HX8347-D液晶屏_T_AN_preliminary_v01_090525
清华同方流水号编码原则7
1.0 清华同方显示器产品序号编排方式
1.1 产品序号(共15码)：
厂家代码显示器分类型号代码年周序号流水号
AB C DEF G HI JJJJJJ
1.2 第AB码：厂家代码
WG：唯冠DY：大宇XH：厦华GJ：冠捷LG：LG
1.3 第C码：显示分类
1：15” CRT 2：17” CRT 3：15” LCD 4：17” LCD
1.4 第DEF码：型号代码
1.4.1 第D码：显示器特征
0：普通显示器1：高亮显示器2：高分显示器3：钻石珑管显示器
1.4.2 第E码：同类显示器版本区分位，以A、B、C顺推
1.4.3 第F码：颜色区分码
A：家用天蓝色 B：商用灰白色 C：家用冷灰色 D：家用藏蓝色
E：商用灰黑色 F：家用纯白 D：商用银黑色H:家用闪光银
I:家用珍珠白
1.5 第G码：年份码(显示器出厂日期年份)
3：2003
1.6 第HI码：周(显示器出厂日期的周数，由制造部作业时资询业管部,由业管提供)
1.7 第J码：序号流水号从000001~999999
注：编码体现方式：采用128Auto码制制作条形码。
hx8279芯片规格书
hx8279芯片规格书hx8279芯片是一款高性能的显示驱动芯片，广泛应用于液晶显示面板的驱动。
以下是hx8279芯片的规格书：一、概述hx8279芯片是一款用于驱动液晶显示面板的芯片，具有高集成度、低功耗、高性能等特点。
它采用先进的CMOS工艺制造，可驱动多种类型的液晶显示面板，如TN、HTN、STN等。
hx8279芯片支持多种显示模式，包括并行和串行模式，可以满足各种不同应用场景的需求。
二、主要特性1、高性能：hx8279芯片采用高性能的CMOS工艺制造，具有快速的响应速度和较低的功耗。
它可以实现高清晰度的图像显示，支持高分辨率的显示面板。
2、多模式支持：hx8279芯片支持并行和串行模式，可以与不同类型的液晶显示面板配合使用。
此外，它还支持多种数据接口，如8位、16位、24位等，可以方便地与各种控制器连接。
3、自动调整：hx8279芯片具有自动调整功能，可以根据液晶显示面板的特性和环境温度等因素自动调整各项参数，以保证显示的稳定性和清晰度。
4、多种显示模式：hx8279芯片支持多种显示模式，如常规模式、横屏模式、纵屏模式等，可以满足不同应用场景的需求。
5、低功耗：hx8279芯片采用低功耗设计，可以有效降低液晶显示设备的功耗，延长设备的续航时间。
三、规格参数1、工作电压：3.3V~5V2、功耗：≤100mW3、显示模式：并行或串行4、数据接口：8位、16位、24位5、调整方式：自动调整6、显示分辨率：根据实际需求而定7、工作温度：0℃~70℃8、存储温度：-20℃~85℃四、应用领域hx8279芯片广泛应用于液晶显示设备中，如手持设备、车载设备、工业控制设备等。
它可以驱动各种类型的液晶显示面板，实现高清晰度的图像显示，提升用户的视觉体验。
HX8695-B02_DS_preliminary_v01
Himax Confidential
This information contained herein is the exclusive property of Himax and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Himax.
September, 2009
1. General Description
The HX8695-B02 is an 800-channel outputs gate driver, which is used for driving the gate line of TFT LCD panel. It is designed for 2-level output with 40V LCD driving voltage range.
Output channel Disable channel MODE2 MODE1 800 H H 720 361~440 H L 768 385~416 L X
STV1 STV2
Start pulse I/O input/output pin
OE
Output enable In control
/XAO
VDD VSS VGH VEE PATH1 PATH2
In In In In
Power supply Power supply Power supply Power supply
In Internal link
Himax Confidential
This information contained herein is the exclusive property of Himax and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Himax.
部分电视机CPU型号及简单代换
部分电视机CPU型号及简单代换部分电视机CPU型号及简单代换8879CPBNG6V38 海信CPU8873CPBNG6U73 创维CPUTOSHIBA-HAY-22、8873CSCNG6PR6 通用CPUTDA9373PS/N2/AI1115 SVA CPU13-TB73-TM1V001、LC863332A-5T25、LC863332A-5S97 夏华CPU88CS38N-3P48、TMP88PS38 夏华K2918、K2926，解码TB1251TDA9381PS/N3/2/1741 索尼CPUTDA9381PS/N2/3I0837 LG CPUTDA9381PS/N2/3I0975 三星CPUTDA9373PS/N2/AI0939（Haier9373-V2.0）Haier9373-V1.0 海尔CPU V1.0的可以换空白存储器，按遥控器数字8、V+ 进总线LC863324B-54M2、LC863324A-5W21、LC863324C-55M5 海信CPUOM8370-A-3NC、NOM8370-A-1NC 海信、西湖、夏华、彩星CP-2156TCL-M18V3PNICAN、TCL-M11V1P 王牌CPUH13V02-T0、8829CSNG5CJ2、H13V01-T0 TCL CPUTDA9370PS/N2/AI1429（4706-D93705-64）3P36、4P36 创维CPU 4706-D83702-64CH05T1501 长虹CHD2590M37210M3-551SP日立25M8C CPUTDA9373PS/N2/AI0911（A01V01-PH）TDA9373PS/N2/AI0996 TCL 2990UHD0401、S3F880AXZZ 创维（3S30/5S30/5S31）MN152811TJS 松下CPU 85元LC863524C-55L7、53P4、52Y7、TH-50J2 杂牌CPULC863524C-55L6、55Y5、55K8 杂牌CPU87CK38N-3647（TMP87CK38N-3675、1C48）澳柯玛、松王M37221M6-309S 厦华R2920 CPUTDA9380PS/N1/IS0380（TCL-UOC-V01）王牌CPU，用TDA9383PS代替要把60脚接地13-T00S23-03M01、8879CSBNG6K02 乐华25G6BCH08T2602（8873CSANG6JH8）长虹CPUOM8373PS/N3/2/1870（4706-D83732-64）创维短管机专用CPULC863328A-51J8 嘉华CPU8803CPAN-3PE8（8823CPNG4JR6）换存储器、39脚，C205换1UF，ST6378B1/FKF 4S02-3008 创维数码3008TMP47C434N-3526 通用王牌TCL M14VBC 王牌CPUST6367BB1/BFX 不详LC863324A-5N09 海信CPULC864512V-5C77 海信CPUM34300N4-565SPKY88C94 夏华CPUM34300N4-555SP 日立CPULC863328A-5S15 高路华、海信CPUMC8902A-5Y83 熊猫、高路华CPUMC8904A-5Z25 熊猫、高路华、海信、西湖CPUM37210M3-807SP 康力CPUT-P-16 8823CPNG5RH6 熊猫CPU SAA5647HL/M1 飞利蒲CPUOM8373PS/N3/A/1914（OM8373PS/N3/A/1854）康佳短管CPUTMP47C634AN RC18 厦华CPUHAIER1132S、HAIER1532S 海尔21T8D-S、21F9G-Shisense 8803-1（8803CPBNG3VG6）8823CPNG3PE8 海信TC2111A 换存储器、39脚，C205换1UF，OM8370PS/N3/1（HZ10V01）（TOUL 12-02M00）TCL CPUHAIER8829-V2.0（8829CPNG4PG3）海尔CPUCH0504、CH0503 长虹CPUM34302M8-612SP SONY CPUCH04T1306 长虹CPUNOM8370-A-11B 西湖CPUTCL-T00Y12-02M01（LA76931）、TOOY12-01M01 TCL CPUCKP1302S1（8829CPNG6FP6）CKP1302S 康佳CPUP88P8432N、S3C8849X13-AQB7 嘉华CPU OM8373-B-3NC 海信TF2507FLC863328C-55N6、5T45 康佳CPUTDA9373PS/N2/AI0889、4706-D93731-64 5P30 创维CPULC863328B-53P5、LC863328C-56M9、LC863328B-52E4、50J1 SVA CPUR2J10160G8-A12FP、R2J1016008-A06FP 数源S21A07 等13-TOOS13-08M01、8873CSBNG6N15 TCL CPU8873CPANG6HV9 数源TJ21A23 CPU87CM38N-1K45、87CM38N-1U87 夏华XT-259ATAVC139 三洋CPULC863320A-5N94、LC863320A-5N17（3Y01）创维CPUCH05T1604（TDA9370PS/N2/AI0848）长虹超级芯片CH05T1607（TDA9370PS/N2/AI1092）TDA9370PS 长虹超级芯片CH05T1606（TDA9373PS/N2/AI1087）TDA9373PS 长虹超级芯片CH05T1630、OM8373PS/N3/A/1842（CH05T1621）长虹，按键功能错乱，伴音失控。
Motorola 3.5 kHz 产品说明书
RVN4126 3.59100-386-9100-386/T DEVICERVN41772-CD2-3.5MCS/MTSRVN41821-CD2-3.5XTS3000/SABER PORTABLE YES RKN4046KHVN9085 3.51-20 R NO HLN9359 PROG. STAND RVN4057 3.532 X 8 CODEPLUG NO3080385B23 & 5880385B30 MDVN4965 3.59100-WS/T CONFIG KITRVN4053 3.5ASTRO DIGITAL INTERFACE NO3080385B23RVN41842-CD RKN4046A (Portable) 2-3.5ASTRO PORTABLE /MOBILE YES3080369B73 or0180300B10 (Mobile) RVN41831-CD3080369B732-3.5ASTRO SPECTRA MOBILE YES(Low / Mid Power)0180300B10 (High Power) RVN4185CD ASTRO SPECTRA PLUS MOBILE NO MANY OPTIONS; SEESERVICE BRIEF#SB-MO-0101RVN4186CD ASTRO SPECTRA PLUS MANY OPTIONS;MOBILE/PORTABLE COMB SEE SERVICE BRIEF#SB-MO-0101RVN4154 3.5ASTROTAC 3000 COMPAR.3080385B23RVN5003 3.5ASTROTAC COMPARATORS NO3080399E31 Adpt.5880385B34RVN4083 3.5BSC II NO FKN5836ARVN4171 3.5C200RVN4029 3.5CENTRACOM SERIES II NO VARIOUS-SEE MANUAL6881121E49RVN4112 3.5COMMAND PLUS NORVN4149 3.5COMTEGRA YES3082056X02HVN6053CD CT250, 450, 450LS YES AAPMKN4004RVN4079 3.5DESKTRAC CONVENTIONAL YES3080070N01RVN4093 3.5DESKTRAC TRUNKED YES3080070N01RVN4091 3.5DGT 9000 DESKSET YES0180358A22RVN4114 3.5GLOBAL POSITIONING SYS.NO RKN4021AHVN8177 3.5GM/GR300/GR500/GR400M10/M120/130YES3080070N01RVN4159 3.5GP60 SERIES YES PMLN4074AHVN9128 3.5GP300 & GP350RVN4152 3.5GP350 AVSRVN4150 3.5GTX YES HKN9857 (Portable)3080070N01(Mobile) HVN9025CD HT CDM/MTX/EX SERIES YES AARKN4083/AARKN4081RiblessAARKN4075RIBLESS NON-USA RKN4074RVN4098H 3.5HT1000/JT1000-VISAR YES3080371E46(VISAR CONV)RVN4151 3.5HT1000 AVSRVN4098 3.5HT1000/ VISAR CONV’L.YES RKN4035B (HT1000) HVN9084 3.5i750YES HLN-9102ARVN4156 3.5LCS/LTS 2000YES HKN9857(Portable)3080070N01(Mobile) RVN4087 3.5LORAN C LOC. RECV’R.NO RKN4021ARVN4135 3.5M100/M200,M110,M400,R100 includesHVN9173,9177,9646,9774YES3080070N01RVN4023 3.5MARATRAC YES3080070N01RVN4019 3.5MAXTRAC CONVENTIONAL YES3080070N01RVN4139 3.5MAXTRAC LS YES3080070N01RVN4043 3.5MAXTRAC TRK DUPLEX YES3080070N01RVN4178CD MC SERIES, MC2000/2500DDN6124AW/DB25 CONNECTORDDN6367AW/DB9 CONNECTOR RVN41751-CD Rib to MIC connector 1-3.5MCS2000 RKN4062BRVN41131-3.5MCS2000RVN4011 3.5MCX1000YES3000056M01RVN4063 3.5MCX1000 MARINE YES3000056M01RVN4117 3.5MDC/RDLAP DEVICESRVN4105 3.5MOBILE PROG. TOOLRVN4119 3.5MOBITEX DEVICESRVN4128 3.5MPT1327-1200 SERIES YES SEE MANUALRVN4025 3.5MSF5000/PURC/ANALOG YES0180355A30RVN4077 3.5MSF5000/10000FLD YES0180355A30RVN4017K 3.5MT 1000YES RTK4205CRVN4148 3.5MTR 2000YES3082056X02RVN4140 3.5MTRI 2000NORVN41761-CD MTS2000, MT2000*, MTX8000, MTX90001-3.5*programmed by DOS which is included in the RVN4176RVN4131 3.5MTVA CODE PLUG FIXRVN4142 3.5MTVA DOCTOR YES3080070N01RVN4131 3.5MTVA3.EXERVN4013 3.5MTX800 & MTX800S YES RTK4205CRVN4097 1-CD