ABB电机样本
ABB电机型大全
QABP系列变频调速电机：2P：QABP 71M2A,0.37KW-2P QABP 71M2B,0.55KW-2P QABP 80M2A,0.75KW-2P QABP 80M2B,1.1KW-2P QABP 90S2A,1.5KW-2P QABP 90L2A,2.2KW-2P QABP 100L2A,3KW-2P QABP 112M2A,4KW-2P QABP 132S2A,5.5KW-2P QABP 132S2B,7.5KW-2P QABP 160M2A,11KW-2P QABP 160M2B,15KW-2P QABP 160L2A,18.5KW-2P QABP 180M2A,22KW-2PQABP 200L2B,37KW-2P QABP 225M2A,45KW-2P QABP 250M2A,55KW-2P QABP 280S2A,75KW-2P QABP 280M2A,90KW-2P QABP 315S2A,110KW-2P QABP 315M2A,132KW-2P QABP 315L2A,160KW-2P QABP 315L2B,200KW-2P QABP 355M2A,250KW-2P QABP 355L2A,315KW-2P 4P：QABP 71M4A,0.25KW-4P QABP 71M4B,0.37KW-4P QABP 80M4A,0.55KW-4PQABP 90S4A,1.1KW-4P QABP 90L4A,1.5KW-4P QABP 100L4A,2.2KW-4P QABP 100L4B,3KW-4P QABP 112M4A,4KW-4P QABP 132S4A,5.5KW-4P QABP 132M4A,7.5KW-4P QABP 160M4A,11KW-4P QABP 160L4A,15KW-4P QABP 180M4A,18.5KW-4P QABP 180L4A,22KW-4P QABP 200L4A,30KW-4P QABP 225S4A,37KW-4P QABP 225M4A,45KW-4P QABP 250M4A,55KW-4PQABP 280M4A,90KW-4P QABP 315S4A,110KW-4P QABP 315M4A,132KW-4P QABP 315L4A,160KW-4P QABP 315L4B,200KW-4P QABP 355M4A,250KW-4P QABP 355L4A,315KW-4P 6P：QABP 71M6A,0.18KW-6P QABP 71M6B,0.25KW-6P QABP 80M6A,0.37KW-6P QABP 80M6B,0.55KW-6P QABP 90S6A,0.75KW-6P QABP 90L6A,1.1KW-6P QABP 100L6A,1.5KW-6PQABP 132S6A,3KW-6P QABP 132M6A,4KW-6P QABP 132M6B,5.5KW-6P QABP 160M6A,7.5KW-6P QABP 160L6A,11KW-6P QABP 180L6A,15KW-6P QABP 200L6A,18.5KW-6P QABP 200L6B,22KW-6P QABP 225M6A,30KW-6P QABP 250M6A,37KW-6P QABP 280S6A,45KW-6P QABP 280M6A,55KW-6P QABP 315S6A,75KW-6P QABP 315M6A,90KW-6P QABP 315L6A,110KW-6PQABP 355M6A,160KW-6P QABP 355M6B,200KW-6P QABP 355L6A,250KW-6P M2JA系列隔爆电机2P：M2JA 80M2A,0.75KW-2P M2JA 80M2B,1.1KW-2P M2JA 90S2A,1.5KW-2P M2JA 90L2A,2.2KW-2P M2JA 100L2A,3KW-2P M2JA 112M2A,4KW-2P M2JA 132S2A,5.5KW-2P M2JA 132S2B,7.5KW-2P M2JA 160M2A,11KW-2P M2JA 160M2B,15KW-2PM2JA 180M2A,22KW-2P M2JA 200L2A,30KW-2P M2JA 200L2B,37KW-2P M2JA 225M2A,45KW-2P M2JA 250M2A,55KW-2P M2JA 280S2A,75KW-2P M2JA 280M2A,90KW-2P M2JA 315S2A,110KW-2P M2JA 315M2A,132KW-2P M2JA 315L2A,160KW-2P M2JA 315L2B,200KW-2P M2JA 355M2A,250KW-2P M2JA 355L2A,315KW-2P 4P：M2JA 80M4A,0.55KW-4PM2JA 90S4A,1.1KW-4P M2JA 90L4A,1.5KW-4P M2JA 100L4A,2.2KW-4P M2JA 100L4B,3KW-4PM2JA 112M4A,4KW-4PM2JA 