DER-360 7.5W 15V 500mA Dim Non-Iso Tapped Buck PAR20 LYT4311E
德尔塔无传感器矢量控制迷你驱动VFD-EL-W系列产品说明书
Delta Sensorless Vector Control Compact Drive VFD-EL-W SeriesAutomation for a Changing WorldSensorless Vector Control Compact Drive VFD-EL-W SeriesSimple Speed ControlHorizontal MovementFixed Load ApplicationsFrame A1Frame BFrame A2Natural cooling (Frame A1): no maintenance requiredFan cooling (Frame A2, Frame B): easy fan installation, reliable design, fast dust removal150 % / 60 secs overload capability150% 60sCE certificationEnergy-savingSingle / multi-pump control:constant pressure mode & alternative operationProtection: overload, over voltage / over current stall preventionBuilt-in PID feedback controlP I DSafety and ReliabilityEasy MaintenanceComplete FunctionsApplicationsEdge Banding Machine• Communication isolation reduces the interference of HMI• One drive for two motors in parallel• Optimized accel. / decel. improve system efficiency• Small size, lightweight, easy maintenance and installationLogistics Conveyor• Built-in RS-485 COM port for high-speed communication• Fast and stable tension control• Small and compact design to save installation spaceMaterial Handling Machine• Multiple speed adjustment modes for different applications• AVR function to ensure the stability and reliability• Speed tracking function for continuing operation afterpower resumes from an instantaneous power failureConstant Pressure Pump• Build-in PID pressure control; no need for external PID device to save system cost• Built-in automatic inspection and restoration functionsin case of water outage; no external PLC needed• System leakage control function• Multi-pump control: alternates pump operation in cycle(One drive supports max. 4 pumps)Wiring230V / 460V ModelsControl TerminalsMI1MI2MI3MI4SG+SG-PIN3: GND PIN4: SG-PIN5: SG+U(T1)V(T2)W(T3)+10V AVI/ACI ACM 123Fuse/NFB (No Fuse Breaker)FactorySetting Run/StopMulti-step1Multi-step2Digital Signal CommonFactory setting is malfunction indication IM 3～Motor Multi-function Contact Output +24V AVI ACISwitchNPN PNPMain Circuit (power) Terminals Control Circuit Terminals Shielded Leads & CableEERA RB RC R(L1)S(L2)T(L3)(R)L N (S)(T)ETerminal SG+, SG- are joined to PIN5, PIN4 of RJ45 ConnectorDCM Multi-step38 1Switch(Default)(Default)RARBRCMI1MI2MI3DCMSG+SG -ACM +10V AVIRS-485Control Terminal LocationNPN AVI ACIPNP+24V MI4Frames and AppearancesInput Terminals (R / L1, S / L2, T / L3)Digital KeypadControl Board Cover Output Terminals (U / T1, V / T2, W / T3) ■Frame A1 / A 2Digital Keypad Choose NPN / PNP Control Terminals RS-485 Terminal(RJ45)■Frame BInput Terminals (R / L1, S / L2, T / L3)Digital Keypad Control Board CoverOutput Terminals (U / T1, V / T2, W / T3)CaseGrounding TerminalsFrequency Control Potentiometer Frequency Control Potentiometer Choose ACI / A VIA B C D E Digital KeypadChoose NPN / PNP Control Terminals RS-485 Terminal(RJ45)Choose AVI / A CIA B C D E CABDECABDEGrounding Terminals Cooling Fan* Frame A1 does not include a cooling fanModel ExplanationVFD 007 EL 21 W -1Minimal & Economic Input Voltage21: 230 V 1 PH 43: 460 V 3 PHVFD-EL-W SeriesApplicable Motor Capacity002: 0.25 HP (0.2 kW)004: 0.5 HP (0.4 kW)007: 1 HP (0.75 kW) 015: 2 HP (1.5 kW)022: 3 HP (2.2 kW)040: 5 .5 HP (4.0 kW)Variable Frequency DriveMethods of Packing-1: Individual Package N/A: 12 pcs / CartonVoltage 230 V460 V FrameA1BA1A2BModelVFD-__EL21W(-1) VFD-__EL43W(-1)002004007015022004007015022040Max. Applicable Motor Output (kW)0.20.40.75 1.5 2.20.40.75 1.5 2.2 4.0Max. Applicable Motor Output (HP)0.250.5 1.0 2.0 3.00.5 1.0 2.0 3.0 5.5Output RatingRated Output Capacity (kVA)0.6 1.0 1.6 2.9 4.2 1.2 2.0 3.3 4.47.4Rated Output Current (A) 1.62.54.27.511.01.52.54.25.59.0Maximum Output Voltage (V)3-Phase Proportional to Input VoltageOutput Frequency (Hz)0.1 ~ 400Carrier Frequency (kHz) 2 ~ 12 (Default 8 kHz)Input Rating Rated Input Current (A)4.96.59.315.724.01.83.24.37.110.0Rated Voltage / Frequency Single Phase, AC 200 V ~ 240 V ，50 / 60 HzThree Phase, AC 380 V ~ 480 V ，50 / 60 HzVoltage Tolerance±10 % (180 V ~ 264 V)±10 % (342 V ~ 528 V)Frequency Tolerance±5 % (47 Hz ~ 63 Hz)Weight (kg) 1.0 1.4 1.01.4Cooling Method Natural CoolingFan CoolingNatural CoolingFan CoolingBrake Unit N/A DC Choke N/A EMI FilterN/AProduct SpecificationsSpecificationsC o n t r o l C h a r a c t e r i s t i c sControl SystemSPWM (Sinusoidal Pulse Width Modulation) control (V / F Control, Vector Control)Frequency Setting Resolution 0.01 Hz Output Frequency Resolution0.01 HzTorque Characteristics Including the auto-torque, auto-slip compensation; starting torque can be 150 % at 5 Hz Overload Endurance 150 % of rated current for 1 minuteSkip Frequency Three zones, setting range 0.1 ~ 400 HzAccel. / Decel. Time 0.1 to 600 secs (2 independent setting for accel. / decel. time)Stall Prevention LevelSetting 20 to 250 % of rated currentDC Brake Operating frequency 0.1 ~ 400 Hz, Output 0 ~ 100 % rated current Start time 0 ~ 60 secs, stop time 0~60 secs V / F PatternAdjustable V / F pattern O p e r a t i n g C h a r a c t e r i s t i c sFrequency SettingKeypadSetting by▲▼External Signal Potentiometer : 5k Ω / 0.5 W, 0 to +10 VDC, 4 to 20 mAMulti-function input MI2 ~ MI4 (8 steps : Including the main speed, jog, up / down); RS-485 serial interface Operating Setting SignalKeypad Setting by RUN and STOPExternal SignalRUN / STOP by MI1 (default) or 2-wire / 3-wire control (MI1, MI2, MI3), jog operation, RS-485 serial interface (Modbus)Multi-function Input Signal8-speed switch (including the main speed): ban commands for acceleration / deceleration, 2-speed switch for accel. / decel., counter, jogging (inching), external base block, driver reset, NPN / PNP inputs, AVI / A CI analog inputs Switch to a speed as the default.Multi-function Output Signal(only Relays) AC drive operating, frequency attained, zero speed, counter, over-torque inspection, external base block, operating modes, anomaly alarm, overheating alarm, emergency stopProtection FunctionsOver voltage, over current, under voltage, anomalies, overload, overheating, electronic thermal relays, PTC overheating protectionOperation FunctionsBuilt-in voltage regulators, accel. / decel. S-curve, over-voltage / over-current stall prevention, 5 anomalous logs, reverse ban, restart for instantaneous power outage, DC brake, automatic toque / slip compensation and motor parameter adjustment, carrier frequency setting, output frequency limits, parameter reset, PID control, external counter, Modbus protocol, reset and restart for anomalies, energy-saving, fan control (for models with fans), 1st / 2nd frequency sources and combination, NPN / PNP inputsDisplay Keypad (optional) 6 function keys, 4-digit 7-segment LED, 4 status LEDs, adjustable frequency, self-defined units, parameter settings and lock function, anomaly alarms, Run / Stop / Reset buttons E n v i r o n m e n t a l C o n d i t i o n sEnclosure Rating IP20Pollution Degree 2Installation Location Altitude 1,000 m or lower, keeping from corrosive gases, liquids and dust Operating Temperature -10°C to 50°C (VFD007EL21W(-1) requires fan accessories)Storage / TransportationTemperature -20°C to 60°CAmbient HumidityBelow 90 % RH (non-condensing)Vibration 1.0 mm, peak to peak 2–13.2 Hz; 0.7–1.0 G, 13.2–55 Hz; 1.0 G, 55–512 Hz; compliant with IEC 60068-2-6 Certification, RoHS, GB 12668.3SpecificationsGeneral Specifications■Frame A1■Frame A2ModelVFD002EL21W(-1)VFD004EL21W(-1)VFD004EL43W(-1)VFD007EL21W(-1)VFD007EL43W(-1)Frame W W1H H1D D1S A1mm 92.082.0162.0152128.7 2.00 5.4inch3.62 3.23 6.38 5.98 5.070.080.21DimensionsModelVFD015EL43W(-1)Frame W W1H H1H2D D1S A2mm 92.082.0180.5162.0152128.7 2.00 5.4inch3.62 3.237.11 6.38 5.98 5.070.080.21SA(Mounting Hole )W1W DSee AH 1HD1W1W H 1HH 2SADSee AD1(Mounting Hole )Frame W W1H H1D D1S1S2Bmm 100.089.0174.0162.9136.0 4.0 5.9 5.4inch3.94 3.50 6.85 6.42 5.350.160.230.21ModelVFD015EL21W(-1)VFD022EL21W(-1)VFD022EL43W(-1)VFD040EL43W(-1)Ordering InformationFrameCooling MethodOperating TemperaturePower RangeModels Frame A1Natural Cooling-10°C ~ 50°C 230 V: 0.2 ~ 0.75 kW 460 V: 0.4 ~ 0.75 kWVFD002EL21W(-1)VFD004EL21W(-1)VFD004EL43W(-1)VFD007EL21W(-1)* VFD007EL43W(-1)Frame A2Fan Cooling460 V: 1.5 kW VFD015EL43W(-1)Frame B230 V: 1.5 ~ 2.2 kW 460 V: 2.2 ~ 4.0 kWVFD015EL21W(-1)VFD022EL21W(-1)VFD022EL43W(-1)VFD040EL43W(-1)■Frame BVFDxxxELxxW-1 and VFDxxxELxxW share the same electrical specifications.