 61591): min. normal setting 154 m3/h , max. normal setting 500m3/h , max. Boost-/Intensive setting 622 m3/h .- - Extraction performance in recirculated extraction (according to EN 61591): min. normal setting 132 m3/h , max. normal setting 499m3/h , max. Boost-/Intensive setting 595 m3/h.- - Noise level in ducted extraction (Sound power level according to EN 60704-3): min. normal setting 42 dB re 1 pW, max. normal setting 69 dB re 1 pW, max. Boost-/Intensive setting 74 dB re 1 pW.- - Noise level in recirculated extraction (Sound power level according to EN 60704-3. ): min. normal setting 41 dB re 1 pW, max. normal setting 68 dB re 1 pW, max. Boost-/Intensive setting 72 dB re 1 pW.- - Grease filter efficiency (according to EN 61591) 94 %.- Consumption data and energy efficiency (according to Regulation (EU) No 65/2014):- - Energy Efficiency Class: B (at a range of energy efficiency classes from A+++ to D).- - Fluid Dynamic Efficiency: A .- - Average energy consumption: 57 .- - Grease filtration effciency class: B .- - Noise min. normal setting & max. normal setting: 42 dB & 69 dB . - For recirculation configuration: 2 x 2 battery of directly integrated, high-performance cleanAir odor filters.- - Optimised odour reduction performance for cooking applications with complex odour molecules (e.g. fish).- - Large scale filter surface with high odour reduction capabilities.- - Lifetime of 360 hours of cooking (non-regenerative).- - Low-noise filters with optimised psycho-acoustics.- - Easy-to-access and easy-to-remove from above.- - Saturation indications for cleanAir odour filter via user interface notification and via the Home Connect app with a convenientreplenishment re-order option (replenishment cleanAir filter set HEZ9VRCR0).- For ducted extraction configuration: 2 x 2 sets of directly integrated, high-performance low-noise acoustic filters for significantly lower noise and improved psycho-acoustics.Planning & installation notes- Suitable for ducted or recirculated extraction installations in 4 different options (unducted, partly and fully ducted recirculation or ducted extraction). Installation accessories for unducted recirculation, among these four cleanAir odor filters and a telescopic slider element, are included in the cooktop. The included accessories allow easy and quick installations and can be planned in all worktop depths ≥60cm. For other types of installation, one of the following accessory kits is recommended:- HEZ9VDKR1 for partly-ducted recirculation in worktops of ≥60cm depth with max. worktop height of 960 mm. HEZ9VDKR0 forpartly-ducted recirculation in worktops of ≥70cm depth with max. worktop height of 960 mm.- HEZ9VDKE1 as starter kit for ducted extraction in worktops of≥60cm depth.- To complete the fully ducted extraction or to do any other individual recirculation planning different ducting accessories are available.- Planning suggestions:- - Installation is possible in island as well as wall oriented configurations.- The product and its accessories comply with the Needle Flame Test (according to IEC 60695-11-5) and the V2 flammability class (according to UL94).- - The max. immersion depth is 223 mm below worktop surface.- - The appliance must be freely accessible from below (i.e. for accessing the lower liquid safety collector).- - No false floor is necessary below the cooktop with integrated downdraft ventilation system. The drawers and/or shelves in the floor unit must be removable. The backpanel of the floor unit can be kept - only a cut-out for the air outlet is needed (position and size can be taken from the installation instructions).- An installation with unducted recirculation requires a vertical aperture of min. 25mm behind the backpanel of the furniture. Suggested for ideal performance are 50mm.- The minimum worktop thickness is 16 mm for top mounted and flush installed appliances with the standard installation system. Installation in even thinner worktops is also possible with the spare part: content 626792.- - The overall appliance weight is 26kg - the bearing capacity and stability, in the case of very thin worktops in particular, must be supported using suitable substructures. The overall appliance weight and the worktop manufacturer's structural integrity specifications are to be taken into account.