20010WS-09000中文资料
QC080000标准-中文版
QC080000标准-中文版___（IEC）制定了IEC质量评价系统（IECQ），用于评估电子电器器件和产品的质量。
其中，危险物品进程管理系统要求（HSPM）是其中的一个重要参考标准，其参考号为QC :2005.该标准要求企业建立和实施一套完整的危险物品进程管理系统，以确保产品的质量和安全性。
这套管理系统包括了供应链管理、生产过程控制、产品检验和测试、问题解决和持续改进等方面。
通过IECQ的评估，企业可以证明其危险物品进程管理系统符合QC 标准的要求，进而获得IECQ HSPM认证。
这不仅可以提升企业的品牌形象和市场竞争力，还可以降低产品质量问题和安全事故的风险，保障消费者的权益。
值得注意的是，IECQ HSPM认证并非一次性的，企业需要定期接受评估，以确保其管理系统的持续有效性和符合性。
此外，IECQ还提供了其他类型的质量评价系统，如可靠性评价系统（IECQ AP）、环境管理系统评价系统（IECQ EMS）等，以满足不同企业的需求。
___发布了电子电器器件及产品危险物品进程管理系统要求(HSPM)标准，旨在将标有害物标标品及制程与管理原标整合。
该标准是附加于ISO9001-2000版质量管理体制(QMS)架构中，通过完整、系统化及透明的流程管理及管制来达成HSF目标。
此文件基于EIA/ECCB标准954电子电器器件及产品无有害物质标准和要求，作为给制造商在履行HSF和用户要求的指导，其中可能包括规章要求，如欧洲议会的2002/95/EC指令要求和2003年1月27日委员会关于电气、电子设备中限制使用某些有害物质指令(RoHS)内的使用限制的要求，以及欧洲议会的2002/96/EC指令和2003年1月27日的委员会关于报废电子电器设备指令(WEEE)的要求。
需要注意的是，围绕世界范围一些审判的立法存在或者悬而未决，需要将一个特定的目录中指定的危害物质(HS)消除，包括铅，水银，镉，六价铬，多溴联苯(PBB)，以及来自产品大范围的多溴联苯醚(PBDE)。
芝加哥冰箱设备分公司1 ISO 9001-2000认证的冷却专业设备，型号：Solenoid Val
Solenoid ValVeType SV2, SV2aPort Size 1/2” to 1-1/4” (13-32 mm) Suitable For: ammonia, R-12, R-22, R-502 and other Common RefrigerantsFeaTuReS• Ductile Iron Body Strong, Compact • Pilot Operated • Manual Opening Stem • All Service From The Top• Maximum Opening Pressure Difference 20.7 bar (300 psig)• Design Pressure (MRP):31.0 bar (450 psig)• Pilot Light Available• Molded Class “H” Coil Construction • Teflon SeatdeSCRiPTionThis compact, heavy duty, pilot operated, ductile iron bodied solenoid valve is suitable for Ammonia, R 12, R 22, R 502, and other refrigerants, certain oils and other fluids approved for use in refrigeration. This valve may be opened by means of a manual opening stem for servicing or in case of an electrical power failure. The valve can be ordered with a close couple stainless steel screen strainer.Bulletin 30-06 ddecember 2007installation, Service, and Parts informationThe Type SV2 valve is available with an optional extension tube to raise the solenoid operator and coil housing assembly 50mm (2.0”) above the valve body to accommodate pipe Insulation. When this option Is desired, the Type SV2A solenoid valve should be specified.The Type SV2 and SV2A solenoid valves can be furnished with FPT: Internal NPT (U.S. Standard Taper Pipe Thread), Socket Weld, Weld Neck, or ODS (solders over copper tubing of given diameter) connections. The valves may be easily removed from between the flanges for servicing.PuRPoSeThe SV2 is a spring closing, normally closed solenoid valve. The SV2 is suitable for use in refrigerant liquid, hot gas or suction lines in a fluid temperature range of -45º to 121ºC (50º to 250ºF). Minimum pressure drop to hold valve open is .24 bar (3.5 psi).PRinCiPleS oF oPeRaTionThe Type SV2 is a pilot operated solenoid valve. The valve, In its closed position, with the solenoid coil de-energized and the disc and plunger assembly in its seated position, is shown In Figure 1. Electrical energization of the solenoid coil forms a magnetic field, pulling up the plunger and allowing the piston plug to lift off its seat. This permits flow of the trapped refrigerant from the top of the main valve plug. (Chamber A) which reduces pressure above the plug assembly. The main valve plug is then forced upward by the upstream pressure acting on it. This opens the valve port to allow flow through the valve.De-energization of the solenoid coil permits the spring assisted disc and plunger assembly to drop back to its seat, stopping the flow through the pilot port (port 13). The* For SV2A Add 56mm (2.2”)FiG. 2: SV2 DimensionsFiG 3. : SV2 Solenoid Valvepressure above and below the main valve plug assembly Is equalized, utilizing the closing spring, which forces the main valve plug assembly onto its seat , thus stopping flow through the valve.manual oPeninG STemThe manual opening stem on the Type SV2 is for the purpose of opening the valve without energizing the solenoid coil. Refer to the exploded view and the parts list for location of the stem and other related parts. For access to the stem, the seal cap on the bottom of the valve must be removed. This must be done with caution as refrigerant may be trapped inside the seal cap. Manual opening is accomplished by turning the stem clockwise until only the flats on the end of the stem protrude from the packing nut. To reset for automatic operation, turn the stem counter clockwise as far as it will go. Loosen packing nut before turning stem and re-tighten after turning stem.inSTallaTionProtect inside of valve from dirt, chips and moisture during Installation. Mount only In horizontal pipe line with solenoid coil at the top; this valve will work properly only in this position. In a liquid line, the Solenoid Valve should be near the expansion valve inlet. It is advisable to Install the RSF close coupled companion strainer ahead of the valve for protection against dirt and chips.The SV2 solenoid valve must be installed with the arrow on the valve body in the direction of flow through the valve. If the valve Is backwards, the flow will not be stopped when the valve is electrically de-energized. Like all Solenoid Valves, the SV2 can stop flow only In the direction from normal inlet to normal outlet (as shown by the arrow on the body). If reversal of pressure occurs in the system so the outlet pressure exceeds the Inlet pressure, the piston will be blown away from its seat and reverse flow will occur. If a system has this type of pressure reversal (as encountered during hot gas defrost with liquid recirculation systems) , a check valve such as Refrigerating Specialties Division Type CK4A in series with the solenoid valve will prevent flow reversal. (CK4A must be installed downstream to avoid trapping liquid.)eleCTRiCalThe Refrigerating Specialties Division molded water resistant Class “H” solenoid coil Is designed for long life and powerful opening force. The Class “H” coil construction will permit coil temperatures, as measured by resistance method, as high as 180ºC (365ºF). Final coil temperatures are a function of both fluid and ambient temperatures. The higher fluid temperatures require lower ambient temperatures so the maximum coil temperature is not exceeded. Conversely, low fluid temperatures permit higher ambient temperatures. The molded Class “H” coil is available from stock with most standard voltages. However, coils are available for other voltages and frequencies, as well as for direct current. Coils are also available as transformer type with a 6 volt secondary winding for use with the Refrigerating Specialties Division Pilot Light Assembly (see current copy of Bulletin 60 10, “Pilot Light Assembly and Solenoid Transformer Coil”). It is not recommended to mount the pilot light directly onto the coil housing.The solenoid coil must be connected to electrical lines with Volts and Hertz the same as specified on the coil assembly. The supply circuits must be properly sized