YUY-08 模具陈列柜
EAS-MCC换模台车
+
+ 全自动 + 快速换模，±1min内 + 比2工位换模台更有成本 优势 + 可以解放车间行车 + 预热台 - 空间
- 一次只能服务一台注塑机
Copyright © 2015 EASChangesystems all rights reserved.
轨道式换模台: 优点/缺点 1 个工位, 单侧换模, 1台注塑机，双边
- 成本高， 如果只用于一 台注塑机
来自EAS的解决方案: 轨道式的换模台
1. 1工位, 1个方向换模, 1台注塑机， 单侧. 2. 1 工位, 1个方向换模, 1台注塑机， 双侧 3. 2 个工位, 1 个方向换模, 1台注塑机, 单侧. 4. 2 个工位, 2个方向换模， 2台注塑机, 单侧. 5. 长距离轨道, 1个货2个方向换模，服务多台注塑机，单侧。
开门
关门
> Mold moving out 模具移除
Copyright © 2015 EASChangesystems all rights reserved.
Free Moveable MCC: Operation principle
开门
关门
Click on Mold in > 移动换模车到正确的位置
`
模具 进入 模具 模具在换模台车内 移除
> Press “Mould in” Use crane
Unload mould A Load mould B
Copyright © 2015 EASChangesystems all rights reserved.
Mold Change Table on rails: 1 station, 1 side loading, 1 IMM, 1 side
格拉斯腾德冷冻展示器产品说明书
Glastender, Inc. · 5400 North Michigan Road · Saginaw, MI · 48604-9780800.748.0423 · 989.752.4275 · Fax 989.752.4444 · L ettuce c risper - Lcc ountertop M erchandiser- cM24W aLL -M ount r efrigerator - WMr24s-L, WMr24s-r,WMr24X-L, WMr24X-r© 2016 Glastender, Inc.Rev. 02-27-19A Family Company Manufacturing In The USA Since 1969M anufacture d ate & s eriaL n uMber i nforMationThis manual is specific to:• Lettuce Crispers: manufactured September 23, 2011 and after starting with SN 134133546Xand up to and including SN 134171318X , and PRIOR TO March 15, 2017.• Countertop Merchandisers: manufactured September 22, 2011 and after starting with SN 134136045 and up to and including SN 134171318X , and PRIOR TO March 15, 2017.• Wall-Mount Refrigerators: manufactured September 22, 2011 and after starting with SN 134133503 and up to and including SN 134171318X , and PRIOR TO March 15, 2017.CM24XX-RRWMR24S-RLC1Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • This manual describes the operation features of the Lettuce Crisper, Countertop Merchandiser, and Wall-Mount Refrigerator. Please review this information before attempting installation and operation. Long term, trouble-free operation will follow if good housekeeping and maintenance procedures are followed. Thank you for selecting Glastender, Inc. products..u tiLity r equireMents and c onnectionsElectrical: 115 V olt AC, 1 Phase, 60 Hz, 6.64 full load amps. A separate 15 amp circuit isrequired. A 10-foot grounded cord is included.Plumbing: Automatic condensate evaporator. No drain connection required.u ncrating and s tart -up i nstructionsAll models are shipped in one carton. These steps should be followed:1. If legs are included, bolt them to the base with bolts provided.2. For lettuce crisper and wall-mount refrigerator wall mounting instructions, see page3. 3. Position unit. It must be level and plumb.4. Plug into 115 volt AC outlet.5. Your Glastender equipment is now ready for use.i ntroductionIMPORTANT !! Attention Service Companies IMPORTANT !!Please review the important warranty information on page 10. If you believe a service call should be coveredby the factory, please call the factory for authorization between 8AM and 5PM EST, Monday through Friday.2Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • INSTRUCTIONS:NOTE: Mounting instruction applies to both the lettuce crisper andwall-mount refrigerator. Lettuce crisper