54 StanDoc-051103
Desigo PX Automation stations modular series PXC..
CM1N9222en_192022-05-11Smart Infrastructures92229222P 01Desigo™ PXAutomation stations modular seriesPXC....D PXC...-E.D PXA40-…∙Freely programmable modular automation stations for HVAC and building services plants.∙Communications – BACnet/IP– BACnet/LonTalk∙BTL label (BACnet communications is BTL tested)∙Comprehensive management and system functions (alarm management,time schedules, trends, access protection, etc.)∙Connection of TX-I/O modules with any data point mix∙Connection of TX Open modules for the integration of third-party devices ∙Integration of L ON M ARK ®-compatible devices ∙Integrated web server for generic operation∙For stand-alone applications, or for use within a device or system network ∙Scalable range of touch panels and local and remote operating devicesValidityThis data sheet is valid for firmware Desigo V6.1 and higher.For older devices / firmware see data sheet CM1N9222en_13.FunctionsModular, freely programmable automation stations for HVAC and building controlsystems.∙Management functions (alarm management with alarm routing, schedulers,trend functions, remote management, access protection with individually defineduser profiles and categories).∙For stand-alone applications or for use within a device or system network.∙BTL-tested BACnet communications on LonTalk, PTP or IP, compliant withBACnet standard (Rev. 1.12 -for Desigo V6.0 and later) including B-BC profile.∙AMEV profiles AS-A and AS-B to recommendation "BACnet 2011 - Version 1.2(for Desigo V6.0 and later)".∙Freely programmable, using the D-MAP programming language (closeresemblance to CEN standard 11312). All function blocks, available in libraries,can be graphically connected.∙Engineering and commissioning using the Desigo Xworks Plus tool.∙Connection of field devices to a customized mix of TX-I/O modules.∙Connection of installed PTM-I/O modules – the perfect solution to migrate legacysystems.∙Connection of TX Open modules to integrate third-party devices such asvariable speed drives, pumps or energy counters.∙Connection of detached I/O islands with integration.∙Connection of LonMark® compatible devices∙Low voltage protection and start-up management to protect the devices againstfluctuating voltage.∙Scalable range of touch panels, Web solutions and operator units.Modular automation station with connected TX-I/O modulesOverview of automation stations – modular seriesConnection of TX-I/O modules, TX Open modules, PTM-I/O modules via PXX-PBUS and LonWorks devices via PXX-L11/12.Activation of generic Web operation with PXA40-W1BACnet/IP PXC00-E.D PXC50-E.D PXC100-E.D PXC200-E.DBACnet/LonTalk PXC00.D PXC50.D PXC100.D PXC200.DNumber of physical data–80200350points TX-I/ONumber of TX Open–555Modules for e.g. Modbus,M-BusNumber of data points–4006001000(TX-I/O and TX Open)Number LonWorks60 or 120 1060 or 1201)60 or 1201)Devices via PXX-Lx1)In concurrent use with TX-I/O modules, the number of devices is reduced inrelation to capacityExtension capabilities of the automation stationsTXM1.. : The flexible range of TX-I/O modules for signaling, measuring,counting, switching, and positioning. The I/O modules with local manual control on the module housing permit the operator to control the equipment manually directly from the cabinet.TX-I/O devices 1)TypeData sheet Digital input module 8 or 16 I/O points TXM1.8D,TXM1.16D CM2N8172Universal module without / with local operation and LCDTXM1.8U,TXM1.8U-ML CM2N8173Super universal mod. without / with local operation and LCD TXM1.8X,TXM1.8X-ML CM2N8174Relay module without / with local operationTXM1.6R,TXM1.6R-M CM2N8175Resistance measuring module (for Pt100 4-wire)TXM1.8P CM2N8176Relay module bistable TXM1.6RL CM2N8177Triac moduleTXM1.8T CM2N8179Power supply module 1.2 A, Fused 10A TXS1.12F10CM2N8183Bus interface module,Fused 10ATXS1.EF10CM2N81831)TXM1... und TX Open modules require TXS1.12F10power supply modules.TX Open : Flexible TX Open platform to integrate third-party systems anddevices such as Modbus or M-Bus. Tested integrations solutions and appli-cations based on our large know how.TX Open devices 1)TypeData sheet TX Open module up to 40 data points TXI2-S.OPEN CM1N8187TX Open moduleup to 160 data pointsTXI2.OPEN CM1N81871)TXM1... und TX Open modules