施工安全会议纪要

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

施工安全会议纪要

施工安全制度

1、加强对施工人员的安全教育和岗前培训工作。

2、严格贯彻安全操作规程,禁止违章作业。

3、安全生产小组定期招开安全生产会,对施工生产中存在的安全问题和隐患

及时纠正排除,做到警钟长鸣。

4、专职安全员要深入现场检查工作,发现问题及时纠正制止,防止安全事故

发生,当生产与安全发生矛盾时,要服从安全。 5、做好生活区和现场区的安全保卫工作,确保工作人员的人身安全和材料、设备不丢失。

6、做好安全防火、防暴工作,安全标志要齐全醒目,现场配置灭火器具,严

禁在易燃、易爆、危险品储存区或企业现场使用明火或吸烟。

7、机电设备必须专人保管,持证上岗,严禁酒后驾车和无证操作。

control-----main control at construction stage construction program reasonable, installation compliance with the standards and specifications. Especially hidden project quality control, strict inspection and acceptance and make records in a timely manner. To strengthen management of civilized construction work. (4) use-phase quality control-----'s ultimate aim is to meet the requirements of project quality control. To this end, the quality of engineering after the delivery, must be prepared to return, warranty system and technical services archives work, improve the quality of technical service. (5) to achieve the goal of quality control it is necessary to seriously implement the quality assurance manual ... Pass. 2. main control

position (1) procurement in operation is responsible for, a person shall not privately contact the supplier. IS09002 management procurement procedures according to company procedures. (2) duty personnel

certificate holders, strict induction training certificates, untrained staff induction control. (3) serious, carefully drawing prepared, drawings before construction technology to give the low-down,

technicians and construction workers should be reserved strictly embedded live, quality. (4) when installing the riser where you want to control the fixation and expansion joints, expansion joints according to the requirements, two fixed support should be given to a central location. (5) waterproof casing (especially underground pool of water pipe) take control of waterproof seam leakage, it tube embedded, packing enough

嫩右工地施工安全会议纪要

合同名称:嫩江右岸省界堤防工程扎泰联防段(扎K15+000~扎K20+200)堤防工

程施工合同编号:NYJ-SG-HT/YHDK-2008-3

会议名称:开工前施工安全会议时间:2008年6月14日参加单位及参加人员: 地点:工地会议室

沙学志、曲士聃、呼国志、李玉江、

黄喜权、宋建辉等全体施工人员。

会议主持人:王国军记录人:张树东

会议内容:

1.会议首先研究讨论当前本标段面临的安全形势,对目前的几个施工环节进行

安全

评价,提出了目前应当注意的几项风险因素。

2.在施工现场设置安全标志牌、警示牌、油罐上喷涂“禁止烟火”字样,并采取防

火措施,如不准在油罐附近吸烟等。

3.在填塘运输土方过程中,要求驾驶人员注意安全行车,避免发生交通事故。

4.在装车时注意挖掘机与自卸车的距离,防止发生碰撞事故。

5.住区注意安全用电和安全防火工作。

6.要求全体参加施工人员与当地村民保持和睦关系,杜绝打架斗殴等事件发生。

control-----main control at construction stage construction program reasonable, installation compliance with the standards and specifications. Especially hidden project quality control, strict inspection and acceptance and make records in a timely manner. To strengthen management of civilized construction work. (4) use-phase quality control-----'s ultimate aim is to meet the requirements of project quality control. To this end, the quality of engineering after the delivery, must be prepared to return, warranty system and technical services archives work, improve the quality of technical service. (5) to achieve the goal of quality control it is necessary to seriously implement the quality assurance manual ... Pass. 2. main control

position (1) procurement in operation is responsible for, a person shall not privately contact the supplier. IS09002 management procurement procedures according to company procedures. (2) duty personnel

certificate holders, strict induction training certificates, untrained

相关文档
最新文档