to give adequate voltage at the coil leads even when other electrical equipment Is operating. The coil Is designed to operate at 15% under voltage. Operating with line voltageCoil Type Watt Rating and Volt Amperage Watts VAHolding VA InRushStandard AC CoilCoil Class ‘H’ 10.52337 Standard AC Coil with6v secondary pilot light 112638below the limit will result in lowering the valve opening pressure differential.SeRViCe PoinTeRSThe SV2 Solenoid Valve and Strainer are easily removable for cleaning or repairing. To remove valve and strainer, first manually open then pump out valve, unscrew the flange bolts and spread the flanges slightly apart.1. Failure To Open: (a) Coil Is of incorrect voltage. See“Electrical.” Check voltage specified on the coil assembly. (b) Line voltage Is abnormally low. See “Electrical.” Check line voltage at coil leads with a voltmeter. (c) Failure to electrically energize. Check control circuit. (d) Pressure difference across valve Is too high. The SV2 will open against a maximum pressure difference across the valve of 20.7 bar (300 psig). (e) Solenoid coil is burned out. See “Electrical,”and replace with proper coil. (f) Disc and Plunger Assembly Is sticking. To disassemble the valve for Inspection of internal parts (after pumping out the system as required), disconnect the power source to the solenoid coil, remove the Tube Assembly, lift out the Disc and Plunger Assembly, then remove the Piston Plug Retainer and Piston Plug Assembly. Remove the Top Cover and the Main Valve Plug Assembly. In any traces of dirt from these parts and using fine emery cloth remove any burrs if necessary. Thoroughly clean all parts and re-assemble applying a light film of refrigeration oil on the parts.2. Failure To Close:(a) Electrical control circuit is notopening properly. Check wiring and controls. (b) There are chips or dirt on the seat(s) preventing proper seating.Disassemble and clean valve as outlined In 1(f) above.If any of these parts need replacIng, It is advisable to replace them using a proper new replacement kit. (d) Piston is sticking. See 1(f) above. (e) Manual Opening Stem is turned all of the way or partly in holding Main Valve Plug Assembly open and permitting flow through valve.3. Leakage Through Valve: See (2) above.4.Overheating: The Solenoid Coil Is designed to operatehot and is constructed of high temperature materials accordingly. Unless troubled with actual coil burn outs, high coil temperature should be Ignored. Persistent burn outs Indicate improper line or coil voltage. See 1(e) above .SaFe oPeRaTion (See BulleTin RSBCV)People doing any work on a refrigeration system must be qualified and completely familiar with the system and the Refrigerating Specialties Division valves involved, or all other precautions will be meaningless. This includes reading and understanding pertinent Refrigerating Specialties Division product Bulletins and Safety Bulletin RSB prior to installation or servicing work.Where cold refrigerant liquid lines are used, it is necessary that certain precautions be taken to avoid damage that could result from liquid expansion. Temperature increase in a piping section full of solid liquid will cause high pressure due to the expanding liquid that can possibly rupture a gasket, pipe or valve. All hand valves isolating such sections should be marked, warning against accidental closing, and must not be closed until the liquid is removed. Check valves must never be installed upstream of solenoid valves, or regulators with electric shut-off, nor should hand valve upstream of solenoid valves or downstream of check valves be close until the liquid has been removed. It is advisable to properly install relief devices in any section where liquid expansion could take place.Avoid all piping or control arrangements that might produce thermal or pressure shock. For the protection of people and products, all refrigerant must be removed from the section to be worked on before a valve, strainer, or other device is opened or removed. Flanges with ODS connections are not suitable for ammonia service.WaRRanTyAll Refrigerating Specialties products are warranted against defects in workmanship and materials for a period of one (1) year from date of shipment from originating factory. This warranty is in force only when products are properly installed, field assembled, maintained, and operated in use and service as specifically stated in Refrigerating Specialties catalogs or bulletins for normal refrigeration applications, unless otherwise approved in writing by Refrigerating Specialties Division. Defective products or parts of returned to the factory with transportation charges prepaid and found to be defective by factory inspection will be replaced or repaired at Refrigerating Specialties option, free of charge F.O.B. factory. Warranty does not cover products that have been altered or repaired in the field, damaged in transit as a result of accidents, misuse, or abuse. Products disabled by dirt or other foreign substances will not be considered defective.THe exPReSS WARRAnTy AbOVe COnSTITuTeS THe OnLy WARRAnTy OF ReFRIgeRATIng SPeCIALTIeS PRODuCTS AnD IS In LIeu OF ALL OTHeR WARRAnTIeS, exPReSSeD OR ImPLIeD, WRITTen OR ORAL, InCLuDIng Any WARRAnTy OF meRCHAnTAbILITy OR WARRAnTy OF FITneSS FOR A PARTICuLAR PuRPOSe. In no event is Refrigerating Specialties responsible for any consequential damages of any nature whatsoever. No employee, agent, dealer or other person is authorized neither to give any warranties on behalf of Refrigerating Specialties nor to assume for Refrigerating Specialties any other liability in connection with any of it products.。
F1000-S
DVPN
MAC和IP绑定功能 透明防火墙 基于MAC的访问控制列表 支持802.1q VLAN 透传 邮件过滤 SMTP邮件地址过滤 邮件标题过滤 邮件内容过滤 邮件附件过滤 网页过滤 HTTP URL过滤 HTTP内容过滤 应用层过滤 Java Blocking ActiveX Blocking SQL注入攻击防范 用户行为流日志 NAT转换日志 攻击实时日志 黑名单日志 地址绑定日志 流量告警日志 流量统计和分析功能 全局/基于安全域连接数率监控 全局/基于安全域协议报文比例监控 安全事件统计功能 E-MAIL邮件实时告警功能 E-MAIL邮件定期信息发布功能 高可靠性 IP路由 网络协议 IP服务 网络互连 局域网协议 链路层协议
智能网络集成及QoS保证
●
Copyright©2006 杭州华为三康技术有限公司 保留一切权利
免责声明：虽然华为三康试图在本资料中提供准确的信息，但不保证本资料的内容不含有技术性误差或印刷性错误，为此华为三康对本资料中信息的准确性不承担任何责任。华为三康保留在没有任何通知或提示的情况下对本资料的内容进行修改的权利。
增强型状态安全过滤：支持基础、扩展和基于接口的状 态检测包过滤技术，支持按照时间段进行过滤；支持华 为3Com特有ASPF应用层报文过滤（Application Packet Specific Filter）协议，支持对每一个连接状态信息的维护
备注
－ 为选配
的坚实基础。
监测并动态地过滤数据包，支持对FTP、HTTP、SMTP、RTSP、
SecPath F100-E SecPoint & SecKey 移动办公用户
!
合作伙伴 认证及管 理服务器
SecPath F1000-S
实力专业用品-实力专业用品-实力专业用品说明书
7
DIN Adaptors
DIN Adaptor for RGS SSRs
Installation Instructions
Ordering Key
RGS1DIN
DIN rail adaptor module for mounting the RGS series on DIN rail.
Suffix H8 added to SSR part no. refers to factory mounted DIN clip. Conditions apply. Please ask your Sales representative for further details.
Ordering Key
Ordering Key
RGN - TERMRES
RGN-TERMRES termination resistor to be fitted on the last RG..N on the NRG bus chain. Packing qty. 4 pc.
