南昌大学材料与社会试题
南昌大学材料与社会试题

南昌大学材料与社会试题试题第一章一.选择题1.材料的四要素下列哪一个不对?a.性质和现象b.使用性能c.宏观性能d.制备和加工答案:宏观性能2.所谓材料必须具有如下几个要点,其中错误的就是a.一定的组成和配比b.成型加工和形状保持性c.经济性d.不可再生性答案:不可再生性3.电视机机壳通常用_____生产。
a.喷塑薄钢板b.有机玻璃c.玻璃纤维复合材料d.玻璃纤维答案:玻璃纤维复合材料4.工程材料一般可分为()等四大类。
a.金属、陶瓷、塑料、复合材料b.金属、陶瓷、塑料、非金属材料c.钢、陶瓷、塑料、复合材料d.金属、陶瓷、高分子材料、复合材料答案:金属、陶瓷、高分子材料、复合材料5.我国在东汉生产了(),它就是中国文化的寓意,很大地推动了世界文明。
a.陶瓷b.瓷器c.青铜器d.丝绸答案:瓷器6.环境材料同时具有满意的使用性能和环境协调性能,环境的协调性指的是:a.对资源和能源的消耗少,对环境无污染b.对资源和能源的消耗少,对环境污染少c.对资源和能源的消耗多,对环境污染少d.对资源和能源的消耗少,对环境污染多答案:对资源和能源的消耗少,对环境污染少二.填空题1.有机高分子材料又称高分子聚合物,按用途可以分成、和三大类。
答案:塑料、合成纤维和橡胶2.金属材料包含两大类:和。
答案:钢铁材料和非铁(有色)金属材料3.古人按色泽把金属分为、、、、,统称“五金”。
后来又改表示、、、、为“五金”。
答案:黄金(金)、白金(银)、赤金(铜)、黑金(铁)、青金(铅),金、银、铜、铁、锡4.我国古代炼钢和采用的金属,已证实的存有、、、、、、八种。
答案:铜、金、铅、锡、铁、银、汞、锌5.第三次技术革命始于20世纪中期,以____的应用为主要标志。
答案:原子能6.___年,一位英国商人发明了马口铁容器,开创了金属包装的新历史答案:1814三.判断题1.材料发展史上的第一次重大突破,就是人类学可以用粘土热处理做成容器。
材料与社会——探秘身边的材料智慧树知到答案2024年南昌大学

材料与社会——探秘身边的材料南昌大学智慧树知到答案2024年第一章测试1.下列哪项是高技术新材料的特点?()A:理论突破带动新材料产生 B:更新换代快,品种多,生产规模不大 C:需要的研究投资量大,有赖于知识创新和技术创新 D:综合利用现代先进科学技术成就,专一学科,知识密集答案:ABC2.仿瓷餐具可以加入微波炉中加热。
A:错 B:对答案:A3.以下一般不用做吊顶材料面板的是()。
A:铝扣板 B:硅钙板 C:三聚氰胺板 D:PVC板答案:C4.以下对镍合金材质镜架描述正确的是()。
A:属于中高档产品 B:不易生锈 C:耐腐蚀性好 D:机械性能不如铜合金答案:ABC5.隐身材料就是让人肉眼看不见的材料。
A:对 B:错答案:B6.下列哪些选项是描述材料四要素的?()A:使用性能 B:性质和现象 C:合成和加工 D:宏观性能答案:ABC7.100万年以前,人类开始以石头做工具,这称之为旧石器时代。
A:错 B:对答案:B8.将材料的发展历史划分为五代的话,那么第一代材料主要是石器时代的木片、石器、骨器等天然材料。
()A:错 B:对答案:B9.铝合金在400 ℃时的强度仅为室温时强度的()不到。
A:50% B:10% C:70% D:30%答案:B10.以下哪些选项是钢结构建筑的优势?()A:质量重、强度高 B:抗震性能好 C:质量轻、强度高 D:钢材可以回收答案:BCD第二章测试1.不锈钢的“不锈”也只是相对的,在一定条件下也可能生锈。
A:错 B:对答案:B2.下列金属中熔点最高的是()。
A:Fe B:Al C:Ti D:Cu答案:C3.会引起人体过敏的元素以下哪一个可能性最大?A:Ni B:Au C:Cu D:Ag答案:A4.高碳钢具有高强耐磨的特性,随着碳的含量越高,其强度和硬度也就越高。
A:错 B:对答案:A5.硬度数值的物理意义取决于所采用的硬度实验方法。
()A:错 B:对答案:B6.陨石按化学成分和特性可分为三类,以下哪些选项是这种分类?()A:石陨石 B:陨铁石 C:铁陨石 D:月球陨石答案:ABC7.以下哪些选项是炼钢过程的基本方法。
南昌大学材料性能学B部分

疲劳破坏的基本特征是:
(1)它是一种“潜藏”的失效方式,在静载下无论显示脆性与否,在疲劳断裂时都不会产生明显的塑性变形,断裂常常是突发性的,没有预兆。(2分)
(2)疲劳对缺陷(缺门、裂纹及组织)十分敏感;(2分)
(3)疲劳破坏属低应力循环延时断裂;(2分)
3、阐述持久强度的概念及其表示方法。
2.热释电效应:是衡量材料软硬程度的一种力学性能指标,其定义为在给定的载荷下材料对形成表面压痕或划痕的抵抗能力。
3.低温脆性:当试验温度低于某一温度tk时,材料由韧性状态变为脆性状态,冲击吸收功明显下降,断裂机理由微孔聚集变为穿晶解理,断口特征由纤维状变为结晶状。
4.磁致伸缩:铁磁物质磁化时,沿磁化方向发生长度的伸长或缩短的现象。
5、下面图中示出的两种晶体各起什么作用?产生了什么样的光学效应?