*VFD007EL21W(-1): to reach 50℃operating temperature, a fan kit MKEL-AFKM1 is required (without derating). *VFD007EL21W(-1): to reach 40℃operating temperature, no need for a fan kit (without derating).W1H 1W HDS1D1AS2BSee ASee B(Mounting Hole )(Mounting Hole )10AccessoriesKeypadCableFan kitReactorVFD-PU06VFD-PU08RJ45 CableVFD-PU08VRF220X00AMKEL-AFKM1• 5 digits• Parameter duplication and recording • RJ11 connector • RS-485 communication• 4 digits• RJ45 connector• RS-485 communication• 4 digiits• RJ45 connector• RS-485 communicationNo.ModelLengthmm inch 1UC-CMC003-01A 30011.82UC-CMC005-01A 50019.63UC-CMC010-01A 100039.04UC-CMC015-01A 150059.05UC-CMC020-01A 200078.76UC-CMC030-01A 3000118.17UC-CMC050-01A5000196.8* RJ45 cable is not included for VFD-PU08 & VFD-PU08V.DELTA_IA-MDS_VFD-EL-W_C_EN_20200716Industrial Automation HeadquartersDelta Electronics, Inc.Taoyuan Technology CenterNo.18, Xinglong Rd., Taoyuan District, Taoyuan City 33068, TaiwanTEL: 886-3-362-6301 / FAX: 886-3-371-6301AsiaDelta Electronics (Shanghai) Co., Ltd.No.182 Minyu Rd., Pudong Shanghai, P .R.C.Post code : 201209TEL: 86-21-6872-3988 / FAX: 86-21-6872-3996Customer Service: 400-820-9595Delta Electronics (Japan), Inc.Tokyo OfficeIndustrial Automation Sales Department 2-1-14 Shibadaimon, Minato-ku Tokyo, Japan 105-0012TEL: 81-3-5733-1155 / FAX: 81-3-5733-1255Delta Electronics (Korea), Inc.Seoul Office1511, 219, Gasan Digital 1-Ro., Geumcheon-gu, Seoul, 08501 South KoreaTEL: 82-2-515-5305 / FAX: 82-2-515-5302Delta Energy Systems (Singapore) Pte Ltd.4 Kaki Bukit Avenue 1, #05-04, Singapore 417939TEL: 65-6747-5155 / FAX: 65-6744-9228Delta Electronics (India) Pvt. Ltd.Plot No.43, Sector 35, HSIIDC Gurgaon, PIN 122001, Haryana, IndiaTEL: 91-124-4874900 / FAX : 91-124-4874945Delta Electronics (Thailand) PCL.909 Soi 9, Moo 4, Bangpoo Industrial Estate (E.P .Z), Pattana 1 Rd., T.Phraksa, A.Muang, Samutprakarn 10280, ThailandTEL: 66-2709-2800 / FAX : 662-709-2827Delta Electronics (Australia) Pty Ltd.Unit 20-21/45 Normanby Rd., Notting Hill Vic 3168, Australia TEL: 61-3-9543-3720AmericasDelta Electronics (Americas) Ltd.Raleigh OfficeP .O. Box 12173, 5101 Davis Drive,Research Triangle Park, NC 27709, U.S.A.TEL: 1-919-767-3813 / FAX: 1-919-767-3969Delta Greentech (Brasil) S/ASão Paulo OfficeRua Itapeva, 26 – 3˚ Andar - Bela Vista CEP: 01332-000 – São Paulo – SP - Brasil TEL: 55-11-3530-8643 / 55-11-3530-8640Delta Electronics International Mexico S.A. de C.V.Mexico OfficeGustavo Baz No. 309 Edificio E PB 103Colonia La Loma, CP 54060Tlalnepantla, Estado de México TEL: 52-55-3603-9200*We reserve the right to change the information in this catalogue without prior notice.EMEAHeadquarters: Delta Electronics (Netherlands) B.V.Sales:*************************Marketing:*****************************TechnicalSupport:******************************CustomerSupport:****************************Service:***************************TEL: +31(0)40 800 3900BENELUX: Delta Electronics (Netherlands) B.V.De Witbogt 20, 5652 AG Eindhoven, The Netherlands Mail:****************************TEL: +31(0)40 800 3900DACH: Delta Electronics (Netherlands) B.V.Coesterweg 45, D-59494 Soest, Germany Mail:*************************TEL: +49(0)2921 987 0France: Delta Electronics (France) S.A.ZI du bois Challand 2, 15 rue des Pyrénées, Lisses, 91090 Evry Cedex, France Mail:***********************TEL: +33(0)1 69 77 82 60Iberia: Delta Electronics Solutions (Spain) S.L.UCtra. De Villaverde a Vallecas, 265 1º Dcha Ed. Hormigueras – P .I. de Vallecas 28031 Madrid TEL: +34(0)91 223 74 20Carrer Llacuna 166, 08018 Barcelona, Spain Mail:***************************Italy: Delta Electronics (Italy) S.r.l.Via Meda 2–22060 Novedrate(CO) Piazza Grazioli 18 00186 Roma Italy Mail:**************************TEL: +39 039 8900365Russia: Delta Energy System LLCVereyskaya Plaza II, office 112 Vereyskaya str. 17 121357 Moscow RussiaMail:***********************TEL: +7 495 644 3240Turkey: Delta Greentech Elektronik San. Ltd. Sti. (Turkey)Şerifali Mah. Hendem Cad. Kule Sok. No:16-A 34775 Ümraniye – İstanbulMail:***************************TEL: + 90 216 499 9910GCC: Delta Energy Systems AG (Dubai BR)P .O. Box 185668, Gate 7, 3rd Floor, Hamarain Centre Dubai, United Arab EmiratesMail:************************TEL: +971(0)4 2690148Egypt + North Africa: Delta ElectronicsUnit 318, 3rd Floor, Trivium Business Complex, North 90 street, New Cairo, Cairo, EgyptMail:************************。
施耐德电气 360 度红外感应器 IS 360-1 DE 黑色 使用手册说明书
EAN 4007841 032852Article number 032852infrared sensor360°max. 4 m1000 W max. (LED-ready)IP54 2 - 2000 lux 8 sec - 35 min ideal 2,2 m energy savingmanufacturer's warrantyCEFunction descriptionIntelligent technology for installation. Infrared wall sensor IS 360-1 DE, for indoors and out, ideal for installing in projecting roofs and suspended ceilings, 360° angle of coverage, reach can be set up to 4 m, selectable time and twilight threshold, detection zone can be customised with shrouds.Technical specificationsDimensions (Ø x H)78 x 89 mm Manufacturer's Warranty 3 years Settings via Potentiometers With remote control No Version blackPU1, EAN 4007841032852TypeMotion detectors Application, place Outdoors, IndoorsApplication, room outdoors, front door, all round the building, terrace / balcony, Indoors Colour black Colour, RAL9005Includes corner wall mount No Installation site ceilingInstallation In-ceiling installation, Ceiling IP-rating IP54Protection class IIAmbient temperature-20 – 40 °CLED lamps < 2 W 16 W LED lamps > 2 W < 8 W 64 W LED lamps > 8 W 64 W Capacitive load in μF 132 µFTechnology, sensors passive infrared, Light sensor Mounting height 2,50 – 4,00 m Mounting height max.4,00 m Optimum mounting height 2,5 m Detection angle 360 °Angle of aperture 90 °Sneak-by guardYes Capability of masking out individual segmentsYes Electronic scalability No Mechanical scalability NoReach, radial Ø 4 m (13 m²)Reach, tangential Ø 8 m (50 m²)Switching zones304 switching zoneshttps://www.steinel.deEAN 4007841 032852Article number 032852Technical specificationsMaterial PlasticMains power supply230 – 240 V / 50 – 60 Hz Switching output 1, resistive1000 WSwitching output 1, number ofLEDs / fluorescent lamps6 pcs.Fluorescent lamps, electronic ballast430 WFluorescent lamps, uncorrected500 VAFluorescent lamps, series-corrected406 VAFluorescent lamps, parallel-corrected406 VASwitching output 1, low-voltage halogen lamps 1000 VATwilight setting 2 – 2000 lxTime setting8 s – 35 Min.Basic light level function NoMain light adjustable NoTwilight setting TEACH NoConstant-lighting control NoInterconnection YesType of interconnection Master/masterInterconnection via Cablehttps://www.steinel.deEAN 4007841 032852Article number 032852Detection Zone Dimension DrawingLight without neutral conductor Light with neutral conductorConnection using two-circuit switch for manual and automatic operation Circuit diagram Connection via a changeover switch for continuous and automatic operationhttps://www.steinel.de。