MTX8000/MTX9000,MTS2000,MT2000*,* programmed by DOS which is included in the RVN4176HVN9067CD MTX850/MTX8250MTX950,MTX925RVN4138 3.5MTX-LS YES RKN4035DRVN4035 3.5MX 1000YES RTK4203CRVN4073 3.5MX 800YES RKN4006BHVN9395 P100, P200 LB, P50+, P210, P500, PR3000RVN4134 3.5P100 (HVN9175)P200 LB (HVN9794)P50+ (HVN9395)P210 (HVN9763)P500 (HVN9941)PR3000 (HVN9586)YES RTK4205HVN9852 3.5P110YES HKN9755A/REX1143 HVN9262 3.5P200 UHF/VHF YES RTK4205RVN4129 3.5PDT220YVN4051 3.5PORTABLE REPEATER Portable rptr.P1820/P1821AXRVN4061C 3.5PP 1000/500NO3080385B23 & 5880385B30 RVN5002 3.5QUANTAR/QUANTRO NO3O80369E31RVN4135 3.5R100 (HVN9177)M100/M200/M110/M400YES0180358A52RVN4146 3.5RPM500/660RVN4002 3.5SABER YES RTK4203CRVN4131 3.5SETTLET.EXEHVN9007 3.5SM50 & SM120YESRVN4039 3.5SMART STATUS YES FKN5825AHVN9054 3.5SOFTWARE R03.2 P1225YES3080070N01HVN9001 3.5SOFTWARE R05.00.00 1225LS YES HLN9359AHVN9012 3.5SP50RVN4001N 3.5SPECTRA YES3080369B73 (STANDARD)0180300B10 (HIGH POWER) RVN4099 3.5SPECTRA RAILROAD YES3080369B73RVN4110 3.5STATION ACCESS MODULE NO3080369E31RVN4089A 3.5STX TRANSIT YES0180357A54RVN4051 3.5SYSTEMS SABER YES RTK4203BRVN4075 3.5T5600/T5620 SERIES NO3080385B23HVN9060CD TC3000, TS3000, TR3000RVN4123 3.5VISAR PRIVACY PLUS YES3080371E46FVN4333 3.5VRM 100 TOOLBOX FKN4486A CABLE &ADAPTORRVN4133 3.5VRM 500/600/650/850NORVN4181CD XTS 2500/5000 PORTABLES RKN4105A/RKN4106A RVN41002- 3.5XTS3000 ASTRO PORTABLE/MOBILERVN4170 3.5XTS3500YES RKN4035DRIB SET UPRLN4008E RADIO INTERFACE BOX (RIB)0180357A57RIB AC POWER PACK 120V0180358A56RIB AC POWER PACK 220V3080369B71IBM TO RIB CABLE (25 PIN) (USE WITH XT & PS2)3080369B72IBM TO RIB CABLE (9 PIN)RLN443825 PIN (F) TO 9 PIN (M) ADAPTOR (USE W/3080369B72 FOR AT APPLICATION) 5880385B308 PIN MODULAR TO 25 PIN ”D” ADAPTOR (FOR T5600 ONLY)0180359A29DUPLEX ADAPTOR (MOSTAR/TRAXAR TRNK’D ONLY)Item Disk Radio RIB Cable Number Size Product Required Number Item Disk Radio RIB Cable Number Size Product Required NumberUtilizing your personal computer, Radio Service Software (RSS)/Customer Programming Software (CPS)/CustomerConfiguration Software (CCS) enables you to add or reprogram features/parameters as your requirements change. RSS/CPS/CCS is compatible with IBM XT, AT, PS/2 models 30, 50, 60 and 80.Requires 640K RAM. DOS 3.1 or later. Consult the RSS users guide for the computer configuration and DOS requirements. (ForHT1000, MT/MTS2000, MTX838/8000/9000, Visar and some newer products —IBM model 386, 4 MEG RAM and DOS 5.0 or higher are recommended.) A Radio Interface Box (RIB) may be required as well as the appropriate cables. The RIB and cables must be ordered separately.Licensing:A license is required before a software (RVN) order is placed. The software license is site specific (customer number and ultimate destination tag). All sites/locations must purchase their own software.Be sure to place subsequent orders using the original customer number and ship-to-tag or other licensed sites; ordering software without a licensed customer number and ultimate tag may result in unnecessary delays. To obtain a no charge license agreement kit, order RPX4719. To place an order in the U.S. call 1-800-422-4210. Outside the U.S., FAX 847-576-3023.Subscription Program:The purchase of Radio ServiceSoftware/Customer Programming/Customer ConfigurationSoftware (RVN & HVN kits) entitles the buyer/subscriber to three years of free upgrades. At the end of these three years, the sub-scriber must purchase the same Radio Service Software kit to receive an additional three years of free upgrades. If the sub-scriber does not elect to purchase the same Radio Service Software kit, no upgrades will be sent. Annually a subscription status report is mailed to inform subscribers of the RSS/CPS/CCS items on our database and their expiration dates.Notes:1)A subscription service is offered on “RVN”-Radio Service Software/Customer Programming/Customer Configuration Software kits only.2)“RVN” software must only be procured through Radio Products and Services Division (RPSD). Software not procured through the RPSD will not be recorded on the subscription database; upgrades will not be mailed.3)Upgrades are mailed to the original buyer (customer number & ultimate tag).4)SP software is available through the radio product groups.The Motorola General Radio Service Software Agreement is now available on Motorola Online. If you need assistance please feel free to submit a “Contact Us” or call 800-422-4210.SMART RIB SET UPRLN1015D SMART RIB0180302E27 AC POWER PACK 120V 2580373E86 AC POWER PACK 220V3080390B49SMARTRIB CABLE (9 PIN (F) TO 9 PIN (M) (USE WITH AT)3080390B48SMARTRIB CABLE (25 PIN (F) TO 9 PIN (M) (USE WITH XT)RLN4488ASMART RIB BATTERY PACKWIRELESS DATA GROUP PRODUTS SOFTWARERVN4126 3.59100-386/9100T DEVICES MDVN4965 3.59100-WS/T CONFIG’TN RVN41173.5MDC/RDLAP DEVICESPAGING PRODUCTS MANUALS6881011B54 3.5ADVISOR6881029B90 3.5ADVISOR ELITE 6881023B20 3.5ADVISOR GOLD 6881020B35 3.5ADVISOR PRO FLX 6881032B30 3.5BR8506881032B30 3.5LS3506881032B30 3.5LS5506881032B30 3.5LS7506881033B10 3.5LS9506881035B20 3.5MINITOR III8262947A15 3.5PAGEWRITER 20008262947A15 3.5PAGEWRITER 2000X 6881028B10 3.5TALKABOUT T3406881029B35 3.5TIMEPORT P7308262947A15 3.5TIMEPORT P930NLN3548BUNIVERSAL INTERFACE KITItem Disk Radio NumberSize Product。
HSDO辉视达监控器材报价单(不含税)
ST-609S
MINI无线影音中转器(100m-1000m)
825
ST-605
5W大功率中转〔500m—20km〕
3900
ST-460
5W无线远程微波传输系统〔参考距离5Km~25Km〕
3900
ST-408TR
1W无线双向指令收发射器〔RS485﹑RS232接口,参考距离500m~3Km〕
900
1/4CCD480TV日夜转换彩转黑
3670
AP-250
1/4SONYCCD420TV22倍自动聚焦
1500
AP-200
1/4SONYCCD480TV220倍自动聚焦
1750
AP-200L
1/4SONYCCD480TV220倍自动聚焦,彩转黑
1800
WAT-902H
1/2B/WCCD570TV
1920
1/4COLORSONYCCD470TV
630
HSD-2801C
1/4COLORSHARPCCD420TV0Lux/F1.2〔日夜两用〕
540
HSD-2802
1/3B/WSHARPCCD420TV0.8Lux
265
HSD-2802C
1/3COLORSONYCCD420TV0.8Lux
540
HSD-2803
410
ST-700
/700mw无线影音收发器(200m-1000m)
540
ST-1000
/1000mw无线影音收发器(200m-3000m)
900
ST-2000
2W大功率无线影音收发器(1Km-18Km)
1800
ST-3000
3W大功率无线影音收发器(1Km-20Km)
大华各型号LED屏参数调试及注意要点
室外双行高亮LED语音屏DH-IPMECP-324AB1.IP地址更改特别提醒：进入LedshowZK 2016软件内无论在任何一个窗口：这个按钮一定不能点击进入LedshowZK 2016软件，首先“设置-----屏参设置----密码“888”进入如下图：控制组件：BX-5K1Q-YY通讯模式：网络通讯进入“网络设置” 如下图选择“固定IP模式”点击“IP设置” 进入IP设置界面如下图：在“IP地址”栏内更改您要的IP地址点击“设置” 这样IP地址就设置完毕注意：每张控制卡出厂时默认的IP地址为“192.168.0.235”，段内例如：我们用软件把显示屏IP地址成功更改为“192.168.1.2” 那么我们电脑就必须用固定IP的方式（不能用自动获取的方式），把电脑的IP地址改为“192.168.1.***”。
只有在同一个网段内电脑才可以通过“固定IP”的方式搜索到控制卡以及发送节目。
2.屏幕参数设置如果上面操作后屏幕不能正常显示，但是内容可以正常通讯，可做如下操作：进入LedshowZK 2016软件，首先“设置-----屏参设置----密码“888”进入如下图：点击“显示屏参数”控制组件“BX-5K1Q-YY”通讯模式“网络通讯”宽度“64”高度“32”屏型“单色”数据极性“正极性”OE极性“低有效”这些设置好之后点击“加载屏参”参数设置好之后进行驱动设置，如下图：点击“扫描配置”进入驱动设置界面选中“1/8(5)”选中“1.21 上蛇形，一路数据带16行，16列折行。
”点击下方“加载扫描配置”4行4字显示屏（带语音控制卡）-非ROHS DH-IPMECP-214AB 1.IP地址更改特别提醒：进入LedshowZK 2016软件内无论在任何一个窗口：这个按钮一定不能点击进入LedshowZK 2016软件，首先“设置-----屏参设置----密码“888”进入如下图：控制组件：BX-5K1Q-YY通讯模式：网络通讯进入“网络设置” 如下图选择“固定IP模式”点击“IP设置” 进入IP设置界面如下图：在“IP地址”栏内更改您要的IP地址点击“设置” 这样IP地址就设置完毕注意：每张控制卡出厂时默认的IP地址为“192.168.0.235”，段内例如：我们用软件把显示屏IP地址成功更改为“192.168.1.2” 那么我们电脑就必须用固定IP的方式（不能用自动获取的方式），把电脑的IP地址改为“192.168.1.***”。
HX8347-D液晶屏_T_AN_preliminary_v01_090525
