C522C479K1R5TA中文资料
HMM55C20资料
Page No. : 1/3 HMM55C SeriesZENER DIODESMaximum Zener Impedance Maximum Reverse Leakage CurrentDevice Type NominalZenerVoltageVzat Izt*(V)TestCurrentIzT(mA)ZzTatIzT(Ω)ZzkatIzk=1mA(Ω)TypicalTemperatureCoefficient(%/°C)IR(uA)Test-Voltagesuffix B (V)MaximumRegulatorCurrentIzM(mA)HMM55C2V0 1.9-2.151001000-0.070150 1.0200 HMM55C2V4 2.28-2.56585600-0.07050 1.0150 HMM55C2V7 2.5-2.9585600-0.07010 1.0135 HMM55C3V0 2.8-3.2585600-0.0704 1.0125 HMM55C3V3 3.1-3.5585600-0.0652 1.0115 HMM55C3V6 3.4-3.8585600-0.0602 1.0105 HMM55C3V9 3.7-4.1585600-0.0502 1.095 HMM55C4V3 4.0-4.6575600-0.0251 1.090 HMM55C4V7 4.4-5.0560600-0.0100.5 1.085 HMM55C5V1 4.8-5.4535550+0.0150.1 1.080 HMM55C5V6 5.2-6.0525450+0.0250.1 1.070 HMM55C6V2 5.8-6.6510200+0.0350.1 2.064 HMM55C6V8 6.4-7.258150+0.0450.1 3.058 HMM55C7V57.0-7.95750+0.0500.1 5.053 HMM55C8V27.7-8.75750+0.0500.1 6.047 HMM55C9V18.5-9.651050+0.0600.17.043 HMM55C109.4-10.651570+0.0700.17.540 HMM55C1110.4-11.652070+0.0700.18.536 HMM55C1211.4-12.752090+0.0700.19.032 HMM55C1312.4-14.1526110+0.0700.11029 HMM55C1513.8-15.6530110+0.0700.11127 HMM55C1615.3-17.1540170+0.0700.11224 HMM55C1816.8-19.1550170+0.0700.11421 HMM55C2018.8-21.2555220+0.0700.11520 HMM55C2220.8-23.3555220+0.0700.11718 HMM55C2422.8-25.6580220+0.0800.11816 HMM55C2725.1-28.9580220+0.0800.12014 HMM55C3028-32580220+0.0800.12213 HMM55C3331-35580220+0.0800.12412 HMM55C3634-38580220+0.0800.12711 HMM55C3937-41 2.590500+0.0800.13010 HMM55C4340-46 2.590600+0.0800.1339.2 HMM55C4744-50 2.5110700+0.0800.1368.5 Note: 1.Standard Voltage Tolerance is ±5% and Suffix "A" for ±1%, Suffix "B" for ±2%, Suffix "C" for ±5%, Suffix "D" for ±20%2.*Measured With Pulses Tp= 20m Sec.Page No. : 2/3 Absolute Maximum RatingsCharacteristics Symbol Value Unit Zener Current see Table “Characteristics”---Power Dissipation at Tamb=25°C Ptot500*mW Junction Temperature Tj175°C Storage Temperature Range Ts-55 to +175°C*Valid provided that leads are kept at ambient temperature at a distance of 8mm from case. Characteristics (Tamb=25°C)Characteristics Symbol Min Typ Max Unit Thermal Resistance Junction to Ambient Air RthA--0.3*K/mW Forward Voltage at IF=100mA VF--1V *Valid provided that leads at a distance of 10mm from case are kept at ambient temperature. Characteristics CurvePage No. : 3/3Important Notice:• All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC.• HSMC reserves the right to make changes to its products without notice.•HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.• HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory:•Head Office (Hi-Sincerity Microelectronics Corp.): 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C.Tel: 886-2-25212056 Fax: 886-2-25632712, 25368454•Factory 1: No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.CTel: 886-3-5983621~5 Fax: 886-3-5982931。
476c钽电容参数
476c钽电容参数
（实用版）
目录
1.钽电容的概述
2.476c 钽电容的参数
3.476c 钽电容的应用领域
4.钽电容的优缺点
正文
【钽电容的概述】
钽电容是一种常见的电容器，具有体积小、容量大、漏电流小、稳定性高等优点。
钽电容广泛应用于通信、计算机、家电等领域，有着重要的作用。
【476c 钽电容的参数】
476c 钽电容的具体参数并未在文本中提供，但是钽电容的主要参数包括额定电压、容量、漏电流、工作温度等。
不同的钽电容型号，其参数可能会有所不同。
【476c 钽电容的应用领域】
钽电容广泛应用于各种电子设备中，如手机、电脑、电视等，其稳定的性能和优秀的电容特性使其成为电子工程师的首选元件。
【钽电容的优缺点】
钽电容的优点主要有：体积小、容量大、漏电流小、稳定性高、寿命长等。
但是，钽电容也有其缺点，比如价格相对较高，且在使用过程中需要注意其工作电压和电流，以避免电容损坏。
总的来说，钽电容是一种重要的电子元件，其优秀的性能使其在电子
设备中得到了广泛的应用。
常用电子制作IC型号、功能介绍全集
74HC573D 存储集成电路
IX0388CE 中频放大集成电路
SAA5290ZP 微处理集成电路
74HCT157 多路转换双输入集成电路 IX0411CEN1 微处理集成电路
SAA5297 微处理集成电路
74HCT4046A 压控振荡集成电路
IX0412CE 字符发生集成电路
微处理集成电路
74HC245 总线收发集成电路
理集成电路
SAA5261 电视信号处理集成电路
74HC32 或门四 2 输入集成电路
IX0365CE 伴音功率放大集成电路
SAA5281ZP 电视信号处理集成电路
74HC374 八 D 触发集成电路
IX0371GE 磁头控制集成电路
SAA5284 电视信号处理集成电路
87CK38N-3584 微处理集成电路
理集成电路
SAA9050 色度解码集成电路
87CK38N-3627 微处理集成电路
IX0603CE 视频、色度信号处理集成电路 SAA9051 色度解码集成电路
89C52 系统控制处理集成电路
IX0605CE 微处理集成电路
SAA9055 色度解码集成电路
89C55 系统控制处理集成电路
20810-F6096 存储集成电路
集成电路
路
2252B 微处理集成电路
IX0062CE 图像中频放大、视频放大集成电 S1D2503X01 视频信号处理 200MHz 集成
24C01ACEA 存储集成电路
路
电路
24C026 存储集成电路
IX0064CE 图像中频放大、检波、视频放大 S1D2512X01 偏转信号处理集成电路
74HC04 逻辑与非门集成电路
2SC4793中文资料
