D3430 MSDS

MATERIAL SAFETY DATA SHEETDate Revised : N/A•iFirst Issue•jDate Prepared: 6/2/2006SECTION 1.CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name •F D3430 (Heat sensitive double sided tape)Manufacturer : Sony Chemical •• Information Device CorporationAddress :12-3 Satsuki-cho, Kanuma-city, Tochigi-Pref. 322-8502 JapanPhone Fax81-289-76-0225 81-289-76-0299Emergency phone81-289-76-0918SECTION POSITION / INFORMATION ON INGREDIENTS Structure (Thickness and wt.% of each structure)‚P. Release liner (inside) 115 ƒÊm (65%)2. Adhesive 35 ƒÊm (14%)3. Release liner (outside) 38 ƒÊm (2‚P%)Components (% Chemical component by WT.)‚P. Release liner (inside)Non-hazardous composition CAS # Content Glassine paper coated with N/A 100%silicone release agent2. AdhesiveHazardous composition CAS# ContentEpoxy resins Trade Secret 10•`20 %Cross-linking system Trade Secret 5•`10 %Non-hazardous composition CAS # ContentAcrylic elastomer Trade Secret 70•`80 %3. Release liner (outside)Non-hazardous composition CAS # Content PET film coated with 25038-59-9 100%S i l i c o n e Release Agent •ias PET•j(Refer to section 8•jSECTION 3. HAZARDS IDENTIFICATIONEmergency overviewHarmful fumes and gases may be released when product is heated.Don’t inhale the fume and gases by using suitable ventilation system.Potential health effectsSkin/Eyes contactDirect contact to adhesive layer may cause irritation and skin sensitization.Ingestion/InhalationAs supplied, product is a solid material and would not in practice, be inhaled and beingested.Chronic effects/CarcinogenicityNone has known as product.SECTION 4. FIRST AID MEASURESInhalationAs supplied, product is a solid material and would not in practice, be inhaled.Eye contactIn case of contact with eyes, rinse immediately with plenty of water. If irritationpersists, seek medical attention.Skin contactFlush with large amounts of water. Use soap if available. If irritation persists, seekmedical attention.IngestionAs supplied, product is a solid material and would not in practice be ingested. SECTION 5. FIRE-FIGHTING MEASURESFlash point and autoignition temperatureFlash point : No dataAutoignition temperature : No dataExtinguish mediaWater spray, Carbon dioxide, Dry chemical powder or Foam.Fire fighting instructionWear positive pressure, self-contained breathing apparatus and protective clothing toprevent contact with skin and eyes.Evacuate area and fight fire from a safe distance.Flammable productsSECTION 6. ACCIDENTAL RELEASE MEASURESAs supplied, product is a solid material and would not in practice be released SECTION 7.HANDLING AND STORAGEHandlingDon’t contact directly to the adhesive face without wearing protective gloves.When product is heated, handle it in a well-ventilated area not to inhale the vapor.StorageStore in a cool, dry location away from strong acids and strong oxidizing agents. SECTION 8. EXPOSURE CONTROLS, PERSONAL PROTECTION Engineering controlsSuitable ventilating equipment should be installed at working area where product isheated and pressed.Personal protectionProtective gloves: Wear appropriate gloves to prevent direct contact, because of irritation.Protective glasses: Suitable safety glasses is recommended not to injure eyes by edges of the sheet.Exposure guidelineNo data as productSECTION 9.PHYSICAL AND CHEMICAL PROPERTIESAppearance : Tan colored adhesive tapeOdor : OdorlessBoiling point : Not applicableVapor pressure : Not applicableMelting point : Not determinedSolubility in water : Insoluble in waterSpecific gravity : Not availableSECTION 10. STABILITY AND REACTIVITYStabilityStable under normal handling conditions.IncompatibilityStrong acids and strong oxidizing agents.Hazardous decomposition productsCarbon monoxide, Carbon dioxide, Nitrogen oxides.Hazardous polymerizationIt will not occur.SECTION 11.TOXICOLOGICAL INFORMATIONNo data as productAs epoxy resinsAcute effectsIrritant, Skin sensitizationChronic effectsUnknownTarget organUnknownToxicity dataORL-RAT LD50> 2000 mg/KgSKN-RBT LD50> 2000 mg/KgSECTION 12.ECOLOGICAL INFORMATIONEcotoxicological informationUnknownChemical fate informationUnknownSECTION 13.DISPOSAL CONSIDERATIONSComply with all federal, state and local regulations.SECTION 14.TRANSPORT INFORMATIONUN NO. : Not listedInternational classification : Not relevantSECTION 15. REGULATORY INFORMATIONCarcinogenicity informationThis product doesn’t contain greater than 0.1% of any materials listed as carcinogenic by OSHA, NTP or IARC.SECTION 16.OTHER INFORMATIONReferenceMSDS of each component issued by material makers.The information herein is the best of our knowledge and is only related to this specific product.No warranty, either expressed or implied, is made with respect to such information. The recommended handling procedures are believed to be generally applicable. However, it is user’s responsibility to review these recommendations in the specific content of the intended use. We reserve the right to revise this MSDS as new information become available. It is recommended to ask for the latest version to our sales division.End of MSDS。