阿尔法冷Eisbaer Aurora 360 CPU 数字RGB高光说明书
What is it?Alphacool Eisbaer Aurora 360 CPU - Digital RGBHighlightsA CPU water cooling system that consists entirely of Alphacool's DIY products and is therefore expanda-ble, refillable and modifiable. The Alphacool Eisbaer Aurora CPU water cooling system is equipped with digital addressable RGB LEDs on the fans as well as on the reservior - pump combination. These can be controlled with the supplied digital RGB controller, own digital RGB controllers or via compatible main-boards.•Digital addressable RGB LEDs incl. Controller• Pump with 10% more power and less noise (compared to the previous model) •New TPV hoses and fittings from the Alphacool Enterprise Solution seriesArticle textThe Alphacool Eisbaer Aurora AIO CPU water cooler is a latest development of the popular and well-known Eisbaer cooler. Alphacool has improved many features but the ability to expand the cooler via the quick release fasteners and the famous high-quality copper radiators have been retained. The large capaci-ty reservoir and the ability to refill the cooler has also been kept the same.The Heart of the AiOThe pump, CPU cooler and reservoir combo is the heart of the Eisbaer Aurora. The cooler base is made of high-quality copper and has a fine slotted structure. The surface area has been further expanded com-pared to the previous model to completely cover the larger DIE areas of AMD and Intel processors. The DC-LT pump has also been redesigned and is now almost 10% more powerful at a reduced noise level. The reservoir is many times larger compared to standard AIO systems ensuring a longer service life. In addition, the unit also has a fill port which can be used to refill if necessary. This is especially important if you want to extend the loop via the quick release fasteners.Custom Cooling Components!A great advantage of the Eisbaer Aurora series is the expandability via the aptly named ‘Eisbaer-Ready’ quick release fasteners. These have also been redesigned and are now smoother and more unobtrusive than those of the previous model. Nevertheless, these quick-release fasteners are 100% compatible with all Eisbaer Ready products such as prefilled radiators, the Eiswolf AIO water cooler for graphics cards and the well-known Alphacool HF quick-release fasteners, which are available separately for normal DIY wa-ter cooling systems. The fittings are from the Enterprise Solution series from Alphacool. They have a standard G1/4" thread and can be exchanged for any other fittings if you wish. The TPV hose is extremely resistant and is also used in the Enterprise Solution series for servers and workstations. Using custom cooling parts for an AiO means you get many more options than usual.Copper RadiatorAs usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water-carrying components such as the end chambers, the cooling fins and the cool-ing channels to which the fins are soldered. Only the thread inserts are made of brass as copper is too soft for this application. The cooling fins are also only lightly painted. If you look closely, the copper even shimmers through. The reason for this is to ensure that the paint does not affect the cooling capacity, which would be reduced by too thick a coating. The fin density is at an optimal 15FPI, allowing the radia-tor to work perfectly at low airflow. A too high density would require faster, louder fans. Alphacool has chosen the golden number here as you can keep fans running slower and quieter whilst still getting fantas-tic performance.Fans and LightingThe entire Eisbaer Aurora cooler has been equipped with addressable digital RGB LEDs. The pump hous-ing has an Eisbaer pattern all around which is fully illuminated. This gives a unique look when installed into a case. The Alphacool Aurora LUX Pro fans are also fully illuminated with 5V aRGB LEDs. The fan frame has a unique pattern with many small cut-outs that create a particularly elegant effect. You do not see in-dividual LEDs and the lighting is much more interesting than a simple LED ring. Of course, all Digital RGB LEDs can be controlled as you like, such as via the motherboard or with a third-party controller. Depend-ing on the controller almost all effects are possible.How to Connect EverythingThe fans are controlled via a 4-pin PWM connector. To reduce the number of headers needed on the motherboard, Y-cable is included so that 2 or 3 fans can be ran from a single header. The RGB lighting is connected via a 3-pin JST connector. Each cable also has an integrated Y-adapter, so that the fans can be daisy chained very easily. A 3-pin 5V adapter is included in the package. This allows you to connect and control the fans to any mainboard with the appropriate connector. Alternatively, the included Digital RGB Controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard.The Eisbaer Aurora CPU AIO water cooling is a worthy successor of the well-known Eisbaer series and improves many details of the water cooling.。
TA Instruments产品说明书
New Castle, DE USA Lindon, UT USA Crawley, United Kingdom Shanghai, China Beijing, ChinaTaipei, TaiwanTokyo, JapanSeoul, Korea Bangalore, IndiaParis, France Eschborn, Germany Brussels, BelgiumEtten-Leur, Netherlands Sollentuna, Sweden Milano, Italy Barcelona, Spain Melbourne, Australia Mexico City, MexicoDifferential Scanning Calorimetry (DSC) Q20004 Q206 DSC Technology8 Accessories10 Temperature Control Options14 Tzero®& MDSC® Technology18 Applications20Thermogravimetric Analysis (TGA) Q5000 IR32 Q50034 Q5036 Q5000 IR Technology38 Performance42 Q500 / Q50 Technology44 TGA Accessories & Options46 Applications52 TGA-HP58 Applications60Simultaneous DSC/TGAQ60064 SDT Technology66 Applications68Vapor Sorption AnalysisVTI-SA+72 VTI-SA+Technology74 Q5000 SA78 Q5000 SA Technology80 Applications86 Dynamic Mechanical Analysis (DMA) Q80092 Deformation Modes & Sample Size94 Subambient Operation95 Q800 Technology96 Modes of Deformation98 Accessories100 DMA Theory104 Modes of Operation105 Applications106Thermomechanical Analysis (TMA) Q400EM / Q400112 Q400 Technology114 Modes of Deformation116 TMA Theory / Modes of Operation118 Applications122CALORIMETRYDSC Q2000 SPECIFICATIONS TechnologiesTzero ®TechnologyAdvanced MDSC ®Available Direct Cp MeasurementIncluded Platinum™ Software IncludedHardware Features SVGA Touch Screen Included User Replaceable Tzero Cell Yes 50-Position Autosampler Available Autolid Included Dual Digital Mass Flow Controllers Included Full Range of Cooling Accessories (LNCS, RCS90, RCS40, FACS, QCA)Available Pressure DSC Available Photocalorimeter Available Performance Temperature Range Ambient to 725 ˚C With Cooling Accessories -180 to 725 ˚C Temperature Accuracy +/- 0.1 ˚C Temperature Precision +/- 0.01 ˚C Calorimetric Reproducibility (indium metal)+/- 0.05 %Calorimetric Precision (indium metal)+/- 0.05 %Dynamic Measurement Range>+/- 500 mW Baseline Curvature (Tzero; -50 to 300 ˚C)10 μW Baseline Reproducibility with Tzero+/- 10 μW Sensitivity 0.2 μW Indium Height / Width (mW/˚C)* 60The Q2000 is a research-grade DSC with superiorperformance in baseline flatness, precision,sensitivity, and resolution. Advanced Tzero ®technology and multiple exclusive hardware andsoftware features make the Q2000 powerful,flexible, and easy-to-use. Modulated DSC ®anda reliable 50-position autosampler are availableas options. An additional high-value feature isPlatinum™ software, which permits automaticscheduling of tests designed to keep the Q2000consistently in top operating condition. Availableaccessories, such as a new photocalorimeter,pressure DSC, and the widest array of coolingdevices, make the Q2000 a DSC well-equippedto satisfy the most demanding researcher.