TOSHIBA Transistor Silicon NPN Epitaxial Type2SC4793Power Amplifier ApplicationsDriver Stage Amplifier Applications• High transition frequency: f T = 100 MHz (typ.) • Complementary to 2SA1837Absolute Maximum Ratings (Tc = 25°C)Characteristics Symbol Rating UnitCollector-base voltage V CBO 230 V Collector-emitter voltage V CEO 230 V Emitter-base voltage V EBO 5 V Collector current I C 1 A Base current I B 0.1 A Ta = 25°C 2.0 Collector powerdissipationTc = 25°CP C20WJunction temperature T j 150 °C Storage temperature rangeT stg−55 to 150°CNote: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change intemperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).Unit: mmJEDEC― JEITA ―TOSHIBA 2-10R1AWeight: 1.7 g (typ.)Electrical Characteristics (Tc = 25°C)Typ.Max UnitCondition Min Characteristics Symbol TestCollector cut-off current I CBO V CB = 230 V, I E = 0 ―― 1.0 μA Emitter cut-off current I EBO V EB = 5 V, I C = 0 ―― 1.0 μA Collector-emitter breakdown voltage V (BR) CEO I C = 10 mA, I B = 0 230 ―― V DC current gain h FE V CE = 5 V, I C = 100 mA 100 ― 320Collector-emitter saturation voltage V CE (sat)I C = 500 mA, I B = 50 mA ―― 1.5 V Base-emitter voltage V BE V CE = 5 V, I C = 500 mA ―― 1.0 V Transition frequency f T V CE = 10 V, I C = 100 mA ― 100 ― MHz Collector output capacitance C ob V CB = 10 V, I E = 0, f = 1 MHz ― 20 ― pF MarkingC4793lead (Pb)-free package orlead (Pb)-free finish.Collector-emitter voltage V CE (V) I C – V CEC ol le c t o r c u r r e n tI C (A )Base-emitter voltage V BE (V)I C – V BEC o l l ec t o r c u r r e n t I C(A )Collector current I C (A)V CE (sat) – I CD C c u r r e n t g a i nh F ECollector current I C (A)V CE (sat) – I CC o l l e c t o r -e m i t t e r s a t u r a t io n vo l t a g e V C E (s a t )(V )Collector current I C (mA) f T – I CT r a n s it i on f r e q u e n c yf T (M H z )Collector-emitter voltage V CE (V)Safe Operating AreaC o l l e c t o r c u r r e n t I C (A )131030 100 300RESTRICTIONS ON PRODUCT USE20070701-EN •The information contained herein is subject to change without notice.•TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.•The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties.• Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.。
tmc2210中文规格书
tmc2210中文规格书TMC2210中文规格书一、产品介绍TMC2210是一款先进的步进电机驱动器，具有高性能和高精度的特点。
该驱动器采用了最新的技术，为用户提供了更好的驱动体验。
TMC2210适用于各种领域，如工业自动化、机器人、3D打印等。
二、主要特点1. 高精度：TMC2210采用了先进的运动控制算法，能够实现高精度的步进电机驱动，确保运动的平稳和准确性。
2. 低噪音：该驱动器通过改进的电流控制和电机驱动技术，降低了噪音水平，提供了更加安静的工作环境。
3. 高效能：TMC2210的电源效率非常高，能够最大程度地利用电能，减少能源浪费。
4. 多种保护功能：该驱动器具有过流保护、过温保护、欠压保护等多种保护功能，可以有效保护电机和驱动器的安全运行。
5. 简化设计：TMC2210的设计紧凑，可以方便地集成到各种设备中，简化了系统的设计和安装。
三、技术参数1. 电源电压范围：5V-28V2. 驱动电流：最大2.5A3. 步进角度：1.8°4. 步进分辨率：最大256微步5. 控制接口：SPI、UART6. 工作温度范围：-40°C至+85°C7. 封装形式：QFN48四、应用领域TMC2210广泛应用于各种领域，包括：1. 工业自动化：TMC2210可以用于控制各种工业设备，如数控机床、印刷机、包装机等。
2. 机器人：该驱动器可以用于机器人的关节控制，提供高精度和高效能的驱动能力。
3. 3D打印：TMC2210可以用于3D打印机的各个轴的驱动，实现高精度和高速度的打印。
五、总结TMC2210是一款高性能的步进电机驱动器，具有高精度、低噪音和高效能的特点。
该驱动器适用于工业自动化、机器人和3D打印等领域。
它的多种保护功能和简化设计使其成为用户的首选。
希望通过本规格书的介绍，能够使用户更好地了解TMC2210的特点和应用。
超值独显本、相机镜头、空气净化器、榨汁机热销排行榜
超值独显本 热销排行榜从游戏玩家的角度考虑，显卡无疑是笔记本电脑配置的重中之重，拥有好的独立显卡，可以使游戏过程更顺畅，让玩家在游戏中充分展现自己的实力。
不过，对于学生玩家来说，挑选配置的同时自然也要考虑自己的腰包，都希望以最少的花费获取最高性能的配置。
下面，小编将结合鼎好商城2014年2月份的销售数据，为大家推荐10款热销的超值独显本。
无论看视频还是玩游戏，都能获得更加震撼的体验。
3ThinkPad E430c （33651J8）CPU 2.5GHz Intel 酷睿i5 3210M 内存4GB DDR3硬盘500GB 显卡容量2GB屏幕14英寸 1366×768操作系统Linux摄像头720p HD摄像头产品重量 2.15Kg 鼎好参考价3900元热销排行NO.4NO.5NO.6NO.7NO.8NO.9NO.10产品型号华硕S46E3317CB-SL 索尼F1431AYCW 戴尔Inspiron 14R（Ins14RD-4528T）惠普CQ45-m02TX ThinkPad E440（20C5S00500）苹果MacBook Pro （MD101CH/A ）东芝C40-AS22W1CPU 1.7GHz Intel 酷睿i5 3317U 1.6GHz Intel 酷睿i5 4200U 1.6GHz Intel 酷睿i5 4200U 2.6GHz Intel 酷睿i5 3230M 2.5GHz Intel 酷睿i5 4200M 2.5GHz Intel 酷睿i5 3210M 2.5GHz Intel 酷睿i5 4200M 内存4GB DDR34GB DDR3L 4GB DDR3L 4GB DDR34GB DDR3L 4GB DDR34GB DDR3硬盘24GB+500GB 500GB 500GB 750GB 500GB 500GB 750GB 显卡容量2GB2GB2GB1GB2GB共享内存容量1GB屏幕14英寸 1366×76814英寸 1366×76814英寸 1366×76814英寸 1366×76814英寸 1366×76813.3英寸 1280×80014英寸 1366×768操作系统预装Windows 8Linux预装Windows 8.1DOS LinuxMac OS X Mavericks DOS 摄像头集成摄像头720p HD摄像头 集成摄像头集成摄像头720p HD摄像头集成摄像头720p HD摄像头 产品重量2Kg 2.2Kg 未详 2.2Kg 2.14Kg 2.06Kg 2Kg 鼎好参考价4580元4300元5000元3400元4450元7600元3850元2Acer E1-471G-53234G50MnksCPU 2.6GHz Intel 酷睿i5 3230M 内存4GB DDR3硬盘500GB 显卡容量1GB屏幕14英寸 1366×768操作系统Linux摄像头集成130万像素摄像头产品重量 2.4Kg 鼎好参考价3300元联想 Y400N-IFI （T ）CPU 2.6GHz Intel 酷睿i5 3230M 内存4GB DDR3硬盘1TB 显卡容量2GB屏幕14英寸 1366×768操作系统预装Windows 8摄像头集成摄像头产品重量 2.2Kg 鼎好参考价3800元1P roducts Information商品集装箱相机镜头 热销排行榜广角、长焦、微距、变焦、定焦、全画幅、APS画幅……如今，相机镜头的种类越来越丰富，这无疑是摄影爱好者的福音，因为他们有了更多选择的余地，也可以享受不同镜头的魅力。
黑色烤麦当劳60 x 60 cm烤麦当劳机，型号为HET557BB1C，包含一系列附件说明书
