达因笔的测试方法及测试重点(答案)
达因液达因笔测试
表面张力测试液达因液美国进口1盎司/瓶美国ACCU TEST测试液能准确的测试出塑料薄膜之表面张力是否达到测试液的数值。
令使用者清楚的了解此薄膜是否适合于印刷，复合或真空镀铝。
有效的控制质量及减少因材质不合格所造成的损失。
它并不仅限于塑料薄膜，还可以测试各种材料的表面张力。
原装进口测试液有30-72数十个品种。
一般来说，基材形成墨滴，涂层和粘贴能力和表面的能量相关。
如果基材表面的能量低于所涂测试液的表面的张力，则形成珠点和画线收缩。
因而，对大多数的基于印刷，塑料的溶剂来说，测试笔的要求在36-40达因/厘米之间。
基于墨的些液体要求测试笔在40-44达因/厘米之间。
而一些碾压和涂层的应用要求表面能量在50达因/厘米或者以上。
显而易见，在进行印刷，涂层和碾压前需要对表面的能量先预估。
ACCU TEST测试液在绝大多数的非粘贴性的材料上表现良好。
重要的是测试液不会改变基材的表面特性。
例如，如果测试液渗入一个纤维基材（如纸）致使膨胀，结果可以说明其容易潮湿。
基材和测试液间的生化反应使结果无效。
为了确保测试结果的可重复性，材料的准备和测试的方法必须标准化。
ASTM STD D6182协议规定了测试条件以及方法。
For Medical & Emergency OnlyMATERIAL SAFETY DATA SHEET1.PRODUCT INFORMATIONPRODUCT NAME: ACCU TEST CHECK PENS 30-60NFPA Hazard Signal Health – 1; Stability – 0; Flammability – 0; Special – C2.PHYSICAL DATABOLING POING: 135 C to 210 C Freezing Point -90 C to +2 C(at 760 mm Hg) (at 760 mm Hg)SPECIFIC GRAVITY: 0.93 to 1.13 Vapor Pressure, 0.08 – 3.75at 20 C (H20 = 1.0) mm Hg, at 20 CVAPOR DENSITY: 3.1 Solubility in water, CompleteAt 20 C (air = 1) % by wt. At 20 CPercent Volatiles 100% Evaporation Rate 0.32 to 0.60(by volume) (Butyl Acetate = 1)APPEARANCE & ODOR: Blue solution with mild, non-residual odor3.HAZARD SPECIFICATIONSThese hazards are associated with the fluids contained in ACCU TEST CHECK PENS Reproductive Toxin Skin Hazard TLV=20 to 200ppmEye Hazard Kidney Toxin PEL=5ppm (8 hr weighted avg.)Sensitizer Toxic Agent EPA Hazardous Waste Class: n/aCombustible Liquid Skin Irritant DOT Hazard Class: n/a4.FIRE & EXPLOSION HAZARD DATAFlash Point: 108 F to 245 F, per ASTM D56; tag closed cup.Autoignition Temperature: n/aFlammability limits in air (by vol. At 200 F): 1.7% to 15.6%Extinguishing Media: Water fog recommended: CO2 dry chemical, and universal foam medi a, as applied by manufacturer’s recommendations, can also be used.Unusual Fire/Explosion Hazards: Can react with oxidizing materials.ACCU TEST CHECK PENS Page 25.HEALTH HAZARD DATA:Inhalation: Vapors are irritating to eyes, nose, and respiratory tract. May cause hea dache, nausea, vomiting, weakness.Skin Contact: May cause irritation. Wear protective gloves.Ingestion: See inhalation: can also cause breathing difficulty. Kidney damage may res ult from ingestion of large quantities of test solution.Skin absorption: Prolonged or widespread contact with skin may lead to absorption of harmful amounts of materials resulting in symptoms as described under ingestion. Eye Contact: Cause marked irritationSPECIAL WARING: pregnant women should not use this product; laboratory studies of ani mal subjects have shown birth defects, delayed fetal development, and increased fetal mortality at air concentrations of 150 to 200ppm.6.EMERGENCY AND FIRST AID PROCEDURES:Eyes: Flush liberally with running water. Call a physician.Skin: Immediately remove contaminated clothing. Thoroughly wash affected area with so ap and water.Inhalation: Remove to fresh air. If breathing if difficult, give oxygen and call a ph ysician.Ingestion: Give large quantities of water. Induce vomiting. Call a physician.7.REACTIVITY DATA:Decomposes partially at temperatures above 180 Celsius. Do not combine with concentra ted alkali at elevated temperatures.Hazardous combustion or decomposition products: CO, NHx.8.SPILL OR LEAK PROCEDURES:Absorb spill with paper toweling or vermiculite. Once absorbed, evaporate outdoors or incinerate in a chemical burner equipped with an after-burner and scrubber.Dispose of waste product by high temperature incineration, as approved under appropri ate federal, state and local legislation. Do not discharge without prior written appr oval from the appropriate health and environmental authorities.ACCU TEST CHECK PENS Page 39.SPECIAL PRECAUTIONS:NOT FOR USE AS A CONSUMER PRODUCT. FOR INDUSTRIAL USE ONLY.Keep this product away from heat and flame. Always use with adequate ventilation. Do not allow fluid to contact skin; wear gloves.WARNING TO PREGNANT WOMEN: Do not use ACCU TEST CHECK PENS unless exposure is extreme ly low. Even small amounts, if repeatedly inhaled, ingested, or absorbed through skin, may cause fetal malformations.10.HANDLING AND DISPOSAL GUIDE:ACCU TEST CHECK PENSFlexart Inks, Paints & Coatings, Inc. strongly recommends you wear protective gloves while using these test marker pens; skin contact presents the highest potential for e xposure under normal testing conditions. Eye protection and a laboratory coat or apro n are also good precautions.Ventilation must be adequate to ensure that vapors will not accumulate; and exhaust h ood is ideal, though not absolutely necessary as long as there is reasonable airflow in the test area.Spent material samples must be handled with care: Disposal of these contaminated mate rials also presents exposure hazards. We suggest you allocate one trash container exc lusively for dyne test waste; use an inner liner, keep it covered, and label the lid. “DO NOT HANDLE THIS WASTE WITHOUT PROTECTIVE GLOVES. AVOID SKIN CONTACT.”Outdated pens should be dispositioned by your in-house industrial waste expert via yo ur contracted waste handling firm. The EPA classifies the constituents of these pens as generic solvents, but your local regulations may be more stringent. ALWAYS REVIEW THE MSDS WITH YOUR WASTE- HANDLING FIRM TO ENSURE PROPER HADLING.While Flexart Inks, Paints & Coatings, Inc. believes the information contained herein is factual and the opinions expressed are those of qualified experts, this informati on is not to be taken as a warranty for which While Flexart Inks, Paints & Coatings, Inc. assumes legal responsibility. It is provided solely for consideration, investiga tion, and verification.FLEXART ACCU TEST CHECK PENS TESTING METHODSACCU-TEST CHECK PENS perform well on most non-absorptive materials.Do not touch or in any way contaminate the surface to be tested.Do not use contaminated or outdated ACCU-TEST CHECK PENS.Never retest the same location on a sample: move along the sample, or pull a new one. Store ACCU-TEST CHECK PENS at room temperature.Pull test sample. Make sure you pull a good sample specimen.For extruded film, one entire web cross-section should be okay. Do not touch the surf ace. Place the sample on a clean, level surface. Always go left to right in order to maintain the same consistency.Record ambient temperature and relative humidity. If sample temperature differs from ambient, allow it to stabilize.A minimum 3 sample points should be test: 1/4, 1/2 and 3/4 across the film section. I t is good practice to test the outer edges as well. For non-film materials, test loca tions must be determined in-house.Determination of wettingChoose a ACCU-TEST CHECK PEN, which you believe, is slightly lower than that of the s ubject material.1.1 Use a light touch to draw the pen across the test pen from left to right in two o r three parallel lines. Disregard the first pass.1.2 If the last swath remains wetted out on the test sample for three seconds or more, repeat the step 1.1 with the next higher dyne level pen. If the last ink swath beads up, tears apart, or shrinks into a thin line within on second or less, repeat step 1.1 with a lower level pen. If the ink swath holds for one to three seconds before losi ng its integrity, the dyne level of the pen closely matches that of the sample.This is relatively accurate surface energy measurement technique: used in standard 2 dynes/cm increments.To investigate discrepancies between obtained and expected results, a more precise me asurement method should be considered: application ACCU-TEST SOLUTION surface tension test fluids with cotton swabs (per ASTM D2578-84) or by use of a draw down rod is re commended. Alternatively, if results are suspect, replicate the test with a set of un used pens. This test method has proven itself on a wide variety of substrates: it is,however, more prone to contamination than some other techniques. We do offer Jumbo r efillable pens with replaceable wider nibs.* It always recommended that you two or mores pulled samples of the same specimen.*原文地址：达因液配置方法和测试方法作者：金伟_多层共挤VS达因液配置方法和测试方法1、使用方法：將達因筆垂直於薄膜平面，在薄膜表面上均勻畫一條直線，來判斷是否適合印刷加工要求。
达因值测试原理
达因值测试原理咱先得知道啥是达因值呀。
简单来说呢，达因值就是用来衡量一个表面的表面能的数值。
你可以把这个表面想象成一个小舞台，每个分子都在这个舞台上有自己的“戏份”呢。
达因值越高，就说明这个表面能越高，就像这个舞台对各种“演员”（其他物质）的吸引力越大。
那这个达因值是怎么测出来的呢？这就像是一场奇妙的小实验。
通常呀，会用到一种特殊的达因笔。
这个达因笔就像是一个小侦探，它里面装着一种特殊的液体。
当你拿着达因笔在要测试的表面上划一道的时候，就像是小侦探在这个表面上留下了自己的脚印。
如果这个表面的达因值比较高，那这个特殊液体就能很好地在表面铺展开来。
就像你把水倒在特别干净光滑的玻璃上，水会一下子就铺开了。
这时候呢，达因笔留下的痕迹就会很均匀，而且可能很快就消失不见啦，就像小侦探的脚印被这个热情的“舞台”一下子就给“抹去”了。
但是呢，如果这个表面的达因值比较低，就像这个“舞台”比较高冷，不太欢迎外来的东西。
那达因笔里的液体就不能很好地铺开，可能就会缩成一小团，达因笔的痕迹就会很明显，就像小侦探的脚印在这个不友好的“舞台”上孤零零地待着。
你知道吗？这个达因值的测试在很多地方都超级有用呢。
比如说在印刷行业。
如果纸张的达因值不合适，油墨就像是一群找不到家的小蚂蚁，不知道该怎么在纸张这个“大地图”上好好待着。
如果纸张达因值低，油墨就不容易附着，印出来的东西就会模糊不清，就像小蚂蚁到处乱跑，没有秩序。
在塑料行业也是一样的道理。
塑料表面要是达因值不对，那要在上面贴个标签或者进行一些表面处理的时候，就会麻烦重重。
就像两个人性格不合，怎么都凑不到一块儿去。
而且呀，不同的材料达因值的范围也有很大差别呢。
像一些金属表面，达因值可能就比较高，因为金属原子之间的结构比较紧密，对外界物质的吸引力就比较大。
而像一些塑料，特别是那些比较光滑、不容易被其他物质附着的塑料，达因值就可能比较低。
我再给你举个特别形象的例子哈。
你看啊，达因值高的表面就像是一个热情好客的主人，总是欢迎各种客人（其他物质）来家里做客，还会把家里打扫得干干净净（让其他物质很好地铺开）。
达因笔
达因笔达因笔,又名表面张力测试笔、电晕处理笔、及塑料薄膜表面张力检测笔。
是薄膜表面电晕度（达因）的测试工具，专门用于测定薄膜受电晕处理后的效果。
表面张力测试笔有32、34、36、38、40、42、44、46、48、50、52、54、56、58、60或以上十多种不同张力的试笔，能准确地测试出塑料薄膜表面张力是否达到试笔的数值。
令使用者清楚了解此薄膜是否适合于印刷、复合或真空镀铝等等，从而有效地控制质量，减少因材质不合格所造成的损失。
一.达因笔的适用范围:适用于凹版印刷、胶印印刷、UV印刷。
二.达因笔的规格:32、34、36、38、40、42、44、46、48、50、52、54、56、58、60。
三.达因笔的使用方法:使表面张力测试笔垂直于薄膜平面,加上适当的压力,在薄膜表面上画一条线.量程稍小的表面张力测试笔较易画上直线,因此不须太大压力；而40、42、44的表面张力测试笔需在画线时多加一点压力。
一般情况下，初次测试为保测量的准确度，需备6支不同型号的表面张力测试笔；若确定薄膜表面张力度数字变化极小，则至少需要3支不同型号的表面张力测试笔。
分析结果:1、已经适当电晕处理的薄膜若画线很平均地分布，不起任何珠点，则说明该薄膜表面达因，高于或等于表面张力测试笔上所标出的指数2、没有适当电晕处理的薄膜若画线慢慢地收缩，则说明该薄膜表面达因，低于表面张力测试笔上所标出的指数。
3、没有电晕处理的薄膜若画线立即收缩，并且形成珠点，则说明该薄膜表面达因，极低于表面张力测试笔所标出的指数。
四.达因笔的测试原理:应用表面张力测试笔，能够很容易的分析出不同固体的表面能、亲水性、润湿度等微小变化。
分析方法简单且有效，仅在基材表面上划一道痕就能迅速知道准确结果。
这是专为生产线的测试而设计的，由工厂经过培训的操作者进行。
测试时，应选择一个中间值来作起点，如38mN/m,测试时，如果在2秒内测试笔湿了基材表面，则基材表面张力比所选值要大或正好，那么须要选一更大值的测试笔进行第二次测试，如此类推，直到测试结果在2秒内改缩成水珠（球状），则这次测试之前一次的值就被视为基材的表面能。
达因笔测试塑胶产品表面判定标准
文章标题：探索达因笔测试塑胶产品表面判定标准的意义与方法一、引言在塑胶产品的生产和制造过程中，表面质量是一个非常关键的因素。
良好的表面质量不仅可以提升产品的外观质感，还能影响产品的使用寿命和性能。
而达因笔测试作为一种常用的表面检测方法，对塑胶产品的质量判定起着至关重要的作用。
本文将从深度和广度的角度出发，探讨达因笔测试塑胶产品表面判定标准的意义与方法，帮助读者更全面、深入地理解这一主题。
二、达因笔测试的定义及原理我们需要了解达因笔测试的基本定义和原理。
达因笔是一种专门用于测试塑料表面张力的工具，它的原理是利用油墨的表面张力来测试塑料表面的接收性能。
简单来说，达因笔测试就是用一种特殊的笔在塑料表面画线，通过观察油墨的表现来判断塑料表面的性能。
三、达因笔测试在塑胶产品制造中的意义接下来，让我们来探讨达因笔测试在塑胶产品制造中的意义。
塑胶产品的表面质量直接影响着产品的使用寿命和外观质感。
而达因笔测试可以帮助生产厂家判断塑料表面的接收性能，从而及时发现和解决产品表面质量的问题。
通过达因笔测试，生产厂家可以更准确地评估塑胶产品的表面质量，为产品质量的控制和改进提供重要参考依据。
四、达因笔测试的方法与流程在实际操作中，达因笔测试的方法与流程也需要我们十分重视。
我们需要准备好达因笔测试所需的仪器和试剂，比如达因笔、测试板等。
按照标准的测试方法和流程进行测试操作，尽量避免外界因素对测试结果的影响。
