70-210试题(二)_微软认证模拟题库(1)-微软认证试题
70219考题中文翻译版(二)_微软认证模拟题库(1)-微软认证试题
70219考题中文翻译版（二）_微软认证模拟题库(1)-微软认证试题位于丹佛，圣地亚哥，旧金山和西雅图的研究基地原来是被命名为帕内尔航空和宇宙航行空间的公司，本来和总公司没有关联。
当他们（帕内尔航空和宇宙航行空间公司）在1997年被收购的时候，这些研究基地成为Contoso Research公司的一部分。
这些研究基地还使用“帕内尔航空和宇宙航行空间公司”的名字，并且，帕内尔航空和宇宙航行空间如同与总公司没有联系的公司那样，还维持其同一性。
Contoso Research有可能在不远的将来收购另一个公司。
问题陈述：首席业务领导人（CEO）：因为我们主要解决各种分类的工程的军事的调查。
所以，我们主要的关心是安全。
我们在1997年购买了帕内尔航空和宇宙航行空间，但是，在很多方面它象没有联系的公司那样运作着。
我们试图在公司的范围内尽可能地减少重复的工作。
另外，我们在发展共同操作的实践。
为了分享调查结果，我们允许政府和军队顾客访问一些我们的数据。
当我们收购帕内尔航空和宇宙航行空间的时候，我们需要重新构建我们整个网络安全结构。
我们要是现在的网络架构能够跟上我们发展的计划，而不需要再一次的重组。
信息采编者主要的（CIO）：在一些情况下，为了避免更换目前使用的硬件，我们将使用其他的操作系统而不是视窗2000。
我们想得到整合的目录服务，而不是一个以上的目录服务为了完成这项工作，我们将把exchange 5.5移植到exchange 2000服务器上。
当前，全部账户管理都必须在IT中心进行。
我们想除掉这一限制。
我们同样希望我们的账户数据库在达到40mb时，不需要下部基础构建进行重构。
目前我们（域之间）的信赖关系管理是笨重的。
现在的Windows NT 4.0域结构有好几个域需要进行授权管理。
我们想使用全局共同的软件设备，标准，程序。
这一合并将在windows 2000升级期间里开始，但是，我们不打算在升级期间里完成它。
微软认证70-210模拟试卷1(题后含答案及解析)
微软认证70-210模拟试卷1(题后含答案及解析) 题型有：1. 单选题 2. 多选题单选题1．You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.What should you do?A．Configure the DHCP scope to add additional IP addresses.B．Run Rbfg.exe from the RemoteInstall\Admin folder on the RIS server.C．Modify the startup sequence in the CMOS of the remaining computers.D．Create computer accounts on the remaining computers in the Active Directory.正确答案：A解析：Explanation: RIS requires Active Directory, DNS and DHCP. The clients can either be PXE-compliant or they can use a Remote boot diskette. In this scenario, the DHCP server has run out of IP-addresses. By extending the scope by 40 IP addresses the installation on the remaining computers will be successful.Incorrect Answers:B: Rbfg.exe is used to create Remote Boot disks for computers that do not have PXE-compliant network cards. In this scenario, all clients are PXE-compliant and will thus be able to boot through the network and access the RIS image. It is thus not necessary to create Remote Boot disks.C: The 50 new computers have identical hardware. There installation worked on 10 of the new computers. There can thus be no incorrect startup sequence setting in CMOS.D: In this situation there is no need for prestaged computer accounts in Active Directory. Pre-staged computer accounts are used to select between RIS servers. By configuring the RIS server to answer only known client computers it would require user accounts for all RIS clients. This is not the default setting.2．You configure your Windows 2000 Professional computer for Internet Connection Sharing and for TCP/IP filtering as shown in the exhibit.You test your TCP/IP filtering configuration from another client computer. You can access web sites, but you cannot access FTP sites.What should you do to be able to access FTP sites?A．Add Port 21 to the TCP Ports section.B．Add Port 138 to the TCP Ports section.C．Add Port 21 to the IP Ports section.D．Add Port 138 to the IP Ports section.正确答案：A解析：Explanation: The FTP protocol uses the TCP port 21. In the exhibit the UDP port 21 has been incorrectly added instead of the TCP port.Incorrect answers:B: The FTP protocol uses Port 21 not Port 138.C: The port 21 should be added as a TCP port 21, not as a UDP port or as an IP protocol. IP is also a network protocol and not a port.D: The FTP protocol uses TCP port 21 not port 138. IP is also a network protocol and not a port.3．As a Ezonexam employee you are the desktop administrator of a Windows 2000 Professional computer.The Windows 2000 Professional computer has 25 MB of free disk space drive C and 800 MB of free disks pace on drive E. You are unable to print large documents because if inadequate disk space on drive C.You want to be able to use the space on drive E to print large documents.What should you do?A．From the Printer Properties dialog box, change the location field to E:\Winnt\System32\Spool\Printers.B．From the Print Server Properties dialog box, change the location of the spool folder to any existing file path on drive E.C．Copy the C:\Winnt\System32\Spool\Printers folder to the E:\Winnt\System32\Spool\Printers folder.D．Mount drive C as a subdirectory on drive E.正确答案：B解析：Explanation: When one is unable to print large documents then the hard disk space is insufficient for spooling. To remedy the situation you should create more free space on the hard disk. Since the question mentions that Drive C has 25 MB of free disk space and Disk E has 800 MB of free disk space, and there is an inability to print large documents due to inadequate disk space on Drive C, then it would be logical to change the location of the spool folder to any existing file path on Drive E if one wants to be able to print large documents.Incorrect answers:A: The Printer Properties dialog box is not the appropriate location from which to change the location of the spool folder.C: This procedure is not how one changes the location of the spool folder.D: There is no need to mount Drive C as a subdirectory on Drive E. Drive C will still have inadequate free disk space.多选题4．You are the network administrator for . Your network has 210 Windows 2000 Professional computers and eleven Windows 2000 Server computers. Users on the network save their work files in home folders on a network server. The NTFS partition that contains the home folders has Encrypting File System (EFS) enabled. A user named Sandra leaves . You decrypt the files for hermanager. When the manager attempts to open any of the files, he receives the following error message: “Access is denied.”You want the manager to be able to access the files.What should do? (Each correct answer presents a complete solution. Choose two.)A．Move the files from Sandra’s folder to the manager’s folder.B．Grant the manager NTFSFull Controlpermission to the files.C．Run theciphercommand to create a new file encryption key for the manager.D．Run theciphercommand to generate an EFS recovery agent key and certificate.E．Grant the manager NTFSList Folder Contentspermissions to the folder containing Sandra’s files.正确答案：A,B解析：Explanation:A: When a new file is created it inherits the permissions from its parent. A Move operation creates a new version of the resource you are moving if you are moving the resource to a different partition-for this reason, permissions of the parent are inherited. A Move operation does not create a new version of the resource if you are moving the resource to a different location on the same partition-for this reason, existing permissions are moved along with the resource.B: The NTFS Full Control permission allows a user to change permissions, take ownership, delete subfolders and files, and perform the actions granted by all other permissions.Incorrect answers:C, D: The Cipher utility allows you to encrypt files and folders as well as check the encryption statistics. However, this does not guarantee the manager access to the files because the files have been decrypted already and access was still denied.E: The NTFS List Folder Contents permission allows a user to see the names of files and subfolders in the folder. This is not the same as granting access.5．