Serie 6, Cucina da incasso, 60 x 60cm, NeroHET557BB1CAccessori integrati1 x Griglia combinata, 1 x Leccarda universale smaltata,2 x Leccarda profonda slim sizeAccessori specialiHEZ538200 Guide telescopiche a 2 livelli, HEZ538S00 Guide telescop. a 2 livelli+1 guida clip, HEZ625071 Teglia per grigliare adatta a pirolisi, HEZ633001 Coperchio per tegame professionale, HEZ633070 Tegame professionale, HEZ634000 Griglia combinata 455x375x31 mm (LxPxA), HEZ636000 Leccarda in vetro 455x364x30 mm (LxPxA), HEZ638000 Guide telescopiche clip a 1 livello,HEZ638200 Set griglie telesc.2 liv.ad pl, HEZ638300 Set griglie telesc.3 liv.ad pl, HEZ660050 Accessory,HEZ664000 Griglia combinata 455x375x59 mm (LxPxA), HEZ915003 Pirofila in vetro con coperchio 5,4 l., HEZ317000 Teglia per pizza, HEZ327000 Pietra per pane e pizza, HEZ333001 Coperchio per leccarda extra profonda, HEZ530000 2 leccarde slim 455x188x39 mm (LxPxA), HEZ531000 Leccarda bassa 455x375x30 mm (LxPxA), HEZ531010 Leccarda antiaderen 455x375x30mm (LxPxA),HEZ532000 Leccarda profonda 455x375x38 mm (LxPxA), HEZ532010 Leccarda antiaderen 455x400x38mm (LxPxA), HEZ533000 Leccarda profonda 455x375x81 mm (LxPxA), HEZ538000 Guide telescopiche clip a 1 livello Il piano cottura da incasso con AutoPilot: cucina perfettamente le vostre pietanze in modo automatico.• Aria Calda 3D: distribuisce uniformemente il calore su tutti e tre i livelli per risultati sempre perfetti.• EcoClean Direct: facile pulizia grazie a un rivestimento che dissolve il grasso durante la cottura.Dati tecniciDa incasso / a libera installazione: .....................................Da incasso Sistema di pulizia: ....................Idrolisi, Catalisi totale, Catalisi totale Dimensioni del vano per l'installazione: 600-604 x 560-568 x 550 mm Dimensioni del prodotto: ....................................595 x 594 x 548 mm Dimensioni del prodotto imballato: ....................675 x 690 x 660 mm Materiale del cruscotto: ..............................................................vetro Materiale porta: ..........................................................................vetro Peso netto: ..............................................................................34.4 kg Volume utile: .................................................................................71 l Metodo di cottura: ....Grill a superficie grande, Aria calda dolce, aria calda, riscaldamento superiore/infer., aria calda intensiva, riscaldamento inferiore, grill ventilatoMateriale della cavit: ...................................................................Altro Regolazione della temperatura: ..........................................Meccanico Numero di luci interne: (1)Codice EAN: (4242005029617)Number of cavities (2010/30/EC): (1)Classe di efficienza energetica: .........................................................A Energy consumption per cycle conventional (2010/30/EC): ........0.97 kWh/cycleEnergy consumption per cycle forced air convection (2010/30/EC):0.81 kWh/cycleIndice di efficienza energetica (2010/30/CE): ..........................95.3 % Potenza: ................................................................................11200 W Corrente: ..................................................................................3*16 A Tensione: ...................................................................................400 V Frequenza: ...........................................................................60; 50 Hz Tipo di spina: ....................................senza spina, collegamento fisso Accessori inclusi: .......1 x Griglia combinata, 1 x Leccarda universale smaltata, 2 x Leccarda profonda slim sizeSerie 6, Cucina da incasso, 60 x 60cm, NeroHET557BB1CIl piano cottura da incasso con AutoPilot: cucina perfettamente le vostre pietanze in modo automatico.Tipo di forno e modi di riscaldamento- Volume interno: 71 l- Riscaldamento rapido- Impostazione della temperatura 50 °C - 275 °CDesign- Illuminazione interna alogena- XXL- Forno con email granitComfort- Funzionamento con display LCD- AutoPilot-Programmi automatici 10- Orologio elettronico- Indicazione di preriscaldamento- AUTOSTART AutoPilot-Programmi automatici- Cerniera in basso, Porta cucine SoftClose, Porta del forno con Soft Open e Soft ClosePulizia- Programma-EcoClean Direct, Assistenza alla pulizia (pulizia con idrolisi)- Pulizia Eco Clean Direct per parete posteriore, Pannello posteriore e pannelli laterali autopulenti con Eco Clean Direct Plus, soffitto Ambiente e Sicurezza- Sicurezza bambini- Spia di calore residuo- Porta Comfort con max. 40 ° C- (Misurata a 180 ° C la temperatura del forno / riscaldamento superiore e inferiore/ dopo 1 ora di centrale della finestra) Accessorio:- 1 x Griglia combinata, 1 x Leccarda universale smaltata, 2 x Leccarda profonda slim sizeInformazioni tecniche- Dimensioni nicchia (AxLxP): 600 mm - 604 mm x 560 mm - 568 mm x 550 mm- Dimensioni apparecchi (AxLxP): 595 mm x 594 mm x 548 mm- Potenza max. assorb. (elettr.): 11.2 kW- Classe di efficienza energetica (acc. EU Nr. 65/2014): A- Consumo energetico per ciclo durante funzionamento convenzionale:0.97 kWh- Consumo energetico per ciclo durante funzionamento ventilato:0.81 kWh- Numero di cavità: 1 Tipo di alimentazione: elettrica Volume della cavità:71 lSerie 6, Cucina da incasso, 60 x 60cm, NeroHET557BB1C。