Specifications are subject to change without notice (30.07.2019)
3-pin socket to mate with RM1E..V.. 4-pin socket to mate with RA2A..C 4-pin socket to mate with RA2A..C
5-pin socket to mate with RA..S 4-pin socket to mate with RKD2..C 2-pin socket to mate with RK2..C
Material Thermal resistance
2110S-AQ0030-AQ0120中文资料
40 Vdc maximum 15 Vdc maximum 5.5 Vdc maximum 8 to 28 Vdc 5 Vdc with 5V TTL level output Supply Current 30 mA typical, 50 mA maximum Current Sinking 250 mA maximum Output Duty Cycle 50/50 w/ +20% typical tolerance Tighter to +5% by spec Pulsed Outputs 5-10 µsec or 25-35 µsec Rise/Fall Times 1 µsec typical, other options available See Wiring Diagrams for Pin Outs
Optional Index Channel or Add. Encoder (Same types of Channel Outputs)
Order the Secondary Channel like a Primary Channel
元器件交易网
Hercules Encoders
Specifications
Mechanical
Shaft Speed Shaft Direction Standard Shaft Sizes (Dia.) Shaft Extension(s) Shaft Seals Mounting Bearings Radial Loading Axial Loading Accuracy Housing Weight Connector 6000 RPM maximum Bidirectional .2497", .3747" 0.80" with .50x.05" flat Neoprene or PTFE Options Refer to dimensional drawings ABEC 5 Shielded 30 lbs. Operating 15 lbs. Operating +0.1º of Shaft Rotation Typical Black Anodized Aluminum Standard: 14 oz., Sealed: 19 oz. 6 Pin MS3102 or 18" Cable Out
2000-2001 Oriental Motor General Catalog说明书
ORIENTAL MOTORGENERAL CATALOGFeatures·····························································B-258SC8800 · SC8800E·········································B-260SG8030J···························································B-264 Controllers for Stepping MotorsⅢTHE OPTIMAL CONTROLLER FOR STEPPING MOTORSThe SC and SG series of stepping motor controllers optimize the functions of the UPK •W , UPK ,UFK •W , PMU ,RFK , PMC , UMK and CSK series stepping motors and drivers.RS-232C Compatible Stepping Motor ControllerSC8800/SC8800EPage B-260The SC8800E is provided with encoder feedback capability.Controllers for Stepping MotorsThe SC Series The SG SeriesSC SeriesThe basic configuration of a stepping motor system that uses the SCseries controller is illustrated in the figure below.ⅢFEATURES1.Easy-To-Use•The instruction set software is built into the controller. No need for set-up diskettes.•Can operate stand-alone so that the unit can be programmed before installation into the machine.2.Programming Options•Can be controlled or programmed directly from a computer or ASCII terminal via a standard RS-232C interface.•Can be controlled by industry standard programmable logic controllers so it can run off any already existing PLC.3.Feedback CapabilitiesAvailable with an optional encoder input for position verification (model SC8800E ).4.Daisy-Chain CapabilitiesUp to 35 different axes can be controlled from one computer or ASCII terminal by daisy-chaining up to 35 SC8800or SC8800E indexers together.Compact & Simple ControllerSG8030Jpage B-264An ultra-compact controller that packs functions into a 1.89 in. (48mm) sq. package.SG SeriesThe basic configuration of a stepping motor and SG series controller is illustrated in the figure below.ⅢDIN Rail-Mount Model SG8030J-D ⅢPanel-Mount Model SG8030J-UⅢFEATURES1.Direct connection to a PLCThe external controller signal system can be directly connected to a programmable logic controller. Photocoupler isolation is used in the signal I/O circuit for complete electrical isolationbetween the programmable logic controller and the driver and to make the signal transfer very resistant to noise.2.Data can be set easily from the front panelData is simple to set by using key pads while viewing thesettings on the LED. Y ou can start setting data and operating the unit the day you receive it.RS232-C COMPATIBLE CONTROLLERSC8800SC8800EⅢFEATURESEasy-to-Use● The instruction set software is built into the controller. No need for set-up diskettes.● Can operate stand-alone so the unit can be programmed before installation into the machine.● Easy to learn instruction set. Allows for complete system operation.● End-of-travel and home position can be easily determined by the three dedicated limit switch inputs.● Operates on 10 to 28 VDC so the unit can be powered by a standard power supply.Programming Options● Can be controlled or programmed directly from a computer or ASCll terminal via a standard RS-232C port.● Can be controlled by industry-standard programmable logic controllers so it can run off any already existing PLC.● Linear, S-curve and parabolic acceleration/deceleration profiles are available.Flexible l/O● There are four programmable inputs and two programmable outputs to give the controller the ability to control other functions within the machine. All inputs and outputs are optically isolated.