*Indium height/width ratio: 1.0 mg In heated at 10 ˚C/min in N 2atmosphere. (A larger number denotes better performance).DSC Q20 SPECIFICATIONSHardware FeaturesQ20AQ20Q20P Tzero ®Cell (fixed position)Included Included—User Replaceable Cell——Yes 50-Position Autosampler —Included—Autolid —Included—Dual Digital Mass Flow Controllers Included Included—Full Range of Cooling Accessories Available AvailableQCA Only (LNCS, RCS90, RCS40, FACS, QCA)Pressure DSC ——Yes Platinum Software —Included—MDSC Available Available —Performance Temperature Range Amb to 725 ˚C Amb to 725 ˚C Amb to 725 ˚C With Cooling Accessories -180 to 725 ˚C -180 to 725 ˚C -130 to 725 ˚C Temperature Accuracy +/- 0.1 ˚C +/- 0.1 ˚C +/- 0.1 ˚C Temperature Precision +/- 0.05 ˚C +/- 0.05 ˚C +/- 0.05 ˚C Calorimetric Reproducibility (indium metal)+/- 1 % +/- 1 %+/- 1 %Calorimetric Precision (indium metal)+/- 0.1 %+/- 0.1 %+/- 0.1 %Dynamic Measurement Range +/- 350 mW +/- 350 mW +/- 350 mW Digital Resolution>0.04μW >0.04μW >0.04μW Baseline Curvature (-50 to 300 ˚C)<0.15 mW <0.15 mW —Baseline Reproducibility< 0.04 mW <0.04 mW —Sensitivity1.0 μW 1.0 μW 1.0 μW Indium Height / Width (mW/˚C)* 8.08.0—*Indium height/width ratio: 1.0 mg In heated at 10 ˚C/min in N 2atmosphere. (A larger number denotes better performance).The Q20 (Q20, AQ20, Q20P) is a cost-effective,easy-to-use, general-purpose DSC module, with calorimetric performance superior to many competitive research-grade models. These are entry-level instruments not based on performance,but on available options. The Q20 is idealfor research, teaching, and quality controlapplications that require a rugged, reliable, basicDSC. The AQ20 is designed for unattendedanalysis of up to 50 samples in a sequentialmanner. The Q20 and AQ20 include dual digitalmass flow controllers and are available withMDSC ®. The Q20P is designed for studies ofpressure-sensitive materials or samples that mayvolatilize on heating.Cooling Rods Cooling Ring Furnace Tzero Thermocouple Constantan Sensor Chromel Area ThermocouplePhotocalorimeterThe Photocalorimeter Accessory (PCA), for the Q2000 DSC, permits characterizationof photocuring materials between -50 and 250 ˚C. UV/Visible light (250-650 nm) froma 200W high pressure mercury source is transmitted to the sample chamber via anextended range, dual-quartz light guide with neutral density or band pass filters. Tzero ®technology permits direct measurement of light intensity at both the sample and referencepositions. It also provides for simultaneous measurement of two samples.RCS40 ArrayRCS90TZERO ®DSC PERFORMANCE APPLICATIONSMDSC ®APPLICATIONSSTANDARD PANS/LIDS APPLICATIONSDSC pans & lids are available in aluminum, alodine-coated aluminum, gold, platinum, graphite, and stainless steel versions. They can be used under a variety of temperature and pressure conditions. Samples can be run in the standard DSC mode in open pans, crimped or hermetically sealed pans / lids or in pressure capsules. Samples in open pans can also be run at controlled pressures using the PDSC Cell. All aluminum standard pans have the same temperature and pressure rating. General details of the pans are shown here.TZERO ®PANS/LIDS APPLICATIONS© 2010 TA Instruments. All rights reserved.L90010.001。
IND360产品系列的商品说明书
IND360base Automation Indicators• CalFree TM and CalFree Plus TM, as well as automaticPLC/DCS-driven calibration of precision scalesI N D 360b a s e A u t o m a t i o n I n d i c a t o rTechnical FeaturesIND360 Automation Indicator Technical Features Continued IND360 Automation IndicatorParameter Detail Units ofMeasurementDINPanelHarshHousingEnclosure typeDIN-Rail mount,quick connection with automatic grounding Panel mount with detachable electronicsVESA 100 Desk/wall/column mountMaterialRugged ABS plasticStainless steel front panel with hygienic drip edge including mounting hardware Stainless steel, includes fixed-angle brackets Ingress protection IP20, Type 1IP65 display, IP20 electronicsIP66 and IP69KW × H × D mm / in 40 × 130 × 100 / 1.6 × 5.1 × 3.9175 × 94 × 16 / 6.9 × 3.7 × 0.6275 × 85 × 200 / 10.8 × 3.3 × 7.9Shipping weight kg / lb 0.5 / 1.11.7 / 3.73.6 / 7.9Legal for Trade °C / °F -10 to 40 / 14 to 104; 10% to 90% relative humidity, non-condensing Operation °C / °F -10 to 50 / 14 to 122; 10% to 90% relative humidity, non-condensing Storage°C / °F -40 to 60 / -40 to 140; 10% to 90% relative humidity, non-condensing PowerRequirementsDC poweredVDC / W20 - 28VDC 1 / 12W 21 Power supply short circuit protection time shall be equal or longer than 100ms.218W, when 5 to 8 POWERCELLs are connectedAC poweredVAC / Hz NA 100 - 240 VAC / 49 - 61 Hz Power Dissipation DC powered W 3 4.5 4.5AC powered WNA 66ScaleNumber of scales 1Strain gauge (analog) type Max. 8× 350Ω (20× 1,000Ω) load cells; 1-4mV/V sensitivity; 5VDC excitation voltageμV buildrecommended / approved 0.1 μV/d recommended; 0.3 μV/e Weights and Measures approvedPOWERCELL ® type Supports one PowerDeck TM floor scale or a network of up to 8 POWERCELL ® load cells, or PowerMount TM weigh modulesPrecision type Precision scales and weigh modules – see Precision Scale Compatibility on page 6Adjustment / calibration Zero / span with linearization up to 5 points; step; CalFree (analog scale) / CalFree Plus (POWERCELL ® scale)Primary unit Analog/POWERCELL ®: g, kg, lb, t and tonPrecision: Determined by scale or weigh module Calibration unit Analog/POWERCELL ®: g, kg, lb, t and ton Precision: Determined by scale or sensorCapacity & incrementAnalog/POWERCELL ®: 1,000,000 maximum Capacity, maximum 100,000 display incrementsPrecision: Determined by scale or sensorConnectivityAutomation interface Optional: EtherNet/IP , Profibus DP , PROFINET, EtherCAT, CC-Link IE Field Basic, Mod-bus TCP , Modbus RTU, or Analog Output (4-20 mA/0-10VDC, 16-bit resolution)Redundancy Media Redundancy Protocol (MRP - Siemens) and Device Level Ring (DLR - ODVA)Protocol Standard Automation Interface (SAI) 2 and 8 block format Protocol type Floating point and binary; cyclical or acyclicalSimultaneous floating point variables 1 or 7 user-selectable including status block for condition monitoringAlarm status Smart5TMbased on NAMUR NE107Condition monitoring Heartbeat, Data OK, Smart5TMAutomation Bus driv-ers - Siemens GSD (Profibus DP), GSDML (PROFINET), function block Certification Profibus DP / PROFINETProfibus international Certificate No: Z02266, Z13050, Z13051Parameter DetailUnits of Mea-surementDINPanelHarshConnectivityAutomation device drivers ODVA / Rockwell Electronic Data Sheet (EDS), Custom Add-on Profile (AOP), Custom Add-on Instruction (AOI)Certification EtherNet/IP Open Device Vendors Association (ODVA) File Number: 12095.01Automation Bus drivers - BeckhoffEtherCAT Slave Information (ESI)Automation Bus drivers - MitsubishiControl & Communication System Profile Plus (CSP+)Certification CC-Link IE Field BasicCC-Link Partner Association (CLPA) Reference Number: NTC-SL-00032, NTC-IFB-00036Service Interfaces Service interfaces Web interface over Ethernet TCP/IP and/or keypad and displayService functions Configuration, adjustment, parameter backup and restore, cloning and monitoring Automation Bus Update RateStrain gauge (analog)Hz960 for PROFINET, EtherNet/IP , Profibus DP , EtherCAT, CC-Link IE Field Basic without application480 for PROFINET, EtherNet/IP , Profibus DP , EtherCAT, CC-Link IE Field Basic with application100 for analog output, Modbus TCP and Modbus RTUPOWERCELL ®/PowerMount TM / PowerDeck-TM100 for 1-4 load cells; 50 for 5-8 load cells over all automation interfacesPrecisionMaximum 92Hz over all automation interfaces FilteringStrain gauge (analog)Weighing Mode Normal, dynamicEnvironment Very stable, stable, standard, unstable, very unstable Limit FrequencyLow pass filter, 1 - 20Hz POWERCELL ®/ PowerMount/PowerDeckLow Pass Filter Very light, light, medium, heavy Stability FilterEnable, disablePrecision scales and weigh modulesFilter type and settings depending on scale or weigh module Inputs / OutputsOptional inputs (selectable polarity)Max. 5 inputs - functions: none, clear tare, tare, zero, print. Voltage range high: 5 ~ 30VDC; voltage range low 0 ~ 3VDCOptional OutputsMax. 