PET印刷膜ROHS测试报告

合集下载

rohs测试报告

rohs测试报告

rohs测试报告:对环保产品的必要性是针对电子电器设备而言的。

随着时代的发展,人们对生态环境保护意识逐渐增强,对环保产品的要求也越来越高。

就是一项检测标准,涵盖了特定物质和元素的含量限制,如铅、汞、镉、六价铬、多溴联苯等。

ROHS测试要求产品不能出现这些元素的含量超标,且测试结果要公开透明。

与环保产品联系密切,下面将对的必要性与优势进行探讨。

一、的必要性1.法律要求ROHS是Restriction of Hazardous Substances的缩写,意为有害物质限制。

这项标准是在2003年7月1日由欧洲议会发布的,旨在限制电子电器产品中有害物质的使用。

自从标准产生之后,逐渐被各国广泛推广。

一些国家和地区还产生了具有相似意义的标准,如日本的JIS C 0950和中国的QC 080000,都规范了产品中可使用有害物质的种类和含量。

在欧盟、美国和中国等国家和地区,ROHS测试已成为一项法律要求。

因此,如果企业想要进入这些市场,就必须严格遵守ROHS标准,并通过ROHS测试获得。

2.符合环保意识并不仅仅是一项法律要求,它更多的是符合当今世界上人们追求绿色环保的社会意识。

环境影响评估(EIA)显示,线路板污染导致全球大约有80%的电子垃圾无法得到回收。

因此,企业如果可以减少电子电器产品中有害物质的使用,对于环保是至关重要的。

二、的优势1.增加产品的市场竞争力是迈向国际市场不可或缺的一步。

随着各国环保法规的加强,消费者对产品的质量和绿色度的要求越来越高。

如果企业可以通过ROHS测试,取得,可以增强企业的公信力和产品的市场竞争力。

2.降低企业的成本通过ROHS测试,可以降低企业的产品质量问题出现的概率。

有害物质降低的同时,产品的运营寿命也相应增加,有利于企业维护自身的声誉和客户的信任。

长期来看,ROHS测试的过程可以帮助企业优化产品设计,提高生产效率,从而降低企业的成本以及时效性。

3.逐步进入本地市场是进入欧美等国际市场的必要条件,同样也是进入本地市场的一步必要过程。

PET薄膜(ROHS+卤素+PFOS+TBBPA+HBCDD+邻苯二甲酸酯)报告[1]

PET薄膜(ROHS+卤素+PFOS+TBBPA+HBCDD+邻苯二甲酸酯)报告[1]