132S4A,5.5KW-4P M2JA 132M4A,7.5KW-4P M2JA 160M4A,11KW-4P M2JA 160L4A,15KW-4P M2JA 180M4A,18.5KW-4P M2JA 180L4A,22KW-4P M2JA 200L4A,30KW-4P M2JA 225S4A,37KW-4P M2JA 225M4A,45KW-4P M2JA 250M4A,55KW-4PM2JA 280M4A,90KW-4P M2JA 315S4A,110KW-4P M2JA 315M4A,132KW-4P M2JA 315L4A,160KW-4P M2JA 315L4B,200KW-4P M2JA 355M4A,250KW-4P M2JA 355L4A,315KW-4P QAEJ系列进口制动电机2P：QAEJ 71M2A,0.37KW-2P QAEJ 71M2B,0.55KW-2P QAEJ 80M2A,0.75KW-2P QAEJ 80M2B,1.1KW-2P QAEJ 90S2A,1.5KW-2P QAEJ 90L2A,2.2KW-2PQAEJ 100L2A,3KW-2P QAEJ 112M2A,4KW-2P QAEJ 132S2A,5.5KW-2P QAEJ 132S2B,7.5KW-2P QAEJ 160M2A,11KW-2P QAEJ 160M2B,15KW-2P QAEJ 160L2A,18.5KW-2P QAEJ 180M2A,22KW-2P QAEJ 200L2A,30KW-2P QAEJ 200L2B,37KW-2P QAEJ 225M2A,45KW-2P 4P：QAEJ 71M4A,0.25KW-4P QAEJ 71M4B,0.37KW-4P QAEJ 80M4A,0.55KW-4P QAEJ 80M4B,0.75KW-4PQAEJ 90L4A,1.5KW-4P QAEJ 100L4A,2.2KW-4P QAEJ 100L4B,3KW-4P QAEJ 112M4A,4KW-4P QAEJ 132S4A,5.5KW-4P QAEJ 132M4A,7.5KW-4P QAEJ 160M4A,11KW-4P QAEJ 160L4A,15KW-4P QAEJ 180M4A,18.5KW-4P QAEJ 180L4A,22KW-4P QAEJ 200L4A,30KW-4P QAEJ 225S4A,37KW-4P QAEJ 225M4A,45KW-4P 6P：QAEJ 71M6A,0.18KW-6PQAEJ 80M6A,0.37KW-6P QAEJ 80M6B,0.55KW-6P QAEJ 90S6A,0.75KW-6P QAEJ 90L6A,1.1KW-6P QAEJ 100L6A,1.5KW-6P QAEJ 112M6A,2.2KW-6P QAEJ 132S6A,3KW-6P QAEJ 132M6A,4KW-6P QAEJ 132M6B,5.5KW-6P QAEJ 160M6A,7.5KW-6P QAEJ 160L6A,11KW-6P QAEJ 180L6A,15KW-6P QAEJ 200L6A,18.5KW-6P QAEJ 200L6B,22KW-6P QAEJ 225M6A,30KW-6PMQAEJ系列进口制动电机2P：MQAEJ 71M2A,0.37KW-2P MQAEJ 71M2B,0.55KW-2P MQAEJ 80M2A,0.75KW-2P MQAEJ 80M2B,1.1KW-2P MQAEJ 90S2A,1.5KW-2P MQAEJ 90L2A,2.2KW-2P MQAEJ 100L2A,3KW-2P MQAEJ 112M2A,4KW-2P MQAEJ 132S2A,5.5KW-2P MQAEJ 132S2B,7.5KW-2P MQAEJ 160M2A,11KW-2P MQAEJ 160M2B,15KW-2P MQAEJ 160L2A,18.5KW-2P MQAEJ 180M2A,22KW-2PMQAEJ 200L2B,37KW-2P MQAEJ 225M2A,45KW-2P 4P：MQAEJ 71M4A,0.25KW-4P MQAEJ 71M4B,0.37KW-4P MQAEJ 80M4A,0.55KW-4P MQAEJ 80M4B,0.75KW-4P MQAEJ 90S4A,1.1KW-4P MQAEJ 90L4A,1.5KW-4P MQAEJ 100L4A,2.2KW-4P MQAEJ 100L4B,3KW-4P MQAEJ 112M4A,4KW-4P MQAEJ 132S4A,5.5KW-4P MQAEJ 132M4A,7.5KW-4P MQAEJ 160M4A,11KW-4PMQAEJ 180M4A,18.5KW-4P MQAEJ 180L4A,22KW-4P MQAEJ 200L4A,30KW-4P MQAEJ 225S4A,37KW-4P MQAEJ 225M4A,45KW-4P 6P：MQAEJ 71M6A,0.18KW-6P MQAEJ 71M6B,0.25KW-6P MQAEJ 80M6A,0.37KW-6P MQAEJ 80M6B,0.55KW-6P MQAEJ 90S6A,0.75KW-6P MQAEJ 90L6A,1.1KW-6P MQAEJ 100L6A,1.5KW-6P MQAEJ 112M6A,2.2KW-6P MQAEJ 132S6A,3KW-6PMQAEJ 132M6B,5.5KW-6P MQAEJ 160M6A,7.5KW-6P MQAEJ 160L6A,11KW-6P MQAEJ 180L6A,15KW-6P MQAEJ 200L6A,18.5KW-6P MQAEJ 200L6B,22KW-6P MQAEJ 225M6A,30KW-6P。