8 outputs - functions: none, center of zero, comparators (1-8), Smart5 red, Smart5 orange, motion, net, over capacity, under zero. Voltage range high: 5 ~ 30VDC, max current 150mA Display Type1.04“ Green OLED4.3” Color TFTOn-display status IndicatorsWeight units, gross/net indication; graphic symbols for motion, center of zero, Smart5 alarms.Tri-color status LEDs System (SYS), Network 1 (NW1), Network 2 (NW2)Status information displayed on main display Weight displayCharactersMaximum 9 digits including sign, displays 8 weight digits on high-precision devices Keyboard Keys 4 keys (Up, Down, Left, Enter)5 keys (Up, Down, Left, Right, Enter)Overlay0.9 mm thick polyester overlay (PET) with 0.178 mm thick polycarbonate display lens0.9 mm thick polyester overlay (PET) with 0.178 mm thick polycarbonate display lens User Security - 3 levels: administrator, maintenance and operator LogsAlibi 27,000 records Error log 500 recordsMaintenance log2,500 recordsChange log 2,500 recordsIII III N D 360b a s e A u t o m a t i o n I n d i c a t o rTechnical Features ContinuedIND360 Harsh dimensionIND360 DIN dimension175mm94 mm114 m m 275 m m87 mm200 mm 135 mm40 mm100mmActuatorsPLC/DCSPrecision Scale Compatibility IND360 Automation IndicatorsIND360 Precision connects to many types of precision weigh modules. The following table lists how various functions are supported when different types of weigh modules or scales are connected.Precision Scales for Legal-for-TradePrecision Scales for AutomationCompatible Modules PBD555 / PBD769 / PBD655 / PBK785 / PBK9 / PTA4XX / PFA5XX / PUA5XX / PFA779lift / PFK9WKC / WMS / WXS / SLF6 / PBK989-APW / PFK989-APW Basic Functions:Read weight and status, tare, zero, clearDisplay/keypad Display/keypad Web interface Web interface Automation interfaceAutomation interfaceParameter configuration:e.g. calibration, adjustment, filter parametersPanel and harsh version: use the display/keypadDIN version: not supported on OLED. Use panel display(30617718), and the display cable (30624029). Purchase as a separate item.Display/keypad (main parameters)Software tool: APW-Link (all parameters)Automation interface 1Firmware upgrade for pre-cision modulesSoftware tool: eloaderSoftware tool: eloader1Each weigh module supports different functions. Please consult the SAI (Standard Automation Interface) manual for further details.Safety and Metrology ApprovalSafety and MetrologyI N D 360b a s e A u t o m a t i o n I n d i c a t o rOrdering InformationIND360 Automation Indicators IND360 is available in different variants with the main item number 30601194.Choose options according to the variant configuration structure, and contact your METTLER TOLEDO Sales represen-tative for detailed ordering information.C - 5in8out (Solid State)Modbus TCP or EtherCAT or CC-Link IE Field Basic)M - Modbus RTU R - Profibus DPOrdering InformationIND360 Automation IndicatorsBase Unit DescriptionsItem Number IND360 in different enclosures 30601194IND360 DIN Mount IND360 Panel Mount IND360 HarshSmart Options1 = None (analog scale)4 = Precision (PBK, PFK) - Standard Industrial (approved readability and M12 connector on terminal side)5 = PowerDeck M12 (connector on terminal side)6 = PowerMount (open wires on terminal side)8 = Precision - APW incl. PBK, PFK (higher readability and open wires on terminal side)Input/Output Options0 = NoneA = Analog output (4 - 20mA / 0 - 10VDC)B = Analog output (4 - 20mA / 0 - 10VDC) plus 3 digital inputs / 4 digital outputs (solid state)C = 5 digital inputs / 8 digital outputs (solid state)Connectivity Options 0 = NoneI = Industrial Ethernet (PROFINET or EtherNet/IP or Modbus TCP or EtherCAT or CC-Link IE Field Basic)M = Modbus RTU R = Profibus DPApplication Options 0 = Base F = Fill/dose T = Tank vesselL = legacy IND131/331 PLC CommunicationPower Options1 = AC (AC/DC power module included)3 = DCFor more information/IND360METTLER TOLEDO Group Industrial DivisionLocal contact: /contactsSubject to technical changes©06/2022 METTLER TOLEDO. All rights reserved Document No. 30531752 B MarCom IndustrialOrdering InformationIND360 Automation IndicatorsAccessoriesItem Number Descriptions30601149 4 - 20mA / 0 - 10VDC analog output PCBA kit for IND360 DIN and Panel mount version including enclosure opening tool 30601150 4 - 20mA / 0 - 10VDC analog output PCBA kit for IND360 Harsh version30601151PCBA kit of 4 - 20mA / 0 - 10VDC analog output, 3 discrete inputs, 4 discrete outputs (solid state) for IND360 DIN and Panel mount version including enclosure opening tool30601152PCBA kit of 4 - 20mA / 0 - 10VDCA analog output, 3 discrete inputs, 4 discrete outputs (solid state) for IND360 Harsh version 30601153PCBA kit of 5 discrete inputs, 8 discrete outputs (solid state) for IND360 DIN and Panel mount version including enclosure ope-ning tool30601154PCBA kit of 5 discrete inputs, 8 discrete outputs (solid state) for IND360 Harsh version30601155PCBA kit of Industrial Ethernet connection (PROFINET, EtherNet/IP , EtherCAT, CC-Link IE Field Basic or Modbus TCP) for IND360 DIN and Panel mount version including enclosure opening tool30601156PCBA kit of Industrial Ethernet connection (PROFINET, EtherNet/IP , EtherCAT, CC-Link IE Field Basic or Modbus TCP) for IND360 Harsh version30601159PCBA kit of Modbus RTU connection for IND360 DIN and Panel mount version including enclosure opening tool 30601160PCBA kit of Modbus RTU connection for IND360 Harsh version30601161PCBA kit of Profibus DP connection for IND360 DIN and Panel mount version including enclosure opening tool 30601162PCBA kit of Profibus DP connection for IND360 Harsh version 30617714AC/DC Power Module APS32430617716Power supply cable from the APS324 power module to IND36030624028Complete set of IND360 connecters.30624029Display cable (3m) from IND360 module to the panel. Use this when the IND360 module is not mounted to the back of the panel.30624030Display cable (11cm) from IND360 module to the panel. Use this when the IND360 module is mounted to the back of the panel.30462051VESA 100 Bracket to mount a IND360 Harsh version on desk or on wall 22020286Adjustable Column Bracket VESA 100 for IND360 Harsh version 30624077Opening tool for IND360 DIN mount version enclosureI N D 360b a s e A u t o m a t i o n I n d i c a t o r。
TH2515 仪器说明书