Test Report No.: GZ1001004486/CHEM Date: JAN 21, 2010 Page 1 of 14 SICHUAN DONGFANG INSULATING MATERIAL CO.,LTD.NO.6 DONGXING RD., MIANYANG, SICHUAN, CHINAThe following sample(s) was/were submitted and identified on behalf of the applicant as Polyester Terephthalate FilmSGS Job No. : GZ12351182ECSGS Internal Reference No. : 2.1Date of Sample Received : JAN 14, 2010Testing Period : JAN 14, 2010 TO JAN 19, 2010Test Requested : Selected test (s) as requested by client.Test Method : Please refer to next page(s).Test Result(s) : Please refer to next page(s).Conclusion : A: Based on the performed tests on submitted sample(s), the results complywith the RoHS Directive 2002/95/EC and its subsequent amendments. Signed for and on behalf ofSGS-CSTC Ltd.______________________Manson YangSr. EngineerTest ReportNo.: GZ1001004486/CHEMDate: JAN 21, 2010Page 2 of 14Test Results:Description for specimen 1 : Transparent plastic sheetA: RoHS Directive 2002/95/ECTest Item(s) Unit Test Method (Reference) Result MDL Limit Cadmium (Cd) mg/kg IEC 62321: 2008, ICP-OES N.D. 2 100 Lead (Pb) mg/kg IEC 62321: 2008, ICP-OES N.D. 2 1000 Mercury (Hg)mg/kg IEC 62321: 2008, ICP-OES N.D. 2 1000 Hexavalent Chromium (CrVI) by alkaline extraction mg/kg IEC 62321: 2008, UV-Vis N.D. 2 1000 Sum of PBBsmg/kg -N.D. - 1000 Monobromobiphenyl mg/kg IEC 62321: 2008, GC-MS N.D. 5 Dibromobiphenyl mg/kg IEC 62321: 2008, GC-MS N.D. 5 Tribromobiphenyl mg/kg IEC 62321: 2008, GC-MS N.D. 5 Tetrabromobiphenyl mg/kg IEC 62321: 2008, GC-MS N.D. 5 Pentabromobiphenyl mg/kg IEC 62321: 2008, GC-MS N.D. 5 Hexabromobiphenyl mg/kg IEC 62321: 2008, GC-MS N.D. 5 Heptabromobiphenyl mg/kg IEC 62321: 2008, GC-MS N.D. 5 Octabromobiphenyl mg/kg IEC 62321: 2008, GC-MS N.D. 5 Nonabromobiphenyl mg/kg IEC 62321: 2008, GC-MS N.D. 5 Decabromobiphenyl mg/kg IEC 62321: 2008, GC-MSN.D. 5 Sum of PBDEsmg/kg -N.D. - 1000 Monobromodiphenyl ether mg/kg IEC 62321: 2008, GC-MS N.D. 5 Dibromodiphenyl ether mg/kg IEC 62321: 2008, GC-MS N.D. 5 Tribromodiphenyl ether mg/kg IEC 62321: 2008, GC-MS N.D. 5 Tetrabromodiphenyl ether mg/kg IEC 62321: 2008, GC-MS N.D. 5 Pentabromodiphenyl ether mg/kg IEC 62321: 2008, GC-MS N.D. 5 Hexabromodiphenyl ether mg/kg IEC 62321: 2008, GC-MS N.D. 5 Heptabromodiphenyl ether mg/kg IEC 62321: 2008, GC-MS N.D. 5 Octabromodiphenyl ether mg/kg IEC 62321: 2008, GC-MS N.D. 5 Nonabromodiphenyl ether mg/kg IEC 62321: 2008, GC-MS N.D. 5 Decabromodiphenyl ether mg/kgIEC 62321: 2008, GC-MSN.D.5Note:1. mg/kg = ppm2. N.D. = Not Detected (< MDL)3. MDL = Method Detection Limit4. "-" = Not regulatedTest Report No.: GZ1001004486/CHEM Date: JAN 21, 2010 Page 3 of 14B: Phthalate(s)Test Item(s) Unit Test Method (Reference) Result MDL Dimethyl Phthalate (DMP) %(w/w) EN14372: 2004, GC-MS N.D. 0.005 Diethyl Phthalate (DEP) %(w/w) EN14372: 2004, GC-MS N.D. 0.005 Dibutyl Phthalate (DBP) %(w/w) EN14372: 2004, GC-MS N.D. 0.003 Benzylbutyl Phthalate (BBP) %(w/w) EN14372: 2004, GC-MS N.D. 0.003Di-(2-ethylhexyl) Phthalate (DEHP) %(w/w) EN14372: 2004, GC-MS N.D. 0.003 Diisononyl Phthalate (DINP) %(w/w) EN14372: 2004, GC-MS N.D. 0.01Di-n-octyl Phthalate (DNOP) %(w/w) EN14372: 2004, GC-MS N.D. 0.003 Diisodecyl Phthalate (DIDP) %(w/w) EN14372: 2004, GC-MS N.D. 0.01 Diisobutyl Phthalate (DIBP) %(w/w) EN14372: 2004, GC-MS N.D. 0.005 Dinonyl Phthalate (DNP) %(w/w) EN14372: 2004, GC-MS N.D. 0.005 Diisooctyl Phthalate (DIOP) %(w/w) EN14372: 2004, GC-MS N.D. 0.01 Dipropyl Phthalate (DPrP) %(w/w) EN14372: 2004, GC-MS N.D. 0.005 Dicyclohexyl Phthalate (DCHP) %(w/w) EN14372: 2004, GC-MS N.D. 0.005 Dipentyl Phthalate (DPP) %(w/w) EN14372: 2004, GC-MS N.D. 0.005 Dibenzyl Phthalate (DBzP) %(w/w) EN14372: 2004, GC-MS N.D. 0.005 Diphenyl Phthalate (DPhP) %(w/w) EN14372: 2004, GC-MS N.D. 0.005 Note :1. mg/kg = ppm, 0.1% = 1000ppm2. N.D. = Not detected (< MDL)3. MDL= Method Detection LimitFor reference:Entry 51/52 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No 1907/2006 (previously restricted under Directive 2005/84/EC):For DBP, BBP, DEHP(1)Shall not be used as substances or in mixtures, in concentrations greater than 0,1 % by weight of the plasticised material, in toys and childcare articles.(2) Toys and childcare articles containing these phthalates in a concentration greater than 0,1 % by weight of the plasticised material shall not be placed on the market.For DINP, DNOP, DIDP(1) Shall not be used as substances or in mixtures, in concentrations greater than 0,1 % by weight of the plasticised material, in toys and childcare articles which can be placed in the mouth by children.(2) Such toys and childcare articles containing these phthalates in a concentration greater than 0,1 % by weight of the plasticised material shall not be placed on the market.Test Report No.: GZ1001004486/CHEM Date: JAN 21, 2010 Page 4 of 14C: PFOS (Perfluorooctane sulfonates)Test Item(s) Unit Test Method (Reference) Result MDL Perfluorooctane sulfonates (PFOS)PFOS – Acidmg/kg EPA 3550C: 2007, LC-MS N.D. 10 PFOS – Metal SaltPFOS – AmideNote:1. mg/kg = ppm2. N.D. = Not Detected (< MDL)3. MDL = Method Detection LimitFor reference: Entry 53 of Regulation (EC) No 552/2009 amending Annex XVII of REACH Regulation (EC) No1907/2006 (previously restricted under Directive 2006/122/EC):(1) May not be placed on the market or used as a substance or constituent of preparations in a concentration equal to or higher than 0,005 % by mass.(2) May not be placed on the market in semi-finished products or articles, or parts thereof, if the concentration of PFOS is equal to or higher than 0,1 % by mass calculated with reference to the mass of structurally or microstructurally distinct parts that contain PFOS or, for textiles or other coated materials, if the amount of PFOS is equal to or higher than 1µg /m2 of the coated material.D: HalogenTest Item(s) Unit Test Method (Reference) Result MDLFluorine (F) mg/kg BS EN 14582:2007, IC N.D. 50Chlorine (Cl) mg/kg BS EN 14582:2007, IC N.D. 50Bromine (Br) mg/kg BS EN 14582:2007, IC N.D. 50Iodine (l) mg/kg BS EN 14582:2007, IC N.D. 50Note:1. mg/kg = ppm2. N.D. = Not Detected (< MDL)3. MDL = Method Detection LimitE: TBBPA (Tetrabromobisphenol A)Test Item(s) Unit Test Method (Reference) Result MDL Tetrabromobisphenol A (TBBPA) mg/kg EPA 3550C: 2007, GC-MS N.D. 10 Note:1. mg/kg = ppm2. N.D. = Not Detected (< MDL)3. MDL = Method Detection LimitTest Report No.: GZ1001004486/CHEM Date: JAN 21, 2010 Page 5 of 14F: HBCDDTest Item(s) Unit Test Method (Reference) Result MDL Hexabromocyclododecane (HBCDD) mg/kg EPA 3550C: 2007, GC-MS N.D. 10 Note:1. mg/kg = ppm2. N.D. = Not Detected (< MDL)3. MDL = Method Detection LimitG: FormaldehydeTest Item(s) Unit Test Method (Reference) Result MDL Formaldehyde Content mg/kg ISO 17226-1: 2008, HPLC N.D. 10 Note:1. mg/kg = ppm2. N.D. = Not Detected (< MDL)3. MDL = Method Detection LimitTest ReportNo.: GZ1001004486/CHEMDate: JAN 21, 2010Page 6 of 14ATTACHMENTS ATTACHMENTSTesting Flow ChartTesting Flow Chart 1) Name of the person who made measurement: Bella Wang 2) Name of the person in charge of measurement: Adams Yu3) These samples were dissolved totally by pre-conditioning method according to below flow chart (Cr 6+ test method excluded) .Test ReportNo.: GZ1001004486/CHEMDate: JAN 21, 2010Page 7 of 14Testing Flow ChartTesting Flow Chart1) Name of the person who made measurement: Tina Zhao2) Name of the person in charge of measurement: Ryan YangTest ReportNo.: GZ1001004486/CHEMDate: JAN 21, 2010Page 8 of 14ATTACHMENTS ATTACHMENTSTesting Flow Chart1) Name of the person who made measurement: Tina Zhao 2) Name of the person in charge of measurement: Ryan YangTest ReportNo.: GZ1001004486/CHEMDate: JAN 21, 2010Page 9 of 14ATTACHMENTS ATTACHMENTSTesting Flow Chart1) Name of the person who made measurement: Cindy Huang 2) Name of the person in charge of measurement: Ryan YangTest ReportNo.: GZ1001004486/CHEMDate: JAN 21, 2010Page 10 of 14ATTACHMENTS ATTACHMENTSTesting Flow Chart1) Name of the person who made measurement: Sawen Chen 2) Name of the person in charge of measurement: Michael TsoTest ReportNo.: GZ1001004486/CHEM Date: JAN 21, 2010 Page 11 of 14ATTACHMENTS ATTACHMENTSTesting Flow Chart Testing Flow Chart1) Name of the person who made measurement: Cutey Yu 2) Name of the person in charge of measurement: Ryan YangTest ReportNo.: GZ1001004486/CHEM Date: JAN 21, 2010 Page 12 of 14Testing Flow Chart Testing Flow Chart 1) Name of the person who made measurement: Cutey Yu 2) Name of the person in charge of measurement: Ryan YangTest ReportNo.: GZ1001004486/CHEM Date: JAN 21, 2010 Page 13 of 14ATTACHMENTS ATTACHMENTSTesting Flow Chart Testing Flow Chart1) Name of the person who made measurement: Michael Tso 2) Name of the person in charge of measurement: Michelle SongTest Report No.: GZ1001004486/CHEM Date: JAN 21, 2010 Page 14 of 14Sample photo :SGS authenticate the photo on original report only*** End of Report ***GZ1001004486/CHEM。