● Step and direction signal outputs are industry standard TTL Ievel signals in either 1-pulse or 2-pulse modes so theSC8800and the SC8800E can be used with any industry-standard stepping motor and driver package.● All I/O can be driven by an external DC power suppiy of 5 to 24VDC.Encoder Feedback Capabilities (Model SC8800E )● Nearly every known feedback device can be recognized since the indexer can use two or three channels in either single-ended or differential modes.Daisy-Chain Capabilities● Up to 35 different axes can be controlled from one computer or ASCII terminal by daisy-chaining up to 35 SC8800or SC8800E indexers together.● Available with an optional encoder input for position verification (model SC8800E ).ⅢSPECIFICATIONSEnvironmental Weight (Mass)MechanicalOutputsInputsNon-Volatile MemorySequence Execution Motion TypesPerformanceInput PowerProgramming Language Stepping Accuracy Velocity AccuracyVelocity Repeatability Position Range Velocity Range Acceleration Rate Absolute IndexContinuous Go Home Move Time Via RS232-CVia Power-up Auto Run Vla Programmable InputSequence Length Number of Programs Command InterfaceCW, CCW and Home LimitsProgrammable Inputs TIM EncoderStep and DirectionProgrammable StatusDimensions l/O Connectors Cooling MethodAmbient Temperature Range HumidityType Parameters Configuration10~28VDC 3.0 watts max. ϮO steps from preset total Ϯ0.05% of preset rate Ϯ0.01% of max. rateO to Ϯ999,999,999 steps, when DSCALE is active 1 to 800,000 steps/sec 0.001 to 10secMove to specified internal counter position Move specified distanceMove at specified speed until commanded to stop Move to Home limit switchMove specified distance in specified timeSequence may be executed from RS-232C interface with the RUN command Execute any sequence, 0~15 upon power-up Sequences may be selected using an external device Simple, high-level programming language 8k or up to available remaining memory 50 max. or up to available memoryRS232-C serial type, 3-wire implementation (Tx, Rx, Gnd) Baud rate fixed at 9600, 8 data bits, 1 stop bit, no parity35 units max. can be controlled via single port of daisy-chain configuration ϩ5 to ϩ30 VDC, Optically IsolatedFour to be used for machine interaction and/or sequence selection, +5 to ϩ30 VDC, Optically IsolatedPhase zero indicator, ϩ5 to ϩ30 VDC, Optically IsolatedModel SC8800E accepts 2-3 channel, 2-phase quadrature incremental encoders with differential or single ended outputs, 5 VDC TTL compatible, 400 kHz (quadrature), max.TTL, High: 4~5 VDC, Low: 0~0.5VDC, Pulse width: 0.5 ms min., Rise/Fall time: 0.2 ms max. Two, Open collector, 1~24VDC, 80mA max. Fault & Busy, Open collector, 1~24VDC, 80mA max.L 3.35 in. (85mm) ϫW 1.57 in. (40mm) ϫ H 4.72 in. (120mm) Combination of fixed screw terminal and D-type Natural Ventilation ϩ32˚F~ϩ122˚F (0˚C~ϩ50˚C)0 ~ 95% (noncondensing) 0.68 lb. (0.31 kg)PARAMETER VALUEⅢPROGRAMMING EXAMPLEOutputs 1 & 3 “ON ”StartV e l o c i t y V (H z )The two moves shown above can be executed with the following program commands :COMMANDS 1LOOP 102SAS Push START to begin 3VS700; V15004T A1; TD1.55PC0; EC06H ϩ7D65008MI9DELAY 110IF (CP!ϭ0)11THEN JMP112ELSE DELAY 313OUT ϭ10114V200015T416WHILE (IN 1ϭ0)17MC 18ENDW 19V2500; MC 20DELAY 521V120022DELAY 223STOP 24ENDL DESCRIPTIONLoop this program 10 times Echo message to screenSet start and run velocities for the first move Set Accel time to 1 sec & Decel time to 1.5 secSet position and encoder counters to zero Set direction to CWSet distance to 6500 steps Execute the Index move Delay 1 secondIf encoder position is incorrect,Then, restart program Else Delay 3 seconds Turn on Outputs 1 and 3Set velocity to 2000 steps/secSet Accel & Decel time to 4 sec. for second move While Input #1 is off,Move continuously End the while loopChange speed to 2500 steps/sec Delay 5 secondsChange speed to 1200 step/sec Delay 2 seconds Stop movingReturn to beginning of loopWhen start signal is input, program beginsⅢDIMENSIONS scale1/4, unit ϭinch (mm) SC8800SC8800EWeight 0.68lb. (Mass 0.31kg)ⅢSYSTEM LAYOUTThe SG8030J is a compact controller thatswitches between two control methods according to the application: sequential positioning and selective positioning.With sequential positioning mode, you execute up to four positioning control operations in the pre-determined sequence by just inputting the start command from the programmable controller.In selective positioning mode, positioning is controlled by selecting one of four sets ofpre-registered positioning data and inputting the start command from the programmable controller.Compact & Simple ControllerSG8030JⅢWIRING DIAGRAMⅢSIGNAL TABLE✽1The pulse output section uses a constant-current circuit, so no external resistor is required.Connect +5V power directly to the driver + terminals and connect the24V DC and 5V DC GND terminals the each other.