You are preparing to install Windows 2000 Professional on 75 new computers. You want to create a standard installation image to use on all the new computers. The computers have several different configurations of hard disks and hardware components.You install Windows 2000 Professional and other standard software on one of the computers. You log on to the computer using the local Administrator account. You configure the standard applications and customize the desktop settings you intend to deploy.You run the Setup Manager and create a Sysprep.inf file. You copy Sysprep.exe and Setupcl.exe to the C:\Sysprep folder. You run Sysprep.exe and run your third party disk imaging software.You copy the image to the several test computers and restart the computers. When the installation is complete, you find that some of the computers do not function at all. You also find that the desktop settings do not appear as you have configured them on the original computer.You want to correct the imaging process and ensure that all computers have the same standard desktop.What should you do? (Choose two)A．Copy Sysprep.inf to C:\Sysprep folder.B．Copy the Administrator profile to the Default User profile, and then grant permissions to the Everyone group to use the profile.C．Include the-pnpparameter for Sysprep.exe when you rerun that utility.D．Include the-nosidgenparameter for Sysprep.exe when you rerun that utility.正确答案：B,C解析：Explanation:B: A user profile is automatically created and maintains the desktop configuration for each user’s desktop on the local Windows 2000 computer. This user profile is created when the user logs on to a computer for the first time. An administrator profile, which maintains the administrators desktop configuration is created during the Windows 2000 Professional installation. In this scenario the administrator profile must be copied and used as the Default User profile, which is applied to all users. As all users are automatically placed in the Everyone user group, the Everyone user group must be granted permission to access this profile.C: Because the computers that Windows 2000 Professional will be installed onto have different hardware configurations a full plug and play detection must be done during the installation process. This can be accomplished by including the -pnp parameter to the sysprep.exe utility, as this parameter causes the plug and play detection utility to be used.Incorrect answers:A: When the installation is complete, you find that some of the computers do not function at all and that the desktop settings do not appear as they have been configured on the original computer. This indicates that the sysprep installation was successful. Therefore the sysprep.inf file must have already been in the C:\Sysprep folder (as is the default when using setupmgr.exe to create the file).D: The -nosidgen is only used on the initial computer where the clone image was made. It instructs the installation program not to generate the system information that is unique to each installation of Windows 2000 Professional. This parameter is not used here during the installation of Windows 2000 Professional on the target computers. It is therefore not relevant to this scenario.。
微软认证模拟试题
微软认证考试：企业技术篇（1）Windows NT Server 4.0 in EnterpriseSingle** Mutiple1. You transfer all of the user accounts,and files from a NetWareserver to Windows NT Server computer. You want all computers that previously were able to access the NetWare server to be able to access the Windows NT Server computer. What must you do?A. Install a Microsoft redirector on each client computer.B. Install Client Server for NetWare on each client computer.C. Install FTP server software on the Windows NT Server computer.D. Install Gateway(and client) Services for NetWare on the Windows NTServer computer.A2. you TCP/IP network has two subnets. You install a Windows NT Server computer that will function as a router connecting the two subnets.You want DHCP client computers on one suubnet to be able to access a DHCP server on the other subnet.Which additional service must you install on the Windows NT Server computer?A. SAP AgentB. DHCP Relay AgentC. RIP for inte rnet ProtocolD. RIP for NWLink IPX/SPX Compatible TranspoortB3. Your organization provides World Wide Web Services for 10 different companies. Each company has a registered domain name. You want to creat a seperate Web site for each company on a single Windows NT Server computer that has Microsoft internet information Server installed.What should you do to accomplish this ?(Choose two.)A. Assign multiple IP addresses to the Windows NT Serveer computer s network adapter.B. Assign the same IP address to each company s domain name on a DNS server.C. Assign a separate IP address to each company s WWW folder.D. Use WINS to Assign an IP address to a NetBOIS computer name. Map the computer name to each company s WWW folder.A C4. Situation:You company has a Windows NT Server network. The brokers at your firm each have laptop computers with Windows NT Workstation installed.You are developing a solution to improve network security.Required results:Allow the brokers at& nbsp;your firm remote access to the network from anylocation.Prevent all user accounts other than the brokers user accounts from remotely accessing the network.Optional desired results:Implement a method to protect passwords while they are transmitted.Implement a method to protect the data while it s being transmitted.Proposed solution:Require passwords with a minimum length of eight characters for all users, and force passwords to be changed every 40 days.Install RAS on one of the Windows NT Server computers on the network.Configure RAS security to allow only the brokers to dail remotely and to allow any authentication method.Install a hardware-based security host between the RAS server and the modems.Which results does the proposed solution produce?A. the proposed solution produces the required results and produces both of optional desired results.B. the proposed solution produces the required results and produces only one of optional desired results.C. the& proposed solution produces the required results but does not produce either of optional desired results.D. the proposed solution does not produce the required results.C5. Situation:You company has a Windows NT Server network. The brokers at your firm each have laptop computers with Windows NT Workstation installed.You are developing a solution to improve network security.Required results:Allow the brokers at your firm remote access to the network from any location.Prevent all user accounts other than the brokers user accounts from remotely accessing the network.Optional desired results:Implement a method to protect passwords while they are transmitted.Implement a method to protect the date while it s being transmitted.Proposed solution:Require passwords with a minimum length of eight characters for all users, and force passwords to be changed every 40 days.Install RAS on one of the Windows NT Server computers on the network.Configure RAS security to allow&n only the brokers to dail remotely to require Microsoft encrypted authentication,and to require data encryption.Configure RAS callback security to use a