如何解读RoHS检测报告

如何解读RoHS检测报告

如何解读RoHS检测报告Intertek Testing Services Shanghai Ltd.上海天祥质量技术服务有限公司Smile Liu刘思明目录•RoHS指令简介•关于均质材料的指导性解释及拆样方法•RoHS检测的不同参考方法•RoHS测试报告的解读•R estriction o f the Use of Certain H azardousS ubstances in Electrical and Electronic Equipment (RoHS) Directive 2002/95/EC.•2003年2月公布于官方杂志•减少由电子电气设备中的有害物质引起的对环境和健康构成的风险•作为对WEEE指令的补充并与之平行执行•2004年8月13日转换成各成员国的国家法令.•正式生效:2006年7月1日.•仅对于2006年7月1日起投放市场的新产品。

•8类WEEE产品范围(不包括WEEE中8和9,医疗设备和监控设备)•包括家用的白炙灯泡和光源。

•不包括:–医用器材或监控设备(WEEE指令第8,9类)–在2006年7月1日前投放市场的维修备件。

–2006年7月1日前原先投放市场的再利用产品RoHS和WEEE范围–分类1.大型家用器具,如冰箱、洗衣机、微波炉;2.小型家用器具,如吸尘器、熨斗、钟表;3.信息技术和远程通讯设备,如电脑、复印机、打印机;4.用户设备,如电视机;5.照明设备,如荧光灯;WEEE : 不包含RoHS:包括家用的白炙灯泡和光源6.电气和电子工具,如电锯、缝纫机;7.玩具、休闲和运动设备;8.医疗设备(不适用于RoHS)9.监控设备(不适用于RoHS)10.自动售货机RoHS 指令要求–概要2006年7月1日后,新投放市场的电子电气设备不得含有如下受管制的有害物质:•重金属:–Lead 铅(Pb), Cadmium 镉(Cd), Mercury 汞(Hg), Chromium (VI) (Cr 6+).六价铬•某些含溴的阻燃剂–Polybrominated biphenyls (PBB’s);多溴联苯C 12H 10-X Br X (X= 1 to 10)–Polybrominated diphenyl ethers (PBDE’s).多溴二苯醚C 12H 10-X Br X O (X= 1 to 10)RoHS指令要求–概要•EU Technical Adaptation Committee (TAC)欧盟技术采用委员会已经制定基于“均质物质(单一物质)”重量的各有害物质允许的最大浓度(2005/618/EC):•镉0.01 % (100 ppm)•铅,汞,六价铬,多溴联苯(PBBs)和多溴联苯醚(PBDEs)0.1 % (1000 ppm)TAC提议的定义TAC已经提议的关键定义:均质物质(单一物质):不能被机械地分成不同物质的一种物质.均质的(均相的):完全一致的组成成分.如单一的塑胶、金属、玻璃等等机械性分拆:原则上物质可用机械的方法分离拆解例如旋开、切断、压碎、磨碎和研磨等过程实例1 :Printed Circuit Board 印刷电路板1.Coatings(green,white,lacquer) onepoxy resin board环氧树脂板上的表面涂层(绿色,白色和光油) 2.Copper metal in epoxy resin board环氧树脂板上的印刷电路铜片3.Epoxy resin board excluding coatingsand coppermetal不包括涂层及铜片在内的环氧树脂板实例2 : Electrolytic Capacitor电解电容1.silver colour metal (terminal pin)银色金属(接脚)2.plastic with coatings (external sleeve)塑料连同表面涂层(外套管)3.silver colour metal (internal sleeve)银色金属(内套管)4.black rubber (pad of sleeve)黑色橡胶(套管垫)5.internal electrolytic paper withelectrolytic oil内电解纸连同电解油6.internal electrolytic aluminium内电解铝箔电子元件的拆解案例实例3 :Cable Wire Covering 外电源线-Black plastic wire covering with whiteprinting连同白色印刷的黑色塑料外线Internal Metal Cable Line 金属电源内线-Copper metal with transparent coatedpolymer连同透明高聚物被服层的铜金属请列举3种不需要RoHS检测的带电产品•香烟报警器•电子秤•测试仪器•医疗器械RoHS检测的不同参考方法RoHS检测的不同参考方法重金属分析(铅, 镉, 汞)仪器•Inductively coupled argon plasma optical emission spectrometry (ICP-AES)等离子耦合原子发射光谱仪•Inductively coupled argon plasma mass spectrometry (ICP-MS)等离子耦合原子发射光谱质谱仪•Flame atomic absorption spectrometry (FAAS)火焰原子吸收光谱仪•Graphite furnace atomic absorption spectrometry (GFAAS)石墨炉原子吸收光谱仪适用的方法•测试材料需要被完全消解(溶解)成液体形态.•测试材料中的重金属可被定量测试. (达百万分之一(ppm)级或更低)NHCONHNH NHDiphenylcarbazideCr 6++二苯卡巴肼选择性地与六价铬反应生成紫红色复合物,但是不与三价铬反应。