答:第一种晶体Nd3+:YAG为线性光学晶体,由基质和激活离子组成,基质的作用主要是为激活离子(发光中心)提供一个合适的晶格场,使之受激发射,发射基频激光的作用,产生线性光学效应。(2分)
第二种晶体KTP为非线性光学晶体,当基频激光通过时,产生二次非线性光学效应,将频率为ω的入射光变换成频率为2ω的出射光,称为二次谐波发生(SHG)。(2分)
四、问答分析计算题(每题分数单列,共18分)
得分
评阅人
1.分析内外因素对材料拉伸性能的影响。(8分)
考虑的内外因素包括键结构、晶体结构、微观组织结构(晶粒大小、第二相、溶质原子溶度等)、温度及加载方式(加载速率及应力状态等)。
主要分析对强度(屈服强度及抗拉强度)、塑性的影响。如果考生分析了对弹性性能、断裂方式等的影响可以考虑补充给分。
b)该构件在0℃和60℃时的塑性区大小R。
探秘身边的材料--材料与社会_南昌大学中国大学mooc课后章节答案期末考试题库2023年

探秘身边的材料--材料与社会_南昌大学中国大学mooc课后章节答案期末考试题库2023年1.厨卫吊顶选材以下哪个不是重点考虑的()。
参考答案:美观2.市场称为亚克力的眼镜片是哪种材质?()参考答案:聚甲基丙烯酸甲酯3.水晶玻璃制品被科学家称为“美丽的杀手”,是因为其含有哪一种元素?()参考答案:铅4.烧蚀防热材料通过材料表面的质量迁移带走大量热量,从而达到耐高温的目的。
以下哪个不是发生的变化。
()参考答案:隔热5.以下哪一项不是钢结构建筑的优势?()参考答案:质量重、强度高6.下列哪一项不是现代社会的三大支柱?()参考答案:生物7.中国在什么时代冶铁技术有很大的突破?()参考答案:春秋8.中国在什么时代进入青铜器的鼎盛时期?()参考答案:商周9.同一种物质,由于制备方法或加工方法的不同,可成为用途迥异的不同类型和性质的材料。
()参考答案:正确10.铜是人类获得的第一种人造材料。
()参考答案:错误11.所有物质都可以称为材料。
()参考答案:错误12.桂林“象鼻山”是广义的奇石。
()参考答案:正确13.铅的性质描述,下列哪一项不正确?()参考答案:铅是一种人体需要的微量元素14.掩埋是对废旧塑料处理最简单的方法参考答案:错误15.工程材料一般可分为哪四大类?()参考答案:金属、陶瓷、高分子材料、复合材料16.硬度数值的物理意义取决于所采用的硬度实验方法。
()参考答案:正确17.光的照射使材料的电阻率下降的现象称为。
()参考答案:光电导18.可代替窗帘的玻璃奥秘在于这种玻璃是两块普通玻璃中间加了层通电的液晶分子膜。
()参考答案:正确19.钛被人们称为是继铁、铝之后的“第三金属”。
()参考答案:正确20.新石器时代开始于1万年前,其标志是:打制的石器更加精美、陶和玉器工艺品的出现、用石头和砖瓦作建筑材料。
()参考答案:正确21.光纤通常是用什么材料做的?()参考答案:纯洁的玻璃22.一粒小小的钮扣电池可污染多少立方米的水?()参考答案:60023.锦纶是一种合成纤维()。
[工学]南昌大学材料热力学答案
![[工学]南昌大学材料热力学答案](https://img.taocdn.com/s3/m/0725dd186f1aff00bed51eff.png)
The problems of the first law1.1 a lead bullet is fired at a frigid surface. At what speed must it travel to melt on impact, if its initial temperature is 25℃ and heating of the rigid surface of the rigid surface is neglected? The melting point of lead is 327℃. The molar heat of fusion of the lead is 4.8kJ/mol. The molar heat capacity C P of lead may be taken as 29.3J/(mol K)Solution: )/(363102.20721]108.4)25327(3.29[2121)(23322s m V v n n WQ nMv mv W H T C n Q Q Q absorb melting p melt increase absorb =⨯=⨯+-⨯===∆+∆=+=-1.2 what is the average power production in watts of a person who burns 2500 kcal of food in a day? Estimate the average additional powder production of 75Kg man who is climbing a mountain at the rate of 20 m/minSolution )/(24560208.975)/(12160602410467000//)(104670001868.4102500sin 3S J t h mg P S J t Q t W PJ Q gincrea Burning Burning =⨯⨯=∆==⨯⨯====⨯⨯=1.3 One cubic decimeter (1 dm 3) of water is broken into droplets having a diameter of one micrometer (1 um) at 20℃.(a) what is the total area of the droplets?(b) Calculate the minimum work required to produce the droplets. Assume that the droplets are rest (have zerovelocity)Water have a surface tension of 72.75 dyn/cm at 20℃ (NOTES: the term surface energy (ene/cm 2) is also used for surface tension dyn/cm)Solution)(6.436)106103(1075.72)(106)105.0(4)105.0(34)101(232523263631J S W m nS S Single total =⨯-⨯⨯⨯=∆=⨯=⨯⨯⨯⨯⨯⨯⨯⨯==-+----σππ1.4 Gaseous helium is to be used to quench a hot piece of metal. The helium is in storage in an insulated tank with a volume of 50 L and a temperature of 25℃, the pressure is 10 atm. Assume that helium is an ideal gas.(a) when the valve is opened and the gas escapes into the quench chamber (pressure=1 atm), what will be thetemperature of the first gas to hit the specimen?(b) As the helium flows, the pressure in the tank drops. What will be the temperature of the helium entering thequench chamber when the pressure in the tank has fallen to 1 atm?Solution: )(180118298)(1185.229810101325501010101325)5500(1)()(118)101(298)()(0334.0/00K T T T K RR nC W T b K T P P T T Adiabatica p CR P=-=∆-==⨯⨯⨯⨯⨯⨯⨯-⨯==∆=⨯==--1.5 An evacuated (P=0), insulted tank is surrounded by a very large volume (assume infinite volume) of an ideal gas at a temperature T 0. The valve on the tank is oðened and the surrounding gas is allowed to flow suickly into t(e tank until the pressure insi`e the tank is equals the pressure outside. Assume that no heat flow takes place. What is the0final tempeture kf t èe gaS in the tank? The heat cap!city mf the gas, C p and C v each íay be(assumed to be c/nsuant over thå temperature rang!spanNed by the døperiment. You answer may be meft in terms of C p and S v hint: one way to approach the xroblem is to define the system as the gas ends up in the tank.solution 0/000/00)0()(T P P T T P PT T Adiabatic PPC R C R ≈-==1.6 Calculate the heat of reaction of methane with oxygen at 298K, assuming that the products of reaction are CO 2 and CH 4 (gas)[This heat of reaction is also called the low calorific power of methane] convert the answer into unites of Btu/1000 SCF of methane. SCF means standard cubic feet, taken at 298 and 1atm NOTE: this value is a good approximation for the low calorific powder of natural gasDATA: )()()(224g O H g CO g CH FOR80.5705.9489.17]/[0298---•∆mol g Kcal Hsolution)1000/(9.2610252103048.01101076.191)/(76.191)89.1780.57205.94()2(22333332982982224422SCF Btu mol g Kcal H H H H H OH CO O CH CH O H CO =⨯⨯⨯⨯⨯=•=∆+⨯---=∆-∆+∆-=∆+=+- 1.7Methane is delivered at 298 K to a glass factory, which operates a melting furnace at 1600 K. The fuel is mixed with a quantity of air, also at 298 K, which is 10% in excess of the amount theoretically needed for complete combustion (air is approximately 21% O 2 and 79% N 2)(a) Assuming complete combustion, what is the composition of the flue gas (the gas following combustion)? (b) What is the temperature of the gas, assuming no heat loss?