ABB电机样本
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
Ｆ：零二二－二七二三五七二二
Ｔ：零二二－二七二三三一二二 马利
ABB控制产品AF系列样本手册
11/0 1SXF101060C2002 |ABB|控制产品1概览1/2订货信息4 - 45 kW / 5 - 60 hpAF09 ... AF38 交/直流操作1/5AF09Z ... AF38Z 交/直流操作，低功耗1/6AF40 ... AF96 交/直流操作1/7主要附件1/855 - 200 kW / 75 - 300 hpAF116 ... AF146 交/直流操作，带1NO + 1NC辅助触点1/10AF190 ... AF370 交/直流操作，带1NO + 1NC辅助触点1/11主要附件1/12 200 - 560 kW / 300 - 900 hpAF400 ... AF750 交/直流操作，带1NO + 1NC辅助触点1/14AF1250 ... AF2650 交/直流操作，带1NO + 1NC辅助触点1/15主要附件1/16技术数据1/18端子标识和位置1/31主要尺寸1/34ABB|控制产品| 1SXF101060C2002 1/11用于控制电动机及电力线路IEC (1)AC-3 额定功率θ ≤ 60 °C (2), 400 V kW4 5.57.5111518.518.522303745UL/CSA 3 相电动机480 V hp57.5101520203040506060交/直流控制电压型号AF09AF12AF16AF26AF30AF38AF40AF52AF65AF80AF96IEC AC-3 额定工作电流θ ≤ 60 °C (2), 400 V A912182632384053658096 AC-1 额定工作电流θ ≤ 40 °C, 690 V A25283045505070100105125130UL/CSA一般应用的额定电流600 V A252830455050608090105115 NEMA NEMA 尺寸000—1——2——3—(1) 1000 V IEC额定参数，适用于AF146 ... AF2650接触器。
ABB_ACS_6000_技术样本
ACS 6000中压交流传动3 - 27 MVA同步电机和异步电机的速度和转矩控制技术样本3ABD 00010934 版本B中文BASED ON：3BHS132322 ZAB E01，Rev. B生效期：2003年2月©北京ABB电气传动公司版权所有ABB保留对该文件以及专利问题或其他工业保护产权限制的权利。
特别是冒用、仿冒和向第三方转让等行为是禁止的。
本文已经过仔细和认真的校对，然而错漏之处在所难免，用户一旦发现请立即与ABB联系。
ABB 的目标是追求最现代的科技标准，因此，本手册的内容可能会与实际产品稍有不同。
ACS 6000 技术样本目录第一章 - 概述111.1简介111.2应用领域111.3模块化设计121.4关键技术141.5技术优势151.6CE 标志17第二章 - 传动模式和应用192.1概述192.2ACS 6000 传动模式192.2.1单电机传动192.2.2多电机传动222.2.3冗余传动 232.2.4孪生传动 232.3应用实例242.3.1船舶主推进和辅推进系统传动242.3.2轧机应用282.3.3采矿业应用32第三章 - 关键技术353.1概述353.2直接转矩控制353.2.1DTC 原理353.2.2DTC性能363.3IGCT功率半导体器件383.4有源整流器单元393.4.1运行原理393.4.2控制原理403.4.3功率因数控制413.4.4优化的脉冲模式413.4.5控制框图413.5线性供电单元423.6公共直流母排423.6.1原理423.6.2优点43 ACS 6000 技术样本 1 / 165第四章 - 变频器配置和硬件454.1概述454.2模块化设计理念454.3配置指导474.3.1必要的应用数据474.3.2配置步骤474.3.3配置规则474.4柜体设计484.4.1机械设机484.4.2电磁兼容性（EMC）484.4.3安全方面494.5母排和接地494.6辅助电源系统504.6.1安全交流输入504.6.2直流安全输入514.6.3无安全输入524.7冷却系统53第五章 - 