rohs检测报告

rohs检测报告

rohs检测报告为了确保产品对环境和人类健康的安全,许多国家和地区都引入了不同的环保标准和法规。

其中,RoHS(限制使用某些有害物质指令)是一个重要的检测标准,旨在限制电子和电气设备中使用的一些有害物质。

本文将探讨RoHS检测报告的重要性以及它在保护环境方面的作用。

首先,RoHS检测报告是一份非常重要的文件。

它记录了产品中所含有害物质的含量,如铅、镉、汞、六价铬等。

这些物质在产品的制造和使用过程中可能对环境和人类健康产生负面影响。

通过对产品进行RoHS检测并获得合格的检测报告,消费者可以放心购买并使用这些产品,而不必担心其中的有害物质会对自己或环境造成伤害。

其次,RoHS检测报告对保护环境具有重要意义。

有害物质的使用和排放是环境污染的主要原因之一。

通过引入RoHS检测标准,可以有效降低产品制造和使用过程中有害物质的释放量。

产品制造商必须在生产过程中严格控制有害物质的使用,以符合相应的检测标准。

这不仅可以降低污染物排放,减少土壤、空气和水资源的污染,也有助于保护生态系统的平衡和人类健康。

此外,RoHS检测报告也对产品质量和可持续发展具有积极作用。

产品中的有害物质不仅对环境有害,而且可能对产品的功能和质量产生负面影响。

通过对产品进行RoHS检测并获得合格报告,制造商可以确保其产品符合环保标准,同时提供高质量的产品给消费者。

这有助于提升企业的声誉和竞争力,推动可持续发展。

然而,RoHS检测并非一项简单的任务。

由于现代电子产品的复杂性和多样性,确保每个部件都符合RoHS标准是一项挑战。

生产商需要与供应商密切合作,确保所使用的材料和零部件符合相应的标准。

此外,RoHS检测的准确性和可靠性也是一个关键问题。

为了避免不符合RoHS标准的产品进入市场,监管机构和第三方检测机构需要严格执行检测程序,保证结果的准确性和可信度。

综上所述,RoHS检测报告在产品质量保证、环境保护和可持续发展方面都具有重要作用。

通过RoHS检测,消费者可以放心使用符合环保标准的产品,同时保护环境和人类健康。

RoHS塑料产品检查认证报告RoHS_CH_AG12A0_AG15A3_AG15E1_AG15E3

RoHS塑料产品检查认证报告RoHS_CH_AG12A0_AG15A3_AG15E1_AG15E3

Signature Not VerifiedFor Question, Please Contact with SGS 測試報告台灣化學纖維股份有限公司 台北市敦化北路201號號碼 : CE/2012/C0747C日期 : 2012/12/13頁數 : 1 of 7 *CE/2012/C0747C*以下測試樣品係由客戶送樣, 且由客戶聲稱並經客戶確認如下: 樣品名稱 樣品型號 收件日期 測試期間 : : : : 丙烯腈/丁二烯/苯乙烯共聚合樹脂 TAIRILAC AG12A0, AG15A3, AG15E1, AG15E3 2012/12/06 2012/12/06 TO 2012/12/12===================================================================================================================測試需求:依據客戶要求, 參考RoHS 2011/65/EU Annex II 指令進行鎘, 鉛, 汞, 六價鉻, 多溴 聯苯, 多溴聯苯醚測試. 請見下一頁. 請見下一頁. 根據客戶所提供的樣品, 其鎘, 鉛, 汞, 六價鉻, 多溴聯苯, 多溴聯苯醚的測試結果 符合RoHS指令2002/95/EC的更新指令2011/65/EU之要求.測試方法 測試結果 結 論: : :Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / t + 886 (02)2299 3279 f + 886 (02)2299 3237 www.sgs.tw 33Member of the SGS Grouplly signed by wmholetech.2012.12.13 :32 CST測試報告台灣化學纖維股份有限公司 台北市敦化北路201號號碼 : CE/2012/C0747C日期 : 2012/12/13頁數 : 2 of 7 *CE/2012/C0747C*測試結果 測試部位 測試部位 測試部位 測試部位 No.1 No.2 No.3 No.4 測試項目 鎘 鉛 汞 六價鉻 多溴聯苯總和 一溴聯苯 二溴聯苯 三溴聯苯 四溴聯苯 五溴聯苯 六溴聯苯 七溴聯苯 八溴聯苯 九溴聯苯 十溴聯苯 多溴聯苯醚總和 一溴聯苯醚 二溴聯苯醚 三溴聯苯醚 四溴聯苯醚 五溴聯苯醚 六溴聯苯醚 七溴聯苯醚 八溴聯苯醚 九溴聯苯醚 十溴聯苯醚 : : : : 單位 mg/kg mg/kg mg/kg mg/kg 米色塑膠粒 米色塑膠粒 米色塑膠粒 米色塑膠粒 (AG12A0) (AG15A3) (AG15E1) (AG15E3) 測試方法 參考IEC 62321: 2008方法, 以 感應耦合電漿原子發射光譜儀 (ICP-AES)檢測. 參考IEC 62321: 2008方法, 以 UV-VIS檢測. 方法偵測 極限值 2 2 2 2 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 結果 No.2 No.3 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. 法規 限值 100 1000 1000 1000 1000 1000 -No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.No.4 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg 參考IEC 62321: 2008方法, 以 mg/kg 氣相層析/質譜儀(GC/MS)檢測. mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kgUnless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / t + 886 (02)2299 3279 f + 886 (02)2299 3237 www.sgs.tw 33Member of the SGS Group測試報告台灣化學纖維股份有限公司 台北市敦化北路201號號碼 : CE/2012/C0747C日期 : 2012/12/13頁數 : 3 of 7 *CE/2012/C0747C*備註: 1. 2. 3. 4. 5.mg/kg = ppm;0.1wt% = 1000ppm n.d. = Not Detected / 未檢出 MDL = Method Detection Limit / 方法偵測極限值 "-" = Not Regulated / 無規格值 此份報告取代CE/2012/C0747A報告.Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.33, Wu Chuan Rd., New Taipei Industrial Park, New Taipei City, Taiwan / t + 886 (02)2299 3279 f + 886 (02)2299 3237 www.sgs.tw 33Member of the SGS Group測試報告台灣化學纖維股份有限公司 台北市敦化北路201號號碼 : CE/2012/C0747C日期 : 2012/12/13頁數 : 4 of 7 *CE/2012/C0747C*1) 根據以下的流程圖之條件,樣品已完全溶解。