shown in illustration.NOTE: 8″ of air space is required above unit to allow for air flow out. WARNING: Compressor failure due to restriction or blockage of air flow will void warranty.1. Mark a level line at the bottom of the lettuce crisper / wall-mount refrigerator.2. From this line measure up 24¾″ and mark another level line.3. On this line drill holes to match the holes in the wall mount bracket.4. Install wall mount bracket.5. Attach lettuce crisper / wall-mount refrigerator.6. If lettuce crisper / wall-mount refrigerator is not on an existing shelf, secure with bottom bracket.NOTE: At least two (2) of the mounting holes in the bracket should line up with studs in the wall for safe, secure mounting.ESTIMATED CLEANING TIME: 5 to 10 minutes per unit daily, 20 minutes weekly.FREQUENCY: Daily cleaning of exterior & door gaskets. Weekly cleaning of interior.PROCEDURE:1. A non-chlorine based cleaner or mild detergent and warm water applied with a soft cloth or sponge to all contact surfaces.2. Immediately rinse off cleaning agent(s), using clean warm water, clean soft cloth or sponge.3. Dry with a soft clean cloth, removing standing water as soon as possible.4. A more thorough cleaning of the interior should be done weekly (more frequently as necessary).5. The condensing unit air filter (front top left) should be removed and thoroughly rinsed in hot clean water at least once per quarter.NOTES:1. Never use hydrochloric acid, wire brushes, steel wool, scrapers, or chlorine based cleaners on stainless steel surfaces, since they willbreak down the passivity layer and allow corrosion to occur.2. On stainless steel surfaces, you may use a soft bristle brush or Scotch-Brite ® pad for more stubborn stains. Always scrub with thedirection of the grain. Follow with a thorough cleaning as described above.3. Deposits from food preparation must be properly removed. Even hard water deposits will rust stainless steel, if not removed.4. Door gaskets are most often overlooked when cleaning. Failure to clean them regularly will lead to premature failure, since alcoholand moisture build-up breaks down the gasket material.c Leaning i nstructionsC LBO TTOM BRACKET3Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • The lettuce crisper, countertop merchandiser, and wall-mount refrigerator are programmed to automatically defrost four times daily for approximately twenty minutes. During defrost, the fan inside the cooler will remain on and the refrigeration system will turn off. To initiate defrost manually, push and hold the DEFROST button for more than two seconds.The thermostat controller does not have an “OFF” function. To turn the unit off, the unit must be unplugged or power to the electrical branch circuithas to be turned off via a circuit breaker or switch.The operating temperature range is preset at the factory according to the table below and can be adjusted up or down within the limits shown.To see the set point - push and immediately release the SET button. The set point will be displayed.To return to normal visualization - Push and immediately release the SET button or wait five seconds.To change the set point - push and hold the SET button for more than two seconds. When the º F display begins flashing, push the up arrow or down arrow buttons to adjust the set point to the desired value.To save the new set point and return to the temperature display mode - push and release the SET button or wait ten seconds.Models LC, CM24, and WMR24 regarding the Dixell digital thermostat controllerThe thermostat control probe wire connector maybecome disconnected when the front cover is removed. This will result in thermostat P1 code. While the P1 code is flashing the compressor will cycle 5 minutes on and 5 minutes off and may cause icing of the evaporator coil. Service calls to reconnect the probewiring are not covered by factory warranty.connector4Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • The following electrical and refrigeration specifications apply:d esignr efrigerantp ressureM odeL e LectricaLt ypec harge h igh L oW R134a LC115V , 1 Ph., 60 Hz., 5.5 AMPR134a8.0 oz.23288Cond FanS t a r t R e l a yCSROverloadStart CapacitorWhiteC o m p r e s s o rWhiteGreenBlack12346789ControllerWhite BlueOrange Orange J BoxWhiteBlue 120/240VAC 50/60HZ12 VDCTransformerEvap FanBlueWhite Blue (-)(+)Power Supply 120VAC 60HZ 1PH Lights Per Unit VariesBrownLight SwitchOptional230VAC 50HZ 1PHLights for WMR / CM / UCR / FV5Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • 67*81213*04/27/2017 -7. 11000131 has been discontinued6Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • p art n o .d escriptionp ricee LectricaL c oMponents1217167Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • 8Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • 06009699p rices:All prices are LIST. Applicable taxes will be added.q uotations:Unless otherwise stated, quotations are effective for 30 days only.a cceptance:All orders are subject to acceptance by Glastender, Inc.’s headquarters in Saginaw, Michigan. Possession of the Product Directory and Price List is not an offer to sell.s hipMents:F.O.B. factory in Saginaw, Michigan. Freight terms are Third Party or Collect if shipped directly to you. Prepay and Add to Invoice freight terms are available upon request. The approximate shipping weights of all products are listed with the prices. Partial shipments will be made unless otherwise specified by the customer. Surface freight classifica-tions are:• GT-24/GT-30/GW24 Glasswashers - Class 175• GT-18 Glasswashers - Class 250• All Underbar Equipment - Class 175• Bar Die Orders – Class 250• Portable Bars - Class 175• Remote refrigerators (i.e., no compressor) or dry storage back bar equipment - Class 175• Self-contained refrigeration equipment - Class 150• Ice Display Units (IDU and GDU) - Class 85• Lighted Liquor Displays - Class 85• Beer line chillers and beer towers (beverage dispensing equipment) - Class 92.5• Bottle Disintegration System - Class 150• Ice Cream Freezers - Class 77.5All small items are evaluated to see the most cost effective means for shipment. Many small items ship via UPS or FedEx; however, when dimensional weight is excessive, LTL carriers are the most cost effective choice. Spare parts orders received before 1:00 PM EST can usually be shipped the same