模块描述555.1概述555.2线性供电单元（LSU）555.2.1概述555.2.2主要元器件565.2.3电路图565.2.4型号规格575.3有源整流单元（ARU）575.3.1概述575.3.2主要元器件585.3.3电路图605.3.4型号规格605.4逆变单元（INU）605.4.1概述605.4.2电路图615.4.3型号规格615.5电容组单元（CBU）615.5.1概述615.5.2主要元器件625.5.3电路图635.5.4型号规格635.6终端单元（TEU）645.6.1概述645.6.2型号规格645.7控制单元（COU）65 2 / 165 ACS 6000 技术样本5.7.1概述655.7.2主要元器件665.7.3型号规格665.8水冷单元（WCU）675.8.1概述675.8.2主要元器件685.8.3水冷回路695.8.4冷却控制715.8.5型号规格725.9用户接口单元（CIU）725.9.1概述725.9.2主要元器件735.9.3接口图745.9.4型号规格745.10输入滤波单元（IFU）745.10.1概述745.10.2主要元器件755.10.3电路图755.10.4型号规格755.11电压限幅单元（VLU）755.11.1概述755.11.2主要元器件765.11.3电路图775.11.4型号规格775.12电阻制动单元（RBU）775.12.1概述775.12.2主要元器件785.12.3电路图795.12.4型号规格795.13制动斩波器单元（BCU）795.13.1概述795.13.2主要元器件805.13.3电路图805.13.4型号规格805.14隔离单元（ISU）815.14.1概述815.15励磁单元（EXU）815.15.1概述815.15.2励磁电路825.15.3主要元器件825.15.4电路图845.15.5型号规格84 ACS 6000 技术样本 3 / 165第六章 - 控制系统和过程接口856.1控制系统硬件856.1.1控制系统结构概述856.1.2AMC3 控制器866.1.3控制系统硬件拓扑876.2控制系统软件896.2.1控制系统软件结构896.2.2操作系统906.2.3电机和整流桥控制软件906.2.4故障处理器906.2.5主状态机916.2.6应用程序916.3用户界面926.3.1CDP 312 控制盘926.3.2按钮和指示灯936.3.3PC 工具936.4启动和停机顺序946.4.1本地控制和远程控制946.4.2启动顺序956.4.3停机顺序966.4.4紧急停机顺序986.5接口配置986.5.1概述986.5.2单传动 I/O配置986.5.3多传动 I/O配置996.6现场总线接口1016.6.1现场总线类型1016.6.2信号1016.7硬连接的过程 I/O 1046.7.1S800 I/O 模块1046.7.2信号1066.7.3标准信号1066.7.4带 CIW 1可选件的 I/O （标准软件）1086.7.5由AC80控制器控制的带 CIW 2可选件的 I/O （工程应用软件）110第七章 - 标准控制和保护功能1117.1概述1117.2电机控制功能1117.2.1速度控制特性1117.2.2直接转矩控制特性1127.3有源整流控制功能1137.4应用控制功能113 4 / 165 ACS 6000 技术样本7.4.1与电机相关的功能1137.4.2与电网相关的功能1147.5故障诊断1157.6标准保护功能1157.6.1概述1157.6.2内部保护功能1167.6.3外部保护功能1187.6.4手动激活的保护功能1197.7其它特性1207.8用户特定的可选件120第八章 - 可选件1218.1变频器硬件1218.2变频器软件1238.3服务和诊断1238.4船舶型版本1248.5运输、安装和调试1248.6培训1248.7测试1258.8资料文件125第九章 - 对系统设备的要求1279.1概述1279.2主回路断路器1279.2.1最大分断时间1279.2.2控制接口1279.2.3主回路断路器设备1289.2.4主回路断路器接线方案1299.3用于有源整流单元的主变压器1309.3.1变压器绕组1319.3.2技术数据1319.4用于线性供电单元的主变压器1329.4.1变压器绕组1329.4.2技术数据1329.5有源整流单元的同步变压器1339.5.1同步变压器的要求1339.5.2两种可行的连接方案1339.6励磁电源1349.7同步电机的要求1359.7.1绕组1359.7.2电机的一般特性1359.7.3编码器136 ACS 6000 技术样本 5 / 1659.7.4轴承1369.7.5励磁1369.8异步电机的要求1369.8.1绕组1369.8.2电机的一般特性1369.8.3编码器1379.8.4轴承1379.9功率电缆的选型1379.9.1功率电缆的选型1379.9.2用于 ARU 和 INU 的电缆1379.9.3用于 LSU的电缆1389.9.4用于 BCU的电缆1389.10控制电缆139第十章 - 安装指导14110.1空间要求14110.2结构要求14210.3机械安装14310.4功率电缆的安装、接地和屏蔽14410.4.1ARU 