PET膜检验报告

PET膜检验报告
非晶硅部PET(聚脂薄膜)质量检测报告
厂商和批次 检验项目 标准值 送样日期 2009年 实验备注 月 日 抽检 初验□ 不良描述 再验□ 判定 合格
外观
1、感官鉴别:本品为 白色透明,手感较硬, 揉搓时有声响。外观似 PP。燃烧鉴别:燃烧时 有黑烟,火焰有跳火现 一个镜头内明显 象,燃烧后材料表面黑 气泡不能多于3个 色炭化,手指揉搓燃烧 后的黑色炭化物,碳化 物呈粉末状。 2、贴膜后有无表面气 泡和杂质残留; 3、单卷膜内不能有多 个接头。
规格 酒精及A、B胶试验
300mmX660X50uM 规格尺寸要符合要求 (底纸除外) 见检验标准 要能通过 1、有无落胶,开孔温 度是否合适;
开孔
2、撕膜时膜不能从中 开孔T=260-320℃ 间断裂(韧性好) 3、孔的四周不能变色 、掀起膜后电池背极不 能有变色现象 每25mm宽成180度角剥 离力要大于5N 30W电烙铁温度难以在 260℃ 薄膜上熔孔 130℃烘烤1小时无起皮 、破损和脱落、落胶。 零下70℃至150℃ 冰箱-20℃放2小时电池 性能不能下降 万用表测试,绝缘性 310KV/mm 好,易生静电 常温下浸水6小时电池 性能是否下降及膜面要 0.40% 不变色。 食用醋酸和小苏打溶液 耐弱酸、弱碱 中浸泡5小时性能无变 本身不显酸性(中性) 30℃下电池涂上胶水, 扩散不影响性能 6小时后测量性能无变 延展性良好,应力释放 1.5%(30分钟、 快,烤箱150℃下2小时 150℃ 无气泡生成和薄膜脱落 120%至200% 未测 1.38g/cm3 未测 5N以上
附着力 熔化点 工作温度
击穿电压强度
防水性 酸碱度
胶水扩散 应力释放 延伸 密度
20MΩ电表测量时超量程 草坪上测试要求日晒雨 户外老化 阳光老化 淋不变色、不能对电池 造成任何影响 ROHS标准 Hg、Cd、Pb、Cr不超标 X荧光仪器测试报告 说明:判定结果合格的在合格栏内打 “√” ;判定结果不合格的在不合格栏内打“√” 备注:

rohs测试报告

rohs测试报告

rohs测试报告近年来,随着环保意识的不断提升,ROHS测试报告成为了企业必备的一份重要文件。

ROHS(Restriction of Hazardous Substances)指令是欧洲议会和理事会制定的,旨在限制和防止电子电气设备中有害物质对人体健康和环境造成的危害。

ROHS指令禁止使用六种有害物质:铅(Pb)、汞(Hg)、镉(Cd)、六价铬(Cr6+)、多溴联苯(PBBs)和多溴二苯醚(PBDEs)。

这些物质被广泛应用于电子电气设备中,如计算机、手机、家电等。

然而,经过科学研究和实践证明,这些物质对人体健康和环境都存在潜在的危险。

ROHS测试报告的核心内容是对产品中这些有害物质的检测结果。

首先,专业的实验室会采集样本,包括产品中的关键部件和材料。

然后,通过一系列的分析方法,如X射线荧光光谱分析、火焰原子吸收光谱分析等,对样本中的有害物质进行定量检测。

最后,将检测结果用报告的形式呈现给客户。

ROHS测试报告的重要性不言而喻。

首先,它是企业进入国际市场的必要条件。

许多国家和地区都对进口产品的ROHS合规性提出了严格要求。

持有ROHS测试报告,可以证明企业的产品符合相关标准,有助于消除贸易壁垒,提高产品的国际竞争力。

其次,ROHS测试报告也是企业实施环保策略的重要手段。

在我们的生活中,电子电气设备无处不在。

然而,对于过去被广泛使用的有害物质,我们不得不承认其带来的环境和健康问题。

ROHS指令的出台,促使企业转变生产和经营方式,采用更环保的材料和工艺。

ROHS测试报告成为了企业自我监督和维护形象的方式之一。

同时,ROHS测试报告也为消费者提供了重要的参考信息。

在购买电子电气设备时,如何判断产品是否真正符合环保要求,是否存在潜在的危害物质?ROHS测试报告可以为消费者提供权威的数据依据,让消费者更加放心和明智地选购产品。