- - For partly ducted and unducted recirculation extraction installations, a return-flow aperture of ≥400cm² is to be respected in the plinth area. The aperture can be realized via outlet grids, lamella grids or subtly shortened plinths depending on the assortment of the kitchen furniture manufacturer.- - The air outlet on the backside of the appliance can directly be accessed with a male flat duct element (DN 150).- - The pressuredrop resistant blower allows longer and more complex ductings up to 8m with three 90° bows while keeping sufficient performance.- - When installing a ventilation hood with ducted extraction and a chimney-vented fireplace, the power supply line of the appliance needs a suitable safety switch. This is not required for configurations in recirculated extraction.- - In ducted extraction configuration a one-way flap (or backflow trap) with a maximum opening pressure of 65Pa should beinstalled.Series 8, Induction hob with integrated ventilation system, 80 cm, surface mount with framePXX875D57E。
STEP-7 GP-9 Run@Rate按预定节拍生产
0
0.00%
2
0
0
0
0.00%
0
0.00%
3
0
0
0
0.00%
0
0.00%
4
0
0
0
0.00%
0
0.00%
5
0
0
0
0.00%
0
0.00%
6
0
0
0
0.00%
0
0.00%
7
0
0
0
0.00%
0
0.00%
8
0
0
0
0.00%
0
0.00%
9
0
0
0
0.00%
0
0.00%
10
0
0
0
0.00%
0
0.00%
11
0
0
0
0.00%
QTC
最大产 能节拍
MCR
实际工 装能力
不通过
实际工 装能力
待定
实际工 装能力
通过
GP-9 Run&Rate 按预定节拍生产
SGMW SQE
Ver.1
实际工 装能力 过剩
Page 17
供应商名称： 工厂名称：
供应商信息调查
SGMW 项目名称/年度： SGMW 产品名称：
填写日期：
主要顾客信息（包括已批量供货和在未来6个月内即将批量供货的供应商）：
SC6370/ 1
1998。2
300000
安全带总成(三点 式紧急锁止)
2
2 重庆长安
SC6370/ 计划2005-9-1SOP 1
迪伦电器产品说明书
15heating elements for pizza presses ......106heating elements for rechauds ..............106heating elements for rolling grills ........107heating elements for chargrills ..............107heating elements for salamanders/toasters ...........................................................109heating elements for plate warmers ...118heating elements for transportcontainers ......................................................118heating elements for heating bridges 118heating elements for heated cabinets 119heating elements for heated trolleys ..119heating elements for saladettes ............120dry heating elements fordishwashers ..................................................120bottom heaters ............................................121heaters ............................................................121heating cables ..............................................122heating cartridges ......................................123heating plates ..............................................124heater battery ...............................................1251heating elements for ovens ......................17heating elements for bain maries ..........26heating elements for frying pans ...........36heating elements for crepes makers .....37heating elements for chip scuttles ........37heating elements for fryers ......................37heating elements for griddles .................56heating elements for large hobs ............63heating elements for gyros grills ............64heating elements for chickenrotisseries ........................................................64heating elements for hot counters ........65heating elements for hot dogmachines .........................................................67heating elements for coffee machine ..67heating elements for refrigeration ........82heating elements for tilting bratt pan ..86heating elements for contact grills ........91heating elements for microwaves .........95heating elements for pasta cookers ......95heating elements for pizza ovens ..........99heating elements16heating rods ...................................................125induction coils ...............................................126ceramic heaters .............................................126contact heaters .............................................127pilot heating elements ...............................127quartz heating elements ...........................128grooved tubular heating elements .......130coil heating elements .................................131immersion heating elements ...................132heating elements for convection ...........166radiation heaters ..........................................186flow heaters ....................................................187foil