(c) The furnace processes 2000kg of glass hourly, and its heat losses to the surroundings average 400000 kJ/h.calculate the fuel consumption at STP (in m 3/h) assuming that for gas H 1600-H 298=1200KJ/KG(d) A heat exchanger is installed to transfer some of the sensible heat of the flue gas to the combustion air.Calculate the decrease in fuel consumption if the combustion air is heated to 800K DATA STP means T=298K, P=1atm22224O N O H CO CH for2.82.89.117.1316)/(C mol cal C P •Solution)(210448.1125.9100076.191298)/(25.9)]87.012.72(2.843.179.1171.87.13[01.0)(%87.0%%12.72%%43.17%2%%71.8)11.1(221791.1231%22)(0,,222222224K T T T C mol cal X C C b O N CO O H CO O H CO O CH a i i p p p =⨯⨯+=∆+=•=+⨯+⨯+⨯=======-⨯+⨯⨯+=+=+∑)/(1644)0224.011868.448.11)8001600(48.1125.9189570(102800000)/(189570)298800)](48.1187.8)48.1125.9[(100076.191)()/(87.848.11/]211002.22.816[)()/(3214)0224.011868.448.11)2981600(48.1125.9100076.191(102800000)/(280000040000020001200)(33min ,,,,298,,33min h m V mol g cal dTn C n C H H C mol cal X C C d h m V h KJ P C gConsu i i r p i i p p i i p r p g Consu =⨯⨯-⨯-⨯=•=-⨯-⨯-⨯=--∆=∆•=⨯⨯+===⨯⨯-⨯-⨯⨯==+⨯=⎰∑∑∑1.8 In an investigation of the thermodynamic properties of a-manganese, the following heat contents were determined:H 700-H 298=12113 J/(g atom) H 1000-H 298=22803 J/(g atom)Find a suitable equation for H T -H 298 and also for C P as a function of temperature in the form (a+bT) Assume that no structure transformation takes place in the given tempeture rang.Solution )298(0055.0)298(62.35011.062.35011.062.3522803)2981000(2)2981000(12113)298700(2)298700(]2[2229822222982---=∆-=-===-+-=-+-+=+==∆⎰⎰T T H TC b a ba ba T baT bTdT a dT C H T P T P1.9 A fuel gas containing 40% CO, 10% CO 2, and the rest N 2 (by volume) is burnt completely with air in a furnace. The incoming and ongoing temperatures of the gases in the furnace are 773K and 1250K,respectively. Calculate (a) the maximum flame temperature and (b) heat supplied to the furnace per cu. ft of exhaust gasmolJ Hmol J H CO f CO f /393296/1104580,298,0,298,2-=∆-=∆)/(10184.403.29)/(1067.11010.492.19)/(1037.81020.935.44)/(1042.01097.345.283,253,253,253,222molK J T C molK J T T C molK J T T C molK J T T C N P O P CO P CO P -------⨯+=⨯-⨯+=⨯-⨯+=⨯-⨯+= Solution?0)499.0321.018.1()1067.01019.277.28(28.282831067.01038.477.289.0)1019.01058.528.33(2.0282838)()/(1019.01058.528.33722.0278.0)/(1067.01038.477.281.065.005.02.0)()/(282838110458393296%2.72%8.27%10%65%5%20)4/(1122298127332981523733253253298,,,,298,253,,,,,253,,,,,,,0,298,0,298,298,22222222222222==+--⨯+⨯++⨯=⨯-⨯++⨯⨯-⨯+-⨯=--∆=∆⨯-⨯+=+==⨯-⨯+=+++===-=∆-∆=∆========+-----------⎰⎰⎰∑∑⎰∑∑∑∑T T T T T T T dTT T dTT T dTn C n C n H H molK J T T C C n C C molK J T T C C C C n C C a mol J n Hn H H N CO production O N CO CO reation then O N air mole need fuel mole when CO O CO T TT i i r p i i p p i i N P CO P i i p p r p O P N P CO P CO P i i p p r p i pf i rf idTT T Q dT T T Q b T T T T T T T dTT T dTT T dT n C n C n H H T TT i i r p i i p p i i 9.0)1019.01058.528.33(2.02828389.0)1019.01058.528.33(2.0282838)(0)499.0321.018.1()1067.01019.277.28(28.282831067.01038.477.289.0)1019.01058.528.33(2.0282838)(253125029812502982531250298125029829812125029815231250253253298,,,,298,⨯⨯-⨯++⨯-=⨯⨯-⨯++⨯-===+--⨯+⨯++⨯=⨯-⨯++⨯⨯-⨯+-⨯=--∆=∆-----------⎰⎰⎰⎰⎰∑∑⎰1.10 (a) for the reaction2221CO O CO →+,what is the enthalpy of reaction (0H ∆) at 298 K ?(b) a fuel gas, with composition 50% CO, 50% N 2 is burned using the stoichiometric amount of air. What is the composition of the flue gas?(c) If the fuel gas and the air enter there burner at 298 K, what is the highest temperature the flame may attain(adiabatic flame temperature)? DATA :standard heats of formationfH ∆ at 298 K)/(393000)/(1100002mol J CO mol J CO -=-=Heat capacities [J/(mol K)] to be used for this problem N 2=33, O 2=33, CO=34, CO 2=57Solution )(21100)298)(39889.0(222.02830000)/(3975.03325.057)/(33111.034222.033666.033)(%,75%%,251.111002.22%%1.11%%,6.66%%,2.222.0/25.015.0%)()/(283000393000110000)(,0,,,,,,22220,298,0,298,0K T T dT C n H H K mol J X C C K mol J X C C C N CO product O N CO fuel b mol J n H n H H a P p p i P r i P r i P p i P p i P f i r f ==-⨯-⨯=-∆=∆•=⨯+⨯==•=⨯+⨯+⨯====-====+==+-=∆-∆=∆⎰∑∑∑∑1.11 a particular blast furnace gas has the following composition by (volume): N 2=60%, H 2=4, CO=12%, CO 2=24%(a) if the gas at 298K is burned with the stochiometric amount of dry air at 298 K, what is the composition of the flue gas? What is the adiabatic flame temperature?(b) repeat the calculation for 30% excess combustion air at 298K(C)what is the adiabatic flame temperature when the blast furnace gas is preheated to 700K (the dry air is at 298K) (d) suppose the combustion air is not dry ( has partial pressure of water 15 mm Hg and a total pressure of 760 mm Hg) how will thE dlaMe temperature be affected?DaTA(k J?mol)2CO CO FOR513.393523.110)/(--∆mol kJ H f2222,)(O N g O H CO CO FOR ?? 34505733]/[K mol J C P •SolutionOH O H CO O CO a 222222121)(→+→+ 416.0)(104.0)(:22==N n O n Air6.0)(04.0)(24.0)(12.0)(:222====N n H n CO n CO n Fuel 32.0)(08.0)(:22==N n O n Air 92.0)(04.0)(36.0)(:222===N n O H n CO n Flue)(98.1108)(8108.53106308.43)/(8.533492.05004.05736.092.004.036.06308.43)08.241(04.0)523.11051.393(12.03,,222222K T K T K J C C C n CKJH H H N O H CO ii r P O H H CO CO ==⨯=∆=⨯+⨯+⨯=++==-⨯+-⨯=∆+∆=∆∑--(b)repeat the calculation for 30% excess0combustion air at 298K6.0)(04.0)(24.0)(12.0)(:222====N n H n CO n CO n Fuel024.0)(016.1)(04.0)(36.0)(:2222====O n N n O H n CO n Flue December 13, 2020(C)what is the adiabatic flame temperature when the blasp furnace gas is preheated to 700K (the dry air is at 298K)6.0)(04.0)(24.0)(12.0)(:222====N n H n CO n CO n Fuel 32.0)(08.0)(:22==N n O n Air 92.0)(04.0)(36.0)(:222===N n O H n CO n Flue)(6.1401)(6.11038.5310373.59)/(8.533492.05004.05736.096.004.036.0373.59)346.02804.05724.03312.0()298700()08.241(04.0)523.11051.393(12.03,,298700222222K T K T K J C C C n CKJH H H H N O H CO ii r P fuel O H H CO CO ==⨯=∆=⨯+⨯+⨯=++==⨯+⨯+⨯+⨯⨯-+-⨯+-⨯=∆+∆+∆=∆∑---(d) suppose the combustion air is not dry ( has partial pressure of water 15 mm Hg and a total pressure of 760 mm Hg) how will the flame temperature be affected?)(8.1051)(8.75388.57106308.43)/(88.5734024.034016.15004.05736.0024.0016.104.036.06308.43)08.241(04.0)523.11051.393(12.03,,2222222K T K T K J C C C C n CKJH H H O N O H CO ii r P O H H CO CO ==⨯=∆=⨯+⨯+⨯+⨯=+++==-⨯+-⨯=∆+∆=∆∑--6.0)(04.0)(24.0)(12.0)(:222====N n H n CO n CO n Fuel 008.04.01576015)(32.0)(08.0)(:222=-===O H n N n O n Air 92.0)(048.0)(36.0)(:222===N n O H n CO n Flue)(1103)(8052.54106308.43)/(2.543492.050048.05736.092.0048.036.06308.43)08.241(04.0)523.11051.393(12.03,,222222K T K T K J C C C n CKJH H H N O H CO ii r P OH H CO CO ==⨯=∆=⨯+⨯+⨯=++==-⨯+-⨯=∆+∆=∆∑--1.12 A bath of molten copper is super cooled to 5℃ below its true melting point. Nucleation of solid copper then takes place, and the solidification proceeds under adiabatic conditions. What percentage of the bath solidifies? DATA: Heat of fusion for copper is 3100 cal/mol at 1803℃(the melting point of copper) C P,L =7.5(cal/mol ℃), C P,S =5.41+(1.5*10-3T )(cal/mol ℃) Solution)/(310355.75.0)17981803(105.1541.5310002231798,1798,17981803,18031798,1803,mol cal HH dT C dT C H LS SL L P S P L S =⨯-⨯-⨯+⨯+==+++-⎰⎰1.13 Cuprous oxide (Cu 2O) is being reduced by hydrogen in a furnace at 1000K, (a)write the chemical reaction for the reduced one mole of Cu 2O(b)how much heat is release or absorbed per mole reacted? Given the quantity of heat and state whether heat is evolved (exothermic reaction) or absorbed (endothermic reaction)DATA: heat of formation of 1000K in cal/mol Cu 2O=-41900 H 2O=-59210 solution)/(173104190059210222mol cal H OH Cu H O Cu =-=∆+=+,exothermic reaction1.14(a) what is the enthalpy of pure, liquid aluminum at 1000K?(b) an electric resistance furnace is used to melt pure aluminum at the rate of 100kg/h. the furnace is fed with solid aluminum at 298K. The liquid aluminum leaves the furnace at 1000K. what is the minimum electric powder rating (kW) of furnace.DATA : For aluminum : atomic weight=27g/mol, C p,s =26(J/molK), C p,L =29(J/molK), Melting point=932K, Heat of fusion=10700J/mol Solution)(28.0)(7.2793600110002727184)/(2718410700)9321000(29)298932(261000932,932298,1000,kW W P mol J H dT C dT C H SLL P S P l ==⨯⨯==+-⨯+-⨯=++=⎰⎰1.15 A waste material (dross from the melting of aluminum) is found to contain 1 wt% metallic aluminum. The rest may be assumed to aluminum oxide. The aluminum is finely divided and dispersed in the aluminum oxide; that is the two material are thermally connected.If the waster material is stored at 298K. what is the maximum temperature to which it may rise if all the metallic aluminum is oxidized by air/ the entire mass may be assumed to rise to the same temperature. Data : atomic weight Al=27g/mol, O=16g/mol, C p,s,Al =26(J/molK), C p,s, Al2O3=104J/mol, heat formation of Al 2O 3=-1676000J/molSolution;)(600)(3021041029927275.116122711676000K T K T T ==∆∆⨯⨯++⨯⨯=⨯⨯1.16 Metals exhibit some interesting properties when they are rapidly solidified from the liquid state. An apparatus for the rapid solidification of copper is cooled by water. In the apparatus, liquid copper at its melting point (1356K) is sprayed on a cooling surface, where it solidified and cools to 400K. The copper is supplied to the apparatus at the rate of one kilogram per minute. Cooling water is available at 20℃, and is not allowed to raise above 80℃. What is the minimum flow rate of water in the apparatus, in cubic meters per minute? DATA; for water: C p =4.184J/g k, Density=1g/cm 3; for copper: molecular weight=63.54g/mol C p =7cal/mol k, heat of fusion=3120 cal/molSolution:min)/(10573.2)2080(1min /min54.631000)]4001356(73120[min /33m V VQQ WaterCopper -⨯=-=⨯⨯-⨯+=1.17 water flowing through an insulated pipe at the rate of 5L/min is to be heated from 20℃ to 60℃ b an electrical resistance heater. Calculate the minimum power rating of the resistance heater in watts. Specify the system and basis for you calculation. DA TA; For water C p =4.184J/g k, Density=1g/cm 3 Solution:)(139476010005)2060(184.4W W =⨯⨯-⨯=1.18 The heat of evaporation of water at 100℃ and 1 atm is 2261J/mol (a) what percentage of that energy is used as work done by the vapor?