✽2Use 24V DC home sensor.✽3This should be conductive (B contact) during normal operation.When not using the emergency stop input signal, always connect to the+24V terminal.The "E.StoP" message is displayed when the power supply goes off.✽4The names in angle brackets < > signals are for data selection postioning type.Signal names and functions of Sequential positioning type and Data selection positioning type differ in Pin No. 1, 10, 11 only.q When in the Sequential positioning typew When in the Data selection positioning type The names in angle brackets < > signals are for 2-pulse output.+.02ⅷSG8030J-DⅷSG8030J-UⅷDIN Rail Connection Socket P2CF-11 (included)ⅷPanel Mounting Hole DimensionsⅷSocket Mounting Hole DimensionsⅢDIMENSIONSscale1/4, unit ϭinch (mm)SG8030JWeight 0.22lb. (Mass 0.098kg)。
厦门市高新技术产品种类代码
厦门市高新技术产品种类代码（2OOO）电子信息代码产品名称0101 计算机及外部设备010101 计算机01010101 巨型计算机01010102 大中型计算机01010103 服务器01010104 工作站01010105 高档微型计算机01010106 便携式计算机01010107 数字仿真计算机01010108 工业控制机及控制器010102 计算机外部设备01010201 显示设备01010202 存储设备01010203 高档打印装置01010204 高性能电源01010205 其他新型计算机外围设备010103 计算机机板卡01010301 计算机通用板卡01010302 计算机数字信号处理板卡01010303 计算机与通信安全类板卡010104 计算机系统配套件01010401 计算机系统配套零、部件01010402 计算机系统配套用多种消耗品010105 计算机应用设备01010501 图形、图象处理设备01010502 文字、语音、图象识别设备01010503 电子金融有关设备01010504 IC卡、光卡、非接触卡及有关设备01010505 信息家电产品01010506 GPS接受设备及其综合应用系统01010507 金融数据加密机01010508 商用POS加密机01010509 IC卡鉴别机010106 计算机应用系统01010601 计算机经典应用系统01010602 激光照排设备及系统010107 网络联接类产品01010701 网络互换机01010702 集线器01010703 调制解调器MODEM01010704 网卡01010705 网关01010706 网闸01010707 网络终端设备01010708 网络接口适配器01010709 多协议通信适配器01010710 网络路由器01010711 网络检测设备01010712 其他网络系统专用设备010108 访问控制类产品01010801 网络隔离机（卡）01010802 防火墙设备01010803 内联网安全系统01010804 网络密码机01010805 局域网安全系统0102 微电子元器件010201 专用集成电路01020231 集成电路（IC）卡专用芯片01020232 高清晰度电视（HDTV）配套集成电路01020233 移动通讯配套集成电路01020234 多种嵌入式集成电路01020235 顾客自行开发旳专用集成电路（ASIC）01020236 专用系统集成电路01020237 通讯用电路01020238 厚、薄膜混合集成电路及消费类电路010202 通用集成电路01020231 存储器01020232 门阵列01020233 数字信号处理电路01020234 超高速电路01020235 放大器010203 特殊导体器件及电路01020301 电力电子器件01020302 变频技术应用模块01020303 微波器件及电路010301 光通讯元器件01030101 掺铒光纤放大器01030102 光滤波器和隔离器010302 图像传感器01030201 CCD光电荷耦合二极管及其组件01030202 碲镉汞（MCT）红外探测器01030203 CMOS图像传感器010303 视盘机和盘片01030301 光盘盘片01030302 DVD视盘机和驱动器光头010304 显示屏件01030401 液晶平面显示屏（LCD）及其配套部件和材料01030402 彩色显像管和彩色显示管01030403 HDTV彩色显像管及其材料和部件01030404 其他新型平面显示屏01030405 发光二极管（LED）010305 激光器01030501 中、大功率激光器01030502 光通信用激光器010306 片式元器件01030601 片式电阻01030602 片式电容01030603 片式电感01030604 片式半导体器件01030605 其他片式元器件010307 发光二极管01030701 LED超大屏幕显示屏0104 广播电视技术产品010401 广播电视节目制作播出设备01040101 非线性编辑设备01040102 电视节目自动播出设备01040103 数字特技发生器01040104 数字视频切换台01040105 虚拟演播室制作设备01040106 调音台01040107 音频切换台01040108 图文电视制作和播出设备010402 广播电视发射设备01040201 数字电视广播发射机01040202 数字电视接受机01040203 数字电视复用器01040204 MMDS设备01040205 数字电视调制器01040206 电视制式转换器010403 广播电视接受设备01040301 平板数字电视接受机01040302 大屏幕液晶投影电视机01040303 数字电视有条件接受设备01040304 卫星数字电视综合接受解码器（IRD）01040305 机顶盒（STB）010404 有线电视设备（CATV）01040401 CATV QAM调制器01040402 VOD系统设备01040403 有线电视光学设备（光发射接受机等）010405 音频视频产品01040501 DVD刻录设备01040502 DVD播放设备01040503 CCD摄像机01040504 高保真音响设备010406 广播电视专用仪器01040601 MPEG码流分析仪01040602 数字电视编码器0105 （五）通讯设备及产品序号产品名称010501 互换设备01050101 大、中容量数字程控互换机01050102 移动通信用数字程控互换机01050103 异步转移模式宽带互换机010502 传播设备01050201 中、小容量数字微波接力通信系统01050202 SDH数字微波接力通信系统01050203 光端机01050204 SDH光纤传播系统01050205 卫星通信传播系统01050206 当地网传播系统010503 有线通信01050301 窄带综合业务数字网（N-ISDN）01050302 PCM脉码调制终端设备01050303 光纤传播旳波分复用设备010504 无线通信01050401 GSM蜂窝移动通信系统01050402 CDMA蜂窝移动通信系统01050403 GDMA第三代蜂窝移动通信系统01050404 微蜂窝无线通信系统01050405 窄带无线接入网（用于）01050406 宽带无线接入网01050407 集群通信系统（数字）010505 终端设备01050501 多媒体终端01050502 GSM移动通信01050503 CDMA移动通信01050504 无线接入网用旳01050505 高速机01050506 可视终端01050507 会议电视系统（含终端）01050508 双频、双模移动通信01050509 保密终端设备01050510 群路密码机系列01050511 同步X.25端到端数据密码机01050512 同步X.28端到端数据密码机01050513 数字无绳01050514 数字保密机01050515 保密机01050516 （超）短波数字话音保密机01050517 DDN线路密码机01050518 会议电视图像保密机010506 天线系统01050601 地球站用旳中、大型天线01050602 移动通信用智能天线01050603 交叉极化传播用微波天线010507 其他01050701 短消息系统01050702 智能小区（楼）系统01050703 商业互换网01050704 邮政用信函和包裹分拣机0106 （六）专用工艺生产设备及测试仪表序号产品名称010601 工艺制造设备01060101 全自动精密贴片机01060102 半自动精密印刷机01060103 全热风载流焊机01060104 SMT波峰焊机010602 集成电路和半导体器件制造设备01060201 分步反复光刻机01060202 单晶生产炉01060203 等离子体沉积和刻蚀设备01060204 离子注入设备01060205 化学气相沉积设备01060206 迅速热处理设备01060207 超纯水和超纯溶剂旳制备设备01060208 超高纯气体旳纯化设备01060209 集成电路、集成产品旳焊接封装设备01060210 化合物半导体旳外延生长设备010603 检测设备和仪器01060301 高速在线检测设备01060302 多芯片组装模块（MCM）旳测试技术01060303 各类敏感元器件旳检测设备01060304 构造化布线系统旳检测设备01060305 光通信计量和监测仪器01060306 GSM和CDMA制移动通信检测设备01060307 数字电路旳功能测试01060308 数字示波器01060309 频谱分析仪010604 机房设备01060401 计算机机房设备01060402 通信广播机房设备软件0201 （一）系统软件序号产品名称02023001 操作系统软件02023002 数据库管理系统02023003 