NUC微控制器产品系列说明书
M251 Feature
。 Arm® Cortex®-M23 。 运行速度可达 48 MHz
M252 Feature
。 USB 2.0 全速设备无需外 挂晶振
M253 Feature
。 USB 2.0 全速设备无需外 挂晶振
。 高达五路 UART 。 CAN FD x1
2
Low Power
TrustZone
AEC-Q100
Market Trend
随着电子应用对低功耗或电池供电的需 求日益增加，现今的应用必须尽量降低 能源消耗，甚至在极端情况下，可能需 要倚赖单颗电池来维持长达 15 至 20 年 运转
低功耗应用情景包含手持式设备、居家、 AIoT、IIoT (工业物联网) 等应用情景， 使用范围十分广泛
(Programmable Serial I/O) • USB 2.0 全速装置无需外挂晶振 • 独立的 RTC 电源 VBAT 管脚
Highlight
• 支持 1.8 V ~ 5.5 V 串行接口，可连接不同电压 装置
*USCI: Universal Serial Control Interface Controller
C
1.8 3.3 5 M253
CU
3.3 5 M071
1.8 3.3 5 M252
U
3.3 5 M051
1.8 3.3 5 M251
3.3 5 Mini51
3.3 5 3.3 5
1.8 3.3 Nano100
M480 M460 M471 M453 M452 M451
E CU E CU
U C
U
Arm9™
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
CERAMIC MOLDED AXIAL & RADIAL PERFORMANCE CHARACTERISTICSGENERALWorking Voltage:C0G–50, 100 & 200 VoltsX7R–50, 100 & 200 VoltsTemperature Characteristics:C0G–0 ±30 PPM/°C from -55°C to +125°CX7R–±15% from -55°C to +125°CCapacitance Tolerance:C0G–±0.5 pF, ±1%, ±2%, ±5%, ±10%, ±20%(±0.5 pF is tightest available tolerance) X7R–±10%, ±20%, -0 +100%, -20% +80% Construction:Monolithic block of ceramic dielectric with interdigitated internal electrodes, encapsulated in a molded case, and having axial or radial leads. Meets flame test requirements of UL Standard 94V-0.Terminal Strength:EIA-198 Method 303 Condition A (2.2 kg)ELECTRICALCapacitance:Within specified tolerance when measured with 1 volt rms at 1 kHz (1000 pF or less at 1 MHz for C0G). Dissipation Factor:25°C at 1 kHz (1000 pF or less at 1 MHz for C0G).C0G–.15% maximumX7R–2.5% maximumInsulation Resistance:After 2 minutes electrification at 25°C and rated voltage C0G–100K megohms or 1000 megohm - µF, whichever is less.X7R–100K megohms or 1000 megohm - µF, whichever is less.Dielectric Withstanding Voltage:250% of rated voltage for 5 seconds with current limited to 50 mA at 25°C.Life Test:2000 hours at 200% of rated voltage at 125°C. Post-Test limits at 25°C are:Capacitance Change:C0G–less than 3% or 0.25 pF, whichever is higherX7R–±20% of initial valueDissipation Factor:C0G–.25% maximumX7R–3.0% maximumInsulation Resistance:C0G–10K megohms or 100 megohm - µF, whicheveris lessX7R–10K megohms or 100 megohm - µF, whicheveris lessDielectric Withstanding Voltage:250% of rated voltage for 5 seconds with currentlimited to 50 mA.ENVIRONMENTALMoisture Resistance:MIL-STD-202, Method 106, or EIA-198, Method 204,Condition A, except 20 cycles.Insulation Resistance:C0G–10K megohms or 100 megohm - µF, whicheveris lessX7R–10K megohms or 100 megohm - µF, whicheveris lessDielectric Withstanding Voltage:250% of rated voltage for 5 seconds with currentlimited to 50 mA.Immersion Cycling:MIL-STD-202, Method 104, Condition B. Post-Test limitsat 25°C are:Insulation Resistance:C0G–10K megohms or 100 megohm - µF, whicheveris lessX7R–10K megohms or 100 megohm - µF, whicheveris lessSolderability:MIL-STD-202, Method 208, Sn62 solder, 245°C for 5 ±1/2seconds.Resistance to Soldering Heat:MIL-STD-202, Method 210, Condition B (260°C, 10 secs).Depth of immersion — to a minimum of .050" from thecapacitor body.Lead Material:Axial: Solder-coated copper clad steelRadial: Solder-coated copper standard; 100% tin plated optional© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 20© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630021CERAMIC MOLDED/AXIAL & RADIAL - STANDARDDIMENSIONS—INCHES & (MILLIMETERS)CASE MILITARYSIZE EQUIVALENT STYLESLDCC114.160 ±.010 (4.06 ±.25).090 ±.010 (2.29 ±.25).020, +.000, -.003 (.51, +.00, -.08)C124.250 ±.010 (6.35 ±.25).090 ±.010 (2.29 ±.25).020, +.000, -.003 (.51, +.00, -.08)C192.390 ±.010 (9.91 ±.25).140 ±.010 (3.56 ±.25).025, +.004, -.001 (.64, +.10, -.025)C202.500 ±.020 (12.70 ±.51).250 ±.015 (6.35 ±.38).025, +.004, -.001 (.64, +.10, -.025)C222.690 ±.030 (17.53 ±.76).350 ±.020 (8.89 ±.51).025, +.004, -.001 (.64, +.10, -.025)CAPACITOR OUTLINE DRAWINGS — (AXIAL