day.The order department is happy to assist with routing or shipping questions. p ayMent t erMs:Cash should be included with all orders unless credit terms have been arranged. To establish credit, banking and trade references are required.A convenient credit application is available upon request. Payment via credit card is not our normal means of receiving payment. Visa and MasterCard will be accepted, but must be charged at the time of ship-ment. In addition, a payment via credit card for orders totaling more than $500 will incur a 3% convenience fee on the total transaction amount.d eLivery:The majority of equipment is manufactured to order and typically ships within three to six weeks after complete order information is received by the factory. In-stock equipment typically ships within two to three days of the factory receiving complete order information.r eturns:Items specified as “Manufactured to Order” are NOT returnable.A Return Authorization number must be issued by the factory in advance for any items that are returnable. The number MUST be noted on the outside of the returned package. Returns must be received within 90 days of the issue date. Shipping charges must be prepaid. A mini-mum 20% restocking charge will be applied to all authorized returns if received in new, unused condition in the original packaging.The above conditions apply to spare part returns, except spare part returns must be received within 30 days of original shipment for elec-tronic or electrical parts or within 90 days for all other parts.L oss or d aMage:For customer routed shipments, Glastender, Inc. is not responsible for any loss, damage, or delay of merchandise during shipment. Such transit claims must be filed with the carrier. Merchandise must be examined on arrival. If shortages occur, Glastender, Inc. must be notified in writing within five (5) days of delivery to honor any shortage claim. Glastender will assume responsibility for freight claims on Prepay and Add ship-ments but the customer must inspect freight and note any damage upon receipt. Failure to do so may result in losses at the customer’s expense.c ustoM o rders:Custom orders must be paid in advance and are not subject to cancellation.L aMinates:Some products include common, readily available plastic laminates of the customer’s selection. There may be an additional charge if uncom-mon varieties are ordered.12/14/179Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • 10Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 989.752.4444 • Glastender, Inc. warrants all products to be free of defects in mate-rial and workmanship. One-year labor and parts warranty applies to all glasswashers, self-contained refrigeration models, and BDS model bottle disintegration units. In established areas, a start up is included with GT-24 and GT-30 model glasswashers. Warranty is effective for one year from the date of installation or up to 18 months from date of factory shipment, whichever occurs sooner. Glastender, Inc. will replace any part or assembly found defective under normal use and service.For warranty labor claims beyond 15 months from the date of factory shipment, proof of