( DOC No. HX8347-D(T)-AN ) HX8347-D(T)240RGB x 320 dot, 262k color, with internal GRAM,TFT Mobile Single Chip Driver Preliminary version 01 September, 2008HX8347-D(T)240RGB x 320 dot, 262k color, with InternalGRAM, TFT Mobile Single Chip DriverList of Contents Sep, 2008 1. MPU mode Reference FPC Circuit and Initial Code (4)1.1 CMO (5)1.1-1CMO 2.6”Reference FPC Circuit (5)1.1-2 Initial Code for CMO 2.6” and 2.4” (6)1.1-3 CMO 2.0” 2.2” 2.4” 2.8” Reference FPC Circuit (11)1.1-4 Initial Code for CMO 2.0” (12)1.1-5 Initial Code for CMO 2.2” (17)1.1-6 Initial Code for CMO 2.8” (22)1.1-7 Initial Code for CMO 2.4” (27)1.1-8 Initial Code for CMO 2223 panel (32)1.1-9 Initial Code for CMO 2807 panel (37)1.2 CPT (42)1.2-1 CPT 2.0” Reference FPC Circuit (42)1.2-2 Initial Code for CPT 2.0” (43)2. RGB mode Reference FPC Circuit (48)2.1. Initial Code for Reference (49)3. OTP Programming (51)4. Revision History (52)HX8347-D(T)240RGB x 320 dot, 262k color, with InternalGRAM, TFT Mobile Single Chip DriverList of Figure Sep, 2008 Figure 1. 1The HX8347-D MPU Application Reference Circuit (4)Figure 2. 1 The HX8347-D SPI+RGB Application Reference Circuit (48)HX8347-D(T)240RGB x 220 dot, 262k color, with InternalGRAM, TFT Mobile Single Chip DriverList of TableSep, 2008Table 3. 1 OTP ADDRESS MAPPING (51)1. MPU mode Reference FPC Circuit and Initial CodeN R E S E TN R D _ED N C _S C LN W R _R N W3. The input pin must be fixed IOVCC or GND when no use. Refer to "Pin Description".N C SV C LD D V D HC 31P V G LV G HC 31N V R E G 1V C O MV C O M LV C O M HV D D DT EI M 0I M 1I M 2O S CDNC1DNC VCOM1VCOM NCS1NCS VDDD1VDDD NWR_SCL1NWR_SCL V G H VTEST1VTEST DDVDH1DDVDH IM3IM1C08C31NC31PIM2IM2VCOMH1VCOMH U1HX 8347-D (BUMP UP)V G L C 11P V P P _O T P H S Y N C D O T C L K D E N R E S E T N R D _E N W R _R N W I M 3I M 2C 22N D D V D H C 22P G 2G 4G 320G 1G 3G 317G 319S 1S 2S 3S 720S 719S 718G 6G 318G 315G 5V G H C 11N C O N N C O N N V C O M N C S V S S A D N C _S C L V S S C V C I V S S D V S Y N C D U M M Y 27D U M M YD U M M Y 23D U M M Y 24S 262S 263S 361S 265S 266S 267C 21P C 21N I M 0SD A D 17TE S T 10D 16D 15T E S T 9D 14D 13T E S T 8D 12D 11T E S T 7D 10D 9T E S T 6D 8D 7T E S T 5D 6D 5T E S T 4D 4D 3T E S T 3D 2D 1D 0T E S T 2T E C A B C _P W M _O U T O S C I O V C C V D D D C 12P C 12N C 31P C 31N V C L V R E G 1V T E S T V M O N I V C O M H _D U M M Y V C O M L _D U M M Y R C M 1R C M 0S R G B S M X S M Y IF S E L V C O M _D U M M YI M 1T E S T 1C A B C P W M O U T IM1IM3C12PC02 (OPEN)C12NTE1TE VCOML1VCOMLVCL1VCL NRESET1NRESET V T E S TVGL1VGL N R E S E T I O V C CNRD_E1NRD V C IN R E S E TN R D VREG1VREG1N W R _S C L VGH1VGH G N DOSC1OSC240RGB x 320 TFT PanelIM4IM0I M 3C 21N C01C 21P C11PC11NV T E S T C101--1IM3IM2IM18080 MCU 16-bits Parallel type II 00IM0D B 8D B 10D B 9D B 70Interface modeD B 12D B 11V D D D00D B 13D B 14100D B 15I O V C C 3-WIRE SERIAL INTERFACE 8080 MCU 8-bits Parallel type II D B 17D B 16S D A TE 00010110C 22N C 22P D B 1D B 0D B 4D B 3D B 201-D B 6D B 5ID 0100001011011118080 MCU 9-bits Parallel type IIC098080 MCU 16-bits Parallel type I 8080 MCU 18-bits Parallel type II 8080 MCU 9-bits Parallel type I VSSAVSSD I M 0I M 1I M 2I M 3G N DI M 2I M 0V C I I M 14-WIRE SERIAL INTERFACE 8080 MCU 8-bits Parallel type I C06V P P _O T P C01 ( C11P/N )C02 ( C12P/N )(Optional)Recommended spec.Capacitor C04 ( C21P/N )C03 ( DDVDH )1uF / 6.3Volt.C06 ( VGH )C05 ( C22P/N )C09 ( VCL)C08 ( C31P/N )C07 ( VGL )1uF / 10 Volt.1uF / 6.3Volt. C10 ( VDDD )1uF / 10 Volt.1uF / 10 Volt.1uF / 6.3 Volt.1uF / 16 Volt.1uF / 25 Volt.1uF / 6.3 Volt.1uF / 6.3 Volt.2. SDI pin is I/O pin. SDO is no use.CONN1CONN1C O N N 1V C O M L V C O M HS D AC A B C P W MD B 11CONN2CONN2C O N N 2V S S D V S S A V S S C D B 13D B 15N C S D B 5D B 9D B 8D B 10D B 14D B 12D B 7D B 4N W R _S C L D B 3D B 6D B 0D B 2D B 1D N C _S C L N R D D B 16G N DT E D B 17V R E G 1C07V G L V C L D D V D H C O N N 1C O N N 2C A B C P W M VSSCC03C04C21NC21PSRGB="0" S1,S2,S3="B,G,R"C 31P C 12P C 12N C 31N SMX="0" S720->S1RCM[1:0]="0x" MPU I/FSMY="0" G1->G320C A B C P W MPWM PWMV P P _O T PVPP_OTP1VPP_OTP IFSEL="0" REGISTER-CONTENT INTERFACED N C _S C L C058080 MCU 18-bits Paralle type I C22PN C SGND1GND GND2GND J1FPC60-0.5-4.0LV C I 1V C I 2G N D 3V C C 4I O V C C 5n R E S E T 6D B 1713D B 1614D B 1515D B 1416D B 1317D B 1218D B 1119D B 1020D B 921D B 822D B 723D B 624D B 525D B 426D B 327D B 228D B 129D B 030n R D _E 31N W R _R N W 32D N C 33n C S 34F L M 35G N D 36P W M _O U T 37V S Y N C 38H S Y N C 39D O T C L K 40E N A B L E 41S D O 42S D I 43N C 44N C 45N C 46N C 47N C 48N C 49N C 50N C 51E X T C 52D B S 53I M 354I M 255I M 156I M 057G N D 58B L +/N C 59B L _G N D /N C60D B 237D B 228D B 219D B 2010D B 1911D B 1812I M 31. VCI, IOVCC are separated from different power source to get better display quality.I O V C CV C IVCI1VCI IOVCC1IOVCC C22NFigure 1. 1The HX8347-D MPU Application Reference CircuitHX8347-D(T)240RGB x 320 dot, 262k color, with Internal GRAM, TFT Mobile Single Chip DriverPreliminary Version 01 Sep, 20081.1 CMO1.1-1CMO2.6”Reference FPC CircuitTitleSize Document Number RevDate:SheetofDriver IC ：HIMAX HX8347DA01CMO 2.6" FPC Rev A01Custom 11Friday , September 19, 2008/C S R S V C IC081u/10VNOTES 2：Set IFSEL="0"；Register-content interface mode. -V P P _O T P11-C041u/10VNOTES 3：Set IM3~IM0="1000"；80 system 18bit type I interface.NOTES 1：Set IOVCC=2.8V(1.65~3.3V);VCI=2.8V(2.5~3.3V)I O V C CC051u/10VV D D DC101u/6.3V0V C O M SDA,SCL,RS V P P _O T PVPP_OTP /C S D B 4TED B 1IM3T EVCOMIM2V C O MIOVCCV C ID B 2D B 3D B 5IM2IM3IM0IM1Valid Data bus Interface0000000010101100DB17-10, DB8-1DB7-0DB15-0ID --1DB17-10SDA,SCL 000001101111DB17-00108080 MCU 18 bits parallelDB17-9DB8-0DB17-0V C LI O V C C C091u/6.3VT EJ1V c i 1V c i 2G N D 3V c c 4V c c 5R E S T 6D B 177D B 168D B 159D B 1410D B 1311D B 1212D B 1113D B 1014D B 915D B 816D B 717D B 618D B 519D B 420D B 321D B 222D B 123D B 024R D 25W R 26R S 27C S 28F L M 29G N D 30B L +31B L -32D B 16D B 13D B 15G N DD B 9/RE S E T D B 14D B 12D B 17D B 11/R D D B 7D B 10D B 6D B 8R S T E G N DD B 0/W R IM0I M 3I M 0I M 1I M 2D B 0C031u/10VD D V D H8080 MCU 18-bits Parallel type II 8080 MCU 16-bits Parallel type I 8080 MCU 9-bits Parallel type II3-WIRE SERIA L INTERFA CE 8080 MCU 8-bits Parallel type II 8080 MCU 16-bits Parallel type II 8080 MCU 18-bits Paralle type I 8080 MCU 8-bits Parallel type I 4-WIRE SERIA L INTERFA CE 8080 MCU 9-bits Parallel type I C02 ( C12P/N )(Optional)Recommended spec.CapacitorC01 ( C11P/N )C07 ( VGL )C06 ( VGH )C05 ( C22P/N )C04 ( C21P/N )C03 ( DDVDH )1uF / 6.3Volt.1uF / 10 Volt.1uF / 6.3Volt. C10 ( VDDD )C09 ( VCL)C08 ( C31P/N )1uF / 6.3 Volt.1uF / 16 Volt.1uF / 25 Volt.1uF / 10 Volt.1uF / 10 Volt.1uF / 6.3 Volt.1uF / 6.3 Volt.D B 1C O G 1C O G 2D B 2C A B C _P W M O U TD B 3D B 4COG1O G 1COG2C O G 2D B 5D B 6C A B C _P W M O U TCABC_PWMOUTD B 7D B 8C011u/6.3VD B 10D B 9CMO PanelV C O M 2C O G 13C O G 24C 22P 5C 22N 6C 21P 7C 21N 8V G H 9V G H 10D U M M Y 11V G L 12V G L 13V T E S T 14C A B C _P W O U T 15V C L 16V C L 17C 31P 18C 31P 19C 31N 20C 31N 21V P P _O T P 22V P P _O T P 23V S S D 24V S S D 25V S S C 26V S S C 27V S S A 28V S S A 29V C I 30V C I 31D N C _S C L 32N C S 33V S Y N C 34H S Y N C 35D O T C L K 36D E 37N R E S E T 38N R D 39N W R _S C L 40I M 341I M 242I M 143I M 044S D A 45D B 1746D B 1647D B 1548D B 1449D B 1350T E S T 851D B 1252D B 1153T E S T 754D B 1055D B 956T E S T 657D B 858D