然而,ROHS测试报告也存在一些挑战和争议。

首先,测试过程可能存在一定的复杂性和成本。

rohs检测报告

rohs检测报告

rohs检测报告目录1. 检测报告的重要性1.1 保障产品质量1.1.1 符合法律法规要求1.1.2 保护消费者权益1.2 开拓市场1.2.1 提升品牌形象1.2.2 满足客户需求2. ROHS检测方法2.1 环保标准2.1.1 检测范围2.1.2 检测过程2.2 检测仪器2.2.1 XRF仪器2.2.2 FTIR仪器3. 报告结果解读3.1 合格与不合格3.1.1 各项指标标准3.1.2 需改进的地方3.2 未来改进方向3.2.1 替代材料选择3.2.2 生产工艺改进检测报告的重要性保障产品质量符合法律法规要求ROHS检测报告对产品进行严格检测,确保产品在材料使用上符合国家相关法律法规的要求,避免因使用禁用物质而引发风险。

保护消费者权益ROHS检测报告可以保证产品的材料安全性,消费者在购买时可以放心使用,避免对健康造成潜在威胁。

开拓市场提升品牌形象ROHS检测合格的产品可以证明企业对环保和消费者健康的重视,提升品牌形象,吸引更多消费者购买。

满足客户需求ROHS检测报告可以向客户证明产品的安全性和环保性,满足客户对产品质量的要求,提升客户满意度,促进销售。

ROHS检测方法环保标准检测范围ROHS检测主要针对电子电气产品,检测包括铅、汞、镉、六价铬等有害物质的含量,确保产品材料符合环保标准。

检测过程ROHS检测过程包括取样、样品制备、检测仪器分析等步骤,通过专业仪器对样品进行分析,得出检测结果。

检测仪器XRF仪器XRF仪器可以快速准确地检测出样品中的有害物质元素含量,是ROHS检测过程中常用的仪器之一。

FTIR仪器FTIR仪器可以通过样品的红外光谱特征来检测出样品中的物质成分,用于辅助ROHS检测结果的分析。

报告结果解读合格与不合格各项指标标准ROHS检测报告中包括各项有害物质的含量标准,产品在各项指标上符合标准即为合格,否则为不合格。

需改进的地方ROHS检测报告会指出产品中存在的不合格项,企业需要根据报告中的数据和建议进行改进,以达到合格标准。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

