N1045A 60 GHz,2,4 端口,电子远程采样探头前端
Keysight TechnologiesDCA Probes AccessoriesTechnical OverviewKit consists of:Quantity Part number Description18710-15820.57 Nm (5 lb-in) torque wrench 2N1027A-1PB Remote head brackets211901C 2.4 mm male to 3.5 mm female adapter 2N9398G 1.85 mm DC block2N5520A 1.85 mm male-to-male adapter 2N5520B 1.85 mm female-to-female adapter 2N1027A-1C1 1.85 mm cable 19300-1367ESD wrist strap 19300-0980ESD ground cord 1N1027A-1ACAccessory caseRemote head brackets (N1027A-1PB)10 cm coax cables, 1.85 mm male-to-male (N1027A-1C1)2.4 male to 3.5 female adapters (11901C)ESD wrist strap (9300-1367) ESD ground cord (9300-0980)1.85 mm male-to-male adapters (N5520A)1.85 mm DC blocks (N9398G)1.85 mm female-to-female adapters (N5520B)5 lb-in torque wrench (8710-1582)N1027A-45A Accessory Kit for Remote Head Modules85058EN1027A-54FTDR CalibrationPart number Description85058B Standard mechanical calibration kit, DC-67 GHz, for 1.85 mm applications 85058E Economy mechanical calibration kit, DC-67 GHz, for 1.85 mm applications 85056A Standard mechanical calibration kit, DC-50 GHz, for 2.4 mm applications 85056D Economy mechanical calibration kit, DC-50 GHz, for 2.4 mm applications N1024BMechanical calibration kit for 3.5 mm applicationsN4694A-HFF DC-67 GHz Electronic calibration module with female 1.85 mm connectors 1N4694A-HMF DC-67 GHz Electronic calibration module with one male and one female 1.85 mm connectorN4694A-HMM DC-67 GHz Electronic calibration module with male 1.85 mm connectors 2N1027A-34F Accessory kit for 35 GHz N1055A-32F/34F TDR/TDT module N1027A-34M Accessory kit for 35 GHz N1055A-32M/34M TDR/TDT module N1027A-54F Accessory kit for 50 GHz N1055A-52F/54F TDR/TDT module N1027A-54M Accessory kit for 50 GHz N1055A-52M/54M TDR/TDT module1. Directly connects to N1055A-52M/54M remote heads.2. Directly connects to N1055A-52F/54F remote heads.N1027A-### quantities–34F –34M –54F –54M Part number Description11N4694-61002DC-67 GHz Electronic calibration module with male 1.85 mm connectors 11N4694-61003DC-67 GHz Electronic calibration module with female 1.85 mm connectors 2411901-60003 2.4 mm male to 3.5 mm female adapter 2411901-60004 2.4 mm female to 3.5 mm male adapter 185052-60014 3.5 mm male to 3.5 mm male adapter 185052-60012 3.5 mm female to 3.5 mm female adapter 185058-60113 1.85 mm male-to-male adapter 185058-60114 1.85 mm female-to-female adapter 11119300-1367ESD wrist strap 11119300-0980ESD ground wire44445022-6494Bracket for remote head11118710-17640.9 nm (8 lbs-in) torque wrench, 20 mm 11118710-17650.9 nm (8 lbs-in) torque wrench, 5/16 inch 11118121-0506USB cable (part of ECal)1 85052-60006 3.5 mm male short 1 85052-60008 3.5 mm male open 1 00902-60003 3.5 mm male load 1 85052-60007 3.5 mm female short 1 85052-60009 3.5 mm female open100902-60004 3.5 mm female load 1N1027A-2AC Accessory case 1N1027A-3AC Accessory case 1N1027A-4AC Accessory case 1N1027A-5ACAccessory caseN1027A-S32 kitQuantity Part number Description1N1075-600139/125 µm single-mode fiber, FC/PC, 5.3 m 2N1075-600172.92 mm male-to-male coaxial cable, 1 m 1N1027A-M14Quantity Part number Description1N1075-600159/125 µm single-mode fiber, FC/PC 7.1 m 1N1075-6001662.5/125 µm multimode fiber, FC/PC, 6.0 m 2N1075-600172.92 mm male-to-male coaxial cable, 1 m 11. To connect the N4877A recovered clock output to the 86100C/D trigger inputand to connect the N4877A auxiliary output with an optional 86107A precision timebase.Clock Recovery Phase Matching Cable KitsN1027A-MC1This kit provides specially matched cables that will minimize (align) clock-to-data delays and ensure accurate jitter measurements when using the N4877A external clock recovery. The N1027A-MC1 works with an 86100D with Option PTB, the N4877A external clock recovery module and the N1045A 60 GHz electrical module and/or N1055A 50 GHz TDR module.Quantity Part number Description 250 GHz pick-off211901D3.5 mm male to 2.4 mm female 1N1027-60011Cable set (4 pieces)1N1027-60009Precision time base strobe