CJ World Messenger Manual_china
PilotPioneerV9.6-使用说明(数据采集)
,.用户说明书（数据采集）User manul of Data collection文档历史目录1 系统说明 (1)1.1 Pilot Pioneer简介 (1)1.2 操作系统 (1)1.3 最低配置 (1)1.4 建议配置 (1)2 软件主界面 (3)2.1 导航栏 (3)2.2 菜单栏 (5)2.2.1 【File】菜单 (5)2.2.2 【View】菜单 (6)2.2.3 【Configuration】菜单 (6)2.2.4 【Record】菜单 (8)2.2.5 【Replay】菜单 (9)2.2.6 【Workspace】菜单 (10)2.2.7 【Interface】菜单 (10)2.2.8 【Tools】菜单 (10)2.2.9 【Report】菜单 (11)2.2.10 【Analysis】菜单 (12)2.2.11 【Windows】菜单 (12)2.2.12 【Help】菜单 (13)2.3 工具栏 (13)2.4 工作区 (15)2.5 状态栏 (15)3 工程管理 (16)3.1 新建工程 (16)3.2 打开工程 (18)3.3 打开最近工程 (19)3.4 保存工程 (19)3.5 另存为工程 (19)3.6 关闭工程 (19)4 场景管理 (21)5 设备配置 (23)5.1 未配置设备 (23)5.2 自动检测 (24)5.3 手动配置 (25)5.3.1 Handset设备配置 (27)5.3.2 GPS设备配置 (29)5.3.3 Scanner设备配置 (30)6 测试模版与测试计划 (31)6.1 Handset测试模板 (31)6.2 测试计划 (32)6.2.1 测试计划管理 (32)6.2.1.1 轮换业务 (35)6.2.1.2 并发业务 (35)6.2.2 测试计划导入 (35)6.2.3 测试计划导出 (36)6.2.4 删除测试计划 (37)6.2.5 测试计划保存至模板 (37)7 测试业务 (39)7.1 Handset测试业务 (39)7.1.1 Call (40)7.1.2 MOS (42)7.1.2.1 关于POLQA的说明 (46)7.1.3 FTP Download (50)7.1.4 FTP Upload (54)7.1.5 HTTP Download (59)7.1.6 HTTP Page (63)7.1.7 HTTP Upload (66)7.1.8 Video Streaming (70)7.1.9 WAP Page (74)7.1.10 WAP Download (77)7.1.11 SMS (80)7.1.12 MMS (81)7.1.13 Attach (85)7.1.14 PDP (87)7.1.16 Receive Email (91)7.1.17 Send Email (94)7.1.18 PPP Dial (97)7.1.19 MTC Test (99)7.1.20 Idle Test (100)7.1.21 MOS Self-Check (101)7.1.22 MOS Self-Loop (103)7.1.23 Video Telephony (104)7.1.24 iPerf (106)7.1.25 Multi FTP Download (109)7.1.26 Multi FTP Upload (114)7.1.27 LTE Power (118)7.1.28 Speed T est (119)7.1.29 Video Play (122)7.1.30 DNS Lookup (126)7.1.31 Facebook (129)7.1.32 VoIP (132)7.1.33 WeiBo (136)7.1.34 Trace Route (139)7.1.35 PBM (142)7.1.36 WeCall (145)7.1.38 App YiXin (149)7.1.39 Manual MOS (151)7.1.40 Auto Test (154)7.2 Scanner测试业务 (156)7.2.1 Pilot (157)7.2.2 CW (158)7.2.3 Spectrum (159)7.2.4 Color Code (160)7.2.5 Blind (162)7.2.6 EPS (163)8 数据采集 (166)8.1 连接状态 (166)8.2 记录状态 (167)8.2.1 记录特殊设置 (168)8.2.2 数据附加信息 (174)8.2.3 插入文件标记 (174)8.2.4 路测数据切换 (175)8.3 强制命令 (175)8.4 AT指令 (177)9 测试数据管理 (179)9.1 测试数据导入 (179)9.1.2 高级导入 (180)9.1.3 按文件夹导入 (181)9.2 测试数据导出 (181)9.2.1 以Python脚本导出数据 (186)9.3 测试数据删除 (187)9.4 测试数据合并/分割 (188)9.4.1 测试数据合并 (189)9.4.2 测试数据分割 (190)9.4.3 数据轨迹校正 (192)9.5 测试数据重解码 (192)9.6 书签 (193)9.7 关键字查询 (194)9.8 过滤器管理 (197)9.9 生成过滤数据 (204)10 数据回放 (206)10.1 复制测试数据 (207)10.2 数据关联 (208)10.3 未插狗回放 (209)11 室内测试 (211)11.1 导入楼层 (211)11.2 添加楼层 (211)11.3 更新 (212)12 基站管理 (213)12.1 基站数据库导入 (213)12.1.1 自动导入 (213)12.1.2 手动导入 (214)12.2 基站数据库管理 (216)12.2.1 小区编辑 (218)12.2.2 增加基站 (219)12.3 基站数据库导出 (220)12.4 基站数据库分析 (220)13 Map窗口 (223)13.1 窗口介绍 (223)13.1.1 Map工具栏 (223)13.1.2 Map状态栏 (227)13.1.3 窗口右键功能 (227)13.1.4 图例窗口 (229)13.2 Map窗口信息显示 (232)13.2.1 测试数据显示 (233)13.2.2 基站数据显示 (234)13.2.3 地图数据显示 (235)13.2.4 谷歌地图类显示 (236)13.2.5 事件显示 (238)13.3 小区设置 (241)13.3.1 小区显示 (241)13.3.2 标签设置 (244)13.3.3 小区连线 (246)13.3.4 小区检查 (249)13.4 信息设置 (251)13.4.1 参数设置 (251)13.4.2 小区设置 (254)13.5 室内打点 (255)13.6 拉线图分析 (256)14 Message窗口 (260)14.1 窗口介绍 (260)14.2 Message窗口功能 (261)14.2.1 查找 (262)14.2.2 过滤 (263)14.2.3 书签 (264)14.3 Message窗口右键功能 (265)14.4 Message Details窗口 (266)15 Event List窗口 (268)15.1 窗口介绍 (268)15.2 Event List窗口功能 (269)15.2.2 过滤 (270)15.2.3 异常事件 (271)15.3 Event List窗口右键功能 (271)15.4 Event Details窗口 (272)16 Line Chart窗口 (273)16.1 Line Chart窗口操作 (274)16.1.1 新建Line Chart窗口 (274)16.1.2 打开Line Chart窗口 (274)16.2 Line Chart窗口功能 (275)16.2.1 Line Chart属性设置 (276)16.2.2 Line Chart 参数设置 (278)17 Bar窗口 (280)17.1 新建BarChart 窗口 (281)17.1.1 参数编辑 (282)17.2 窗口显示 (282)18 Status窗口 (285)18.1 新建Status窗口 (286)18.1.1 编辑列 (288)18.1.2 编辑单元格 (289)18.2 窗口显示 (290)19 其他窗口 (292)19.1.1 窗口介绍 (292)19.1.2 事件计数器设置 (294)19.1.3 事件计数器复位 (296)19.2 MOS (297)19.2.1 MOS拨打固定端 (297)19.2.2 MOS Settings (298)19.2.3 MOS (299)19.3 Video (301)19.4 Data (303)19.5 GPS (304)19.6 Statistics (305)19.7 Adjust Image (306)20 软件设置 (311)20.1 参数设置 (311)20.2 消息设置 (313)20.3 事件设置 (314)20.4 导航栏参数管理 (316)20.5 自定义参数管理 (317)20.6 自定义事件管理 (320)20.7 TCP/IP设置 (325)21 What’s New (327)21.2 新功能 (327)21.3 新设备 (332)22 免责声明 (336)1系统说明1.1Pilot Pioneer简介Pilot Pioneer是集成了多个网络进行同步测试的新一代无线网络测试及分析软件，结合长期无线网络优化的经验和最新的研究成果，基于PC和Windows 7/XP的网络优化评估，具备完善的GSM、CDMA、EVDO、WCDMA、TD-SCDMA、LTE网络测试以及Scanner 测试功能。
在商品交易会上问候商业伙伴英文对话
在商品交易会上问候商业伙伴英文对话一、引言在国际商业交流中，与商业伙伴的英文对话是非常重要的一部分。
在商品交易会上，作为一名职业人士，能够用流利的英文与商业伙伴进行问候和交流，不仅能提升个人形象，还有助于建立良好的合作关系。
本文将从简单的问候语开始，逐步深入探讨商业伙伴英文对话的技巧和要点，希望能为您的国际商务交流提供一些有价值的帮助。
二、初级问候语1. Hello, how are you?2. Good morning/afternoon/evening, nice to meet you.3. Hi, I’m [Your Name]. What’s your name?以上是一些基本的初级问候语，能够在商品交易会上与商业伙伴进行简单而礼貌的交流。
当然，除了问候语之外，礼貌的微笑和自信的姿态也是非常重要的，它们能够传递出积极的沟通态度和良好的合作意愿。
三、进阶对话技巧1. 如何介绍自己和公司```- Hi, I’m [Your Name] from [Your Company], a leading providerof [Your Product or Service].- Nice to meet you. I’m [Your Name], the CEO/manager/sales director of [Your Company].- Hello, I represent [Your Company], we specialize in [Your Product or Service].```2. 如何询问和交流```- Can you tell me more about your company and the products you offer?- I’m interested in exploring potential business opportunities with your company. Do you have any specific needs or requirements?- What are your thoughts on the current market trends and future developments?```通过以上进阶对话技巧，能够更加深入地了解商业伙伴的情况和需求，为未来的合作提供更具针对性的建议和方案。
罗技G系列外设宏命令编程参考文档
G-series Lua API 参考文档V8.50预览与概述手册目录手册目录 (2)内容预览 (3)参考文档 (4)标准 Lua 5.1 库 (40)附录A (41)G-series Lua API 参考手册是一套使用 Lua 脚本编程语言描述并且为 G-series 系列游戏键盘提供高级脚本功能。
该文档是在假设您已初步掌握 Lua 脚本编程语言使用方法的前提下进行的。
如果您想了解更多信息请访问 。
每项 G 系列的配置文件都有一个默认的 Lua 脚本与其绑定，并且您可以根据您的喜好随意编辑或者自定义。
该脚本借助并使用一个名为OnEvent 的事件句柄。
用户可以通过检查此句柄中触发的各种事件以执行用户所希望的动作。
方法列表OnEvent (5)GetMKeyState (7)SetMKeyState (8)Sleep (9)OutputLogMessage (10)GetRunningTime (11)GetDate (12)ClearLog (13)PressKey (14)ReleaseKey (15)PressAndReleaseKey (16)IsModifierPressed (17)PressMouseButton (18)ReleaseMouseButton (19)PressAndReleaseMouseButton (20)IsMouseButtonPressed (21)MoveMouseTo (22)MoveMouseWheel (23)MoveMouseRelative (24)MoveMouseToVirtual (25)GetMousePosition (26)OutputLCDMessage (27)ClearLCD (28)PlayMacro (29)AbortMacro (30)IsKeyLockOn (31)SetBacklightColor (32)OutputDebugMessage (33)SetMouseDPITable (34)SetMouseDPITableIndex (35)EnablePrimaryMouseButtonEvents (36)G13 Programming (37)OnEventOnEvent() 方法为脚本提供了一系列事件句柄以方便用户对触发的事件进行操作，您可以使用以下代码实现此方法。