user-defined telephone number.Which results does the proposed solution produce?A. the proposed solution produces the required results and produces both of optional desired results.B. the proposed solution produces the required results and produces only one of optional desired results.C. the proposed solution produces the required results but does not produce either of optional desired results.D. the proposed solution does not produce the required results.D6. Situation:you receive reports from users of client computers in London that logon attempts and boot times are every slow ,and that browsing the network is unacceptably slow. Users of client computers in Mexico City do not report any problems with network performance.Required result:Increase the network performance in London to the same levels as in Mexico City.Optional desired r esults:Reduce WINS traffic over the 56-Kbps link.Reduce DHCP traffic over the 56-Kbps link.Maintain the same level of name resolution services while minimizing replication traffic over the 56-Kbps link.Reduce logon validation traffic over the 56-Kbps link.Proposed solution:Reinstall the Windows NT Server in London as a BDC.Add WINS and DHCP to the Windows NT Server computer in London.Configure all client computers in London to use the London WINS server.Configure the replicationGovernor registry entry on the BDC to 25 percent.Configure the two WINS servers as pull partners only.Which rsults does the proposed solution produce?A. the proposed solution produces the required results and produces all of the optional desired results.B. the proposed solution produces the required results and produces two of the optional desired results.C. the proposed solution produces the required results but does not produce any of the optional desired results.D. the proposed solution does not produce the required results.A7. Users report slow reponse times from one of the servers on your Windows NT Server network. This server acts as a file-and-print server. You suspect very high utilization on one of the disk drives.Which action providers the most information for determining which disk partition has the highest utilization?A.In Performance Monitor,view the LogicalDisk object.B.In Performance Monitor,view the Paging File object.C.In Performance Monitor,view the Servercounter for the Thread object.e the Diskperf utility to analyze the activity occurring on a per-file basis.A8. You receive a report that one subnet on you Windows NT Server network is experiencing a large amount of broadcast traffic.Which tool should you use to determine which computers are generating the most traffic?A.Response ProbeB.Performance MonitorC.Windows NT DiagnosticsD.Windows NT Server 4.0 Network MonitorD9. You Windows NT Server network uses the single master domain model.The master domain contains seven domain controllers and 2,000 user accounts. Using Performance Monitor,you determine that the PDC is being overloaded with synchronization to the BDCs.What should you do to reduce the load on the PDC?A. Add a new BDC to the domain.B. Stop the Net Logon service on the PDC.C. Increase the Pulse registry entry on the PDC.D. Increase the Pulse Concurrency registry entry on PDC.C10. You are running Windows NT Server 4.0 Network monitor on the Windows NT Server computer that functions as the DNS,DHCP,and WINS server for the network. All computers on the network use TCP/IP with DHCP,DNS,and WINS.You capture 1,200 packets.How should you configure the display filter to view only the packets pertaining to the assignment of IP addresses?A. Protocol==SMBB. Protocol==DHCPC. Protocol==BROWSERD. *NETBIOS Multicast(ETHERNET)<->*ANYB11. You are administrratoor of a Windows NT Server computer named Techs.Techs has an intel Pentium 133-MHz processor,32 MB of RAM,and 2-GB SCSI hard disk.Techs functions as a file-and-print server for 115 client computers.Users of client computers have recently started reporting slow reponse times when they access files located on Techs.You run Performance Monitor and gather the following average statistics.Computer:\\TECHSObject:Processor o%Processor Time80.835Object:MemoryPages/sec101.155Object:ServerBytes Total/sec84364.461Object:PhysicalDisk o%disk Time100.000What should you do Techs to provider the greatest increase in performance?A. Upgrade the processor.B. Upgrade RAM to 64 MBC. Upgrade Techs to a multiprocessor system.D. Implement a stripe set with parity.B12. you are using an accounting application to print checks.The printer jams in the middle of the print job.The accounting application will allow you to reprint the checks.You turn off the printer and clear the jammed checks.What should you to do in Print Manager to complete printing this batch of checks ?A.Se lect Resume from the Printer menu.B.Select Resume from the Document menu.C.Select Restart from the Document menu.D.Select Pause Printing from the Printer menu,and then resume printing.B13. Your Windows NT Server computer is configure with six SCSI hard disks.One hard disk is the system disk,and the other five are configured as a stripe set with parity.After a power outage,your server reboots,and you discover that two of the five hard disks in the stripe set wiyh parity have failed.You replace both failed hard disks.What else should you do to recover from the hard disk failure?A.Regenerate the stripe set with parity by using Disk Administrator.B.Wait for Windows Nt server to regenerate the stripe set with parity.C.Create a stripe set across all five hard disks,and then restore from tape bacpup.D.Create a stripe set with parity across all five disks,and then restore from tape backup.D14. After you install a new device driver for a SCSI hard disk, you discover that your Windows Server computer will not start.You do not have the Windows NT setup disks but you have an Emergency Repair disk.What must you do to recover the system?(Choose two.)A.Create the Windows NT setup disks by using the Winnt.exe program on anthor computer.B.Restore the registry from the Emergency Repair disk by using the Rdisk.exe utility.C.Boot with the Emergency Repair disk and recover the registry.D.Boot with the Windows NT setup disks and restore the registry from the Emergency Repair disk.AD15. You install Windows NT Server without creating an Emergency Repair disk. You then configure several SCSI devices and printers.You want to back up the configuration settings so that you can quickly restore the computer in the event of a startup failure.How should you do this?A.Save a copy of the registry by using the Windows NT Backup program.B.Save all configuration information to disk by using Disk Administrator.C.Make a copy of the registry hives by using Save Key in the Registry Editor.D.Creat e an Emergency Repair disk with the current configuration settings by using the Rdisk.exe utility.D16. Reduce logon validation traffic over the 56-Kbps link.Proposed solution:Reinstall the Windows NT Server in London as a BDC.Add WINS and DHCP to the Windows NT Server computer in London.Configure all client computers in London to use the London WINS server.Configure the replicationGovernor registry entry on the BDC to 25 percent.Configure