Signature Not VerifiedFor Question, Please Contact with SGS 測試報告 Test Report高冠企業股份有限公司 KK ENTERPRISE CO., LTD.號碼(No.) : CE/2010/83662A日期(Date) : 2010/08/30頁數(Page) : 1 of 16*CE/2010/83662A*南投市南崗工業區自強三路1號 NANKANG INDUSTRIAL PARK NO. 1 TSUCHIANG 3RD. RD. NAN-TOU CITY 以下測試樣品係由客戶送樣, 且由客戶聲稱並經客戶確認如下 (The following samples was/were submitted and identified by/on behalf of the client as): 樣品名稱(Sample Description) 樣品型號(Style/Item No.)收件日期(Sample Receiving Date): PET合成膜 (SYNTHETIC WHITE POLYESTER FILM) : TYP50.TYP25.TYP75、TYPJ50、TYPJ75 : 2010/08/19 : 2010/08/19 TO 2010/08/25 AND 2010/08/26 TO 2010/08/30測試期間(Testing Period)==================================================================================================================== 測試結果(Test Results) : 結論(Conclusion) : 請見下一頁 (Please refer to next pages). 1. 根據客戶所提供的樣品, 其多苯環芳香族化合物的測試結果符合德國ZLS的ZEK 01.2-08及 其相關修訂文件中的第1類PAHs要求 (Base upon the performed tests by submitted samples, the test results of PAHs comply with the PAHs requirement according to (Category 1) of ZEK 01.2-08 of German ZLS and its amendments.) 2. 根據客戶所提供的樣品, 其鎘、鉛、汞、六價鉻、多溴聯苯及多溴聯苯醚的測試結果符合 RoHS(2002/95/EC)及其修定指令之要求 (Based upon the performed tests by submitted samples, the test results of Cadmium, Lead, Mercury, Hexavalent Chromium Cr(VI), PBBs and PBDEs comply with the limits of RoHS Directive 2002/95/EC and its subsequent amendments).此份報告為加測及合併 CE/2010/83662 之報告 * (This report is added testing and combined with CE/2010/83662)Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /33t + 886 (02)2299 3279 f + 886 (02)2299 3237 Member of the SGS Group (SGS SA)y signed by wmholetech.c2010.08.30 11 08:00測試報告 Test Report高冠企業股份有限公司 KK ENTERPRISE CO., LTD.號碼(No.) : CE/2010/83662A日期(Date) : 2010/08/30頁數(Page) : 2 of 16*CE/2010/83662A*南投市南崗工業區自強三路1號 NANKANG INDUSTRIAL PARK NO. 1 TSUCHIANG 3RD. RD. NAN-TOU CITY 測試結果(Test Results) 測試部位(PART NAME)No.1 : 白色塑膠膜 (WHITE PLASTIC FILM) 方法偵測 極限值 (MDL) 2 結果 (Result) No.1 n.d.法規 限值 (Limit)測試項目 (Test Items) 鎘 / Cadmium (Cd)單位 (Unit)測試方法 (Method)鉛 / Lead (Pb)汞 / Mercury (Hg)六價鉻 / Hexavalent Chromium Cr(VI) by alkaline extraction 聚氯乙烯 / PVC 六溴環十二烷 / Hexabromocyclododecane (HBCDD) (CAS No.: 025637-99-4) 全氟辛烷磺酸 / Perfluorooctane sulfonates (PFOS) PFOS – Acid PFOS – Metal Salt PFOS – Amidemg/kg 參考IEC 62321: 2008方法, 以感應耦合電 漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. mg/kg 參考IEC 62321: 2008方法, 以感應耦合電 漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. mg/kg 參考IEC 62321: 2008方法, 以感應耦合電 漿原子發射光譜儀檢測. / With reference to IEC 62321: 2008 and performed by ICP-AES. mg/kg 參考IEC 62321: 2008方法, 以UV-VIS檢測. / With reference to IEC 62321: 2008 and performed by UV-VIS. ** 以紅外光譜分析及焰色法檢測. / Analysis was performed by FTIR and FLAME Test. mg/kg 參考US EPA 3540C方法, 以氣相層析/質譜 儀檢測. / With reference to US EPA 3540C method. Analysis was performed by GC/MS. mg/kg 參考US EPA 3540C: 1996方法, 以液相層析 /質譜儀檢測全氟辛烷磺酸含量. / With reference to US EPA 3540C: 1996 method for PFOS Content. Analysis was performed by LC/MS.1002n.d.10002n.d.10002n.d.10005Negative n.d.-10n.d.-Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /33t + 886 (02)2299 3279 f + 886 (02)2299 3237 Member of the SGS Group (SGS SA)測試報告 Test Report高冠企業股份有限公司 KK ENTERPRISE CO., LTD.號碼(No.) : CE/2010/83662A日期(Date) : 2010/08/30頁數(Page) : 3 of 16*CE/2010/83662A*南投市南崗工業區自強三路1號 NANKANG INDUSTRIAL PARK NO. 1 TSUCHIANG 3RD. RD. NAN-TOU CITY 方法偵測 極限值 (MDL) mg/kg 參考US EPA 3540C: 1996方法, 以液相層析 10 /質譜儀檢測全氟辛酸(銨)含量. / With reference to US EPA 3540C: 1996 method for PFOA Content. Analysis was performed by LC/MS. mg/kg 參考DIN 53313方法, 以氣相層析儀/質譜儀 10 檢測. / With reference to DIN 53313 method. Analysis was performed by GC/MS. 測試方法 (Method) 0.003 結果 (Result) No.1 n.d.法規 限值 (Limit)測試項目 (Test Items) 全氟辛酸(銨) / PFOA (CAS No.: 000335-67-1)單位 (Unit)-四溴雙酚-A / Tetrabromobisphenol A (TBBP-A) (CAS No.: 000079-94-7)n.d.-可塑劑定量分析 / Phthalates 鄰苯二甲酸甲苯基丁酯 / BBP (Benzyl butyl phthalate) (CAS No.: 000085-68-7) 鄰苯二甲酸二 (2-乙基己基)酯 / DEHP (Di- (2-ethylhexyl) phthalate) (CAS No.: 000117-81-7) 鄰苯二甲酸二異癸酯 / DIDP (Diisodecyl phthalate) (CAS No.: 026761-40-0) 鄰苯二甲酸二異壬酯 / DINP (Diisononyl phthalate) (CAS No.: 028553-12-0) 鄰苯二甲酸二正辛酯 / DNOP (Di-noctyl phthalate) (CAS No.: 000117-84-0) 鄰苯二甲酸二丁酯 / DBP (Dibutyl phthalate) (CAS No.: 000084-74-2) 鄰苯二甲酸二甲酯 / DMP (Di-methyl phathalate) (CAS No.: 000131-113) 鄰苯二甲酸二己酯 / DNHP (Di-nhexyl phthalate) (CAS No.: 000084-75-3) n.d. -0.003n.d.-0.01n.d.-0.01 % 參考EN 14372, 以氣相層析儀/質譜儀檢測 之. / With reference to EN 14372. Analysis was performed by GC/MS.n.d.-0.003n.d.-0.003 0.003n.d. n.d.-0.003n.d.-Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /33t + 886 (02)2299 3279 f + 886 (02)2299 3237 Member of the SGS Group (SGS SA)測試報告 Test Report高冠企業股份有限公司 KK ENTERPRISE CO., LTD.號碼(No.) : CE/2010/83662A日期(Date) : 2010/08/30頁數(Page) : 4 of 16*CE/2010/83662A*南投市南崗工業區自強三路1號 NANKANG INDUSTRIAL PARK NO. 1 TSUCHIANG 3RD. RD. NAN-TOU CITY 方法偵測 極限值 (MDL) 5 5 5 5 5 5 5 5 5 參考IEC 62321: 2008方法, 以氣相層析儀/ 5 mg/kg 質譜儀檢測. / With reference to IEC 62321: 2008 and performed by GC/MS. 5 5 5 5 5 5 5 5 5 5 測試方法 (Method) 50 參考BS EN 14582:2007, 以離子層析儀分 析. / With reference to BS EN mg/kg 14582:2007. Analysis was performed by IC. 50 50 50 結果 (Result) No.1 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.