LEADS)CC75, CCR75CK12, CKR11CC76, CCR76CK13, CKR12CC77, CCR77CK14, CKR14CC78, CCR78CK15, CKR15CC79, CCR79CK16, CKR16CAPACITOR OUTLINE DRAWINGS — (RADIAL LEADS)DIMENSIONS—INCHES & (MILLIMETERS)MILITARY S CASE EQUIVALENT H L W LEAD SIZE STYLES HEIGHTLENGTHWIDTHSPACINGC052.190 ±.010 (4.83 ±.25).190 ±.010 (4.83 ±.25).090 ±.010 (2.29 ±.25).200 ±.015 (5.08 ±.38)C062.290 ±.010 (7.37 ±.25).290 ±.010 (7.37 ±.25).090 ±.010 (2.29 ±.25).200 ±.015 (5.08 ±.38)C512.480 ±.020 (12.19 ±.51).480 ±.020 (12.19 ±.51).140 ±.010 (3.56 ±.25).400 ±.020 (10.16 ±.51)C522.480 ±.020 (12.19 ±.51).480 ±.020 (12.19 ±.51).240 ±.010 (6.10 ±.25).400 ±.020 (10.16 ±.51)CC05, CCR05CK05, CKR05CC06, CCR06CK06, CKR06CC07, CCR07CC08, CCR08For packaging information, see pages 39, 40 and 41.C e r a m i c M o l d e d A x i a l /R a d i a l - S t a n d a r dCERAMIC MOLDED/AXIAL & RADIAL - STANDARD© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630022K 102052C 5C A R 2C CERAMIC*CASE SIZE(See Table Below)SPECIFICATIONStandardC — StandardCAPACITANCEIn picofarad code: First two digits are significant figures and third is number of zeroes following (except 9 indicates division by 10). Examples:0.1 F = 100,000 pF = 104 and 9.1 pF = 919.See tables for Standard Values.FAILURE RA TEINTERNAL CONSTRUCTIONCAPACITANCE TOLERANCEStandard M —±20%K —±10%J —±5%A — Not Applicable (Std.)LEAD MATERIALC — Standard5 — StandardWORKING VOLTAGE1—1002—2005—50Others H —±3%G —±2%F —±1%D —±.5 pFTEMPERATURE CHARACTERISTICCap. Change With Temp.Measured WithoutKEMET EIA Temp.DC Bias Designator EquivalentRange, °C Voltage G C0G -55 to ±30(Ultra (NPO)+125ppm/°CStable)R X7R -55 to ±15%(Stable)+125Standard tolerances for each Series are shown in the repetitive parts lists.*CASE SIZES RADIAL AXIAL C052C114C062C124C512C192C522C202C222****Part Number Example: C052C102K2R5CA (14 digits – no spaces)ORDERING INFORMATIONAXIAL CAPACITOR MARKINGSTANDARD C114C, C124C, C192C, C202C & C222CKC0G 101J 200V 0512KEMET, Temperature Characteristic Capacitance, Capacitance Tolerance Voltage Date CodeRADIAL CAPACITOR MARKINGC052C & C062C STANDARD MARKING100VK 0511Voltage KEMET Date CodeBACK C062X7R 104KFRONTStyleTemperature CharacteristicCapacitance, Capacitance ToleranceC512 & C522 STANDARD MARKINGKEMET C512X7R 105K 50V0532KEMETSIZE and Temperature CharacteristicCapacitance, Capacitance Tolerance, Voltage Date CodeT — 100% Tin plated (C052, C062 only)© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630023C e r a m i c M o l d e d A x i a l /R a d i a l - S t a n d a r dCAPACITANCEKEMET pFPART NUMBER200 VOLT — C202 STANDARD C0G 5,600.0C202C562(4)2G5CA 6,800.0C202C682(4)2G5CA 8,200.0C202C822(4)2G5CA 10,000.0C202C103(4)2G5CA 12,000.0C202C123(4)2G5CA 15,000.0C202C153(4)2G5CA 18,000.0C202C183(4)2G5CA 22,000.0C202C223(4)2G5CA 100 VOLT — C202 STANDARD C0G 10,000.0C202C103(4)1G5CA 12,000.0C202C123(4)1G5CA 15,000.0C202C153(4)1G5CA 18,000.0C202C183(4)1G5CA 22,000.0C202C223(4)1G5CA 27,000.0C202C273(4)1G5CA 33,000.0C202C333(4)1G5CA 200 VOLT — C222 STANDARD C0G 27,000.0C222C273(4)2G5CA 33,000.0C222C333(4)2G5CA 39,000.0C222C393(4)2G5CA 47,000.0C222C473(4)2G5CA 100 VOLT — C222 STANDARD C0G 39,000.0C222C393(4)1G5CA 47,000.0C222C473(4)1G5CA 56,000.0C222C563(4)1G5CA 68,000.0C222C683(4)1G5CA 82,000.0C222C823(4)1G5CA 100,000.0C222C104(4)1G5CACERAMIC MOLDED/AXIAL – STANDARDULTRA-STABLE TEMPERATURE CHARACTERISTIC—C0G (NP0)CAPACITANCEKEMET pFPART NUMBER200 VOLT — C124 STANDARD C0G390.0C124C391(4)2G5CA 470.0C124C471(4)2G5CA 560.0C124C561(4)2G5CA 100 VOLT — C124 STANDARD C0G820.0C124C821(4)1G5CA 1,000.0C124C102(4)1G5CA 200 VOLT — C192 STANDARD C0G680.0C192C681(4)2G5CA 820.0C192C821(4)2G5CA 1,000.0C192C102(4)2G5CA 1,200.0C192C122(4)2G5CA 1,500.0C192C152(4)2G5CA 1,800.0C192C182(4)2G5CA 2,200.0C192C222(4)2G5CA 2,700.0C192C272(4)2G5CA 3,300.0C192C332(4)2G5CA 3,900.0C192C392(4)2G5CA 4,700.0C192C472(4)2G5CA 100 VOLT — C192 STANDARD C0G 1,200.0C192C122(4)1G5CA 1,500.0C192C152(4)1G5CA 1,800.0C192C182(4)1G5CA 2,200.0C192C222(4)1G5CA 2,700.0C192C272(4)1G5CA 3,300.0C192C332(4)1G5CA 3,900.0C192C392(4)1G5CA 4,700.0C192C472(4)1G5CA 5,600.0C192C562(4)1G5CA 6,800.0C192C682(4)1G5CA 8,200.0C192C822(4)1G5CARATINGS & PART NUMBER REFERENCECAPACITANCEKEMET pFPART NUMBER200 VOLT — C114 STANDARD C0G1.0C114C109(1)2G5CA 1.5C114C159(1)2G5CA2.2C114C229(1)2G5CA 2.7C114C279(1)2G5CA3.3C114C339(1)2G5CA 3.9C114C399(1)2G5CA4.7C114C479(1)2G5CA5.6C114C569(1)2G5CA6.8C114C689(1)2G5CA 8.2C114C829(1)2G5CA 10.0C114C100(2)2G5CA 12.0C114C120(2)2G5CA 15.0C114C150(2)2G5CA 18.0C114C180(2)2G5CA 