开证申请书2
信用证开证申请书
信用证开证申请书尊敬的XX银行信用证开证部门：我方是一家位于中国XX省XX市的XX公司，现向贵行申请开立信用证，希望能够在我们与我方供应商之间的贸易交易中提供保障。
1. 开证原因我方有意与XX供应商进行一笔采购交易，交易金额为XX万美元。
为确保双方的权益，以及交易安全和顺利进行，故我们急需贵行开出信用证。
2. 交易详情本次交易是一笔XX产品的采购交易。
详细规格及数量如下：- 产品名称：XX- 规格：XX- 数量：XX- 单价：XX美元/单位3. 交付方式及地点我们希望交付方式为XX。
货物将会在供应商工厂出厂之后交付，并将会在我的公司地址进行目的地操作。
4. 贸易条款我们希望采用国际商会发布的《国际贸易术语解释通则》(Incoterms) 的CIF条款进行贸易。
具体条款如下：- 地点：目的地- 运输方式：XX- 封装：符合国际运输标准的适用包装- 负责包装的费用和风险，供应商负责包装的费用和风险，并进行适当的包装- 运输保险：由卖方支付商品的保险费用，并且可以向卖方索赔5. 付款条件我们希望采用即期付款方式进行支付。
具体方式如下：- 货物交付后立即通知付款- 付款金额将通过贵行向供应商开立的信用证进行支付6. 有效期及开证行确认我们希望信用证的有效期为XX天，并且期望贵行能够在XX 天内确认开证。
7. 其他条款为保证交易的顺利进行，我们希望信用证中包含以下条款：- 承兑行：XX银行或与贵行相对应的合作行- 运输文件要求：我们要求供应商提供以下文件以完成交易：- 提货单- 发票- 装箱单- 保险单8. 贵行服务优势我方选择贵行开立信用证是基于贵行信誉良好以及专业的信用证服务。
我们相信贵行能够提供高质量的服务，并且具备丰富的经验和专业知识来确保本次交易的顺利进行。
附件：供应商报价及合同在此，我方诚挚地请求贵行能够尽快开立信用证，以确保本次交易的顺利进行。
如有任何进一步的信息或文件需要提供，请随时与我方联系。
开证明申请书模板5篇
开证明申请书模板5篇(实用版)编制人：______审核人：______审批人：______编制单位：______编制时间：__年__月__日序言下载提示：该文档是本店铺精心编制而成的，希望大家下载后，能够帮助大家解决实际问题。
文档下载后可定制修改，请根据实际需要进行调整和使用，谢谢!并且，本店铺为大家提供各种类型的实用资料，如工作总结、工作报告、工作计划、心得体会、讲话致辞、教育教学、书信文档、述职报告、作文大全、其他资料等等，想了解不同资料格式和写法，敬请关注!Download tips: This document is carefully compiled by this editor.I hope that after you download it, it can help you solve practical problems. The document can be customized and modified after downloading, please adjust and use it according to actual needs, thank you!Moreover, our store provides various types of practical materials for everyone, such as work summaries, work reports, work plans, reflections, speeches, education and teaching, letter documents, job reports, essay summaries, and other materials. If you want to learn about different data formats and writing methods, please stay tuned!开证明申请书模板5篇我们需要在申请书中提供相关的背景信息，以便读者更好地了解我们的背景和动机，一份出色的申请书有着逻辑性和连贯性，以便能够让读者更好地理解我们的观点和要求，下面是本店铺为您分享的开证明申请书模板5篇，感谢您的参阅。
餐饮证申请书
餐饮证申请书
尊敬的餐饮管理部门：
我是XXX，现拟申请办理餐饮证，希望能够获得您的审批和支持。
我计划在XXX地区开设一家餐饮店，经过市场调研和分析，发
现该地区的餐饮市场需求旺盛，且竞争程度较低。
我有丰富的餐饮
管理经验和优秀的团队，相信能够为当地消费者提供高品质的餐饮
服务。
我已经准备了相关的营业场所、食品安全措施、员工培训等方
面的设施和措施，确保了餐饮经营的合法性和安全性。
同时，我也
会积极配合当地政府的相关监督检查，确保餐饮业的健康发展。
希望您能够审慎考虑我的申请，给予我办理餐饮证的机会。
我
将严格按照相关法规和规定，经营一家合法、规范、安全的餐饮店，为当地消费者提供优质的餐饮服务。
期待能够得到您的支持和帮助，谢谢！
此致。
敬礼。
XXX 敬上。
填制开证申请书（2篇）
填制开证申请书中国银行：我公司已办妥一切进口手续，现请贵行按我公司开证申请书内容开出不可撤销跟单信用证，为此我公司愿不可撤销地承担有关责任如下：一、我公司同意贵行依照国际商会第500号出版物《跟单信用证统一惯例》办理该信用证项下一切事宜，并同意承担由此产生的一切责任。
二、我公司保证按时向贵行支付该证项下的货款、手续费、利息及一切费用等（包括国外受益人拒绝承担的有关银行费用）所需的外汇和人民币资金。
三、我公司保证在贵行单到通知书中规定的期限之内通知贵行办理对外付款/承兑，否则贵行可认为我公司已接受单据，同意付款/承兑。
四、我公司保证在单证表面相符的条件下办理有关付款/承兑手续。
如因单证有不符之处而拒绝付款/承兑，我公司保证在贵行单到通知书中规定的日期之前将全套单据如数退还贵行并附书面拒付理由，由贵行按国际惯例确定能否对外拒付。
如贵行确定我公司所提拒付理由不成立，或虽然拒付理由成立，但我公司未能退回全套单据，或拒付单据退到贵行已超过单到通知书中规定的期限，贵行有权主动办理对外付款/承兑，并从我公司帐户中扣款。
五、该信用证及其项下业务往来函电及单据如因邮、电或其它方式传递过程中发生遗失、延误、错漏，贵行当不负责。
六、该信用证如需修改、由我公司向贵行提出书面申请，由贵行根据具体情况确定能否办理修改。
我公司确认所有修改当由信用证受益人接受时才能生效。
七、我公司在收到贵行开出的信用证、修改书副本后，保证及时与原申请书核对，如有不符之处，保证在接到副本之日起，两个工作日内通知贵行。
如未通知，当视为正确无误。
八、如因申请书字迹不清或词意含混而引起的一切后果由我公司负责。
开证申请人（签字盖章）13-4-4填制开证申请书（2）开证申请书尊敬的领事馆：我谨向贵馆申请办理签证，以便能够顺利进入您的国家，并履行我在那里的既定目标和计划。
在此，我将详细说明我的个人信息和旅行计划：个人信息：姓名：XXX国籍：XXX出生日期：XXX性别：XXX护照号码：XXX联系地址：XXX联系电话：XXX电子邮箱：XXX旅行计划：1. 基本行程：我计划于XX年XX月XX日从我所在的国家出发，前往您的国家。
开证明申请书格式模板
尊敬的XX单位：
您好！我是XXX，因个人原因需要贵单位为我出具一份证明。
特此向贵单位申请，
希望能够得到您的帮助。
一、申请事项