Ver 2.1目录Ver 2.0 (2)第1章仪器简介与开箱安装 (8)1.1仪器简介 (8)1.2开箱检查 (8)1.3电源连接 (8)1.4保险丝 (8)1.5环境 (8)1.6使用测试夹具 (9)1.7预热 (9)1.8仪器的其它特性 (9)第2章前面板说明及入门操作 (10)2.1前面板说明 (10)2.2后面板说明 (11)2.3显示区域的定义 (12)2.4按键及其相应的显示页面 (13)2.4.1测量主菜单按键【DISP】 (13)2.4.2系统设置主菜单按键【SETUP】 (13)2.5基本操作 (13)2.6开机 (14)第3章基本操作 (15)3.1<测量显示>页面 (15)3.1.1测试功能 (15)3.1.2测试量程 (16)3.1.3测试速度 (17)3.1.4文件管理 (17)3.1.5其他工具 (17)3.2<比较显示>页面 (18)3.2.1文件管理 (19)3.2.2工具 (19)3.2.3比较 (19)3.2.4比较模式和上下限、百分比误差设置 (19)3.3<档显示>页面 (19)3.4<统计显示>页面 (21)3.4.1边界模式和其相应值的设定 (21)3.4.2统计状态 (21)3.4.3统计分析参数说明 (21)3.4.4工具 (22)3.4.5文件 (22)3.5<测量设置>页面 (22)3.6<TC/Δt设置>页面 (24)3.6.1温度校正(Temperature Correction 简称TC) (25)3.6.2温度转换(temperature conversion 简称t ) (25)3.6.3温度传感器的类型 (26)3.6.4参数设定 (27)3.6.5文件 (27)3.7<档设置>页面 (27)3.7.1文件 (29)3.7.2工具 (29)第4章系统设置和文件管理 (30)4.1系统设置 (30)4.1.1触摸音 (30)4.1.2语言 (30)4.1.3口令 (31)4.1.4总线模式 (31)4.1.5波特率 (32)4.1.6总线地址 (32)4.1.7EOC信号 (32)4.1.8Err.OUT信号 (33)4.1.9电源频率 (34)4.1.10时间和日期设定 (34)4.2<文件管理>功能页面 (34)4.2.1存储/调用功能简介 (34)4.2.2U盘上的文件夹/文件结构 (35)4.2.3DHCP (39)4.2.4IP地址 (40)4.2.5子网掩码 (40)4.2.6网关 (40)4.2.7首选DNS、备用DNS (40)第5章性能指标 (41)5.1测量功能 (41)5.1.1测量参数及符号 (41)5.1.2测量组合 (41)5.1.3等效方式 (41)5.1.4量程 (41)5.1.5触发 (41)5.1.6测试端方式 (41)5.1.7测量中的各种时间的开销 (41)5.1.8平均 (42)5.1.9显示的位数 (42)5.2测试信号 (42)5.2.1量程电流 (42)5.2.2开路输出电压 (42)5.2.3测量显示最大范围 (42)5.3测量准确度 (43)5.3.2温度测量的准确度(Pt500) (44)5.3.3温度测量的准确度(模拟输入) (45)5.3.4温度修正系数K (45)第6章远程控制 (46)6.1RS232C接口说明 (46)6.2GPIB接口说明(选购件) (47)6.2.1GPIB接口功能 (49)6.2.2GPIB 地址 (49)6.2.3GPIB总线功能 (49)6.2.4可编程仪器命令标准(SCPI) (50)6.3LAN远程控制系统 (50)6.3.1通过浏览器访问TH2515 (52)6.3.2通过上位机软件访问TH2515 (52)6.4USBTMC远程控制系统 (53)6.4.1系统配置 (53)6.4.2安装驱动 (53)6.5USBVCOM虚拟串口 (54)6.5.1系统配置 (54)6.5.2安装驱动 (54)第7章RS232命令参考 (55)7.1SCPI系统命令 (55)7.1.1DISPlay子系统命令集 (55)7.1.2FUNCtion 子系统命令集 (56)7.1.3APERture子系统命令集 (61)7.1.4TRIGer子系统命令集 (61)7.1.5FETCh?子系统命令集 (63)7.1.6TEMPerature子系统命令集 (64)7.1.7COMParator子系统命令集 (66)7.1.8BIN子系统命令集 (69)7.1.9STA Tistics子系统命令集 (73)7.1.10IO子系统命令集 (76)7.1.11MEMory子系统命令集 (77)7.1.12SYSTem 子系统命令集 (78)7.1.13SCPI公用命令 (81)7.2MODBUS系统命令 (83)7.2.1MODBUS协议说明 (84)7.2.2公用指令操作说明 (85)7.2.3DISP指令操作说明 (86)7.2.4FUNC指令操作说明 (86)7.2.5APER指令操作说明 (87)7.2.6TRIG指令操作说明 (87)7.2.7FETC指令操作说明 (88)7.2.8TEMP指令操作说明 (88)7.2.10BIN指令操作说明 (90)7.2.11STA T指令操作说明 (93)7.2.12IO指令操作说明 (94)7.2.13SYST指令操作说明 (94)第8章Handler接口使用说明及程序升级方法 (99)第9章包装及保修 (103)9.1标志 (103)9.2包装 (103)9.3运输 (103)9.4贮存 (103)9.5保修 (103)本说明书所描述的可能并非仪器所有内容，同惠公司有权对本产品的性能、功能、内部结构、外观、附件、包装物等进行改进和提高而不作另行说明！由此引起的说明书与仪器不一致的困惑，可通过封面的地址与我公司进行联系。
电化学综合测试系统技术参数
电化学综合测试系统技术参数设备名称：电化学综合测试系统品牌：（美国）普林斯顿型号：PARSTAT 2273一、技术参数：1、功率放大器*1.1 槽压：±100V1.2 最大电流：±2A(标配)*1.3最大功率：200W1.4 转换速率：≥15V/us1.5 升起时间：<250ns2、差分静电计*2.1输入阻抗：≥ 10e13Ω in parallel with ≤ 5pF2.2 输入偏置电流：<5 pA2.3 最大输入电压：±10V2.4差分：±10V*2.5带宽：-3dB@>15 MHZ3、IR补偿3.1正反馈范围：2000MΩ2Ω（取决于电流幅度）4、电流测量4.1 电流量程：2A-40pA*4.2 电流分辨率：1.2fA4.3 电流准确性：20μA to 2A <0.4% full scale5、交流阻抗测试5.1 频率范围：10uHz――1MHz*5.2最小交流电压幅值：0.1mV RMS5.3扫描：线性或对数6、通讯接口：USB7、软件功能7.1在WINDOWS 环境下运行32位的电化学交流阻抗软件,可进行下述测试：恒电位交流阻抗，恒电流交流阻抗，恒电位下的交流阻抗随时间变化曲线，恒电流下的交流阻抗随时间变化曲线，多波叠加技术。
Mott-Shottky技术：*可以更改参数的设置(下一个频率点,终止频率点,剩余的实验中的数据点数,频率扫描方向)可作单频,多频实验并可实时显示在数据采集期间,可以同时显示一,二,三,四种图形提供Z数学函数提供强有力的特效校正工具,使得每套电化学阻抗系统都有最佳的性能开放的数据库管理多波叠加技术,大大提高测试速度可在同一初始条件下多次连续循环并同时显示开放的Access数据库管理7.2腐蚀测试软件，能完成如下测试并实时显示a. 线性极化曲线b. 阳极极化曲线c. 塔菲尔曲线d. 动电位极化曲线e. 循环极化f. 腐蚀电位随时间的变化曲线g. 恒电流h. 恒电位i. 开路电位j. 腐蚀速率与时间曲线k. 电偶腐蚀l. 电化学噪声*允许同时控制多台恒电位仪*具有电流中断IR补偿功能*可以控制旋转电极的速度,启动/停止7.3 32位数据库管理的循环伏安软件包括：- 线性扫描- 循环伏安- 多重循环- 阶梯循环伏安- 模拟量和数字量扫描7.4阶跃测试软件包括：- 计时电流- 计时电位7.5 脉冲测试软件包括：- 电流脉冲- 电位脉冲- 方波伏安- 差分脉冲伏安- 常规脉冲伏安- 反常规脉冲伏安- 多重循环电位阶跃- 多重循环电流阶跃7.6 配备电化学阻抗等效电路拟合软件一套二、配置清单：1、恒电位/电流仪及阻抗测试仪一套2、仪器控制软件及数据拟合软件一套。
IC测试设备
数字电路测试系统美国Credence公司Electra MSR 100MHz台湾德律TR-6010 逻辑测试系统日本VTT公司V777大规模集成电路逻辑测试系统安捷伦83000 数字电路测试系统混合信号电路测试系统美国Credence公司Electra MSR 100MHz Teradyne Integra J750 Test SystemLTX Synchro/Fusion HTSZ M3650模拟电路测试系统台湾德律TR-6800电源管理器件测试机Teradyne A585/A575LTX TS80/88测试机接口板Electra MSR 100MHz客户定制型V777 测试通道扩展板-- CECC设计制作V777 测试通用接口板-- CECC设计制作IMS100用户定制型接口板-- CECC设计制作SOC器件测试系统安捷伦93000 SOC 测试系统Teradyne J971Teradyne J973LCD器件测试系统存储器测试系统Sytest Q2-52RFIC器件测试系统LTX Fusion RFTeradyne Catalyst RFAgilent Hp93000 RF测试座及夹具通用测试座特殊夹具美国Credence公司Electra MSR 100MHz美国Credence公司Electra MSR 100MHz概述·100MHz量测速率的功能验证性设备，具有Funtional Pattern产生、仿真、测试，DC参数量测等功能。
·非常适合IC设计公司进行样片芯片验证性测试及分析特性:·4M的向量存储深度/通道完整的功能Pattwen和DC参数测试系统·UNIX系统的操作软件，可视化友好界面·Shmoo Plot工具, 用于器件特性分析 ·可连接LABVIEW辅助性工具·直接连接到工作站服务器系统规格·时钟频率：100 Mhz·数据速率：200 Mbits/Sec·1.5 ns的上升和下降时间（ECL、CMOS 电路）·每个管脚的电压和负载可编程·每个管脚可编程边缘分辨率50 ps·7 bits per Channel for Simultaneous Real-time ·Compare and Data Acquisition·时钟线形稳定，偏差≦±100 ps ·系统偏差≦±1ns (ATS1)·每个管脚可选用直流精密测量单元·Window、Edge和Dual-Edge 采样·128个I/O管脚(ATS1) ·APMU：直流精密测量单元·2.1 Gb扩展图形存储器·PCI-GPIB 和PCI-VXI接口板·Sun Ultra 10 工作站系统软体功能·TestEnv：基于Xwindows的测试软件环境，包括·IMS Screens、IMS-Shmoo、TestLITE和·MATSS测试服务器·IMS-Link：提供脱机向量转换软件编辑能力和通用仿真器支持·TestVIEW (V7.2e) ：图形测试编程语言系统模组Module·Control Module x1 ·Timing module x1 · Data module x8 ·Analytical DC PMU module x1Socket Card 种类及数量·DIP Auto Socket Card 40 *1·ATS1/MSTS1 Anolog Interface Board *1 ·Force Autocal Interface Board *1 ·Open Custom DUT Interface Board *13·ATS1/MSTS Fixture Board *1·Force Autocal *1·Compare Autocal *1·IMS Adapter Board *1台湾德律TR-6010 逻辑器件测试机概述：·专为10MHz逻辑IC测试机, 具有Function Pattern测试, Dc 参数量测等功能硬件结构：特性：·2M的向量存储器深度·可4组并行测试·完整的功能Pattwen和DC参数测试·驱动电压：+-8V，比较电压：6V ·具有Shmoo Plot工具, 用于器件特性分析·测试程序调试工具·完善的测试诊断报告和柱状图·TTL和GPIB接口, 可直接连接至prober和handler ·紧凑小型，易安装资源配置：·测试控制器：奔腾III以上PC ·系统软件：MS-DOS ·电源要求：（1）单相交流，AC 110V 10A /50-60Hz （2）单相交流，AC 220V 6A /50-60Hz性能参数：·测试频率：10MHz·周期速率：100nS-1.31mS ·周期分辨率：20nS·测试通道：最大128个·多组测试：2/4组并行测试·定时器：4Pins/TG·定时器分辨率：10nS ·闸门模式：边沿式·测试向量深度：2M·驱动器：VIH：+-8V 分辨率：5mV ·VIL：+-8V 分辨率：5mV·比较器：VOH：+-8V 分辨率：5mV ·VOL：+-8V 分辨率：5mVPMU：1组/板卡，最大8组施加电压/ 测量电流范围：级别电压精确度分辨率0 10V +%+-5mV 2.5mV1 10V +%+-5mV 2.5mV2 10V +%+-5mV 2.5mV3 10V +%+-5mV 2.5mV 施加电流/ 测量电压范围：HVPMU：2组/板卡，最大16组施加电压/ 测量电流范围：施加电流/ 测量电压范围：日本VTT公司V777大规模集成电路逻辑测试系统（一）概述·10MHz的测试频率，128个测试通道，4M字节向量深度的大规模LSI测试系统系统尺寸·主框架：580(W),750(D),1200(H)或1850(H)毫米·测试头：580(W),340(D),250(H)毫米·电缆长度：4 米测试器控制器·处理器AMD-K6-500 ·操作系统MS/DOSV ·内存32MB·硬盘4.0GB·软盘3.5英寸1.44MB接口板·标准接口板针对探针机和机械手·GPIB 接口板选项PIN电子性能·标准64 PIN·全系统128 PIN 或64PIN*2DUTS软件包·语言 C (库: TURBO C)·工具软件SCHMOOHISTOGRAMWAFERMAP ·测试程序转换器ANDO-SUMMIT 至V7100 (主程序和波形程序) SENTRY 至V7100 (波形程序)CREDENCE-SC212 至V7100 (波形程序)ADVANTEST-MOSPL 至V-7100 (波形程序)驱动器·输出电压VIH 0V 至+11V VIL -2V 至+8V ·电压摆幅100mVp-p 至11Vp-p·精度0.5% + 5mV·分辨率2.7mV·最大DC 电流输出="H"±20mA 输出= "L"±20mA ·阻抗50 ± 5%ohm·升/ 降时间驱动器模式< 5ns/5Vp-p(20% 至80%) I/O 模式< 5ns/5Vp-p ·总时钟精度 (NRZ 格式) ±5ns ( 最大 ) ·时滞 (NRZ 格式 ) 有关PINS ±5ns ( 最大 )·有关TGS ±4ns ( 最大 )·上突波 / 下突波 3%+50mV· VIH/VIL 级别 4 级别·驱动器模式 FIX-HI, FIX-LO, NRZ, /NRZ, RZ, /RZ, R1, EXOR, /EXOR,·无调制·时钟的限制参照图 1条件: 10Mohm 和 15pF 载荷下一页日本VTT公司V777大规模集成电路逻辑测试系统（二）安捷伦 83000 数字电路测试系统描述：特性和用途：·用于Credence的Electra MSR 100MHz机台上，根据客户器件封装尺寸设计制作专用的定制型测试接口板，有效解决高速信号干扰之问题。
奥林巴斯 STERRAD NX 灭菌器兼容性说明 小直径柔性内镜、摄像头和附件说明书
OLYMPUS AMERICA INC.3500 Corporate ParkwayP.O. Box 610April 30, 2010Re: Compatibility of Olympus Small Diameter Flexible Endoscopes, Camera Heads andAccessories with the STERRAD ® NX Sterilizer: Technical Information for Olympus Customers in the United StatesDear Health Care Professional:This letter provides information on the material and functional compatibility of Olympus small diameter flexible endoscopes, camera heads and accessories with the STERRAD ® NX Sterilizer (STERRAD NX) manufactured by Advanced Sterilization Products (ASP), a Johnson & Johnson Company.OLYMPUS SMALL DIAMETER FLEXIBLE ENDOSCOPES Olympus is announcing the compatibility of the listed Olympus small diameter flexibleendoscopes with STERRAD NX. Olympus flexible endoscopes that are compatible with STERRAD NX are identified by the presence of a white line on the control section (see figure below). Olympus flexible endoscopes that do not contain this identifying white line are NOT compatible with STERRAD NX. If you are uncertain if an Olympus small diameter flexible endoscope is compatible with STERRAD NX, please contact Olympus. Please note that the following statements apply only to STERRAD NX. The products listed below are not compatible with STERRAD 100NX.Compatible with limitation(s): The following statements apply only to Olympus small diameter flexible endoscopes with a white line present on the control section. This white line indicates that the device is compatible with STERRAD NX in accordance with the limitations stated below. Existing Olympus endoscopes for the models listed below that do not have a white line present on the control section are NOT compatible with STERRAD NX. Contact Olympus for information on upgrading older endoscopes to be compatible with STERRAD NX.OLYMPUS AMERICA INC.3500 Corporate ParkwayP.O. Box 610Olympus has validated the material and functional compatibility of the listed Olympus endoscope models with a white line present on the control section following a minimum of 100 cycles in the STERRAD NX. Prior to 100 cycles in the STERRAD NX, cosmetic changes, such as discolorization of black anodized aluminum parts, may be observed. Following 100 cycles in the STERRAD NX, the listed models of Olympus small diameter flexible endoscopes with a white line on the control section may require a bending section or insertion tube replacement.