delay cable 1N1027-00001Strobe delay cable cover 1N1027-00002Strobe delay cable lid 11870-162520x100 Torx driver 11870-162310x100 Torx driver18710-17658 in-lb, 5/16 Torque wrench11901C85130-600102.4 F -3.5 M5061-531111900BAdapters and Connector SaversDescription below specifies gender of adapterPart number DescriptionN5520A 1.85 mm male to 1.85 mm male adapter/connector saver N5520B 1.85 mm female to 1.85 mm female adapter/connector saver N5520C1.85 mm female to 1.85 mm male connector saver11900A 2.4 mm male to 2.4 mm male adapter/connector saver 111900B 2.4 mm female to 2.4 mm female adapter/connector saver 111900C 2.4 mm female to 2.4 mm male connector saver 111901A 2.4 mm male to 3.5 mm male adapter 1, 211901B 2.4 mm female to 3.5 female adapter 1, 211901C 2.4 mm male to 3.5 mm female adapter 1, 211901D 2.4 mm female to 3.5 mm male adapter 1, 285130-60010 2.4 mm female to 3.5 mm male NMD bulkhead adapter 1, 283059A 3.5 mm male to 3.5 mm male adapter/connector saver 183059B 3.5 mm female to 3.5 mm female adapter/connector saver 183059C 3.5 mm female to 3.5 mm male connector saver 15062-1247 3.5 mm female bulkhead to female 3.5 mm/SMA adapter 21. 2.4 mm connectors are mechanically compatible with 1.85 mm.2. 2.92 mm connectors are mechanically compatible with3.5 mm and SMAconnectors.Examples–Use two 11901Cs to connect SMA cables to an N1045A-02F or 86108B-HBW or N4903B.–Use 5061-5311 as a connector saver for the 86112A, 54754A or 86105X electrical inputs.–Use 11900A plus 5062-1247, plus N1022B, plus 1143A to connect InfiniiMax II probes with the N1045-0xF.N9398FN4910AN1027A-PT2DC Blocks, Phase Trimmers, Cables, CapsPart number DescriptionN9398G 1.85 mm male-to-female DC block 16 V 700 kHz to 67 GHz 1N9398F 2.4 mm male-to-female DC block 16 V 50 kHz to 50 GHz 1N9398C3.5 mm male-to-female DC block 16 V 50 kHz to 26.5 GHz 2N1027A-PT2 2.4 mm male-to-female phase trimmer, range > 22 ps, IL ≤ 0.8 dB at 50 GHz 1N1027A-PT3SMA female-to-female, range > 53 ps, IL ≤ 0.8 dB at 26 GHz 2N1027A-1C1 1.85 mm coaxial male-to-male cable, 67 GHz, 10 cm 1N4910A 2.4 mm male-to-male matched coaxial cable pair, 61 cm 1N4871A 3.5 mm male-to-male matched coaxial cable pair, 91 cm 2N1027A-1CF Shipping cap to protect 1.85/2.4 mm female inputs 1N1027A-1CM Shipping cap to protect 1.85/2.4 mm male inputs 1N1027A-3CF Shipping cap to protect 2.92/3.5 mm female inputs 2N1027A-3CM Shipping cap to protect 2.92/3.5 mm male inputs 21. 2.4 mm connectors are mechanically compatible with 1.85 mm.2. 2.92 mm connectors are mechanically compatible with3.5 mm and SMAconnectors.Example–The N1045A-04F requires four N1027A-1CF caps, the N1055A-32M requires two N1027A-3CM caps.85138A8490D909D-01185140B8493CPart number Description8493C-003 3.5 mm 3 dB attenuator 8493C-006 3.5 mm 6 dB attenuator 8493C-010 3.5 mm 10 dB attenuator 8493C-0203.5 mm 20 dB attenuator8490D-003 2.4 mm 3 dB attenuator 8490D-006 2.4 mm 6 dB attenuator 8490D-010 2.4 mm 10 dB attenuator 8490D-020 2.4 mm 20 dB attenuator909D-011 3.5 mm female 50 Ω load 909D-301 3.5 mm male 50 Ω load 0960-0055 3.5 mm male short85138A 2.4 mm male 50 Ω load 85138B 2.4 mm female 50 Ω load85140A 2.4 mm male short 85140B 2.4 mm female short85141A 2.4 mm male open 85141B 2.4 mm female openAttenuators, TerminationsPower Dividers, SplittersPart number Description11636B 3.5 mm power divider, DC to 26.5 GHz 11636C2.4 mm power divider, DC to 50 GHz11667B 3.5 mm power splitter, DC to 26.5 GHz 11667C 2.4 mm power splitter, DC to 50 GHzN1000-40008N1027A-1CLN1027A-2CL86101-60017BulkheadConnector saver5061-5311N1027A-1MC/3MCRackmount Kits, ToolsPart number Description1CM030A Rackmount kit for 86100A/B/C1CP018A Rackmount kit with handles for 86100A/B/C 1CM015A Rackmount kit for 86100D1CP020A Rackmount kit with handles for 86100D8710-15820.57 nm (5 lbs-in) torque wrench 1 8710-17650.9 nm (8 lbs-in) torque wrench 2 8710-17640.9 nm (8 lbs-in) torque wrench 31. Recommended for 1.85/2.4 mm DCA connectors (e.g. N1045A, 86116C,86118A).2. Recommended