require TXS1.12F10power supply modules.PXX-L11/12.. : Extension modules allow for flexibly connecting LonWorksdevices such as room controllers and third- party devices.PXX-.. devices 2)Type Data sheet Integration of max. 60 devices (PXC50..D: max. 10 devices)PXX-L11CM1N9282Integration of max. 120 devices (PXC50..D: max. 10 devices)PXX-L12CM1N92822)A high number of LonWorks devices reduces the performance of the PXC for connected TX-I/O or PTM-I/O data points respectively.PXX-PBUS : The extension module allows connecting installed PTM-I/Omodules to PXC50/100/200…D automation stations, making them the perfect solution to migrate legacy systems.PXX-.. device Type Data sheet PBUS extension module PXX-PBUS CM1N9283Note:One supply module TXS1.12F10 is required as bus supply for the P-bus for each P-bus strand. A TXS1.12F10 can supply max. 64 load units (1 LU = 12.5 mA, DC 24 V)Limits of the PXX-PBUS extension module:∙DB (Function blocks instances): 1500∙Trends: 100∙Local BACnet references. 100To prevent high cycle times of the PXX-PBUS extension module:∙Only use PXC100-(E).D controllers together with PXX PBUS; do not use PXC 200 controllers.∙Do not connect PXX-L11 or PXX-L12 or PX Web modules (WO-W2) together with PXX-PBUS on the same controller.∙Do not use WebServer functionality on PXC, when using PXX-PBUS.∙Do not extend existing applications from PXC128-U or PXC64-U with new functionality.TXA1.IBE : Remote IO Islands with IntegrationEasy to use solution via simple adapter for remote TX-I/O and TX Open. No programming/ parameterization required.Device Type Data sheet Island bus expansion module TXA1.IBE CM2N8184Device combinations with the automation stationsDesigo Control PointDeviceType Data sheet BACnet touch panels with integrateddata management and web serverfunctionality:7.0 "10.1 ", 15.6 "PXM30.EPXM40.E, PXM50.EA6V10933111A6V10933114 BACnet/IP web server with standardfunctionalityBACnet/IP web server with enhancedfunctionalityPXG3.W100-1PXG3.W200-1A6V10808336Client touch panels with datamanagement in the PXG3.Wx00-1web server7.0 "10.1 ", 15.6 "PXM30-1PXM40-1,PXM50-1A6V10933111A6V10933114 Operator units for automation stationsType Data sheet Local operating unit PXM10CM1N9230 Network operator unit in aBACnet/IP network1)PXM20-E CM1N9234Network operator unit in aBACnet/LonTalk network1)PXM20CA1N9231Cable (3 m) between PXM10 orPXM20 and PXC....DPXA-C1--1) In the case of a PXC....D automation station, one PXM10 and one PXM20operator unit may be connected, but not twice the same type.AccessoryAdapter for Firmware download PXA-C2Mechanical designThe compact construction enables the automation stations to be mounted on astandard mounting rail.PXC....D5671Plastic housing2Cover to interface for extension module3Front cover or PXM40-W1 option module4Plug-in terminal block with screw terminals (operating voltage)5Interface for network, operator units, tool, etc.6LED display for devices and system status7Island bus connector (not on PXC00…)8Slider for mounting on DIN rail9Battery for real time clock (Lithium Type CR2032 or optionally BR2032):Backup during power breakdown.10Battery for trend data and present parameters (Lithium Type FR6/AA):Backup during power breakdown.11Reset pin: Pressing the pin forces a restart.12Firmware pin: If the pin is pressed during restart (reset), the present DMAPprogram is deleted from the FLASH.13Service pin: To identify the automation station in the IP network / LonWorksnetwork during commissioning.1)If one of the batteries has low charge the "BAT" LED lights up ant the automation station sends a system event.Remaining battery life after a "Low batt" event:∙ Battery for real time clock (Type CR2032 or optionally BR2032): several days.∙ Battery for trend data and present parameters (Type AA Lithium): approx. 15hrs. Alkaline: several days.∙ As long as there is an external power supply, the battery may be removed for unlimited time.∙ To prevent hardware damage by electrostatic discharge (ESD), a wrist strap with earth cable must be used during the battery change.∙ Note the special disposal notes on Li batteries.∙ Devices Series A: Do not replace an alkaline battery with a Lithium battery!