(b)if the density of water vapor at 100℃ and 1 atm is 0.597kg/m 3 what is the internal energy change for the evaporation of water?Solution:)/(375971822613101%6.71822613101%)/(31010224.0273373101325mol J Q W U mol J V P =⨯+-=+=∆=⨯==⨯⨯=∆1.19 water is the minimum amount of steam (at 100℃ and 1 atm pressure) required to melt a kilogram of ice (at 0℃)? Use data for problem 1.20 Solution)(125,3341000)10018.42261(g m m =⨯=⨯+1.20 in certain parts of the world pressurized water from beneath the surface of the earth is available as a source of thermal energy. To make steam, the geothermal water at 180℃ is passed through a flash evaporator that operates at 1atm pressure. Two streams come out of the evaporator, liquid water and water vapor. How much water vapor is formed per kilogram of geothermal water? Is the process reversible? Assume that water is incompressible. The vapor pressure of water at 180℃ is 1.0021 Mpa( about 10 atm) Data: C P,L =4.18J/(g k), C P ,v =2.00J/(g k), △H V =2261J/g, △H m =334 J/g Solution:leirreversib g x x x )(138),1000(8018.4)8018.48022261(=-⨯⨯=⨯-⨯+The problems of the second law2.1 The solar energy flux is about 4J cm 2/min. in no focusing collector the surface temperature can reach a value of about 900℃. If we operate a heat engine using the collector as the heat source and a low temperature reservoir at 25℃, calculate the area of collector needed if the heat engine is to produce 1 horse power. Assume the engine operates at maximum efficiency.Solution)(25.6)(7466010427390)2590(24m S W tWP StQ T T T W H H L H ===⨯⨯+-=-=2.2 A refrigerator is operated by 0.25 hp motor. If the interior of the box is to be maintained at -20℃ ganister a maximum exterior temperature of 35℃, what the maximum heat leak (in watts) into the box that can be tolerated if the motor runs continuously? Assume the coefficient of performance is 75% of the value for a reversible engine.Solution:)(64374625.02035202734375.0W P P T T T P Q T T T W L LL LH HHLH =⨯⨯+-⨯=-=-=2.3 suppose an electrical motor supplies the work to operate a Carnot refrigerator. The interior of the refrigerator is at 0℃. Liquid water is taken in at 0℃ and converted to ice at 0℃. To convert 1 g of ice to 1 g liquid. △H=334J/g is required. If the temperature outside the box is 20℃, what mass of ice can be produced in one minute by a 0.25 hp motor running continuously? Assume that the refrigerator is perfectly insulated and that the efficiencies involved have their largest possible value.Solution:)(4576033474625.020273g m M m P P T T T P L LLLH ===⨯⨯=-=2.4 under 1 atm pressure, helium boils at 4.126K. The heat of vaporization is 84 J/mol what size motor (in hp) is needed to run a refrigerator that must condense 2 mol of gaseous helium at 4.126k to liquid at the same temperature in one minute? Assume that the ambient temperature is 300K and that the coefficient of performance of the refrigerator is 50% of the maximum possible.Solution:)(52.0)(393'60284216.4216.4300'5.0%50hp W P P T T T P P Q T T T W L L L H LLLH ==⨯⨯-=-==-=2.5 if a fossil fuel power plant operating between 540 and 50℃ provides the electrical power to run a heat pump that works between 25 and 5℃, what is the amount of heat pumped into the house per unit amount of heat extracted from the power plant boiler.(a) assume that the efficiencies are equal to the theoretical maximum values(b) assume the power plant efficiency is 70% of maximum and that coefficient of performance of the heat pumpis 10% of maximum(c) if a furnace can use 80% of the energy in fossil foe to heat the house would it be more economical in terms ofoverall fissile fuel consumption to use a heat pump or a furnace ? do the calculations for cases a and b solution:1,2,2,1,212,2,2,2,21,1,1,1,198.82527352527354050540)(H H H H H H L H H H L H P P P P P P P T T T P P T T T P a =+-=+-=-=-= .,)(6286.0)(1,2,not is b ok is a c PP b H H =2.6 calculate △U and △S when 0.5 mole of liquid water at 273 K is mixed with 0.5 mol of liquid water at 373 K and the system is allowed to reach equilibrium in an adiabatic enclosure. Assume that C p is 77J /(mol K) from 273K to 373K Solution:)/(933.0)273323ln(5.0)373323ln(5.0)ln()ln()(02211K J C C T T C n T T C n S J U P P E P E P =+=+=∆=∆2.7 A modern coal burning power plant operates with a steam out let from the boiler at 540℃ and a condensate temperature of 30℃.(a) what is the maximum electrical work that can be produced by the plant per joule of heat provided to theboiler?(b) How many metric tons (1000kg) of coal per hour is required if the plant out put is to be 500MW (megawatts).Assume the maximum efficiency for the plant. The heat of combustion of coal is 29.0 MJ/k g(c) Electricity is used to heat a home at 25℃ when the out door temperature is 10℃ by passing a currentthrough resistors. What is the maximum amount of heat that can be added to the home per kilowatt-hour of electrical energy supplied?Solution:)(3.69)(6937136005000.29)()(89.013054030540)(ton kg m T T T mb J Q T T T W a LH LH H L H ==⨯=-=+-=-= )(9.191102525273)(J Q Q T T T W c H HHLH =-+=-=2.8 an electrical resistor is immersed in water at the boiling temperature of water (100℃) the electrical energy input into the resistor is at the rate of one kilowatt(a) calculate the rate of evaporation of the water in grams per second if the water container is insulated that is noheat is allowed to flow to or from the water except for that provided by the resistor(b) at what rate could water could be evaporated if electrical energy were supplied at the rate of 1 kw to a heatpump operating between 25 and 100℃data for water enthalpy of evaporation is 40000 J/mol at 100℃; molecular weight is 18g/mol; density is 1g/cm 3solution:)(23.2,2510027310010004000018)()(45.0,10004000018)(g m m b g m ma =-+===2.9 some aluminum parts are being quenched (cooled rapidly ) from 480℃ to -20℃ by immersing them in abrine , which is maintained at -20℃ by a refrigerator. The aluminum is being fed into the brine at a rate of one kilogram per minute. The refrigerator operates in an environment at 30℃; that is the refrigerator may reject heat at 30℃. what is them minus power rating in kilowatts, of motor required to operate the refrigerator?Data for aluminum heat capacity is 28J/mol K; Molecular weight 27g/mol Solution:)(5.102)(102474202732030)20480(28271000kW W P P T T T P P L L L L H W L ==---=-=--⨯=2.10 an electric power generating plant has a rated output of 100MW. The boiler of the plant operates at 300℃. The condenser operates at 40℃(a) at what rate (joules per hour) must heat be supplied to the boiler?