• BF-1T60 • BF-MP60 • BF-P60 • BF-XP60 • BF-MP160F • BF-XP160F • BF-1T180 • BF-1TQ180 • BF-P180 •BF-Q180• BF-Q180-AC • CHF-P60 • CYF-5 • CYF-5A • CYF-V2 • CYF-V2R • CYF-VA2 • ENF-V2 • ENF-VT2 •ENF-VQ• LTF-V3 • LTF-VP • LTF-VP-S • LTF-VH • LTF-160 • MAF-GM • MAF-TM • URF-P5 •URF-VMaterials of the flexible endoscope may be damaged or deteriorate after 100 cycles in the STERRAD NX. Olympus testing indicates that the adhesive around the distal end lens and bending section, the bending section cover, the coating of the insertion tube and universal cord, and the insertion tube itself may be damaged or deteriorate after 100 cycles in the STERRAD NX. Damage or deterioration from STERRAD NX reprocessing may add to preexisting damage/wear from prior use, accelerating the need for endoscope maintenance. Inspect the device according to the instructions provided in the Endoscope Manual prior to each use with specific attention to the materials listed above. Below are representative examples of material damage that may be observed after 100 cycles. If any damage or deterioration of the endoscope is observed, discontinue use of the endoscope and send it to Olympus for inspection and repair. Use of a damaged endoscope may pose a risk to patient safety.Deterioration of adhesive around distal end lensBubbling of adhesive at bending section coverCracking of bendingsection coverOLYMPUS AMERICA INC.3500 Corporate ParkwayP.O. Box 610Not Compatible: All Olympus small diameter flexible endoscopes without the white line present on the control section are NOT compatible with STERRAD NX.OLYMPUS CAMERA HEADS, VIDEO ADAPTERS/COUPLERSCompatible: The following Olympus camera heads are compatible with STERRAD NX.•OTV-S7H-1D/1N/1NA•OTV-S7H-N/NA•MAJ-554Compatible with limitation(s): The following Olympus video products are compatible with STERRAD NX according to the specified limitations.Model Description Limitation(s) AR-T10EA AR-T10QA AR-T10SAVideo Adapter AR-T12EAAR-T12QA AR-T12SAVideo AdapterSTERRAD NX reprocessing mayreduce product life. Inspect prior to each use. If any irregularity is observed, replace with a new unit. OTV-S7ProH-HD-L08ECamera HeadWhen reprocessed more than 100 cycles, the surface of the camera cable may become tacky and require replacement. Inspect prior to use.Cracking of the insertion tube Peeling of the universal cord tube coating Detachment of insertion tube coating from surfaceOLYMPUS AMERICA INC.3500 Corporate ParkwayP.O. Box 610Not compatible: The following Olympus camera heads and video adapters/couplers are NOT compatible with STERRAD NX.Cameras• MH-972D/N/I • MH-973D/N/I • OTV-S6H-1F • OTV-S6H-1L• OTV-S7H-1D-F08E/L08E • OTV-S7H-FA-E/Q • OTV-S7H-1FA-E• OTV-S7H-1NA-10E/12E/12Q • OTV-S7H-NA-10E/12E/10Q/12Q • OTV-S7H-VA• OTV-S7ProH-HD-10E/10Q/12E/12Q • OTV-SP1H-N-12E/12Q • OTV-SP1H-NA-12E/12Q •MAJ-387IVideo Adapters/Couplers• A10-T1/T2 • AR-FX08E • AR-LX08E• AR-T10/10E/10Q/10S • AR-T12/12E/12Q/12S • AR-TF08E • AR-TL08E • AR-TL12S • AR-TZ2•AR-SX12E/12Q/12S • AR-ZX20 • MH-999E • MH-999Q • MH-999SOLYMPUS SURGICAL ACCESSORIESCompatible: The following Olympus surgical accessories are compatible with STERRAD NX.Model Description MAJ-1413 Light Guide AdapterMA-651 Mouthpiece MH-364 Cap MAJ-1227 Gas Supply AdapterOLYMPUS AMERICA INC.3500 Corporate ParkwayP.O. Box 610Compatible with limitation(s): The following Olympus surgical accessories are compatible with STERRAD NX according to the specified limitations.Model Description Limitation(s) MH-192 BAL plug May be difficult to attach to theendoscope after 50 cycles. In this event, replace with a new MH-192.MAJ-922 Rechargeable Miniature Light Source After 100 cycles, the light source maymalfunction. Specifically, the battery holder cover and/or buckle may break. Inspect the light source’s battery holder cover and buckle for damage, and confirm that the battery holder cover is attached firmly by the buckle according to the Instruction Manual prior to each use. If any damage or deterioration is observed, discontinue use of the light source and replace with a new light source.MAJ-1940 Cylinder Plug May be difficult to attach to theendoscope after 50 cycles. In this event, replace with a new MAJ-1940.Not compatible: The following Olympus surgical accessories are either NOT compatible or have not been tested to determine compatibility with STERRAD NX.Model Description MAJ-524 Miniature Light Source MD-493MAJ-207 Suction ValveMAJ-669MAJ-900Light Guide AdapterMAJ-943Scope connecting adapter formicroscopeSH-1 Surgical telescope holderMAJ-891 Forceps/Irrigation Plug T1079 Grasping forceps MAJ-1379 Trocar Introducer for LTF 5mm scope MAJ-1235 Injection Adapter ST-U1 Ureteroscope Sheath Dirator MAJ-659MAJ-1537 Lens Cleaning SheathMAJ-579MD-495Biopsy ValveNON-OLYMPUS REPAIRSOlympus products listed as compatible with STERRAD NX are constructed of advanced materials with improved durability against oxidizing sterilization processes. Olympus cannot guarantee that products repaired by a non-Olympus facility will be compatible with STERRAD NX. As a result, this compatibility statement is invalid for products repaired by a non-Olympus facility. Moreover, if a device is repaired by a non-Olympus facility, the corresponding product warranty may be voided.In the event that your products has been repaired by such a facility, please contact the repair facility directly for compatibility information.WARRANTYNothing contained in this letter alters, extends, or modifies in any way the authorized Olympus warranty applicable to each device or instrument. Olympus will honor the terms of the warranty stated in the respective product manuals even if damage is the result of reprocessing withSTERRAD NX, in accordance with proper reprocessing guidelines.CAUTIONS• Flexible endoscopes with multiple lumens should NOT be reprocessed with STERRAD® NX Sterilizer since these devices fall outside of the current“Indications for Use”.• Gas sterilization of some endoscopes requires the attachment of an ETO cap. If an ETO cap is required for ETO sterilization, attach the ETO cap for STERRAD sterilization. See theendoscope’s manual to determine if an ETO cap is required. For those endoscopes thatrequire an ETO cap to vent the endoscope, attach the ETO cap prior to reprocessing in theSTERRAD Sterilizer. Failure to attach the ETO Cap prior to reprocessing in the STERRADsterilizer will result in expansion and rupturing of the bending section cover when a vacuumis drawn in the sterilization chamber.• Always use an appropriate sterilization tray approved for use with the STERRAD NX Sterilizer.OLYMPUS AMERICA INC.3500 Corporate ParkwayP.O. Box 610OLYMPUS AMERICA INC.3500 Corporate ParkwayP.O. Box 610STERILIZATION EFFICACYTesting performed by Olympus only evaluated the material and functional compatibility of Olympus products with the STERRADNX sterilizer. ASP has confirmed sterilization efficacy of the listed Olympus products. Visit the STERRAD Sterility Guide at to verify that your Olympus device falls within STERRAD Systems cleared claims for sterility.If you have any questions regarding the compatibility of Olympus products with the STERRAD NX Sterilizer, contact your local Olympus sales representative or the Olympus Technical Assistance Center at 1-800-848-9024. Thank you.Sincerely,Bradley J. Catalone, Ph.D. Director of Clinical AffairsSTERRAD and STERRAD NX are registered trademarks of Johnson and Johnson Corporation.。