*)Wink command pattern:9222z02Battery changeSTOPCaution!Technical dataGeneral device data Operating voltage AC 24 V ± 20% (SELV / PELV) orAC 24 V class 2 (US)Safety extra-low voltage SELV orExtra-low voltage PELVHD 384Operating frequency50/60 HzEnergy consumption Max. 24 VA (same for all types)Internal fuse 5 AOperating data Processor Motorola Power PC MPC885Storage64MB SDRAM / 32MB FLASH(96MB total)Accuracy class0.5Data backup in event of power failure Battery Backup of realtime clock∙Lithium Type CR2032 (optionallyBR2032) (field replaceable)Battery operation (cumulative): 10 yearsWithout load: 10 yearsBattery Backup of SDRAM 1x AA:(field replaceable)∙Lithium Type FR6/AA:Devices series B and later∙Alkaline: Devices series BBattery operation (cumulative): min. 2 weeksWithout load: Lithium 10 yearsWithout load: Alkaline 4 yearsCommunication interfaces PXC....D PXC...-E.DBuilding Level Network L ON W ORKS FTT Transceiver(screw terminals(B))10 Base-T / 100 Base-TX IEEE802.3, Auto-sensing (RJ45(D))Local communication (HMI) (RJ45(C))∙PXM20 (BACnet/LonTalk) *) Connection cable max. 3 mLocal communication (HMI, Tool) (RJ45(E))∙PXM10 (serial)∙PXM20 (BACnet/LonTalk) *)∙FW Download Tool Connection cable max. 3 mLocal communication (HMI) (RJ45(G))∙PXM10 (serial)Connection cable max. 3 m∙PXM10 (serial)Connection cable max. 3 mUSB host interface (Modem)∙RS232 modem (via USB-RS232adapter PXA-C3)∙RS232 modem (via USB-RS232adapter PXA-C3)USB device interface(for future applications)(for future applications)Ethernet interfaceInterface type100BaseTX, IEEE 802.3 compatible Bit rate10 / 100 MBit/s, autosensingProtocol BACnet on UDP/IPPin RJ45 socket, screenedL ON W ORKS bus interfaceNetwork TP/FT-10Baud rate78 kBit/sProtocol BACnetInterface chip Echelon Processor TMPN3150B1AFIsland bus interface (CD, CS )Protection Short-circuit proof Short-circuit proof*) only ONE PXM20 per automation stationPlug-in screw terminal Power supply, bus, signals Solid or stranded conductors0.25…2.5 mm2 or 2 x 1.5 mm2Simple cable lengths, cable types (see Installation Guide PX, CA110396)Connection cable Ethernet and PXM20-E Max. 100 mCable type Standard at least CAT5UTP (Unshielded Twisted Pair)or STP (Shielded Twisted Pair) Connection cable L ON W ORKS bus See Installation Guide CA110396 Cable type CAT5Connection cable PXM10Max. 3 mConnection cables for island bus See CM110562Protection data Housing protection standard IP 20 to EN 60529Protection class III to EN 60730-1Ambient conditions Normal operation To IEC 60721-3-3Environmental conditions Class 3K5Temperature0...50 °CHumidity5…95 % r.h. (non-condensing)Mechanical conditions Class 3M2Transport To IEC 60721-3-2Environmental conditions Class 2K3Temperature-25…70 °CHumidity5…95 % r.h. (non-condensing)Mechanical conditions Class 2M2Standards, guidelines and approvals Product standard EN 60730-1Automatic electrical controls forhousehold and similar useProduct family standard EN 50491-x General requirements for Home andBuilding Electronic Systems (HBES)and Building Automation and ControlSystems (BACS)Electromagnetic compatibility (Applications) For use in residential, commerce,light-industrial and industrialenvironmentsEU conformity (CE)CM1T9222xx *)UL certification (US)UL916/FCC CFR 47 Part 15 Class BRCM-conformity (EMC)CM1T9222en_C1 *)EAC conformity Eurasia conrformityAMEV: Supports profiles AS-A and AS-B asof AMEV guideline "BACnet in publicbuildings"BACnet 2011 en, V1.1Environmental compatibility Product environmental declaration (containsdata on RoHS compliance, materials compo-sition, packaging, environmental benefit,disposal)CM1E9222 *)Dimensions See “Dimensions”Weight Excluding packaging With packagingAll types0,489 kg0,531 kg*) The documents can be downloaded from /bt/download.Connection terminals and interfacesPXC....DPXC...-E.D1, 224 V ~, Operating voltage AC 24 VPlug-in screw terminal block 3Functional ground(A)USB host interface (for modem via PXA-C3 adapter cable)4,5 (B) CLA, CLB L ON W ORKS bus Plug-in screw terminal blocks(C)HMI RJ45 interface (L ON W ORKS) for operator unit PXM20 (tool as well)(D)RJ45 interface for Ethernet(Operator unit PXM20-E can be connected to hub/switch)(E)HMI / Tool RJ45 interface (L ON W ORKS and serial) for PXM10, PXM20 and tool(F)USB device interface (for future applications)(G)HMI RJ45 interface (serial) for operator unit PXM10Pin assignment for RJ45 plugPin descriptionPin description9222z 128 7 6 5 4 3 2 11. L ON W ORKS Data A (CLA)2. L ON W ORKS Data B (CLB)3. G0 / GND4.G / Plus5. Unused6. Unused7. Unused8.UnusedRJ45 socket screened, standard connection in accordance with AT&T2569222z 128 7 6 5 4 3 2 11. Tx+2. Tx –3. Rx +4.Unused5. Unused6. Rx –7. Unused8.Unused9222z 128 7 6 5 4 3 2 11. L ON W ORKS Data A (CLA)2. L ON W ORKS Data B (CLB)3. GND4.