22.0C114C220(2)2G5CA 27.0C114C270(3)2G5CA 33.0C114C330(3)2G5CA 39.0C114C390(3)2G5CA 47.0C114C470(3)2G5CA 56.0C114C560(4)2G5CA 68.0C114C680(4)2G5CA 82.0C114C820(4)2G5CA 100.0C114C101(4)2G5CA 120.0C114C121(4)2G5CA 150.0C114C151(4)2G5CA 180.0C114C181(4)2G5CA 220.0C114C221(4)2G5CA 270.0C114C271(4)2G5CA 330.0C114C331(4)2G5CA 100 VOLT — C114 STANDARD C0G82.0C114C820(4)1G5CA 100.0C114C101(4)1G5CA 120.0C114C121(4)1G5CA 150.0C114C151(4)1G5CA 180.0C114C181(4)1G5CA 220.0C114C221(4)1G5CA 270.0C114C271(4)1G5CA 330.0C114C331(4)1G5CA 390.0C114C391(4)1G5CA 470.0C114C471(4)1G5CA 560.0C114C561(4)1G5CA 680.0C114C681(4)1G5CANOTE 1:Insert proper symbol for capacitance tolerance as follows:(1) 1.0 pF to 8.2 pF: D— ±.5 pF(2) 10.0 pF to 22 pF: J— ±5%, K— ±10%(3) 27.0 pF to 47 pF: G— ±2%, J— ±5%, K— ±10%(4) 56.0 pF and up: F— ±1%,G— ±2%, J— ±5%, K— ±10%NOTE 1:Insert proper symbol for capacitance tolerance as follows:(1) 1.0 pF to 8.2 pF: D— ±.5 pF(2) 10.0 pF to 22 pF: J— ±5%, K— ±10%(3) 27.0 pF to 47 pF: G— ±2%, J— ±5%, K— ±10%(4) 56.0 pF and up: F— ±1%,G— ±2%, J— ±5%, K— ±10%NOTE 1:Insert proper symbol for capacitance tolerance asfollows:(1) 1.0 pF to 8.2 pF: D— ±.5 pF(2) 10.0 pF to 22 pF: J— ±5%, K— ±10%(3) 27.0 pF to 47 pF: G— ±2%, J— ±5%, K— ±10%(4) 56.0 pF and up: F— ±1%,G— ±2%, J— ±5%, K— ±10%CERAMIC MOLDED/RADIAL – STANDARD ULTRA-STABLE TEMPERATURE CHARACTERISTIC—C0G (NP0)24RATINGS & PART NUMBER REFERENCECAPACITANCE KEMETpF PART NUMBER200 VOLT — C062 SIZE C0G3,300.0C062C332(4)2G5CA3,900.0C062C392(4)2G5CA4,700.0C062C472(4)2G5CA5,600.0C062C562(4)2G5CA6,800.0C062C682(4)2G5CA8,200.0C062C822(4)2G5CA10,000.0C062C103(4)2G5CA100 VOLT — C062 SIZE C0G5,600.0C062C562(4)1G5CA6,800.0C062C682(4)1G5CA8,200.0C062C822(4)1G5CA10,000.0C062C103(4)1G5CA12,000.0C062C123(4)1G5CA15,000.0C062C153(4)1G5CA18,000.0C062C183(4)1G5CA22,000.0C062C223(4)1G5CA200 VOLT — C512 SIZE C0G12,000.0C512C123(4)2G5CA15,000.0C512C153(4)2G5CA18,000.0C512C183(4)2G5CA22,000.0C512C223(4)2G5CA27,000.0C512C273(4)2G5CA33,000.0C512C333(4)2G5CA39,000.0C512C393(4)2G5CA47,000.0C512C473(4)2G5CA56,000.0C512C563(4)2G5CA68,000.0C512C683(4)2G5CA100 VOLT — C512 SIZE C0G27,000.0C512C273(4)1G5CA33,000.0C512C333(4)1G5CA39,000.0C512C393(4)1G5CA47,000.0C512C473(4)1G5CA56,000.0C512C563(4)1G5CA68,000.0C512C683(4)1G5CA82,000.0C512C823(4)1G5CA100,000.0C512C104(4)1G5CA200 VOLT — C522 SIZE C0G82,000.0C522C823(4)2G5CA100,000.0C522C104(4)2G5CA100 VOLT — C522 SIZE C0G120,000.0C522C124(4)1G5CA150,000.0C522C154(4)1G5CA180,000.0C522C184(4)1G5CA CAPACITANCE KEMETpF PART NUMBER200 VOLT — C052 SIZE C0G1.0C052C109(1)2G5CA1.5C052C159(1)2G5CA2.2C052C229(1)2G5CA2.7C052C279(1)2G5CA3.3C052C339(1)2G5CA3.9C052C399(1)2G5CA4.7C052C479(1)2G5CA5.6C052C569(1)2G5CA6.8C052C689(1)2G5CA8.2C052C829(1)2G5CA10.0C052C100(2)2G5CA12.0C052C120(2)2G5CA15.0C052C150(2)2G5CA18.0C052C180(2)2G5CA22.0C052C220(2)2G5CA27.0C052C270(3)2G5CA33.0C052C330(3)2G5CA39.0C052C390(3)2G5CA47.0C052C470(3)2G5CA56.0C052C560(4)2G5CA68.0C052C680(4)2G5CA82.0C052C820(4)2G5CA100.0C052C101(4)2G5CA120.0C052C121(4)2G5CA150.0C052C151(4)2G5CA180.0C052C181(4)2G5CA220.0C052C221(4)2G5CA270.0C052C271(4)2G5CA330.0C052C331(4)2G5CA390.0C052C391(4)2G5CA470.0C052C471(4)2G5CA560.0C052C561(4)2G5CA680.0C052C681(4)2G5CA820.0C052C821(4)2G5CA1,000.0C052C102(4)2G5CA1,200.0C052C122(4)2G5CA1,500.0C052C152(4)2G5CA1,800.0C052C182(4)2G5CA2,200.0C052C222(4)2G5CA2,700.0C052C272(4)2G5CA100 VOLT — C052 SIZE C0G390.0C052C391(4)1G5CA470.0C052C471(4)1G5CA560.0C052C561(4)1G5CA680.0C052C681(4)1G5CA820.0C052C821(4)1G5CA1,000.0C052C102(4)1G5CA1,200.0C052C122(4)1G5CA1,500.0C052C152(4)1G5CA1,800.0C052C182(4)1G5CA2,200.0C052C222(4)1G5CA2,700.0C052C272(4)1G5CA3,300.0C052C332(4)1G5CA3,900.0C052C392(4)1G5CA4,700.0C052C472(4)1G5CANOTE 1:Insert proper symbol for capacitance tolerance asfollows:(1) 1.0 pF to 8.2 pF: D— ±.5 pF(2) 10.0 pF to 22 pF: J— ±5%, K— ±10%(3) 27.0 pF to 47 pF: G— ±2%, J— ±5%, K— ±10%(4) 56.0 pF and up: F— ±1%,G— ±2%, J— ±5%, K— ±10%NOTE 1:Insert proper symbol for capacitance tolerance asfollows:(1) 1.0 pF to 8.2 pF: D— ±.5 pF(2) 10.0 pF to 22 pF: J— ±5%, K— ±10%(3) 27.0 pF to 47 pF: G— ±2%, J— ±5%, K— ±10%(4) 56.0 pF and up: F— ±1%,G— ±2%, J— ±5%, K— ±10%© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630025C e r a m i c M o l d e dA x i a l /R a d i a l - S t a n d a r dCERAMIC MOLDED/AXIAL – STANDARDSTABLE TEMPERATURE CHARACTERISTIC—X7RTOL.KEMET %PART NUMBER 100 VOLT — C202 SIZE 56,00010C202C563K1R5CA 68,00010C202C683K1R5CA 68,00020C202C683M1R5CA 82,00010C202C823K1R5CA 