the two WINS servers as pull partners only.Which rsults does the proposed solution produce?A. the proposed solution produces the required results and produces all of the optional desired results.B. the proposed solution produces the required results and produces two of the optional desired results.C. the proposed solution produces the required results but does not produce any of the optional desired results.D. the proposed solution does not produce the required results.A17. Users report slow reponse times from one of the servers on your Windows NT Server network. This server acts as a file-and-print server. You suspect very high utilization on one of the disk drives.Which action providers the most information for determining which disk partition has the highest utilization?A.In Performance Monitor,view the LogicalDisk object.B.In Performance Monitor,view the Paging File object.C.In Performance Monitor,view the Servercounter for the Thread object.e the Diskperf utility to analyze the activity occurring on a per-file basis.A18. You receive a report that one subnet on you Windows NT Server network is experiencing a large amount of broadcast traffic.Which tool should you use to determine which computers are generating the most traffic?A.Response ProbeB.Performance MonitorC.Windows NT DiagnosticsD.Windows NT Server 4.0 Network MonitorD19. You Windows NT Server network uses the single master domain model.The master domain contains seven domain controllers and 2,000 user accounts. Using Performance Monitor,you determine that the PDC is being overloaded with synchronization to the BDCs.What should you do to reduce the load on the PDC?A. Add a new BDC to the domain.B. Stop the Net Logon service on the PDC.C. Increase the Pulse registry entry on the PDC.D. Increase the Pulse Concurrency registry entry on PDC.C20. You are running Windows NT Server 4.0 Network monitor on the Windows NT Server computer that functions as the DNS,DHCP,and WINS server for the network. All computers on the network use TCP/IP with DHCP,DNS,and WINS.You capture 1,200 packets.How should you configure the display filter to view only the packets pertaining to the assignment of IP addresses?A. Protocol==SMBB. Protocol==DHCPC. Protocol==BROWSERD. *NETBIOS Multicast(ETHERNET)<->*ANYB21. You are administrratoor of a Windows NT Server computer named Techs.Techs has an intel Pentium 133-MHz processor,32 MB of RAM,and 2-GB SCSI hard disk.Techs functions as a file-and-print server for 115 client computers.Users of client computers have rece ntly started reporting slow reponse times when they access files located on Techs.You run Performance Monitor and gather the following average statistics. Computer:\\TECHSObject:Processor o%Processor Time80.835Object:MemoryPages/sec101.155Object:ServerBytes Total/sec84364.461Object:PhysicalDisk o%disk Time100.000What should you do Techs to provider the greatest increase in performance?A. Upgrade the processor.B. Upgrade RAM to 64 MBC. Upgrade Techs to a multiprocessor system.D. Implement a stripe set with parity.B22. you are using an accounting application to print checks.The printer jams in the middle of the print job.The accounting application will allow you to reprint the checks.You turn off the printer and clear the jammed checks.What should you to do in Print Manager to complete printing this batch of checks ?A.Select Resume from the Printer menu.B.Select Resume from the Document menu.C.Select Restart from the Document menuD.Select Pause Printing from the Printer menu,and then resume printing.B23. Your Windows NT Server computer is configure with six SCSI hard disks.One hard disk is the system disk,and the other five are configured as a stripe set with parity.After a power outage,your server reboots,and you discover that two of the five hard disks in the stripe set wiyh parity have failed.You replace both failed hard disks.What else should you do to recover from the hard disk failure?A.Regenerate the stripe set with parity by using Disk Administrator.B.Wait for Windows Nt server to regenerate the stripe set with parity.C.Create a stripe set across all five hard disks,and then restore from tape bacpup.D.Create a stripe set with parity across all five disks,and then restore from tape backup.D24. After you install a new device driver for a SCSI hard disk, you discover that your Windows NT Server computer will not start.You do not have the Windows NT setup disks but you have an Emergency Repair disk. What must you do to recover the system?(Choose two.)A.Create the Windows NT setup disks by using the Winnt.exe program on anthor computer.B.Restore the registry from the Emergency Repair disk by using the Rdisk.exe utility.C.Boot with the Emergency Repair disk and recover the registry.D.Boot with the Windows NT setup disks and restore the registry from the Emergency Repair disk.AD25. You install Windows NT Server without creating an Emergency Repair disk. You then configure several SCSI devices and printers.You want to back up the configuration settings so that you can quickly restore the computer in the event of a startup failure.How should you do this?A.Save a copy of the registry by using the Windows NT Backup program.B.Save all configuration information to disk by using Disk Administrator.C.Make a copy of the registry hives by using Save Key in the Registry Editor.D.Create an Emergency Repair disk with the current configuration settings by using the Rdisk.exeutility.D26. Reduce logon validation traffic over the 56-Kbps link.Proposed solution:Reinstall the Windows NT Server in London as a BDC.Add WINS and DHCP to the Windows NT Server computer in London.Configure all client computers in London to use the London WINS server.Configure the replicationGovernor registry entry on the BDC to 25 percent.Configure the two WINS servers as pull partners only.Which rsults does the proposed solution produce?A. the proposed solution produces the required results and produces all of the optional desired results.B. the proposed solution produces the required results and produces two of the optional desired results.C. the proposed solution produces the required results but does not produce any of the optional desired results.D. the proposed solution does not produce the required results.A27. Users report slow reponse times from one of the servers on your Windows NT Server network. This server acts as a file-and-print server. You suspec very high utilization on one of the disk drives.Which action providers the most information for determining which disk partition has the highest utilization?A.In Performance Monitor,view the LogicalDisk object.B.In Performance Monitor,view the Paging File object.C.In Performance Monitor,view the Servercounter for the Thread object.e the Diskperf utility to analyze the activity occurring on a per-file basis.A28. You receive a report that one subnet on you Windows NT Server network is experiencing a large amount of broadcast traffic.Which tool should you use to determine which computers are generating the most traffic?A.Response ProbeB.Performance MonitorC.Windows NT DiagnosticsD.Windows NT Server 4.0 Network MonitorD29. You