WT(F)污水提升设备

WT(F) 系列污水提升设备WT(F) SERIES SEWAGE LIFTING DEVICE400免费咨询电话：400-188-5009400 Free consultation Tel：400-188-50092012 年 第一版 第一次印刷 first printing and first edition in 2012印刷日期：2012.11.10 Date of printing：2012.11.10WT(F) SERIES SEWAGE LIFTING DEVICEThis device, which uses a "split type impurities separator", is used specially for draining out the sewage in basements so as to prevent the water pump from block-up and wrapping formed by the impurities in the sewage and, in particular, theOutlinesewage drain-out in a sealed status leaves an extremely good protection for the environment. The function of impurities separation and counter-flush with this device settles such aRange of useproblem as on-time cleaning is required to avoid filth deposit and eliminate the drawbacks occurring with the use of the conventional sewage pumps. Because of the full-sealed andCharacteristicstainless steel made sewage storing tank and the unique ventilation mode, this device leaves no affection to the environment around and acts as environmental protection.Function characteristicsControl characteristicModel meaningResidents used water: living quarters, villa areas etc. Public places: schools, hospitals, bus stations, airports, theatres, gymnasiums etc. Commercial places: hotels, restaurants, shops, office buildings etc. Production sites: manufacturing and processing enter-Conditions of useWorking principleprises etc.Product configuration tableThe built-in performance parameter tableFree of block-up With the unique filth isolation and drain-out technique used, the pump's impeller will not contact with the impuritiesThe built-in outline and installation dimension chartso that no wrapping and blocking will be formed and the life of the pump is made extended. No deposit, cleaning-freeThe built-out performance parameter tableCarry out the separating technique between the impurities and the sewage and utilize the pressure for the pump to drain out the sewage to have the filth drained out together; theThe built-out outline and installation dimension chartavailable counter-flush function makes the manmade cleaning unnecessary in case of filth deposit. Pollution-free Because of the full-sealed design, no sewage is overflowed and peculiar smell exists, leaving a safe environment around.WT(F) SERIES SEWAGE LIFTING DEVICERemote monitor (optional) A remote monitor system is available for choice, with which, the people can check the working status of the device at any time, without need to go to the site. Less land area The device needs a small land area and is flexibly mountable, thus making the construct ion cost saved and the expenditure lowered. Single-pump automatic running status automatic switchover at single-pump failure In case of a failure with the pump, the program will automatically turn the device into "single-pump automatic running status" and then, when both pump and heat protection are reset, the system will automatically have "two-pump automatically alternative running" status reset. Once such abnormal conditions occur as water is accumulated in the puddle in the basement or lack-of-phase or; WT(F) WT(F)WT(F) series device comes as an integral device integrating sewage collection, isolation process, liquid level control, lift and drain-out and holds the following characteristics:wrong phase occurs with the power supply, the control system is capable of detecting and recognizing it and will present the abnormal condition automatic alarm hint. The device can perform the site automatic/manual control switchover. WT(F) series underground sewage device is equipped with a stainless steel floating