马自达3星骋六方位商品说明练习卡
AuraStar 說明書说明书
AuraStar說明書繁體中文Instruction manualEN This product is a stroller with Intelligent Auto-Brake device. Operation of the Intelligent Auto-Brake function is conditional. Please read this manual for details. ■Before use, please read this instruction carefully and use it correctly. ■Please keep this manual for future reference. ■Follow the instructions in this manual when assembling the required parts. ■Please also attach this manual if you transfer this product to others. 本產品是附帶自動刹車輔助裝置的嬰兒手推車。
自動刹車運作是有條件的。
詳情請閱讀本書。
■使用前，請仔細閱讀本說明書，並正確使用。
■請妥善保管本說明書，以供日後參考之用。
■需要安裝部件時，請詳閱本說明書後正確安裝。
■若將本產品轉讓他人，請將本說明書一併移交對方。
Please read this instruction manual carefully and keep it for future reference. The safety of the child may be seriously endangered if the instructions are not followed. You are personally responsible for the safety of your child.• The stroller is suitable for children from newborn 1 month to 15kg.(approximately 3 years old) under EN 1888-1:2018 safety standard and CNS 12940.• Always apply the parking brake when you are stationary.• Do not rely too much on the stopper even when the stroller is parked empty.• Even with all stopper engaged, always stay close to the stroller when it is carrying a child, in case of any danger.• Keep all small parts away from children as they are choking hazard.• To prevent the risk of suffocation, always keep the plastic bags out of the reach of children.• Overloading, incorrect folding and the use of non-approved accessories may damage this stroller.• Make sure to use the seat belt (crotch belt, waist belt and shoulder belt) when the child is seated. The front guard is not designed to prevent the child from standing up. Check if the seat belt fits properly, otherwise the baby may fall off from the stroller.• Pay attention to child even when seat belt is in use in case of any sudden movement of child causing it to fall off.• Do not cross the shoulder belts with each other when securing the shoulder belts to the insert plastic. Otherwise excessive pressure may be caused to child’s neck.• Do not use the seat cushion on which rift is found. Otherwise the seat cushion may not function as designed or the child may have chance to swallow the material inside the cushion.• Seat cushion can play a protective role. When the stroller is not installed with a seat cushion, please stop using the stroller. Otherwise, there may be risk of injury.• Do not leave the stroller when the child is seated.• Make sure the open-fold lock is engaged completely before use. Otherwise the stroller may fold suddenly in use.• Do not let the child operate the front guard. It may make the child to fall off from the stroller.• Do not allow your child to stand in or on the stroller, it may be dangerous.• Do not lean on or hang loads on the handle.• Do not hang parcels or accessory items (except Combi original accessories) on the stroller, otherwise tipping over may happen to stroller.• Never carry more than one child in the stroller. Do not allow a child to ride or sit on any area other than the seat.• Excessive weight may cause a hazardous and unstable condition exist.(Maximum load:15kg. Basket maximum load:5kg)• Do not use the stroller on stairs.• Do not let children operate the baby stroller to avoid tipping over or accident.• Be careful of those around you to avoid pinching their fingers when you are opening or folding the stroller or adjusting the seat angle.• Keep your child’s fingers/hands away from moving/folding parts when folding or unfolding or adjusting the stroller.• Do not apply a lifted seat to baby who cannot sit straight by itself, the most reclined seat must be used.• When pushing the stroller, please walk slowly to avoid any damage to the stroller swivel wheels or any tipping over.• Don’t let others touch when you open the stroller to avoid accidental injuries.• The used insert outlet from base seat and the cushion should be matched. (e.g. upperinsert outlet of base seat should match with upper insert outlet of cushion) . Otherwise, the shoulder belt may not be long enough to harness the baby.• It is extremely dangerous to adjust the seat angle when pushing the stroller. Stop thestroller first before operation.• Mind the road when move the stroller and prevent any wheel get stuck in the gap of the drainage ditch cover(s).• Never leave the child unattened. It may be dangerous to leave your child unattended.• Ensure that all the locking devices are engaged before use. Such as adjust yourseat belt length, fasten your seat belt correctly and the stroller is fully opened.• Always use the restraint system to avoid any possible accident.• Do not use in a reclined angle less than 150° for a child under 6 months old.• Any loading attached to the handle affects the stability of the stroller.• Please always fasten the five-point seat belt to ensure the baby's safety.• Check that the stroller body or seat unit attachment devices are correctly engaged before use.• This product is not suitable for running or skating.• Do not let the child play with this product.• To avoid injury ensure that your child is kept away when unfolding and foldingthis product.