网络及通信协议处理软件02023004 编译程序02023005 编辑加工软件02023006 固件02023007 设备驱动程序02023008 嵌入式软件02023009 其他系统软件0202 （二）支撑软件序号产品名称02023231 网络管理软件02023232 中文信息处理平台02023233 软件开发、评测平台02023234 计算机辅助类工具软件02023235 中间件软件02023236 地网管系统0203 （三）应用软件序号产品名称02030001 多媒体软件02030002 信息管理系统02030003 教育软件02030004 游戏软件02030005 仿真软件02030006 控制软件02030007 智能软件02030008 网络应用软件02030009 安全保密软件02030010 防杀病毒软件02030011 网络监控系统02030012 审记软件02030013 安全分析软件02030014 安全分析软件02030015 财务软件02030016 科学与工程计算软件02030017 备份软件02030018 其他应用软件航空航天0301 （一）航空器及配套产品序号产品名称030101 飞机03010101 客运机03010102 货运机03010103 客/货运送机03010104 教练机03010105 通用航空飞机03010106 超轻型飞机03010107 无机械动力飞机03010108 无人驾驶飞行器03010109 特种用途飞机03010110 飞机零部件030102 直升机03010201 运送直升机03010202 通用直升机03010203 特种直升机03010204 直升机零部件030103 其他航空器03010301 地（水）面效应飞机03010302 飞艇03010303 高级降落伞030104 航空发动机03010401 涡轮风扇发动机03010402 涡轮喷气发动机03010403 涡轮螺桨发动机03010404 涡轮轴发动机03010405 桨扇发动机03010406 航空辅助动力系统03010407 航空发动机零部件030105 机载设备03010501 飞行控制系统03010502 液压/气压/刹车系统03010503 飞机燃油系统03010504 空中加油系统03010505 环境控制系统03010506 弹射救生系统03010507 飞行管理系统03010508 雷达/探测系统03010509 导航系统03010510 通信系统03010511 显示、记录系统03010512 电子对抗系统03010513 电气系统03010514 发动机推进控制系统030106 机载武器系统03010601 特种机载装置0302 （二）航空地面设备序号产品名称030201 维护与修理产品03020231 飞机翻修或D级检修03020232 航空发动机翻修03020233 直升机及其动力装置翻修03020234 飞机、发动机构造重大加改装03020235 国产飞机上装用旳进口发动机和机载设备翻修03020236 装在进口飞机上旳国产零备件和材料030202 航空地面设备03020231 飞机维修船坞03020232 机载设备综合测试台03020233 贺驶员、客中乘务、机务等地面训练模拟器03020234 飞机液压检查净化设备03020235 航空化学产品03020236 跑道磨擦系数测试设备03020237 新光源助航灯光设备03020238 自动驱鸟设备03020239 机场电子设备03020230 机场信息网络系统03020231 飞机货品自动装卸系统03020232 行李自动分检系统03020233 燃油自动加油设备03020234 飞机空调车ACM03020235 农业航空作业装置03020236 航空地面试验设备03020237 飞行试验地面设备03020238 测试与计量设备03020239 航空仿真设备03020230 空中交通管制设备03020231 航空制造和材料专用设备030203 其他航空航天产品及其配套设备03020301 CRDIC系列探地雷达03020302 测量雷达03020303 红外光学测量雷达03020304 监视雷达03020305 交通管制雷达03020306 微波暗室设备0303 （三）运载火箭序号产品名称030301 运载火箭03030101 运载火箭030302 运载火箭构造系统03030201 运载火箭贮箱03030202 运载火箭承力壳段03030203 卫星整流罩03030204 卫星支架、分派器03030205 解锁、分离系统030303 运载火箭动力系统03030301 运载火箭发动机03030302 姿态控制发动机03030303 增压输送系统03030304 推进剂运用系统030304 运载火箭控制系统03030401 动力调谐陀螺平台03030402 惯性组合03030403 速率陀螺仪03030404 综合放大器03030405 数字计算机03030406 程序指令配电器03030407 伺服机构、舵机03030408 耗尽关机传感器030305 运载火箭外测安全系统03030501 应答机03030502 安全指令接受机03030503 引导信标机03030504 控制器及引爆、爆炸器03030505 激光合作目旳030306 运载火箭遥测系统03030601 发射机及天线03030602 遥测单元03030603 信号转接器03030604 多种变换器、传感器03030605 分频器03030606 加速度计030307 运载火箭电源系统03030701 运载火箭电源系统030308 运载火箭测试设备03030801 运载火箭控制系统单元检测设备03030802 运载火箭CAMAC测试系统03030803 运载火箭发动机地面检测设备03030804 运载火箭控制系统单仿真实时处理系统03030805 运载火箭外安系统地面检测设备03030806 运载火箭遥测系统检测设备030309 运载火箭试验设备03030901 发动机试车台03030902 运载火箭振动试验塔03030903 运载火箭力学及环境测试设备030310 运载火箭运送、吊装设备03031001 运载火箭运送设备03031002 推进剂运送车03031003 运载火箭吊装设备030311 运载火箭发射与控制设备03031101 发射塔架、发射台以及移动发射装置03031102 推进剂贮存加注系统设备03031103 地面发控系统设备03031104 地面瞄准设备、定位定向设备03031105 地面垂直度调整设备03031106 运载火箭跟踪、遥测及测控设备030312 其他运载火箭设备及其辅助设备03031201 其他运载火箭设备及其辅助设备0304 （四）航天器序号产品名称030401 航天器03040101 航天器030402 航天器构造与构造件03040201 航天器构造系统03040202 金属材料构造件03040203 非金属材料构造件030403 航天器热控系统03040301 航天器热控系统03040302 航天器热控系统组件及零部件030404 航天器压力控制系统03040401 航天器压力控制系统03040402 航天器压力控制系统组件及零部件030405 航天器总体电路03040501 航天器总体电路030406 航天器记录设备03040601 航天器记录设备030407 航天器综合测试设备03040701 航天器综合测试设备030408 航天器姿态及轨道控制系统03040801 姿态敏感器03040802 磁强计03040803 控制计算机03040804 气液动阀门、电磁阀、自锁阀030409 航天器推进系统03040901 姿态控制推力器、推进剂贮箱03040902 单组元肼、双组元液体推进器03040903 执行机构03040904 冷气（N2）推进系统0304010 航天器有效载荷03041001 通信广播有效载荷03041002 胶片型相机、CCD相机、红外相机、恒星相机03041003 微波辐射计、微波散射计、测高计03041004 微波遥感成像仪03041005 空间制冷设备03041006 其他有效载荷030411 航天器返回系统03041101 返回系统03041102 返回系统旳组件和部件030412 空间环境监测系统03041201 空间环境监测系统030413 航天器电源系统03041301 航天器电源系统03041302 航天器电源030414 航天器数管系统03041401 航天器数管系统030415 航天器测控系统03041501 应答机03041502 信标机03041503 GPS设备03041504 地面测控管理设备030416 飞船特有旳系统03041601 仪表照明系统03041602 应急救生系统03041603 其他系统和设备030417 其他航天器及设备03041701 其他航天器及设备030418 航天器旳应用系统03041801 卫星云图接受设备03041802 卫星导航定位系统03041803 卫星数据采集系统03041804 监测环境污染旳卫星系统03041805 空间搭载产品及设备03041806 VSAT网络管理系统0305 （五）其他特种火箭、探测火箭及其配套设备序号产品名称030501 对空火箭03050101 对空火箭030502 对空火箭动力系统03050201 对空火箭动力系统030503 对空火箭制导导引系统03050301 对空火箭制导导引系统03050302 对空火箭制导导引系统零部件030504 对空火箭控制系统03050401 对空火箭控制系统03050402 对空火箭控制系统零部件030505 对空火箭发控设备03050501 对空火箭发控设备03050502 对空火箭发控设备旳配套设备030506 箭上电源03050601 箭上电源030507 箭上引起器及其装置03050701 箭上引起器及其装置030508 其他对空火箭辅助装置03050801 其他对空火箭辅助装置030509 飞航式火箭03050901 飞航式火箭030510 飞航式火箭动力系统03051001 飞航式火箭动力系统030511 飞航式火箭控制系统03051101 飞航式火箭控制系统03051102 飞航式火箭控制系统零部件030512 飞航式火箭精确制导系统03051201 飞航式火箭精确制导系统03051202 飞航式火箭精确制导系统零部件030513 飞航式火箭发射控制设备03051301 飞航式火箭发射控制设备03051302 飞航式火箭发射控制设备零部件030514 飞航式火箭专用电源03051401 飞航式火箭专用电源030515 其他飞航式火箭辅助装置03051501 其他飞航式火箭辅助装置030516 探测火箭03051601 探测火箭03051602 探测火箭分系统03051603 探测火箭部件、组件及元器件030517 探测火箭发射支持和测量控制设备03051701 探测火箭发射支持和测量控制设备030518 其他探测火箭辅助设备03051801 其他探测火箭辅助设备光机电一体化0401 （一）自动化机械及设备序号产品名称040101 