英语材料——渣打邮件门
一个在瑞信银行工作的白领给所有的朋友群发邮件，怒斥丈夫和小三背叛自己的各种行为；丈夫和小三分别回信，让此女停止纠缠速速离婚……本来是一桩常见的斗小三狗血事件，但是重点在于，三位主角均是金融业高级白领，来往信件皆为英文，各种优雅的语法被用作三角恋斗法，让网友大开眼界，将此称为“瑞信女斗小三”事件，也叫渣打邮件门。
以下为渣打邮件门全文,首先是女主角给所有人群发的：Dear friends,After 13 years and 2 beautiful children together, Yale and I haveparted our ways. Yale moved out last week.接下来是女主角给小三写的：Dear Diane/Tao Dan Yang,Over the past couple of years, you knew everything about my family.You knew when my kids had their soccer tournaments, you knew when they had their swimming practices. You even knew their baby nicknames. On December 18th, 2009, on a noon flight, I took my children to the U.S. for Christmas vacation. On the very same day, December 18th, 2009, on an afternoon flight, you and Yale took off for the beaches of Phuket and shopping streets of Bangkok for Christmas vacation. Diane, as a fellow woman, I often wondered if the level of ecstasy this vacation had brought you equates to the level of devastation this vacation had brought to my children and me. Diane, I often asked myself what was it like for you to sleep in the arms of another woman's husband, other children's father? I wondered if you ever thought about us, the children and the wife, that we are made of flesh and blood, that we have feelings, that we could get hurt, very hurt, devastatingly hurt.I pondered if you knew you were destroying a family, if you knew your joy would bring endless tears to us.We went to Beijing last week for Chinese New Year. Your clothes were in our Beijing home. My son screamed:" Mommy, don't touch those, they are disgusting! Set them on fire, burn them to hell. They are the devil's cloth!" My children are hurt. My daughter, 9 years old, now says "Mommy, I don't ever want to get married." My s on, 8 years old, says "Diane is our Voldemort!" The psychological damage this affair has done to my children is catastrophic. They are forever emotionally damaged. With this, I announce you the winner.How do I feel, Diane? This affair is like 10 thousand knives stabbing and chopping my heart all at once. This affair has left me in so much pain that I don't know how to heal myself. This affair has taught me tear supply can actually be infinite. This affair has crushed me, leaving me a corpse walking around with no heart. I don't know how to deal with this kind of pain. I don't know how to move on. But I have children. I must move on.Diane, I pray to God that you will never have to experience this kind of betrayal and hurt. I wish you and Yale a happy life together because, after all, we are all women and we all deserve to be happy.With sincere regards,Lily渣打邮件门小三的精彩回复：Dear Lily,I understand that you are going through a difficult time in your personal life, and I sincerely hope that you will find a way to deal with it that is the best for you and your children.I do understand how you feel. I also understand, however, that a marriage can only break apart from the inside. I do not appreciate your attempt to smear my reputation and paint me as the home wrecker. You know as well as Yale does that your marriage fell apart long before Yale and I even met. Whether or not I am in Yale's life has nothing to do with the eventual outcome of your marriage. I am sure you understand this as well, but you nonetheless sought to burn me on the cross as the scapegoat for your failed marriage, which I do not believe is a mature thing to do.Your description of the emotional damage your children have suffered is disturbing indeed.I cannot help but wondering what you have been telling them. I would think that a mother's first and foremost priority is to protect her children from any emotional damage, rather than using them as bargaining chips or as props to win public sympathy. Yale is the children's father and will always be. I am sure he will always love them and be the best father he can be to them. Wouldn't it make more sense, for the sake of the children's wellbeing, to emphasize to them that both their parents will always love them even though one parent will not be living with them all the time? I do not see what benefit there could possibly be to teach the children to hate their own father.You asked me how it was like to sleep in Yale's arms. I also wanted to ask you, Lily, why would you want to hang on to someone who clearly does not want to be with you at all? Lily, you are intelligent, highly-educated and you have a high-paying and well-respected job. So why did you spend so much time and energy trying to force someone who does not care about you to stay with you? As a fellow woman I want to ask you this, don't you think you deserve better? If there's anything that is worse than sleeping in the arms of another woman's husband, it is sleeping in the arms of someone who resents you, cannot stand you and wants to run away from you whenever he gets a chance. So Lily, why would you want to put yourself in that situation? Once again, don't you think you deserve better?I sincerely hope that the pain you are currently feeling will subside soon and you can turna new leaf in your life. Please remember, you can lose a job, you can lose a spouse, but you should never lose yourself. And please, do not vent your negative feelings on your children. They are innocent. Please always keep in mind their best interests rather than your own. You deserve true happiness, and I hope that you will find it soon.Best regards,Diane。
方正 U300 U400 说明书
连接扫描仪到您的计算机上 .............................................................................4 安装扫描驱动程序 .............................................................................................5
方正扫描仪U300/U400
安装使用手册
感谢您购买本产品。有了这台U300/U400扫描仪，您可轻轻松松的扫描 文件或是照片，并储存在计算机上以供您随时取出使用。
主要特点：
高分辨率及高品质：提供分辨率高达2400dpi，精确再现图象细节。它 可采集到更精确的明调和暗调层次，这样图像的色彩分布会更加均匀和 细腻。