ball level controller, which is set with "pump start level" and "pump stop level". The controller uses the lever principle and magnetic action to have the contact switch work to control the level for the case where the level positions are frequently operated./Manual/automatic running function In the manual mode, any one of the pumps can be operated and, when the water level reaches the designed lowest level, automatic stop can still be made. In the automatic mode, the pump will be automatically started to drain out water when the water level gets to the set upper limit and stopped when the level gets to the set lower limit so as to have two pumps alternatively run and in a mutually standby status: e.g. when a failure occurs with one pump, the device will be switched over to the other one automatically and the failure alarming hint will be shown. Use the unique impurity-sewage separator structure Use of the unique sewage separator structure makes the pump without contacting with the wrapping impurities so that it is prevented for the impeller to be blocked up by the wrapping impurities and thus preventing the motor from burning out: the counter-flush function makes no filth deposit inside of the device, without need of cleaning and greatly saving the cost for the device running, management and maintenance. There is no water accumulated in the basement When the puddle water in the basement is accumulated to some position, the device will automatically start the auxiliary pump to drain it out.WT (F)/Quantity of pump Head (m) Flow (m /h3F-G-F-counter-flush type, G-cutting type (1)Sewage lifting deviceRemark: (1) this catalog shows the counter-flush configuration and, for the cutting type, please contact the designing office.50Hz380V220VFrequency of the power supply: 50Hz, three-phase AC 380V, single-phase 220V. The impurities in the sewage (including flexible impurities and solid grains) shall be capable of self-flowing inside40There are two pumps alternative running, low-level pump stop, high-level pump start etc. functions, protections for pump failure, phase failure and wrong phase order and alarming at a running fault.PH4-10of the pipeline. The sewage temperature shall not be over 40 value 4-10 and the sewage density <1200Kg/m3. , PH<1200Kg/m3 80The ambient temperature around the control cabinet shall not be over 80%.WT(F) SERIES SEWAGE LIFTING DEVICEThe impurities contained sewage goes into the waterseparating cross-tee from the water inlet and then goes through the check valves separately and then into the separator, from where the sewage, after getting filtered, flows into the water tank and the impurities separated via filtering stay in the separator temporarily and the impurities-free sewage stays in the water tank temporarily. When the level of the sewage inside of the water tankIntelligent controller Exhaust portWater inletWater outletM1A1 B1 1 M1 A2 2 1 A1 B1reaches the set highest level, the level controller will feedback the working information to the control system to have it start the pump M1 to drain out the sewage. During this process, the pressure for the pump to drain out the sewage makes the check valve A1 closed and, at the same time, the check valve B1 opened to have the filth temporarily stored in the separator 1 discharged together with the sewage. At the same time when the pipeline system of pump M1, separator 1, check valves A1 and B1 works, sewage is stillPumpCheck valve Check valvePumpCheck valveM1 B1A1flowing into the pipeline system of check valve A2 and lets the separator 2 separating the filth from it. When the sewage inside of the water tank