先进制造设备及装置04010101 立式加工中心04010102 卧式加工中心04010103 五面加工中心04010104 龙门式加工中心或龙门式卧式铣床04010105 箱体多工位镗铣加工中心04010106 虚拟轴加工中心或虚拟轴铣床04010107 虚拟轴坐标测量机04010108 数控超精密车床04010109 数控车铣中心04010110 数控精密车削中心04010111 超高速切削中心04010112 高速型数控铣床或数控仿形铣床04010113 数控超精密磨床04010114 高效深磨数控平面磨床04010115 数控高精度内/外圆磨床04010117 数控精密电火花成形机床04010118 数控低速走丝电火花线切割机04010119 数控弧齿锥齿轮铣齿机04010120 数控精密滚齿机或蜗杆砂轮磨齿机04010121 数控组合机床04010122 数控机械压力机04010123 数控板料折弯机04010124 数控剪板机04010125 板材无模多点成型压力机04010126 全自动金属带锯床超精密加工机床04010127 工业机器人或智能机器人04010128 迅速原型成形设备04010129 激光切割和薄钢板拼焊成套设备04010130 激光精密加工和蚀刻成套设备04010131 柔性制造单元（FMC）04010132 柔性制造系统（FMS）04010133 真空离子镀膜设备04010134 高速、超硬精密刀具04010135 数控系统04010136 数控伺服系统04010137 高精度二维伺服系统04010139 精密测量与在线检测仪器040102 物流机械04010201 机场行李输送系统04010202 直流传动矿井提高机04010203 自动化立体仓库040103 电气传动设备04010301 稀土永磁交流伺服电机及驱动装置04010302 步进电动机及控制系统04010303 高精度晶闸管直流调速器04010304 永磁无刷直流电动机04010305 调速永磁交流电动机04010306 直流斩波调压牵引装置04010307 交流调频调压牵引装置040104 印刷机械04010401 四开四色胶印机及自控系统040105 轻工、化工、纺织、包装机械04010501 离子膜电解槽04010502 实罐杀菌设备及自动控制04010503 电脑提花人造毛皮机04010504 洗衣机电脑程控器04010505 全自动流体包装设备04010506 溴化锂制冷设备04010507 透平压缩机04010508 磁悬浮轴承涡轮膨胀机04010509 超细粉碎设备（气流磨）04010510 新型电子时间继电器04010511 新型静电消除器04010512 大型无菌包装机04010513 横包卷烟机组04010514 模糊控制变频双转子压缩机04010515 模糊控制变频空调器04010516 全封闭干洗机04010517 带钢传播自动纠偏装置04010518 纺粘法非织造布生产线04010519 热轨（热风棉）非织造布生产线04010520 纺织片梭织机04010521 自动络筒机04010522 清梳联生产线04010523 喷气织机04010524 并条机04010525 BYD/BYE并条自调匀整系统04010526 超精过滤设备04010527 中频转杯纺纱机04010528 陶瓷过滤机04010529 卧式自动翻洗过滤机040106 治金设备04010601 钢包精炼成套设备04010602 可调控辊型四辊液压轧机04010603 方坯连铸机04010604 板坯连铸机04010605 薄板坯连铸连轧设备04010606 高精度带材轧机04010607 1420MM五机架冷连轧机04010608 超大型特厚板轧机04010609 无缝管热连轧机040107 橡塑机械04010701 全钢丝子午胎成形机04010702 新型热塑弹性体防水卷材成型设备04010703 塑料挤吹中空成型机040108 汽车关键零配件04010801 防抱死制运装置（ABS）04010802 汽车安全气囊及装置04010803 电子控制自动就速箱04010804 电子控制四轮驱动装置04010805 电动助力转向装置04010806 汽车车载诊断系统04010807 汽油发动机电控装置04010808 柴油发动机电控装置04010809 AG13电喷汽车发动机04010810 汽车座椅调角器04010811 厢式改装车、特种车辆04010812 汽车液力变矩器04010813 汽车空调器产品04010814 霍尔汽车点火系统04010815 汽车ABS传感器04010816 汽车车速传感器04010817 直流无刷电机04010818 汽车自动天线04010819 HE-II汽车行驶状态记录仪04010820 天然气汽车泄漏报警器04010821 代用燃料汽车转换装置04010822 汽车电子产品040109 工程机械04010901 大中型液压挖掘机040110 高性能机电基础件04011001 高压液压柱塞泵/马达04011002 高压液压阀04011003 高压整体式多路阀04011004 中高压变量叶片泵04011005 中高压齿轮轮泵04011006 低功率气动阀岛用控制阀04011007 高频电控气阀04011001 高压液压柱塞泵/马达04011008 智能气缸04011009 高性能橡塑密封件04011010 高温高压机械密封04011011 非接触式气膜密封04011012 高速铁路客车轴承04011013 轿车轴承04011014 低噪音轴承04011015 高速精密轴承04011016 中大型重载轴承04011017 汽车覆盖件模具04011018 多工位精密级进冲模04011019 复杂精密压铸模具04011020 大型精密塑料模具04011021 复杂精密锻模和冲模04011022 智能化塑壳断路器04011023 智能化柜式或抽屉式断路器04011024 自配合组合电器04011025 智能化配电与电控装置04011026 变频与逆变电源装置04011027 不停电电源（UPS）04011028 大型电解电源04011029 特种泵阀04011030 谐波减速设备040111 工业生产过程控制系统04011101 分散型控制系统（DCS）04011102 现场总线控制系统040112 监控设备及控制系统04011201 楼宇监控系统04011202 电力调度与管理自动化系统04011203 交通运送自动化监测与管理系统04011204 GPS汽车定位、监控报警、调度系统04011205 3YD-9无线电力负荷监控系统04011206 KJ-4煤矿安全检测综合管理系统040113 自动化电力设备04011301 变电站综合自动化妆置04011302 配电网综合自动化妆置04011303 水电站计算机监控装置04011304 水电站自动控制系统04011305 锅炉-汽机协调控制系统04011306 锅炉炉膛安全监控装置04011307 锅炉自控优化妆置04011308 汽轮机数字式电液调整系统04011309 新能源发电设备自动化妆置04011310 无功功率自动赔偿装置04011311 智能型高压设备04011312 智能型低压电器、智能型低压开关柜04011313 高压自动重叠器04011314 高压自动分段器040114 其他04011401 钨相对焊机04011402 罐身电阻焊自动线0402 （二）高性能、智能化仪器仪表序号产品名称040201 工业自动化仪表04020231 高精度红外测温仪表04020232 高精度数字测温仪表04020233 高精度压力、差压变送器04020235 涡旋流量计04020236 两相流量计04020237 质量流量计04020238 固体流量计04020239 数字运传燃气表、水表、电表04020230 大量程固体物位仪表04020231 非接触式物位仪表04020232 电子称量仪表04020233 电子车辆秤04020234 数字模拟信号混合输出旳智能化仪表04020235 现场总线智能仪表04020236 数字模拟混合输出仪表通讯模板04020237 现场总线仪表通讯模板04020238 现场总线计算机通讯模板04020239 电脑综合测井诊断仪04020230 金属伞环空测井仪04020231 电脑测深仪04020232 油井加热自控仪04020233 温度控制器04020234 数显读卡仪04020235 泄漏检测仪04020237 液位雷达04020238 油罐计量系统04020239 激光转速测量仪04020230 机器听诊器（JTQ-1）040202 分析仪器04020231 气相色谱仪04020232 液相色谱仪04020233 质谱仪04020234 色谱柱04020235 X射线衍射仪04020236 X射线萤光光谱仪04020237 工业色谱仪04020238 工业质谱仪04020239 工业酸度计04020230 工业用氧分析仪04020231 红外线气体分析仪04020232 红外线汽车尾气分析仪04020233 近红外光谱仪04020234 原子吸取分光光度计04020235 付里叶红外分光光度计04020236 光电直读光谱仪04020238 紫外分光光度计04020239 频率分析仪04020230 便携式振动分析仪040203 光学仪器04020301 高档生物显微镜04020302 激光扫描显微镜04020303 扫瞄隧道显微镜04020304 透射式电子显微镜04020305 扫瞄式电子显微镜04020306 光栅式万能工具显微镜04020307 激光比长仪04020308 激光器04020309 电子经纬仪04020310 激光测距仪、测向仪04020311 全站仪04020312 特殊光学零件040204 电工仪器仪表04020401 高可靠性感应式电度表04020402 大功率多功能电子式电度表04020403 自动抄表系统04020404 L、C、R自动测试仪04020405 高精度数字电压表04020406 高精度数字电流表040205 试验机04020501 电子式金属、非金属试验机04020502 电子液压万能试验机04020503 高频疲劳试验机04020504 工业X射线探伤机04020505 r射线无损探测仪04020506 磁粉探伤机04020507 汽车专用零部件力学性能测试设备04020508 高温蠕变试验机04020509 轮胎动平衡试验机04020510 轮胎均匀性试验机04020511 直线马达试验台04020512 通用数字仪表试验台040206 试验室仪器04020601 电子天平04020602 热分析天平04020603 电子枪镀膜机04020604 超、高速离心机04020605 综合校准系统040207 气象仪器04020701 能见度测试仪04020702 中、小型机场气象观测系统04020703 新型便携式温、湿、风向风速仪04020704 新型船用气象仪器040208 自动测试系统基础仪器04020801 