至主变压器的电缆连接14410.4.2LSU 至主变压器的电缆连接14510.4.3电机至逆变器的电缆连接14610.4.4设备接地147附录A - ACS 6000 技术数据149变频器输出/电机连接149ARU 输入150LSU 输入151辅助电源152EXU 电源153环境要求153降容输出154运输和储存154冷却154防护等级156语言157附录B - 适用规范和标准159概述159设计和制造遵循的国际标准159 6 / 165 ACS 6000 技术样本EMC 标准160船舶型 ACS 6000遵循的标准161附录C - ACS 6000 产品型号163产品型号的限制163 ACS 6000 技术样本7 / 1658 / 165 ACS 6000 技术样本缩写列表AC80 高级控制器AF100 高级现场总线协议（ABB 总线系统）AI 模拟输入AMC 应用及电机控制器AMCOS 应用及电机控制器操作系统AO 模拟输出ARU 有源整流单元ASE 抗饱和装置BCU 制动斩波单元BOD 钳位二级管CBU 电容组单元CCB 变频控制板CDP312 控制盘CHU 充电单元CIU 用户接口单元CIW 用户接口单元（集成在WCU内）COU 控制单元CVMI 电流和电压测量接口板CWU 冷却水控制单元（控制装置集成在WCU内）DC_NP DC 中性点DDCS 分布式传动控制系统（通讯协议）DI 数字输入DIU 放电单元DO 数字输出DTC 直接转矩控制ECB 励磁电路断路器EMC 电磁兼容性EXU 励磁单元FCB 功能图编辑器FCI 现场通讯接口FIR FI LTER 受限激励响应滤波器FSCD 快速短路检测板GCT 门极换流晶闸管GDR 门极驱动板GTO 门极关断晶闸管GUSP 门极驱动电源板HVD 高压分配板IFU 输入滤波单元IGBT绝缘栅极双极性晶体管IGCT 集成门极换流晶闸管IM 感应电机INT接口板INU 逆变单元IRU 输入电抗单元ISU 隔离单元LSU 线性供电单元MCB 主电路断路器NTAC 脉冲编码器接口模块PAI 脉冲放大接口板PE 保护地PFF 正向功率传输PG 功率地PPCS 功率组件通讯系统（通讯协议）PUB PPCS单元PWM 脉冲宽度调制RBU 电阻制动单元S800 输入/输出接口板SM 同步电机TEU 终端单元UPS 不间断电源VLU 电压限幅单元WCU 水冷单元第一章 - 概述1.1 简介本技术样本描述了ACS 6000主要的电气特性，机械特性和环境特性，ACS 6000是专用于兆瓦级应用场合的模块化中压传动。
ABB电机 IPM_ EN 01_2009_9AKK104559 lowres(M3AA、M2CA)
1
ABB () is a leader in power and automation technologies that enable utility and industry customers to improve performance while lowering environmental impact. The ABB Group of companies operates in around 100 countries and employs about 120,000 people.
2
ABB LV Motors / Cat. BU / Low Voltage General Purpose Motors EN 12-2006
Low Voltage Industrial Performance Motors
Sizes 63 to 400, from 0.12 to 630 kW
Contents
Page
1 2 3
General information Aluminum motors Steel motors
4 13 59
1 ห้องสมุดไป่ตู้ 2 3
ABB reserves the right to change the design, technical specification and dimensions without prior notice.
ABB LV Motors / Low Voltage Industrial Performance Motors EN 01-2009
3
General information
Standards
ABB motors are of the totally enclosed and open drip proof, single or three phase squirrel cage type, built to comply with international IEC and EN standards. Motors conforming to other national and international specifications are also available on request. IEC / EN Electrical IEC/EN 60034-1 IEC/EN 60034-2 IEC 60034-8 IEC 60034-12 Mechanical IEC 60072 IEC/EN 60034-5 IEC/EN 60034-6 IEC/EN 60034-7 IEC/EN 60034-9 IEC 60034-14