高扫描速度：扫描仪预扫时间只需8秒，扫描速度极快。 透扫器（仅适用在U400）：独特设计的多尺寸组合片夹允许您扫描35mm 正负片、幻灯片、120/220底片及其它透明片等等，最大的扫描范围达 到60mm×170mm。 安全可靠：独特的自动琐设计，让您的扫描仪更加安全。
系统需求：
Pentium或更高级的计算机设备，配备USB2.0接口、光驱、100MB以上 的硬盘空间、128MB以上的内存，SVGA或更高级的图形显示卡。 微软Windows 98、me、2000、XP。
偏好窗口 ........................................................................................................................ 19 颜色校正的高级控制窗口 ....................................................................................... 21 色调分布图 ................................................................................................................... 22 色彩浓度 ........................................................................................................................ 23 Gamma ............................................................................................................................ 24 扫描小秘诀 .......................................................................................................25
福建外贸公司企业邮箱
SALES@
wyhong829@
junnong@
service@
zhaiguo21@
zhaiguo21@
zhaiguo@
zheng.a2005@
pufa.888@
ldb2003168@
kelibo889@
icdz@
pokic@
luyuankj@
szjkdz007@
fanxuefeng1982@
qingyangdz@
szwinsome@
aeedy824@
yxdz899@
jnitfy@
Rubine.xq@
ouben.elect@
sales1@
crafts@
Deng@
china8@
400ed3fb1c65cd14@
michelle@
info@
webmaster@
info@
service@
info@
advertise@
looskys@
szxtdz@
hxwdz@
duguqiubaifenyo@
sxcdzkj@
fo-ly@
dgliang-xin@
rydz1@
info@
contact@
chipsetmail@yahoo.co.in
bhadra999@
keralam@
sales_delhi@
mpholidaytours@
luna826250@
fannye@
fannyefen@ ห้องสมุดไป่ตู้
yourname@
3GPP TS 36.331 V13.2.0 (2016-06)
3GPP TS 36.331 V13.2.0 (2016-06)Technical Specification3rd Generation Partnership Project;Technical Specification Group Radio Access Network;Evolved Universal Terrestrial Radio Access (E-UTRA);Radio Resource Control (RRC);Protocol specification(Release 13)The present document has been developed within the 3rd Generation Partnership Project (3GPP TM) and may be further elaborated for the purposes of 3GPP. The present document has not been subject to any approval process by the 3GPP Organizational Partners and shall not be implemented.This Specification is provided for future development work within 3GPP only. The Organizational Partners accept no liability for any use of this Specification. Specifications and reports for implementation of the 3GPP TM system should be obtained via the 3GPP Organizational Partners' Publications Offices.KeywordsUMTS, radio3GPPPostal address3GPP support office address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16InternetCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© 2016, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TSDSI, TTA, TTC).All rights reserved.UMTS™ is a Trade Mark of ETSI registered for the benefit of its members3GPP™ is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational PartnersLTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners GSM® and the GSM logo are registered and owned by the GSM AssociationBluetooth® is a Trade Mark of the Bluetooth SIG registered for the benefit of its membersContentsForeword (18)1Scope (19)2References (19)3Definitions, symbols and abbreviations (22)3.1Definitions (22)3.2Abbreviations (24)4General (27)4.1Introduction (27)4.2Architecture (28)4.2.1UE states and state transitions including inter RAT (28)4.2.2Signalling radio bearers (29)4.3Services (30)4.3.1Services provided to upper layers (30)4.3.2Services expected from lower layers (30)4.4Functions (30)5Procedures (32)5.1General (32)5.1.1Introduction (32)5.1.2General requirements (32)5.2System information (33)5.2.1Introduction (33)5.2.1.1General (33)5.2.1.2Scheduling (34)5.2.1.2a Scheduling for NB-IoT (34)5.2.1.3System information validity and notification of changes (35)5.2.1.4Indication of ETWS notification (36)5.2.1.5Indication of CMAS notification (37)5.2.1.6Notification of EAB parameters change (37)5.2.1.7Access Barring parameters change in NB-IoT (37)5.2.2System information acquisition (38)5.2.2.1General (38)5.2.2.2Initiation (38)5.2.2.3System information required by the UE (38)5.2.2.4System information acquisition by the UE (39)5.2.2.5Essential system information missing (42)5.2.2.6Actions upon reception of the MasterInformationBlock message (42)5.2.2.7Actions upon reception of the SystemInformationBlockType1 message (42)5.2.2.8Actions upon reception of SystemInformation messages (44)5.2.2.9Actions upon reception of SystemInformationBlockType2 (44)5.2.2.10Actions upon reception of SystemInformationBlockType3 (45)5.2.2.11Actions upon reception of SystemInformationBlockType4 (45)5.2.2.12Actions upon reception of SystemInformationBlockType5 (45)5.2.2.13Actions upon reception of SystemInformationBlockType6 (45)5.2.2.14Actions upon reception of SystemInformationBlockType7 (45)5.2.2.15Actions upon reception of SystemInformationBlockType8 (45)5.2.2.16Actions upon reception of SystemInformationBlockType9 (46)5.2.2.17Actions upon reception of SystemInformationBlockType10 (46)5.2.2.18Actions upon reception of SystemInformationBlockType11 (46)5.2.2.19Actions upon reception of SystemInformationBlockType12 (47)5.2.2.20Actions upon reception of SystemInformationBlockType13 (48)5.2.2.21Actions upon reception of SystemInformationBlockType14 (48)5.2.2.22Actions upon reception of SystemInformationBlockType15 (48)5.2.2.23Actions upon reception of SystemInformationBlockType16 (48)5.2.2.24Actions upon reception of SystemInformationBlockType17 (48)5.2.2.25Actions upon reception of SystemInformationBlockType18 (48)5.2.2.26Actions upon reception of SystemInformationBlockType19 (49)5.2.3Acquisition of an SI message (49)5.2.3a Acquisition of an SI message by BL UE or UE in CE or a NB-IoT UE (50)5.3Connection control (50)5.3.1Introduction (50)5.3.1.1RRC connection control (50)5.3.1.2Security (52)5.3.1.2a RN security (53)5.3.1.3Connected mode mobility (53)5.3.1.4Connection control in NB-IoT (54)5.3.2Paging (55)5.3.2.1General (55)5.3.2.2Initiation (55)5.3.2.3Reception of the Paging message by the UE (55)5.3.3RRC connection