海特排气简介中文版
WeatherMaker 8000TS 高效气炉产品说明书
WEATHERMAKER®8000TS – 58TUA, 58TMA, 58UXT, 58DXTWITH ComfortHeat™ TECHNOLOGYCONSISTENT COMFORT WITH 80% AFUEeatherMaker 8000TS gas furnace with ComfortHeat ™echnology deliversconsistent, efficient indoor ComfortHeatechnology enables the eatherMaker 8000TS gas indoor air circulation and overall comfort. Unlike ordinary furnaces, the eatherMaker 8000TS more consistent level up to 90% of the time. That means the temperature swings, as well as the hot and cold drafts, typically associated with ordinary furnaces are virtually With ComfortHeat ™ eatherMaker 8000TS gas furnace can achieve and maintain your desiredindoor temperature and improve the quality of the air you breathe.Offering a lower heating stage, this furnace creates heating cycles that last up to 40%longer than ordinary models. This The WeatherMaker 8000TS gas furnace operates at a low stage of heating 90% of the time.This low-speed capacity ensures quiet operation and improved comfort far beyond what can be expected from an ordinary single speed furnace.Custom made comfort with Carrier’s W eatherMaker ®8000TS Gas Furnace with ComfortHeat ™T echnology .t w o -s t a g e c o m f o r t i n d o o r a i r q u a l i t yevery season.Ordinary Furnace ComfortHeat ™TechnologyThermostat Set PointCOMFORT ZONETOO WARMTOO COOLaddition of a high-efficiency Carrier air filter, this system can provide truly superior air filtration.most severe outdoor weather conditions.Enhanced indoor air quality is made easier with our air cleaner cabinet,a standard accessory with theWeatherMaker 8000TS gas furnace.When installed as a part of your system,this cabinet allows for the easy and convenient addition of a Carrier high-efficiency air filter.Ask your dealer if the air cleaner cabinet will work with your specific application.Economical comfort is created by the two-speed inducer motor.This component ensures peak efficiency by directing the flow of air through the heat exchangers for improved heat transfer.Energy-efficient performance of the WeatherMaker 8000TS gas furnace comes from our heat exchanger.Carrier’s Super-S ™Heat Exchanger TM converts more than 80% of the heat from the furnace into useable heat for your home.Optimum comfort and energy savings is the result of our two-stage gas valve.The low stage improves comfort on milder days.The high stage ensures comfort during more extreme outdoor weather conditions.Efficient,reliable operation is ensured by the hot surface ignition which elimi-nates the need for typical pilot lights.Maximum comfort and efficiency is controlled by a patented smart control board which customizes furnace opera-tion to deliver precise indoor weather.Protect your family – Carrier’s exclu-sive draft safeguard switch automatically shuts down furnace operation if a com-mon vent is blocked.Model58TUA Upflow58UXT Upflow/Horizontal (California)Model 58TMA (except California)Model 58UXT (California) Horizontal left or rightBy gently pushing airthroughout your home, the W eatherMaker ®8000TS gas furnace with ComfortHeat ™T echnology minimizesoperational noise created by air turbulence. Due to the low-stageoperation and improved air circulation, the W eatherMaker 8000TS gas furnace greatly reduces the temperature swings and noise caused by continuous on and off cycling. The quiet operation of the W eatherMaker 8000TS gas furnace enhances your overall comfort.At Carrier, we understand that indoor weather equipment is an investment in your family’s comfort. That’s why we designedthe W eatherMaker 8000TS gas furnace for quality-conscioushomeowners like you. In addition to providing precise, consistent indoor comfort, the W eatherMaker 8000TS gas furnace is built to last. The aluminized, crimped seamconstruction of the Super-S ™heat exchanger resists corrosion. The hot surface ignition safely and efficiently starts the aluminized steel burners for reliable operation.125424753It’s an economical choice for home heating.673Model 58TMA (except California)Model 58DXT (California)Downflowo p e r a t i o nr e l i a b i l i tyW A R R A N T YCarrier takes pride in offering the best indoor weather equipment available. In fact, we offer a 20-year limited warranty on the heatexchanger. The entire W eatherMaker 8000TS is guaranteed by a five-year limited