is drained out to the set lowest level, the pump M1 stops working and, at this time, the check valve A1 is opened to restart receiving the sewage flowing into it and the check valve B1 is closed to resist the sewage already drained out to flow back. When the sewage reaches the set highest level again, the level controller will feedback the detected signal to the control system to let it start the pump M2. During this process, the pressure for the pump to drain out the sewage is used to have the check valve A2 closed and B2 opened and, at the same time, to have the filth temporarily stored in the separator 2 discharged together with the sewage. At the same time when Working principle drawingCheck valveM2 A2 B2 M2 A1 1 2 2 A2 B2M2 B2A2the pipeline system of pump M2, separator 2, check valves A2 and B2 works, sewage is still flowing into the pipeline system of check valve A1 and lets the separator 2 separating the filth from it. When the sewage inside of the water tank is drained out to the set lowest level again, the pump M2 stops working and, at this time, the check valve A2 is opened to restart receiving the sewage flowing into it and the check valve B2 is closed to resist the sewage already drained out to flow back. During the drain-out, the system controls two pumps to work alternatively to repeat the above process.6 7Check valve Piping No. Name Sewage pump Sewage collection tank Electric control cabinet Liquid level controller Gate valve Number Remark1 2 3 4 52 1 1 2 1 4 1HT250 304 Q235 LEC-2AcS-WT-N 304 Q235 304 Q235 304 Q235 304 Q235WT(F) SERIES SEWAGE LIFTING DEVICEPump No. Mobel Mobel Flow (m3/h) Head (m) Power (kW) NumberWater tank Volume NumberControl cabinet NumberDN1The water inletDN2The water inletDN3Exhaust portMobel(m ) 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 2.2 2.2 2.2 2.2 2.23Mobel1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18WT(F)2-15/8 WT(F)2-15/12 WT(F)2-15/16 WT(F)2-15/22 WT(F)2-15/30 WT(F)2-25/25 WT(F)2-25/32 WT(F)2-25/36 WT(F)2-30/10 WT(F)2-30/15 WT(F)2-30/22 WT(F)2-30/30 WT(F)2-30/35 WT(F)2-50/8 WT(F)2-50/10 WT(F)2-50/15 WT(F)2-50/20 WT(F)2-50/2550WQZ15-8-1.1 50WQZ15-12-1.1 50WQZ15-16-1.5 50WQZ15-22-2.2 50WQZ15-30-3 50WQZ25-25-4 50WQZ25-32-5.5 50WQZ25-36-7.5 65WQZ30-10-2.2 65WQZ30-15-3 65WQZ30-22-4 65WQZ30-30-5.5 65WQZ30-35-7.5 80WQZ50-8-2.2 80WQZ50-10-3 80WQZ50-15-4 80WQZ50-20-5.5 80WQZ50-25-7.515 15 15 15 15 25 25 25 30 30 30 30 30 50 50 50 50 508 12 16 22 30 25 32 32 10 15 22 30 35 8 10 15 20 251.1 1.1 1.5 2.2 3 4 5.5 7.5 2.2 3 4 5.5 7.5 2.2 3 4 5.5 7.52 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2SX-1 SX-1 SX-1 SX-1 SX-1 SX-1 SX-1 SX-1 SX-2 SX-2 SX-2 SX-2 SX-2 SX-3 SX-3 SX-3 SX-3 SX-31 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1LEC-2AcS-WT-1.1 LEC-2AcS-WT-1.1 LEC-2AcS-WT-1.5 LEC-2AcS-WT-2.2 LEC-2AcS-WT-3 LEC-2AcS-WT-4 LEC-2AcS-WT-5.5 LEC-2AcS-WT-7.5 LEC-2AcS-WT-2.2 LEC-2AcS-WT-3 LEC-2AcS-WT-4 LEC-2AcS-WT-5.5 LEC-2AcS-WT-7.5 LEC-2AcS-WT-2.2 LEC-2AcS-WT-3 LEC-2AcS-WT-4 LEC-2AcS-WT-5.5 LEC-2AcS-WT-7.51 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 L 1200 1200 1200 1200 1200 1200 1200 1200 1400 1400 1400 1400 1400 1600 1600 1600 1600 1600 L1 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 L2 1000 1000 1000 1000 1000 1000 1000 1000 1200 1200 1200 1200 1200 1400 1400 1400 1400 1400 L3 200 200 200 200 200 200 200 200 300 300 300 300 300 200 200 200 200 200 L4 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 W 1400 1400 1400 1400 1400 1400 1400 1600 1600 1600 1600 1600 1600 1800 1800 1800 1800 1800 W1 1000 1000 1000 1000 1000 1000 1000 1000 1200 1200 1200 1200 1200 1400 1400 1400 1400 1400 