establishment (56)5.3.3.1General (56)5.3.3.1a Conditions for establishing RRC Connection for sidelink communication/ discovery (58)5.3.3.2Initiation (59)5.3.3.3Actions related to transmission of RRCConnectionRequest message (63)5.3.3.3a Actions related to transmission of RRCConnectionResumeRequest message (64)5.3.3.4Reception of the RRCConnectionSetup by the UE (64)5.3.3.4a Reception of the RRCConnectionResume by the UE (66)5.3.3.5Cell re-selection while T300, T302, T303, T305, T306, or T308 is running (68)5.3.3.6T300 expiry (68)5.3.3.7T302, T303, T305, T306, or T308 expiry or stop (69)5.3.3.8Reception of the RRCConnectionReject by the UE (70)5.3.3.9Abortion of RRC connection establishment (71)5.3.3.10Handling of SSAC related parameters (71)5.3.3.11Access barring check (72)5.3.3.12EAB check (73)5.3.3.13Access barring check for ACDC (73)5.3.3.14Access Barring check for NB-IoT (74)5.3.4Initial security activation (75)5.3.4.1General (75)5.3.4.2Initiation (76)5.3.4.3Reception of the SecurityModeCommand by the UE (76)5.3.5RRC connection reconfiguration (77)5.3.5.1General (77)5.3.5.2Initiation (77)5.3.5.3Reception of an RRCConnectionReconfiguration not including the mobilityControlInfo by theUE (77)5.3.5.4Reception of an RRCConnectionReconfiguration including the mobilityControlInfo by the UE(handover) (79)5.3.5.5Reconfiguration failure (83)5.3.5.6T304 expiry (handover failure) (83)5.3.5.7Void (84)5.3.5.7a T307 expiry (SCG change failure) (84)5.3.5.8Radio Configuration involving full configuration option (84)5.3.6Counter check (86)5.3.6.1General (86)5.3.6.2Initiation (86)5.3.6.3Reception of the CounterCheck message by the UE (86)5.3.7RRC connection re-establishment (87)5.3.7.1General (87)5.3.7.2Initiation (87)5.3.7.3Actions following cell selection while T311 is running (88)5.3.7.4Actions related to transmission of RRCConnectionReestablishmentRequest message (89)5.3.7.5Reception of the RRCConnectionReestablishment by the UE (89)5.3.7.6T311 expiry (91)5.3.7.7T301 expiry or selected cell no longer suitable (91)5.3.7.8Reception of RRCConnectionReestablishmentReject by the UE (91)5.3.8RRC connection release (92)5.3.8.1General (92)5.3.8.2Initiation (92)5.3.8.3Reception of the RRCConnectionRelease by the UE (92)5.3.8.4T320 expiry (93)5.3.9RRC connection release requested by upper layers (93)5.3.9.1General (93)5.3.9.2Initiation (93)5.3.10Radio resource configuration (93)5.3.10.0General (93)5.3.10.1SRB addition/ modification (94)5.3.10.2DRB release (95)5.3.10.3DRB addition/ modification (95)5.3.10.3a1DC specific DRB addition or reconfiguration (96)5.3.10.3a2LWA specific DRB addition or reconfiguration (98)5.3.10.3a3LWIP specific DRB addition or reconfiguration (98)5.3.10.3a SCell release (99)5.3.10.3b SCell addition/ modification (99)5.3.10.3c PSCell addition or modification (99)5.3.10.4MAC main reconfiguration (99)5.3.10.5Semi-persistent scheduling reconfiguration (100)5.3.10.6Physical channel reconfiguration (100)5.3.10.7Radio Link Failure Timers and Constants reconfiguration (101)5.3.10.8Time domain measurement resource restriction for serving cell (101)5.3.10.9Other configuration (102)5.3.10.10SCG reconfiguration (103)5.3.10.11SCG dedicated resource configuration (104)5.3.10.12Reconfiguration SCG or split DRB by drb-ToAddModList (105)5.3.10.13Neighbour cell information reconfiguration (105)5.3.10.14Void (105)5.3.10.15Sidelink dedicated configuration (105)5.3.10.16T370 expiry (106)5.3.11Radio link failure related actions (107)5.3.11.1Detection of physical layer problems in RRC_CONNECTED (107)5.3.11.2Recovery of physical layer problems (107)5.3.11.3Detection of radio link failure (107)5.3.12UE actions upon leaving RRC_CONNECTED (109)5.3.13UE actions upon PUCCH/ SRS release request (110)5.3.14Proximity indication (110)5.3.14.1General (110)5.3.14.2Initiation (111)5.3.14.3Actions related to transmission of ProximityIndication message (111)5.3.15Void (111)5.4Inter-RAT mobility (111)5.4.1Introduction (111)5.4.2Handover to E-UTRA (112)5.4.2.1General (112)5.4.2.2Initiation (112)5.4.2.3Reception of the RRCConnectionReconfiguration by the UE (112)5.4.2.4Reconfiguration failure (114)5.4.2.5T304 expiry (handover to E-UTRA failure) (114)5.4.3Mobility from E-UTRA (114)5.4.3.1General (114)5.4.3.2Initiation (115)5.4.3.3Reception of the MobilityFromEUTRACommand by the UE (115)5.4.3.4Successful completion of the mobility from E-UTRA (116)5.4.3.5Mobility from E-UTRA failure (117)5.4.4Handover from E-UTRA preparation request (CDMA2000) (117)5.4.4.1General (117)5.4.4.2Initiation (118)5.4.4.3Reception of the HandoverFromEUTRAPreparationRequest by the UE (118)5.4.5UL handover preparation transfer (CDMA2000) (118)5.4.5.1General (118)5.4.5.2Initiation (118)5.4.5.3Actions related to transmission of the ULHandoverPreparationTransfer message (119)5.4.5.4Failure to deliver the ULHandoverPreparationTransfer message (119)5.4.6Inter-RAT cell change order to E-UTRAN (119)5.4.6.1General (119)5.4.6.2Initiation (119)5.4.6.3UE fails to complete an inter-RAT cell change order (119)5.5Measurements (120)5.5.1Introduction (120)5.5.2Measurement configuration (121)5.5.2.1General (121)5.5.2.2Measurement identity removal (122)5.5.2.2a Measurement identity autonomous removal (122)5.5.2.3Measurement identity addition/ modification (123)5.5.2.4Measurement object removal (124)5.5.2.5Measurement object addition/ modification (124)5.5.2.6Reporting configuration removal (126)5.5.2.7Reporting configuration addition/ modification (127)5.5.2.8Quantity configuration (127)5.5.2.9Measurement gap configuration (127)5.5.2.10Discovery signals measurement timing configuration (128)5.5.2.11RSSI measurement timing configuration (128)5.5.3Performing measurements (128)5.5.3.1General (128)5.5.3.2Layer 3 filtering (131)5.5.4Measurement report triggering (131)5.5.4.1General (131)5.5.4.2Event A1 (Serving becomes better than threshold) (135)5.5.4.3Event A2 (Serving becomes worse than threshold) (136)5.5.4.4Event A3 (Neighbour becomes offset better than PCell/ PSCell) (136)5.5.4.5Event