for3.5 mm DCA connectors (e.g. 54754A, 86105x, 86112A).3. Recommended for DCA bulkheads (e.g. 86100x trigger input, 54754A, 86105x,86112A).ESD ProtectionPart number DescriptionN9355CK01 3.5 mm DC coupled limiter 9300-1308ESD heel strap 9300-1367ESD wrist strap 9300-0980ESD ground cord 9300-1484ESD desk matStorageSee also /find/parts Part number Description N1000-40008Front cover for 86100D 1 N1027A-1AC Accessory case 2N1027A-2AC Empty N1027A-54F accessory case N1027A-3AC Empty N1027A-54M accessory case N1027A-4AC Empty N1027A-34F accessory case N1027A-5AC Empty N1027A-34M accessory case N1027A-1MC Module storage case for N1045A module N1027A-3MC Module storage case for N1055A module N1027A-1CL Clip for two N1045A cablesN1027A-2CL Clip for two N1045A or N1055A remote heads N1027A-1PB Bracket for one N1045A or N1055A remote head 86101-60017Module filler panel for 86100A/B/C/D (1/4 bay width) 3, 41. Does not fit 86100A/B/C mainframes.2. Empty N1027A-45A case (see photo on page 2).3. Use filler panels to ensure proper airflow through the inside of modules.Otherwise the movement of air may be cut short, and components may overheat in hot environments.4. The 86100D always ships with two filler panels to fill two slots. Mini-modulesship with one filler panel.Probe amps–16 to 30 GHz (InfiniiMax III)–4 to 20 GHz (InfiniiMax III+) with InfiniiMode–Industry’s highest fidelity and accuracy–Bandwidth upgradable (InfiniiMax III)InfiniiMax III probe amps (N2800A-03A)16 GHz, 20 GHz, 25 GHz, 30 GHz N2838A25 GHz PCB ZIF probe tips (for use with N5439A)N2848AInfiniiMax III 16 GHz QuickTip headInfiniiMax III+ probe amps (N2830A-32A) 4 GHz, 8 GHz, 13 GHzN5439AZIF probe headN5440A 28 GHz 450 Ω ceramic tips N5447A 28 GHz 200 Ω ceramic tipsN5445A30 GHz browserN5444A2.92 mm/3.5 mm/SMA 28 GHz probe adapterN5441A16 GHz solder-in probe headN2836A26 GHz solder-in probe headInfiniiMax III probe adaptersN5477ASampling oscilloscope adapter N5449AHi-impedance probe adapter N5442APrecision BNC 50 Ω adapterN5443APerformance verification anddeskew fixtureInfiniiMax III/III+ probe heads and accessoriesInfiniiMax III/III+ Probing System OverviewUsing InfiniiMax III Probe with DCAs–For directly connecting to any DCA module with a 3.5 mm bulkhead connector: Use N5477A sampling oscilloscope adapter to InfiniiMax III probes.–For directly connecting to any DCA module with a 2.4 mm bulkhead connector: Use N1022B plus 85130-60010 2.4 mm (f) to 3.5 mm (m) NMD adapter.–For modules that do not have built-in probe power: Add an 1143A probe power supply with Option 001.–N5477A plus InfiniiMax III N2803A probe provides 30 GHz bandwidth.1143A85130-60010 2.4 F -3.5 MTypical 1134A configuration for 86117AQuantity Part number Description11134A 7 GHz probe amp1E2669A Differential connectivity kit 1N1022BProbe adapter185130-60010 2.4 to 3.5 mm adapter 11143A Probe power supply1Option 0015-foot power extension cable 1E2665CCalibration/deskew fixtureOscilloscope channel connection (NMD/3.5 mm)Probe amplifier connectionPower cordN5477A sample oscilloscope adapter for InfiniiMax III.Using InfiniiMax I/II/III+ Probe with DCAsRequired accessories and instruments:–For directly connecting to any DCA module with a 3.5 mm bulkhead connector: N1022B.–For directly connecting to any DCA module with a 2.4 mm bulkhead connector: N1022B plus 85130-60010.–For modules that do not have built-in probe power: A\dd an 1143A probe power supply with Option 001.