warranty.Ask your indoor weather expert about extended warranties.BlockageCO EscapesCommon FlueCarrier’s exclusive draft safeguard switch further enhances safety and reliability by automatically shutting down furnace operation if a common vent becomes blocked, preventing harmful f lue gases from entering your living space. Even the durable design of the cabinet is built for long-lastingperformance. All of these added features, combined with the fact that this furnace is built in an ISO 9001 certified factory, ensures that theW eatherMaker 8000TS gas furnace delivers the custom made comfort and reliable performance that you’ve come to count on from the experts in custom made indoor weather.p e r f o r m a n c e16www.carrier .com© Carrier Corporation 2000858-366Manufacturer reserves the right to discontinue,or change at any time,specifications or designs without notice or without incurring obligations.Before purchasing this appliance,please read the important energy cost and efficiency information available from your dealer.Always look for these symbols,the home heating industry seals of certified performance,efficiency and capacity.HumidifierAs part of a total indoor weather system,a Carrier humidifier replenishes moisture to dry air.Evaporator Coil A Carrier evaporator coil is matched with the proper outdoor unit to provide top cooling efficiency and years of reliable service.FurnaceCarrier offers a complete line of gas furnaces,including theWeatherMaker 8000TS gas furnace.Air CleanerCarrier air cleaners can substantially improve your indoor weather by removing harmful and irritating airborne pollu-tants from your home.ZoningComfort zoning allows you to set different tempera-tures for different areas of your home.Enjoy greater comfort and added energysavings with room-to-room temperature control.Comfort Ventilatorhome.door air with conditioned and energy exchanges.g a s f u r n a c e /a i r c o n d i t i o n e r s y s t e mCarrier indoor weather systems offerunmatched performance.Carrier has been on the leading edge of indoor weather technol-ogy since Willis Carrier began developing products for tem-perature and humidity control in 1902.T oday, Carrier’s scientists,engineers, and dealers continue to pro-vide homeowners with the most advanced indoor weather systemsavailable. This technological advantage has enabled Carrier to design, installe x p e r t i s eand maintain customized indoor weather systems to fit the precise needs of individual homeowners.Your local Carrier dealer provides expert needs analysis and can recommend the perfect combination of Carrier indoor comfort products to meet your unique requirements.By matching a complete system including air conditioning, indoor air quality, zoning, comfort control and heating with theW eatherMaker ®8000TS gas fur-nace, your Carrier dealer can help you enjoy greater comfort and lower operating costs, backed by the world’s proven leader in indoor weather: Carrier.Air ConditionerCarrier’s complete line of air conditioners provides reliable,high-efficiency cooling for long-lasting comfort and energy sav-ings.Ask your Indoor Weather Expert about Carrier’s environmentally-sound air conditioners with Puron ®refrigerant.A member of the United Technologies Corporation family.Stock Symbol UTX .。
改装排气管性能介绍
TREX鼓性能
TREX响鼓的效果：采用直通设计理念，跟据车型排量及性能设计大小不同的消音管道设计，从而达到个性化要求，声音在90分贝左右，主要提升汽车的高转速马力。
TREX轻音鼓的效果：内部采用内回压设计理念，主要提高中低转速扭力，高转速马力也同样得到相应的提升，使用该产品使你的爱车起步快、爬坡有力，声音在3000转左右发出，声音清脆低沉，声音85分贝左右。
TREX静音鼓的效果：采用内部双次回压设计理念，根据不同车型的排量设专车专用鼓，声音在75分贝左右，声音静，提升中低转速扭力。
TREX HKS型---是直排带回压的，提升中低转速扭力和高转速马力。
声音比直排的小，比回压的大，是比较清脆的，在95分贝绝不扰人。
高转速时无共振声。
（有日本HKS的效果）设计原理：按气流沿壁走向的原理。
TREX J鼓回压鼓---提升马力和扭力的，音质也相当讲究，鼓身完全为了增加马力兼降低音量而设的，完全可以在行街与高速行走任选择，整段排气采用日本最流行的渐次放大的设计式样，更能发挥引擎的潜能，声音在90分贝左右，平衡了油耗加速反应，动力提升，街鼓成为了理想的街道行走之喉,。
海特克柱塞泵样本-HA2FO
nmax
rpm
qvmax Pmax Pmax Tk T T
J m
L/min kW kW Nm/MPa Nm Nm L kgm2 kg
56 56.1 2000
3750
63 63.0 2000
3750
80 80.4 1800
3350
90 90.0 1800
3350
107 106.7 1600
3000
125 125.0 1600
110
H A 2 F O系 列 定 量 柱 塞 泵
型号说明
HA2F O 80 / 6 1 R - P A B 05
轴向柱塞元件 斜轴式结构，定量
HA2F
工作方式
泵，开式回路
O
规格 排 量 （m L / r ) 10 12 16 23 28 32 45 56 63 80 90 107 125 160 180
流动方向
顺时针转动 S到B
逆时针转动 S到A
安装位置
安装位置可选。初次启动之前必须用油灌注满泵壳，并 在泵工作时始终保持充满油液。
符号
油口
A,B
工作油口
B(A)
S
吸油口
T
泄漏油口
T
S
壳体泄漏油压力
壳 体 泄 漏 油 最 大 允 许 压 力0 . 2 M P a .