• Do not place the stroller near fire, high temperature, pool, or electric source.• Only replacement parts supplied or recommended by the manufacturer/distributorshall be used. Only use original accessories and parts that have been approved bythe manufacturer. Do not make any modifications to the product.• For low-power RF motors that have obtained the type approval, the company, store or user is not allowed to change its frequency, increase its power or change characteristics and functions of the original design without permission.• Usage of the low-power RF motors must not affect flight safety and interfere with legalcommunications; if any interference is found, stop using it immediately and improve toclear the interference before continuing to use it. The foregoing legal communication refers to the radio communication operated in accordance with the provisions of thetelecommunications laws. Low-power RF motors must tolerate the interference from legal communications or from industrial, scientific and medical motor equipment with radioradiation.• Excessive collision may cause failure in component.• Do not charge the Main battery in high temperature (such as in the sun).• To fold the main body, you need to fold the handle first, and then fold the stroller frame. • Charge the Main battery regularly. Otherwise the function may be failed and cannot be used normally (it is recommended to charge the Main battery at least once every month).• If the Main battery will not be used for a long time, turn off the power switch of it.• Do not disassemble the Main battery by yourself or pierce or cut it with a sharp object. Otherwise liquid leakage may be caused.• If leakage, smoking or burning occur to the Main battery, please keep it away from children, prevent children from touching and contact the after-sales service.• It is forbidden to throw the Main battery into fire or place it in a high temperatureenvironment. Otherwise an explosion may be caused.• Children are prohibited from playing with the Main battery to avoid accidents or damage.• During use, if the rear wheel, Main battery or front pedal is submerged in water completely, the circuit board may be damaged and the functions may be failed. Please stop usingfunctions of the Intelligent Auto-Brake and front pedal light, and contact after-sales service.• Make sure all snaps are secured when attach the seat cushion to stroller. Otherwise accident or damage to stroller may happen.• Loosen the shoulder belts and support the backrest with the other hand before lowering the seat angle with a child seated. Do not suddenly change the seat angle while a child is seated.• Adjust the length of seat belt properly after change of the backrest angle.• Please do not touch the folding lever except when folding the stroller.• When opening or folding up the stroller, be careful and avoid the seat cushion, seat belt, blanket and toys, etc., being pinched into the stroller body.• If one gives excessive shock to the front wheels when getting over the step, stroller may fall down and cause damages. When stepping over, such as a curb, please slow down even a slight difference level, pull downward the handle and step on the foot-step, and make sure to pass the front wheels to get over the step. When going over any step, be cautious of the bumping of the self-supporting rod against the step.• Never lift the stroller or use it on escalators or stairs when your child is sitting or lying in the stroller.• This stroller requires regular maintenance by the user.• Before use, check that the product and all its components have not been damaged during transportation.• Please do not use the stroller in whatever purposes other than seating a baby. Failure to comply may result in damage of the stroller.• Do not pull or twist or forcibly press down the front guard hardly. Otherwise the stroller may be damaged.• Lift the backrest a little to use if the seat is found too narrow when fully reclined. However, the baby should be able to sit straight when stroller is used in such way.• Do not let an adult sit on the stroller, or add loading on the stroller to avoid any damage to it.• When used in summer, outdoor weather and road conditions will increase the temperature of the stroller, that using for a long time should be avoided.• Avoid storing the stroller in places under high temperature, near a heat source or inside a car. Exposure to high temperature may damage or deform the stroller.• Check regularly that all screws, bolts and nuts are engaged tightly.• For use on trains:This product is not designed to be used on trains. When user attempts to use the product at his /her own risk, please lock stopper in case of sudden brake or turning. Otherwise stroller may fall off.• Do not press on the folding lever while lift the stroller to avoid damage to the part.• Make sure the basket is empty before folding up the stroller.• Make sure the canopy is completely folded up before folding the stroller to avoid damage of the parts.• Do not lay down the stroller and do not put things on the canopy to avoid deformation.• Do not get hold of an opened front guard to pull the baby stroller.• Even have stopper, this stroller may also be accidentally slip or overturned.• Do not leave baby stroller at road side or slope even when it is not in use.• Do not use the stroller on steep slopes, stairs, escalators, rough roads, beaches, mud, etc.• When pushing the stroller, please pay attention to any hole or track on the ground to avoid the front wheel from accidentally getting jammed and tipping over.• In the event of damage or operation problems, stop using the stroller immediately and keep it out of reach of children.• Never leave the stroller close to stairs or steps.• In the event of damage or operation problems, please contact customer service center (or local distributor).• Only use on a flat, relatively smooth, stable and non-slippery surface. Do not use the stroller in snowy, windy days or wet road to avoid the stroller or guardian from slipping.• Do not use the stroller in lightning days to avoid thunder stroke.• Do not attach other accessory like buggy board on the main body during a child being carried in stroller, otherwise accident or damage to stroller may happen.• Do not use the stroller on public vehicles.• Lift front wheels and pay particular attention to gaps or ditch when crossing rail road and the intersection of the motor road to avoid the front wheels from accidentally getting to jammed and tipping over.• No continuous use for a long period: Continuous use for a long period of time may exhaust baby. No continuous use of more than 2 hours for a baby in a reclined seat and 1 hour in an upright seat.• When feel jammed, please do not forcibly fold the stroller to prevent from any damage. You should reopen the stroller to check and operate again.• Do not put things that are too sharp or too large into the basket since it may cause damage to the basket.• Please regular cleaning and checking the stroller. Only use neutral detergent to clean the stroller body.• Make sure no oil or lubricant is left on parts such as front guard or armrest where baby may have chance to lick.• Please contact customer service center (or local distributor) for replacement if you find the tyre wear seriously affect movement.• Parking device shall be engaged when placing and removing the children.• Any load attached to the handle and/or on the back of the backrest and/or on the sides of stroller will affect the stability of the stroller.• Fasten the safety belt securely, but do not have it too tight.• Do not hold the front guard to lift the stroller while a child seated. Failure to comply may cause the stroller to fold up suddenly, release the front guard accidentally, or cause the stroller to slip off.CAUTION (Incorrect operation may cause injury or component damage)• When traveling on vehicles such as subways / high-speed rails, please mind that the wheels of your baby strollers are not caught by the door, and please mind the gap between the platform and the train.• When the child’s foot comes into contact with the floor or the wheel, stop using the stroller lest it be hurt.• Do not use in a lying angle if the child’s head is beyond the backrest.• After the Intelligent Auto-Brake is started, be sure to put your hand on the handle light strip. The stroller cannot be pushed normally until the light strip lights in blue.• The Intelligent Auto-Brake assist system is not applicable to all situations. Therefore, do not rely too much on it.• When the Intelligent Auto-Brake is off, use the manual brake.• If rechargeable batteries or a mix of used and new batteries are used in the handle dry cell compartment, the voltage may be insufficient. Using zinc-manganese batteries may cause dry cell leakage and thus damage the dry cell compartment.• No matter whether the Intelligent Auto-Brake function is activated or not, do not release your hands on a slope to prevent any danger.• When the handle light is lighting in red, stop using the electronic functions and check the status of the dry cell and the Main battery.• Follow the instructions of the airline when taking this product along on the aircraft.• This product generates 2.4GHz frequency band radio wave used by industrial, chemical and medical equipment such as microwave ovens. When there is a equipment using the same frequency band radio wave nearby, radio waves may not be received or transmitted normally.警告（錯誤操作可能引致重大傷害或死亡）不按照本使用說明書指引使用手推車，可能對幼兒造成重大傷害。
Mazda3 2.0L 六方位绕车话术参考
前排座椅颈部 保护作用
前排座椅设计兼顾舒适和安全，在前后碰 撞事故中，它能有效提供颈部的保护。
驾驶位置/姿势
您可以调整座椅。调整幅度很大，您可以 找到最舒适的驾驶位置。你也可以调整方 向盘的位置，保有最舒适的驾驶感觉。 手自一体的四档自动变速箱使您享有自动 档的便捷和手动档的乐趣。手动变速箱操 控方便，因为采用了短柄设计，而且换档 行程短。 仪表板的布局和设计使各种功能键显示清 晰、操控方便，还能激发驾驶激情，完全 为驾驶者考虑。 每个操控键的设计都为驾驶考虑。例如大 型的音响控制键和方向盘音响控制键。 车内设有大量的方便的储物空间，可以放 置私人物件。手套箱的容积有11升，在同 级车中是最大的。 新Mazda3具备芯片防盗系统，若有人要 强行启动发动机时它能防止发动机启动。
环保性能
车辆维护
不仅让您省心，节省了您的金钱，更节约 了您宝贵的时间。
4
理性销售话术
其他补充： 其他补充：
感性销售话术
5
感性销售话术
产品特性
车身工艺
车身尺寸
驾驶室
新Mazda3具备无匙进入功能，轻按遥控 按钮，就可以开闭门锁。当您手拿很多东 西而腾不出手的时候，你也不需要拿钥匙 开门，很方便。 车门外把手的设计便于车门开关，而且车 门开关时的声音和触感令人满意。这是新 Mazda3高质量的又一证明。 新Mazda3的车厢设计不仅很整洁舒适， 而且有种令人振奋的感觉，完全可以与更 大型和更豪华的车型相媲美。在这种环境 中体验驾驶的乐趣是莫大的享受。 圆形仪表具有独特的“黑色背景”设计。 当点火钥匙在OFF位置，只有指针亮起， 当在ON位置，你会看到所有数字呈现在 琥珀红的背景光中。 模块化设计的音响系统使中控台很整洁， 操控有很便捷。当外界噪音变化时，自动 音量调节功能免除了您调节音量的动作， 贴心周到。 因为有无匙进入系统，乘客再也不需要等 待驾驶员锁门或开门了，非常方便，尤其 是在下雨天或手上有很多东西的时候。 你什么时候才知道这是辆好车呢？当你每 次开关马自达的车门时，你就会找到这种 感觉。 请使用杂志报章上关于新Mazda3内饰设计 和空间的证明文章。