date of installation or occupancy must be provided. Authorization for labor must be obtained from Glastender within the warranty period and prior to the service being bor warranty applies to the United States and Canada only.Remote refrigeration models and beer line chillers include a one-year parts warranty only. There is no labor warranty on these products.Field replacement parts not covered under the original warranty include a 90-day part warranty from the date of installation.FOUR YEAR ADDITIONAL COMPRESSOR WARRANTY: Glastender will warrant to the original user the compressor for all self-contained refrigeration models for an additional four years following the regular one-year warranty period. This plan applies to the compressor only.A completed warranty claim form MUST accompany all returned defec-tive parts or assemblies. Upon request, a defective part or assembly must be returned to Glastender, Inc., Saginaw, Michigan, with all transporta-tion and delivery charges prepaid. Warranty repairs or replacements will be shipped FOB factory in Saginaw, Michigan. Reimbursement for applicable freight charges covers ground service only.Glastender provides in-warranty repairs during a service company’s regular working days and hours. There is no provision for payment of a premium rate during “overtime” hours. When warranty service is requested during other than normal working hours, the end user will be charged the premium portion of the overtime rate.The warranty covers substantiated travel expenses for up to 2 hours / 100 miles round trip up to a maximum of $150. Any additional costs due to installations that require extra work, time, or travel to gain access for service are the sole responsibility of the equipment purchaser. Any exceptions to these travel and access limitations must be pre-approved by a factory representative.The warranty does not cover door gaskets, chemical tubing, pump squeeze tubing, and/or any equipment subjected to accidents, freight damage, alterations from the original design, improper power and/or plumbing hookups, improper chemical use, general misuse, or lack of routine required maintenance as determined by Glastender, Inc. Installation, normal control adjustments, general maintenance, correct-ing an installation error, or service calls that reveal the unit is function-ing normally will not be reimbursed under warranty.Condenser coils on self-contained refrigeration products must be cleaned regularly. Failure to provide adequate air flow to a refrigeration unit will void the warranty.Glastender shall not be liable for loss of use, revenue, or profit, or for any other indirect, incidental, special, or consequential damage includ-ing, but not limited to, product spoilage or loss.This warranty is conditioned upon Glastender receiving notice of any defect subject to this warranty within sixty (60) days of its discovery by the end user or dealer. All products are warranted only for the initial place of installation. Removal of a product automatically terminates this warranty.SECOND YEAR EXTENDED PARTS & LA BO R WARRANTY:Glastender’s one-year parts and labor warranty on self-contained refrig-eration