1. 我请求贵单位出具一份证明，证明我于XXXX年XX月XX日至XXXX年XX月XX
日在贵单位工作，职位为XX，工作内容为XX。
2. 我请求贵单位出具一份证明，证明我在贵单位工作期间，表现良好，认真负责，得到了领导和同事的认可。
3. 我请求贵单位出具一份证明，证明我在贵单位工作期间，遵守了贵单位的规章
制度，没有发生过任何违反职业道德和公司规定的行为。
二、申请原因
1. 我目前需要贵单位的证明，以用于办理离职手续。
2. 我计划将贵单位的证明作为个人工作经历的证明，以用于求职或其他目的。
三、申请材料
1. 我将提供我的个人身份证明文件，包括身份证、工作证等。
2. 我将提供我在贵单位工作期间的劳动合同、工资单、工作评价等证明文件。
四、申请时间
我希望贵单位能够在收到我的申请后，尽快出具证明文件。
如果可能的话，我希望能够在XXXX年XX月XX日前获得证明文件。
五、联系方式
如果贵单位需要进一步了解我的情况，或者有任何疑问，我随时愿意提供帮助。
我的联系方式如下：
电话：XXX-XXXXXXX
邮箱：****************
再次感谢贵单位对我申请的支持和帮助。
我期待着您的回复。
此致
敬礼
申请人：XXX
申请日期：XXXX年XX月XX日。
开证申请书中文样本
开证申请书中文样本尊敬的领事馆官员：我是某某公司的法定代表人，特此向贵馆申请办理开证手续，以便我公司能够顺利开展与外国企业的贸易往来。
我公司与外国企业有着长期的商业合作关系，为了进一步扩大合作规模，我们需要获得贵馆的支持和协助。
我公司是一家从事某某行业的专业公司，拥有多年的经验和良好的信誉。
我们一直以来都非常重视国际贸易合作，致力于提供高质量的产品和优质的服务。
如今，我们计划与外国企业建立更加紧密的合作关系，共同开拓市场，实现互利共赢。
为了能够顺利进行与外国企业的贸易往来，我公司急需获得贵馆的开证支持。
根据我公司的需求，我特此向贵馆申请开具以下证件：1. 商业签证：我公司需要派遣员工前往目标国家进行商务活动，与外国企业进行面谈、洽谈合作事宜。
商业签证将为我公司员工提供合法的入境和居留身份，确保他们能够顺利开展商务活动。
2. 出口证明：我公司计划向目标国家出口一批商品，为此需要贵馆出具出口证明。
出口证明是我公司商品出口的合法凭证，能够证明商品的质量和来源，为我公司在目标国家的销售提供必要的法律保障。
3. 贸易合作证明：我公司与外国企业进行商业合作，计划签订合作协议并进行贸易交易。
为了确保贸易合作的合法性和可行性，我公司需要贵馆出具贸易合作证明，以证明我公司与外国企业的合作关系和贸易意图。
我公司郑重声明，申请开证的目的完全符合法律法规和商业伦理，我们将遵守目标国家的法律法规，诚信经营，履行合同义务。
同时，我公司也将积极履行社会责任，推动可持续发展，促进经济繁荣。
为了能够顺利办理开证手续，我公司已经准备了以下材料：1. 公司营业执照副本及其翻译件：证明我公司的合法注册和经营资格。
2. 公司章程及其翻译件：详细说明我公司的组织结构和经营范围。
3. 经营许可证及其翻译件：证明我公司在目标国家从事相关业务的合法资格。
4. 合作协议及其翻译件：证明我公司与外国企业的合作意向和具体合作事项。
5. 公司财务报表：证明我公司的经营状况和财务实力。
开证明的申请书模板7篇
开证明的申请书模板7篇（经典版）编制人：__________________审核人：__________________审批人：__________________编制单位：__________________编制时间：____年____月____日序言下载提示：该文档是本店铺精心编制而成的，希望大家下载后，能够帮助大家解决实际问题。
文档下载后可定制修改，请根据实际需要进行调整和使用，谢谢!并且，本店铺为大家提供各种类型的经典范文，如总结报告、心得体会、演讲致辞、条据文书、应急预案、合同协议、规章制度、教学资料、作文大全、其他范文等等，想了解不同范文格式和写法，敬请关注!Download tips: This document is carefully compiled by this editor. I hope that after you download it, it can help you solve practical problems. The document can be customized and modified after downloading, please adjust and use it according to actual needs, thank you!Moreover, our store provides various types of classic sample essays, such as summary reports, insights, speeches, written documents, emergency plans, contract agreements, rules and regulations, teaching materials, complete essays, and other sample essays. If you would like to learn about different sample formats and writing methods, please pay attention!开证明的申请书模板7篇申请书可以是电子版或纸质版，具体要求取决于申请要求，申请书中的语言应当积极、自信，但避免夸大或虚假陈述，下面是本店铺为您分享的开证明的申请书模板7篇，感谢您的参阅。
个人证券开户申请书模板
unit to Allied Telesis.shown in the next figure. When installing the mounting bracket, ensure that its thumb screw is oriented in the same direction as the front of the access point chassis. Refer to the arrows in the following figure.6.Install and tighten two M4 screws (not provided) in the holes prepared in Step 5. The physical position of the bracket is now stationary.Quick Installation Guide TQ1402 and TQm1402Wireless Access Point613-002710 Rev C*613-002710 Rev C*CeilingWall123Attaching Chassis to Mounting Bracket1.Before mounting the access point to the mounting bracket, connect the Ethernetcables. If you choose to power the access point with a DC power supply, plug the DC connector into the DC IN jack.2.Installation of an anti-theft