–E2655C performance verification and deskew fixture for probe calibration and performance verification.Quantity Description Replacement 1Differential TDR probe —1 Pair of matched cables (1 m) N1021-600032 SMA short (m) 0960-0055 2 SMA load 50 Ω (m) 1810-01182SMA adapter (f-f) 1250-16661 Adapter to positioners(includes two 2.5 mm screws and one Allen wrench)N1021-60008 1 ESD wrist strap 9300-1367 1 ESD wrist strap ground cord 9300-0980 1 ESD warning label stickers —1 User’s Guide (either printed or on CD)—1 Box with foam insert—N1021B 18 GHz Differential TDR/TDT Probe KitOptical InterfacesDCA modules (8610XX, 8611XX, 83496X, N107XX)–Have removable connector interfaces–Ship with 81000FI FC/PC pre-installed–Compatible with 81000xI interfaces shown here (soldseparately)Internal fiber tip is mini HMS-10 ferrule–Requires patchcords with straight physical contact (DIN, E2000, FC/PC, LC, MU, SC, or ST connector)–Easy to clean – just unscrew the connector interface81000LI – LC81000KI – SC81000HI – E200081000MI – MU81000SI – DIN4108/4725681000VI – ST81000FI – FC/PC(Ships standard with all optical inputs on modules for the DCA family)Training Tools and DevicesAvailable from /find/partsPart number DescriptionN1040-66410DR/TDT, equalization and de-embedding demo boardAppendix: DCA Input ConnectorsProduct Probe power 2.92 mm 3.5 mm 2.4 mm 1.85 mm Optical Comment54754A Yes f/f CS83496B No f/f CS FC/PC nut86100C/D No f/f CS f/f CS 2.92 mm with Option PTB 86105C No f/f CS FC/PC nut86105D No f/f CS f/f CS FC/PC nut 2.4 mm with Option 281 86107A No f/f CS f/f CS 2.4 mm only on 40 GHz input 86108A Yes f/f CS86108B Yes f/f CS f/f CS 2.4 mm only on 50 GHz input 86112A Yes f/f CS86115D No FC/PC nut86116C No m fixed FC/PC nut86117A No f/f CS86118A No f fixedN1045A-xxF No f fixedN1045A-xxM No m fixedN1055A-xxF No f fixed f fixed 1.85 mm with Options 5xx N1055A-xxM No m fixed m fixed 1.85 mm with Options 5xx f/f CS Female/female connector saver (bulkhead is male, customer can remove connector saver)m/m CS Male/male connector saver (bulkhead is female, customer can remove connector saver)f fixed Female fixed interfacem fixed Male fixed interfaceFC/PC nut 86100FI straight FC/PC interface (customer can exchange it with other interfaces, see Optical Interfaces on page 11)Appendix: RF/Microwave Connectors3.5 mm connectorThe 3.5 mm connector was primarily developed at Hewlett Packard (now Keysight Technologies, Inc.) with early manufacturing at Amphenol. Its design strategy focused on highly-rugged physical interfaces that would mate with popular SMA dimensions, allowing thousands of repeatable connections. It is mode-free to 34 GHz.2.92 mm connectorThe 2.92 mm connector mates with SMA and 3.5 mm connectors and offers mode-free performance to 40 GHz.2.4 mm connectorThe 2.4 mm connector was developed by Hewlett Packard, Amphenol, and M/A-COM for use to 50 GHz. This design eliminates the fragility of the SMA and 2.92 mm connectors by increasing the outer wall thickness and strengthening the female fingers. It can mate with SMA, 3.5 mm and 2.92 mm, with the use of precision adapters. The 2.4 mm product is offered in three quality grades: general purpose, instrument, and metrology. General-purpose grade is intendedfor economy use on components, cables, and microstrip where limited connections and low repeatability is acceptable. Instrument-grade is best suited for measurement applications where repeatability and long life are primary considerations. Metrology-grade is best suited for calibration applications where the highest performance and repeatability are required.1.85 mm connectorThe 1.85 mm connector was developed in the mid-1980s by Hewlett Packard (now Keysight Technologies, Inc.) for mode-free performance to 65 GHz. Hewlett Packard offered its design as public domain in 1988 to encourage standardization of connector types; a few devices are available from various manufacturers for research work. The 1.85 mm connector mates with the 2.4 mm connector and has the same ruggedness. In recent years, the 1.85 mm connector has been optimized to operate mode-free to 67 GHz.Appendix: Literature ReferencesPublication title Publication number5990-5824EN Infiniium DCA-X 86100D Wide-Bandwidth Oscilloscope Mainframe andModules - Data Sheet(/find/dcax)5990-8661ENRF and Microwave Test Accessories Catalog 2012/2013 - Catalog(/find/mta)Using the Keysight N5477A Sampling Oscilloscope Adapter N5477-97000AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is anopen standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group.LAN eXtensions for Instruments puts the power of Ethernet and theWeb inside your test systems. Keysight is a founding member of the LXI consortium.PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers arugged, PC-based high-performance measurement and automation system.This information is subject to change without notice.