units, excluding beer line chillers, can be extended to two years with the purchase of a two year parts and labor warranty. Specify part number EWR2 ($150 net price) when ordering.EXPORT WARRANTY - One year parts only.EXCLUSION OF WARRANTIESEXCEPT AS PROVIDED A BO VE, GLASTENDER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.LIMITATION OF REMEDIES AND DAMAGES If Buyer makes a valid and timely claim as outlined above, Glastender’s liability and Buyer’s remedies under this agreement will be limited solely to labor charges authorized and/or replacement or credit, at Glastender’s option, with respect to Products returned at Buyer’s expense within thir-ty (30) days after warranty repair. GLASTENDER’S LIABILITY WILL IN NO EVENT BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE RETURNED PRODUCTS. GLASTENDER WILL NOT BE LIABLE UNDER ANY CIRCUMSTANCE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, LA BO R COSTS EXCEPT AS COVERED UNDER OUR WARRANTY , LOST PROFITS OR THE LOSS OF PERISHABLE PRODUCTS RESULTING FROM THE USE OF OR INABILITY TO USE OUR PRODUCTS OR FROM OUR PRODUCTS’ INCORPORATION INTO OR BECOMING A COMPONENT OF ANY OTHER PRODUCT. NEITHER PARTY WILL HA VE ANY NEGLIGENCE OR OTHER TORT LIABILITY TO THE OTHER, OR TO ANY THIRD PARTY , ARISING FROM ANY BREACH OF THIS AGREEMENT.GOVERNING LAW - JURISDICTIONThe terms and conditions of an order are to be governed and construed according to the laws of the State of Michigan, without regard to conflict of laws principles. Buyer hereby consents to the jurisdiction and venue of the courts located in Saginaw County, Michigan.No representative, distributor, dealer, or any other person is authorized to modify this warranty. This warranty replaces all other written or verbal warranties.NOTE: Glastender, Inc.’s policy of constant quality improvement means that prices, specifications, and policies are subject to change without notice. Questions regarding this warranty should be directed to Glastender’s Warranty Administrator.04-19-17APPLICABLE TO ALL PRODUCTS SOLD WITHIN THE UNITED STATES AND CANADA。
YUY-WJMNJ 透明五金冲压模拟机
YUY-WJMNJ 透明五金冲压模拟机
一、概述
透明五金冲压模拟机是对生产用机进行了微缩和改进，具有体种小、可随意移动，适用于课堂教学的微型实验台。
该产品以完成冲裁、拉伸、成型等动作。
具有结构简单，操作方便，且价格低廉的优点，无噪音无污染，并且可采用220V电压，可在任何有电场所使用。
填补了模具教学中无实验用机的空白。
本机可对透明拆装模具进行课堂上模拟演示，能在实验中看到模具的运动过程，提供设计人员对模具设计中的各机构产生更为实际的思维。
二、主要特点
1、机身及配套模具全部采用进口有机玻璃制作，该有机玻璃材料，耐腐蚀、抗磨
性能好，长久不变色演示效果逼真。
模具零件常用英文单词
富达金实业"Fudakin Insdustrial Co.,Ltd"模具常用术语中英文对照模芯Parting Core局部视图Partial View冷料# Cold Slag线切割Wire E.D.M轮廊Contour螺纹孔Tapping Hole连接件Fittings斜针Angle Pin接合Engage替换镶件Interchangeable Mold Inserts 指定吨位的注塑机Specific Press水嘴接头Water Fittings螺纹Eyebolt Thread回针Stop Pin二级顶出针Sub-Leaderd Pin镶件Mold Insert加硬Harden唧嘴Sprue设计筒图Design Preliminary名称块表Title Block版本标识Revision Level材料清单Stock List制模Build Mold手动滑块Hand Slide漏水测试Leak Test流道排气Runner Vents抛光Draw Polish侧抽芯Side Action加强筋Reinforcing三角撑Gusset柱子Bossed出模斜度Draft外廊Contour落单会议Kick-Off Meeting装卸孔Handling Hole运输安全带Moldstrap码模槽Clamp Slot撑头Support Pillar螺牙1/2-13 Eye Bolt 1/2-13Tap导柱位Leader Pin Location 耐落胶Teflon Paste偏移量Offset水塞Water Line Plug撬模脚Ppy Slot重新加工Reworked配件Components补偿Compensation平面度Parallel倒角Chamfer模胚Mold