測試項目 (Test Items)多溴聯苯總和 / Sum of PBBs 一溴聯苯 / Monobromobiphenyl 二溴聯苯 / Dibromobiphenyl 三溴聯苯 / Tribromobiphenyl 四溴聯苯 / Tetrabromobiphenyl 五溴聯苯 / Pentabromobiphenyl 六溴聯苯 / Hexabromobiphenyl 七溴聯苯 / Heptabromobiphenyl 八溴聯苯 / Octabromobiphenyl 九溴聯苯 / Nonabromobiphenyl 十溴聯苯 / Decabromobiphenyl 多溴聯苯醚總和 / Sum of PBDEs 一溴聯苯醚 / Monobromodiphenyl ether 二溴聯苯醚 / Dibromodiphenyl ether 三溴聯苯醚 / Tribromodiphenyl ether 四溴聯苯醚 / Tetrabromodiphenyl ether 五溴聯苯醚 / Pentabromodiphenyl ether 六溴聯苯醚 / Hexabromodiphenyl ether 七溴聯苯醚 / Heptabromodiphenyl ether 八溴聯苯醚 / Octabromodiphenyl ether 九溴聯苯醚 / Nonabromodiphenyl ether 十溴聯苯醚 / Decabromodiphenyl ether單位 (Unit)法規 限值 (Limit)1000 1000 -鹵素 鹵素 (CAS 鹵素 (CAS 鹵素 (CAS 鹵素 (CAS/ Halogen (氟) / Halogen-Fluorine (F) No.: 014762-94-8) (氯) / Halogen-Chlorine (Cl) No.: 022537-15-1) (溴) / Halogen-Bromine (Br) No.: 010097-32-2) (碘) / Halogen-Iodine (I) No.: 014362-44-8)Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /33t + 886 (02)2299 3279 f + 886 (02)2299 3237 Member of the SGS Group (SGS SA)測試報告 Test Report高冠企業股份有限公司 KK ENTERPRISE CO., LTD.號碼(No.) : CE/2010/83662A日期(Date) : 2010/08/30頁數(Page) : 5 of 16*CE/2010/83662A*南投市南崗工業區自強三路1號 NANKANG INDUSTRIAL PARK NO. 1 TSUCHIANG 3RD. RD. NAN-TOU CITY 方法偵測 極限值 (MDL) 結果 (Result) No.1測試項目 (Test Items) 多苯環芳香族化合物 / Polynuclear Aromatic Hydrocarbons (PAHs) Acenaphthene (CAS No.: 000083-329) Acenaphthylene (CAS No.: 00020896-8) Anthracene (CAS No.: 000120-12-7) Benzo[a]anthracene (CAS No.: 000056-55-3) Benzo[a]pyrene (CAS No.: 00005032-8) Benzo[b]fluoranthene (CAS No.: 000205-99-2) Benzo[g,h,i]perylene (CAS No.: 000191-24-2) Benzo[k]fluoranthene (CAS No.: 000207-08-9) Chrysene (CAS No.: 000218-01-9) Dibenzo[a,h]anthracene (CAS No.: 000053-70-3) Fluoranthene (CAS No.: 000206-440) Fluorene (CAS No.: 000086-73-7) Indeno[1,2,3-c,d] pyrene (CAS No.: 000193-39-5) Naphthalene (CAS No.: 000091-203) Phenanthrene (CAS No.: 000085-018) Pyrene (CAS No.: 000129-00-0) 多苯環芳香族化合物16項總和 / Sum of 16 PAHs單位 (Unit)測試方法 (Method)法規 限值 (Limit)0.2 0.2 0.2 0.2 0.2 0.2 0.2 參考ZLS standard ZEK 01.2-08方法, 以氣 相層析/質譜儀檢測. / With reference to mg/kg ZLS standard ZEK 01.2-08 method. Analysis was performed by GC/MS. 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 -n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d.-Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /33t + 886 (02)2299 3279 f + 886 (02)2299 3237 Member of the SGS Group (SGS SA)測試報告 Test Report高冠企業股份有限公司 KK ENTERPRISE CO., LTD.號碼(No.) : CE/2010/83662A日期(Date) : 2010/08/30頁數(Page) : 6 of 16*CE/2010/83662A*南投市南崗工業區自強三路1號 NANKANG INDUSTRIAL PARK NO. 1 TSUCHIANG 3RD. RD. NAN-TOU CITY備註(Note): 1. mg/kg = ppm;0.1wt% = 1000ppm 2. n.d. = Not Detected (未檢出) 3. MDL = Method Detection Limit (方法偵測極限值) 4. "-" = Not Regulated (無規格值) 5. **= Qualitative analysis (No Unit) 定性分析(無單位) 6. Negative = Undetectable 陰性(未偵測到); Positive = Detectable 陽性(已偵測到) PFOS參考資訊(Reference Information) : 指令 2006/122/EC (Directive 2006/122/EC) (1) 該物質不可置於市場上或使用於特殊物質或配置成分重量濃度等於或大於0.005%. (May not be placed on the market or used as a substance or constituent of preparations in a concentration equal to or higher than 0.005% by mass.) (2) 該物質不可置於市場上的半成品或商品或其物件; 假若零件上明顯地具有PFOS並參照結構上及微細構造上計 算PFOS重量濃度等於或大於0.1%, 而紡織品或其他覆蓋物質, 如果PFOS在覆蓋物質中含量等於或大於1µ g/m². (May not be placed on the market in semi-finished products or articles, or parts thereof, if the concentration of PFOS is equal to or higher than 0.1% by mass calculated with reference to the mass of structurally or microstructurally distinct parts that contain PFOS or, for textiles or other coated materials, if the amount of PFOS is equal to or higher than 1µ g/m² of the coated material.)Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS Taiwan Ltd.Chemical-Taipei 33 WuChyuan Road, Wuku Industrial Zone, Taipei County, Taiwan /33t + 886 (02)2299 3279 f + 886 (02)2299 3237 Member of the SGS Group (SGS SA)測試報告 Test Report高冠企業股份有限公司 KK ENTERPRISE CO., LTD.號碼(No.) : CE/2010/83662A日期(Date) : 2010/08/30頁數(Page) : 7 of 16*CE/2010/83662A*南投市南崗工業區自強三路1號 NANKANG INDUSTRIAL PARK NO. 1 TSUCHIANG 3RD. RD. NAN-TOU CITY PAHs參考資料(Reference information) : 依據ZEK 01.2-08之要求: 產品中最大值為 (Requirement of ZEK 01.2-08 : Restraining maximum values for products)項目 (Parameter) 第1 類 (Category 1) 與食品接觸或放入嘴內的 材料, 以及給三歲以下的 幼兒使用的玩具 . (Materials in contact with foodstuff or materials which are meant to put in the mouth as well as toys for children <36 months.) 苯駢(a)芘 Benzo[a]pyrene (mg/kg) 環保署規範16項PAH 總濃度 (Sum of 16 EPA-PAH) (mg/kg)* <MDL (<0.2)** 10 200 <MDL (<0.2)** 第 2類 (Category 2) 持續地(長時間 )與皮膚接 觸逾 30秒 , 以及不屬第 1 類的玩具. (Materials with foreseeable skin contact >30 s (prolonged skin contact) and toys not covered by category 1.) 第 3類 (Category 3) 暫時地( 短時間)與皮膚接 觸但不逾30秒或不會與 皮膚接觸. (Materials with foreseeable skin contact <30 s (short time skin contact) or without skin contact.)120注意(Remark): * = PAH濃度大於0.2mg/kg時,則須計算PAH總濃度值. (Only PAH substances >0.2 mg/kg are taken into account while calculating the sum of PAHs.) ** = 最大濃度值超出等級一的限制,但在等級二的濃度限制值內時,可能需要確認測試材質是否合適於食品容器或是依照 DIN EN1186ff/ §64 LFGB 80.30-1方法,針對特定PAH的遷移測試進行測試。

相关文档
最新文档