根据测试结果进行数据分析和评价，及时调整生产工艺或改进产品设计。
五、个人观点及总结就我个人而言，我认为达因笔测试在塑胶产品表面质量控制中具有非常重要的作用。
通过达因笔测试，我们可以及时发现产品表面的质量问题，并且有针对性地进行改进和控制，从而提升产品的整体质量和竞争力。
达因笔测试是一个简单而有效的测试方法，值得在塑胶产品制造中广泛应用。
六、结语通过本文的探讨，相信读者对达因笔测试在塑胶产品表面判定标准方面有了更深入的了解。
达因笔测试判定方法
达因笔测试判定方法
达因笔测试是一种用来评估人类智力和心理健康状况的测试方法。
它是由德国心理学家达因（Hans Georg Gram）发明的。
达因笔测试的基本原理是：在一张白纸上，测试者需要用黑色笔在规定的时间内绘制若干图形。
测试者无需按照任何固定的标准来绘制图形，可以自由发挥。
在测试过程中，测试者的思维活动和情绪状态都会在图形中得到体现。
达因笔测试判定方法是：
1.对测试者绘制的图形进行统计分析，确定测试者的基本特征
，如年龄、性别、文化水平、心理健康状况等。
2
继续达因笔测试判定方法：
1.对测试者绘制的图形进行解释，了解测试者的思维模式
、情绪状态、人际关系、自我感觉等。
这一步需要结合测试
者的基本信息和背景，对图形中的细节进行分析，并对图形
中出现的问题进行解决。
2.对测试者的结果进行比较，与正常人的结果进行比较，
了解测试者的心理健康状况。
根据测试者的结果，可以判断
其是否存在心理问题，如焦虑、抑郁、人格障碍等。
达因笔测试的判定方法是一种综合性的方法，需要对测试者的基本信息和背景进行分析，并对图形中的细节进行解释。
通过达因笔测试，可以了解测试者的心理健康状况，并为其提供心理咨询和治疗方案。
达因笔使用方法
达因笔一、性能介绍达因笔.能准确地测试出塑料薄膜之表面张力是否达到试笔的数值.令使用者清楚了解此薄膜是否适合于印刷.复合或真空镀铝.有效地控制质量及减少因材质不合格所造成的工具延误.二、测试方法在工业性实践中，塑料表面能量（表面张力）的测定是通过测试油墨按照DIN ISO 8296，是以已知不同表面能量的墨在拟测的薄膜上刷上约100mm长的墨条，并观察其90%以上的墨条边在2秒钟内是否发生收缩并形成墨滴，如有，则换低一级表面能的墨再刷墨条，进行同样的观察，直至不收缩和出现墨滴，此测试墨的表面能即相对应为该薄膜的表面能。
这种方法能准确测出基材的表面张力、表面湿力并判定工作前基材表面因素是否符合要求以便调整油墨、涂层、粘度到工作所需。
有30到72 mN/m二十一种表面能级的测试墨（每种相差2mN/m）。
达因试笔（38mN/m）可以用作电晕处理后表面能的一种快速测试工具，但不适合作为已印好或涂布好表面的系统测试。
当测试笔在电晕处理过的表面划出一条线，如果是连续成线的，说明该材料表面能不低于38mN/m，如断断续续不连成线，说明该材料表面能不到38mN/m，处理不足或甚至未处理，不符合印刷加工要求。
表面张力、表面湿力对于准确测定印刷油墨和其他材料在表面的粘结状况是非常明确的标准，但影响粘度的还有其他因素，如静电及诸多的添加剂。
然而这些因素在测试时却不常显示出，甚至是测试结果很好但实际却不合要求。
这就需要和原料供应商讨论这些技术问题。
一般而言，以上情况对他们来说是不会发生的，且表面值在38-41mN/m 即能达到粘度要求。
而表面张力在37mN/m以下时会造成许多白页（无印刷内容），在35mN/m以下时粘度就不好了。
材料表面处理所需的表面张力参考值刷出来的薄膜是否符合标准，但是有很多印刷厂商不知道如何去确定哪种达因笔好，或者如何去测试这个达因值,下面我来给大家提供一点本人的意见，有什么不当之处希望大家见谅，并愿意与大家交换意见！！达因笔（又叫表面张力测试笔，电晕笔，塑料薄膜测试笔，电晕值测试笔，达因测试笔等）可以准确测试薄膜表面达因值或表面润湿张力,为国外先进工艺技术生产。
达因液达因笔测试
表面张力测试液达因液美国进口1盎司/瓶美国ACCU TEST测试液能准确的测试出塑料薄膜之表面张力是否达到测试液的数值。
令使用者清楚的了解此薄膜是否适合于印刷，复合或真空镀铝。
有效的控制质量及减少因材质不合格所造成的损失。
它并不仅限于塑料薄膜，还可以测试各种材料的表面张力。
原装进口测试液有30-72数十个品种。
一般来说，基材形成墨滴，涂层和粘贴能力和表面的能量相关。
如果基材表面的能量低于所涂测试液的表面的张力，则形成珠点和画线收缩。
因而，对大多数的基于印刷，塑料的溶剂来说，测试笔的要求在36-40达因/厘米之间。
基于墨的些液体要求测试笔在40-44达因/厘米之间。
而一些碾压和涂层的应用要求表面能量在50达因/厘米或者以上。
显而易见，在进行印刷，涂层和碾压前需要对表面的能量先预估。
ACCU TEST测试液在绝大多数的非粘贴性的材料上表现良好。
重要的是测试液不会改变基材的表面特性。
例如，如果测试液渗入一个纤维基材（如纸）致使膨胀，结果可以说明其容易潮湿。
基材和测试液间的生化反应使结果无效。
为了确保测试结果的可重复性，材料的准备和测试的方法必须标准化。
ASTM STD D6182协议规定了测试条件以及方法。
For Medical & Emergency OnlyMATERIAL SAFETY DATA SHEET1.PRODUCT INFORMATIONPRODUCT NAME: ACCU TEST CHECK PENS 30-60NFPA Hazard Signal Health – 1; Stability – 0; Flammability – 0; Special – C2.PHYSICAL DATABOLING POING: 135 C to 210 C Freezing Point -90 C to +2 C(at 760 mm Hg) (at 760 mm Hg)SPECIFIC GRAVITY: 0.93 to 1.13 Vapor Pressure, 0.08 – 3.75at 20 C (H20 = 1.0) mm Hg, at 20 CVAPOR DENSITY: 3.1 Solubility in water, CompleteAt 20 C (air = 