B 759T E S T 560D B 661D B 562T E S T 463D B 464D B 365T E S T 366D B 267D B 168D B 069T E 70C A B C _P W O U T 71I O V C C 72I O V C C 73V D D D 74V D D D 75C 12P 76C 12P 77C 12N 78C 12N 79C 11P 80C 11P 81C 11N 82C 11N 83D D V D H 84D D V D H 85V R E G 186I F S E L 87R C M 088R C M 189S R G B 90S M X 91S M Y 92V C O M 93V C O M94V C O M 1D B 11D B 12C021u/6.3V (open)D B 13D B 14D B 15D B 16D B 17/W R /R D /RE S E T C061u/25VV G HIM1V G LC071u/16V1.1-2 Initial Code for CMO2.6” and 2.4”//##################################################################.M51_WR_REG(U05_LCD_POWER_ON, 0x0F); //VCI & IOVCC ONDelayX1ms(10);//RESETM51_WR_REG(U05_LCD_RST, 0x01); // LCD HW RST Enable DelayX1ms(5);M51_WR_REG(U05_LCD_RST, 0x00); // LCD HW RST Disable.DelayX1ms(10);//Driving ability SettingSet_LCD_8B_REG(0xEA,0x00); //PTBA[15:8]Set_LCD_8B_REG(0xEB,0x20); //PTBA[7:0]Set_LCD_8B_REG(0xEC,0x0C); //STBA[15:8]Set_LCD_8B_REG(0xED,0xC4); //STBA[7:0]Set_LCD_8B_REG(0xE8,0x40); //OPON[7:0]Set_LCD_8B_REG(0xE9,0x38); //OPON1[7:0]Set_LCD_8B_REG(0xF1,0x01); //OTPS1BSet_LCD_8B_REG(0xF2,0x10); //GENSet_LCD_8B_REG(0x27,0xA3); ////Gamma 2.2 SettingSet_LCD_8B_REG(0x40,0x01); //Set_LCD_8B_REG(0x41,0x00); //Set_LCD_8B_REG(0x42,0x00); //Set_LCD_8B_REG(0x43,0x10); //Set_LCD_8B_REG(0x44,0x0E); //Set_LCD_8B_REG(0x45,0x24); //Set_LCD_8B_REG(0x46,0x04); //Set_LCD_8B_REG(0x47,0x50); //Set_LCD_8B_REG(0x48,0x02); //Set_LCD_8B_REG(0x49,0x13); //Set_LCD_8B_REG(0x4A,0x19); //Set_LCD_8B_REG(0x4B,0x19); //Set_LCD_8B_REG(0x4C,0x16); //Set_LCD_8B_REG(0x50,0x1B); //Set_LCD_8B_REG(0x51,0x31); //Set_LCD_8B_REG(0x52,0x2F); //Set_LCD_8B_REG(0x53,0x3F); //Set_LCD_8B_REG(0x55,0x3E); //Set_LCD_8B_REG(0x56,0x2F); //Set_LCD_8B_REG(0x57,0x7B); //Set_LCD_8B_REG(0x58,0x09); //Set_LCD_8B_REG(0x59,0x06); //Set_LCD_8B_REG(0x5A,0x06); //Set_LCD_8B_REG(0x5B,0x0C); //Set_LCD_8B_REG(0x5C,0x1D); //Set_LCD_8B_REG(0x5D,0xCC); ////Power Voltage SettingSet_LCD_8B_REG(0x1B,0x1B); //VRH=4.65VSet_LCD_8B_REG(0x1A,0x01); //BT (VGH~15V,VGL~-10V,DDVDH~5V)Set_LCD_8B_REG(0x24,0x2F); //VMH(VCOM High voltage ~3.2V)Set_LCD_8B_REG(0x25,0x57); //VML(VCOM Low voltage -1.2V)//****VCOM offset**///Set_LCD_8B_REG(0x23,0x88); //for Flicker adjust //can reload from OTP//Power on SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x01,0x00); //DP_STB='0', out deep sleepSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);//262k/65k color selectionSet_LCD_8B_REG(0x17,0x06); //default 0x06 262k color // 0x05 65k color//SET PANELSet_LCD_8B_REG(0x36,0x00); //SS_P, GS_P,REV_P,BGR_P//Display ON SettingSet_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3C); //GON=1, DTE=1, D=1100//Set GRAM AreaSet_LCD_8B_REG(0x02,0x00);Set_LCD_8B_REG(0x03,0x00); //Column StartSet_LCD_8B_REG(0x04,0x00);Set_LCD_8B_REG(0x05,0xEF); //Column EndSet_LCD_8B_REG(0x06,0x00);Set_LCD_8B_REG(0x07,0x00); //Row StartSet_LCD_8B_REG(0x08,0x01);Set_LCD_8B_REG(0x09,0x3F); //Row EndWR_8B_FORMAT(0x22); //Start GRAM write//##################################################################// Power Off SettingSet_LCD_8B_REG(0x28,0x38); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);M51_WR_REG(U05_LCD_POWER_ON, 0x00); //VCI & IOVCC OFF//##################################################################// ENTER IDLE mode SettingSet_LCD_8B_REG(0x18,0x34); //I/P_RADJ,N/P_RADJ, IDLE mode 55HzSet_LCD_8B_REG(0x2F,0x11); //IDLE mode line inversionSet_LCD_8B_REG(0x01,0x04); //IDLE='1' , enter IDLE mode// EXIT IDLE mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode line inversionSet_LCD_8B_REG(0x01,0x00); //IDLE='0', EXIT IDLE mode//##################################################################// ENTER Partial mode Setting 32lineSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ Partial mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Partial mode line inversionSet_LCD_8B_REG(0x01,0x01); //PTL='1', Enter Partial modeSet_LCD_8B_REG(0x0A,0x00); //PSL[15:8]=0x00Set_LCD_8B_REG(0x0B,0x20); //PSL[7:0]=0x20Set_LCD_8B_REG(0x0C,0x00); //PEL[15:8]=0x00Set_LCD_8B_REG(0x0D,0x47); //PEL[7:0]=0x47Set_LCD_8B_REG(0x26,0x01); //refresh cycle=5frame// EXIT Partial mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode, line inversionSet_LCD_8B_REG(0x01,0x00); //PTL='0', EXIT Partial mode//##################################################################// ENTER Partial + IDLE mode Setting 32lineSet_LCD_8B_REG(0x18,0x34); //I/P_RADJ,N/P_RADJ, Partial mode 55HzSet_LCD_8B_REG(0x2F,0x11); // Partial + IDLE mode line inversionSet_LCD_8B_REG(0x01,0x09); // PTL='1' IDLE=’1’, Enter Partial + IDLE modeSet_LCD_8B_REG(0x0A,0x00); //PSL[15:8]=0x00Set_LCD_8B_REG(0x0B,0x20); //PSL[7:0]=0x20Set_LCD_8B_REG(0x0C,0x00); //PEL[15:8]=0x00Set_LCD_8B_REG(0x0D,0x47); //PEL[7:0]=0x47Set_LCD_8B_REG(0x26,0x01); //refresh cycle=5frame// EXIT Partial + IDLE mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ ,Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode, line inversionSet_LCD_8B_REG(0x01,0x00); // PTL='0' IDLE=’0’, EXIT Partial + IDLE mode//##################################################################// Enter Sleep mode SettingSet_LCD_8B_REG(0x28,0x38); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);// Exit Sleep mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3F); //GON=1, DTE=1, D=1100//##################################################################// Enter Deep Sleep mode SettingSet_LCD_8B_REG(0x28,0x38); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);Set_LCD_8B_REG(0x01,0xC0); //DP_STB[1:0]=’11’// Exit Deep Sleep mode SettingSet_LCD_8B_REG(0x01,0x00); //DP_STB='0', out deep sleepDelayX1ms(10);Set_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3F); //GON=1, DTE=1, D=1100WR_8B_FORMAT(0x22); //Start GRAM write1.1-3 CMO2.0” 2.2” 2.4” 2.8” Reference FPC CircuitR S /C S V C ITitle Size Document NumberRev Date:SheetofDriv er IC ：HIMAX HX 8347DA01CMO 2.0" FPC Rev A01B 11Wednesday , October 08, 2008C081u/10VNOTES 2：Set IFSEL="0"；Register-content interface mode. -V P P _O T P11-C041u/10VNOTES 3：Set IM3~IM0="1000"；80 system 18bit type I interface.NOTES 1：Set IOVCC=2.8V(1.65~3.3V);VCI=2.8V(2.5~3.3V)C051u/10V0V C O M SDA,SCL,RS V P P _O T PD B 4/C S T EVPP_OTP IM3D B 1TEIM2V C ID B 5IOVCCD B 3D B 2IM3IM2IM1VCOMIM0InterfaceValid Data bus 0000000010100011DB15-0DB7-0DB17-10, DB8-1DB17-101--ID SDA,SCL 000001011111010I O V C C DB17-0V C LDB17-0DB8-0DB17-98080 MCU 18 bits parallelG N DC091u/6.3VD B 15D B 13D B 16J1V c 1V c 2G N D 3V c c 4V c c 5R E S T 6D B 177D B 168D B 159D B 1410D B 1311D B 1212D B 1113D B 1014D B 915D B 816D B 717D B 618D B 519D B 420D B 321D B 222D B 123D B 024R D 25W R 26R S 27C S 28F L M 29G N D 30B L +31B L -32D B 11D B 17D B 12D B 14/RE S E T D B 9D B 8D B 6D B 10D B 7/R D /W R D B 0G N DT E R S IM08080 MCU 16-bits Parallel type II 8080 MCU 8-bits Parallel type II 3-WIRE SERIA L INTERFA CE 8080 MCU 9-bits Parallel type II8080 MCU 16-bits Parallel type I 8080 MCU 18-bits Parallel type II 8080 MCU 9-bits Parallel type I 4-WIRE SERIA L INTERFA CE 8080 MCU 8-bits Parallel type I 8080 MCU 18-bits Paralle type I C01 ( C11P/N )CapacitorRecommended spec.C02 ( C12P/N )(Optional)1uF / 6.3Volt.C03 ( DDVDH )C04 ( C21P/N )C05 ( C22P/N )C06 ( VGH )C07 ( VGL )C08 ( C31P/N )C09 ( VCL)C10 ( VDDD )1uF / 6.3Volt. 1uF / 