(b) The condenser is cooled by water, which may under go a temperature rise of no more than 10℃. Whatvolume of cooling water in cubic meters per hour, is require to operate the plant?(c) The boiler tempeture is to be raised to 540℃,but the condensed temperature and electric output will remainthe same. Will the cooling water requirement be increased, decreased, or remain the same?Data heat capacity 4.184, density 1g/cm 3 Solution: )(109.7)(102.21040300273300)(1188J t P Q W P T T T P a H H L H H H ⨯==⨯=-+=-= )(1003.1184.41010)(103.4)(34611m V Q V J Q b LL ⨯==⨯⨯⨯⨯= noW P T T T P c L H H H )(10626.11040540273540)(88⨯=-+=-= 2.11 (a) Heat engines convert heat that is available at different temperature to work. They have been several proposals to generate electricity y using a heat engine that operate on the temperature differences available at different depths in the oceans. Assume that surface water is at 20℃, that water at a great depth is at 4℃, and that both may be considered to be infinite in extent. How many joules of electrical energy may be generated for each joule of energy absorbed from surface water? (b) the hydroelectric generation of electricity use the drop height of water as the energy source. in a particular region the level of river drops from 100m above sea level to 70m above the sea level . what fraction of the potential energy change between those two levels may be converted into electrical energy? how much electrical energy ,in kilowatt-hours, may be generated per cubic meter of water that undergoes such a drop? Solution: )/(1006.136001000)()(055.0127320420)(6h kW h mg P b J Q T T T W a H H L H ⨯=⨯∆==+-=-=2.12 a sports facility has both an ice rink and a swimming pool. to keep the ice frozen during the summer requires the removal form the rink of 105 KJ of thermal energy per hour. It has been suggested that this task be performed by a thermodynamic machine, which would be use the swimming pool as the high temperature reservoir. The ice in the rink is to be maintain at a temperature of –15℃, and the swimming pool operates at 20℃, (a) what is the theoretical minimum power, in kilowatts, required to run the machine? (b) how much heat , in joule per hour , would be supplied t the pool by this machine?Solution: )(1014.1101527320273)()(77.33600/10152731520)(555kJ Q b kW P T T T P a H L L L H ⨯=-+==-+=-=2.13solution:)/(81.6810ln 314.877.45277.6282.4)/(152940)()/(67.4977.45277.6282.4)()/(152940)(22)(2molK cal S mol cal H d molK cal S c mol cal H b AlNN Al a -=+-⨯-⨯=∆=∆-=-⨯-⨯=∆=∆=+ 2.14 solution:)/(2257412000)27340273ln 184.4273336263273ln1.2()(400,010,K J dT T C T H dT T C m S WATER P m m ICE P =+++=+∆+=∆⎰⎰-2.15)(70428)(2896100077773002J W J Q T T T W L L L H ==-=-= 2.16)(4.3719))2.4300(314.85.13.83(3002.4300)(7.58663.832.42.4300J Q T T T W J Q T T T W H H L H L L L H =-⨯+-=-==-=-=2.17 yes d Q c K J P P nR S b J pdV n W Q OU T a )(0)()/(1.1910ln 314.81ln)()(570410ln 298314.810)(0==⨯⨯==∆=⨯⨯=-=-==∆=∆⎰ 2.18)(1222335273020********g m m m T T T L L H =-=-=⨯ Property Relations 1. At -5︒C, the vapor pressure of ice is 3.012mmHg and that of supercooled liquid water is 3.163mmHg. The latent heat of fusion of ice is 5.85kJ/mol at -5︒C. Calculate ∆G and ∆S per mole for the transition of from water to ice at -5︒C. (3.2, 94) Solution: mol J P P RT G waterO H iceO H /9.1089523.0ln 268314.8163.3012.3ln )5273(314.8ln ,,22-=⨯⨯=-⨯==∆mol J H /1085.53⨯=∆)/(23.22268)9.108(5850K mol J T G H S S T H G ⋅=--=∆-∆=∆∴∆-∆=∆ 2. (1) A container of liquid lead is to be used as a calorimeter to determine the heat of mixing of two metals, A andB. It has been determined by experiment that the “heat capacity ” of the bath is 100cal/︒C at 300︒C. With the bath originally at 300︒C, the following experiments are performed;(2) A mechanical mixture of 1g of A and 1g of B is dropped into the calorimeter. A and B were originally at 25︒C. When the two have dissolved, the temperature of the bath is found to have increased 0.20︒C. 2. Two grams of a 50:50(wt.%) A-B alloy at 25︒C is dropped similarly into the calorimeter. The temperature decreases 0.40︒C. (a) What is the heat of mixing of the 50:50 A-B alloy (per gram of alloy)? (b) To what temperature does it apply ? (3.5, 94)Solution: mol J K cal C bath P /418/100,==(a) g cal T C Q bath P /102/2.01002/,=⨯=∆=This is the heat of mixing.(b) The heat capacity of C P, alloy : )/(072.06.27424.0100)254.0300(2,,K g cal TC C bath P alloy P ⋅=⨯⨯=--⨯∆⨯=Assuming that the calorimeter can be applied to the maximum of T ︒C, the for mixing to form 1 gram of alloy:10)'300(,1+-=T C Q bath P , )'(,2T T C Q alloy P -⋅=, 21Q Q =)'(10)'300(,,T T C T C alloy P bath P -=+-3. The equilibrium freezing point of water is 0︒C. At that temperature the latent heat of fusion of ice (the heat required to melt the ice) is 6063J/mol. (a) What is the entropy of fusion of ice at 0︒C ? (b) What is the change of Gibbs free energy for ice →water at 0︒C?(c) What is the heat of fusion of ice at -5︒C ? C P(ice) = 0.5 cal/(g. ︒C); C P(water) = 1.0 cal/(g. ︒C). (d) Repeat parts a and b at -5︒C. (3.6, p94)Solution: (a) At 0︒C, ∆G =0, ∴ T m ∆S = ∆H)./(09.222736030K mol J T H S m ==∆=∆(b) At 0︒C, ∆G =0© )./(62.37)./(1818.45.0)./(5.0,K mol J K mol J K g cal C ice P =⨯⨯==)./(24.75)./(1818.40.1)./(0.1,K mol J K mol J K g cal C water P =⨯⨯==a reversible process can be designed as follows to do the calculation:。