1) % by wt. At 20 CPercent Volatiles 100% Evaporation Rate 0.32 to 0.60(by volume) (Butyl Acetate = 1)APPEARANCE & ODOR: Blue solution with mild, non-residual odor3.HAZARD SPECIFICATIONSThese hazards are associated with the fluids contained in ACCU TEST CHECK PENS Reproductive Toxin Skin Hazard TLV=20 to 200ppmEye Hazard Kidney Toxin PEL=5ppm (8 hr weighted avg.)Sensitizer Toxic Agent EPA Hazardous Waste Class: n/aCombustible Liquid Skin Irritant DOT Hazard Class: n/a4.FIRE & EXPLOSION HAZARD DATAFlash Point: 108 F to 245 F, per ASTM D56; tag closed cup.Autoignition Temperature: n/aFlammability limits in air (by vol. At 200 F): 1.7% to 15.6%Extinguishing Media: Water fog recommended: CO2 dry chemical, and universal foam medi a, as applied by manufacturer’s recommendations, can also be used.Unusual Fire/Explosion Hazards: Can react with oxidizing materials.ACCU TEST CHECK PENS Page 25.HEALTH HAZARD DATA:Inhalation: Vapors are irritating to eyes, nose, and respiratory tract. May cause hea dache, nausea, vomiting, weakness.Skin Contact: May cause irritation. Wear protective gloves.Ingestion: See inhalation: can also cause breathing difficulty. Kidney damage may res ult from ingestion of large quantities of test solution.Skin absorption: Prolonged or widespread contact with skin may lead to absorption of harmful amounts of materials resulting in symptoms as described under ingestion. Eye Contact: Cause marked irritationSPECIAL WARING: pregnant women should not use this product; laboratory studies of ani mal subjects have shown birth defects, delayed fetal development, and increased fetal mortality at air concentrations of 150 to 200ppm.6.EMERGENCY AND FIRST AID PROCEDURES:Eyes: Flush liberally with running water. Call a physician.Skin: Immediately remove contaminated clothing. Thoroughly wash affected area with so ap and water.Inhalation: Remove to fresh air. If breathing if difficult, give oxygen and call a ph ysician.Ingestion: Give large quantities of water. Induce vomiting. Call a physician.7.REACTIVITY DATA:Decomposes partially at temperatures above 180 Celsius. Do not combine with concentra ted alkali at elevated temperatures.Hazardous combustion or decomposition products: CO, NHx.8.SPILL OR LEAK PROCEDURES:Absorb spill with paper toweling or vermiculite. Once absorbed, evaporate outdoors or incinerate in a chemical burner equipped with an after-burner and scrubber.Dispose of waste product by high temperature incineration, as approved under appropri ate federal, state and local legislation. Do not discharge without prior written appr oval from the appropriate health and environmental