Windows NT Server network uses the single master domain model.The master domain contains seven domain controllers and 2,000 user accounts. Using Performance Monitor,you determine that the PDC is being overloaded with synchronization to the BDCs.What should you do to reduce the load on the PDC? A. Add a new BDC to the domain.B. Stop the Net Logon service on the PDC.C. Increase the Pulse registry entry on the PDC.D. Increase the Pulse Concurrency registry entry on PDC.C30. You are running Windows NT Server 4.0 Network monitor on the Windows NT Server computer that functions as the DNS,DHCP,and WINS server for the network. All computers on the network use TCP/IP with DHCP,DNS,and WINS.You capture 1,200 packets.How should you configure the display filter to view only the packets pertaining to the assignment of IP addresses?A. Protocol==SMBB. Protocol==DHCPC. Protocol==BROWSERD. *NETBIOS Multicast(ETHERNET)<->*ANYB31. You are administrratoor of a Windows NT Server computer named Techs.Techs has an intel Pentium 133-MHz processor,32 MB of RAM,and 2-GB SCSI hard disk.Techs functions as afile-and-print server for 115 client computers.Users of client computers have recently started reporting slow reponse times when they access files located on Techs.You run Performance Monitor and gather the fol lowing average statistics.Computer:\\TECHSObject:Processor o%Processor Time80.835Object:MemoryPages/sec101.155Object:ServerBytes Total/sec84364.461Object:PhysicalDisk o%disk Time100.000What should you do Techs to provider the greatest increase in performance?A. Upgrade the processor.B. Upgrade RAM to 64 MBC. Upgrade Techs to a multiprocessor system.D. Implement a stripe set with parity.B32. you are using an accounting application to print checks.The printer jams in the middle of the print job.The accounting application will allow you to reprint the checks.You turn off the printer and clear the jammed checks.What should you to do in Print Manager to complete printing this batch of checks ?A.Select Resume from the Printer menu.B.Select Resume from the Document menu.C.Select Restart from the Document menu.D.Select Pause Printing from the Printer menu,and then resume printing.B33. Your Windows NT Server computer is configure with six SCSI hard disks.One hard disk is the system disk,and the other five are configured as a stripe set with parity.After a power outage,your server reboots,and you discover that two of the five hard disks in the stripe set wiyh parity have failed.You replace both failed hard disks.What else should you do to recover from the hard disk failure?A.Regenerate the stripe set with parity by using Disk Administrator.B.Wait for Windows Nt server to regenerate the stripe set with parity.C.Create a stripe set across all five hard disks,and then restore from tape bacpup.D.Create a stripe set with parity across all five disks,and then restore from tape backup.D34.After you install a new device driver for a SCSI hard disk, you discover that your Windows NT Server computer will not start.You do not have the Windows NT setup disks but you have an Emergency Repair disk.What must you do to recover the system?(Choose two.)A.Create the Windows NT setup disks by using the Winnt. exe program on anthor computer.B.Restore the registry from the Emergency Repair disk by using the Rdisk.exe utility.C.Boot with the Emergency Repair disk and recover the registry.D.Boot with the Windows NT setup disks and restore the registry from the Emergency Repair disk.AD35. You install Windows NT Server without creating an Emergency Repair disk. You then configure several SCSI devices and printers.You want to back up the configuration settings so that you can quickly restore the computer in the event of a startup failure.How should you do this?A.Save a copy of the registry by using the Windows NT Backup program.B.Save all configuration information to disk by using Disk Administrator.C.Make a copy of the registry hives by using Save Key in the Registry Editor.D.Create an Emergency Repair disk with the current configuration settings by using the Rdisk.exe utility.D微软认证模拟试题：IE4.0考题Additional components added in to IEAK that are custom, must be digitally signed and in What type of format?A. (. dat)B. (. ico)C. (. exe)D. (. cab)Answer: C, DCAB files are executables that are added into IEAK for custom component install. They should be :A. Approved by versionB. Digitally signedC. Approved by IE development teamD. Compressed for installationAnswer: BWhich of the following would allow your user to access certain files but at the same time avoid her from downloading unsigned controls?A. Do not place any URLs in any zone.B. Place URLs in question in the Restricted Sites Zone.C. Place URLs in question in the Restricted Sites Zone and set Download Unsigned ActiveX Controls to Disable.D. Place URLs in question in the Restriced Sites Zone with medium security settings.Answer: AWhen Installing IE 4.0 on a NT 4.0 Workstation, the user must login as which of the following to complete the installation.A. Member of Server OperatorsB. Any userC. Member of Power UsersD. Member of AdministratorsAnswer: C, DWhen Installing IE 4.0 on a Windows 95 machine, the user must login as which of the following to complete the installation.A. Member of Server OperatorsB. Any userC. Member of Power UsersD. Member of AdministratorsAnswer: BWhich settings will be imported from Netscape Navigator 3.0 to Internet Explorer 4.0?A. cookies, bookmarks, & proxy informationB. plug- ins and favoritesC. cookies, plug- ins and proxy settingsD. favorites, cookies and plug- insAnswer: AHow many favorites or favorite links can you add during a custom build of IE4.0 through IEAK?A. 20B. 10C. 200D. 100Answer: CHow many download sites can you add to a custom setup of IE4.0 through IEAK?A. 20B. 10C. 200D. 100Answer: BSuppose the following situation exists: Several developers at your company frequently download ActiveX components from the Internet for beta testing.Required Result:Prompt the developers before downloading signed ActiveX controls.Optional Desired Results:1) Enable the developers to download unsigned ActiveX controls.2) Enable the developers to run ActiveX scripts.Proposed Solution:Set up Internet Explorer and accept the default configuration.Which results does the proposed solution produce?A. The proposed solution produces the required result and both of the optional desired results.B. The proposed solution produces the required result and only one of the optional desired results.C. The proposed solution produces the required result but neither of the optional desired results.D. The proposed solution does not produce the required result.Answer: BWhere does IE get the information for the AutoComplete fearture?A. Favorites folderB. Manually AddedC. Temporary Internet Files folderD. History folderAnswer: DTo customize the control panel and my computer of a custom install of IE4.0 which files must be modified?A. Mycomp. htmB. Mycomp. httC. Controlp. htmD. Controlp. httAnswer: CFor an ISP using IEAK for IE4.0 what are the 2 types of user signups available?A. Internet sign- up serverB. Use sign up wizard in setupC. Serverless setupD. ISP connection wizardAnswer: A, CYou are an administrator for a global organization. Your users require multiple languages for the Internet Explorer. You currently have 3 different installation options and need them in 3 different languages. How many different times must you reset your system's regional settings in order to make your custom packages.A. noneB. sixC. threeD. nineAnswer: AThe resolution of a fully qualified domain name to an IP address uses what service?A. WINSB. DNSC. PPTPD. ARPAnswer: BAfter setting up a dialing parameters, How should you test to see if your configuration is correct?A. Do a test install and run setup. exeB. Run Setup. ins from command lineC. Click verify information on dialing parameters screenD. Click test sign up pageAnswer: DIn which stage of building a custom version of IE4.0 through IEAK ,will you be able to modify the security zone?A. Zone 1B. Zone 3C. Zone 4D. Zone 5Answer: D。