A4 (Neighbour becomes better than threshold) (137)5.5.4.6Event A5 (PCell/ PSCell becomes worse than threshold1 and neighbour becomes better thanthreshold2) (138)5.5.4.6a Event A6 (Neighbour becomes offset better than SCell) (139)5.5.4.7Event B1 (Inter RAT neighbour becomes better than threshold) (139)5.5.4.8Event B2 (PCell becomes worse than threshold1 and inter RAT neighbour becomes better thanthreshold2) (140)5.5.4.9Event C1 (CSI-RS resource becomes better than threshold) (141)5.5.4.10Event C2 (CSI-RS resource becomes offset better than reference CSI-RS resource) (141)5.5.4.11Event W1 (WLAN becomes better than a threshold) (142)5.5.4.12Event W2 (All WLAN inside WLAN mobility set becomes worse than threshold1 and a WLANoutside WLAN mobility set becomes better than threshold2) (142)5.5.4.13Event W3 (All WLAN inside WLAN mobility set becomes worse than a threshold) (143)5.5.5Measurement reporting (144)5.5.6Measurement related actions (148)5.5.6.1Actions upon handover and re-establishment (148)5.5.6.2Speed dependant scaling of measurement related parameters (149)5.5.7Inter-frequency RSTD measurement indication (149)5.5.7.1General (149)5.5.7.2Initiation (150)5.5.7.3Actions related to transmission of InterFreqRSTDMeasurementIndication message (150)5.6Other (150)5.6.0General (150)5.6.1DL information transfer (151)5.6.1.1General (151)5.6.1.2Initiation (151)5.6.1.3Reception of the DLInformationTransfer by the UE (151)5.6.2UL information transfer (151)5.6.2.1General (151)5.6.2.2Initiation (151)5.6.2.3Actions related to transmission of ULInformationTransfer message (152)5.6.2.4Failure to deliver ULInformationTransfer message (152)5.6.3UE capability transfer (152)5.6.3.1General (152)5.6.3.2Initiation (153)5.6.3.3Reception of the UECapabilityEnquiry by the UE (153)5.6.4CSFB to 1x Parameter transfer (157)5.6.4.1General (157)5.6.4.2Initiation (157)5.6.4.3Actions related to transmission of CSFBParametersRequestCDMA2000 message (157)5.6.4.4Reception of the CSFBParametersResponseCDMA2000 message (157)5.6.5UE Information (158)5.6.5.1General (158)5.6.5.2Initiation (158)5.6.5.3Reception of the UEInformationRequest message (158)5.6.6 Logged Measurement Configuration (159)5.6.6.1General (159)5.6.6.2Initiation (160)5.6.6.3Reception of the LoggedMeasurementConfiguration by the UE (160)5.6.6.4T330 expiry (160)5.6.7 Release of Logged Measurement Configuration (160)5.6.7.1General (160)5.6.7.2Initiation (160)5.6.8 Measurements logging (161)5.6.8.1General (161)5.6.8.2Initiation (161)5.6.9In-device coexistence indication (163)5.6.9.1General (163)5.6.9.2Initiation (164)5.6.9.3Actions related to transmission of InDeviceCoexIndication message (164)5.6.10UE Assistance Information (165)5.6.10.1General (165)5.6.10.2Initiation (166)5.6.10.3Actions related to transmission of UEAssistanceInformation message (166)5.6.11 Mobility history information (166)5.6.11.1General (166)5.6.11.2Initiation (166)5.6.12RAN-assisted WLAN interworking (167)5.6.12.1General (167)5.6.12.2Dedicated WLAN offload configuration (167)5.6.12.3WLAN offload RAN evaluation (167)5.6.12.4T350 expiry or stop (167)5.6.12.5Cell selection/ re-selection while T350 is running (168)5.6.13SCG failure information (168)5.6.13.1General (168)5.6.13.2Initiation (168)5.6.13.3Actions related to transmission of SCGFailureInformation message (168)5.6.14LTE-WLAN Aggregation (169)5.6.14.1Introduction (169)5.6.14.2Reception of LWA configuration (169)5.6.14.3Release of LWA configuration (170)5.6.15WLAN connection management (170)5.6.15.1Introduction (170)5.6.15.2WLAN connection status reporting (170)5.6.15.2.1General (170)5.6.15.2.2Initiation (171)5.6.15.2.3Actions related to transmission of WLANConnectionStatusReport message (171)5.6.15.3T351 Expiry (WLAN connection attempt timeout) (171)5.6.15.4WLAN status monitoring (171)5.6.16RAN controlled LTE-WLAN interworking (172)5.6.16.1General (172)5.6.16.2WLAN traffic steering command (172)5.6.17LTE-WLAN aggregation with IPsec tunnel (173)5.6.17.1General (173)5.7Generic error handling (174)5.7.1General (174)5.7.2ASN.1 violation or encoding error (174)5.7.3Field set to a not comprehended value (174)5.7.4Mandatory field missing (174)5.7.5Not comprehended field (176)5.8MBMS (176)5.8.1Introduction (176)5.8.1.1General (176)5.8.1.2Scheduling (176)5.8.1.3MCCH information validity and notification of changes (176)5.8.2MCCH information acquisition (178)5.8.2.1General (178)5.8.2.2Initiation (178)5.8.2.3MCCH information acquisition by the UE (178)5.8.2.4Actions upon reception of the MBSFNAreaConfiguration message (178)5.8.2.5Actions upon reception of the MBMSCountingRequest message (179)5.8.3MBMS PTM radio bearer configuration (179)5.8.3.1General (179)5.8.3.2Initiation (179)5.8.3.3MRB establishment (179)5.8.3.4MRB release (179)5.8.4MBMS Counting Procedure (179)5.8.4.1General (179)5.8.4.2Initiation (180)5.8.4.3Reception of the MBMSCountingRequest message by the UE (180)5.8.5MBMS interest indication (181)5.8.5.1General (181)5.8.5.2Initiation (181)5.8.5.3Determine MBMS frequencies of interest (182)5.8.5.4Actions related to transmission of MBMSInterestIndication message (183)5.8a SC-PTM (183)5.8a.1Introduction (183)5.8a.1.1General (183)5.8a.1.2SC-MCCH scheduling (183)5.8a.1.3SC-MCCH information validity and notification of changes (183)5.8a.1.4Procedures (184)5.8a.2SC-MCCH information acquisition (184)5.8a.2.1General (184)5.8a.2.2Initiation (184)5.8a.2.3SC-MCCH information acquisition by the UE (184)5.8a.2.4Actions upon reception of the SCPTMConfiguration message (185)5.8a.3SC-PTM radio bearer configuration (185)5.8a.3.1General (185)5.8a.3.2Initiation (185)5.8a.3.3SC-MRB establishment (185)5.8a.3.4SC-MRB release (185)5.9RN procedures (186)5.9.1RN reconfiguration (186)5.9.1.1General (186)5.9.1.2Initiation (186)5.9.1.3Reception of the RNReconfiguration by the RN (186)5.10Sidelink (186)5.10.1Introduction (186)5.10.1a Conditions for sidelink communication operation (187)5.10.2Sidelink UE information (188)5.10.2.1General (188)5.10.2.2Initiation (189)5.10.2.3Actions related to transmission of SidelinkUEInformation message (193)5.10.3Sidelink communication monitoring (195)5.10.6Sidelink discovery announcement (198)5.10.6a Sidelink discovery announcement pool selection (201)5.10.6b Sidelink discovery announcement reference carrier selection (201)5.10.7Sidelink synchronisation information transmission (202)5.10.7.1General (202)5.10.7.2Initiation (203)5.10.7.3Transmission of SLSS (204)5.10.7.4Transmission of MasterInformationBlock-SL message (205)5.10.7.5Void (206)5.10.8Sidelink synchronisation reference (206)5.10.8.1General (206)5.10.8.2Selection and reselection of synchronisation reference UE (SyncRef UE) (206)5.10.9Sidelink common control information (207)5.10.9.1General (207)5.10.9.2Actions related to reception of MasterInformationBlock-SL message (207)5.10.10Sidelink relay UE operation (207)5.10.10.1General (207)5.10.10.2AS-conditions for relay related sidelink communication transmission by sidelink relay UE (207)5.10.10.3AS-conditions for relay PS related sidelink discovery transmission by sidelink relay UE (208)5.10.10.4Sidelink relay UE threshold conditions (208)5.10.11Sidelink remote UE operation (208)5.10.11.1General (208)5.10.11.2AS-conditions for relay related sidelink communication transmission by sidelink remote UE (208)5.10.11.3AS-conditions for relay PS related sidelink discovery transmission by sidelink remote UE (209)5.10.11.4Selection and reselection of sidelink relay UE (209)5.10.11.5Sidelink remote UE threshold conditions (210)6Protocol data units, formats and parameters (tabular & ASN.1) (210)6.1General (210)6.2RRC messages (212)6.2.1General message structure (212)–EUTRA-RRC-Definitions (212)–BCCH-BCH-Message (212)–BCCH-DL-SCH-Message (212)–BCCH-DL-SCH-Message-BR (213)–MCCH-Message (213)–PCCH-Message (213)–DL-CCCH-Message (214)–DL-DCCH-Message (214)–UL-CCCH-Message (214)–UL-DCCH-Message (215)–SC-MCCH-Message (215)6.2.2Message definitions (216)–CounterCheck (216)–CounterCheckResponse (217)–CSFBParametersRequestCDMA2000 (217)–CSFBParametersResponseCDMA2000 (218)–DLInformationTransfer (218)–HandoverFromEUTRAPreparationRequest (CDMA2000) (219)–InDeviceCoexIndication (220)–InterFreqRSTDMeasurementIndication (222)–LoggedMeasurementConfiguration (223)–MasterInformationBlock (225)–MBMSCountingRequest (226)–MBMSCountingResponse (226)–MBMSInterestIndication (227)–MBSFNAreaConfiguration (228)–MeasurementReport (228)–MobilityFromEUTRACommand (229)–Paging (232)–ProximityIndication (233)–RNReconfiguration (234)–RNReconfigurationComplete (234)–RRCConnectionReconfiguration (235)–RRCConnectionReconfigurationComplete (240)–RRCConnectionReestablishment (241)–RRCConnectionReestablishmentComplete (241)–RRCConnectionReestablishmentReject (242)–RRCConnectionReestablishmentRequest (243)–RRCConnectionReject (243)–RRCConnectionRelease (244)–RRCConnectionResume (248)–RRCConnectionResumeComplete (249)–RRCConnectionResumeRequest (250)–RRCConnectionRequest (250)–RRCConnectionSetup (251)–RRCConnectionSetupComplete (252)–SCGFailureInformation (253)–SCPTMConfiguration (254)–SecurityModeCommand (255)–SecurityModeComplete (255)–SecurityModeFailure (256)–SidelinkUEInformation (256)–SystemInformation (258)–SystemInformationBlockType1 (259)–UEAssistanceInformation (264)–UECapabilityEnquiry (265)–UECapabilityInformation (266)–UEInformationRequest (267)–UEInformationResponse (267)–ULHandoverPreparationTransfer (CDMA2000) (273)–ULInformationTransfer (274)–WLANConnectionStatusReport (274)6.3RRC information elements (275)6.3.1System information blocks (275)–SystemInformationBlockType2 (275)–SystemInformationBlockType3 (279)–SystemInformationBlockType4 (282)–SystemInformationBlockType5 (283)–SystemInformationBlockType6 (287)–SystemInformationBlockType7 (289)–SystemInformationBlockType8 (290)–SystemInformationBlockType9 (295)–SystemInformationBlockType10 (295)–SystemInformationBlockType11 (296)–SystemInformationBlockType12 (297)–SystemInformationBlockType13 (297)–SystemInformationBlockType14 (298)–SystemInformationBlockType15 (298)–SystemInformationBlockType16 (299)–SystemInformationBlockType17 (300)–SystemInformationBlockType18 (301)–SystemInformationBlockType19 (301)–SystemInformationBlockType20 (304)6.3.2Radio resource control information elements (304)–AntennaInfo (304)–AntennaInfoUL (306)–CQI-ReportConfig (307)–CQI-ReportPeriodicProcExtId (314)–CrossCarrierSchedulingConfig (314)–CSI-IM-Config (315)–CSI-IM-ConfigId (315)–CSI-RS-Config (317)–CSI-RS-ConfigEMIMO (318)–CSI-RS-ConfigNZP (319)–CSI-RS-ConfigNZPId (320)–CSI-RS-ConfigZP (321)–CSI-RS-ConfigZPId (321)–DMRS-Config (321)–DRB-Identity (322)–EPDCCH-Config (322)–EIMTA-MainConfig (324)–LogicalChannelConfig (325)–LWA-Configuration (326)–LWIP-Configuration (326)–RCLWI-Configuration (327)–MAC-MainConfig (327)–P-C-AndCBSR (332)–PDCCH-ConfigSCell (333)–PDCP-Config (334)–PDSCH-Config (337)–PDSCH-RE-MappingQCL-ConfigId (339)–PHICH-Config (339)–PhysicalConfigDedicated (339)–P-Max (344)–PRACH-Config (344)–PresenceAntennaPort1 (346)–PUCCH-Config (347)–PUSCH-Config (351)–RACH-ConfigCommon (355)–RACH-ConfigDedicated (357)–RadioResourceConfigCommon (358)–RadioResourceConfigDedicated (362)–RLC-Config (367)–RLF-TimersAndConstants (369)–RN-SubframeConfig (370)–SchedulingRequestConfig (371)–SoundingRS-UL-Config (372)–SPS-Config (375)–TDD-Config (376)–TimeAlignmentTimer (377)–TPC-PDCCH-Config (377)–TunnelConfigLWIP (378)–UplinkPowerControl (379)–WLAN-Id-List (382)–WLAN-MobilityConfig (382)6.3.3Security control information elements (382)–NextHopChainingCount (382)–SecurityAlgorithmConfig (383)–ShortMAC-I (383)6.3.4Mobility control information elements (383)–AdditionalSpectrumEmission (383)–ARFCN-ValueCDMA2000 (383)–ARFCN-ValueEUTRA (384)–ARFCN-ValueGERAN (384)–ARFCN-ValueUTRA (384)–BandclassCDMA2000 (384)–BandIndicatorGERAN (385)–CarrierFreqCDMA2000 (385)–CarrierFreqGERAN (385)–CellIndexList (387)–CellReselectionPriority (387)–CellSelectionInfoCE (387)–CellReselectionSubPriority (388)–CSFB-RegistrationParam1XRTT (388)–CellGlobalIdEUTRA (389)–CellGlobalIdUTRA (389)–CellGlobalIdGERAN (390)–CellGlobalIdCDMA2000 (390)–CellSelectionInfoNFreq (391)–CSG-Identity (391)–FreqBandIndicator (391)–MobilityControlInfo (391)–MobilityParametersCDMA2000 (1xRTT) (393)–MobilityStateParameters (394)–MultiBandInfoList (394)–NS-PmaxList (394)–PhysCellId (395)–PhysCellIdRange (395)–PhysCellIdRangeUTRA-FDDList (395)–PhysCellIdCDMA2000 (396)–PhysCellIdGERAN (396)–PhysCellIdUTRA-FDD (396)–PhysCellIdUTRA-TDD (396)–PLMN-Identity (397)–PLMN-IdentityList3 (397)–PreRegistrationInfoHRPD (397)–Q-QualMin (398)–Q-RxLevMin (398)–Q-OffsetRange (398)–Q-OffsetRangeInterRAT (399)–ReselectionThreshold (399)–ReselectionThresholdQ (399)–SCellIndex (399)–ServCellIndex (400)–SpeedStateScaleFactors (400)–SystemInfoListGERAN (400)–SystemTimeInfoCDMA2000 (401)–TrackingAreaCode (401)–T-Reselection (402)–T-ReselectionEUTRA-CE (402)6.3.5Measurement information elements (402)–AllowedMeasBandwidth (402)–CSI-RSRP-Range (402)–Hysteresis (402)–LocationInfo (403)–MBSFN-RSRQ-Range (403)–MeasConfig (404)–MeasDS-Config (405)–MeasGapConfig (406)–MeasId (407)–MeasIdToAddModList (407)–MeasObjectCDMA2000 (408)–MeasObjectEUTRA (408)–MeasObjectGERAN (412)–MeasObjectId (412)–MeasObjectToAddModList (412)–MeasObjectUTRA (413)–ReportConfigEUTRA (422)–ReportConfigId (425)–ReportConfigInterRAT (425)–ReportConfigToAddModList (428)–ReportInterval (429)–RSRP-Range (429)–RSRQ-Range (430)–RSRQ-Type (430)–RS-SINR-Range (430)–RSSI-Range-r13 (431)–TimeToTrigger (431)–UL-DelayConfig (431)–WLAN-CarrierInfo (431)–WLAN-RSSI-Range (432)–WLAN-Status (432)6.3.6Other information elements (433)–AbsoluteTimeInfo (433)–AreaConfiguration (433)–C-RNTI (433)–DedicatedInfoCDMA2000 (434)–DedicatedInfoNAS (434)–FilterCoefficient (434)–LoggingDuration (434)–LoggingInterval (435)–MeasSubframePattern (435)–MMEC (435)–NeighCellConfig (435)–OtherConfig (436)–RAND-CDMA2000 (1xRTT) (437)–RAT-Type (437)–ResumeIdentity (437)–RRC-TransactionIdentifier (438)–S-TMSI (438)–TraceReference (438)–UE-CapabilityRAT-ContainerList (438)–UE-EUTRA-Capability (439)–UE-RadioPagingInfo (469)–UE-TimersAndConstants (469)–VisitedCellInfoList (470)–WLAN-OffloadConfig (470)6.3.7MBMS information elements (472)–MBMS-NotificationConfig (472)–MBMS-ServiceList (473)–MBSFN-AreaId (473)–MBSFN-AreaInfoList (473)–MBSFN-SubframeConfig (474)–PMCH-InfoList (475)6.3.7a SC-PTM information elements (476)–SC-MTCH-InfoList (476)–SCPTM-NeighbourCellList (478)6.3.8Sidelink information elements (478)–SL-CommConfig (478)–SL-CommResourcePool (479)–SL-CP-Len (480)–SL-DiscConfig (481)–SL-DiscResourcePool (483)–SL-DiscTxPowerInfo (485)–SL-GapConfig (485)。
新浪游戏_最大中文游戏媒体
新浪游戏_最大中文游戏媒体标签Tags:新浪首页>> 南方暴雨视频集博客精彩图片回顾与黄健翔同泡世界杯新浪过客退出网页网页新闻网页搜索(Powered by Google) 新闻搜索新闻军事体育英超 NBA 财经娱乐玩玩游戏博客微博科技星座房产汽车女性视频读书教育旅游播客大片论坛邮箱导航不支持Flash推荐：游戏产业周刊玩家周刊游戏沸点新域名：请输入关键字频道原创┊新闻┊玩玩┊ -->网络游戏┊单机游戏┊小游戏┊网页游戏┊电视┊手游┊产业┊电竞新网游新版新服┊排行服务新手卡中心┊直播┊活动┊下载┊论坛┊博客┊播客┊漫画┊爱问┊UT┊电台┊公会┊协会┊专题┊展会┊工委热门游戏推荐新游联合运营网页玩玩热词：lady show业内佳丽玩玩平台内测招商美女助理报名更多游戏>>游戏平均在线人数规模（半年期）100万↑魔兽世界穿越火线梦幻西游地下城与勇士征途50万↑ 梦幻诛仙问道大话西游2诛仙2劲舞团跑跑卡丁车 30万↑ 成吉思汗神鬼传奇绿色征途魔域20万↑ 蜀门QQ炫舞兽血沸腾龙OL完美国际天下2西游记街头篮球 10万↑ 武林外传万王之王3名将三国战地之王梦想世界创誓记热血江湖赤壁传奇世界开心OL巨人QQ华夏FIFAOL2 10万→ 降龙之剑剑侠情缘3精灵乐章纳雅外传魔力宝贝仙魔OL佣兵天下永恒之塔纷争OL仙途寻仙反恐OL 新专区神魔大陆石器时代2龙之谷狼队OL三国群英传OL2 七龙珠OL热门单机：星际争霸2战神3古剑奇谭C&C4 本周测试网游征途2(周一)兽血外传(周二)新绝代双骄(周三)盛大版剑网3(周四)K1拳霸天下(周四)仙途(周四)更多>>新游产品库热门产品库：火炬之光英雄联盟剑灵OLQQ仙侠传魔界2封神榜叁勇士OL倩女幽魂晶铁之门佣兵天下仙网球宝贝最新入库（5.12-5.14）：上古神殿iTown侠道金刚K1拳霸天下西夏OL兽血外传倚天剑与屠龙刀2洛汗梦幻蜀山外服新游：洛奇英雄传激战2TERA纽沃斯英雄七魂OLC9开发中新游：御龙在天笑傲江湖OL 九阴真经星辰变（排名不分先后）新浪运营游戏列表大型网游：侠义道侠义道II新侠义道剑侠世界新浪版碧雪情天抗战机战星际家园2玩玩平台测试版上线（排名不分先后）新浪运营网页游戏汇总英超疯狂大陆足球文明英雄之城篮球经理三国风云武林三国武林英雄中超ONLINENB篮球明星新浪职业篮球明1644 无名飘渺仙剑地产风云永恒塔防铁血英雄封神无敌剑侠情缘web 不支持Flash一周测试新游一览（5.17��5.23）[K1拳霸天下][盛大版剑网3][十二封印之龙图腾][征途2]游戏产业周刊：网游收费模式走向何方[韩老人喜欢玩游戏][宅营销真相揭秘][一周产业热闻排行]走在时尚前沿游戏服装六种风格大盘点[范冰冰万王3COS服装一元起拍][魔兽玩家身着游戏服婚纱]盛大5月26日在沪举办Allstar新品发布[新游激活码与试玩体验回馈玩家][选址上海音乐厅][更多]《西游记》首部资料片定名八戒娶亲[西游记专区][特色游戏壁纸公开][兽兽与网游结缘]更多>> 梦幻江湖：如此服务器我想砸电脑随机触发任务剧情,哪个保举我一个游戏？，画面设定过于简单，各种怪异设定……[讨论] 风色幻想OL：希望你能走得长远风格可爱、剧情诱人，任务完全脱节、打斗效果单调……[讨论] 永久基地：花钱太多，游戏平庸基因系统提高游戏性,完美国际的YJ到85级后怎么升级快?除了吃书和做别墅石头，任务系统不全面、过于花钱……[讨论] var subid = '311'; var gamename = '《兽血外传》PK《兽血沸腾》'; var gametime = '2010-05-17'; var gameurl ='/p/2010-05-17/1911/311.shtml';document.write(" 【榜评】 function $(id){returndocument.getElementById(id)} functioncreateScript(url,charset,id){ var head =document.getElementsByTagName('head')[0]; var oldScript = $(id); if (oldScript) { head.removeChild(oldScript); } var newScript = document.createElement('script'); if (charset) { newScript.charset = charset; } else { newScript.charset = 'gb2312'; } newScript.id = id; newScript.type = 'text/javascript'; newScript.src = url;head.appendChild(newScript); } //投票 js function set_height(){ } //得到投票的最大值 function getmax(){ var temp = 0; for(var i in Data[126]) { if(temp游戏微博投稿更多>> 热门博文推荐博客官方博客世博妞吐苦水中超OL宝贝樱萘女神COS老千游戏那些让人无语的雷人名子魔女洛可可解开伪娘困惑直击游戏男女问题小藤再一次，触摸那一朵“汉之云” 天赐妮子闪耀着中国传统文化光芒的网游密语森林风谈谈那些和游戏有关的几部电影古月圣原创：浅论国产单机盗版之痛与冰网游炒作，兽兽下来是闫凤娇天赐妮子国外十大优秀太空题材网页游戏子夜迅雷进军网游拾人牙慧OR华丽转身北冥冰产品差异化将成为页游发展的出口精品官博：成吉思汗星空传奇梦幻江湖蜀门梦幻迪士尼麒麟游戏绿色征途龙的传人龙门传世群英传梦幻情天神鬼传奇苍穹之剑问仙游戏微博：夜色地带水月深蓝美国木匠和尚魔女洛可可游戏纵横不当记者温刀微博风贼百万博客：枫枫漫画绯红月影贝莉博客美美小苍mm博客吴理漫画雅雅日志落花无痕书乐媒体博客：姚宇博客黄金体验大众软件彦卿 WE.IGE.Sky 电玩星球兜兜博客雨润博客其他游戏美眉：糖水小月路西非尔修罗古蝶萌萌颖涵大宝贝百变楚楚君君公主本色小颜樱萘精品动漫：黑暗王朝姬姒镜伊有陇西峰赵骐平衡的囚徒伊灵希娜飞血居士雾河小舟夜色福音之骑士慕容引刀飞天桔子麻辣特工舒逸投稿讨论更多>> 新浪游戏Lady Show 新浪游戏Lady Show，带你一起走近游戏圈的女性世界。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
4. 用户界面
● 用户界面区域
[用户]界面可以显示小组以及登录小组的用户.选择小组和小组登录的用户时,可以按 鼠标右键,使用弹出窗口菜单中的功能.
3
2
2
3
4
① [用户界面]: 显示小组及小组的用户 ② [小组用户选择弹出窗口]:显示有关小组用户的弹出窗口菜单 ③ [小组选择弹出窗口]:显示有关小组弹出菜单 ④ [IPT功能]: 在用户个人信息以及②,③弹出窗口中,可以使用”打电话” 邮件”等功能.
● 网名变更
变更Messenger中显示的网名.指定的网名会显示给所有登录这个小组的用户.
1 2
3
①[网名变更]:选择网名变更的功能 ② [网名变更]:请输入想变更的网名 ③ [网名变更]:变更的网名显示在状态的旁边
向登录小组的用户显示我的网名.
2. 业务功能
● 业务功能界面的构成
业务标签区域是根据用户的喜好,能够随意地构成使用的功能. 经常使用的功能可以变更到更前面的位置,能够更加便利的使用.
6. 收藏夹 界面
● 收藏夹 构成
[收藏夹]的功能是登录网站的URL以及设置的应用程序后,点击便可以直接使用该网站 以及应用程序.
2
5
6
1
3 4
① [收藏夹]:移动到收藏夹画面 ② [默认功能]:Messenger的默认功能已登录. ③ [URL收藏夹]:登录到URL收藏夹的话,可以随时移动页面. ④ [程序收藏夹]:登录程序收藏夹的话,可以随时启动. ⑤ [URL收藏夹功能]:URL收藏夹功能的弹出窗口.
பைடு நூலகம் Ⅱ. 使用
1. 主UI 说明 - 状态信息/网名变更 - 业务功能 - 小组用户搜索 - 用户 - 组织图 - 收藏夹
2. 综合信息箱 3. 使用通信功能
- 使用小纸条 - 1:1聊天 - 传送文件 4. 环境设置 - 基本设置 - 个人设置 - 功能设置 - 声音设置 - 标签菜置 - 服务器设置 - 自动应答 - 便条 5. 其他说明
● 设置向导
显示通讯工具向导画面
单击[下一步]进行设置
● 指定设置路径
双击要设置的通讯工具的文件后,只要根据向导进行,就可以安装通讯工具.
会显示默认的设置路径.如果要更改路径,点击查找,可以更改路径. ※注意:设置前,请先确认磁盘的剩余空间是否充足.
● 设置过程
通讯程序的安装进度会在电脑上显示.
● 完成设置
[书写部门小纸条]: 只能向选择的部门的成员书写小纸条 ③ [窗口分离]:可与群的窗口分离,单独浏览.
● 部门职员 选择 弹出菜单.
[组织图]显示构成公司内部的组织信息及该组织中所属的用户.
[书写小纸条:将选择的部门职员作为收件人,启动书写小纸条窗口. [聊天]:将选择的部门职员作为收件人,启动聊天窗口. [邮件传送]:将选择的部门职员作为收信人,启动文件传送窗口. [个人信息]:显示选择的部门职员的个人信息. [目录排列]:可以按[职位][在线][姓名]顺序进行排列浏览. [在小组中登录] :将选择的部门职员登录到指定的小组中. [远程协助]:向选择的用户申请远程协助. [写邮件]:为了给用户写邮件,呼出默认的邮件程序.
设置完成后,点击[完成],设置过程结束.
标记[Run Messenger]后点击[完成]的话,就会运行通讯工具.
登录/退出
1. 登录
● 通讯工具 运行
双击桌面上的通讯工具图标就可以运行. CJ World Messenger
设置完Messenger后,在桌面上生成快捷方式图标,双击即可运行.或者是点击[开始] [程序] [CJ World Messenger] [CJ World Messenger] ,也可以运行.
● 部门选择 弹出菜单
[部门选择弹出菜单]可以使用与选择的部门相关的功能.特别是连下属部门都包含的 功能与只能给选择的部门职员提供的功能能够分离,能够为职员之间进行通讯联系提 供更大的方便.
1 2 3 3
① [显示下位部门]”启动所选部门包含下属部门的功能. ② [部门构成职员}: 仅可以向选择部门的成员启动功能.
根据用户权限的不同,弹出窗口可能显示不同的内容.
● 业务功能界面菜单 登录
构成及编辑Messenger左侧经常使用的菜单.可以改变指定菜单的顺序进行使用.
1
3
2 4
① [菜单设置] 显示在Messenger中可以使用的菜单目录
② [添加/删除] 可以添加或删除Messenger左边画面构成的菜单.
● 用户选择弹出 菜单
[用户选择后 弹出窗口]菜单是指以弹出窗口的方式向您显示与所选用户相关的可以 使用的功能.
[个人信息]:显示用户个人信息的窗口. [浏览聊天记录]:在综合信息箱中搜索与相对用户聊天的内容. [别称设定]: 设定登录用户的别称 [浏览迷你小窝]:显示CJ集团职员的CJ World内的小窝. [书写小纸条]:将选定的用户作为收信人并启动书写小纸条窗口. [聊天]:将选定的用户作为收信人并启动聊天窗口 [迷你聊天]:生成与选定用户迷你聊天窗口. [文件传送]:将选定的用户作为收信人并启动文件传送窗口. [书写邮件]: 生成写邮件的窗口 [远程协助]: 控制选定用户的电脑，启动远程协助程序 [小组移动]:可以将选择的用户移动到指定的小组中. [复制到小组]:把选择的用户添加到指定的小组中. [在小组中删除]]:将选择的用户在所属的小组中删除. [显示用户目录]:选择显示用户目录的排列方法
1
2
4 3
5
① [关键词 输入]:输入想查询的小组用户. ② [整体用户搜索]: 单击搜索键时,可以显示所有的用户. ③ [在线用户搜索]:显示在线的用户.
输入关键词时,仅显示符合条件的用户. ④ [返回]: 用户显示,整体搜索后,重新回到初始状态. ⑤ [搜索结果]: 显示整体用户中符合条件的用户.
● 添加小组
[添加小组]的功能是指根据用户输入的小组名可新建一个小组. 1
2
① 单击[小组添加]键 ② [新小组 添加]:请输入想要添加的小组名.
不能使用像[@#$%&(),-]的特殊文字.
● 用户目录排列
[目录排列]是指可以将在小组里注册的用户,按照指定的顺序显示出来.特别是登录的 小组及用户多的情况,适当的加以使用的话,可以更加方便的浏览想要聊天的用户.
1
2
① [业务标签]: 想使用的业务功能灵活性的构成状态. ② [滚动条]: 登录的业务功能偏多时,会自动激活滚动条的功能.
● 为业务标签构成的环境设定
.业务标签可以根据用户的需要构成.在[环境设定]中,根据选择的功能和优先顺序来构 成菜单. 1
① [设定]: 单击打开弹出菜单 ② [环境设定]: 设定Messenger中使用的各个功能 ③ [自定义标签右击]:右击自定义标签时,会激活标签菜单按键 ※ 小贴示:也可以 参照本帮助里环境设置中的[界面菜单].
注销
● 注销/退出
利用窗口右下端的Messenger 图标菜单进行注销. 2
2
3 1
① [Messenger 弹出菜单] 右击窗口右下方的Messenger 图标
② [注销] 转换为Messenger 注销和登录的画面.
③ [Messenger 退出] 注销Messenger ,然后完全退出程序.
● 小组选择 弹出窗口菜单
[小组选择后 弹出窗口]菜单是指以弹出窗口的方式向您显示与所选小组相关可以使 用的功能.
[小组小纸条传送]:向所选小组的用户传送小纸条. [与小组聊天]:与选择的小组用户(在线用户)聊天 [与小组迷你聊天]:与选择的小组用户(在线用户)进行迷你聊天 [添加小组]:添加新的小组 [更改姓名]:更改选择的小组名 [删除小组]:删除选择的小组.这是该小组的用户也被同时删除. [小组目录传送]:向指定的用户传送选择的小组及其用户的信息.收信用户可以直接登 录并使用该小组. [成员登录(搜索用户)]:启动用户搜索画面窗口 [打开全部小组]:所有小组转换为打开状态 [关闭所有小组]:所有小组转换为关闭状态.
③ [使用中的菜单] 现在已设定的菜单目录及顺序.
④ [指定顺序] 可以编辑显示在Messenger中菜单的顺序的功能 可以变更为从上到最上,上一层,下一层,最下层的功能.
3. 小组用户搜索
● 小组用户搜索
[小组用户搜索]是指可以通过姓名搜寻需要的已登录的用户.特别是根据分组的不同, 可以更加便利的搜索出来.
E-Mail 信息等 ⑦ [用户], [组织图], [收藏夹], [其他] 等标签功能 ⑧ [外部搜索] : 可以显示于Google , Naver ,Daum,Nate的搜索结果 ⑨ [广告条功能] : 显示管理员所登录的广告(内部用/外部用广告) ⑩ [Ticker功能] :显示Messenger上的公告事项,各公告事项在短时间周期内按顺序
● [用户搜索]
[用户搜索]功能是指根据输入的关键词,以Messenger中全体用户为对象进行搜索并 显示结果的功能.
1
2
[사용자검색]
① [用户搜索]:单击后显示Messenger中适用用户的姓名.这时,会详细的显示搜索结 果和用户的信息. ② [小组登录]: 可以将搜索的用户添加到用户登录的小组中.
● Messenger 登录
利用Messenger 登录帐户信息,输入ID和密码后,点击登录键登录.
1 2
① [登录帐户 输入] 输入使用Messenger 需要的ID和密码 [登录]:单击利用输入的帐户信息登录.
② [密码变更]: 初次登录时,会生成密码变更的画面,密码变更后才能使用. ※ 注意: 不能90天以上使用同一个号码.
Main UI
1. UI 构成
● 用户菜单区域
1 3
7 4 5
11
6
2 8