进口工作压力
S口 的 最 低 压 力 P abs max
37 22 25 1.9 67 76 0.17 0.0004 5.4
16 16.0 3150
6000
49 29 34 2.5 88 100 0.17 0.0004 5.4
23 22.9 2500
4750
全球知名排气系统企业排名
随着汽车工业的高速发展，汽车已经成为人们日常生活中不可缺少的交通工具。
但与此同时，汽车尾气排放也成为城市空气污染的重要来源。
对车辆排放的限制，已成为政治、经济、决策的一个焦点。
改善发动机燃烧状况，降低油耗，减少污染物排放，或是开发清洁能源汽车，已经成为现代汽车工业的发展趋势。
电子控制缸内直喷+精确控制空燃比+三元催化器可使发动机能耗及排放大幅降低。
多气门技术、稀燃技术、连续气门正时及升程可变技术、分层充气、废弃再循环（EGR）与电控技术相结合，是目前车用汽油机的发展方向。
汽车排气系统属于相当成熟的行业，2013年全球汽车排气系统市场规模大约为317亿美元，比2012年微增1.3%。
主要原因包括欧盟市场疲弱，日元大幅度贬值，中国推迟柴油车国IV标准。
不过随着排放标准的进一步严格，排气系统的市场规模将稳步成长，尤其是柴油车（Diesel Vehicle)领域。
预计2014年汽车排气系统市场的规模可达330亿美元，增长4.1%。
目前中国汽车排气系统可以分欧系、美系、日系、韩系和本土系。
欧系：主要有Faurecia、Bosyen、Eberspacher。
Faurecia包揽大部分欧系中低端车型，包括一汽大众FAW、上海大众SVW、东风雪铁龙DCAD、东风标致DPAD、上海通用SGM、宝马奔驰的中低端车型。
高端车型由Bosyen和Eberspacher分享。
美系：主要有Tenneco、Katcon。
主要客户也是上海通用SGM。
Tenneco和Eberspacher 的合资厂分享部分FAW中高端车型市场。
日系：主要有Sango、Futuba、Yutaka、Hirotec。
Sango和Futuba主要客户是丰田，Yutaka主要客户是Honda，Hirotec主要客户是MAZDA。
韩系：只有Sejong。
包揽韩国现代所有车型的市场。
本土系：主要分两种方式；一种是内部In-house完成，如重庆长安、比亚迪和长城汽车；另一种由专业厂家来完成，这些专业厂家主要有无锡威孚力达催化净化器、重庆海特汽车排气系统、天津卡达克汽车等。
2021 KTM 300 EXC TPI 极端尾气吸引力说明书
THE KING OF HARD ENDUROThe KTM 300 EXC TPI has been at the forefront of the insane development in the highest levels of extreme enduro performance. This nimble, lightweight, all-terrain master fears no obstacle and with the advent of TPI technology, has risen to ridiculous new heights. The refined bodywork and ergonomics make moving around a bliss, while the frame allows the rider to select a line with instant precision. An innovative and strong 3D stamped exhaust pipe, as well as the impressive coolingand suspension, all help to make the 2021 KTM 300 EXC TPI ready for the most extreme enduro challenges.ULTRA-LIGHT EXTREME ENDURO04ENGINE KTM’s EXC 2-stroke engines are designed to satisfy even the most advanced enduro riders. They feature a sophisticated power valve system, providing smooth and controllable power characteristics. Refined for 2020, they are again the center of each model’s power arch for 2021.TPI The Transfer Port Injection (TPI) system features two fuel injectors which spray the optimal amount of fuel down into the rear transfer ports. This downstream injection guarantees excellent atomization of the fuel with the upstreaming air, resulting in highly efficient combustion and significantly reduced losses of unburned fuel. An additional ambient pressure sensor guarantees even faster adaption of the system to different altitudes, while two selectable engine maps allow riders to get the most out of their machines.CUTTING-EDGE TWO-STROKES KTM’s 2021 EXC range includes the most potent and capable 2-stroke enduro weapons available on the market. Refined through years of valuable KTM factory rider feedback, these extreme machines are a result of KTM’s unwavering commitment to constant progression. Apart from a dynamic handling chassis, all 2-strokes feature revolutionary TPI (Transfer Port Injection) technology, delivering unrivaled power throughout the entire rev range no matter what the conditions. T HE COMPLETE PACKAGE HIGH PERFORMANCE, FUEL INJECTED T ECHNOLOGY EXHAUSTThe latest exhaust pipes play a key role in the improved power delivery and performance of the 2021 KTM EXC range. Designed to conquer the most extreme of trails, the KTM 250 EXC TPI and KTM 300 EXC TPI feature a HD (Heavy Duty) pipe with stiff outer shell, minimal width, and plenty of ground clearance.0706BODYWORKThe KTM Factory Riders were involved in shaping the bodywork and the goal of complete harmony between rider and bike was achieved. The plastics provide perfect contact points for the rider, maximum freedom of movement, and improved overall handling.SUSPENSION Providing