100,00010C202C104K1R5CA 100,00020C202C104M1R5CA 120,00010C202C124K1R5CA 150,00010C202C154K1R5CA 150,00020C202C154M1R5CA 180,00010C202C184K1R5CA 220,00010C202C224K1R5CA 220,00020C202C224M1R5CA 270,00010C202C274K1R5CA 330,00010C202C334K1R5CA 330,00020C202C334M1R5CA50 VOLT — C202 SIZE470,00010C202C474K5R5CA 470,00020C202C474M5R5CA 680,00010C202C684K5R5CA 680,00020C202C684M5R5CA 1,000,00010C202C105K5R5CA 1,000,00020C202C105M5R5CA100 VOLT — C222 SIZE 470,00010C222C474K1R5CA 470,00020C222C474M1R5CA 680,00010C222C684K1R5CA 680,00020C222C684M1R5CA 1,000,00010C222C105K1R5CA 1,000,00020C222C105M1R5CA50 VOLT — C222 SIZE2,200,00010C222C225K5R5CA 2,200,00020C222C225M5R5CA 3,300,00010C222C335K5R5CA 3,300,00020C222C335M5R5CACAPACI–TANCE pFTOL.KEMET %PART NUMBER 100 VOLT — C124 SIZE 5,60010C124C562K1R5CA 6,80010C124C682K1R5CA 6,80020C124C682M1R5CA 8,20010C124C822K1R5CA 10,00010C124C103K1R5CA 10,00020C124C103M1R5CA50 VOLT — C124 SIZE 12,00010C124C123K5R5CA 15,00010C124C153K5R5CA 15,00020C124C153M5R5CA 18,00010C124C183K5R5CA 22,00010C124C223K5R5CA 22,00020C124C223M5R5CA 27,00010C124C273K5R5CA 33,00010C124C333K5R5CA 33,00020C124C333M5R5CA 39,00010C124C393K5R5CA 47,00010C124C473K5R5CA 47,00020C124C473M5R5CA100 VOLT — C192 SIZE 12,00010C192C123K1R5CA 15,00010C192C153K1R5CA 15,00020C192C153M1R5CA 18,00010C192C183K1R5CA 22,00010C192C223K1R5CA 22,00020C192C223M1R5CA 27,00010C192C273K1R5CA 33,00010C192C333K1R5CA 33,00020C192C333M1R5CA 39,00010C192C393K1R5CA 47,00010C192C473K1R5CA 47,00020C192C473M1R5CA 56,00010C192C563K1R5CA 68,00010C192C683K1R5CA 68,00020C192C683M1R5CA 82,00010C192C823K1R5CA 100,00010C192C104K1R5CA 100,00020C192C104M1R5CA50 VOLT — C192 SIZE 56,00010C192C563K5R5CA 68,00010C192C683K5R5CA 68,00020C192C683M5R5CA 82,00010C192C823K5R5CA 100,00010C192C104K5R5CA 100,00020C192C104M5R5CA 120,00010C192C124K5R5CA 150,00010C192C154K5R5CA 150,00020C192C154M5R5CA 180,00010C192C184K5R5CA 220,00010C192C224K5R5CA 220,00020C192C224M5R5CA 270,00010C192C274K5R5CARATINGS & PART NUMBER REFERENCETOL.KEMET %PART NUMBER 100 VOLT — C114 SIZE 1010C114C100K1R5CA 1020C114C100M1R5CA 1210C114C120K1R5CA 1510C114C150K1R5CA 1520C114C150M1R5CA 1810C114C180K1R5CA 2220C114C220K1R5CA 2210C114C220M1R5CA 2710C114C270K1R5CA 3310C114C330K1R5CA 3320C114C330M1R5CA 3910C114C390K1R5CA 4710C114C470K1R5CA 4720C114C470M1R5CA 5610C114C560K1R5CA 6810C114C680K1R5CA 6820C114C680M1R5CA 8210C114C820K1R5CA 10010C114C101K1R5CA 10020C114C101M1R5CA 12010C114C121K1R5CA 15010C114C151K1R5CA 15020C114C151M1R5CA 18010C114C181K1R5CA 22010C114C221K1R5CA 22020C114C221M1R5CA 27010C114C271K1R5CA 33010C114C331K1R5CA 33020C114C331M1R5CA 39010C114C391K1R5CA 47010C114C471K1R5CA 47020C114C471M1R5CA 56010C114C561K1R5CA 68010C114C681K1R5CA 68020C114C681M1R5CA 82010C114C821K1R5CA 1,00010C114C102K1R5CA 1,00020C114C102M1R5CA 1,20010C114C122K1R5CA 1,50010C114C152K1R5CA 1,50020C114C152M1R5CA 1,80010C114C182K1R5CA 2,20010C114C222K1R5CA 2,20020C114C222M1R5CA 2,70010C114C272K1R5CA 3,30010C114C332K1R5CA 3,30020C114C332M1R5CA 3,90010C114C392K1R5CA 4,70010C114C472K1R5CA 4,70020C114C472M1R5CA50 VOLT — C114 SIZE 5,60010C114C562K5R5CA 6,80010C114C682K5R5CA 6,80020C114C682M5R5CA 8,20010C114C822K5R5CA 10,00010C114C103K5R5CA 10,00020C114C103M5R5CACAPACI–TANCE pFCAPACI–TANCE pF© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630026CERAMIC MOLDED/RADIAL – STANDARDSTABLE TEMPERATURE CHARACTERISTIC—X7RTOL.KEMET %PART NUMBER 100 VOLT — C062 SIZE 12,00010C062C123K1R5CA 15,00010C062C153K1R5CA 15,00020C062C153M1R5CA 18,00010C062C183K1R5CA 22,00010C062C223K1R5CA 22,00020C062C223M1R5CA 27,00010C062C273K1R5CA 33,00010C062C333K1R5CA 33,00020C062C333M1R5CA 39,00010C062C393K1R5CA 47,00010C062C473K1R5CA 47,00020C062C473M1R5CA 56,00010C062C563K1R5CA 68,00010C062C683K1R5CA 68,00020C062C683M1R5CA 82,00010C062C823K1R5CA 100,00010C062C104K1R5CA 100,00020C062C104M1R5CA50 VOLT — C062 SIZE 120,00010C062C124K5R5CA 150,00010C062C154K5R5CA 150,00020C062C154M5R5CA 180,00010C062C184K5R5CA 220,00010C062C224K5R5CA 220,00020C062C224M5R5CA 270,00010C062C274K5R5CA 330,00010C062C334K5R5CA 330,00020C062C334M5R5CA 390,00010C062C394K5R5CA 470,00010C062C474K5R5CA 470,00020C062C474M5R5CA 560,00010C062C564K5R5CA 680,00010C062C684K5R5CA 680,00020C062C684M5R5CA 820,00010C062C824K5R5CA 1,000,00010C062C105K5R5CA 1,000,00020C062C105M5R5CA50 VOLT — C512 SIZE1,000,00010C512C105K5X5CA 1,000,00020C512C105M5X5CA 1,500,00010C512C155K5X5CA 1,500,00020C512C155M5X5CA 2,000,00010C512C205K5X5CA 2,000,00020C512C205M5X5CA 2,200,00010C512C225K5X5CA 