heating elements ..................................188accessories ......................................................1901heating elementsheating elements for ovens suitable for heating elementsheating elements for ovens suitable forheating elements for ovens suitable forheating elements for ovens suitable forheating elements for ovens suitable forheating elements for ovens suitable forheating elements for ovens suitable forheating elements for ovens suitable forheating elements for ovens suitable forelements forbain maries suitable forheating elements for bain maries suitableforelements for bain maries suitableheating elements for bain maries suitable 1011elements for bain maries suitable for1011121314heating elements for bain maries suitableelements for bain maries suitable forheating elements for bain maries suitableforelements for bain maries suitableheating elements for bain maries suitableelements for frying pans suitable forheating elements for chip scuttles/heatingheating elements for fryers suitable forheating elements for fryers suitable forheating elements for fryers suitable forheating elements for fryers suitable forheating elements for fryers suitable forheating elements for fryers suitable forheating elements for fryers suitable for10heating elements for fryers suitable for/heating elements for griddles suitable forheating elements for griddles suitable forheating elements for griddles suitable forheating elements for griddles suitable forheating elements for griddles suitable forheating elements for griddles suitable forheating elements for griddles suitable forheating elements for large hobs suitablefor chicken rotisseries suitable for。
基站设备常见告警排查方法
时,功放的特性表现是不同的,因为当从峰值向下变化时,晶体沟道
的温度更高。对CDMA信号来说,这将导致对后继一个或多个数据码 片的冲击,意味着数量可观的交调产物和矢量误差EVM。所以前面提 到的，当出现超温时，也会产生告警。
2、功率的影响：
现网运行的开环和闭环供控的结构由MCR、功放、滤波器、板件间
查看完毕后一定要关闭debug退出，方法如下： MCR2-1-> rssiLogCarrier(2,0) MCR2-1-> rssiLog
2：9916基站近端查看RSSI方法
第一步：登陆到基站 将电脑IP设置为192.168.168.250 用网线连接9916基站维护端口 在运行窗口输：telnet 192.168.168.16 连接到基站 第二步：登陆查询底噪（红色字母是需要输入的） 在Login后输: lucent 在Password后输: password
小结
•就目前提取的话务数据分析而言，该告警对指标并无明显的影 响。但板件的非线性畸变较为严重的话，是会影响到通话质量 的。故在障碍排查中要根据ROP日志的提示，分清排障的先后顺 序。 •随着我们障碍修复经验的积累，此类告警的数量是可控的。但 是无法彻底消除的，原因有（工程影响、更换板件、板件和联 接线老化或接口松动等），我们只能通过告警及时的对其进行 跟踪和排查。 •环境监控系统可以对机房超温进行及时的跟踪，在板件出故障 前即发现，有利于我们日常的障碍维护工作。
MCR1-1-> rssiLogCarrier 1,1,3,3,20
打开rssi开关 扇区号
3代表查 看主分集
载频号，37频点为1,78频点为2,283频点为3
查看完毕后一定要关闭debug退出，方法如下：
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Dry heat – product storage
MCR18
1. Mandatory Requirement
Verify that the product can survive being stored at dry heat conditions.
2. Compliance criteria
After being exposed at +55°C for 96 hrs, no functional failures shall be found.
For more information read M-MCR18.
3. Scope
The requirement applies to products with the following characteristics: All products containing electronics.
4. Introduction
The intention of this demand is to make sure that the product can survive being stored at dry heat conditions, during transport to the dealer or customer.
Abbreviations:
MCR = Mechanical Climatic Robustness
RS = Release for Sale
5. Purpose
Verify that dealer and customer will not receive a product, being damaged after being stored at dry heat conditions during transport.
6. Variable parameters
Not applicable.
7. Timing
The requirement must be verified before RS on an appliance equivalent to saleable appliance.
8. Documentation
The test report shall contain all the information necessary to reproduce the test, and state the result of the test.
For more information see Annex 1.
9. Version history
Version Released:
Comments
Initials/Date
1.1 TMJ/11.10.2006 New template, KV
2.
Annex 1 – test report
The test report shall contain all the information necessary to reproduce the test.
In particular, the following shall be recorded:
−Date of verification.
−Company and person responsible for the verification.
−Identification of the device under test (DUT) and any associated equipment, e.g. product type, serial number.
−Identification of the test equipment, e.g. brand name, type number, serial number.
−If equipment is calibrated.
−Any effects on the DUT observed during or after the test.
−Test set up (e.g. photo).
−Measurement results, if any.
−The rationale for the pass/fail decision。