optimal suspension characteristics, the WP XPLOR front fork has received minor updates for 2021. Offering race-proven performance in the most extreme enduro conditions, it now comes with an additional preload adjuster that allows for easy setting changes for varying track or trail conditions.FRAME The latest spec frames feature ideal longitudinal and torsional stiffness, providing optimal feedback to the rider, agile handling, and exceptional stability.READY FOR MORE EXTREME ACTION The 2021 EXC models feature several significant highlights that raise the bar of enduro performance to extreme levels. The entire range combines class-leading performance with precise handling and easy maneuverability. The impressive dynamic of the 2021 KTM EXC models is how well all the features work together to create race-winning machines of the highest caliber.GRAPHICSNew, high-quality inlay graphics add some fierce style to the sharp bodywork of the new EXC range, with contrasting grey and black decals complementing the striking KTM orange.CHAMPIONSHIP- WINNING CHASSIS 0809PERFECT BALANCE OF POWER AND HANDLINGThe KTM 350 EXC-F has become thebest-selling 4-stroke competition model ever, due to its 250-like agility and 450-like power. Following years of development, this trail master has continued to gain in performance, torque, handling, and agility, delivering more power than ever, while advancing even closer to the lightweight maneuverability of a 250. The basic idea of this bike is easy to see, and continues to be a recipe for success for those who want a proven race winner.RACE-PROVEN PERFORMANCE11CUTTING-EDGE 4-STROKES KTM refuses to knock down a gear in its mission to make the EXC-F models the most competitive 4-stroke machines on the market today. Low weight, unbeatable torque, efficient engine management, sensitive delivery, and even more reliability have been KTM development priorities over recent years. Developed for riders of any skill range, the 2021 KTM EXC-F models are race-winning machines across all offroad racing disciplines.OFFROAD POWERHOUSE CLASS-LEADING T ORQUE AND POWER ENGINE Compact dimensions with class-leading power output, KTM’s fuel-injected 4-stroke engines are the most refined and powerful on the market. They feature enduro-specific exhaust systems, latest-technology electronic fuel-injection, and several internal components that all help deliver efficient power throughout the rev range. These Euro IV homologated engines are the lightest and most competitive yet, with an unrivaled power-to-weight ratio.12S P E C I A L E D I T I O N E N D U R O M O D E L S D e v e l o p e d f o r t h e g n a r l i e s t t r a i l s o n t h e p l a n e t , t h e f l a g s h i p K T M E X C S I X D A Y S m o d e l s a n d t h e e x c l u s i v e K T M 300 E X C T P I E R Z B E R G R O D E O a r e h e r e t o m a k e t h e t o u g h e s t e v e n t o u g h e r . B o a s t i n g t h e v e r y l a te s t i n i n n o v a t i o n , t h e s e s p e c i a l e d i t i o n K T M m a c h i n e s a r e t h e m o s t R E A D Y T O R A C E e n d u r o b i k e s a v a i l a b l e o n t h e m a r k e t t o d a y . C e l e b r a t i n g t h e s p o r t of e n d u r o , t h e y a r e r e a d y t o t a c k l e e v e n t h e m o s t e x t r e m e a n d m o s t d e m a n d i ng r a c e s a r o u n d th e g l o b e .R E A D Y F O R T H E U L T I M A T E E X T R E M E SKTM EXC SIX DAYS 2021No chain is stronger than its weakest link, so when facing the ultimate challenge, every element needs to be as tough as the rest. KTM knows what it takes to get the job done and has developed a race-winning package built as tough as they