2,200,00020C512C225M5X5CA100 VOLT — C522 SIZE1,000,00010C522C105K1X5CA 1,000,00020C522C105M1X5CA50 VOLT — C522 SIZE2,700,00010C522C275K5X5CA 2,700,00020 C522C275M5X5CA 3,300,00010C522C335K5X5CA 3,300,00020C522C335M5X5CACAPACI–TANCE pFTOL.KEMET %PART NUMBER 100 VOLT — C052 SIZE 1,20010C052C122K1R5CA 1,50010C052C152K1R5CA 1,50020C052C152M1R5CA 1,80010C052C182K1R5CA 2,20010C052C222K1R5CA 2,20020C052C222M1R5CA 2,70010C052C272K1R5CA 3,30010C052C332K1R5CA 3,30020C052C332M1R5CA 3,90010C052C392K1R5CA 4,70010C052C472K1R5CA 4,70020C052C472M1R5CA 5,60010C052C562K1R5CA 6,80010C052C682K1R5CA 6,80020C052C682M1R5CA 8,20010C052C822K1R5CA 10,00010C052C103K1R5CA 10,00020C052C103M1R5CA50 VOLT — C052 SIZE 12,00010C052C123K5R5CA 15,00010C052C153K5R5CA 15,00020C052C153M5R5CA 18,00010C052C183K5R5CA 22,00010C052C223K5R5CA 22,00020C052C223M5R5CA 27,00010C052C273K5R5CA 33,00010C052C333K5R5CA 33,00020C052C333M5R5CA 39,00010C052C393K5R5CA 47,00010C052C473K5R5CA 47,00020C052C473M5R5CA 56,00010C052C563K5R5CA 68,00010C052C683K5R5CA 68,00020C052C683M5R5CA 82,00010C052C823K5R5CA 100,00010C052C104K5R5CA 100,00020C052C104M5R5CA200 VOLT — C062 SIZE 1,20010C062C122K2R5CA 1,50010C062C152K2R5CA 1,50020C062C152M2R5CA 1,80010C062C182K2R5CA 2,20010C062C222K2R5CA 2,20020C062C222M2R5CA 2,70010C062C272K2R5CA 3,30010C062C332K2R5CA 3,30020C062C332M2R5CA 3,90010C062C392K2R5CA 4,70010C062C472K2R5CA 4,70020C062C472M2R5CA 5,60010C062C562K2R5CA 6,80010C062C682K2R5CA 6,80020C062C682M2R5CA 8,20010C062C822K2R5CA 10,00010C062C103K2R5CA 10,00020C062C103M2R5CARATINGS & PART NUMBER REFERENCETOL.KEMET %PART NUMBER 200 VOLT — C052 SIZE 1010C052C100K2R5CA 1020C052C100M2R5CA 1210C052C120K2R5CA 1510C052C150K2R5CA 1520C052C150M2R5CA 1810C052C180K2R5CA 2210C052C220K2R5CA 2220C052C220M2R5CA 2710C052C270K2R5CA 3310C052C330K2R5CA 3320C052C330M2R5CA 3910C052C390K2R5CA 4710C052C470K2R5CA 4720C052C470M2R5CA 5610C052C560K2R5CA 6810C052C680K2R5CA 6820C052C680M2R5CA 8210C052C820K2R5CA 10010C052C101K2R5CA 10020C052C101M2R5CA 12010C052C121K2R5CA 15010C052C151K2R5CA 15020C052C151M2R5CA 18010C052C181K2R5CA 22010C052C221K2R5CA 22020C052C221M2R5CA 27010C052C271K2R5CA 33010C052C331K2R5CA 33020C052C331M2R5CA 39010C052C391K2R5CA 47010C052C471K2R5CA 47020C052C471M2R5CA 56010C052C561K2R5CA 68010C052C681K2R5CA 68020C052C681M2R5CA 82010C052C821K2R5CA 1,00010C052C102K2R5CA 1,00020C052C102M2R5CACAPACI–TANCE pFCAPACI–TANCE pFCERAMIC LEADEDPACKAGING INFORMATION© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630039CERAMIC LEADEDPACKAGING INFORMATION© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630040Ceramic Radial Tape and Reel Dimensions in Millimeters & (Inches)Ceramic RadialLead Tape and Reel Packaging(.20") center-to-center.C317**C322**C323**C333**C315*C320*CK05**CKR05**C052**C056**C066**CK06**CKR06**C062**C330**C340**Sprocket Hole Diameter Sprocket Hole Pitch Component Pitch Lead Spacing (1)Sprocket Hole Center to Lead Center (1)Sprocket Hole Center to Component Center Height to Seating Plane (straight leads) (2)Component Height Above Tape CenterDimensionSymbol Nominal mm (inch)Tolerance mm (inch)Dimension Symbol Nominal mm (inch)Tolerancemm (inch)Height to Seating Plane (formed leads) (2)Component Alignment Lead Protrusion Composite Tape ThicknessOverall Tape and Lead Thickness Carrier Tape Width Hold-Down Tape WidthHold-Down Tape LocationDo P0P F P1P2H H1± 0.2 (.008)± 0.3 (.012)± 0.3 (.012)+0.6 -0.2(+.024 -.008)± 0.7 (.028)± 1.3 (.051)7301 7303±0.5 (.020) MinimumMaximum7301 730316.0 (.630) 18.0 (.709)4.0 (.157)1.0 (.039)0.7 (.051)1.5 (.059)18.0 (.709)5.0 (.197)3.0 (.118)H 0∆h L1t T W W0W27301 7303±0.5 (.020) Minimum ±0.2 (.008)Maximum ±0.2 (.008)Maximum +1.0 - 0.5(+.039 -.020)Minimum Maximum(1) Measured at the egress from the carrier tape, on the component side.(2) Determined by a 4 digit suffix placed at the end of the part number, as follows: 7301 = 7303 = 4.0 (.157)12.7 (.500)12.7 (.500)5.08 2.54(.20) (.10)3.81 5.08(.150) (.200)6.35 (.250)7301 730316.0 (.630) 18.0 (.709)32.2 (1.27)Recommended for parts with formed leads.Recommended for parts with straight leads.Example: C322C104K5R5CA7301Example: C320C104K5R5CA7303(Note: Non-standard lead lengthsavailable in bulk only.)# See page 15 for exact lead configuration for Series.© KEMET Electronics Corporation, P .O. Box 5928, Greenville, S.C. 29606, (864) 963-630041CERAMIC LEADEDPACKAGING INFORMATIONT a p e a n d R e e l P a c k a g i n g(2) Quantity varies. For further details, please consult the factory.。