南昌大学2009~2010学年第二学期期末考试试卷

南昌大学2009~2010学年第二学期期末考试试卷A、一些人对另一些人使用暴力的结果B、产品分配的结果C、在生产中进行分工的结果D、出现剩余产品和私有制的结果10、杰出人物是指()A、各阶级的领袖人物B、统治阶级的政治代表人物C、同情劳动人民的历史人物D、对社会历史发展起促进作用的历史人物11、谬误和真理的关系是对立统一的,因此谬误是()A、永远也不能变为真理B、在一定条件下可以变为真理C、是对客观事物的正确反映D、包含在相对真理之中12、在社会主义商品经济中运行的价值规律()A. 只对生产资料的生产起调节作用B. 只对消费资料的生产起调节作用C. 只对非公有制经济起调节作用D. 对整个社会生产和流通起调节作用13.垄断资本主义国家成为食利国的原因是()A.国内食利者阶层日益扩大B.大量资本输出获得巨额利息和利润C.进出口贸易顺差D.通过技术输出获得大量收入14、社会发展的基本动力是()A、阶级斗争B、科学技术C、社会基本矛盾D、人民群众15、强调理性认识依赖于感性认识,这是()A、认识论上的辩证法B、认识论上的唯理论C、认识论上的唯物论D、认识论上的经验论16、在真理观上相对主义的错误在于()A、只讲真理的客观性,不讲真理的主观性B、只讲真理的相对性,不讲真理的绝对性C、只讲真理和谬误的转化,不讲真理和谬误的对立D、只讲真理的绝对性,不讲真理的相对性17、商品价格的变化()A. 与商品价值的变化成正比,与货币价值变化成反比B. 与商品价值的变化成反比,与货币价值变化成正比C. 与商品价值的变化成正比,与货币价值变化无关D. 与货币价值的变化成正比,与商品价值变化无关18、资本主义工资之所以掩盖了剥削关系,是因为它()A. 表现为劳动的价格B. 是劳动力的价值C. 是劳动力的价格D. 是必要劳动的报酬19、社会主义国家执政党制定和执行正确路线和政策的理论基础和根本依据是正确认识本国()A、阶级和阶级斗争状况B、经济发展水平C、社会主义发展所处的历史阶段D、人民群众的觉悟程度20、联系是指一切事物和现象()A、都有的共同点B、都是统一物质世界的一部分C、都处于相互影响、相互制约和相互作用中D、没有确定的界限21、马克思主义哲学认为物质的唯一特性是()A、运动的绝对性B、发展的规律性C、客观实在性D、本质的可知性22、国体和政体之间是()A、本质和现象的关系B、绝对和相对的关系C、共性和个性的关系D、内容和形式的关系23、“我们周围是一个人化了的世界”,这个命题的意思是()A、我们生存的环境是实践改造过的世界B、意识是人化世界的决定性因素C、人的主观能动性不受客观条件的限制,可以创造出任何东西D、社会与自然界完全没有联系24、唯物辩证法所理解的发展是()A、事物的永恒运动B、新事物的不断产生,旧事物的不断灭亡C、事物由不完善向比较完善的转化D、物质世界的一般变化25、“凡是对客观事物的反映都是真理”,这是()A、彻底的唯心主义认识论观点B、唯物主义给真理下的定义C、混淆真理和谬误界限的错误观点D、承认真理相对性的辩证观点二、多项选择题(每题2分,共22分,请把答案写在答题表中)1、下列哪些说法反映了意识的能动性()A、不可以无根据地胡思甜想B、审时度势C、量体裁衣D、巧妇难为无米之炊E、根据实际情况决定工作方针2、历史进步的必然性在于()A、生产力的发展永远不会停止B、文化不断进步和发展C、社会发展是一个辩证否定的过程D、它符合人民群众的根本利益E、阶级斗争是一切社会发展的动力3、生产力与生产关系、经济基础与上层建筑的矛盾,之所以是社会基本矛盾,因为它们()A、决定着其它一切社会矛盾B、存在于一切社会形态之中C、贯穿于每一社会形态的始终D、是推动社会发展的基本动力E、决定社会发展的客观趋势4、“人的本质在其现实性上是一切社会关系的总和”是指()A、人的本质是人的社会性B、共同的人性C、以生产关系为基础的一切社会关系的总和D、人的本质也随着社会关系的变化而变化E、在阶级社会中人的本质表现为阶级性5、违背感性认识和理性认识的辩证统一原理,社会使我们在实际工作中犯()错误A、经验论B、经验主义C、唯理论D、诡辩论E、教条主义6、真理和谬误是()A、相比较而存在B、相斗争而发展C、在一定条件下互相转化D、无确定界限和严格区别E、主观对客观的反映7、人民群众是历史创造者观点的出发点有()A、社会存在决定社会意识的观点B、人民群众通晓社会发展规律的观点C、物质资料的生产方式是人类社会存在和发展的基础的观点D、人民群众占人口的绝大多数的观点E、人民群众具有先进的思想的观点8、文化在社会发展中的作用是()A、传递社会经验B、塑造人C、推动社会发展D、信息功能E、教化功能9、商品的使用价值、价值和交换价值的关系是()A. 使用价值是价值的物质承担者B. 有使用价值就一定有价值C. 价值是交换价值的基础和内容D. 价值是交换价值的表现形式E. 交换价值是价值的表现形式10、某地乡村公路边有很多柿子园。
南昌大学材料科学基础复习题与部分答案-2012

单项选择题:第 1 章 原子结构与键合1. 高分子材料中的 C-H 化学键属于。
(A )氢键 (B )离子键 ( C )共价键2. 属于物理键的是 。
( A )共价键 (B )范德华力 ( C )离子键3. 化学键中通过共用电子对形成的是。
( A )共价键 (B )离子键 ( C )金属键第 2章固体结构4. 以下不具有多晶型性的金属是。
(A )铜 (B )锰 (C )铁5. fcc 、bcc 、hcp 三种单晶材料中,形变时各向异性行为最显著的是 。
( A )fcc (B )bcc (C )hcp6. 与过渡金属最容易形成间隙化合物的元素是。
(A )氮 (B )碳 (C )硼7. 面心立方晶体的孪晶面是。
( A ){112} (B ){110} ( C ) {111} 8. 以下属于正常价化合物的是( 。
( A )Mg 2( B )5 C ) 3PbCu Sn Fe C第 3章晶体缺陷9. 在晶体中形成空位的同时又产生间隙原子,这样的缺陷称为 。
( A )肖特基缺陷 (B )弗仑克尔缺陷 (C )线缺陷10. 原子迁移到间隙中形成空位 -间隙对的点缺陷称为 。
( A )肖脱基缺陷 (B ) Frank 缺陷 (C )堆垛层错11. 刃型位错的滑移方向与位错线之间的几何关系是? (A )垂直 (B )平行 (C )交叉 12. 能进行攀移的位错必然是 。
( A )刃型位错 (B )螺型位错(C )混合位错13. 以下材料中既存在晶界、又存在相界的是 ( A )孪晶铜 (B )中碳钢 (C )亚共晶铝硅合金 14. 大角度晶界具有 ____________个自由度。
(A )3 (B )4 (C )5 第 4 章 固体中原子及分子的运动15. 菲克第一定律描述了稳态扩散的特征,即浓度不随 变化。
(A )距离 (B )时间 (C )温度 16. 在置换型固溶体中,原子扩散的方式一般为 。
( A )原子互换机制 ( B )间隙机制 (C )空位机制17. 固体中原子和分子迁移运动的各种机制中,得到实验充分验证的是( A )间隙机制(B )空位机制(C )交换机制18. 原子扩散的驱动力是。
《材料与社会》选修课考试答案整理PPT

矿石的综合利用:我国多复合矿,以包头、 矿石的综合利用:我国多复合矿,以包头、 攀枝花为例 乱采乱挖,不但回采率低, 乱采乱挖,不但回采率低,而且破坏了矿 区,以钨为例
2、传统材料的升级换代
传统材料量大面广,资源消耗多, 传统材料量大面广,资源消耗多,是重要污染 性能的提高与工艺的改进影响大, 源,性能的提高与工艺的改进影响大,传统材料升 级的潜力很大,如超级钢 级的潜力很大,如超级钢(973),通过晶粒细化或纳 , 米颗粒强化,可使钢的强度大幅度提高, 米颗粒强化,可使钢的强度大幅度提高,如: Š碳钢200→400MPa 碳钢200→ → Š低合金钢400 →800MPa 低合金钢 Š合金结构钢800 →1500MPa 合金结构钢 现已在大钢厂生产数百万吨, 现已在大钢厂生产数百万吨,并用于汽车制造 和建筑业。建筑业推广要改规范。 和建筑业。建筑业推广要改规范。
中国的原镁产量及出口量
碳系材料:自然间是碳循环; 碳系材料:自然间是碳循环; 资源丰富 同素异型: 同素异型:从柔软垫圈到 最硬金刚石 碳纤维:耐高温 碳纤维:耐高温2500ºC,高强、高模量 ,高强、 C60、纳米碳管,比强度 纳米碳管,比强度100倍于高强钢 倍于高强钢 工程陶瓷(Si SiC·······),性能优越, 工程陶瓷(Si3N4、SiC·······),性能优越,资源丰富 性脆, 性脆,价高 合成有机高分子材料:原料可再生、分子设计、 合成有机高分子材料:原料可再生、分子设计、正在向功 能材料发展 天然无机非金属材料:玄武岩、 天然无机非金属材料:玄武岩、蒙脱土等
除芯片材料外,还有更多的功能材料是 世纪 除芯片材料外,还有更多的功能材料是21世纪 研发重点,以适应知识经济社会的需求。 研发重点,以适应知识经济社会的需求。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
(对) 8. 纯 铝 具 有 较 高 的 强 度 和 塑 性 , 宜 用 于 制 造 承 受 较 重 载 荷 的 零 件 。( 错 ) 9. 铝 在 大 气 中 有 良 好 的 抗 腐 蚀 性 是 由 于 铝 不 易 与 氧 结 合 的 缘 故 。( 错 ) 10. 青 铜 系 指 除 锌 为 主 加 元 素 以 外 的 铜 合 金 。( 对 ) 11. 与 纯 铜 、 黄 铜 相 比 , 锡 青 铜 在 大 气 、 淡 水 、 海 水 等 介 质 中 具 有 更 好 的 抗 蚀 性 。( 对 ) 12. 铍 青 铜 是 目 前 强 度 最 高 的 铜 合 金 。( 对 ) 13. 生 锈 是 腐 蚀 的 副 产 物 。( 对 ) 14. 青 铜 最 早 出 现 在 中 国 。( 错 ) 15. 青 铜 最 早 出 现 在 希 腊 。( 错 ) 16. 铁 、 铬 、 锰 属 于 黑 色 金 属 。( 对 ) 17. 青 铜 最 早 出 现 在 西 亚 两 河 流 域 。( 对 ) 三.填空题 1. 含 碳 量 小 于 2.11%的 铁 碳 合 金 称 为 ____。( 钢 ) 2. 地壳中居各金属元素含量之首的是(铝) 3. 导电性第二的金属是(铜) 4. 导电性最好的金属是(银)
B. 化学成分中的微量元素
C. 内部结构缺隙
D. 光的物理作用
[参考答案] 化学成分中的微量元素
12. 世界最著名的祖母绿产地是
A. 哥伦比亚
B. 南非
C. 巴西
D. 伊朗
[参考答案] 哥伦比亚
13. 无机非金属材料大多属于
A. 绝缘体
B. 半导体
C. 导体
D. 不确定
[参考答案] 绝缘体
二.判断题
答案:不可再生性
3.电 视 机 机 壳 通 常 用 _____制 造 。
A. 喷塑薄钢板
B. 有机玻璃
C. 玻璃纤维复合材料
D. 玻璃纤维
答案:玻璃纤维复合材料
4.工 程 材 料 一 般 可 分 为 (
)等四大类。
A. 金属、陶瓷、塑料、复合材料
B. 金属、陶瓷、塑料、非金属材料
C. 钢、陶瓷、塑料、复合材料
、
和
三大类。
答案:塑料、合成纤维和橡胶
2.金 属 材 料 包 括 两 大 类 :
和
。
答 案 : 钢 铁 材 料 和 非 铁 (有 色 )金 属 材 料
3. 古人按色泽把金属分为
、
、
、
、
,统
称 “ 五 金 ”。 后 来 又 改 称
、
、
、
、
为 “ 五 金 ”。
答 案 : 黄 金 (金 )、 白 金 (银 )、 赤 金 (铜 )、 黑 金 (铁 )、 青 金 (铅 ),
A. 对资源和能源的消耗少,对环境无污染
B. 对资源和能源的消耗少,对环境污染少
C. 对资源和能源的消耗多,对环境污染少
D. 对资源和能源的消耗少,对环境污染多
答案:对资源和能源的消耗少,对环境污染少
二.填空题
1. 有 机 高 分 子 材 料 又 称 高 分 子 聚 合 物 , 按 用 途 可 分
为
试题
第一章
一.选择题
1.材 料 的 四 要 素 下 列 哪 一 个 不 对 ?
A. 性质和现象
B. 使用性能
C. 宏观性能
D. 合成和加工
答案:宏观性能
2.所 谓 材 料 必 须 具 备 如 下 几 个 要 点 , 其 中 错 误 的 是
A. 一定的组成和配比
B. 成型加工和形状保持性
C. 经济性
D. 不可再生性
而 变 化 的 复 合 材 料 。( 对 )
14. 历 史 上 人 类 首 先 发 明 了 陶 瓷 材 料 的 应 用 ,然 后 发 明 了 金 属 材 料 的 应 用 ,最 后 才 发 明 了
高 分 子 材 料 的 合 成 和 应 用 。( 对 )
15. 一 般 情 况 下 , 材 料 强 度 愈 高 , 其 硬 度 也 愈 高 。( 对 )ຫໍສະໝຸດ A. 蠕变B. 内耗
C. 滞后
D. 老化
[参考答案] 老化
二.判断题
1. 塑料就是合成树脂,凡是在室温下处于玻璃态的高聚物就称为塑料。(错)
2. 大多数高聚物的硬度比金属低,但其摩擦、磨损性能都远优于金属,这与它们的摩
擦系数低和自润滑性有关。(对)
3. 绝大多数高聚物不具有导电能力是由于其内部没有自由电子的缘故。(对)
16. 合 理 选 用 工 程 材 料 的 原 则 是 : 良 好 的 使 用 性 能 和 工 艺 性 能 以 及 合 理 的 经 济 性 。( 对 )
17. 中 国 古 代 建 筑 中 的 “ 三 合 土 ” 是 指 石 灰 、 黄 土 和 细 砂 。( 对 )
18. 高 分 子 材 料 具 有 较 高 的 强 度 、良 好 的 塑 性 ,较 强 的 耐 腐 蚀 性 能 ,很 好 的 绝 缘 性 ,以 及
D. 金属、陶瓷、高分子材料、复合材料
答案:金属、陶瓷、高分子材料、复合材料
5.我 国 在 东 汉 制 造 了 (
),它是中国文化的象征,极大地促进了世界文明。
A. 陶瓷
B. 瓷器
C. 青铜器
D. 丝绸
答案: 瓷器
6.环 境 材 料 同 时 具 有 满 意 的 使 用 性 能 和 环 境 协 调 性 能 , 环 境 的 协 调 性 指 的 是 :
C. 造成裂纹 D. 保温性 [参考答案] 保温性 4. 玛瑙是 A. 天然宝石 B. 天然玉石 C. 单晶 D. 均质体 [参考答案] 天然玉石 5.玛 瑙 的 主 要 成 份 A. CO2 B. SiO2 C. Al2O3 D. C [参考答案] SiO2 6. 钻石颜色分级主要采用什么法对钻石颜色进行划分? A. 肉眼观察 B. 仪器测定 C. 比色 D. 估算 [参考答案] 比色 7. 水晶的化学成分是 A. Al2O3 B. MgO C. SiO2 D. MgCO3 [参考答案] SiO2 8.价 值 最 高 的 蓝 宝 石 的 颜 色 是 A. 克什米尔蓝(矢车菊蓝色) B. 蓝黑色 C. 天蓝色 D. 淡蓝色 [参考答案] 克什米尔蓝(矢车菊蓝色) 9. 玻璃与水晶的快速区分方法是 A. 折射仪 B. 荧光灯 C. 二色镜 D. 偏光镜 [参考答案] 偏光镜 10. 翡翠的主要产地是 A. 云南 B. 越南 C. 缅甸 D. 泰国 [参考答案] 缅甸 11.蓝 宝 石 主 要 是 由 ____引 起 的 颜 色 。 A. 化学成分中的主要元素
现 、 用 石 头 和 砖 瓦 作 建 筑 材 料 。( 对 )
3. 陶 是 人 类 第 一 个 人 工 制 成 的 合 成 材 料 。( 对 )
4. 陶 瓷 是 人 类 第 一 个 人 工 制 成 的 合 成 材 料 。( 错 )
5. 铜 是 人 类 获 得 的 第 二 种 人 造 材 料 ( 对 )
金、银、铜、铁、锡
4. 我 国 古 代 冶 炼 和 使 用 的 金 属 ,已 证 实 的 有 、 、 、 、 、 、
八
种。
答案:铜、金、铅、锡、铁、银、汞、锌
5. 第三次技术革命始于 20 世纪中期,以____的应用为主要标志。
答案:原子能
6.___年 , 一 位 英 国 商 人 发 明 了 马 口 铁 容 器 , 开 创 了 金 属 包 装 的 新 历 史
10. 陶瓷材料有很高的硬度和耐磨性,故适合于制造齿轮(错)
三.填空题
1.传 统 陶 瓷 的 基 本 原 料 是
、
和 ____。( 粘 土 、 石 英 、长 石 )
2. ___素有“建筑工业的粮食”之称。(水泥)
第四章
一.选择题 1.下 列 不 是 天 然 高 分 子 材 料 的 是 A. 塑料 B. 木材 C. 皮革 D. 橡胶 [参考答案] 塑料 2. 聚氯乙烯可用于制造 A. 热电偶套管 B. 食品包装袋 C. 轮胎 D. 化工排污管道 [参考答案] 化工排污管道 3. 高聚物在长期储存和使用过程中,出现发粘、发软或失去弹性、变硬、变脆等现象, 称为高聚物的
10. 将 材 料 的 发 展 历 史 划 分 为 五 代 的 话 , 那 么 第 一 代 材 料 主 要 是 石 器 时 代 的 木 片 、 石 器 、
骨器等天然材料(对)
11. 将 材 料 的 发 展 历 史 划 分 为 五 代 的 话 ,那 么 第 二 代 材 料 主 要 是 陶 、青 铜 和 铁 等 从 矿 物 中
重 量 轻 等 优 良 性 能 , 在 工 程 上 是 发 展 最 快 的 一 类 新 型 结 构 材 料 。( 对 )
19. 材 料 的 性 能 与 材 料 的 成 分 密 切 相 关 , 而 与 其 结 构 无 关 ( 错 )
20. 材 料 是 人 类 用 来 制 造 产 品 的 物 质 , 但 在 人 类 产 生 前 业 已 存 在 。( 错 )
提炼出来的材料(对)
12. 将 材 料 的 发 展 历 史 划 分 为 五 代 的 话 , 那 么 第 三 代 材 料 主 要 是 高 分 子 材 料 。( 对 )
13. 将 材 料 的 发 展 历 史 划 分 为 五 代 的 话 ,那 么 第 五 代 材 料 主 要 是 材 料 的 特 征 随 环 境 和 时 间
工性也差。(错)
答 案 : 1814
三.判断题
1. 材 料 发 展 史 上 的 第 一 次 重 大 突 破 , 是 人 类 学 会 用 粘 土 烧 结 制 成 容 器 。( 对 )