Base热嘴Hotnozzle火花机Edm熔接线Weildline压机Press晒纹Texturing梯形Trapezoid凸缘、法兰Flange方铁Spacer Block顶针板Ejector Plate顶针底板Ejector Retainer Plate垫板Retainer Plate后模镶针Core Pin拉圾钉Stop Pin有托顶针Shoulder Ejector Pin顶针板导套Guided Ejection Bushing针板导柱Guided Ejection Leader Pin 唧嘴Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing 水口板导套Runner Stripper Plate Bushing 定位圈（法兰）Locating Ring管钉（定位销）Dowel Pin管状管钉Tubular Dowel吊环Safety Hoist Ring日期印Dating Insert环保印Recycling Insert气顶Air Poppet Valve截水口镶件Runner Shut-Off Insert早回Early Ejector Return加速项Accelerated Ejector客户Client产品名Part Name产品编号Part No缩水Shrinkage版本Rev模胚Mold Base下模镶件Core Block上模镶件Cavity Block小镶件Sub-Insert下模小镶件Core Sub-Insert上模小镶件Cavity Sub-Insert行位Slide行位镶件Slide Insert压条Gib压紧块（铲机）Jaw硬片（摩擦片）Wear Plate水口铁Runner Bar上模水口铁Upper Runner Bar下模水口铁Lower Runner Bar弹簧Spring水口勾针Sprue Puller Pin顶针Ejector Pin撑头Support Pillar直身锁Side Lock斜度锁Interlock锁模板Safety Bar‘O’令（密封圈）O'Ring喉塞Plug隔水片Baffle波子螺丝（行位定位螺丝）Ball-Catch斜顶Lifter控制开关Switch回针Return Pin斜导柱Angle Pin推板Stripper PlateA’板A'PlateB’板B'Plate方铁（垫铁）Spacer Block顶针板Ejector Plate顶针底板Ejector Retainer Plate垫板Retainer Plate垃圾钉Stop Pin有托顶针Shoulder Ejector Pin 顶针板导套Guided Ejection Bushing针板导柱Guided Ejection Leader Pin 唧嘴Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing 水口板导套Runner Stripper Plate Bushing 定位圈（法兰）Locating Ring管钉（定位销）Dowel Pin管状管钉Tubular Dowel吊环Safety Hoist Ring日期印Dating Insert环保印Recycling Insert气顶Air Poppet Valve截水口镶件Runner Shut-Off Insert早回Early Ejector Return加速顶Accelerated Ejector扁顶Blade出模斜波Draft手动滑块模具Hand Slide-In Type Mold 回针板Backup合模Shutoff空隙槽Clearance Slot导柱及导套Leader Pin Bushing水口拉钩Spuer Puller模框镶件Pocket Insert成型热固性塑胶模具Thermoset Mold三板模3-Plat Mold分型面Parting Line司筒Ejector Sleeve垫圈Washer熔接线（夹水纹） Weldline吸针Sucker Pin回针板Retainer Plate顶出板Knock -Out Plate电动安全开关Electrical-Safety Switch 脱开Cut Of Position预先决定Preload缓冲器Bumper衬垫Cushion公差Tolerance突然性动作Slam销针Dowel钩槽Gib精磨Finished通框Through Window粘后模Sticking Core粘水口Sticking Sprue夹水纹Weld Line变形Warpage走水不平均Filling Uneven 走不齐Short Shot挂成品Part Hanging漏水Water Leakage刮花（擦伤）Galling漏电Ele Leakage困气Air Trapping温度Temperature注塑模Injection Mold入水Gate试板Sampling压力Pressure倒圆Fillet顶棍Ejector顶白Stress Mark粘前模Sticking Cav名称块表Title Block版本标识Revision Level材料清单Stock List斜导柱（斜边）Angle PinA板 A'plateB板 B'plate倒扣Under-Cut披峰Flash缩水Sink Mark氮化Nitride不规则四边形Trapezoid缩水Shrinkage连续的Consecutive雕刻Engrave出模角Draft分模面Parting Surface擦位Shut-Off(S/0)导套Bushing回针Return Pin加硬Harden唧嘴Sprue设计筒图Design Preliminary 丝印Silkprint不干胶Adhesive Sticker 导向针Guide Din公差Tolerance 线切割Wire-Cut电火花Edm抛光Polishing蚀纹Texture探热针Thermocouple三打螺丝毫（限螺丝）Stripper Bolt 盖板Cover Plate齿轮Gear油唧Hydraulic Cylinder司筒Ejector Sleeve导柱Leader Pin冷料# Cold Slag线切割Wire E.D.M.轮廓Contour螺纹孔Tapping Hole连接件Fittings斜针Angle Pin接合Engage替换镶件Interchangeable Mold Inserts 指定吨位的注塑机Specific Press水嘴接头Water Fittings螺纹Eyebolt Thread回针Stop Pin二级顶出针Sub-Leader Pin镶件Mold Insert锁定位Lock楔子(铲鸡) Wedge高产量模量High Volume Running Mold 剖面图Cross Section模具结构Mold Construction模芯Parting Core局部视图Partial View热流道Manifold热嘴Hot Nozzle型腔数Cav No模号Mold No胶料Material尺寸Dimension重要尺寸Critical Dimension雕刻Engrave托司 EJ.GUIDE PIN。
机械原理陈列柜_机械基础示教陈列柜_机械陈列柜大全_-上海中义
ZY型电脑控制、声控同步CD解说《机械原理》陈列柜第一代单价：68000元/套；第二代单价：84000元/套本《机械原理》陈列柜是根据大、中专院校、技校、职业学校的机械原理教学大纲而设计的一套电化教学设备。