10 Volt.1uF / 10 Volt.1uF / 10 Volt.1uF / 25 Volt.1uF / 16 Volt.1uF / 6.3 Volt.1uF / 6.3 Volt.1uF / 6.3 Volt.C O G 1C O G 2C A B C _P W M O U TO G 1COG1C O G 2COG2C A B C _P W M O U TCABC_PWMOUTV G HC061u/25VIM1V G LC071u/16VT ED B 0D B 1D B 2D B 4D B 3D B 6D B 5D B 8D B 7D B 10D B 9D B 12D B 11D B 14D B 13CMO PanelV C O M 2C O G 13C O G 24C 21P 5C 21N 6C 22P 7C 22N 8V G H 9V G H 10D U M M Y 11V G L 12V G L 13V T E S T 14C A B C _P W M O U T 15V C L 16V C L 17C 31P 18C 31P 19C 31N 20C 31N 21V P P _O T P 22V P P _O T P 23V S S D 24V S S D 25V S S C 26V S S C 27V S S C 28V S S A 29V S S A 30V S S A 31V S S A 32V S S A 33V C I 34V C I 35D N C _S C L 36N C S 37V S Y N C 38H S Y N C 39D O T C L K 40D E 41N R E S E T 42N R D 43N W R _S C L 44I M 345I M 246I M 147I M 048S D A 49D B 1750D B 1651D B 1552T E S T 953D B 1454D B 1355T E S T 856D B 1257D B 1158T E S T 759D B 1060D B 961T E S T 662D B 863D B 764T E S T 565D B 666D B 567T E S T 468D B 469D B 370T E S T 371D B 272D B 173D B 074T E 75C A B C _P W M _O U T 76O S C 77I O V C C 78I O V C C 79V D D D 80V D D D 81V D D D 82V D D D 83V D D D 84V D D D 85C 12P 86C 12P 87C 12N 88C 12N 89C 11P 90C 11P 91C 11N 92C 11N 93D D V D H 94V C O M 1D D V D H 95V R E G 196I F S E L 97V C O M L _D U M 98V C O M H _D U M 99R C M 0100R C M 1101S R G B 102S M X 103S M Y 104V C O M _D U M 105V C O M _D U M106D D V D HC031u/10VC011u/6.3VC021u/6.3V (open)V D D DC101u/6.3VI O V C CD B 16D B 15D B 17I M 3I M 2I M 1I M 0/W R /R D /R E S E T1.1-4 Initial Code for CMO2.0”//##################################################################.M51_WR_REG(U05_LCD_POWER_ON, 0x0F); //VCI & IOVCC ONDelayX1ms(10);//RESETM51_WR_REG(U05_LCD_RST, 0x01); // LCD HW RST Enable DelayX1ms(5);M51_WR_REG(U05_LCD_RST, 0x00); // LCD HW RST Disable.DelayX1ms(10);//Driving ability SettingSet_LCD_8B_REG(0xEA,0x00); //PTBA[15:8]Set_LCD_8B_REG(0xEB,0x20); //PTBA[7:0]Set_LCD_8B_REG(0xEC,0x0C); //STBA[15:8]Set_LCD_8B_REG(0xED,0xC4); //STBA[7:0]Set_LCD_8B_REG(0xE8,0x40); //OPON[7:0]Set_LCD_8B_REG(0xE9,0x38); //OPON1[7:0]Set_LCD_8B_REG(0xF1,0x01); //OTPS1BSet_LCD_8B_REG(0xF2,0x10); //GENSet_LCD_8B_REG(0x27,0xA3); ////Gamma 2.2 SettingSet_LCD_8B_REG(0x40,0x00); //Set_LCD_8B_REG(0x41,0x00); //Set_LCD_8B_REG(0x42,0x01); //Set_LCD_8B_REG(0x43,0x12); //Set_LCD_8B_REG(0x44,0x10); //Set_LCD_8B_REG(0x45,0x26); //Set_LCD_8B_REG(0x46,0x08); //Set_LCD_8B_REG(0x47,0x54); //Set_LCD_8B_REG(0x48,0x02); //Set_LCD_8B_REG(0x49,0x15); //Set_LCD_8B_REG(0x4A,0x19); //Set_LCD_8B_REG(0x4B,0x19); //Set_LCD_8B_REG(0x4C,0x16); //Set_LCD_8B_REG(0x50,0x19); //Set_LCD_8B_REG(0x51,0x2F); //Set_LCD_8B_REG(0x52,0x2D); //Set_LCD_8B_REG(0x53,0x3E); //Set_LCD_8B_REG(0x55,0x3F); //Set_LCD_8B_REG(0x56,0x2B); //Set_LCD_8B_REG(0x57,0x77); //Set_LCD_8B_REG(0x58,0x09); //Set_LCD_8B_REG(0x59,0x06); //Set_LCD_8B_REG(0x5A,0x06); //Set_LCD_8B_REG(0x5B,0x0A); //Set_LCD_8B_REG(0x5C,0x1D); //Set_LCD_8B_REG(0x5D,0xCC); ////Power Voltage SettingSet_LCD_8B_REG(0x1B,0x1B); //VRH=4.65VSet_LCD_8B_REG(0x1A,0x01); //BT (VGH~15V,VGL~-10V,DDVDH~5V)Set_LCD_8B_REG(0x24,0x2F); //VMH(VCOM High voltage ~3.2V)Set_LCD_8B_REG(0x25,0x57); //VML(VCOM Low voltage -1.2V)//****VCOM offset**///Set_LCD_8B_REG(0x23,0x79); //for Flicker adjust //can reload from OTP//Power on SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x01,0x00); //DP_STB='0', out deep sleepSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);//262k/65k color selectionSet_LCD_8B_REG(0x17,0x06); //default 0x06 262k color // 0x05 65k color//SET PANELSet_LCD_8B_REG(0x36,0x00); //SS_P, GS_P,REV_P,BGR_P//Display ON SettingSet_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3C); //GON=1, DTE=1, D=1100//Set GRAM AreaSet_LCD_8B_REG(0x02,0x00);Set_LCD_8B_REG(0x03,0x00); //Column StartSet_LCD_8B_REG(0x04,0x00);Set_LCD_8B_REG(0x05,0xEF); //Column EndSet_LCD_8B_REG(0x06,0x00);Set_LCD_8B_REG(0x07,0x00); //Row StartSet_LCD_8B_REG(0x08,0x01);Set_LCD_8B_REG(0x09,0x3F); //Row EndWR_8B_FORMAT(0x22); //Start GRAM write//##################################################################// Power Off SettingSet_LCD_8B_REG(0x28,0x38); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);M51_WR_REG(U05_LCD_POWER_ON, 0x00); //VCI & IOVCC OFF//##################################################################// ENTER IDLE mode SettingSet_LCD_8B_REG(0x18,0x34); //I/P_RADJ,N/P_RADJ, IDLE mode 55HzSet_LCD_8B_REG(0x2F,0x11); //IDLE mode line inversionSet_LCD_8B_REG(0x01,0x04); //IDLE='1' , enter IDLE mode// EXIT IDLE mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode line inversionSet_LCD_8B_REG(0x01,0x00); //IDLE='0', EXIT IDLE mode//##################################################################// ENTER Partial mode Setting 32lineSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ Partial mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Partial mode line inversionSet_LCD_8B_REG(0x01,0x01); //PTL='1', Enter Partial modeSet_LCD_8B_REG(0x0A,0x00); //PSL[15:8]=0x00Set_LCD_8B_REG(0x0B,0x20); //PSL[7:0]=0x20Set_LCD_8B_REG(0x0C,0x00); //PEL[15:8]=0x00Set_LCD_8B_REG(0x0D,0x47); //PEL[7:0]=0x47Set_LCD_8B_REG(0x26,0x01); //refresh cycle=5frame// EXIT Partial mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode, line inversionSet_LCD_8B_REG(0x01,0x00); //PTL='0', EXIT Partial mode//##################################################################// ENTER Partial + IDLE mode Setting 32lineSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Partial mode 55HzSet_LCD_8B_REG(0x2F,0x11); // Partial + IDLE mode line inversionSet_LCD_8B_REG(0x01,0x09); // PTL='1' IDLE=’1’, Enter Partial + IDLE modeSet_LCD_8B_REG(0x0A,0x00); //PSL[15:8]=0x00Set_LCD_8B_REG(0x0B,0x20); //PSL[7:0]=0x20Set_LCD_8B_REG(0x0C,0x00); //PEL[15:8]=0x00Set_LCD_8B_REG(0x0D,0x47); //PEL[7:0]=0x47Set_LCD_8B_REG(0x26,0x01); //refresh cycle=5frame// EXIT Partial + IDLE mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ ,Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode, line inversionSet_LCD_8B_REG(0x01,0x00); // PTL='0' IDLE=’0’, EXIT Partial + IDLE mode//##################################################################// Enter Sleep mode SettingSet_LCD_8B_REG(0x28,0xB8); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);// Exit Sleep mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3F); //GON=1, DTE=1, D=1100//##################################################################// Enter Deep Sleep mode SettingSet_LCD_8B_REG(0x28,0xB8); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);Set_LCD_8B_REG(0x01,0xC0); //DP_STB[1:0]=’11’// Exit Deep Sleep mode SettingSet_LCD_8B_REG(0x01,0x00); //DP_STB='0', out deep sleepDelayX1ms(10);Set_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3F); //GON=1, DTE=1, D=1100WR_8B_FORMAT(0x22); //Start GRAM write。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
( DOC No. HX8347-D(T)-AN ) HX8347-D(T)240RGB x 320 dot, 262k color, with internal GRAM,TFT Mobile Single Chip Driver Preliminary version 01 September, 2008HX8347-D(T)240RGB x 320 dot, 262k color, with InternalGRAM, TFT Mobile Single Chip DriverList of Contents Sep, 2008 1. MPU mode Reference FPC Circuit and Initial Code (4)1.1 CMO (5)1.1-1CMO 2.6”Reference FPC Circuit (5)1.1-2 Initial Code for CMO 2.6” and 2.4” (6)1.1-3 CMO 2.0” 2.2” 2.4” 2.8” Reference FPC Circuit (11)1.1-4 Initial Code for CMO 2.0” (12)1.1-5 Initial Code for CMO 2.2” (17)1.1-6 Initial Code for CMO 2.8” (22)1.1-7 Initial Code for CMO 2.4” (27)1.1-8 Initial Code for CMO 2223 panel (32)1.1-9 Initial Code for CMO 2807 panel (37)1.2 CPT (42)1.2-1 CPT 2.0” Reference FPC Circuit (42)1.2-2 Initial Code for CPT 2.0” (43)2. RGB mode Reference FPC Circuit (48)2.1. Initial Code for Reference (49)3. OTP Programming (51)4. Revision History (52)HX8347-D(T)240RGB x 320 dot, 262k color, with InternalGRAM, TFT Mobile Single Chip DriverList of Figure Sep, 2008 Figure 1. 1The HX8347-D MPU Application Reference Circuit (4)Figure 2. 1 The HX8347-D SPI+RGB Application Reference Circuit (48)HX8347-D(T)240RGB x 220 dot, 262k color, with InternalGRAM, TFT Mobile Single Chip DriverList of TableSep, 2008Table 3. 1 OTP ADDRESS MAPPING (51)1. MPU mode Reference FPC Circuit and Initial CodeN R E S E TN R D _ED N C _S C LN W R _R N W3. The input pin must be fixed IOVCC or GND when no use. Refer to "Pin Description".N C SV C LD D V D HC 31P V G LV G HC 31N V R E G 1V C O MV C O M LV C O M HV D D DT EI M 0I M 1I M 2O S CDNC1DNC VCOM1VCOM NCS1NCS VDDD1VDDD NWR_SCL1NWR_SCL V G H VTEST1VTEST DDVDH1DDVDH IM3IM1C08C31NC31PIM2IM2VCOMH1VCOMH U1HX 8347-D (BUMP UP)V G L C 11P V P P _O T P H S Y N C D O T C L K D E N R E S E T N R D _E N W R _R N W I M 3I M 2C 22N D D V D H C 22P G 2G 4G 320G 1G 3G 317G 319S 1S 2S 3S 720S 719S 718G 6G 318G 315G 5V G H C 11N C O N N C O N N V C O M N C S V S S A D N C _S C L V S S C V C I V S S D V S Y N C D U M M Y 27D U M M YD U M M Y 23D U M M Y 24S 262S 263S 361S 265S 266S 267C 21P C 21N I M 0SD A D 17TE S T 10D 16D 15T E S T 9D 14D 13T E S T 8D 12D 11T E S T 7D 10D 9T E S T 6D 8D 7T E S T 5D 6D 5T E S T 4D 4D 3T E S T 3D 2D 1D 0T E S T 2T E C A B C _P W M _O U T O S C I O V C C V D D D C 12P C 12N C 31P C 31N V C L V R E G 1V T E S T V M O N I V C O M H _D U M M Y V C O M L _D U M M Y R C M 1R C M 0S R G B S M X S M Y IF S E L V C O M _D U M M YI M 1T E S T 1C A B C P W M O U T IM1IM3C12PC02 (OPEN)C12NTE1TE VCOML1VCOMLVCL1VCL NRESET1NRESET V T E S TVGL1VGL N R E S E T I O V C CNRD_E1NRD V C IN R E S E TN R D VREG1VREG1N W R _S C L VGH1VGH G N DOSC1OSC240RGB x 320 TFT PanelIM4IM0I M 3C 21N C01C 21P C11PC11NV T E S T C101--1IM3IM2IM18080 MCU 16-bits Parallel type II 00IM0D B 8D B 10D B 9D B 70Interface modeD B 12D B 11V D D D00D B 13D B 14100D B 15I O V C C 3-WIRE SERIAL INTERFACE 8080 MCU 8-bits Parallel type II D B 17D B 16S D A TE 00010110C 22N C 22P D B 1D B 0D B 4D B 3D B 201-D B 6D B 5ID 0100001011011118080 MCU 9-bits Parallel type IIC098080 MCU 16-bits Parallel type I 8080 MCU 18-bits Parallel type II 8080 MCU 9-bits Parallel type I VSSAVSSD I M 0I M 1I M 2I M 3G N DI M 2I M 0V C I I M 14-WIRE SERIAL INTERFACE 8080 MCU 8-bits Parallel type I C06V P P _O T P C01 ( C11P/N )C02 ( C12P/N )(Optional)Recommended spec.Capacitor C04 ( C21P/N )C03 ( DDVDH )1uF / 6.3Volt.C06 ( VGH )C05 ( C22P/N )C09 ( VCL)C08 ( C31P/N )C07 ( VGL )1uF / 10 Volt.1uF / 6.3Volt. C10 ( VDDD )1uF / 10 Volt.1uF / 10 Volt.1uF / 6.3 Volt.1uF / 16 Volt.1uF / 25 Volt.1uF / 6.3 Volt.1uF / 6.3 Volt.2. SDI pin is I/O pin. SDO is no use.CONN1CONN1C O N N 1V C O M L V C O M HS D AC A B C P W MD B 11CONN2CONN2C O N N 2V S S D V S S A V S S C D B 13D B 15N C S D B 5D B 9D B 8D B 10D B 14D B 12D B 7D B 4N W R _S C L D B 3D B 6D B 0D B 2D B 1D N C _S C L N R D D B 16G N DT E D B 17V R E G 1C07V G L V C L D D V D H C O N N 1C O N N 2C A B C P W M VSSCC03C04C21NC21PSRGB="0" S1,S2,S3="B,G,R"C 31P C 12P C 12N C 31N SMX="0" S720->S1RCM[1:0]="0x" MPU I/FSMY="0" G1->G320C A B C P W MPWM PWMV P P _O T PVPP_OTP1VPP_OTP IFSEL="0" REGISTER-CONTENT INTERFACED N C _S C L C058080 MCU 18-bits Paralle type I C22PN C SGND1GND GND2GND J1FPC60-0.5-4.0LV C I 1V C I 2G N D 3V C C 4I O V C C 5n R E S E T 6D B 1713D B 1614D B 1515D B 1416D B 1317D B 1218D B 1119D B 1020D B 921D B 822D B 723D B 624D B 525D B 426D B 327D B 228D B 129D B 030n R D _E 31N W R _R N W 32D N C 33n C S 34F L M 35G N D 36P W M _O U T 37V S Y N C 38H S Y N C 39D O T C L K 40E N A B L E 41S D O 42S D I 43N C 44N C 45N C 46N C 47N C 48N C 49N C 50N C 51E X T C 52D B S 53I M 354I M 255I M 156I M 057G N D 58B L +/N C 59B L _G N D /N C60D B 237D B 228D B 219D B 2010D B 1911D B 1812I M 31. VCI, IOVCC are separated from different power source to get better display quality.I O V C CV C IVCI1VCI IOVCC1IOVCC C22NFigure 1. 1The HX8347-D MPU Application Reference CircuitHX8347-D(T)240RGB x 320 dot, 262k color, with Internal GRAM, TFT Mobile Single Chip DriverPreliminary Version 01 Sep, 20081.1 CMO1.1-1CMO2.6”Reference FPC CircuitTitleSize Document Number RevDate:SheetofDriver IC ：HIMAX HX8347DA01CMO 2.6" FPC Rev A01Custom 11Friday , September 19, 2008/C S R S V C IC081u/10VNOTES 2：Set IFSEL="0"；Register-content interface mode. -V P P _O T P11-C041u/10VNOTES 3：Set IM3~IM0="1000"；80 system 18bit type I interface.NOTES 1：Set IOVCC=2.8V(1.65~3.3V);VCI=2.8V(2.5~3.3V)I O V C CC051u/10VV D D DC101u/6.3V0V C O M SDA,SCL,RS V P P _O T PVPP_OTP /C S D B 4TED B 1IM3T EVCOMIM2V C O MIOVCCV C ID B 2D B 3D B 5IM2IM3IM0IM1Valid Data bus Interface0000000010101100DB17-10, DB8-1DB7-0DB15-0ID --1DB17-10SDA,SCL 000001101111DB17-00108080 MCU 18 bits parallelDB17-9DB8-0DB17-0V C LI O V C C C091u/6.3VT EJ1V c i 1V c i 2G N D 3V c c 4V c c 5R E S T 6D B 177D B 168D B 159D B 1410D B 1311D B 1212D B 1113D B 1014D B 915D B 816D B 717D B 618D B 519D B 420D B 321D B 222D B 123D B 024R D 25W R 26R S 27C S 28F L M 29G N D 30B L +31B L -32D B 16D B 13D B 15G N DD B 9/RE S E T D B 14D B 12D B 17D B 11/R D D B 7D B 10D B 6D B 8R S T E G N DD B 0/W R IM0I M 3I M 0I M 1I M 2D B 0C031u/10VD D V D H8080 MCU 18-bits Parallel type II 8080 MCU 16-bits Parallel type I 8080 MCU 9-bits Parallel type II3-WIRE SERIA L INTERFA CE 8080 MCU 8-bits Parallel type II 8080 MCU 16-bits Parallel type II 8080 MCU 18-bits Paralle type I 8080 MCU 8-bits Parallel type I 4-WIRE SERIA L INTERFA CE 8080 MCU 9-bits Parallel type I C02 ( C12P/N )(Optional)Recommended spec.CapacitorC01 ( C11P/N )C07 ( VGL )C06 ( VGH )C05 ( C22P/N )C04 ( C21P/N )C03 ( DDVDH )1uF / 6.3Volt.1uF / 10 Volt.1uF / 6.3Volt. C10 ( VDDD )C09 ( VCL)C08 ( C31P/N )1uF / 6.3 Volt.1uF / 16 Volt.1uF / 25 Volt.1uF / 10 Volt.1uF / 10 Volt.1uF / 6.3 Volt.1uF / 6.3 Volt.D B 1C O G 1C O G 2D B 2C A B C _P W M O U TD B 3D B 4COG1O G 1COG2C O G 2D B 5D B 6C A B C _P W M O U TCABC_PWMOUTD B 7D B 8C011u/6.3VD B 10D B 9CMO PanelV C O M 2C O G 13C O G 24C 22P 5C 22N 6C 21P 7C 21N 8V G H 9V G H 10D U M M Y 11V G L 12V G L 13V T E S T 14C A B C _P W O U T 15V C L 16V C L 17C 31P 18C 31P 19C 31N 20C 31N 21V P P _O T P 22V P P _O T P 23V S S D 24V S S D 25V S S C 26V S S C 27V S S A 28V S S A 29V C I 30V C I 31D N C _S C L 32N C S 33V S Y N C 34H S Y N C 35D O T C L K 36D E 37N R E S E T 38N R D 39N W R _S C L 40I M 341I M 242I M 143I M 044S D A 45D B 1746D B 1647D B 1548D B 1449D B 1350T E S T 851D B 1252D B 1153T E S T 754D B 1055D B 956T E S T 657D B 858D B 759T E S T 560D B 661D B 562T E S T 463D B 464D B 365T E S T 366D B 267D B 168D B 069T E 70C A B C _P W O U T 71I O V C C 72I O V C C 73V D D D 74V D D D 75C 12P 76C 12P 77C 12N 78C 12N 79C 11P 80C 11P 81C 11N 82C 11N 83D D V D H 84D D V D