+24 V max. 300 mA (PXM20)5. Unused6. Unused7. COM1 / TxD 8. COM1 / RxD9222z 128 7 6 5 4 3 2 11. unused2. unused3. G0 / GND4. G / Plus5. Unused6. *)7. COM1/TxD 8. COM1/RxD*) 6Unused(PXC….D)Connected to pin 8(PXC…-E.D)Connection diagramsSee Planning and Installation Guide TX-I/O, CM110562.Plug (C)"HMI" (L ON W ORKS )Plug (D)EthernetPlug (E)"HMI / Tool"(L ON W ORKS and serial)Plug (G)"HMI" (serial)Connecting TX-I/O modules and field devicesDimensionsAll dimensions in mmAutomation stations, system controllers PXC….DDisposalThe device is considered electrical and electronic equipment for disposal interms of the applicable European Directive and may not be disposed of asdomestic garbage.∙Dispose of the device through channels provided for this purpose.∙Comply with all local and currently applicable laws and regulations.∙Dispose of empty batteries in designated collection points.Lithium batteries: May catch fire, explode or leak. Do not short circuit,charge, disassemble, dispose of in fire, heat above 100 °C, or expose towater.Disposal: Seal battery terminals with tape.Issued by:Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1aCH-6300 Zug+41 58 724-2424/buildingtechnologies© Siemens Switzerland Ltd 2009 Delivery and technical specifications subject to change。
D-Link Assist Product 参考指南
IP Surveillance Firewalls Wireless Switching Other DCS-3110DFL-210DWL-2200AP DEM-201F DES-1210-52DMC-1001 DCS-3411DWL-3200AP DEM-201FL DES-1252DMC-1002 DCS-5220DWL-3260AP DEM-210DES-3010F DMC-300SC DCS-5230DWL-3500AP DEM-211DES-3010G DMC-515SC DCS-60DWL-8200AP DEM-301G DES-3026DMC-530SC DCS-70DWL-8500AP DEM-301T DES-3028DMC-700SC DCS-7110DWL-P200DEM-310GT DES-3200-10DCS-80-6DWL-P50DEM-311GT DES-3200-18DVS-210-1DEM-312GT2DES-3200-28FDVS-310-1DEM-330R DES-3526DEM-330T DES-3526DCDEM-331R DES-3828DCDEM-331T DES-7200-48PDEM-340MG DES-7206-FANDEM-340T DES-7210-FANDEM-423XT DGS-1008PDEM-CB300CX DGS-1016DDEM-CB50DGS-1024DDES-1016D DGS-1210-10P DES-1016R+DGS-1210-16 DES-1024D DGS-1210-24 DES-1024R+DGS-3200-10 DES-1026G DPS-200 DES-102F DPS-500 DES-1100-16DPS-800 DES-1100-24DPS-900 DES-1210-08P DPS-CB400 DES-1210-28DSR-1000NBronzeDAS-C-1YNBD 1 Year Next Business Day Swap Service 1 yearDAS-C-3YNBD 3 Year Next Business Day Swap Service 3 years SilverDAS-C-1YSBD 1 Year Same Business Day ( 9 x 5 x 4) Swap 1 yearDAS-C-3YSBD 3 Year Same Business Day ( 9 x 5 x 4) Swap 3 years CGoldDAS-C-3Y247 3 Year 24 x 7 x 4 Swap Service 3 yearsDAS-C-1Y247 1 Year 24 x 7 x 4 Swap Service 1 year Extended Warranty DAS-C-3YWTY 3 Year Warranty Extension 3 yearsIP Surveillance Firewalls Wireless Switching Other DCS-3430DAP-2590DEM-314GT DES-3550DMC-1000 DCS-3710DAP-2690DEM-315GT DES-3552DCS-5605DWL-8600AP DEM-410X DES-3828DCS-5635DEM-421XT DGS-1210-48DCS-6110DEM-410CX DGS-1224TPDCS-6111DES-1210-28P DGS-3100-24PDCS-6511DES-1228P DGS-3100-48DCS-7410DES-3028P DGS-3024DCS-7510DGS-3048DGS-3100-24DNS-722-4DES-3052DGS-3100-24TGDNS-726-4DES-3052P DGS-3312SRDES-3528DPS-500DC DES-3528P DPS-600Extended WarrantyB SilverGoldBronzeDAS-B-1Y247 1 Year 24 x 7 x 4 Swap Service 1 yearDAS-B-3Y247 3 Year 24 x 7 x 4 Swap Service 3 yearsDAS-B-1YSBD 1 Year Same Business Day ( 9 x 5 x 4) Swap 1 yearDAS-B-3YSBD 3 Year Same Business Day ( 9 x 5 x 4) Swap 3 yearsDAS-B-3YNBD 3 Year Next Business Day Swap Service 3 yearsDDAS-B-1YNBD 1 Year Next Business Day Swap Service 1 yearDAS-B-3YWTY 3 Year Warranty Extension 3 yearsIP Surveillance Firewalls Wireless Switching Other DCS-3415DFL-1600DEM-422XT DES-7206-BASEDCS-6815DFL-1660DES-3828P DES-7210-BASEDCS-6818DFL-2560DES-3852DGS-3100-48PDFL-2560G DES-7200-1200AC DGS-3200-24DES-7200-2000AC DGS-3324SRIDES-7200-1200DC DGS-3426PDES-7200-2000DC DGS-3427DES-7200-24DGS-3450DES-7200-24G DGS-3612G DES-7200-24GE DGS-3627 DES-7200-24P DGS-3627G DES-7200-2XG DGS-3650 DES-7200-48DSN-1100-10 DES-7200-4XG DSN-2100-10 DES-7200-512RAM DSN-3200-10 DES-7200-ASE3DSN-3400-10 DES-7200-CM1DWS-3024 DES-7200-CM2DWS-3024L DES-7200-CM3DWS-4026 DES-7200-CM4AExtended WarrantySilverGoldBronzeDAS-A-1Y247 1 Year 24 x 7 x 4 Swap Service 1 yearDAS-A-3Y247 3 Year 24 x 7 x 4 Swap Service 3 yearsDAS-A-1YSBD 1 Year Same Business Day ( 9 x 5 x 4) Swap 1 yearDAS-A-3YSBD 3 Year Same Business Day ( 9 x 5 x 4) Swap 3 yearsDAS-A-1YNBD 1 Year Next Business Day Swap Service 1 yearDAS-A-3YNBD 3 Year Next Business Day Swap Service 3 yearsDAS-A-3YWTY 3 Year Warranty Extension 3 yearsD-Link Assist Product Reference Guide Rapid Response Support Product Codes Service Level Order Number Description of D-Link Assist Service PeriodService Category。