360度分布适配器包，多模灰色，24LC内置篝玲说明书
Gray 6 LC/UPC Internal shutters 0 Yes 24
Optical Specifications
Fiber Mode
Multimode
Environmental Specificaandards Safety Standard
IEC 61753-1 | TIA-568.3-D UL
760216796 | 360DPis-24LC-MM
360 Distribution Adapter Pack, Multimode Gray, 24 LC with internal shutters
Product Classification
Regional Availability Portfolio Product Type Product Series
Page 1 of 2
760216796 | 360DPis-24LC-MM
ISO 9001:2015 REACH-SVHC ROHS UK-ROHS
Designed, manufactured and/or distributed under this quality management system Compliant as per SVHC revision on /ProductCompliance Compliant Compliant
Packaging and Weights
Packaging quantity
1
Regulatory Compliance/Certifications
Agency CHINA-ROHS ISO 9001:2015
Classification Below maximum concentration value Designed, manufactured and/or distributed under this quality management system
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Summary and Features High efficiency, ≥85% at 120 VAC Broad dimmer compatibility (within NEMA SSL6 dimming curves) with wide selection of U.S. TRIAC-based dimmers High dimming ratio 1000:1 Enhanced user experience Flicker free, monotonic dimming, Fast monotonic start-up (<200 ms) – no perceptible delay Turn on and turn off at almost the same dimming angle – no pop-on Low cost Single-stage combined PFC and accurate primary side regulated constant current output Integrated protection and reliability features Output open circuit / output short-circuit protected with auto-recovery Fast acting line input overvoltage shutdown extends voltage withstand during line faults Without MOV can withstand ±2500 V ring wave and ±500 V differential surge Auto-recovering thermal shutdown with large hysteresis protects both components and printed circuit board Meets IEC 61000-4-5 ring wave, IEC 61000-3-2 C THD and IEC CISPR 15 / EN55015 B conducted EMI
Power Integratiห้องสมุดไป่ตู้ns, Inc. Tel: +1 408 414 9200 Fax: +1 408 414 9201
Page 2 of 44
15-Jan-13
DER-360 7.5 W PAR20 Dimmable LED Driver Using LYT4311E
Table of Contents
1 2 3 4 Introduction .................................................................................................................5 Power Supply Specification ........................................................................................7 Schematic ...................................................................................................................8 Circuit Description .......................................................................................................9 4.1 Input Filtering .......................................................................................................9 4.2 LYTSwitch Primary ..............................................................................................9 4.3 Feedback ...........................................................................................................10 4.4 Output Rectification ...........................................................................................11 4.5 TRIAC Phase Dimming Control Compatibility ....................................................11 4.6 Active Pre-Load .................................................................................................11 5 PCB Layout...............................................................................................................13 6 Bill of Materials .........................................................................................................14 7 Transformer Specification .........................................................................................16 7.1 Electrical Diagram..............................................................................................16 7.2 Electrical Specifications .....................................................................................16 7.3 Materials ............................................................................................................16 7.4 Transformer Build Diagram ................................................................................17 7.5 Transformer Construction ..................................................................................17 8 Transformer Design Spreadsheet .............................................................................18 9 Performance Data .....................................................................................................20 9.1 Efficiency ...........................................................................................................20 9.2 Line and Load Regulation ..................................................................................21 9.3 Power Factor .....................................................................................................22 9.4 A-THD................................................................................................................23 9.5 Test Data ...........................................................................................................24 9.5.1 Test Data, 12 V LED Load ..........................................................................24 9.5.2 Test Data, 15 V LED Load ..........................................................................24 9.5.3 Test Data, 18 V LED Load ..........................................................................24 10 Dimming Performance Data......................................................................................25 10.1 Dimming Curve with Simulated (Using Agilent 6812B AC Source) Leading Edge Dimmer .........................................................................................................................25 10.2 Fast Start-up (<200 ms) with TRIAC-Based Dimmer .........................................26 10.3 Pop-on Point with TRIAC-based Dimmer ..........................................................27 10.4 Output Current and Input Current Waveforms with Dimmer ..............................28 10.5 Compatibility List................................................................................................29 10.6 IR Thermal Profile ..............................................................................................33 10.7 Output Current and Output Voltage Waveform at Normal Operation .................34 10.8 Output Voltage and Output Current Waveform at Start-up ................................35 10.9 Drain Voltage and Current at Normal Operation ................................................35 10.10 Drain Voltage and Current at Start-up ............................................................36 10.11 Drain Voltage and Current at Output Short Condition ....................................37 10.12 Output Diode Voltage and Current Waveform at Normal Operation...............38 11 Non-Dimming Waveforms .........................................................................................39 11.1 Output Current and Input Current Waveforms ...................................................39