VXI机箱和O槽控制器04020802 VXI总线各类卡式仪器04020803 带GP-IB总线接口旳各类台式仪器040209 传感器04020901 硅力敏传感器04020902 铂力阻04020903 高性能湿敏传感器04020904 高性能气敏传感器04020905 离子敏传感器04020906 光纤传感器04020907 路面传感器04020908 光电传感器04020909 溅射压力传感器040210 文化办公设备04021001 高性能单镜头反光摄影机04021002 全自动变焦摄影机04021003 数字式摄影机04021004 数字式复印机04021005 高性能电影摄影机生物、医药和医疗器械0501 （一）生物技术药物序号产品名称050101 防止制品05010101 基因工程乙型肝炎疫苗（酵母）05010102 CHO细胞基因工程乙型肝炎疫苗05010103 乙型脑炎活疫苗05010104 麻疹、风疹、腮腺炎联合疫苗05010105 白喉、百日咳、破伤风、乙肝四联制剂05010106 甲型肝炎减毒活疫苗05010107 液体剂型口服脊髓灰质炎病毒活疫苗05010108 伤寒VI多糖疫苗05010109 基因工程霍乱疫苗05010110 23价肺炎菌苗05010111 FSM-2117痢疾双价工程菌苗050102 基因工程药物05010201 重组人粒细胞生长因子（G-CSF）05010202 重组人巨噬细胞粒细胞生长因子（GM-CSF）05010203 重组人红细胞生长因子（EPO）05010204 重组人白细胞介素-2（IL-2）（包括原型和新型）05010205 重组人白细胞介素-11（IL-11）05010206 重组人表皮生长因子（EGF）05010207 重组人成纤维细胞生长因子（bFGF）05010208 重组人干扰素（包括a-1a、2a、2b、1b、r等多种亚型，注射用和外用多种剂型）05010209 重组人肿瘤坏死因子（TNF）05010210 重组人生长激素05010211 重组人胰岛素05010212 重组链泊酶05010213 重组葡激酶05010214 重组水蛭素单克隆抗体05010215 促肝细胞生长素05010216 神经细胞生长因子05010217 鼠抗人T淋巴细胞单克隆抗体05010218 鼠抗肿瘤有关抗原单克隆抗体05010219 鼠抗病毒抗原单克隆抗体05010220 单抗导向药物050103 血液制品05010301 静脉注射丙种球蛋白05010302 凝血因子VIII、IX05010303 凝血酶原复合物050104 基因治疗05010401 重组腺病毒P53抗癌因子050105 合成多肽药物05010501 人降钙素基因有关肽脂质体050106 核酸药物05010601 8-氯腺苷050107 诊断试剂05010701 丙型肝炎抗体检测试剂盒05010702 丙型肝炎抗原检测试剂盒05010703 常见病原体PCR诊断试盒05010704 胃癌免疫PCR血清诊断试剂盒05010705 艾滋病毒（HIV）1+2抗体检测试剂盒05010706 HIV1P24抗原检测试剂盒0502 （二）中药05020231 广西血竭05020232 培植牛黄05020233 人工麝香050202 中成药05020231 康莱特注射液05020232 肤疡散05020233 槐耳制剂05020234 蜂蜡素胶囊05020235 止喘灵注射液05020236 金水宝胶囊05020237 百令胶囊05020238 地奥心血良胶囊05020239 安胃疡胶囊05020230 香菇多糖注射液05020231 绞股蓝总甙片05020232 云芝糖肽胶囊05020233 威麦宁胶囊05020234 参芪扶正注射液05020235 得力生注射液05020236 苫黄注射液05020237 复方丹参滴丸05020238 藿香正气软胶囊05020239 新清宁片05020230 肝复乐片05020231 杏灵颗粒05020232 双黄连冻干粉针及片剂05020233 葛根苓连微丸05020234 补心气口服液05020235 滋心阴口服液05020236 心通口服液05020237 脑血康口服液05020238 茵栀黄口服液05020239 复方双花口服液05020230 癃清片05020231 脑安胶囊05020232 稳心颗粒0503 （二）化学药序号产品名称050301 心脑血管类化学药05030101 马来酸依那普利05030102 尼莫地平05030103 吲达帕胺05030104 盐酸莫雷西嗪05030105 奥扎格雷05030106 盐酸氟桂嗪05030107 米力农05030108 盐酸艾司洛尔05030109 盐酸塞利洛尔05030110 氨氯地平05030111 普伐他丁05030112 辛伐他丁05030113 赖诺普利05030114 硫氮卓酮05030115 噻氯匹定05030116 多沙唑嗪05030117 洛沙坦05030118 褐藻多糖硫酸酯05030119 低分子肝素制剂05030120 尿激酶05030121 蚓激酶05030122 蝮蛇溶栓酶050302 抗肿瘤类化学药05030201 安吖啶05030202 卡铂05030203 硫酸长春地辛05030204 甲异靛05030205 卡莫氟05030206 紫杉醇05030207 帕米磷酸二钠。
WSTM01说明书
WSTM 01 - Set水 – 饱和 – 温度 – 显示器CE 2003操 作 和 保 养 手 册Version 1.1序 列 号： 修改时间：北京英特诺曼过滤器有限公司北京市朝阳区光华路 12A 号 科伦大厦 A 座 1208 室 邮编：100020 Tel. +0086 (0)10/658 141-47 Fax. +0086 (0)10/658 141-51 Email: china@ .................. 25.03.2010INTERNORMEN Technology GmbH Friedensstraße 41 Germany – 68804 Altlußheim Tel. +49 (0) 6205/2094-0 Fax. +49 (0) 6205/2094-40 Email: info@ 目 录1.1.1 1.2页3安全说明不正确操作导致的危险………………………………………………………………….. 3 依照规定进行使用……………………………………………………………………….. 32.2.1 2.2首次运行4构造……………………………………………………………………………………….. 4 完成运转前的准备……………………………………………………………………….. 43.油饱和度的检测63.1 水在液压油中造成的影响……………………………………………………………….. 6 3.2 检测原理………………………………………………………………………………….. 6 3.3 检测过程………………………………………………………………………………….. 7 3.4 对 WSTM 01 中软件的操作…………………………………………………………….. 7 3.4.1 操作键………………………………………………………………………………… 7 3.4.2 菜单结构……………………………………………………………………………… 8 3.4.3 主菜单………………………………………………………………………………… 9 3.4.3.1 步骤……………………………………………………………………………….. 9 3.4.3.1.1 设置存储时间间隔…………………………………………………………… 9 3.4.3.1.2 选择油的型号………………………………………………………………...10 3.4.3.1.3 开始…………………………………………………………………………...10 3.4.3.2 数据管理………………………………………………………………………… 11 3.4.3.2.1 数据传输…………………………………………………………………….. 11 3.4.3.2.2 数据删除…………………………………………………………………….. 12 3.4.3.2.3 数据存储…………………………………………………………………….. 12 3.4.3.3 设置……………………………………………………………………………… 12 3.4.3.3.1 极限值的设置……………………………………………………………….. 13 3.4.3.3.2 时间的设置………………………………………………………………….. 13 3.4.3.3.3 温度格式的设置…………………………………………………………….. 14 3.4.3.3.4 标准值的设置……………………………………………………………….. 14 3.5 检测结果的分析利用…………………………………………………………………… 15 3.5.1 用%形式来显示饱和度...……………………………………………………………15 3.5.2 用 ppm 形式来显示水的含量……………………………………………………….16 3.6 数据传输和数据管理…………………………………………………………………… 174.4.1WSTM 01 的保养 WSTM 01- Set 标准值的设定19 18传感器的清洁…………………………………………………………………………… 195.5.1 5.2WSPS 03 -传感器……………………………………………………………………… 19 温度探测器的安装……………………………………………………………………… 196.6.1 6.2 6.2.1 6.2.2 6.3 6.4附录20技术数据………………………………………………………………………………… 20 连接说明.............................................................................................................. 21 WSPS 03 – 湿度传感器…………………………………………………………… 21 WSTM 01 – 显示装置……………………………………………………………… 22 适用范围—兼容性................................................................................................ 24 触点负载............................................................................................................... 247.排除故障2521.1.1安全说明不正确操作导致的危险WSTM 01 – Set 通过 IEC 1010-1/ EN 61010 – 1, Teil 1 标准的安全测试和验收，有着 电子和液压一体化的保护装置，能为在规定的使用范围内提供安全运行的保障。