authorities.ACCU TEST CHECK PENS Page 39.SPECIAL PRECAUTIONS:NOT FOR USE AS A CONSUMER PRODUCT. FOR INDUSTRIAL USE ONLY.Keep this product away from heat and flame. Always use with adequate ventilation. Do not allow fluid to contact skin; wear gloves.WARNING TO PREGNANT WOMEN: Do not use ACCU TEST CHECK PENS unless exposure is extreme ly low. Even small amounts, if repeatedly inhaled, ingested, or absorbed through skin, may cause fetal malformations.10.HANDLING AND DISPOSAL GUIDE:ACCU TEST CHECK PENSFlexart Inks, Paints & Coatings, Inc. strongly recommends you wear protective gloves while using these test marker pens; skin contact presents the highest potential for e xposure under normal testing conditions. Eye protection and a laboratory coat or apro n are also good precautions.Ventilation must be adequate to ensure that vapors will not accumulate; and exhaust h ood is ideal, though not absolutely necessary as long as there is reasonable airflow in the test area.Spent material samples must be handled with care: Disposal of these contaminated mate rials also presents exposure hazards. We suggest you allocate one trash container exc lusively for dyne test waste; use an inner liner, keep it covered, and label the lid. “DO NOT HANDLE THIS WASTE WITHOUT PROTECTIVE GLOVES. AVOID SKIN CONTACT.”Outdated pens should be dispositioned by your in-house industrial waste expert via yo ur contracted waste handling firm. The EPA classifies the constituents of these pens as generic solvents, but your local regulations may be more stringent. ALWAYS REVIEW THE MSDS WITH YOUR WASTE- HANDLING FIRM TO ENSURE PROPER HADLING.While Flexart Inks, Paints & Coatings, Inc. believes the information contained herein is factual and the opinions expressed are those of qualified experts, this informati on is not to be taken as a warranty for which While Flexart Inks, Paints & Coatings, Inc. assumes legal responsibility. It is provided solely for consideration, investiga tion, and verification.FLEXART ACCU TEST CHECK PENS TESTING METHODSACCU-TEST CHECK PENS perform well on most non-absorptive materials.Do not touch or in any way contaminate the surface to be tested.Do not use contaminated or outdated ACCU-TEST CHECK PENS.Never retest the same location on a sample: move along the sample, or pull a new one. Store ACCU-TEST CHECK PENS at room temperature.Pull test sample. Make sure you pull a good sample specimen.For extruded film, one entire web cross-section should be okay. Do not touch the surf ace. Place the sample on a clean, level surface. Always go left to right in order to maintain the same consistency.Record ambient