H 85V R E G 186I F S E L 87R C M 088R C M 189S R G B 90S M X 91S M Y 92V C O M 93V C O M94V C O M 1D B 11D B 12C021u/6.3V (open)D B 13D B 14D B 15D B 16D B 17/W R /R D /RE S E T C061u/25VV G HIM1V G LC071u/16V1.1-2 Initial Code for CMO2.6” and 2.4”//##################################################################.M51_WR_REG(U05_LCD_POWER_ON, 0x0F); //VCI & IOVCC ONDelayX1ms(10);//RESETM51_WR_REG(U05_LCD_RST, 0x01); // LCD HW RST Enable DelayX1ms(5);M51_WR_REG(U05_LCD_RST, 0x00); // LCD HW RST Disable.DelayX1ms(10);//Driving ability SettingSet_LCD_8B_REG(0xEA,0x00); //PTBA[15:8]Set_LCD_8B_REG(0xEB,0x20); //PTBA[7:0]Set_LCD_8B_REG(0xEC,0x0C); //STBA[15:8]Set_LCD_8B_REG(0xED,0xC4); //STBA[7:0]Set_LCD_8B_REG(0xE8,0x40); //OPON[7:0]Set_LCD_8B_REG(0xE9,0x38); //OPON1[7:0]Set_LCD_8B_REG(0xF1,0x01); //OTPS1BSet_LCD_8B_REG(0xF2,0x10); //GENSet_LCD_8B_REG(0x27,0xA3); ////Gamma 2.2 SettingSet_LCD_8B_REG(0x40,0x01); //Set_LCD_8B_REG(0x41,0x00); //Set_LCD_8B_REG(0x42,0x00); //Set_LCD_8B_REG(0x43,0x10); //Set_LCD_8B_REG(0x44,0x0E); //Set_LCD_8B_REG(0x45,0x24); //Set_LCD_8B_REG(0x46,0x04); //Set_LCD_8B_REG(0x47,0x50); //Set_LCD_8B_REG(0x48,0x02); //Set_LCD_8B_REG(0x49,0x13); //Set_LCD_8B_REG(0x4A,0x19); //Set_LCD_8B_REG(0x4B,0x19); //Set_LCD_8B_REG(0x4C,0x16); //Set_LCD_8B_REG(0x50,0x1B); //Set_LCD_8B_REG(0x51,0x31); //Set_LCD_8B_REG(0x52,0x2F); //Set_LCD_8B_REG(0x53,0x3F); //Set_LCD_8B_REG(0x55,0x3E); //Set_LCD_8B_REG(0x56,0x2F); //Set_LCD_8B_REG(0x57,0x7B); //Set_LCD_8B_REG(0x58,0x09); //Set_LCD_8B_REG(0x59,0x06); //Set_LCD_8B_REG(0x5A,0x06); //Set_LCD_8B_REG(0x5B,0x0C); //Set_LCD_8B_REG(0x5C,0x1D); //Set_LCD_8B_REG(0x5D,0xCC); ////Power Voltage SettingSet_LCD_8B_REG(0x1B,0x1B); //VRH=4.65VSet_LCD_8B_REG(0x1A,0x01); //BT (VGH~15V,VGL~-10V,DDVDH~5V)Set_LCD_8B_REG(0x24,0x2F); //VMH(VCOM High voltage ~3.2V)Set_LCD_8B_REG(0x25,0x57); //VML(VCOM Low voltage -1.2V)//****VCOM offset**///Set_LCD_8B_REG(0x23,0x88); //for Flicker adjust //can reload from OTP//Power on SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x01,0x00); //DP_STB='0', out deep sleepSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);//262k/65k color selectionSet_LCD_8B_REG(0x17,0x06); //default 0x06 262k color // 0x05 65k color//SET PANELSet_LCD_8B_REG(0x36,0x00); //SS_P, GS_P,REV_P,BGR_P//Display ON SettingSet_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3C); //GON=1, DTE=1, D=1100//Set GRAM AreaSet_LCD_8B_REG(0x02,0x00);Set_LCD_8B_REG(0x03,0x00); //Column StartSet_LCD_8B_REG(0x04,0x00);Set_LCD_8B_REG(0x05,0xEF); //Column EndSet_LCD_8B_REG(0x06,0x00);Set_LCD_8B_REG(0x07,0x00); //Row StartSet_LCD_8B_REG(0x08,0x01);Set_LCD_8B_REG(0x09,0x3F); //Row EndWR_8B_FORMAT(0x22); //Start GRAM write//##################################################################// Power Off SettingSet_LCD_8B_REG(0x28,0x38); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);M51_WR_REG(U05_LCD_POWER_ON, 0x00); //VCI & IOVCC OFF//##################################################################// ENTER IDLE mode SettingSet_LCD_8B_REG(0x18,0x34); //I/P_RADJ,N/P_RADJ, IDLE mode 55HzSet_LCD_8B_REG(0x2F,0x11); //IDLE mode line inversionSet_LCD_8B_REG(0x01,0x04); //IDLE='1' , enter IDLE mode// EXIT IDLE mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode line inversionSet_LCD_8B_REG(0x01,0x00); //IDLE='0', EXIT IDLE mode//##################################################################// ENTER Partial mode Setting 32lineSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ Partial mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Partial mode line inversionSet_LCD_8B_REG(0x01,0x01); //PTL='1', Enter Partial modeSet_LCD_8B_REG(0x0A,0x00); //PSL[15:8]=0x00Set_LCD_8B_REG(0x0B,0x20); //PSL[7:0]=0x20Set_LCD_8B_REG(0x0C,0x00); //PEL[15:8]=0x00Set_LCD_8B_REG(0x0D,0x47); //PEL[7:0]=0x47Set_LCD_8B_REG(0x26,0x01); //refresh cycle=5frame// EXIT Partial mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode, line inversionSet_LCD_8B_REG(0x01,0x00); //PTL='0', EXIT Partial mode//##################################################################// ENTER Partial + IDLE mode Setting 32lineSet_LCD_8B_REG(0x18,0x34); //I/P_RADJ,N/P_RADJ, Partial mode 55HzSet_LCD_8B_REG(0x2F,0x11); // Partial + IDLE mode line inversionSet_LCD_8B_REG(0x01,0x09); // PTL='1' IDLE=’1’, Enter Partial + IDLE modeSet_LCD_8B_REG(0x0A,0x00); //PSL[15:8]=0x00Set_LCD_8B_REG(0x0B,0x20); //PSL[7:0]=0x20Set_LCD_8B_REG(0x0C,0x00); //PEL[15:8]=0x00Set_LCD_8B_REG(0x0D,0x47); //PEL[7:0]=0x47Set_LCD_8B_REG(0x26,0x01); //refresh cycle=5frame// EXIT Partial + IDLE mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ ,Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode, line inversionSet_LCD_8B_REG(0x01,0x00); // PTL='0' IDLE=’0’, EXIT Partial + IDLE mode//##################################################################// Enter Sleep mode SettingSet_LCD_8B_REG(0x28,0x38); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);// Exit Sleep mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3F); //GON=1, DTE=1, D=1100//##################################################################// Enter Deep Sleep mode SettingSet_LCD_8B_REG(0x28,0x38); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);Set_LCD_8B_REG(0x01,0xC0); //DP_STB[1:0]=’11’// Exit Deep Sleep mode SettingSet_LCD_8B_REG(0x01,0x00); //DP_STB='0', out deep sleepDelayX1ms(10);Set_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3F); //GON=1, DTE=1, D=1100WR_8B_FORMAT(0x22); //Start GRAM write1.1-3 CMO2.0” 2.2” 2.4” 2.8” Reference FPC CircuitR S /C S V C ITitle Size Document NumberRev Date:SheetofDriv er IC ：HIMAX HX 8347DA01CMO 2.0" FPC Rev A01B 11Wednesday , October 08, 2008C081u/10VNOTES 2：Set IFSEL="0"；Register-content interface mode. -V P P _O T P11-C041u/10VNOTES 3：Set IM3~IM0="1000"；80 system 18bit type I interface.NOTES 1：Set IOVCC=2.8V(1.65~3.3V);VCI=2.8V(2.5~3.3V)C051u/10V0V C O M SDA,SCL,RS V P P _O T PD B 4/C S T EVPP_OTP IM3D B 1TEIM2V C ID B 5IOVCCD B 3D B 2IM3IM2IM1VCOMIM0InterfaceValid Data bus 0000000010100011DB15-0DB7-0DB17-10, DB8-1DB17-101--ID SDA,SCL 000001011111010I O V C C DB17-0V C LDB17-0DB8-0DB17-98080 MCU 18 bits parallelG N DC091u/6.3VD B 15D B 13D B 16J1V c 1V c 2G N D 3V c c 4V c c 5R E S T 6D B 177D B 168D B 159D B 1410D B 1311D B 1212D B 1113D B 1014D B 915D B 816D B 717D B 618D B 519D B 420D B 321D B 222D B 123D B 024R D 25W R 26R S 27C S 28F L M 29G N D 30B L +31B L -32D B 11D B 17D B 12D B 14/RE S E T D B 9D B 8D B 6D B 10D B 7/R D /W R D B 0G N DT E R S IM08080 MCU 16-bits Parallel type II 8080 MCU 8-bits Parallel type II 3-WIRE SERIA L INTERFA CE 8080 MCU 9-bits Parallel type II8080 MCU 16-bits Parallel type I 8080 MCU 18-bits Parallel type II 8080 MCU 9-bits Parallel type I 4-WIRE SERIA L INTERFA CE 8080 MCU 8-bits Parallel type I 8080 MCU 18-bits Paralle type I C01 ( C11P/N )CapacitorRecommended spec.C02 ( C12P/N )(Optional)1uF / 6.3Volt.C03 ( DDVDH )C04 ( C21P/N )C05 ( C22P/N )C06 ( VGH )C07 ( VGL )C08 ( C31P/N )C09 ( VCL)C10 ( VDDD )1uF / 6.3Volt. 1uF / 10 Volt.1uF / 10 Volt.1uF / 10 Volt.1uF / 25 Volt.1uF / 16 Volt.1uF / 6.3 Volt.1uF / 6.3 Volt.1uF / 6.3 Volt.C O G 1C O G 2C A B C _P W M O U TO G 1COG1C O G 2COG2C A B C _P W M O U TCABC_PWMOUTV G HC061u/25VIM1V G LC071u/16VT ED B 0D B 1D B 