come. Featuring an impressive list of components including the latest-spec WP XPLOR forks, CNC machined triple clamps, a map select switch, and an exclusive design, these models not only look the part, but are ready for the hardest tests.BUILT FOR THE TOUGHEST CHALLENGESPECIAL FEATURES> SILENCERS WITH NEW SIX DAYS LOGO> RIMS WITH NEW SIX DAYS LOGO> ENGINE GUARD> FRONT AXLE PULLER> STEALTH REAR SPROCKET>R ADIATOR FAN FOR ALL 4-STROKES> HANDLEBAR WITH NEW SIX DAYS LOGO> SOLID REAR BRAKE DISC>F LOATING FRONT BRAKE DISC> ORANGE FRAME> ORANGE CNC TRIPLE CLAMPS> ORANGE CHAIN GUIDE> SIX DAYS SEATand many more …18KTM 300 EXC TPI ERZBERGRODEO 2021The ErzbergRodeo Red Bull HareScramble in Austria is known to be one of the toughest extreme enduro races on the planet. A truly limited-edition machine, the KTM 300 EXC TPI ERZBERGRODEO features a long list of special parts thatAS EXTREME AS IT GETSACOMP LIGHT HELMETAdvanced, lightweight offroad helmet with removable, moisture-wicking inner lining and cheek pads.B HUSTLE MX GOGGLESAdvanced performance MX goggles with three-layer fleece foam lining and LEXAN ® glass.CRACETECH SHIRTRobust quality and lightweight with breathable mesh panels for optimum ventilation, along with raglan-style sleeves for added comfort.DRACETECH GLOVESLightweight offroad gloves with silicone print for better grip, touchscreen functionality, and LYCRA ® finger sidewalls.ERACETECH PANTSDurable, lightweight offroad pants with perforated ventilation zones, heatproof and abrasion-resistant leather knee reinforcement.FTECH 7 EXC BOOTSMade exclusively for enduro riding, with a non-slip two-component sole and a stainless steel heel and toe protection.01LED HEADLIGHTIntense and extremely robust 1,500 Lumen headlight, specifically developed for the KTM Enduro range.02SKID PLATEMade from special high-strength plastic, the skid plate has been developed to provide the maximum level of protection at the lowest possible weight.03FACTORY FRONT WHEELAnodized D.I.D DirtStar rim, developed to produce the ideal compromise between rigidity and flexibility.04WAVE SEATFreedom of movement and perfect grip thanks to the “wave surface”, which acts as a stepped seat – even though it isn’t one.05FACTORY TRIPLE CLAMPManufactured from the highest-grade aluminum and tuned to produce perfect steering stem stiffness and flexibility – adapted precisely to the WP fork.06AKRAPOVIČ “SLIP-ON LINE”Akrapovič slip-on silencer offers more power and torque, uncompromising factory racing looks, and substantial weight savings.> V ISIT TO VIEW THE ENTIREKTM POWERPARTS & KTM POWERWEAR RANGEKTM PowerWear and KTM PowerParts have been developed to deliver the highest levels of performance, protection, and agility for both the rider and their motorcycle.MADEFOR EXTREMES01020506TECHNICAL DATAKTM 150 EXC TPIKTM 250 EXC TPIKTM 300 EXC TPIENGINE (LIQUID COOLED)ENGINE TYPESingle-cylinder, 2-stroke, Exhaust control Single-cylinder, 2-stroke, Exhaust control Single-cylinder, 2-stroke, Exhaust control ENGINE MANAGEMENT Continental TPI System Continental TPI System Continental TPI System DISPLACEMENT 143.99 cc 249 cc293.2 cc BORE X STROKE 58 mm x 54.5 mm 66.4 mm x 72 mm 72 mm x 72 mm COMPRESSION RATIO ---STARTER / BATTERY E-starter & kick-starter system / Lithium Ion 12V / 2Ah E-starter / Lithium Ion 12V / 2Ah E-starter / Lithium Ion 12V / 2Ah FUEL SYSTEMDellorto throttle body Ø 39 mmDellorto throttle body Ø 39 mmDellorto throttle body Ø 39 mmTRANSMISSIONCLUTCH Wet multi-disc DS clutch, Brembo hydraulics Wet multi-disc DDS clutch, Brembo hydraulics Wet multi-disc DDS clutch, Brembo hydraulics LUBRICATION Electronically regulated oil pump Electronically regulated oil pump Electronically regulated oil pump GEARBOX 6 gears6 gears6 gearsGEAR RATIOS12:33 15:31 17:28 19:26 21:25 20:2014:32 16:26 20:25 22:23 25:22 26:2014:32 16:26 20:25 22:23 25:22 26:20PRIMARY RATIO / FINAL DRIVE 23:73 / 13:48 (13:50)26:73 / 14:50 (13:50)26:73 / 14:50 (13:50)CHAINX-Ring 5/8 x 1/4"X-Ring 5/8 x 1/4"X-Ring 5/8 x 1/4"CHASSIS & BRAKESFRAME Central double-cradle-type 25CrMo4Central double-cradle-type 25CrMo4Central double-cradle-type 25CrMo4SUBFRAME AluminumAluminumAluminumHANDLEBARNEKEN, Aluminum Ø 28 / 22 mm NEKEN, Aluminum Ø 28 / 22 mm NEKEN, Aluminum Ø 28 / 22 mm STEERING HEAD ANGLE 63.5°63.5°63.5°TRIPLE CLAMP OFSET 22 mm 22 mm 22 mm MUFFLERAluminumAluminumAluminumFRONT SUSPENSION WP XPLOR USD fork, Ø 48 mm WP XPLOR USD fork, Ø 48 mm WP XPLOR USD fork, Ø 48 mm REAR SUSPENSIONWP XPLOR shock absorber with PDS WP XPLOR shock absorber with PDS WP XPLOR shock absorber with PDS SUSPENSION TRAVEL FRONT / REAR 300 mm / 310 mm 300 mm / 310 mm 300 mm / 310 mm WHEELBASE 1,482 mm ± 10 mm 1,482 mm ± 10 mm 1,482 mm ± 10 mm RIMS FRONT / REAR 1.60 x 21"; 2.15 x 18" Giant 1.60 x 21"; 2.15 x 18" Giant 1.60 x 21"; 2.15 x 18" Giant TIRES FRONT / REAR 80 / 100-21"; 140 / 80-18"80 / 100-21"; 140 / 80-18"80 / 100-21"; 140 / 80-18"BRAKE FRONT / REARDisc brake Ø 260 / 220 mmDisc brake Ø 260 / 220 mmDisc brake Ø 260 / 220 mmDIMENSIONS & WEIGHTSEAT HEIGHT / GROUND CLEARANCE 960 mm / 370 mm 960 mm / 370 mm 960 mm / 370 mm TANK CAPACITY approx. 9 liters approx. 9 liters approx. 9 liters DRY WEIGHTapprox. 96.8 kgapprox. 103.4 kgapprox. 103.4 kgKTM 250 EXC-FKTM 350 EXC-FKTM 450 EXC-FKTM 500 EXC-FSingle-cylinder, 4-stroke, 4V / DOHC with finger followers Single-cylinder, 4-stroke, 4V / DOHC with finger followers Single-cylinder, 4-stroke, 4V / OHC with rocker arms Single-cylinder, 4-stroke, 4V / OHC with rocker arms Keihin EMS Keihin EMS Keihin EMS Keihin EMS 249.91 cc 349.7 cc449.9 cc510.9 cc 78 mm x 52.3 mm 88 mm x 57.5 mm 95 mm x 63.4 mm 95 mm x 72 mm 12.8:112.3:112.75:112.75:1E-starter / Lithium Ion 12V / 2Ah E-starter / Lithium Ion 12V / 2Ah E-starter / Lithium Ion 12V / 2Ah E-starter / Lithium Ion 12V / 2Ah Keihin throttle body Ø 42 mmKeihin throttle body Ø 42 mmKeihin throttle body Ø 42 mmKeihin throttle body Ø 42 mmWet multi-disc DDS clutch, Brembo hydraulics Wet multi-disc DDS clutch, Brembo hydraulics Wet multi-disc DDS clutch, Brembo hydraulics Wet multi-disc DDS clutch, Brembo hydraulics Pressure lubrication with 2 oil pumps Pressure lubrication with 2 oil pumps Pressure lubrication with 2 oil pumps Pressure lubrication with 2 oil pumps 6 gears6 gears6 gears6 gears13:32 16:30 16:24 23:28 23:23 26:2014:32 16:26 20:25 22:23 25:22 26:2014:36 17:32 19:28 22:26 23:24 26:2114:36 17:32 19:28 22:26 23:24 26:2124:73 / 14:52 (13:52)24:73 / 14:52 (13:52)31:76 / 14:52 (13:52)31:76 / 14:50 (13:50)X-Ring 5/8 x 1/4"X-Ring 5/8 x 1/4"X-Ring 5/8 x 1/4"X-Ring 5/8 x 1/4"Central double-cradle-type 25CrMo4Central double-cradle-type 25CrMo4Central double-cradle-type 25CrMo4Central double-cradle-type 25CrMo4AluminumAluminumAluminumAluminumNEKEN, Aluminum Ø 28 / 22 mm NEKEN, Aluminum Ø 28 / 22 mm NEKEN, Aluminum Ø 28 / 22 mm NEKEN, Aluminum Ø 28/22 mm 63.5°63.5°63.5°63.5°22 mm 22 mm 22 mm 22 mm AluminumAluminumAluminumAluminumWP XPLOR USD fork, Ø 48 mm WP XPLOR USD fork, Ø 48 mm WP XPLOR USD fork, Ø 48 mm WP XPLOR USD fork, Ø 48 mm WP XPLOR shock absorber with PDS WP XPLOR shock absorber with PDS WP XPLOR shock absorber with PDS WP XPLOR shock absorber with PDS 300 mm / 310 mm 300 mm / 310 mm 300 mm / 310 mm 300 mm / 310 mm 1,482 mm ± 10 mm 1,482 mm ± 10 mm 1,482 mm ± 10 mm 1,482 mm ± 10 mm 1.60 x 21"; 2.15 x 18" Giant 1.60 x 21"; 2.15 x 18" Giant 1.60 x 21"; 2.15 x 18" Giant 1.60 x 21"; 2.15 x 18" Giant 80 / 100-21"; 140 / 80-18"80 / 100-21"; 140 / 80-18"80 / 100-21"; 140 / 80-18"80/100-21"; 140/80-18"Disc brake Ø 260 / 220 mmDisc brake Ø 260 / 220 mmDisc brake Ø 260 / 220 mmDisc brake Ø 260 / 220 mm960 mm / 355 mm 960 mm / 355 mm 960 mm / 355 mm 960 mm / 355 mm approx. 9 liters approx. 9 liters approx. 9 liters approx. 9 liters approx. 103 kgapprox. 103.8 kgapprox. 105.5 kgapprox. 105.6 kgSIX DAYS & ERZBERGRODEO EDITIONS AVAILABLESIX DAYS EDITION AVAILABLE SIX DAYS EDITION AVAILABLE SIX DAYS EDITION AVAILABLE SIX DAYS EDITION AVAILABLE SIX DAYS EDITION AVAILABLE2425。
WAUKESHA天然气发动机
3.9空燃比
可燃混合气中空气质量与燃气
质量之比为空燃比。
空气质量
式中：α—空燃比
燃气质量
4四行程发动机工作原理
4.1进气行程
活塞在曲轴的带动下由上止点移至下止点。此时，进气门 开启，排气门关闭，曲轴转动180°。在活塞移动过程中， 汽缸容积逐渐增大，汽缸内气体压力逐渐降低，汽缸内形 成一定的真空度，空气和燃气的混合气通过进气门被吸入 汽缸，并在汽缸内进一步混合。
发动机主要由以下两大机构和几大系统组成，即由曲柄连 杆机构，配气机构、调速系统、空气和燃料供给系统、润 滑系统、冷却系统、点火系统和启动系统组成
1曲柄连杆机构
曲柄连杆机构是发动机实现工作循环，完成能量转换的主要 运动零件。它由机体组、活塞连杆组和曲轴飞轮组等组成。
2 配气机构
配气机构的功用是根据发动机的工作顺序和工作过程， 定时开启和关闭进气门和排气门，使可燃混合气或空气进 入气缸，并使废气从气缸内排出，实现换气过程。
4.2压缩行程
压缩行程时，进、排气门同时关闭。活塞从下止点向上止 点运动，曲轴转动180°。活塞上移时，工作容积逐渐缩 小，缸内混合气受压缩后压力和温度不断升高。
4.3作功行程
当活塞接近上止点时，由火花塞点燃混合气，混合气燃烧 释放出大量的热能，使汽缸内气体的压力和温度迅速提高。 高温高压的燃气推动活塞从上止点向下止点运动，并通过 曲柄连杆机构对外输出机械能。随着活塞下移，汽缸容积 增加，气体压力和温度逐渐下降。在做功行程，进气门、 排气门均关闭，曲轴转动180°。
涡流强度提高燃烧速度的原因：
1.缩短燃烧的滞燃期，使燃气与新鲜空气更快的混合； 2.提高火焰传播速度，涡流强度越大，火焰前锋的传播速
度越大，从而燃烧速度提高，热释放率增大。
GT-Power中文使用手册
奥地利remus排气管的详细介绍
REMUS【产品系列的介绍】REMUS是欧洲第一位的运动排气生产厂家，旗下有三大著名品牌：REMUS, SEBRING,L&W。
主要以生产制造高性能车辆排气系统为主。
业务分为OEM配套和AFTERMARKET售后改装市场两大部分。
OEM部分为绝大多数欧洲著名汽车制造厂及汽车改装厂进行配套，如：PORSCHE，RENAULT，AMG，BRABUS，ABT，AC，MPS等等。
REMUS【产品主分四大类】1）CLASSIC LINE（标准系列）该系列产品对应车型最为全面，系列产品均符合欧盟的噪音法规，排气声浪低沉浑厚。
基本上，该系列产品均为原装位设计，安装简便，安装位置严谨。
整体质感非常出色。
2）POWERSOUND LINE（调音系列）该系列产品采用了REMUS最新设计的FLAP（控制阀门）设计，手动调节控制阀门可以产生不同的排气声浪效果，同时，该系列首次采用了INTERCHANGABLE（可互换式）尾管设计，客户可以从多达8种以上的不同风格，不同设计的REMUS －POWERSOUND尾管中任意选择1支或多支，随意自行更换，以产生不同的视觉效果。
该系列产品也是目前REMUS最为主要的系列，基本上全部主流车型都有POWERSOUND排气管对应，该系列同样为原装位设计，安装简便。
在阀门全开时，该系列排气管对于动力的提升是非常明显的。
可以说是REMUS全部产品里对动力提升最大的一个系列。
以欧洲GOLF IV 1.8T为例，标准REMUS排气可以提升3～5马力，而POWERSOUND在阀门全开时对动力的可以提升到惊人的10～12马力。
3）RACING LINE （赛车系列）针对不同的客户需求，REMUS同时提供了RACING LINE系列产品。
该系列产品的最大特点是一改REMUS 低沉浑厚的排气声浪效果。
在低转速时排气声浪较为低沉，但是进入高转速区间时，RACING LINE释放出一种接近于赛车效果的高频声浪，刺激并令人兴奋。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
2002
重庆海安汽车部件有限公司成立，收购长安集团下属 重庆长安汽车配件总厂二分厂。
2004
天津海马催化技术有限公司成立； 河北海特汽车部件有限公司在河北定州市长安工业园成立
3、成长历程
2006
南京海特汽车部件有限公司在南京市溧水长安工业园注册成立
2008
重庆海特汽车排气系统有限公司成立； （原海安公司和
5、主要客户
5、主要客户
6、主要产品
6、主要产品
催化剂类系列产品
三元催化剂
5、主要产品
歧管催化器系列产品
长安欧诺汽车排气歧管总成
长安奔奔汽车排气歧管总成
吉利帝豪EC7排气歧管总成
广汽P7-1.3T三元催化器
6、主要产品
消声器总成系列产品
中消 后消 前管中消连接总成
前接管
后消音器总成
电磁振动台
燃烧器
横置发动机台架
7、主要设备
测试中心-声学及NVH控制能力 半消声室 排气系统声学品质发动机性能分析流程
LMS32通道数采系统
三坐标扫描仪
手持式声级计
7、主要设备
排放控制能力
美国西南研究所催化剂老化台架
催化剂小样评价系统
SSA-4200表面积分析仪
电感合等离子发射光谱仪
化学吸附仪
XRD-6000X射线衍射仪
4、经营业绩
五年战略规划（2015年-2019年） 公司实行五年战略滚动计划，已拟定2015-2019年滚动计划，未来五年经 营目标如下表所示：
未来五年经营目标（单 位：亿元） 年份 2015 2016 2017 销售收入 11.15 15.42 19.73
营业目标
30 25 20
15
10 5
0 2015 2016 2017 2018 2019
布局调整
库房提升
12.精益生产
从手工制造转为焊接单元式生产（2013-2014共建 成21个单元工作站，基本实现单元“一件流” 生 产）
5S管理推行、3定要素基本具备，现场员工基本养 成保持的习惯；
一件流
5S
13、企业文化
13.企业文化
海特企业文化：未来海特汽车排气系统将持续秉承“诚信为本 ,服务至上,永续 创新,追求卓越”的核心价值观,以“严谨认真,务实高效”的企业作风,以技术创 新为主导,与时俱进提升技术研发及管理水平,积极打造成国内最大的汽车排气系
质量成本管理
8、体系认证
8.体系认证
ISO/TS16949:2009 ISO 14001:2004
9、获得荣誉
9.获得荣誉
9.获得荣誉
9.获得荣誉
部分审核、考察活动剪影
北京奔驰考察
东风本田审核
一汽丰田审核
现代起亚考察
10、公司专利
10.公司专利
一种歧管式催化转化器 汽车尾气净化器性能检测系统
9.公司专利
汽车消声器的漏水结构 管件焊缝疲劳测试装置
10.公司专利
一种耐高温大比表面积氧化铝的制备方法 一种低贵金属含量高效三元催化剂及制备方法
11、行业交流
11.行业技术交流
海特王希杰在第三届上海汽车排气系统NVH技术研讨会
刘雷燕荣获机械工程设计-CAD项目二等奖， 胡江、胡建分别荣获三等奖
统研发中心,并努力成为国内一流,具有强劲国际竞争能力的机动车排放污染治理
的集成供应商
海特员工企业精神：本着“立即行动,团结一致,勇攀高新”企业精神,愿与各界朋 友真诚合作,共创绿色未来.
13.企业文化
2013年海排首届学术论文颁奖仪式
海特之窗-迎中秋 聚活力 拔 河比赛
海特之窗- 2014年夏季 篮球比赛
北京公司
重庆 海特总部 合肥公司
南京公司 柳州公司 湖南公司
3.成长历程
3、成长历程
1995
成都海特实业公司成立，主营：进出口建筑陶瓷机械设备
1998
成都海特实业兼并丰都县国营瓷厂，组建为重庆海特实业有限公司
1999
重庆海特环保技术有限公司成立，是中国第一家以“OEM ” 方式为主机厂生产三元催化器、消声器产品的厂家
谢谢大家！
谢谢!
2018
2019
24.04
28.35
4、经营业绩
战略规划
一、战略目标 打造成为“国内一流，具有国 际竞争能力”的机动车排气系统集 成（模块）供应商，2015年与外资 同类企业进行高水平持续竞争，树 立自主品牌旗帜。 二、六个核心能力打造 全力打造六个核心差异化竞争 力：全正向研发能力，系统集成 （模块化）能力，综合成本竞争力， 区域配套协作能力，质量体系保障 能力，优质高效服务能力。
2012年发动机排放控制技术研讨会
11.行业技术交流
我司技术中心论文在《内燃机》期刊发表
12.精益生产
现场布局调整、工艺提升，生产向精益化推进
A、布局调整、料架更改，包装箱更改； B、成品立体货架整改基本完成，长安部分工厂货架与 我司生产线使用货架形成一致。 C、ERP完成二次上线、供应商库存管理（VMI）实施, 大大降低外购件库存；出入库扫描系统基本调试正常 可以投入试运行。
4、经营业绩
4、经营业绩
4、经营业绩
2014年销售情况
公司名称 销售额 销售额 % (亿）
重庆海特 南京海特
河北海特 北京海斯特 哈尔滨海特 湖南海特 海特弘业 柳州海特 合计
5.54 1.73
1.11 0.70 0.36 0.48 1.20 0.14 11.26
49.24 %
15.39 %
9.89% 6.20% 3.16% 4.22% 10.69 % 1.20%
后消音器总成
7、主要设备
车间面貌
7、主要设备
制造设备类 焊接机器人 机器人焊接工作站
7、主要设备
制造设备类 筒体点焊机 全自动弯管机
7、主要设备
制造设备类 液压生产线 冲压生产线
7、主要设备
制造设备类 全自动净化器封装 窑炉
7、主要设备
测试中心-声学及NVH控制能力 传递损失测试系统
纵置发动机台架
2010
柳州海特公司成立； 湖南海特汽车部件有限公司成立
2011
北京海斯特科技有限公司成立； 哈尔滨海特汽车部件有限公司成立； 合肥海特汽车部件有限公司成立； 海特排气系统技术中心建成投入使用，并获得市级技术中心认定
2013
海特与通用全球配套体系供应商韩国DGENX公司在柳州成立合资 公司柳州海特迪桢瑟汽车部件有限公司；海特弘业催化剂有限公司成立
企业简介
目录 1、公司概况 7、主要设备
2、组织机构
3、成长历程 4、经营业绩 5、主要客户 6、主要产品 13、企业文化
8、体系认证
9、获得荣誉 10、获得专利 11、行业交流 12、精益生产
1.公司概况
1、企业简介
2.组织机构
2、组织机构
重庆海特汽车排气系统分公司分布地域图
河北海特
哈尔滨公司
7、主要设备
质量控制能力
消声器气密检测台 净化器气密检测台
质量控制能力
进料品质管制 制程品质管制 出货品质管制 品质保证 先期产品品质规划 失效模式效应分析 质 量 保 证 与 质 量 控 制 统计制程管制
合同评审
测量系统分析 计量管理 信赖性试验验证 客户抱怨管理 纠证预防 全员设备管理
品管圈活动