W2 1260 1260 1260 1260 1260 1260 1260 1460 1460 1460 1460 1460 1460 1660 1660 1660 1660 1660 W3 1300 1300 1300 1300 1360 1300 1300 1500 1500 1500 1500 1500 1500 1700 1700 1700 1700 1700 H 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 H1 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 H2 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 n444444444444444444d 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 DN1 DN2 DN3 DN4 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50H2 H H1L1 L3L2 L4 LW1 nd W2 W3 WNo.Mobel1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18WT(F)2-15/8 WT(F)2-15/12 WT(F)2-15/16 WT(F)2-15/22 WT(F)2-15/30 WT(F)2-25/25 WT(F)2-25/32 WT(F)2-25/36 WT(F)2-30/10 WT(F)2-30/15 WT(F)2-30/22 WT(F)2-30/30 WT(F)2-30/35 WT(F)2-50/8 WT(F)2-50/10 WT(F)2-50/15 WT(F)2-50/20 WT(F)2-50/25WT(F) SERIES SEWAGE LIFTING DEVICEPump No. Mobel Mobel Flow (m3/h) Head (m) Power (kW) NumberWater tank Volume NumberControl cabinet NumberDN1The water inletDN2The water inletDN3Exhaust portMobel(m ) 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.4 1.4 1.4 1.4 1.4 1.6 1.6 1.6 1.6 1.63Mobel1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17WT(F)W2-15/12 WT(F)W2-15/16 WT(F)W2-15/22 WT(F)W2-15/30 WT(F)W2-25/25 WT(F)W2-25/32 WT(F)W2-25/36 WT(F)W2-30/10 WT(F)W2-30/15 WT(F)W2-30/22 WT(F)W2-30/30 WT(F)W2-30/35 WT(F)W2-50/8 WT(F)W2-50/10 WT(F)W2-50/15 WT(F)W2-50/20 WT(F)W2-50/2550WL15-12-1.1 50WL15-16-1.5 50WL15-22-2.2 50WL15-30-3 50WL25-25-4 50WL25-32-5.5 50WL25-36-7.5 65WL30-10-2.2 65WL30-15-3 65WL30-22-4 65WL30-30-5.5 65WL30-35-7.5 80WL50-8-2.2 80WL50-10-3 80WL50-15-4 80WL50-20-5.5 80WL50-25-7.515 15 15 15 25 25 25 30 30 30 30 30 50 50 50 50 5012 16 22 30 25 32 36 10 15 22 30 35 8 10 15 20 251.1 1.5 2.2 3 4 5.5 7.5 2.2 3 4 5.5 7.5 2.2 3 4 5.5 7.52 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2SX-1 SX-1 SX-1 SX-1 SX-1 SX-1 SX-1 SX-2 SX-2 SX-2 SX-2 SX-2 SX-3 SX-3 SX-3 SX-3 SX-31 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1LEC-2AcS-WT-1.1 LEC-2AcS-WT-1.5 LEC-2AcS-WT-2.2 LEC-2AcS-WT-3 LEC-2AcS-WT-4 LEC-2AcS-WT-5.5 LEC-2AcS-WT-7.5 LEC-2AcS-WT-2.2 LEC-2AcS-WT-3 LEC-2AcS-WT-4 LEC-2AcS-WT-5.5 LEC-2AcS-WT-7.5 LEC-2AcS-WT-2.2 LEC-2AcS-WT-3 LEC-2AcS-WT-4 LEC-2AcS-WT-5.5 LEC-2AcS-WT-7.51 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 L 1200 1200 1200 1200 1200 1200 1200 1400 1400 1400 1400 1400 1600 1600 1600 1600 1600 L1 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 L2 1000 1000 1000 1000 1000 1000 1000 1200 1200 1200 1200 1200 1400 1400 1400 1400 1400 L3 200 200 200 200 200 200 200 300 300 300 300 300 200 200 200 200 200 L4 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 W 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2200 2300 2300 2300 2300 2300 W1 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 W2 1005 1005 1005 1005 1005 1005 1005 1005 1005 1005 1005 1005 1055 1055 1055 1055 1055 W3 2050 2050 2050 2050 2050 2050 2050 2050 2050 2050 2050 1500 2150 2150 2150 2150 2150 H 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 1400 H1 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 H2 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 n66666666666666666d 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 DN1 DN2 DN3 DN4 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50H2 H H1L2 L4L1 L3 LW1 nd W2 W3 W W2No.Mobel1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17WT(F)W2-15/12 WT(F)W2-15/16 WT(F)W2-15/22 WT(F)W2-15/30 WT(F)W2-25/25 WT(F)W2-25/32 WT(F)W2-25/36 WT(F)W2-30/10 WT(F)W2-30/15 WT(F)W2-30/22 WT(F)W2-30/30 WT(F)W2-30/35 WT(F)W2-50/8 WT(F)W2-50/10 WT(F)W2-50/15 WT(F)W2-50/20 WT(F)W2-50/25。