TJA1053中文资料
TJA1053
RXD NERR STB EN WAKE
3 4 5 6 7
INH TXD RXD NERR STB EN WAKE
1 2 3 4 5 6 7
MGL182
14 BAT 13 GND 12 CANL
TJA1053T 11 CANH
10 VCC 9 8 RTL RTH
元器件交易网
INTEGRATED CIRCUITS
DATA SHEET
TJA1053 Fault-tolerant CAN transceiver
Preliminary specification File under Integrated Circuits, IC18 1997 Oct 15
RTH
8
RTL
9
VCC CANH CANL GND BAT
10 11 12 13 14
1997 Oct 15
4
元器件交易网
Philips Semiconductors
Preliminary specification
Fault-tolerant CAN transceiver
TJA1053
VERSION SOT108-1
handbook, full pagewidth
BAT 14
VCC 10 12.5 kΩ
INH WAKE STB EN
1 7 5 6 VCC 2 DRIVER TIMER WAKE-UP STANDBY CONTROL TEMPERATURE PROTECTION
元器件交易网
Philips Semiconductors
Preliminary specification
聚四氟压力表垫型号
237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268
269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292
刘涛
2012.5.8 王时睿
2012.5.8 刘涛
低温低压用 高温高压用 铠装温度计用 铠装温度计用 变送器用 双金属温度表用 双金属温度表用 双金属温度表用
办人：
办人：
生技部：
负责人：
经办人：
92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107
108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
表
2012年 05月 01日
备注
紧急计划
月计划
紧急计划 紧急计划 月计划 锅炉定排电动门 锅炉定排电动门 #1吸收塔pH1 #11脱硫系统#1-A石膏排出泵出口PH
钢灰库提升机
时间 2012.5.8 2012.5.8
申报人
王时睿
2012.5.2
2012.5.2 2012.5.2 2012.5.2
21
聚四氟垫
22
聚四氟垫
24
Motorola 3.5 kHz 产品说明书
RVN4126 3.59100-386-9100-386/T DEVICERVN41772-CD2-3.5MCS/MTSRVN41821-CD2-3.5XTS3000/SABER PORTABLE YES RKN4046KHVN9085 3.51-20 R NO HLN9359 PROG. STAND RVN4057 3.532 X 8 CODEPLUG NO3080385B23 & 5880385B30 MDVN4965 3.59100-WS/T CONFIG KITRVN4053 3.5ASTRO DIGITAL INTERFACE NO3080385B23RVN41842-CD RKN4046A (Portable) 2-3.5ASTRO PORTABLE /MOBILE YES3080369B73 or0180300B10 (Mobile) RVN41831-CD3080369B732-3.5ASTRO SPECTRA MOBILE YES(Low / Mid Power)0180300B10 (High Power) RVN4185CD ASTRO SPECTRA PLUS MOBILE NO MANY OPTIONS; SEESERVICE BRIEF#SB-MO-0101RVN4186CD ASTRO SPECTRA PLUS MANY OPTIONS;MOBILE/PORTABLE COMB SEE SERVICE BRIEF#SB-MO-0101RVN4154 3.5ASTROTAC 3000 COMPAR.3080385B23RVN5003 3.5ASTROTAC COMPARATORS NO3080399E31 Adpt.5880385B34RVN4083 3.5BSC II NO FKN5836ARVN4171 3.5C200RVN4029 3.5CENTRACOM SERIES II NO VARIOUS-SEE MANUAL6881121E49RVN4112 3.5COMMAND PLUS NORVN4149 3.5COMTEGRA YES3082056X02HVN6053CD CT250, 450, 450LS YES AAPMKN4004RVN4079 3.5DESKTRAC CONVENTIONAL YES3080070N01RVN4093 3.5DESKTRAC TRUNKED YES3080070N01RVN4091 3.5DGT 9000 DESKSET YES0180358A22RVN4114 3.5GLOBAL POSITIONING SYS.NO RKN4021AHVN8177 3.5GM/GR300/GR500/GR400M10/M120/130YES3080070N01RVN4159 3.5GP60 SERIES YES PMLN4074AHVN9128 3.5GP300 & GP350RVN4152 3.5GP350 AVSRVN4150 3.5GTX YES HKN9857 (Portable)3080070N01(Mobile) HVN9025CD HT CDM/MTX/EX SERIES YES AARKN4083/AARKN4081RiblessAARKN4075RIBLESS NON-USA RKN4074RVN4098H 3.5HT1000/JT1000-VISAR YES3080371E46(VISAR CONV)RVN4151 3.5HT1000 AVSRVN4098 3.5HT1000/ VISAR CONV’L.YES RKN4035B (HT1000) HVN9084 3.5i750YES HLN-9102ARVN4156 3.5LCS/LTS 2000YES HKN9857(Portable)3080070N01(Mobile) RVN4087 3.5LORAN C LOC. RECV’R.NO RKN4021ARVN4135 3.5M100/M200,M110,M400,R100 includesHVN9173,9177,9646,9774YES3080070N01RVN4023 3.5MARATRAC YES3080070N01RVN4019 3.5MAXTRAC CONVENTIONAL YES3080070N01RVN4139 3.5MAXTRAC LS YES3080070N01RVN4043 3.5MAXTRAC TRK DUPLEX YES3080070N01RVN4178CD MC SERIES, MC2000/2500DDN6124AW/DB25 CONNECTORDDN6367AW/DB9 CONNECTOR RVN41751-CD Rib to MIC connector 1-3.5MCS2000 RKN4062BRVN41131-3.5MCS2000RVN4011 3.5MCX1000YES3000056M01RVN4063 3.5MCX1000 MARINE YES3000056M01RVN4117 3.5MDC/RDLAP DEVICESRVN4105 3.5MOBILE PROG. TOOLRVN4119 3.5MOBITEX DEVICESRVN4128 3.5MPT1327-1200 SERIES YES SEE MANUALRVN4025 3.5MSF5000/PURC/ANALOG YES0180355A30RVN4077 3.5MSF5000/10000FLD YES0180355A30RVN4017K 3.5MT 1000YES RTK4205CRVN4148 3.5MTR 2000YES3082056X02RVN4140 3.5MTRI 2000NORVN41761-CD MTS2000, MT2000*, MTX8000, MTX90001-3.5*programmed by DOS which is included