宇通客车产品手册说明书
S VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-TRAILERS FLA KS A-TRAILERS B-TRAILERS EXTENDABLES TRAYS SKELS DROP-DECK TLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-LERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDABLES TRAYS SKE DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOV I-TRAILERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDABLES TRAYDROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIM• UTES & VANS • PANTECHS • MINI BUSES • TRAYS & HIAB • PRIME MOVERS• SEMI TRAILERS• FLAT DECKS• A & B TRAILERS• EXTENDABLES• SKELS• DROP DECKS•TAUTLINERSUtes1T UteVans1T Van1.5T vanMini Buses (drivers available)s8 seater Mini Bus12 seater Mini Bus14 seater Mini Bus25 seater Mini BusLuggage TrailersPantechs3T Pantech with tail lift (auto or manual)6T Pantech with full tail lift6T Pantech with walk up board8T Pantech with tuck away tail lift8T Pantech with walk up board Tautliners6T Tautliner - 10 pallet with tail lift6T Tautliner - 10 pallet without tail lift8T Tautliner - 12 pallet with tuck away tail lift 8T Tautliner - 12 pallet without tail lift8T Tautliner - 14 pallet with full tail lift8T Tautliner - 14 pallet without tail lift12T Tautliner - 14 pallet with full tail lift 12T Tautliner - 14 pallet without tail lift Trays2T Tray with drop sides3T Tray with tail lift & gates6T Tray with or without gates8T Tray with or without gates12T Tray with container pins Prime MoversSingle rated with sleeperBDouble rated with sleeperBrand new Kenworths & Argosys available in automatic or manualHiab8T Tray with front mounted craneSemi TrailersFlat Decks40’ Flat Deck Tri Axle45’ Flat Deck Tri AxleExtendables19 mtr Flat Deck extendable18 mtr Drop Deck extendable21mtr Flat Extendable Tri AxleSkels40’ Skel with 3 way pins40’ Retractable Skel Tri axleOpen Drop Decks45’ Open Drop Deck with 3 way pins - With or without gatesTautliners45’ Flat Tautliner45’ Drop Deck Tautliner with mezz floor 45’ Drop Deck TautlinerA TrailersA Flat with container pinsA Drop Deck with mezzanine floorA+B SetsFlat open setsFlat Tautliner setsDrop deck Tautliner setsECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-TRAILERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDAB RAYS SKELS DROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-TRAILERS FLAT-DECKS A-TRAILERS B-T XTENDABLES TRAYS SKELS DROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-TRAILERS FLAT-DECKS A -TRAILERS B-TRAILERS EXTENDABLES TRAYS SKELS DROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEM RAILERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDABLES TRAYS SKELS DROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERSShort or long term hireSouthern Cross Truck Rentals offer shortor long term rentals. Our vehicles can be hired as needed – hourly, daily, weekly or monthly.24 Hour emergency service Southern Cross Truck Rentals provides24 hour roadside assistance. In caseof emergency, breakdown or accident involving your hire vehicle call 4633 6100.1800TRUCKHIRE mobile AppIf you’re in and out of the office, why not download our App from the App Store for a quick quote.One way rentalsSouthern Cross offers One Way rentals from Sydney to most capital cities.Call us or visit our website to see our One Way deals.Corporate cardOur CorporateCard offers asignificant discountto businesses whichhave a large fleetor contracted drivers. To find out more about our Corporate Card contact our Sales Department.Truck & Driver Hire Equipment GuideLet us do the driving for youSouthern Cross Truck & Bus Driver Hiresupplies both truck & bus drivers.Depending on your job, you can choose tohire Southern Cross Truck & Bus Driver Hiredrivers either at an hourly or project rate.Included in your price are all drivers’workers’ compensation and travelrequirements and, having a fleet of over140 vehicles at our disposal, we can easilysupply vehicles should you require.S VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-TRAILERS FLA KS A-TRAILERS B-TRAILERS EXTENDABLES TRAYS SKELS DROP-DECK TLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOVERS SEMI-LERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDABLES TRAYS SKE DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIME-MOV I-TRAILERS FLAT-DECKS A-TRAILERS B-TRAILERS EXTENDABLES TRAYDROP-DECKS TAUTLINERS UTES VANS PANTECHS TAUTLINERS PRIMFor more informationCall 02 4633 6100or visit .auSouthern Cross Truck Rentals149 Smeaton Grange Road, Smeaton Grange NSW 2567• Long & short term hire • Vehicle relocations • Vehicle delivery• Vehicle pick up • One way rentals • Corporate card• Driver hire (LR to MC)• Truck & driver hire。
马自达3维修手册车间手册(发动机)
id000000156700
转换为 SI 单位 （国际标准单位制） • 本手册所有数值计量单位均为 SI 单位。 传统计量单位数值均为从 SI 单位转换后数值。
四舍五入
• 转换后的数值被四舍五入到与原 SI 单位有效数位一致。 例如，如果 SI 单位数值为 17.2，转换后数值为 37.84，则 转换值经舍入后为 37.8。
调整 • 调整时应使用适当的测量仪和测试仪。
概述
橡胶零部件与管道 • 防止汽油或润滑油粘到橡胶零部件或管道上。
00
bf2eze00000133
管夹子
• 在重新安装的时候，把管夹子放在软管上原来的 位置上，用大钳子轻轻地挤压卡箍，从而确保正
确的装配。
bf2eze00000134
扭矩公式 • 在使用一把力矩扳手- SST 或等效工具组合的时 候，由于 SST 或等效工具组合增加了力矩扳手的
桥/
ATF
变速器油
变速驱动桥 / 变速器油
加油脂
适用的油脂
⊍㛖
ᆚᇕࠖ
P R SST
加密封剂
涂抹凡士林油
更换零部件 使用 SST 或 等效装置
适当的 密封剂
适当的 凡士林油
O 型密封圈、衬垫 等
适用的工具
提示性信息 • 在本手册中，您将会发现几处警告、警示、注意、规格以及上、下限值。
警告 • 警告表明在某种情形下，如果忽视该提示，可能导致严重的人身伤害或死亡。
装置的部件。 3. 维修规程的步骤均有编号，该步骤设计的主要部件另配有相应编号的插图。 有些说明还包含有针对某一规程的
重要提示或补充信息。 维修相关部分时应参考该说明。
ᑣ
Āᢚौᅝ㺙ā䚼ߚ Āᅝ㺙ৢẔᶹā䚼ߚ
马自达3星骋中控台说明书
马自达3星骋中控台说明书
马自达3 用户手册，我拍了一些注意事项和部分功能使用说明。
用户手册（正面）
用户手册（背面）
遥控钥匙电池型号
（AC冷风）空调系统最好每个月启动次10分钟左，以保持内部零件得到润滑。
原厂CD系统按钮及功能解读
功能解读
按钮及功能解读
按钮及功能解读
按钮及功能解读
功能解读
功能解读
如果显示 CHECK CD 说明CD机故障，需要去专修CD 机的店检查维修。
功能按键的使用说明（配合原厂CD才能使用）
功能方向盘按键说明
厂家规定的维护保养周期，这个只能做参考。
级别的机油是向下兼容的。
级别的机油是在环保方面出色省油的。
检查机油量标准做法。
（研究）
轮胎换位，保证四轮的均匀磨损。
新换的轮胎很有必要，每1万公里四轮换位。
发动机舱保险盒说明图
（洗节气门就需要匹配，用T版说的方法拔保险丝快捷又有效）
副驾驶保险盒说明图
副驾驶保险盒说明图
内饰清洁注意事项
车身车架号、发动机号位置说明。
这两个号码过户的时候需要用到。
1.6的是Z6发动机，
2.0的是LF发动机
发动机不同使用的火花塞也不同
变速箱油、转向助力油、刹车／离合器油的型号灯泡瓦数和型号，轮胎型号的含义。
Sovella 快发产品目录说明书
PRODUCTS SOVELLA BESTSELLERS READY TO SHIP IN 5 DAYS!Sovella Best-sellers, shipped FAST2Sovella - QuickShip Products 800-437-6772Wide variety of bench styles• Choose from 3 frame styles: 4-leg, light motor table, or C-leg manual • All frames are height adjustable and able to be equipped with casters • Standard light grey powder-coated ESD paintLarge selection of accessories • Accessories include: shelves, lighting, power, storage, drawers, and more!Ready to ship in just 5 days!•Products ship from Sovella warehouse in Canton, GA 30114TPLMTConcept60” x 30” (59.1” x 27.6”)Laminate 66025.6”-35.4”US-TP3060TPK 72” x 30” (70.9” x 27.6”)Laminate 66025.6”-35.4”US-TP3072TPK 48” x 30” (47.2” x 27.6”)ESD Laminate 66025.6”-35.4”US-TP3048TPKESD 60” x 30” (59.1” x 27.6”)ESD Laminate 66025.6”-35.4”US-TP3060TPKESD 72” x 30” (70.9” x 27.6”)ESD Laminate 66025.6”-35.4”US-TP3072TPKESD LMT48” x 30” (47.2” x 29.5”)Laminate 33025.39”-45.08”854667-4160” x 30” (59.1” x 29.5”)Laminate 33025.39”-45.08”854668-4172” x 30” (70.9” x 29.5”)Laminate 33025.39”-45.08”854669-4148” x 30” (47.2” x 29.5”)ESD Laminate 33025.39”-45.08”854667-4960” x 30” (59.1” x 29.5”)ESD Laminate 33025.39”-45.08”854668-4972” x 30” (70.9” x 29.5”)ESD Laminate 33025.39”-45.08”854669-49Concept Manual48” x 30” (47.2” x 29.1”)Laminate 110026.62”-44.34”US-10049560P 60” x 30” (59.1” x 29.1”)Laminate 110026.62”-44.34”US-10049562P 72” x 30” (70.9” x 29.1”)Laminate 110026.62”-44.34”US-10049564P 48” x 30” (47.2” x 29.1”)ESD Laminate 110026.62”-44.34”US-10049561P 60” x 30” (59.1” x 29.1”)ESD Laminate 110026.62”-44.34”US-10049563P 72” x 30” (70.9” x 29.1”)ESD Laminate110026.62”-44.34”US-10049565P• 1” low pressure laminate • Light grey surface •Plastic edging• 1” low pressure laminate • Light grey surface •Plastic edging• Light-grey, ESD laminate surface • Grey 180° rolled front edge • Thickness 1 3/16 inches• Grey laminate surface • Black molded “waterfall” edges •Thickness 1 3/16 inches3Sovella - QuickShip ProductsPreconfigured Workstations with Uprights72” x 30”Laminate Double Bay 14-CTP916-4160” x 30”ESD Laminate Double Bay 14-CTP915-4972” x 30”ESD Laminate Double Bay 14-CTP916-49Concept Manual60” x 30”Laminate Double Bay 14-C1004143472” x 30”Laminate Double Bay 14-C1004143560” x 30”ESD Laminate Double Bay 14-C1004943472” x 30”ESD LaminateDouble Bay14-C10049435*Double Bay upright modules not compatible with LMT workstations.60” x 30”Laminate Single Bay 14-CTP911-4172” x 30”Laminate Single Bay 14-CTP912-4148” x 30”ESD Laminate Single Bay 14-CTP910-4960” x 30”ESD Laminate Single Bay 14-CTP911-4972” x 30”ESD Laminate Single Bay 14-CTP912-49LMT48” x 30”Laminate Single Bay 14-C8544131660” x 30”Laminate Single Bay 14-C8544131772” x 30”Laminate Single Bay 14-C8544131848” x 30”ESD Laminate Single Bay 14-C8544931660” x 30”ESD Laminate Single Bay 14-C8544931772” x 30”ESD Laminate Single Bay 14-C85449318Concept Manual48” x 30”Laminate Single Bay 14-C1004139660” x 30”Laminate Single Bay 14-C1004139772” x 30”Laminate Single Bay 14-C1004139848” x 30”ESD Laminate Single Bay 14-C1004939660” x 30”ESD Laminate Single Bay 14-C1004939772” x 30”ESD LaminateSingle Bay14-C10049398Shown above: TP bench with double bay uprights Order No. 14-CTP915-41Shown above: TP bench with single bay uprights Order No.14-CTP911-414Sovella - QuickShip Products 800-437-6772Well-chosen accessories optimize workstation functionality and increase usability. When a workstation is well-organized and well-equipped, workflow becomes easier and more efficient, improving ergonomics and making it easier to keep tools in place.Below are some of Sovella’s in-stock and ready to ship accessories!Customize, personalize and reconfigure – it’s easy!Slotted uprights are the basic element for accessorizing Sovella tables. Accessories are attached to Sovella tables with the aid of slotted upright modules. The uprights are attached to the back of the table.121 x M60US-9074908P 1 x M72US-9074909P 2 x M30US-90349001P 2 x M36US-90449001Ph = module’s height attached from the worksurface*Double Bay upright modules not compatible with LMT workstations.1 x M60US-854924-491 x M72US-854928-49M6059.05”33US-91849006P M7270.86”33US-91849008P5Sovella - QuickShip ProductsM6057.75 x 11.81176US-854481-49M7269.80 x 11.81176US-854482-49M3634.25 x 11.81110US-852283-49M3635.23 x 3.54110US-859152-49M4847.04 x 3.54110US-859157-49M6058.89 x 3.54110US-859154-49M7270.66 x 3.54110US-859155-4936” Dual Intensity LED, balancer rail 33.46” x 1.26” x 1.81”14-9503515248” Dual Intensity LED, balancer rail 44.48” x 1.26” x 1.81”14-9503515324” Dual Intensity LED, magnetic 22.44” x 1.26” x 1.81” 14-9503515436” Dual Intensity LED, magnetic 33.46” x 1.26” x 1.81”14-9503515548” Dual Intensity LED, magnetic44.48” x 1.26” x 1.81”14-95035156ESD Footrest with massage rollerJT2ESDCaster Set Ø 3.93” nonESD (2 - locking, 2 - non-locking)834734-00M36 Bin rail w/6 outlet power 14-9114910M48 Bin rail w/6 outlet power 14-9114915M60 Bin rail w/6 outlet power 14-9114919M72 Bin rail w/6 outlet power14-91149237451011336Accessories6Sovella - QuickShip Products 800-437-6772Accessories,Bins4 stacking bins, blue(2) 1525-6 (9.84"x5.87"x5.12") (2) 1520-6 (7.56"x5.87"x4.13")SBS4-24 ESD Stacking bins, black (6.5” x 4.13” x 2.95”)SBS4-1015-4ESD 4 ESD stacking bins, black(2) 1525-4ESD (9.84"x5.87"x5.12") (2) 1520-4ESD (7.56"x5.87"x4.13")SBS4-2ESD*Order No includes 4 bins. Individual bins available with standard delivery time.152056*********56810126 Shelf bins, blue (11.81” x 5.20” x 3.94”)SBS6-3015-66 Shelf bins, blue (11.81” x 7.32” x 3.23”)SBS6-3020-66 ESD Shelf bins, black (11.81” x 3.62” x 3.23”)SBS6-3010-4ESD 6 ESD Shelf bins, black (11.81” x 5.20” x 3.94”)SBS6-3015-4ESD 6 ESD Shelf bins, black (11.81” x 7.32” x 3.23”)SBS6-3020-4ESD*Order No includes 6 bins. Individual bins available with standard delivery time.Stacking binsOur stacking bins have been designed for daily use in stores, production facilities and warehouses. These bins have been designed to fit all standard shelves, paternosters and industrial workstations. Bins of the same width stack securely, even if they are of different lengths. Straight sides ensure an efficient use of space.Shelf binsShelf bins are designed to fit all standard shelves, cabinets and industrial workstations.Bins of the same width stack securely, even if they are of different lengths. Straight sides ensure an efficient use of space, and the bins are available in several bright colors to facilitate product identification. Each drawercomes with a label and protective cover.Terms and ConditionsQuickShip only available for item numbers listed in this brochure. Shipping method must be specified at the time of order. QuickShip productsare ready to ship in five days. Sovella is not responsible for delayed pickups by freight company. Ship time may vary for large orders over 10 benches.Freight is FOB shipping point, Canton, GA. Freight will be pre-paid and added to the invoice or freight collect according to your written instructions. We will coordinate shipments with your representatives. If the job site is not ready to accept shipments at the time scheduled, wewill not be responsible for moving material in or out of storage or other job site locations and any costs incurred. ”FOB shipping point” indi-cates the buyer pays shipping cost to the end user, and takes responsibility for the goods when the goods leave the Sovella’s premises or the premises of the Sovella subcontractor when drop shipping direct from the Sovella subcontractor to the end user.All material is shipped knocked-down unless otherwise noted. Assembly and installation is not included.Receipt of goods must be inspected and inventoried. Any shortage must be reported in writing within 48 hours. Sovella’s freight terms areFOB Canton, GA. Any freight damage should be noted on the freight bill at the time of receipt. Claims should be reported to the freight com-pany directly as soon as possible. Sovella will assist in the claims process but cannot file the claims.Return policy; All returned goods require a RMA number (Return Merchandise Authorization) issued by Sovella, Inc. prior to the return of any goods. All Requests for return authorization must be within 60 days of original invoice. All returns should be packaged so that it is re-turned in re-sellable condition; returned freight prepaid. Upon receipt and inspection of product, Sovella, inc. will issue an 80% credit against applicable invoice if product is deemed re-sellable. Custom or non-standard products may not be returned.Authorization of partial shipments requires written approval from the distributor and acceptance by Sovella, Inc.Terms are NET 30 days from the date of invoice.Warranty: Steel construction and weldments, (5) five years from date of shipment. Mechanical cranks, fixtures and devices, (1) one yearfrom date of shipment. Electrical motors, fixtures, and devices, (1) one year from date of shipment. All in accordance with established Sovella warranty statements.All products are Sovella gray (RAL 7035) in color unless otherwise noted.All items noted with ESD properties are guaranteed to meet ESD requirements specified in the IEC-61340-5-1 standard.Connection, grounding, any local requirements and verification of same is the responsibility of the end user.Sovella will not accept any contract or agreement that contains any penalties or liquidated or actual damages.All orders are subject to credit approval by Sovella, Inc.Any order under our $100.00 minimum will be subject to a $25.00 handling fee. Spare parts excluded.PackagingSovella takes pride in protecting our shipments from damage. Shipments are carefully packed to ensure shipments are received damage-free. Upon shipping, ”DO NOT STACK” cones are placed on top of the boxes. A photograph of the shipment is placed on the outside ofthe package to display the state of the shipment as it is shipped. The photograph provides photo proof to the receiver as to the state of the shipment upon departure from origin.7Sovella - QuickShip ProductsLong story in shortCONTACT INFORMATIONTreston Deutschland GmbH Thomas-Mann-Str. 2122175 HamburgTel. +49 40 8816 5022 - 0Fax +49 40 8816 5022 - 10info.de@ www.treston.deTreston International Trading (Shanghai) Ltd15/F, Tower 2, Plaza 66No. 1266 West Nanjing Road Jing’an District, Shanghai 200040Tel. +86 21 6039 8572info@ (Chinese) (international)Treston Deutschland GmbH Niederlassung Raunheim Frankfurter Straße 10165479 RaunheimTel. +49 6142 992 50Fax +49 6142 218 75mail.de@ www.treston.deTreston Ltd Treston House5b Bone Lane, Newbury Berkshire, RG14 5SH Tel. +44 1635 521521Fax +44 1635 37452salesuk@ Industrimøbler AS Stålfjæra 10975 OsloTel. +47 22 25 05 00post@industrimobler.no www.industrimobler.noTreston Group Russia LLC197375, Russia, Saint-Petersburg,Marshala Novikova street 42Tel. +7 812 677 76 20info.ru@ Sovella, Inc.156 Bluffs Court Canton, GA 30114Tel. +1 770 721 7980+1 800 437 6772Fax +1 770 720 6584infousa@ Treston Ergonaul. E. Orzeszkowej 6 lok. 2A 05-825 Grodzisk Mazowiecki Tel. +48 604 11 98 64info@ergona.pl www.ergona.plTreston France SARLZ.A.C. de la Bonne Rencontre1, voie Gallo Romaine,Quincy-Voisins 77334 Meaux Cedex Tel. +33 1 64 17 11 11Fax +33 1 64 17 11 10infofr@ www.treston.frTreston ABTumstocksvägen 9 A 187 66 TäbyTel. +46 8 511 791 60Fax +46 8 511 797 60info.se@ www.treston.seSovella Human Workspace BV Mechelaarstraat 174903 RE Oosterhout Tel. +31 162 454 383Fax +31 162 434 712infoben@humanworkspace.nl www.humanworkspace.nlGERMANYRUSSIAFRANCESWEDENBENELUXCHINAUNITED KINGDOMNORWAYUSA HEADQUARTERSPOLANDTreston Oy, Turku plant Sorakatu 120730 TurkuTel. +358 10 4469 11Fax +358 10 4469 789sales@ www.treston.fiTreston Oy Sorakatu 120730 TurkuTel. +358 10 4469 11Fax +358 10 4469 789sales@ Treston Oy, Jyväskylä plant PO Box 33 (Sohlberginkatu 10)40351 JyväskyläTel. +358 10 4469 11Fax +358 10 4469 290sales@ www.treston.fiFACTORIESHEADQUARTERSPremium partnersC o p y r i g h t © 2016 S o v e l l a . A l l r i g h t s r e s e r v e d . S p e c i f i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t p r i o r n o t i c e .Thanks to our global sales network, you can receive local support and customer service anywhere in the world. We have offices in Europe and North America as well as an extensive network of selected dealers in more than 30 countries.Sovella has a long history in professional furniture design and manufacture, and well over four decades of experience in ergonomic workspace development. Our design and manufacturing facilities are located in Finland.。
旺角车型商品说明书
Headroom Front row................................................ 46.8 Second row............................................ 45.1 Third row................................................. 41.3
2014 ford transit connect wagon
Standard Equipment
Content includes: Exterior • Bodyside moldings – Gray, molded-in-color
• Front bumper – Gray, molded-in-color
XLT includes all XL content, plus:
Exterior • Bodyside moldings body-color, painted
• Front bumper body-color, painted
• Fog lamps
• Power adjust, heated exterior mirrors with manual fold – Black, molded-in-color
• 4-way adjustable steering column
• 6 -way manual driver seat with manual lumbar and rear map pocket
• 12V powerpoint in rear cargo area
Moza AirCross 3 用户手册说明书
1. Tilt Motor Lock2. Extension Port3. Quick Release Plate4. Tilt Adjustment Slider5. Pan Motor Lock6. Foldable Safety Lock7. Smart Trigger8. Quick Release Plate Knob9. Quick Release Baseplate Knob 10. Roll Knob 11. Roll Motor Lock 12. Pan Knob 13. USB-C Charging Port 14. Battery Indicator Light 15. Power Button 116. OLED Screen 17. Joystick 18. 1/4’’ Extension Port 19. Camera Control Port 20. AI Extension Port 21. Tilt Knob 22. Foldable Knob 23. Camera Control Button 24. Function ButtonUnfold the Gimbal 1. Screw the mini tripod into the screw hole at the bottom of the handle.1.Rotate the foldable Knob;2. Unfold the handle until it is locked.3. Tighten the knob to prevent the handle from loosening.Please charge the battery through the USB-C charging port using a USB-C cable Attaching the TripodBattery Charging2. Expand the mini tripodUnlock the GimbalMounting the Cameramay be damaged. If the gimbal is turned on before unlocking, the gimbal will enter sleep mode.Make sure to prepare the camera before mounting, confirm the battery is fully charged and a memory card with sufficient storage space is inserted.1. Place the camera on the quick release plate with 1/4”or 3/8”screws and keep2. Slide the quick release plate onto the baseplate to the locked position.release plate is locked.Rotate the motor lock to the unlocked position, and then each motor canBalance Adjustment1. Balancing the tilt axis vertical a. Rotate the camera so that the lens is pointing upward b. Unlock the tilt axis and loosen the knob, slightly adjust the position of the tilt adjustment slider.c. The balancing is completed when the camera is steady while pointing2. Balancing the tilt axis horizontal a. Rotate the camera so that the lens is pointing forward;b. Unlock the quick release plate, slightly adjust the position of the plate;c. The balancing is completed when the camera is steady while pointing forward,：Enter or exit sleep mode.Left Button: Return Right Button: Confirm3. Balancing the Roll Axis a. Unlock the Roll axis.b. Slightly adjust the roll arm left and right until it’s completely horizontal.c. Lock the roll axis.4. Balancing the Pan Axisa. Hold the gimbal at an angle of 45° horizontally, turn the pan arm to a horizontal angle.b. Unlock the Pan axis and slightly adjust the pan arm left and right.c. The Pan axis is balanced when the camera is steady, lock the pan axis.Please visit for the complete user manual. It will guide you:● Language Switch● Camera Control● Button Customization● Motor Output● FPV, Sport Gear Mode, Manual Positioning● User Configuration● Calibration and Firmware UpdatesScan the code or search in the app store to download the MOZA Master App.MOZA Master provides functions like Virtual Joystick Control, Motion Sensing Control, Parameter settings, Time-Lapse, Panorama, Calibration and Firmware Updates.MOZA Master AppModel: AirCross 3Weight: 1.3kg without tripodDimension: Unfold: 170*190*310mm, folded: 52*225*270mmBattery Type: Li-ion Intelligent Battery(built-in), 24.718WhBattery Capacity: 3400mAhStandard Votage: 7.27VCharging Votage: 5V/2A, 9V/2AWorking hours: 20HFast-charging time: 1.4HBluetooth: BT5.0，2.400 GHz -2.4835 GHzEnvironmental requirements: 1. This product is powered by a built-in battery; please do not disassemble it, do not put it into liquid or fire in order to avoid damage or risk of injury.2. Before powering on the gimbal, please adjust the balance follow theinstructions in this document. If the gimbal works in an unbalanced state for a long time, the surface temperature of the motor can get hot, which will seriously shorten the battery life.3. Do not let children touch and use this product, do not use fingers to obstruct the motor operation to avoid finger injury.4. This product is not waterproof or dustproof; please keep the gimbal clear of dust and water to avoid damage.(W*D*H)Working temperature: -10 ℃ -50 ℃;Charging temperature: 5 ℃-40 ℃11. 俯仰电机锁2. 外设扩展接口3. 快装板4. 俯仰调节滑块5. 航向电机锁6. 折叠安全锁扣7. 扳机键8. 快装板锁紧扳手9. 快装板底座缩紧扳手10. 横滚臂锁紧旋钮11. 横滚电机锁12. 航向臂锁紧旋钮13. USB-C充电接口14. 充电指示灯15. 电源键16. OLED显示屏17. 摇杆18. 1/4” 螺丝孔19. 相机控制接口20. AI拓展接口21. 俯仰臂锁紧旋钮22. 折叠锁紧旋钮23. 录制键24. 功能键展开云台1.将三脚架拧入手柄底部的螺丝孔中1.折叠锁紧旋钮；2.将手柄折回到竖直位置，直到折叠安全锁扣已经锁住手柄；3.锁紧折叠锁紧旋钮，防止手柄松动。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
五 车侧腰线 、 4大刹车盘278/265mm 车
5大尺寸轮胎
侧 方
五 、 车 侧
6前麦弗逊悬挂 7后多连杆独立悬挂 10塑钢防爆油箱 11ABS、EBD、BA 12DSC主动稳定系统 1全铝合金材质 2FAPAIS技术前进气 附防倾杆、副车架 附防倾杆、副车架 阻燃型材料，侧翻自动切断供油 防抱死、制动力分配、刹车辅助 方向机及车轮传感器、25次/秒 重量下降20%，降噪减震 降低进气温度、高速降低油耗 2400RPM低转速扭矩达90%输出 高低速进气管变化 进气产生涡流，冷机燃烧更稳定 燃烧后的废气循环进入汽缸 发动机运转精确平稳、油耗更低 日本爱信原装进口、换挡平顺 占用空间小，转向灵活，防止车辆侧倾 乘坐舒适性，良好操控性 核潜艇采用钢材强度，与奥迪.君越同等强度 提供安全保障 轻踩刹车即有强大制动力 防止转向不足和过度 提高燃油经济性 有效提高底盘高度空载170mm 低转速高扭矩 提高燃烧效率，降低油耗 低温启动时燃烧更充分，减少积碳 燃烧充分、降低油耗、欧四排放 供油更精确、运行更平稳 沃尔沃、雷克萨斯同品牌 降低后期维护成本
三 、 车 后 座
1ELR三点式安全带 2可伸缩式头枕 3儿童安全锁 4ISOFIX儿童座椅固定 5座椅4/6折叠放倒 1立体感 2尾翼 3LED尾灯 4一体式后保险杠 5后备箱 6隐藏式印刷式天线 7镀铬排气尾管设计 8倒车雷达 1外扩形轮拱 2SAP空气动力学套件 3后视镜LED带广角镜
四 、 车 后 方
方 9MAIDAS高刚性车体结构 高强度钢材、最高1480兆帕
六 、 发 动 机
3SVT可变气门正时 4VIS可变进气歧管 5TSCV涡流控制阀 6.EGR废气再循环 6ETC电子节气门 7.5MT/4MAT变速箱
8自动调整全钢正时链条 凸轮轴及水泵、终身免维护
锐利.高瞻远瞩
君越同等强度
3五点式运动前进气格栅 家族风格、提高进气效率笑脸设计象征着吉利和谐，和气生财，左右逢源 筒状聚光设计、橙色飞去来器设计充满未来感和运动气息，目光锐利.高瞻远瞩 风阻系数0.28,降低油耗高速平稳 宽而厚实，稳定而安全
3车窗一触式升降及防夹 车窗延时功能，驾驶员侧
二 5双环自发光仪表盘 、 6绿色隔热玻璃 驾 7NVH静音工程
1全球同步上市 2福特C1平台 4中央交汇式车头设计 5三高鹰眼式前大灯 6犀利的雾灯设计 7A柱倾角35度 1环抱一体式设计 2六向调节运动座椅 4软质化仪表台
2003年同步上市共获99项世界大奖欧洲年度车型第二名 马自达、沃尔沃、福特共同打造 发动机盖线条，流畅 防水式设计，穿透能力强 运动化座舱、豪华游艇设计 防滑设计，带腰部支撑 触感极佳、荔枝纹设计 跑车化设计、黑底桔光 防紫外线、减少空调开启时间 ABC柱隔音材料，地板仪表板等 上坡下坡调整高度 双感知器、氮气填充 BA刹车辅助，增加制动力 超过强度钢材、最高1480兆帕 松下品牌、AUX音频输入 前排左右、花粉过滤器 扶手储物盒内 前座杯托、眼镜盒、超大储物箱 预紧限力式 碰撞时缓冲 可开启和关闭 可固定儿童座椅 方便存取后备箱物品如钥匙 雕塑感 美观动感、降低风阻 前后呼应、分体式设计 内部大型防撞钢梁、帽形设计 一键式开启、容积377L 收音机及除雾功能 运动感、美观 超声波探测、精确安全 强壮有力，肌肉感 速度感驾驶安全感 楔形设计、水滴状、斥水式 一体造型贯穿车身 有效缩短刹车距离仅38米 195/65R15,205/55R16
8大灯高度可调开关 9两级式智能安全气囊 11可溃式刹车踏板 12四门防撞钢梁 14立体声音响系统 15双区独立控制空调 1612V电源输出插座 17多处储物空间
驶 10EHPAS电子液压方向盘 转向精确智慧辅助车速感应5.1米 可溃式设计、高度前后四向可调
室 13发动机芯片锁止防盗 折叠遥控钥匙，密码锁止
星骋六方位说明练习卡
方位 一 、 车 前 方 配 备（F) 特 征(A) 利益点(B)
与沃尔沃S40同一平台、福克斯 蓄势待发，动感时尚，引领潮流，瞩目焦点 锐利有神，清晰视野 充满未来感，便于操控、驾驶安全 驾乘舒适，减轻长途驾驶的疲劳 过收费站缴费方便 格调高雅，防止光线反射刺眼 蓝色氛围灯 空调效果好，高效省油 图书馆式静音设计 保持良好视野，减少盲区 温度更低、减少二次伤害 刹车效果好，碰撞减轻腿部伤害 核潜艇采用钢材强度 携带方便，防盗安全 高中低音搭配，剧院级音响效果 保持车内空气清新 给手机提供充电电源，隐藏安全 人性化设计 减轻碰撞时对胸部造成二次伤害 减轻对颈椎的伤害 保障儿童安全 人性化设计，安全可靠 便于存放大型超长物品 前后呼应，完美造型 风阻系数0.28 高效节能，反应速度快 高强度钢材1480兆帕 方便实用 雨雾天良好视野 高档车配备 质量可靠，整车质保 时尚动感，提高钢材张力 高速车身更稳定 高速公路雨雾天气良好视野 动感锐利，减少风阻 紧急刹车增加安全距离，降低追尾风险 高速行驶抓地力