ABB样本资料
泰永TBBQ系列对比ABB系列ABB品牌ATS共有两种规格:1.DPT：CB级，以断路器为主体开关，额定电流1～6300A。
详细分为：①DPT63～250：用于末端控制，额定电流1～250A。
采用S260系列MCB（63A及以下）及S系列MCCB （80A～250A）为主体开关。
②DPT/SE：用于两路市电或市电与柴油发电机供电的自动切换，额定电流160～6300A。
以S系列MCCB （1600A及以下）及F、E系列ACB（1600A以上）为主体开关。
③DPT/TE：用于带母联断路器的两路市电自动切换，额定电流630～6300A。
以S系列MCCB（1600A及以下）及F、E系列ACB（1600A以上）为主体开关。
2．OTM_C_D：派生PC级，以OT系列负荷隔离开关为主体开关，额定电流32～800A。
DPT/SE DPT/TE泰永科技TBBQ3系列自动转换开关电器是完全按照GB/T14048.11标准要求专门设计的PC级一体化ATSE，其特点如下：●驱动力采用励磁驱动。
励磁驱动是最简单的电动力源，比其它采用减速电机作为驱动力的结构（CB 级、采用隔离/负荷开关的ATSE）可靠性要高。
●采用连杆传动、结构自锁，整个传动机构十分简单（运动部件不超过10个）。
●触头材料均采用银合金，大大提高导电性能。
●触头压力大，可有效防止触头的跳动并承受较高的电流冲击。
●分离速度快（100A以下能够达到0.75m/s以上的速度），有利于灭弧。
●有专门的灭弧装置，快速灭弧。
●驱动机构非常可靠，可以做到大电流等级（泰永科技TBBQ3系列，一种驱动机构可以做到5000A，而且可靠性很高）。
针对PC级产品泰永TBBQ3系列与ABB OTM_C_D系列产品对比如下：一、产品类别不同泰永TBBQ3系列：三段式、两段式、轨道型、瞬间并联型、抽出带旁路型、交直流混合型。
OTM_C_D系列：三段式。
备注：泰永TBBQ3系列种类齐全，可为多行业提供针对性更强的解决方案。
ACS800选型样本
/motors&drives ..................................... 51
3ABD00018063 REV A CN 20.09.2005
1 2
3 4
5 6
7 8 9
标准应用软件 ................................. 39 可选的应用软件
不同应用的控制解决方案 .................... 40 DriveSize .................................................................. 43 DriveAP .................................................................... 44 DriveWindow 2 .......................................................... 45 DriveWindow Light 2 .................................................. 46 DriveOPC .................................................................. 47 表格 ......................................... 48
逆变器
设计图纸和接线图。由于模块的灵活性和可编程能力使
得它可以满足不同工业领域的不同的需求。
逆变器
ACS800-04单 传 动模 块 ACS800-04单元是集成在用户设计的柜体里的单传动 模块产品。 每个交流单传动单元包含整流部分、直流母线部分和 逆变部分。
ABB 电机说明书.pdf_1718579077.7802563
Dimensions: [mm]detail Aand are connected to each other.Scale - 1:1,57443763540150744376354015074437635401507443763540150T e m p e r a t u r eT T T 7443763540150Cautions and Warnings:The following conditions apply to all goods within the product series of WE-HCFT ofWürth Elektronik eiSos GmbH & Co. KG:General:•This electronic component is designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. •The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved.•Do not drop or impact the components, the component may be damaged.•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.•The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products.Product specific:Soldering:•The solder profile must comply with the technical product specifications. All other profiles will void the warranty.•All other soldering methods are at the customers’ own risk.Cleaning and Washing:•Washing agents used during the production to clean the customer application might damage or change the characteristics of the wire insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product. Potting:•If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the component. We recommend a manual inspection after potting to avoid these effects.Storage Conditions:• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the components to direct sunlight.•The storage conditions in the original packaging are defined according to DIN EN 61760-2.•The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Packaging:•The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. Handling:•Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty.•Applying currents with audio-frequency signals may result in audible noise due to the magnetostrictive material properties.•Due to heavy weight of the components, strong forces and high accelerations may have the effect to damage the electrical connection or to harm the circuit board and will void the warranty.•The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum temperature specified.These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.However, no responsibility is assumed for inaccuracies or incompleteness.Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODElGa001.0062023-07-27DIN ISO 2768-1mDESCRIPTIONWE-HCFT Flat Wire THT HighCurrent Inductor ORDER CODE7443763540150SIZE/TYPE BUSINESS UNIT STATUS PAGE D RA FTImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODElGa001.0062023-07-27DIN ISO 2768-1mDESCRIPTIONWE-HCFT Flat Wire THT HighCurrent Inductor ORDER CODE7443763540150SIZE/TYPE BUSINESS UNIT STATUS PAGE D RA FT。