in the RVN4176RVN4131 3.5MTVA CODE PLUG FIXRVN4142 3.5MTVA DOCTOR YES3080070N01RVN4131 3.5MTVA3.EXERVN4013 3.5MTX800 & MTX800S YES RTK4205CRVN4097 1-CD MTX8000/MTX9000,MTS2000,MT2000*,* programmed by DOS which is included in the RVN4176HVN9067CD MTX850/MTX8250MTX950,MTX925RVN4138 3.5MTX-LS YES RKN4035DRVN4035 3.5MX 1000YES RTK4203CRVN4073 3.5MX 800YES RKN4006BHVN9395 P100, P200 LB, P50+, P210, P500, PR3000RVN4134 3.5P100 (HVN9175)P200 LB (HVN9794)P50+ (HVN9395)P210 (HVN9763)P500 (HVN9941)PR3000 (HVN9586)YES RTK4205HVN9852 3.5P110YES HKN9755A/REX1143 HVN9262 3.5P200 UHF/VHF YES RTK4205RVN4129 3.5PDT220YVN4051 3.5PORTABLE REPEATER Portable rptr.P1820/P1821AXRVN4061C 3.5PP 1000/500NO3080385B23 & 5880385B30 RVN5002 3.5QUANTAR/QUANTRO NO3O80369E31RVN4135 3.5R100 (HVN9177)M100/M200/M110/M400YES0180358A52RVN4146 3.5RPM500/660RVN4002 3.5SABER YES RTK4203CRVN4131 3.5SETTLET.EXEHVN9007 3.5SM50 & SM120YESRVN4039 3.5SMART STATUS YES FKN5825AHVN9054 3.5SOFTWARE R03.2 P1225YES3080070N01HVN9001 3.5SOFTWARE R05.00.00 1225LS YES HLN9359AHVN9012 3.5SP50RVN4001N 3.5SPECTRA YES3080369B73 (STANDARD)0180300B10 (HIGH POWER) RVN4099 3.5SPECTRA RAILROAD YES3080369B73RVN4110 3.5STATION ACCESS MODULE NO3080369E31RVN4089A 3.5STX TRANSIT YES0180357A54RVN4051 3.5SYSTEMS SABER YES RTK4203BRVN4075 3.5T5600/T5620 SERIES NO3080385B23HVN9060CD TC3000, TS3000, TR3000RVN4123 3.5VISAR PRIVACY PLUS YES3080371E46FVN4333 3.5VRM 100 TOOLBOX FKN4486A CABLE &ADAPTORRVN4133 3.5VRM 500/600/650/850NORVN4181CD XTS 2500/5000 PORTABLES RKN4105A/RKN4106A RVN41002- 3.5XTS3000 ASTRO PORTABLE/MOBILERVN4170 3.5XTS3500YES RKN4035DRIB SET UPRLN4008E RADIO INTERFACE BOX (RIB)0180357A57RIB AC POWER PACK 120V0180358A56RIB AC POWER PACK 220V3080369B71IBM TO RIB CABLE (25 PIN) (USE WITH XT & PS2)3080369B72IBM TO RIB CABLE (9 PIN)RLN443825 PIN (F) TO 9 PIN (M) ADAPTOR (USE W/3080369B72 FOR AT APPLICATION) 5880385B308 PIN MODULAR TO 25 PIN ”D” ADAPTOR (FOR T5600 ONLY)0180359A29DUPLEX ADAPTOR (MOSTAR/TRAXAR TRNK’D ONLY)Item Disk Radio RIB Cable Number Size Product Required Number Item Disk Radio RIB Cable Number Size Product Required NumberUtilizing your personal computer, Radio Service Software (RSS)/Customer Programming Software (CPS)/CustomerConfiguration Software (CCS) enables you to add or reprogram features/parameters as your requirements change. RSS/CPS/CCS is compatible with IBM XT, AT, PS/2 models 30, 50, 60 and 80.Requires 640K RAM. DOS 3.1 or later. Consult the RSS users guide for the computer configuration and DOS requirements. (ForHT1000, MT/MTS2000, MTX838/8000/9000, Visar and some newer products —IBM model 386, 4 MEG RAM and DOS 5.0 or higher are recommended.) A Radio Interface Box (RIB) may be required as well as the appropriate cables. The RIB and cables must be ordered separately.Licensing:A license is required before a software (RVN) order is placed. The software license is site specific (customer number and ultimate destination tag). All sites/locations must purchase their own software.Be sure to place subsequent orders using the original customer number and ship-to-tag or other licensed sites; ordering software without a licensed customer number and ultimate tag may result in unnecessary delays. To obtain a no charge license agreement kit, order RPX4719. To place an order in the U.S. call 1-800-422-4210. Outside the U.S., FAX 847-576-3023.Subscription Program:The purchase of Radio ServiceSoftware/Customer Programming/Customer ConfigurationSoftware (RVN & HVN kits) entitles the buyer/subscriber to three years of free upgrades. At the end of these three years, the sub-scriber must purchase the same Radio Service Software kit to receive an additional three years of free upgrades. If the sub-scriber does not elect to purchase the same Radio Service Software kit, no upgrades will be sent. Annually a subscription status report is mailed to inform subscribers of the RSS/CPS/CCS items on our database and their expiration dates.Notes:1)A subscription service is offered on “RVN”-Radio Service Software/Customer Programming/Customer Configuration Software kits only.2)“RVN” software must only be procured through Radio Products and Services Division (RPSD). Software not procured through the RPSD will not be recorded on the subscription database; upgrades will not be mailed.3)Upgrades are