2D B 4D B 3D B 6D B 5D B 8D B 7D B 10D B 9D B 12D B 11D B 14D B 13CMO PanelV C O M 2C O G 13C O G 24C 21P 5C 21N 6C 22P 7C 22N 8V G H 9V G H 10D U M M Y 11V G L 12V G L 13V T E S T 14C A B C _P W M O U T 15V C L 16V C L 17C 31P 18C 31P 19C 31N 20C 31N 21V P P _O T P 22V P P _O T P 23V S S D 24V S S D 25V S S C 26V S S C 27V S S C 28V S S A 29V S S A 30V S S A 31V S S A 32V S S A 33V C I 34V C I 35D N C _S C L 36N C S 37V S Y N C 38H S Y N C 39D O T C L K 40D E 41N R E S E T 42N R D 43N W R _S C L 44I M 345I M 246I M 147I M 048S D A 49D B 1750D B 1651D B 1552T E S T 953D B 1454D B 1355T E S T 856D B 1257D B 1158T E S T 759D B 1060D B 961T E S T 662D B 863D B 764T E S T 565D B 666D B 567T E S T 468D B 469D B 370T E S T 371D B 272D B 173D B 074T E 75C A B C _P W M _O U T 76O S C 77I O V C C 78I O V C C 79V D D D 80V D D D 81V D D D 82V D D D 83V D D D 84V D D D 85C 12P 86C 12P 87C 12N 88C 12N 89C 11P 90C 11P 91C 11N 92C 11N 93D D V D H 94V C O M 1D D V D H 95V R E G 196I F S E L 97V C O M L _D U M 98V C O M H _D U M 99R C M 0100R C M 1101S R G B 102S M X 103S M Y 104V C O M _D U M 105V C O M _D U M106D D V D HC031u/10VC011u/6.3VC021u/6.3V (open)V D D DC101u/6.3VI O V C CD B 16D B 15D B 17I M 3I M 2I M 1I M 0/W R /R D /R E S E T1.1-4 Initial Code for CMO2.0”//##################################################################.M51_WR_REG(U05_LCD_POWER_ON, 0x0F); //VCI & IOVCC ONDelayX1ms(10);//RESETM51_WR_REG(U05_LCD_RST, 0x01); // LCD HW RST Enable DelayX1ms(5);M51_WR_REG(U05_LCD_RST, 0x00); // LCD HW RST Disable.DelayX1ms(10);//Driving ability SettingSet_LCD_8B_REG(0xEA,0x00); //PTBA[15:8]Set_LCD_8B_REG(0xEB,0x20); //PTBA[7:0]Set_LCD_8B_REG(0xEC,0x0C); //STBA[15:8]Set_LCD_8B_REG(0xED,0xC4); //STBA[7:0]Set_LCD_8B_REG(0xE8,0x40); //OPON[7:0]Set_LCD_8B_REG(0xE9,0x38); //OPON1[7:0]Set_LCD_8B_REG(0xF1,0x01); //OTPS1BSet_LCD_8B_REG(0xF2,0x10); //GENSet_LCD_8B_REG(0x27,0xA3); ////Gamma 2.2 SettingSet_LCD_8B_REG(0x40,0x00); //Set_LCD_8B_REG(0x41,0x00); //Set_LCD_8B_REG(0x42,0x01); //Set_LCD_8B_REG(0x43,0x12); //Set_LCD_8B_REG(0x44,0x10); //Set_LCD_8B_REG(0x45,0x26); //Set_LCD_8B_REG(0x46,0x08); //Set_LCD_8B_REG(0x47,0x54); //Set_LCD_8B_REG(0x48,0x02); //Set_LCD_8B_REG(0x49,0x15); //Set_LCD_8B_REG(0x4A,0x19); //Set_LCD_8B_REG(0x4B,0x19); //Set_LCD_8B_REG(0x4C,0x16); //Set_LCD_8B_REG(0x50,0x19); //Set_LCD_8B_REG(0x51,0x2F); //Set_LCD_8B_REG(0x52,0x2D); //Set_LCD_8B_REG(0x53,0x3E); //Set_LCD_8B_REG(0x55,0x3F); //Set_LCD_8B_REG(0x56,0x2B); //Set_LCD_8B_REG(0x57,0x77); //Set_LCD_8B_REG(0x58,0x09); //Set_LCD_8B_REG(0x59,0x06); //Set_LCD_8B_REG(0x5A,0x06); //Set_LCD_8B_REG(0x5B,0x0A); //Set_LCD_8B_REG(0x5C,0x1D); //Set_LCD_8B_REG(0x5D,0xCC); ////Power Voltage SettingSet_LCD_8B_REG(0x1B,0x1B); //VRH=4.65VSet_LCD_8B_REG(0x1A,0x01); //BT (VGH~15V,VGL~-10V,DDVDH~5V)Set_LCD_8B_REG(0x24,0x2F); //VMH(VCOM High voltage ~3.2V)Set_LCD_8B_REG(0x25,0x57); //VML(VCOM Low voltage -1.2V)//****VCOM offset**///Set_LCD_8B_REG(0x23,0x79); //for Flicker adjust //can reload from OTP//Power on SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x01,0x00); //DP_STB='0', out deep sleepSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);//262k/65k color selectionSet_LCD_8B_REG(0x17,0x06); //default 0x06 262k color // 0x05 65k color//SET PANELSet_LCD_8B_REG(0x36,0x00); //SS_P, GS_P,REV_P,BGR_P//Display ON SettingSet_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3C); //GON=1, DTE=1, D=1100//Set GRAM AreaSet_LCD_8B_REG(0x02,0x00);Set_LCD_8B_REG(0x03,0x00); //Column StartSet_LCD_8B_REG(0x04,0x00);Set_LCD_8B_REG(0x05,0xEF); //Column EndSet_LCD_8B_REG(0x06,0x00);Set_LCD_8B_REG(0x07,0x00); //Row StartSet_LCD_8B_REG(0x08,0x01);Set_LCD_8B_REG(0x09,0x3F); //Row EndWR_8B_FORMAT(0x22); //Start GRAM write//##################################################################// Power Off SettingSet_LCD_8B_REG(0x28,0x38); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);M51_WR_REG(U05_LCD_POWER_ON, 0x00); //VCI & IOVCC OFF//##################################################################// ENTER IDLE mode SettingSet_LCD_8B_REG(0x18,0x34); //I/P_RADJ,N/P_RADJ, IDLE mode 55HzSet_LCD_8B_REG(0x2F,0x11); //IDLE mode line inversionSet_LCD_8B_REG(0x01,0x04); //IDLE='1' , enter IDLE mode// EXIT IDLE mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode line inversionSet_LCD_8B_REG(0x01,0x00); //IDLE='0', EXIT IDLE mode//##################################################################// ENTER Partial mode Setting 32lineSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ Partial mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Partial mode line inversionSet_LCD_8B_REG(0x01,0x01); //PTL='1', Enter Partial modeSet_LCD_8B_REG(0x0A,0x00); //PSL[15:8]=0x00Set_LCD_8B_REG(0x0B,0x20); //PSL[7:0]=0x20Set_LCD_8B_REG(0x0C,0x00); //PEL[15:8]=0x00Set_LCD_8B_REG(0x0D,0x47); //PEL[7:0]=0x47Set_LCD_8B_REG(0x26,0x01); //refresh cycle=5frame// EXIT Partial mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode, line inversionSet_LCD_8B_REG(0x01,0x00); //PTL='0', EXIT Partial mode//##################################################################// ENTER Partial + IDLE mode Setting 32lineSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Partial mode 55HzSet_LCD_8B_REG(0x2F,0x11); // Partial + IDLE mode line inversionSet_LCD_8B_REG(0x01,0x09); // PTL='1' IDLE=’1’, Enter Partial + IDLE modeSet_LCD_8B_REG(0x0A,0x00); //PSL[15:8]=0x00Set_LCD_8B_REG(0x0B,0x20); //PSL[7:0]=0x20Set_LCD_8B_REG(0x0C,0x00); //PEL[15:8]=0x00Set_LCD_8B_REG(0x0D,0x47); //PEL[7:0]=0x47Set_LCD_8B_REG(0x26,0x01); //refresh cycle=5frame// EXIT Partial + IDLE mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ ,Normal mode 75HzSet_LCD_8B_REG(0x2F,0x11); //Normal mode, line inversionSet_LCD_8B_REG(0x01,0x00); // PTL='0' IDLE=’0’, EXIT Partial + IDLE mode//##################################################################// Enter Sleep mode SettingSet_LCD_8B_REG(0x28,0xB8); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);// Exit Sleep mode SettingSet_LCD_8B_REG(0x18,0x36); //I/P_RADJ,N/P_RADJ, Normal mode 75HzSet_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3F); //GON=1, DTE=1, D=1100//##################################################################// Enter Deep Sleep mode SettingSet_LCD_8B_REG(0x28,0xB8); //GON=’1’ DTE=’1’ D[1:0]=’10’DelayX1ms(40);Set_LCD_8B_REG(0x1F,0x89); // GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=1 DelayX1ms(40);Set_LCD_8B_REG(0x28,0x04); //GON=’0’ DTE=’0’ D[1:0]=’01’DelayX1ms(40);Set_LCD_8B_REG(0x19,0x00); //OSC_EN=’0’DelayX1ms(5);Set_LCD_8B_REG(0x01,0xC0); //DP_STB[1:0]=’11’// Exit Deep Sleep mode SettingSet_LCD_8B_REG(0x01,0x00); //DP_STB='0', out deep sleepDelayX1ms(10);Set_LCD_8B_REG(0x19,0x01); //OSC_EN='1', start OscSet_LCD_8B_REG(0x1F,0x88);// GAS=1, VOMG=00, PON=0, DK=1, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x80);// GAS=1, VOMG=00, PON=0, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0x90);// GAS=1, VOMG=00, PON=1, DK=0, XDK=0, DVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x1F,0xD0);// GAS=1, VOMG=10, PON=1, DK=0, XDK=0, DDVDH_TRI=0, STB=0 DelayX1ms(5);Set_LCD_8B_REG(0x28,0x38); //GON=1, DTE=1, D=1000DelayX1ms(40);Set_LCD_8B_REG(0x28,0x3F); //GON=1, DTE=1, D=1100WR_8B_FORMAT(0x22); //Start GRAM write。