© Keysight Technologies, 2013 - 2016Published in USA, January 27, 20165991-2340ENFor more information on KeysightTechnologies’ products, applications or services, please contact your local Keysight office. The complete list is available at:/find/contactus Americas Canada (877) 894 4414Brazil 55 11 3351 7010Mexico001 800 254 2440United States (800) 829 4444Asia Pacific Australia 1 800 629 485China800 810 0189Hong Kong 800 938 693India 1 800 11 2626Japan 0120 (421) 345Korea 080 769 0800Malaysia 1 800 888 848Singapore 1 800 375 8100Taiwan0800 047 866Other AP Countries (65) 6375 8100Europe & Middle East Austria 0800 001122Belgium 0800 58580Finland 0800 523252France 0805 980333Germany 0800 6270999Ireland 1800 832700Israel 1 809 343051Italy800 599100Luxembourg +32 800 58580Netherlands 0800 0233200Russia 8800 5009286Spain 800 000154Sweden 0200 882255Switzerland0800 805353Opt. 1 (DE)Opt. 2 (FR)Opt. 3 (IT)United Kingdom0800 0260637For other unlisted countries:/find/contactus(BP-01-01-16)/go/quality Keysight Technologies, Inc.DEKRA Certified ISO 9001:2008 Quality Management SystemmyKeysight/find/mykeysightA personalized view into the information most relevant to you.Three-Year Warranty/find/ThreeYearWarrantyKeysight’s committed to superior product quality and lower total cost of ownership. Keysight is the only test and measurement company with athree-year warranty standard on all instruments, worldwide. And, we provide a one-year warranty on many accessories, calibration devices, systems and custom products.Keysight Assurance Plans/find/AssurancePlansUp to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements.Keysight Infoline/find/serviceKeysight’s insight to best in class information management. Free access to your Keysight equipment company reports and e-library.Keysight Channel Partners/find/channelpartnersGet the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience./find/mta /find/dcaxFrom Hewlett-Packard through Agilent to KeysightFor more than 75 years, we‘ve been helping you unlock measurement insights. Our unique combination of hardware, software and people can help you reach your next breakthrough.Unlocking measurement insights since 1939.1939 THE FUTURE。
科达招投标软硬件技术参数V13
【科达招投标软硬件技术参数】[Fred]Version: 1.3 History2022/04/12 V1.0 Fred Doc creation2022/04/14 V1.1 Liu Yong Revised version2022/06/12 V1.2 Fred Revised version, smart pen added2022/06/13 V1.3 Fred Revised version, teacher terminal parameter added目录1 描述 (3)2 硬件系统 (3)2.1 智慧课堂平台服务器 (3)2.2 校园内网交换机 (3)2.3 教室AP (3)2.4 教室充电柜 (3)2.5 教师备授课系统终端 (4)2.6 学生学习系统终端 (5)2.7 学生智能手写笔终端 (6)2.8 教师授课学习终端终端 (6)3 软件系统功能和参数指标 (6)3.1 教师备授课系统 (6)3.2 学生学习系统 (7)3.3 安全管控系统 (8)3.4 教务管理系统 (8)3.5 数据采集统计系统 (8)3.6 第三方软件支持系统 (8)曼黯!描述以下为根据科达ESWI 智慧教育系统2.0 软硬件功能生产的参数指标和功能点，用于招投标方案的标书技术部份。
硬件系统2.1 智慧课堂平台服务器外型：2U 机架式处理器：配置E5-2620v4(2.1GHz/8c)/8GT20ML3内存：配置32GB DDR3 内存,20 个内存插槽，支持高级内存纠错、内存镜像、内存热备等高级功能；硬盘：配置4 块1000G SAT“插拔硬盘，最大支持24 个2.5 寸或者12 个3.5 寸SATA/SAS/SSD 硬盘，可内置2 小盘。
RAID 独立RAID 控制器，支持RAID0,1,3,5。
I/O 扩展槽：主板支持6 个PCI-E 插槽网络：配置双口千兆以太网控制器，支持虚拟化加速、网络加速、负载均衡、冗余等高级功能；电源：服务器专用电源；2.2 校园内网交换机24 个10/100/1000Base-T 支持PoE4 个独立千兆SFP 端口整机最大PoE 供电功率为370W,单端口最大PoE 供电功率为30W支持RIP 动态路由、静态路由、ARP 代理、DHCP 服务器、DHCP 中继、DHCP Snooping支持四元绑定、ARP/IP/DoS 防护、802.1X 认证支持VLAN、QoS、ACL、生成树、组播、IPv62.3 教室AP11AC 双频并发，无线发射功率线T 可调，自适宜信道，802.3af/at 标准PoE 供电频谱导航，胖瘦一体。
深信服万兆应用防火墙招标参数
多个内部地址映射到同一个公网地址、多个内部地址映射到多个公网地址、内部地址到公网地址一一映射、源地址和目的地址同进转换、外部网络主机访问内部服务器、支持DNS映射功能可配置支持地址转换的有效时间
支持多种NAT1AG,包括DNS、FTP、H323、S1P等
IPSecVPN功能
支持AHESP协议、手工或通过IKE自动建立安全联盟、ESP支持DES、3DES、AES>国密办算法多种加密算法支持MD5及SHA-I验证算法
双因素认证
支持经USB-key方式实现又因素身份认证
IP、MAC认证
支持IP认证、MAC认证、及IP/MAC绑定认证等
单点登录
支持AD、POP3、ProXy单点登录，简化用户操作
可强制指定用户、指定IP用户必须使用单点登录
账户导入
支持从本地导入和扫描导入，支持以文本导入账户/分组/IP/MAC/描述/密码等信息
ActiveX过滤
支持基于签名证书的ACtiVeX过滤；支持添加白名单和合法网站列表；支持基于应用类型的ACtiVeX过滤，如视屏、、娱乐等
脚本过滤
支持基于操作类型的脚本过滤，如注册表读写、文凭读写、、威胁对象调用、恶意图片等
用户管理
本地认证
支持触发式Web认证，静态用户名密码认证等
第三方认证
支持1DAP、Radius、POP3、PrOXy等第三方认证
抗攻击特性
防御1and、Sumrf>Fragg1e、WinNUke、PingofDeathsTearDrop>IPSPoofing、SYNF1ood>ICMPF1ood>UDPFIOod、DNSQueryF1ood.ARP欺骗攻击防范、ARP主动反向查询、TCP报文标志位不合法攻击防范、支持IPSYN速度限制、超大ICMP报文攻击防范、地址/端口扫描的防范、DoS/DDoS攻击防范、ICMP重定向或不可达到报文控制等功能。此外还支持静态和动态黑名单功能、MAC和IP绑定功能
西宁市公安局城中公安分局技术用房信息化(综合布线)系统设备参数
序号设备名称规格参数单位数量A-1六类屏蔽信息模块 1、RJ45六类屏蔽模块用于六类链路2、RJ45六类屏蔽模块的打线部分设计有保护盖，在恶劣环境中保护内部IDC触点正常工作。
3、RJ45六类屏蔽模块连接片采用镀金铜铍合金；IDC采用铜磷合金，须和网线同一品牌4、模块材料使用镀锡铜合金制成。
RJ45六类屏蔽模块规格：（1） 直流电阻：≤ 0.3Ω，（2）绝缘阻抗：不低于500MΩ，（3） 拔插寿命：≥ 700次，（4）端接寿命：≥ 200次，（5）接点阻抗：≤ 20mΩ，（6）电流：1.5A，须和网线同一品牌个360A-2单口信息面板 1、面板上可以混合安装RJ45非屏蔽模块、RJ45屏蔽模块、语音模块。
2、86型结构，前后可双向拆卸模块，可以安装在国标86型底盒上。
3、模块框架可从面板正面、背面双向拆卸，方便更换模块且不损伤相邻缆线4、要求面板为86型，采用双层面板结构，以便与强电面板匹配。
5、面板上要求带有滑盖式永久防尘盖6、面板要求带有有机玻璃标签框，在对标签具有良好保护的同时，便于更换标签。
7、面板须和网线同一品牌个360A-3六类跳线3米(信息面板到桌面）1、屏蔽链路应使用RJ45-RJ45型屏蔽原装跳线。
2、铜缆跳线所用对绞缆线要求为多股双绞线，不允许使用单股线。
3、所有跳线的两端须具有接头护套，两端护套颜色必须一致。
4、长度：3米。
5、颜色：蓝色。
条360A-4六类屏蔽双绞线 1.缆线要求外护套采用PVC材料,外护套为蓝色护套2.双绞线均采用紧护套型双绞线3.六类屏蔽双绞线绝缘材料采用HDPE，芯线材料为五氧铜,芯线直径为0.57mm4.六类屏蔽双绞线的主要技术规格：（1）芯线规格：AWG 23；（2）测试带宽：≥ 250Hz；（3）近端串扰：≥ 38.3dB/250MHz；（4）直流电阻：≤ 9.5Ω；5）线缆外径：≥6.3mm，每箱长度≥305米。
5、六类屏蔽双绞线须提供厂家出具质保承诺书.箱70A-524口六类配线架1、水平屏蔽配线子系统中的配线架应采用跳接式配线架。
安全感知管理平台技术参数及功能要求
联动行为管理
支持联动原有行为管理设备，支持上网行为管理做资产用户名对接，精准识别终端资产责任人。（需提供截图打印加盖原厂公章证明）
★支持联动原有行为管理设备，支持与行为管理设备的联动，包含上网提醒、冻结账号等（需提供截图打印加盖原厂公章证明）
事后异常行为检测
具备元数据行为分析引擎：httpflow、dnsflow、adflow、icmpflow、maillflow等, 通过异常行为分析，结合各类机器学习算法完成未知威胁检测。包括：内网穿透、代理、远控、隧道、反弹shell等事后检测场景。
先进性
证明
为保障安全服务效果，满足数据和网络安全要求，所投态势感知平台产品厂商需通过可信云评估，提供相应的可信云认证报告
提供三年原厂质保及原厂免费现场服务，产品的安装、培训由原厂工程师完成实施。
二、
功能项
功能要求说明
性能规格
性能参数：网络层吞吐量≥1Gbps，应用层吞吐量≥500Mbps。
硬件参数：规格≥1U，内存大小≥8G，硬盘容量≥128G SSD，电源：单电源，接口：支持不低于6千兆电口+4千兆光口SFP。
配置要求
挖矿专项检测
支持挖矿专项检测页面，具备挖矿攻击事前、事中和事后全链路的检测分析能力，综合运用威胁情报、IPS特征规则和行为关联分析技术，如检测发现文件传输（上传下载）阶段的异常，对挖矿早期的准备动作即告警。
平台内置挖矿安全知识库，对常见的挖矿如：Bluehero挖矿蠕虫变种、虚拟货币挖矿、EnMiner挖矿病毒、PowerGhost挖矿病毒、DDG挖矿病毒、Docker挖矿、DDG挖矿变种、GroksterMiner挖矿病毒、Linux 挖矿木马、ZombieBoy挖矿木马等提供详细的背景介绍、感染现象、详细分析、相关IOC（MD5、C2、URL）、解决方案。
序号产品名称、品牌、型号
1 自动道闸/PEAKE/PK-RB1330/S-GN
1
2 数字式车辆检测器/PEAKE/PK-CD5000
2
3 出门控制机/PEAKE/PK-3650W/PC10-SD
1
2.3.2南门设备
1 自动道闸/PEAKE/PK-RB1330/S-GN
1
2 数字式车辆检测器/PEAKE/PK-CD5000
2
1
7 钢管/国标
1
8 辅材/中安/定制
1
1.2周界防范系统
1 报警主机/霍尼韦尔/VISTA120
1
2 泄漏入侵探测系统主机+埋地泄漏探测器/安警/AJ100II
5
3 泄漏电缆/安警/AJ100II-L
600
4 辅材/中安/定制
1
5 4光束智能红外对射/艾礼富/ABH-100S
10
6 对射专用不锈钢支架/中安/定制
44
2.1.3视频显 示设备
1 46寸液晶拼接单元/宇视/MW5246-H
12
2 拼接控制器/淳中/HADES-380
1
3 大屏底座及辅材/宇视/定制
1
4 8路高清解码器/宇视/VS-DC2808-FH-UV
2
2.1.4金鸡岭 监控室
1 操作台/图腾/定制
1
2 机柜/图腾/A26642
3
3 UPS/山特/C3KS
1
6 机柜/图腾/A2662217 电源线/帝一/RVV2*1.0
1
8 网线/帝一/UTP6
1
9 辅材/中安/定制
1
3 3T硬盘/宇视/VS-HD3000V-NVR-UV
1.1.3视频显示设备
1 55寸液晶拼接单元/宇视/MW5255-H
国家工程实验室621系列数据采集设备说明书
Manufacturer: National InstrumentsBoard Assembly Part Numbers (Refer to Procedure 1 for identification procedure): Part Number and Revision Description194710A-04 or later USB-6210194710A-03 or later USB-6211196203A-03L or later USB-6211 OEM197493A-03L or later USB-6212198402A-03L or later USB-6212 MASS TERMINATION190630A-01L or later USB-6212 BNC197504A-03L or later USB-6212 OEM194710A-02 or later USB-6215197493A-01L or later USB-6216198402A-01L or later USB-6216 MASS TERMINATION190631A-01L or later USB-6216 BNC197504A-01L or later USB-6216 OEM194710A-01 or later USB-6218190632A-01L or later USB-6218 BNC196203A-01L or later USB-6218 OEMVolatile MemoryTarget Data Type Size BatteryBackupUser1AccessibleSystemAccessibleSanitizationProcedureGlue logic FPGA 1 AlteraEP1C3No No Yes Cycle PowerGlue logic FPGA 2 XilinxXC3S500ENo No Yes Cycle Power Program Code SRAM 128 KB No No Yes Cycle Power Non-Volatile Memory (incl. Media Storage)Target Data Type Size BatteryBackupUserAccessibleSystemAccessibleSanitizationProcedureDevice configuration •Device information •Calibration metadata2•Calibration data EEPROM 2 KB NoNoYesNoYesYesYesNoneProcedure 2None1 Refer to Terms and Definitions section for