mailed to the original buyer (customer number & ultimate tag).4)SP software is available through the radio product groups.The Motorola General Radio Service Software Agreement is now available on Motorola Online. If you need assistance please feel free to submit a “Contact Us” or call 800-422-4210.SMART RIB SET UPRLN1015D SMART RIB0180302E27 AC POWER PACK 120V 2580373E86 AC POWER PACK 220V3080390B49SMARTRIB CABLE (9 PIN (F) TO 9 PIN (M) (USE WITH AT)3080390B48SMARTRIB CABLE (25 PIN (F) TO 9 PIN (M) (USE WITH XT)RLN4488ASMART RIB BATTERY PACKWIRELESS DATA GROUP PRODUTS SOFTWARERVN4126 3.59100-386/9100T DEVICES MDVN4965 3.59100-WS/T CONFIG’TN RVN41173.5MDC/RDLAP DEVICESPAGING PRODUCTS MANUALS6881011B54 3.5ADVISOR6881029B90 3.5ADVISOR ELITE 6881023B20 3.5ADVISOR GOLD 6881020B35 3.5ADVISOR PRO FLX 6881032B30 3.5BR8506881032B30 3.5LS3506881032B30 3.5LS5506881032B30 3.5LS7506881033B10 3.5LS9506881035B20 3.5MINITOR III8262947A15 3.5PAGEWRITER 20008262947A15 3.5PAGEWRITER 2000X 6881028B10 3.5TALKABOUT T3406881029B35 3.5TIMEPORT P7308262947A15 3.5TIMEPORT P930NLN3548BUNIVERSAL INTERFACE KITItem Disk Radio NumberSize Product。
电源保护器数据手册说明书
Electrostatic Discharged Protection Devices (ESD) Data SheetDescriptionUDT26A05L05 is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive components which is connected to data and transmission lines from overvoltage caused by electrostatic discharge (ESD), electrical fast transients (EFT), and lightning.The unique design of the device incorporates one surge rated, and four data lines. Low capacitance steering diodes and a TVS diode in a single package. The low capacitance array configuration allows the user to protect four high speed data or transmission lines.Features● IEC61000-4-2 ESD 15KV Air, 8KV contact compliance ● SOT23-6L surface mount package● Protects four high-speed data lines and one power line ● Array of surge rated, low capacitance diodes ● Working voltage: 5V ● Low leakage current ● Low clamping voltage ● Solid-state silicon avalanche technology ● Lead Free/RoHS compliant● Solder reflow temperature: Pure Tin-Sn, 260~270℃ ● Flammability rating UL 94V-0● Meets MSL level 1, per J-STD-020 ● Marking: B 05B or 054Applications● USB power and data line protection ● 10/100/1000 Ethernet ● Video line protection ● I 2C bus protection● WAN/LAN equipment ● ISDN S/T interface● Microcontroller input protection ● Portable electronicsMaximum RatingsRatingSymbolValue UnitESD voltage (Contact discharge) V ESD ±8kVESD voltage (Air discharge)±15Storage & operating temperature rangeT STG ,T J -55~+150℃Pin ConfigurationElectrical Characteristics (T J=25℃)Parameter Symbol Condition Min. Typ. Max. UnitReverse stand-off voltage V RWM 5V Reverse breakdown voltage V BR I BR=1mA 6 V Reverse leakage current I R V R=5V 5 μAClamping voltage (tp=8/20μs) V C I PP=1A 9.8V Clamping voltage (tp=8/20μs) V C I PP=2A 16VOff state junction capacitance C J 0Vdc,f=1MHzBetween I/Opins and GND2.5 pFApplications InformationESD Protection StandardsIEC61000-4-2Interfaces of consumer electronic equipment are widely specified according to the International Electrotechnical Commission standard IEC61000-4-2. This standard is not targeted towards particular devices but towards general equipment, systems and subsystems that may be involved in electrostatic discharge. consists of a 150pF capacitor and a 330Ω series resistor representing the counterpart to the Device Under Test (DUT).Human Body Model (HBM, MIL-883E method 3015.7)The HBM standard simulates an ESD surge generated by human contact to electronic components.Recommended Soldering ConditionsRecommended ConditionsProfile Feature Pb-Free Assembly Average ramp-up rate (T L to T P) 3℃/second max.Preheat-Temperature Min (T S min) -Temperature Max (T S max) -Time (min to max) (ts)150℃200℃60-180 secondsT S max to T-Ramp-up 3℃/second max.Time maintained above:-Temperature (T-Time (t60-150 seconds Peak Temperature (T P) 260Time within 5 of actual Peak Temperature (t) 20-40 Ramp-down RateTime 25 to Peak TemperatureDimensions (SOT23-6L)Packaging Reel。
驻波管技术文档
日期 2004.5.26 2005.12.19 2006.3.1
摘要 初始版本 基于传递函数的吸声隔声测量方法与应用研究 KD 系列阻抗管原理及技术参数细节
作者 邢优胜 邢优胜 邢优胜
文件相关 [1] GB/T18696.2 – 2002 [2] ISO 10534-2：1998 [3] GB/T-18696.1-2004 关键词：吸声；隔声；传递函数法；虚拟仪器；LabVIEW
地址：北京市上地东里上地佳园 14-3-B001
2
电话：010-82899450 82899451 82899249