70210试题(二)_微软认证模拟题库(1)-微软认证试题
70210试题（二）_微软认证模拟题库(1)-微软认证试题a. Grant the manager NTFS Full Control permission to the files.b. Grant the manager NTFS Take Ownership permission to the files.c. Log on to the network as a Recovery Agent and decrypt the files for the manager.d. Log on to the network as a member of the Backup Operators group and decrypt the files for the manager.Answer：B14. You administer a network consisting of 14 Windows 2000 Professional computers and 1 Windows 2000 Server. You want all computers to share a single dialup account with a local Internet service provider (ISP). You buy a 56K V.90 modem. How do you enable Internet Connection Sharing? (Choose all that apply)a. Configure the shared modem to use software handshaking.b. Configure the dialup connection to enable On-Demand dialing.c. Configure the dialup connection to enable Internet Connection Sharing.d. Configure all other computers to have a dialup connection that uses the shared modem.e. Attach the modem to one of the Windows 2000 Professional computers and create a dialup connection to the ISP.f. Attach the modem to one of the Windows 2000 Professional computers and share the modem with the network.Answer：B,C15. Your routed TCP/IP network has 8 Windows 2000 Servers and 62 Windows 2000 Professional computers. TCP/IP is the only network protocol in use. On 10 new Windows 2000 Professional computers, you want to use NetBIOS names to connect to all shared network resources. You assign an IP address and subnet mask to each new computer. What two additional TCP/IP properties must be assigned properly?a. Bindings.b. DNS.c. Gateway.d. WINS.e. DHCP.Answer：C,D16. You configure your portable Windows 2000 Professional computer to redirect all files saved to the My Documents folder to your home folder. What two actions should be performed to ensure that all files in the My Documents folder are available when the computer is not on the network?a. Enable offline files in Windows Explorer.b. Create a shortcut in My Network Places to access your home folder.c. Create a shortcut in Windows Explorer to access offline folders from the desktop.d. Use Synchronization Manager to configure your home folder to be available offline.e. Use Windows Explorer to configure the properties of your home folder to be available offline. Answer：A,E17. After installing USB camera drivers, your computer’s USB port becomes unusable. You suspectthat you have installed drivers that are not certified for Windows 2000 Professional. How can you configure your USB board to prevent uncertified drivers from being installed in the future? (Choose two)a. Enable driver signing.b. Disable driver signing.c. Start the computer in Debug mode and replace the camera driver using the Device Manager.d. Start the computer using the Recovery Console and restore System State data.e. Start the computer in Safe mode and replace the camera drivers using Add/Remove Hardware. Answer：A,E18. You purchase a USB ISDN adapter for your portable Windows 2000 computer. Plug and play fails to detect the new device. You try the same adapter on your desktop Windows 2000 computer and it works fine. What should you do to allow the ISDN adapter to work in your portable computer?a. Use the Device Manager to enable the USB manager root hub.b. Contact the hardware manufacturer to obtain an upgrade for the plug and play BIOS on your portable computer.c. Enable the USB host controller in the Device Manager.d. Install the ISDN adapter in Safe Mode.Answer：B19. After installing a new AGP video card in your Windows 2000 Professional computer, your display defaults to 16 colors, 640 x 480 resolution. You install the manufacturer’s drivers for the card and restart the computer. The monitor is now blank. How do you recover?a. Start the computer in Debug mode. Restore the original adapter driver settings.b. Start the computer using the Emergency Repair disk and restore original driver settings.c. Start the computer in Safe Mode and rename the video adapter in the Device Manager.d. Start the computer using the Recovery Console and rename the AGP driver.Answer：B20. Your Windows 2000 portable computer uses offline files. These files include a large Microsoft Project file and several smaller personal files. The computer connects to the network remotely via dialup at scheduled intervals throughout the day to download email. You don’t want the large Project file to be synchronized, but want your personal files synchronized. What two steps must you take?a. Enable quick synchronization.b. Configure synchronization to prompt before synchronize items.c. Configure synchronization to synchronize the Project file only when locally logged on to the LAN.d. Configure synchronization of your personal files when connected locally to the LAN and via dialup.Answer：C,D21. Your two hard drives, C and D, both have more than 500 MB of free space. When running memory intensive applications, access to your C: drive is noticeably slower. What should you doto maximize disk performance?a. Configure the initial size of the paging file on drive C to be set by the system and place a maximum size on virtual memory of 64 MB.b. Configure the initial size of the paging file on drive C to be set by the system and place a maximum size on virtual memory of 128 MB.c. Move the paging file to drive D. Have the system set initial virtual memory size and maximize virtual memory size to 256 MB.d. Move the paging file to drive D. Set the initial size of virtual memory to 56 MB and maximize the size of virtual memory to 256 MB.Answer：C22. You compress a 2 MB bitmap file to 1 MB and attempt to copy it to a 1.4 MB floppy disk. However, you are given the error, “Drive is Full.” What should you do next?。
70-210 考题回忆(1)-微软认证试题
70-210 考题回忆(1)-微软认证试题You want to upgrade 150 computers from wks4 to 2000 pro. You create a unattent.txt file by using setup manager. You copy the file to a floppy disk. You then start the installation on a test computer by using the windows 2000 professional CD-ROM. You insert the floppy disk after the computer starts. Although you had set the user interaction level to full unattended mode, you are prompted for all the required parameters. You want to ensure that the unattended installation does not prompt you for input. What should you do?A. Add a {data} section to aunattenD.txt, and set the unattended install Parameter to YES.B. Add an {Un-attend} section to unattenD.txt, and set the OEMP reinstall parameter to Yes.C. Rename unattend.txt on the floppy disk to winnt.sif***D. Create a $oem$$1 folder on the hard disk of the test computer, and copy unattenD.txt to the folder.Also got a drag and drop.You are the administrator of your company network. A user named Peter runs Windows 2000 Professional on his portable computer. Peter wants to be able to work at home on files that were created in the office on the company network. Prior to logging off the network and leaving the office, Peter enables Offline Files.Peter calls you from home and reports that copies of his folders and files on the network are notavailable on his portable computer. What should you instruct Peter to do?A. Enable file and print sharing, Peter will be able to access his files at homeimmediatelyB. Synchronize all offline files, Peter will be able to access his files at homeimmediatelyC. At the office, make all files available offline, Peter will be able to access his files the next time he logs off the networkD. At the Office, create a shortcut to the Offline Files folder, Peter will be able to access his files the next time he logs off the networkAnswer: C5. You are the administrator of your company's network. The software department is preparing to rewrite an accounting application so that it will run on Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98.You want to configure the computers in the software department so that users can use bothWindows 98 and Windows 2000 Professional during the project. You also want to ensure that thecomputers are configures for optimal disk performance. In addition, you want to ensure that users in the software department can ac。
微软认证的模拟试题-2
MIAC微软信息化应用能力认证推广办公室一、单项选择题：10.小王在计算机上使用的用户帐号是管理员帐号，他创建了一个名为“临时雇员”的帐号，那么这个“临时雇员”的用户帐号是默认是属于（）组。
A.管理员组AdministratorsB.超级用户组Power UsersC.普通用户组UsersD.来宾组GuestsANSWER: C14.当用户李四登录一台Windows XP Professional SP2计算机后，当他双击控制面板中的“添加硬件”按钮后，出现了如本题图所示的提示，一般地能够说明李四帐号是一个（）。
A.普通用户帐号B.管理员帐号，但是被禁用了某些功能C.被禁用的帐号D.超级用户帐号ANSWER: A15.小王经常乘坐火车出差。
在火车上，他需要长时间打开笔记本电脑处理事务。
有个令人头痛的事情是笔记本电脑的电池供电时间总是很短暂。
他向你咨询，有什么办法在不添加或更换电池的情况下，能够延长电池的供电时间，满足其移动办公的需求。
参考本题图选择正确选项（）。
A.通过“设备管理器”进行配置B.通过“驱动程序签名”进行配置C.通过“Windows Update”进行配置D.通过“硬件配置文件”进行配置ANSWER: D16.如本题图所示，微软的官方网站上已经有一个针对Windows XP Professional SP2的更新程序包，你应该选择哪个选项尽快到微软官方网站上获取该更新包？A.更改或删除程序B.添加新程序C.添加/删除Windows组件D.设定程序访问和默认值ANSWER: B26.如本题图所示，小王要将“开始→所有程序→Microsoft Office”中Microsoft Office Excel2003按钮放在自己计算机的任务栏上，他应该采取的最佳操作是（）。
A.直接将该按钮拖动到目标位置，然后放开鼠标左键B.先按住CTRL键不放，在讲该按钮拖动到目标位置后放开鼠标左键C.右单击该按钮，选择“发送到任务栏”选项D.右单击该按钮，选择“复制”，然后用鼠标单击任务栏目标位置，选择“粘贴”选项ANSWER: B30.一台计算机安装了Windows XP Professional SP2操作系统，有关桌面快捷图标的正确说法是（）。
70-210试题(四)_微软认证模拟题库(1)-微软认证试题
70-210试题（四）_微软认证模拟题库(1)-微软认证试题－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－a. Create a bootable floppy disk that automatically runs winnt32.exe /checkupgradeonly and distribute it to each user on the network.b. Configure SMS on your server and conduct an inventory of all hardware on the Windows 95 computers.c. Remotely access the registries of all Windows 95 computers and generate a Report within Regedt32.d. Enable driver signing when connecting to a RIS server to image the Windows 95 computers. Answer：A42. An employee named Will at your company has dexterity problems. You configure a Windows 2000 Professional computer to use an on-screen keyboard and you enable sticky key options. You save these options to a shared folder on his local drive. Another employee named Scott needs his same configuration. You log into Scott’s computer and access Will’s shared folder. What should you immediately do next?a. Copy the .acw file to the c:Documents and SettingsDefault User folder.b. Import the .acw file into Scott’s registry.c. Import the .acw file using the Utility Manager on Scott’s computer.d. Change the permissions of the .acw file on the network share to allow access to Scott’s user account.Answer：D43. You install Windows 2000 on a portable computer that is configured for Advanced Power Management (APM). When shutting down, the Windows 2000 Shut Down screen remains on the screen and the computer does not shut down. What must you do?a. Restart the computer and disable APM in the BIOS.b. Restart the computer and enable hibernation support under Power Options.c. Restart the computer and enable APM under Power Options.d. Restart the computer and create a different power scheme under Power Options.Answer：B44. You create a roaming user profile for a user named Art, but when he logs in, he is told that Windows cannot locate his roaming profile and that he will be logged in using local profile information. What must you do to ensure that this roaming profile is effective wherever Art logs in?a. Create a home folder for Art.b. Share the directory which holds his profile.c. Map a network drive to his network profile directory.d. Use the %username% variable when naming his user directory.Answer：B45. A user receives confirmation every time a print job is successfully printed to a shared printer connected to a Windows 2000 Server computer. She would like this feature disabled. How?a. Disable the “Notify when remote documents are printed” option on the server that hosts the printer.b. Enable Silent Mode on the printer driver on the server that hosts the printer.c. Disable bi-directional support on the printer’s driver on the user’s computer.d. On the user’s computer, disable Notification in the Advanced Printing Features section on the Advanced tab of the printer driver’s properties.Answer：D46. A user named Janet reports that she can send faxes through her locally installed fax modem on her Windows 2000 Professional computer, but cannot receive faxes. You log on to her computer as a local administrator. What should you do?a. Use the Set Service Manager to start the Fax service and configure the Fax service to start automatically.b. Run the Fax Service Manager. Select the Fax Management Server and enable the device to receive faxes.c. Open the Fax applet within the Control Panel to reinstall the Fax Service and configure Fax Services to receive faxes.d. Open the Fax applet within the Control Panel to add a Fax Operator and enable the Fax device to receive faxes.Answer：B47. How do you ensure that other computers on your LAN are only granted HTTP and FTP access through the shared Internet connection on your computer? (Choose two)a. Set the Internet Connection Sharing application type ‘FTP’ to use remote server port 21.b. Set the Internet Connection Sharing application type ‘HTTP’ to use remote server port 80.c. Set the Internet Connection Sharing application type ‘HTTP’ to use remote server port 25.d. Configure your shared Internet connection to disable on-demand dialing.e. Configure your shared Internet connection to disable LCO extension.Answer：A,B48. You configure a computer to dual boot between NT Workstation 4.0 and Windows 2000 Professional. NT is installed on a 4 GB partition on drive C. Windows 2000 is on a 4 GB partition on drive D. You enable a disk quota on drive D to prevent users from saving data to the D drive, but notice that this is not effective. What should you do to prevent users of the computer from saving to drive D?a. Configure drive D as a dynamic partition within NT Workstation 4.0.b. Use Windows 2000 Professional to enable encrypting file system on drive D.c. Use Windows 2000 Professional to configure NTFS permissions on drive D to deny access to the users.d. Reinstall Windows NT Workstation after configuring disk quotas.Answer：C49. Your Windows 2000 Professional computer has 45 MB of hard disk space on drive C and 620 MB of free space on drive D. Print jobs are failing because of inadequate room for spooling on drive C. How can you configure print jobs to be spooled to drive D?a. Change the location of the spool folder from the print server properties.b. Within the properties of the printer driver, change the spool directory to the D drive within Advanced Settings.c. Move the spool directory to the D drive.d. Mount drive C as a subdirectory of drive D.Answer：A50. You upgrade your Windows NT Workstation computer to Windows 2000. Prior to the upgrade,you had a local security policy requiring that passwords contain at least 12 alphanumeric characters. After the upgrade, no such security policies are allowed. How can you restore the old security policies?a. Edit the existing security policy.b. Use the local computer policy to configure the local security policy.c. Use Security Configuration and Analysis to support the security files as core files.d. Old security policies cannot be transferred.Answer：A51. You upgrade the NT Workstation of a financial manager to Windows 2000 Professional. After the upgrade, the manager can no longer run financial applications on her computer. She is a member of the Local Users group. What should you do to ensure that all financial applications run on her computer?a. Use the Computer Magnet to configure separate memory space for each financial application in the user’s account.b. Use Security Tablets to adjust security policies for the user and her account in the Power Users group on her computer.c. Use Security Configuration and Analysis to configure the default security policy INF to allow financial application execution on her computer.d. Use Security Tablets to relax permissions for all local groups on the computer.Answer：C感谢阅读，欢迎大家下载使用！。
微软认证考试试题及答案
微软认证考试试题及答案1. 下面哪一个不是C++的标准数据类型? (D )A. intB. charC. boolD. real2. break关键字在哪一种语法构造中不能使用? (C)A. for语句B. switch语句C. if语句D. while语句3. 类的继承方式有几种? ( B)A. 两种B. 三种C. 四种D. 六种4. extern关键字的作用是什么? (A )A. 声明外部链接B. 声明外部头文件引用C. 声明使用扩展C++语句D. 声明外部成员函数、成员数据。
5. C库函数strstr的功能是? (A )A. 查找子串B. 计算字符串长度C. 字符串比拟D. 连结字符串6. stl::deque是一种什么数据类型? (A )A. 动态数组B. 链表C. 堆栈D. 树7. STL库里含有下面的哪一种泛型算法? (B)A. KMP查找B. 折半查找C. 冒泡排序D. 快速排序8. 现在最快且最通用的排序算法是什么? (A)A. 快速排序B. 冒泡排序C. 选择排序D. 外部排序9. Win32下的线程的哪一种优先级最高? ( c)A. THREADPRIORITYHIGHESTB. THREADPRIORITYIDLEC. THREADPRIORITYTIMECRITICALD. THREADPRIORITYABOVENORMAL10. 下面四个选项中，哪一个不是WinMain函数的参数? ( B )A. HINSTANCEB. INTC. LPSTRD. WPARAM1. vector::iterator重载了下面哪些运算符? (b )A. ++B. >>C. *(前置)D. ==2. CreateFile( )的功能有哪几个? (A B C D)A. 翻开文件B. 创立新文件C. 文件改名D. 删除文件3. 下面哪些是句柄(HANDLE)? (AB )A. HINSTANCEB. HWNDC. HDCD. HFONT4. 下面哪些不是OpenGL标准几何元素的绘制模式? ( A D )A. GLFOGB. GLLINESTRIPC. GLPOINTSD. GLTRIANGLEFAN5. 下面哪些运算符不能被重载? ( A B C )A. 做用域运算符“::”B. 对象成员运算符“.”C. 指针成员运算符“->”D. 三目运算符“? :”6. 下面哪些人曾参与了世界上第一个C++编译器的开发? ( BC )A. Bill GatesB. Stanley LippmanC. Anderson HejlsbergD. Bjarne Stroustrup1. 一个大小为320 X 192，颜色为灰度索引色的设备相关位图有15360字节。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
70-210试题（二）_微软认证模拟题库(1)-微软认证试题
a. Grant the manager NTFS Full Control permission to the files.
b. Grant the manager NTFS Take Ownership permission to the files.
c. Log on to the network as a Recovery Agent and decrypt the files for the manager.
d. Log on to the network as a member of the Backup Operators group and decrypt the files for the manager.
Answer：B
14. You administer a network consisting of 14 Windows 2000 Professional computers and 1 Windows 2000 Server. You want all computers to share a single dialup account with a local Internet service provider (ISP). You buy a 56K V.90 modem. How do you enable Internet Connection Sharing? (Choose all that apply)
a. Configure the shared modem to use software handshaking.
b. Configure the dialup connection to enable On-Demand dialing.
c. Configure the dialup connection to enable Internet Connection Sharing.
d. Configure all other computers to have a dialup connection that uses the shared modem.
e. Attach the modem to one of the Windows 2000 Professional computers and create a dialup connection to the ISP.
f. Attach the modem to one of the Windows 2000 Professional computers and share the modem with the network.
Answer：B,C
15. Your routed TCP/IP network has 8 Windows 2000 Servers and 62 Windows 2000 Professional computers. TCP/IP is the only network protocol in use. On 10 new Windows 2000 Professional computers, you want to use NetBIOS names to connect to all shared network resources. You assign an IP address and subnet mask to each new computer. What two additional TCP/IP properties must be assigned properly?
a. Bindings.
b. DNS.
c. Gateway.
d. WINS.
e. DHCP.
Answer：C,D
16. You configure your portable Windows 2000 Professional computer to redirect all files saved to the My Documents folder to your home folder. What two actions should be performed to ensure that all files in the My Documents folder are available when the computer is not on the network?
a. Enable offline files in Windows Explorer.
b. Create a shortcut in My Network Places to access your home folder.
c. Create a shortcut in Windows Explorer to access offline folders from the desktop.
d. Use Synchronization Manager to configure your home folder to be available offlin
e.
e. Use Windows Explorer to configure the properties of your home folder to be available offline. Answer：A,E
17. After installing USB camera drivers, your computer’s USB port becomes unusable. You suspect
that you have installed drivers that are not certified for Windows 2000 Professional. How can you configure your USB board to prevent uncertified drivers from being installed in the future? (Choose two)
a. Enable driver signing.
b. Disable driver signing.
c. Start the computer in Debug mode and replace the camera driver using the Device Manager.
d. Start the computer using the Recovery Console and restore System State data.
e. Start the computer in Safe mode and replace the camera drivers using Add/Remove Hardware. Answer：A,E
18. You purchase a USB ISDN adapter for your portable Windows 2000 computer. Plug and play fails to detect the new device. You try the same adapter on your desktop Windows 2000 computer and it works fine. What should you do to allow the ISDN adapter to work in your portable computer?
a. Use the Device Manager to enable the USB manager root hu
b.
b. Contact the hardware manufacturer to obtain an upgrade for the plug and play BIOS on your portable computer.
c. Enable the USB host controller in the Device Manager.
d. Install the ISDN adapter in Safe Mod
e.
Answer：B。