temperature and relative humidity. If sample temperature differs from ambient, allow it to stabilize.A minimum 3 sample points should be test: 1/4, 1/2 and 3/4 across the film section. I t is good practice to test the outer edges as well. For non-film materials, test loca tions must be determined in-house.Determination of wettingChoose a ACCU-TEST CHECK PEN, which you believe, is slightly lower than that of the s ubject material.1.1 Use a light touch to draw the pen across the test pen from left to right in two o r three parallel lines. Disregard the first pass.1.2 If the last swath remains wetted out on the test sample for three seconds or more, repeat the step 1.1 with the next higher dyne level pen. If the last ink swath beads up, tears apart, or shrinks into a thin line within on second or less, repeat step 1.1 with a lower level pen. If the ink swath holds for one to three seconds before losi ng its integrity, the dyne level of the pen closely matches that of the sample.This is relatively accurate surface energy measurement technique: used in standard 2 dynes/cm increments.To investigate discrepancies between obtained and expected results, a more precise me asurement method should be considered: application ACCU-TEST SOLUTION surface tension test fluids with cotton swabs (per ASTM D2578-84) or by use of a draw down rod is re commended. Alternatively, if results are suspect, replicate the test with a set of un used pens. This test method has proven itself on a wide variety of substrates: it is,however, more prone to contamination than some other techniques. We do offer Jumbo r efillable pens with replaceable wider nibs.* It always recommended that you two or mores pulled samples of the same specimen.*原文地址：达因液配置方法和测试方法作者：金伟_多层共挤VS达因液配置方法和测试方法1、使用方法：將達因筆垂直於薄膜平面，在薄膜表面上均勻畫一條直線，來判斷是否適合印刷加工要求。
达因笔是什么？怎么使用？
印刷中有很多地方需要测试薄膜的表面达因值，或者说是电晕值，来确定印刷出来的薄膜是否符合标准，但是有很多印刷厂商不知道如何去确定哪种达因笔好，或者如何去测试这个达因值,下面我来给大家提供一点本人的意见，有什么不当之处希望大家见谅，并愿意与大家交换意见！！达因笔（又叫表面张力测试笔，电晕笔，塑料薄膜测试笔，电晕值测试笔，达因测试笔等）可以准确测试薄膜表面达因值或表面润湿张力,为国外先进工艺技术生产。
使用方法：使电晕笔垂直于薄膜平面，加上适当的压力，在薄膜表面上画一条线。
量程稍小的达因笔较易画上直线，因此不须太大压力；而40、42、44的达因笔需在画线时多加一点压力。
一般情况下，初次测试为保测量的准确度，需备6支不同型号的达因笔；若确定薄膜表面张力度数字变化极小，则至少需要3支不同型号的达因笔分析结果：1、已经适当电晕处理的薄膜若画线很平均地分布，不起任何珠点，则说明该薄膜表面达因，高于或等于达因笔上所标出的指数2、没有适当电晕处理的薄膜若画线慢慢地收缩，则说明该薄膜表面达因，低于达因笔上所标出的指数。
3、没有电晕处理的薄膜若画线立即收缩，并且形成珠点，则说明该薄膜表面达因，极低于达因笔所标出的指数达因笔的种类很多，有英国舒曼达因测试笔，瑞典太阳电晕笔，日本太平洋达因笔，美国accu达因笔以及国产达因笔等，一般最受欢迎的就是英国舒曼达因笔，因为它拥有比较齐全的型号并且质量是同类当中最好的，在国内连续畅销20多年，是很多知名厂家的信得过产品！舒曼达因笔的规格主要有：小支的：38,40,42,44 套装的：32，34，36,46，48，50，52，54，56，58，59，61，63，65，67，69，71有些时候，可能是产品不过关，所以用达因笔测试不出来，这就要求我们在购买达因笔之前一定要将自己需要测试的物品情况向代理商或者经销商反映清楚，一般只要是正规的经销商都能给你提供最佳的方案。