传真：010-82899450-825
网址：
1 前言
北京中科君达科技有限公司
BEIJING ZHONGKE JUNDA HI-TECH CO.,LTD
地址：北京市上地东里上地佳园 14-3-B001
1
电话：010-82899450 82899451 82899249
传真：010-82899450-825
网址：
北京中科君达科技有限公司
BEIJING ZHONGKE JUNDA HI-TECH CO.,LTD
目录
1 前言······························································································································································3 2 背景简介·······················································································································································3 3 KD 吸声系数测量系统·································································································································4
GRR实例
第2次 0.0000 0.0000 0.0010 0.0020 0.0040 0.0010 0.0010 0.0010 0.0020 0.0000 0.012
=(AV2+EV2)1/2
R&R% =
R&R/T =
審核:
經辦: 田中莉
005全距第1次第2次第3次123第1次第2次第3次全距000000000000000000000020000100001000010001000010000000000000000000000100001000010000000010000200002000020000200001000000001000010000100000000100002000020000000010002000020000200000000100001000020000100000000100001000010000000001000300004000040000100020000200002000000002000000001000010000100000000200000000010000200010000000000000020000200001000100001000010000000010000100001000000000000010001000010000200001000200002000020000000030000200002000010000100001000200002000020000000000000100001000010001000010000000000000000000000100001000000000100000000000001000000000100001001000120013000300003001200110013000800090011001200090000800009xc00011r000067uclr00017xa00012xb00012量測系統很好
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
标准化标准化-8
如何定义标准操作？ 如何定义标准操作？
目的： 目的：以书面形式收集技术和过程技能，使每个人都能更轻松地完成工 作。 内容： 内容： 应该以通俗易懂的语言编写，甚至连没有经过全面培训的工人也可轻 松使用它们 针对该项工作，以适当的详细程度编写 描述如何防止变化 提供清楚的说明 考虑优先次序
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-3
核心原则
没有什么事情会可靠地、持续地发生，除非我们建立一个系统， 没有什么事情会可靠地、持续地发生，除非我们建立一个系统，促使它可 靠地、持续地发生。 靠地、持续地发生。 标准化是允许可靠地、持续不变地产生高质量的方法。 标准化是允许可靠地、持续不变地产生高质量的方法。
标准化标准化-7
标准化 = 标准操作和程序
标准操作是… 标准操作是 -“一种工作方法的定义，这种方法的所有变量都有详细规定。” 一种工作方法的定义，这种方法的所有变量都有详细规定。 - 它是工作人员与公司之间就如何完成该工作的一个书面协议。 它是工作人员与公司之间就如何完成该工作的一个书面协议。
北京扬智嘉信管理技术有限公司版权所有
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-2
目标
了解标准方法的价值。 了解标准方法的价值。
了解归档的作用／用途。 了解归档的作用／用途。
您可以使用提供的方法制定标准。 您可以使用提供的方法制定标准。
您已经确定在项目中何处应使用标准化，并已开始准备标准文档。 您已经确定在项目中何处应使用标准化，并已开始准备标准文档。
标准化标准化-12
使用标准操作工作表
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-13
练习： 练习：制定程序
目的： 目的：练习建立一个程序，以概述完成特定任务所需的步骤。 指示： 指示：分成小组工作。管理阶层要求您的小组为制造纸飞机制 定一个标准操作程序，这些纸飞机将用于培训新员工。准备在 课堂上展示您的程序和样机。 时间： 时间：30 分钟
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-4
标准化
– 确保过程的各重要元素以最可能的一贯方式执行 – 仅当数据显示新的替代方法更好时才进行更改 – 归档是关键 • 确保归档的资料最新且经过使用可鼓励大家继续使用 使用标准化方法 使用 – 讨论 • 当您思考过程标准化时会想到什么？
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-5
标准化的好处
标准化有助于我们在市场中更具竞争力，它提供以下好处： – 增加可靠性 – 降低成本 – 提高员工业绩 – 提高安全性 – 过程仍受控制 – 连续改进 – 有弹性的做法对客户的需求可快速回应
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-6
制定标准操作和程序
北京扬智嘉信管理技术有限公司版权所有
标准化和归档
北京扬智嘉信管理技术有限公司ine
Step 13- 制定控制计划
Measure Analyze
对改善结果的风险性评价 控制计划 防错法 标准化
Step 14- 实 控 计划 14
Improve
Step 15- 文件化/共享 15 文件化/
打开热水、只转动 1/2 转
以适合您情况的详细程度定义。影响产品的质量、成本或交货的措施应标准化。
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-10
标准操作的用途
1. 减少个体或组中的变化（使过程输出变得更加可预测） 2. 为目前参与该工作的操作员和经理提供基本原理 3. 为培训新人提供基础 4. 提供跟踪日志用于跟踪问题 5. 提供一种方法以获取并保留知识 6. 对不正常情况给出指导
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-11
建立标准操作和程序
1. 描述该程序 的工作环境
2. 收集表述 该程序的文档
3. 将归档的程序与 实际程序比较
4. 使实际操作与 归档程序一致
5. 计划使用归档的 标准程序
6. 使用标准程序
7. 检查标准程序的 使用
北京扬智嘉信管理技术有限公司版权所有
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-9
详细程度如何？ 详细程度如何？
准备工作
概括性
起床
洗漱
穿衣
吃饭
驾车上班
增加一些细节
起床
淋浴
吹风和 梳头
挑选 衣服
穿上 衣服
穿上 鞋子
挑选手表/ 挑选手表 珠宝
非常详细
将左脚转向床 左侧的地面
将右脚与左脚 并拢
伸直膝盖、 起立
走向浴室
检查毛巾、 香皂和洗发香波
标准化标准化-15
培训
当您完成归档后，必须确保使用同一过程的每个人都接受了新方法的培训。
甚至经验丰富的员工也必须接受新方法的培训。
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-16
培训计划
不要尝试制定一次培训就可以教授人们需要知道的有关该工作的全部知识。 重点放在该工作最重要的方面。 当更改一个过程时，解释更改背后的原因，人们为了更改的缘故抗拒更 改。 提供初期培训与业绩支持。 不要期望每个人一次学会全部东西；提供工作上的帮助。 记住大多数知识都是从工作中获得的。
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-17
归档和培训： 归档和培训：复习
– 标准化使我们可以维持利润。
– 标准操作的归档是实施和监控的基础。
– 培训确保所有过程用户以同样的方式执行关键任务。
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-18
北京扬智嘉信管理技术有限公司版权所有
标准化标准化-14
流程图
流程图是标准操作中使用的一种关键类型的文档。 到达这一步时，您应该已有几个流程图： • 在测量中建立的流程图，用于描述当前情况。 • 在创新改进中建立的流程图，用于描述解决方案。 现在，您只要确定在改进中的流程图是完整和最新的。
北京扬智嘉信管理技术有限公司版权所有