《机械原理》课程是工科院校机械类、近机械类专业的一门重要技术基础课程。
陈列柜共分十个柜和一个DVD控制台，进行声控同步解说演示。
由单片机控制顺序或任选运行每个柜模型动作。
模型采用遥控任意选择进行单独演示，模型材料采用进口有机板和硬聚氯制作而成，板面面板采用高强度室外写真覆亚膜材料为底色，图表和文字说明直接制作在上面。
演示形象逼真，运行可靠，工艺美观，使用本陈列柜可提高教学效果，节约学时是一套现代化机械课程教学实用设备。
本套陈列柜有第一代和第二代两种形式。
一、主要特点：1、控制台配置：DVD机1台；控制硬件一套；攻放机1台，控制台1台、喇叭1对、遥控器1只，激光碟片1张（内含78个机构语音说明）2、控制软件：微电脑DVD程序控制系统，用DVD程控台实现全柜顺序播音动作和单柜顺序播音动作，实现声音、图像、模型三位一体同步动作，采用多种播放方案（如前进、后退、停止、步进、循环等）；也可实现任选和顺序动作。
3、控制方式：可实现全柜遥控和手动顺序播音、单个模型播音动作，或只动作不播音等功能。
4、控制动作过程：选中某号模型按遥控器上的数字键，按确认后，陈列柜上对应该号码的机构就开始动作运转，同时DVD机开始播放语音讲解此模型机构的特点及功能，讲解完毕后等待下一步动作。
二、《机械原理》陈列柜各柜内容如下：三、主要技术参数：1、输入电源：AC220V±10%（单相）50HZ2、工作环境：-10℃±40℃3、功率：0.5kw4、第一代陈列柜结构：上柜采用铝合金制作，下柜柜式结构。
5、第二代陈列柜结构：上下柜整体框架全部采用彩色铝塑钢制作，外形美观，坚固耐用。
6、陈列柜尺寸：1250×430×1780mm《机械基础》示教陈列柜第一代单价：71000元/套；第二代单价：87000元/套本设备是根据大中专院校、职业学校的教学大纲设计的机械陈列柜，《机械基础》电化教学设备。
模具明细清单
模块名称 （车身/内外饰/电 器/底盘/发动机）
厂商名称（代 码）
模/检/夹具名称
模/检/夹 具清单
备注
模/检/夹具名称命名规则：产品零件号-X(模/检/夹代码) 模/检/夹具编号命名规则：XXX(项目名称)-XXX(厂商代码)-X(模/检/夹代码)-XX(版本号)-XXX(流水号） 项目名称： 模具代码: M(Mold) 检具代码: G(Gauge) 夹具代码: F(Fixture) 版本号：与图纸上版本号一致 如需补充更多内容，请直接插入新一列
模/检/夹具编号
模检夹具属性 （冲压/注塑/压铸等）
模/检/夹数量
穴/模
版本号)-XXX(流水号）
模具寿命 金额（元） 资产归属 模具签收人
照片பைடு நூலகம்
机创赛获奖情况
作品名称 隐形多功能连体桌椅 便捷桌椅 幻梦机械制图投影仪 可调节变形课桌 轨道式一体桌椅 矫正坐姿折叠桌椅 琴键式梦幻长椅 防近视可折叠书架 数字光固化3D打印机 指南车 多功能制图桌 静力学平衡定理实验装置 曲柄滑块压力机工作原理演示实验台 自动擦写式创意黑板 全自动书写投影一体化白板 机械仿真激光烧结打印教具 示教立体停车场 万向自动黑板 汽车发动机液压加载及其动态参数测试装置设计 多功能四杆机构教具 传动式一体化黑板 现代课堂教学一体化课桌椅 移距型车刀角度精密测量台 钻铰连杆小头孔夹具 数控车床教学演示仪 滚齿加工示教机 多工位快速夹具 扫扫更方便——图书自动扫描取出机构 微型数控机床 免擦式滚动黑板 自动吸尘回收黑板擦套装 翻转式桌椅 新型可旋转课桌椅 基本传动零件的传动原理及传动特性教具 多功能课桌 集抗震与矫正坐姿于一身的新型多功能桌椅 一种新型便捷绘图桌 灵动课室 幻椅 多功能一体化桌椅 教学用四轴联动3D打印机 双轴微型电火花线切割教学机床 微型电火花教学机床 凸轮廓线原理演示仪 科氏加速度教学试验仪 智能教学辅助演示设备 桌面可适应性调节的人性化课桌 连杆运动分析教学设备 带有摄像及图像分享功能的水写布环保黑板 魔轨杆机构 新型环保磁性全视角黑板 机械王国的童话故事 教学用三轴联动数控铣床
广东石油化工学院
陈彪、胡晨、黄名钿、谭子东、陈蔚周
广州大学
李永敬，林祖明，温海涛，丘力，张航皓
广州番禺职业技术学院
官培武、颜祖聪、詹秋红、陈裕文、林春雨
华南理工大学
詹俊赋、池璋、莫振锋、曹睿
华南理工大学
李杰鸿、罗绍伟、吴武江、李忠浪
华南理工大学
古柳鹏、巩龙龙、陈灿、朱玉柱、满天荣
华南理工大学
黄忻晟、陈思锋、刘幸楠、何旭、黄宏东
YUY-15 机械零件陈列柜
YUY-15 机械零件陈列柜
一、概述
机械零件是现代各行业的基础，是物质生产的基本工具，其应用水平是一个国家技术水平和现代化程度的重要标志，也是信息化产业的基础。
设计则是产品生产的第一道工序，其成败很大程度上是在本阶段决定的。
在课程体系中的地位：专业基础课性质：是一门论述机械零件设计理论、研究机械零件设计方法的设计性技术基础课。
是多学科知识的综合运用。
具有综合性、设计性。
本公司专业生产机械系列陈列柜，为了配合教学需要，教具产品逐步走向现代化发展，在原有基础上，研制了一套机械零件示教陈列柜。
该套共分二十个柜400余种物零件模型。
柜体采用SPCC冷扎板焊成，坚固美观，表面采用中温磷化防锈漆、平光漆，静电喷涂。
模型材料采用进口有机板制造，板面附有必要的图表和文字说明，演示形象逼真，运行可靠，制作工艺美观，使用本陈列柜可提高教学效果，节约学时是一套现代化机械课程教学应用实验室设备。
陈列柜尺寸：1050×400×1800mm
机械制图示教陈列柜，各柜内容如下：。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
模具示教陈列柜内容： 序号名称 第一柜 机床专用模具 第二柜 简单冲压模具 第三柜 典型弯曲模 第四柜 冷挤压成型模具 陈列柜内容 前言、盖板式钻床夹具、活动 V 形架的应用、加工支架的车床夹具、固定式钻 床夹具。 简单冲裁模、导板式简单模、具有自动挡料装置的整装式复合模、倒装式复合模 带滑 U 形件弯曲模、 通用 V 形 弯曲模、 L 形件弯曲模 橡胶式压料装置、无压料装置的首次拉深模、落料拉深复合模、径向挤压 ( 冷 镦 ) 模具、杯形类冷挤压件、管类、轴类冷挤压件、杯杆类、双杯类冷挤压件、
YUY-08 模具示教陈列柜
本公司生产的模具陈列柜，力求实用根据学校教学要求需要、特制《冷冲压与塑料成型工艺及模具设计》 与《塑料成型模具》等教材设计而成的模具示教陈列柜，这套模具陈列柜共分十个柜和一台 CD 解说控制 台。模型材料采用工程塑料制作，板面附有必要文字说明，演示形象逼真，工艺美观，使用本陈列柜提高 教学效果，是一套现代化模具设计课程应用陈列室设备。 模具示教柜规格 :1200 × 400 × 1800mm
复杂形状冷挤压件 第五柜 自动冲制模具 第六柜 金属浇铸模具 第七柜 塑料压制成型模具 第八柜 注射成型模具 第九柜塑料挤出成型模具 第十柜 塑料中空吹塑模具 冲孔落料自动模、夹滚式送料自动连续模、滚柱夹持自动送料装置、棘轮传动的 转盘式送料装置。 两箱分模造型、浇注系统、带有浇冒口的铸件、芯盒造 芯和导向刮板造芯、立 式刮板造型、垂直分型式金属造型 典型压模结构、溢式压模、抽屉式压模、手动抽芯压模
分型面注射模具、双分型面注射模具、带横向分型抽芯注射模、热流道模具 管材挤出成型机头、棒材挤出成型机头、可视作宽扁孔的其它机头 ( 半圆环孔、 L 型、为端头无侧壁的方形环孔、六角环孔、圆形环孔 ) 挤出吹塑中空成型、注射吹塑中空成型、片材吹塑中空成型