cable/lock is optional. If you choose to install a physicalsecurity device, the access point has a lock port that is compatible with a Kensington lock. Follow the instructions provided with the vendor’s anti-theft device packaging for the installation.NoteAnti-theft devices including a Kensington lock are not available or provided from Allied Telesis.3.Align and insert the two access point chassis screws into the keyhole slots of themounting bracket.4.Slide the chassis forward until seated into the bracket keyhole slot and the bracketthumbscrew is aligned with the screw hole on the front of the chassis,5.Tighten the bracket thumbscrew into the front of the chassis until it is securelyfastened.Starting the Initial Management SessionThis section contains an abbreviated version of the procedure for starting the initial management session. For complete instructions, refer to the TQ1402 Series Wireless Access Point Installation Guide or TQ1402 and TQm1402 User’s Guide.The wireless access point firmware includes a DHCP client. The default setting for the client is enabled. When you power on the access point for the first time, it queries the subnet on the LAN port for a DHCP server. If a DHCP server responds to its query, the unit uses the IP address the server assigns to it. If there is no DHCP server, the access point uses the default IP address 192.168.1.230.T o start the initial management session, perform the following procedure:1.Start the web browser on your management workstation.2.Enter the IP address of the wireless access point in the URL field of the webbrowser. The address is one of the following:❒If your network does not have a DHCP server, enter the default address 192.168.1.230.❒If your network has a DHCP server, enter the IP address the DHCP server assigned to the access point.The wireless access point displays the logon prompt.3.Enter “manager” for the username and “friend” for the password. The username andpassword are case-sensitive.Setting the Country SettingFor instructions on setting the country setting, refer to the TQ1402 Series Wireless Access Point Installation Guide or TQ1402 and TQm1402 User’s Guide.NoteThe non-US model of this product has a country code setting that must be set during the initial management session of the unit. The setting ensures that the unit operates in compliance with the laws and regulations of your country or region.The country code for the US model is preset and cannot be changed. Per FCC regulations, the country code setting for all Wi-Fi products marketed in the US must be fixed to US operational channels only.LEDsThe LEDs on the top panel of the access point are described in this table.Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one of the following measures:❒Reorient or relocate the receiving antenna.❒Increase the separation between the equipment and receiver.❒Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.❒Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate this equipment.This transmitter must not be co-located or operating in conjunction with any other antennaor transmitter. This device is restricted to indoor use only.The band from 5600-5650 MHz will be disabled by the software during the manufacturingand cannot be changed by the end user. This device meets all the other requirementsspecified in Part 15E, Section 15.407 of the FCC Rules.Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance of20 cm between the radiator and your body.European Union Restriction of the Use of Certain HazardousSubstances (RoHS) in Electrical and Electronic EquipmentThis Allied T elesis RoHS-compliant product conforms to the European Union Restriction ofthe Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic Equipment.Allied Telesis ensures RoHS conformance by requiring supplier Declarations of Conformity,monitoring incoming materials, and maintaining manufacturing process controls.Europe - EU Declaration of ConformityThis device complies with Directive 2014/53/EU issued by the Commission of theEuropean Community. For more information, refer to the TQ1402 Series Wireless AccessPoint Installation Guide.Note: Contact Allied Telesis for the EU conformity statement. To contact Allied Telesis, visitour web site at .Product SpecificationsFor the product specifications, refer to the TQ1402 Series Wireless Access PointInstallation Guide.Safety (&EMC) Requirements and Regulatory ComplianceFor safety (&EMC) requirements and regulatory compliance standards, refer to theTQ1402 Series Wireless Access Point Installation Guide.Copyright 2019 Allied T elesis, Inc.All rights reserved.No part of this publication may be reproduced without prior written permission from AlliedTelesis, Inc.Allied Telesis and the Allied T elesis logo are trademarks of Allied Telesis, Incorporated. Allother product names, company names, logos or other designations mentioned herein aretrademarks or registered trademarks of their respective owners.Allied Telesis, Inc. reserves the right to make changes in specifications and otherinformation contained in this document without prior written notice. The informationprovided herein is subject to change without notice. In no event shall Allied Telesis, Inc. beliable for any incidental, special, indirect, or consequential damages whatsoever, includingbut not limited to lost profits, arising out of or related to this manual or the informationcontained herein, even if Allied T elesis, Inc. has been advised of, known, or should haveknown, the possibility of such damages.TQ1402Table 1. TQ1402 Access Point LEDsLED State DescriptionPowerGREEN TQ1402 is powered ON and operating normally.AMBER System is booting up.OrA fault condition has been detected.BLINKING AMBER Firmware is upgrading.OFF TQ1402 is not receiving power.LANGREEN A valid link is established on the port.BLINKING GREEN Data is being transmitted and received.OFF No link is established.2.4GHzWi-FiGREEN The 2.4GHz Wi-Fi interface is enabled.OFF The 2.4GHz Wi-Fi interface is disabled.5 GHzWi-FiGREEN The 5GHz Wi-Fi interface is enabled.OFF The 5GHz Wi-Fi interface is disabled.456。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Please issue byTeletransmission□Brief teletransmission□Airmail an IRREVOCABLE CREDIT as follows:
Expiry date:28 February 2006
Photocopies in lieu of copy documents are acceptable.