clarification of User and System Accessible2 Calibration constants that are stored on the device include information for the device’s full operating range. Any implications resulting from partial self-calibration can be eliminated by running the full self-calibration procedure.ProceduresProcedure 1 –Board Assembly Part Number Identification:To determine the Board Assembly Part Number and Revision, refer to the “P/N” label applied to the surface of your product as shown below. The Assembly Part Number should be formatted as “P/N: ######a-vvL” where “a” is the letter revision of the Board Assembly (eg. A, B, C…) and the “vv” is the type identifier. If the product is RoHS compliant, “L” can be found at the end of the part number.USB-6210/6211/6212/6215/6216/6218/6212 MASS TERMINATION/6216 MASS TERMINATION – Label can be found on the bottom of the enclosure.USB-6211 OEM/6218 OEM – Primary SideUSB-6212 OEM/6216 OEM – Secondary SideUSB-6212 BNC/6216 BNC/6218 BNC – Label can be found on the bottom of the enclosure.Procedure 2 – Device Configuration EEPROM (Calibration Metadata):The user-accessible areas of the Device Configuration EEPROM are exposed through a calibration Applications Programming Interface (API) in LabVIEW. To clear the Calibration Metadata area, complete the following steps:1.To clear the calibration password, use the DAQmx Change External Calibration Password.vi tooverwrite the current password of the device you wish to clear.2.The user-accessible area of the Device Configuration EEPROM can be cleared using the NI DAQmx API.For instructions on how to clear these areas, go to /info and enter info code DAQmxLOV.Terms and DefinitionsCycle Power:The process of completely removing power from the device and its components and allowing for adequate discharge. This process includes a complete shutdown of the PC and/or chassis containing the device; a reboot is not sufficient for the completion of this process.Volatile Memory:Requires power to maintain the stored information. When power is removed from this memory, its contents are lost. This type of memory typically contains application specific data such as capture waveforms.Non-Volatile Memory:Power is not required to maintain the stored information. Device retains its contents when power is removed.This type of memory typically contains information necessary to boot, configure, or calibrate the product or may include device power up states.User Accessible:The component is read and/or write addressable such that a user can store arbitrary information to the component from the host using a publicly distributed NI tool, such as a Driver API, the System Configuration API, or MAX. System Accessible:The component is read and/or write addressable from the host without the need to physically alter the product. Clearing:Per NIST Special Publication 800-88 Revision 1, “clearing” is a logical technique to sanitize data in all User Accessible storage locations for protection against simple non-invasive data recovery techniques using the same interface available to the user; typically applied through the standard read and write commands to the storage device.Sanitization:Per NIST Special Publication 800-88 Revision 1, “sanitization” is a process to render access to “Target Data” on the media infeasible for a given level of effort. In this document, clearing is the degree of sanitization described.。
智能电表的设计
四川理工学院课程设计书学院计算机学院专业物联网工程20121班课程无线传感器网络题目现代小区智能电表课程设计教师符长友学生胥玉环刘依粒胡伟杰宋治桦设计时间：2014年7月5日至2017年7月11日前言近年来，在低碳经济、绿色节能及可持续发展思想的推动下，如何进一步提高电网效率，积极应对环境挑战，提高供电可靠性和电能质量，完善电力用户服务，适应更加开放的能源及电力市场化环境需要，对未来电网的发展提出了更高的要求。
智能电网的概念应运而生并成为全球电力行业共同研究和探讨的热点，支撑中国乃至全球智能电网的将是通信技术、信息处理技术和控制技术。
智能电表作为智能电网建设的重要基础装备，加快智能电表产业链整合，促进其产业化，对于电网实现信息化、自动化和互动化具有支撑作用。
基于以上分析，本文研究旨在基于AT89C51单片机的智能电表的设计。
本次设计基于单片机AT89C51是以微处理器或微控制器芯片为核心的可以存储大量的测量信息并具有对测量结果进行实时分析、综合和做出各种判断能力的仪器。
一般具有自动测量功能，强大的数据处理能力，进行自动调零和单位换算功能，能进行简单的故障提示，具有操作面板和显示器，有简单的报警功能。
本文主要包括以下三个方面的工作：(1)智能电表的设计背景、优点及发展现状本文首先分析智能电表的设计背景，其次讨论智能电表的优点及相关的应用。
(2)智能电表的硬件和软件实现分析智能电表应该具备的功能，给出该仪表的总体设计框图；详细讨论了该电路的核心芯片选取、数据采集电路的设计、通信电路及输入输出系统的实现并给出了核心芯片．AT89C51的详细参数；使用结构化程序设计手段，利用单片机C语言程序实现按键的扫描并处理程序、数据的采集及后续的算法程序、红外或RS485通信方式的自动抄表程序、CPU卡的读写操作程序以及段式LCD的显示驱动程序。
(3)设计的结论分析、不足及未来的展望阐述了设计的测试结果并对结论进行了分析，给出了设计中的不足之处，并提出了将来的修改意见及改进之处，对智能电表的未来进行展望。
24口千兆交换机参数
16
17
24口千兆交换机招标参数
序号 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 功能及技术指标 ★交换容量≥250Gbps ★转发性能≥50Mpps ★固化10/100/1000M以太网端口≥24，千兆SFP光接口≥4个，同时可 用千兆口≥28 ★配置及日志存储等简化维护和管理，USB端口≥1个 支持链路协测功能，可快速检测链路的通断和光纤链路的单向性 ， 并支持端口下的环路检测功能，防止端口下因私接Hub 等设备形成的 环路而导致网络故障的现象 ★支持流镜像功能 ★支持IPv4和IPv6的三层路由功能 支持IPv4组播、IPv6组播，防止虚假应标，保留测试权利 支 持 DHCP Client 、 DHCP Relay 、 DHCP Snooping 、 DHCP Snooping Trust ★支持 IPv4 ACL ，配置支持源 / 目的 IPv6 地址、源 / 目的端口的硬件 IPv6 ACL，ACL80 支 持 Private VLAN ， protocol based VLAN ， Guest VLAN ， Share vlan，Voice Vlan ★支持抗攻击，支持CPU限速功能，能限制非法报文对CPU的攻击，保 护交换机工作的稳定性 ★所投设备能检测到攻击源，并将攻击源隔离，保护交换机工作的稳 定性 ★支持 Web 认证功能，并 802.1X 、 IPv4/IPv6 ACL 同时开启，防ARP 欺骗，CPU保护功能同时开启，不会相互冲突、制约 ★要求所投设备具备良好的扩展性，要求所投设备支持堆叠且单向堆 叠带宽≥2.5G ★支持ARP防欺骗的功能，在交换机端口启用802.1X和WEB认证功能的 前提下，能够禁止非法用户的ARP欺骗报文，保护合法用户免受其 害，防止合法用户的数据被窃取。提供工信部（原信息产业部）测试 报告复印件证明。 支持 SNMPv1/v2C/v3 、 CLI(Telnet/Console) 、 RMON(1,2,3,9) 、 SSH、 Syslog、NTP/SNTP 备注
伊顿 YHQ60系列 防爆球型云台摄像机 数据表
产品概述经久耐用，防腐蚀性能卓越，专为防爆及严苛条件而设计。
其广泛应用于包括陆地及海洋石油天然气，远洋船舶，风力发电，化工等对于产品和持久使用的可靠性有着超高要求的领域。
支持360º 连续水平旋转及0º ~+90º 垂直旋转，对周围环境一览无余。
0.1°/S 至300°/S可调节水平旋转速率，快速捕捉目标。
遵循ONVIF协议。
配备多样安装支架，YHQ60适用于最严苛的视频监控的应用。
产品特性• CNEx 认证• IP66/68• 1080p网络高清• 可变焦距• 遵循ONVIF协议• 支持360º 连续水平旋转，90º垂直旋转• 可调节水平转动速率 0.1°/S ~ 300°/S• 支持电压110~240VAC 或 24VAC • 标准以太网连接•壁挂安装YHQ60系列防爆球型云台摄像机气体粉尘防爆双认证All specifications, dimensions, weights and tolerances are nominal (typical) and Eaton reserve the right to vary all data without prior notice.No liability is accepted for any consequence of use.EatonNo.189, Liuyanghe road Xinbei district Changzhou Jiangsu, China********************© 2023 EatonAll Rights Reserved Printed in UK PublicationNo.DSYH0012/ October 2023Eaton is a registered trademark.All other trademarks are property of their respective owners.分辨率2304x1296 30fps镜头22倍光学变焦5.2-114.4mm F1.5-F3.8最小照度0.002lux(F1.5，AGC ON，彩色) 0.001lux(F1.5，AGC ON，黑白)视频流H.265、H.264、MJPEG特性BLC, AGS, AWB, WDR, DNR, OSD, 日夜自动/彩色/黑白 (IR-Cut filter removeable)协议标准TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, SNMP, FTP, 802.1x, QoS, HTTPS, IPv6智能功能移动侦测, 越界侦测, 区域入侵侦测, 离开区域侦测摄像机选项 V33倍三百万像素图像传感器逐行扫描 CMOS 1/2.8"分辨率2304x1296 30fps镜头33倍光学变焦4.5-148mm F1.5-F4.0最小照度0.002lux(F1.5，AGC ON，彩色) 0.001lux(F1.5，AGC ON，黑白)视频流H.265、H.264、MJPEG特性BLC, AGS, AWB, WDR, DNR, OSD, 日夜自动/彩色/黑白 (IR-Cut filter removeable)协议标准TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, SNMP, FTP, 802.1x, QoS, HTTPS, IPv6智能功能移动侦测, 越界侦测, 区域入侵侦测, 离开区域侦测摄像机选项 W22倍五百万像素图像传感器逐行扫描CMOS 1/2.7”分辨率2880x1620 30fps镜头22倍光学变焦5.2-114.4mm F1.5-F3.8最小照度0.003lux(F1.5，AGC ON，彩色) 0.001lux(F1.5，AGC ON，黑白)视频流H.265、H.264、MJPEG特性BLC, AGS, AWB, WDR, DNR, OSD, 日夜自动/彩色/黑白 (IR-Cut filter removeable)协议标准TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, SMTP, NTP, UPnP, SNMP, FTP, 802.1x, QoS, HTTPS, IPv6智能功能移动侦测, 越界侦测, 区域入侵侦测, 离开区域侦测DSYH0012/ 10/23摄像机高清网络编码I护罩类型光学摄像机护罩编码V热成像镜头无编码 N热成像摄像机机芯无编码 N雨刮无雨刮编码 N摄像机系统网络高清编码 I认证CNEx 非防爆编码 X N温度-20˚C ~ +60˚C 编码1YHQ60 A C V N I U N N I 2 1 D X 1 0 1材质类型不锈钢304不锈钢316L编码A B引出线长度3米非铠装7米非铠装10米非铠装3米铠装7米铠装10米铠装编码1231A 2A 3A输入电压24VAC ±10%110~240VAC ±10%编码12摄像机旋转连续旋转编码 1传输方式标准版编码0订购详情如下编码能帮助您找到合适的型号。
数字化X射线摄影系统产品技术要求深圳蓝韵
2.5.4预览时间
型号
Wiser-01
Wiser-02
Wiser-03
CXDI-401G
COMPACT
CXDI-401G
Wireless
预览时间
≤11s
≤9s
≤12s
≤5s
≤5s
2.6高压电缆及插头、插座
应符合GB/T 10151-2008的规定。
2.7
2.7.1
应整齐、表面整洁、色泽均匀，不得有伤斑、裂缝等缺陷。
见下表：
型号
Wiser -01
Wiser-02
Wiser -03
CXDI-401G
COMPACT
CXDI-401G
Wireless
影像均匀性
≤2.2%
≤2.2%
≤2.2%
≤2.2%
≤2.2%
2.3.4
实际有效成像区域应大于探测器有效成像区域标称值的95%。
型号
Wiser -01
Wiser-02
Wiser -03
5％；
立柱水平运动
手动控制，电磁锁止， 运动行程≥
1400mm
手动控制，电磁锁止，运动行程≥
1500mm
立柱旋转
手动控制，机械锁
止，旋转范围不小于±180°
手动控制，机械锁
止，旋转范围不小于±180°
2.4.2
X射线管组件密封应良好，无渗油现象。
2.4.3
a）限束器启闭应轻便、灵活、可靠；
b）最小X射线辐射野应符合GB9706.12-1997中29.202.4a)的规定，在距焦点1m处垂直于基准轴的平面上,可选择X射线野最小尺寸，其长、宽不超过5cm；
标尺
手动控制，电磁锁止 ， 转 动 范 围