Charter party/tanker bills of lading are acceptable.
Spelling and typographical errors excluding value, dates and quantity shall not be considered as discrepancies.
Full set 3/3 original clean on board Ocean Bills of Lading issued or endorsed to the order of LC applicant or LC Issuing Bank, and marked “Freight Payable As Per Charter Party ”;
Certificate of origin in1original(s) and2copy(ies) issued or countersigned by INDEPENDENT SURVEYOR at loadport.
Certificate of quality in1original(s) and2copy(ies) issued or countersigned by INDEPENDENT SURVEYOR at loadport..
Place for presentation:
Singapore
Applicant (name and address)
China Huaneng International Trade-Economics Co. Ltd
1709HuanengBuilding
A-23 Fuxing Road
Haidian District
3)Once copy (photocopy/fax/telex acceptable) of Bill of Lading indicating the issuing date and cargo quantity.
This page is an integral part of the application which consists of the first page, the second page and attachment(s), if any.
Unit price: CIF one safe berth/anchorage Huangpu, china price based on bill of lading quantity, shall be the average of whole month of the mean quotations published on Platt’S Asia Pacific/Arab Gulf Marketscan for “HSFO 180CST” under the heading of “Singapore” during November 01 - 30, 2005, plus a fixed premium of USD26.73 (twenty six point seven three) per metric ton. Any published correction to any of the relative quotation shall be taken into account. The unit price shall be calculated upto three decimal place.
Amount in figures:USD3,317,300.00
Amount in words:
United States Dollars Three Million Three Hundred and Seventeen Thousand Three Hundred Only.
Credit available with Nominated Bank:
Name or title of documents except bill of lading that are different from L/C wordings but serve the same purpose are acceptable.
In the event that the original shipping documents are unavailable at the time of presentation, payment will be made at maturity against the following documents:
by payment at sight
by deferred payment at:
by acceptance of drafts at:
by negotiation
Payable 60 days from Bill Of Lading date (B/L date to be count as day one).
1)Signed commercial invoice in two originals and one copy; and
2)Letter of indemnity in one original issued and manually signed by the authorized signatory(ies) of beneficiary and the wording and format of this document must be the same as follows:
Price Terms:CIF□CIP□FOB□CFR□others as per INCOTERMS
-All banking charges including relative reimbursement/payment charges, outside/insideissuing bank are for account of beneficiary.
100036, P.R. China
Beneficiary(name and address)
Huahai (Singapore) Pte Ltd
80 Raffles Place
#52-03UobPlaza1
Singapore048624
Advising Bank
Fortis Bank S.A./N.V.,Singapore
Third party documents except invoice, drafts and letter of indemnity are acceptable. Bills of lading showing third party as shipper are acceptable.
Documents presented later than 21 days after the shipment date but within the credit validity are acceptable.
allowed
not allowed
Transhipments
allowed
not allowed
Transferable
□transferable
not transferable
Confirmation of credit
□requested
□authorised if requested by beneficiary
不可撤销信用证申请书
授信编号：
招商银行分(支)行（部）
兹向贵行正式申请开立不可撤销跟单信用证，请贵行按本申请书正面英文部分对外开立。我公司特此承诺如下：
1.保证遵守及全面履行与贵行签订的《授信协议》/《国际贸易融资授信协议》中我公司应承担的一切责任和义务；
Full set of insurance policy /certificate blank endorsed for full CIF value plus 10pct with claims if any, payable inChinain the currency of this documentary credit covering.Institute Cargo Clauses AInstitute Bulk Oil ClausesInstitute War ClausesInstitute Strikes ClauseFrom warehouse to warehouse
Certificate of quantity in1original(s) and2copy(ies).
Special terms and conditions: