Vacuum Bag MSDS
预防肌肉骨骼疾病（MSDs）的HSE信息单：搬运路缘石说明书
HSE information sheetIntroductionThis information sheet explains how to manage the risks associated with the repetitive manual handling of kerbs and associated products. The guidance is relevant to the whole supply chain involved in the use of kerbs including clients, designers, manufacturers, suppliers and contractors.BackgroundTraditionally, kerbs (in one form or another) have been specified on the majority of roads. The standard components used are principally precast concrete and weigh approximately 67 kg. Feature kerbs, stone kerbs or other associated products may be considerably heavier. More recently a number of manufacturers have developed lighter kerbs.The main hazards associated with the manual handling of kerbs are the weight of the kerb, the repetitive nature of the work and poor posture during the work. These hazards create excessive stress and strain on the body, which can cause damage to muscles and tendons, and in the longer term may lead progressively to more serious injury. These injuries are commonly referred to as musculoskeletal disorders (MSDs).MSDs account for a significant proportion of accidents and injuries in construction. They are a main reason for people having to leave the construction industry.What the law requiresThe Manual Handling Operations Regulations 1992 (as amended 2004)1 apply to all construction work. They set out a framework for employers to tackle the risks from manual handling. Under these regulations, if employers cannot avoid manual handling where there is a risk of injury, they must assess their manual handling operations and take steps to reduce the risk of injury to the lowest level reasonably practicable.Kerb laying by hand involves a serious risk of injury to those who are doing the work and therefore employers need to take action to control this risk.Construction Information Sheet No 57 Controlling the riskWhen tackling the risk, the best solutions will be those which address all three main hazards: the weight of the kerb; the repetitive nature of the operation; and poor posture during the work.To help find the best solution, we suggest you use the following ‘hierarchy of control measures’. You should try to adopt the solutions nearest the top of the hierarchy first, as these will give the best level of risk control.The hierarchy of control measuresEliminationEliminate manual lifting of kerbs at the design stage, (eg use alternative construction methods that do not involve manual handling or eliminate the need for the kerb).Total mechanisationEnsure kerbs are always handled and laid mechanically (eg using vacuum devices/mechanical grabs etc). This is the preferred solution for new build, refurbishment works and work involving the use of large, special purpose kerbs.Partial mechanisationEnsure that the maximum amount of the kerb handling process is undertaken mechanically (eg using mechanical solutions to get the kerb near its final position, off-loading using a hoist etc). Usingsmaller/lighter kerbs or handling aids will further reduce the risks from any residual manual handling.Manual handlingIn rare cases where it is not possible to use any of the above solutions, short stretches of kerb may be laid manually. Where this is necessary workers should be trained in good handling techniques. The use of lighter-weight kerbs, or devices which allow two people to share the lift, will further reduce the risk of injury.PrecautionsAll of those involved in the specification, manufacture, supply and installation of road edge details can help to reduce the risks from manual handling.Designers, planning supervisors and clientsThose involved in design and planning should consider: ● solutions that eliminate the need for repetitivemanual handling;● specifying kerb units that are compatible withmechanical handling solutions;● appropriate use of alternative lightweight kerbproducts;● the risks during the lifetime of the kerb, includingrepair and maintenance issues;● maximising the number of kerbs to be laid at onetime to realise economies of scale and promotethe practicability of mechanical handling. Manufacturers and suppliersKerb manufacturers should seek to minimise the risks associated with their product range throughout the supply chain, including;● supplying kerbs in a format compatible withcommonly used mechanical handling equipment;● providing information to the user including clearlymarking pack weights and component weights;● ensuring, where possible, pack sizes are below1 tonne to allow handling by a wide range ofcommonly used site equipment.ContractorsContractors should plan and assess the work to ensure risk is kept to an acceptable level. This may involve:● economies of scale through re-phasing of thework to maximise the efficiency of the kerb layingoperation;● safe storage and secure transport of kerbs;● laying direct from the pack rather than doublehandling by stringing out ahead of final laying;● use of machinery capable of handling both packsand individual kerbs;● mechanical solutions for handling non-standardkerb details such as feature kerbs, transitionkerbs, drop kerbs, quadrants and radius kerbs;● training of workers in the safe use of mechanicallifting equipment;● use of alternative lightweight kerb components toreduce residual manual effort;● providing training in good handling techniques forworkers involved with kerb laying. Mechanical kerb handling solutionsVacuum liftersA number of manufacturers produce equipment to handle kerbs using vacuum technology. The machines can be fitted with a number of interchangeable headsto allow different products to be handled.Figure 1 Handling kerbs using a vacuum lifterSelf-containedThese devices can be either fitted on the forks of standard construction machines or mounted on trailers which allow the kerbs to be laid straight from the pack without the need to ‘string out’. A vacuum provides both the attachment to the kerb and the lifting force.Fork mountedVacuum lifters can be mounted on standard construction lifting equipment. Kerb laying can be undertaken using a single machine, which carries the pack of kerbs and provides the mechanical lift. The vacuum lifter can be powered independently or by the hydraulics of the machine on which it is mounted.Trailer mountedTrailer-mounted machines offer a stand-alone handling solution that can be towed at road speeds between locations. They may be useful for contractors who lay small numbers of kerbs in multiple locations. IndependentThese are self-contained units, which create a vacuum to attach to the kerb. They have to be fitted to a lifting device to lift and position the load. Grabs/clampsA number of devices are available which clamp the kerb, either hydraulically or by friction and self-weight. Grabs have traditionally been used with success to handle packs of kerbs and larger precast components. Smaller grabs can be used to handle individual kerbsand avoid manual handling.Figure 2 Vehicle-mounted crane and mechanical grabThe grabs can be used with existing construction plant, such as a backhoe or mini digger, to provide the lifting effort. They can be used to lift the kerbs from the pack and place them directly at the point of lay, minimising the manual handling input.Return to workEmployers should consider how to manage workers who have suffered manual handling injury, in particular their return to work. For most lower back injuries,staying mobile can assist recovery. With an employer’s good management, including a ‘back-to-work’ plan, in most cases the affected person will be able to return to work. Good management would include reviewing your risk assessment and obtaining medical advice. Further information is available on the HSE Back pain 2 and Sickness absence 3 web pages. Wider applicationsThe information in this document is relevant for other precast concrete components such as drainagechannels, slabs, ducts, copings and hard landscaping materials. Many of the solutions used for themechanical handling of kerbs can be used to handle other products.References and further reading References 1Manual Handling Operations Regulations 1992 SI 1992/2793 The Stationery Office 1992 ISBN 0 11 025920 3, as amended 2004 2 /msd/backpain/index.htm 3/sicknessabsence/index.htmFurther readingBacks for the future: Safe manual handling in construction HSG149 HSE Books 2000 ISBN 0 7176 1122 1Manual handling assessment charts Leaflet INDG383 HSE Books 2003 (single copy free or priced packs of 10 ISBN 0 7176 2741 1)Manual handling. Manual Handling Operations Regulations 1992 (as amended). Guidance on Regulations L23 (Third edition) HSE Books 2004 ISBN 0 7176 2823 XGetting to grips with manual handling: A short guide Leaflet INDG143(rev2) HSE Books 2004 (single copy free or priced packs of 15 ISBN 0 7176 2828 0) Are you making the best use of lifting and handling aids? Leaflet INDG398 HSE Books 2004 (single copy free or priced packs of 15 ISBN 0 7176 2900 7)AcknowledgementsThis publication has been produced with the support and assistance of the following organisations: InterpaveThe precast concrete paving and kerb association The Construction ConfederationThe Cilvil Engineering Contractors AssociationFurther informationHSE produces a wide range of documents. Some areavailable as printed publications, both priced and free,and others are only accessible via the HSE website,.HSE priced and free publications are available by mailorder from HSE Books, PO Box 1999, Sudbury, SuffolkCO10 2WA Tel: 01787 881165 Fax: 01787 313995Website: (HSE priced publicationsare also available from bookshops and free leaflets canbe downloaded from HSE’s website: .)For information about health and safety ring HSE’sInfoline Tel: 08701 545500 Fax: 02920 859260 e-mail:**********************************************Information Services, Caerphilly Business Park,Caerphilly CF83 3GG.This leaflet contains notes on good practice which arenot compulsory but which you may find helpful inconsidering what you need to do.© Crown copyright This publication may be freelyreproduced, except for advertising, endorsement orcommercial purposes. First published 2/05. Pleaseacknowledge the source as HSE.。
氯化钙英文版MSDS_ calcium chloride anhydrous
Material Safety Data SheetCalcium chlorideSection 1 - Chemical Product and Company IdentificationMSDS Name: Calcium chloride anhydrous.Synonyms: Calcium dichloride anhydrous .Company Identification: Zigong Long Sheng chemical CompanySection 2 - Composition, Information on IngredientsSection 3 - Hazards IdentificationEMERGENCY OVERVIEWAppearance: slightly beige solid.Potential Health EffectsEye: Causes eye irritation.Skin: May cause skin irritation. May cause dermatitis. May be harmful if absorbed through the skin.Ingestion: May cause irritation of the digestive tract. May be harmful if swallowed. Inhalation: May cause respiratory tract irritation. May be harmful if inhaled. Chronic: Laboratory experiments have resulted in mutagenic effects. Chronic exposure may cause blood effects. Exposure to high concentrations may cause central nervous system depression. Animal studies have reported the development of tumors.Section 4 - First Aid MeasuresEyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.Skin: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Ingestion: Do not induce vomiting. Get medical aid if irritation or symptoms occur. Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.Notes to Physician: Treat symptomatically and supportively.Section 5 - Fire Fighting MeasuresGeneral Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Substance is noncombustible.Extinguishing Media: Substance is noncombustible; use agent most appropriate to extinguish surrounding fire.Flash Point: Not applicable.Autoignition Temperature: Not applicable.Explosion Limits, Lower:Not available.Upper: Not available.NFPA Rating: (estimated) Health: 2; Flammability: 0; Instability: 1Section 6 - Accidental Release MeasuresGeneral Information: Use proper personal protective equipment as indicated in Section 8.Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Provide ventilation. Do not let this chemical enter the environment.Section 7 - Handling and StorageHandling: Use with adequate ventilation. Minimize dust generation and accumulation. Do not get in eyes, on skin, or on clothing. Do not ingest or inhale.Storage: Store in a cool, dry place. Store in a tightly closed container.Section 8 - Exposure Controls, Personal ProtectionEngineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.Exposure LimitsOSHA Vacated PELs: Calcium chloride dihydrate: No OSHA Vacated PELs are listed for this chemical. Calcium chloride anhydrous: No OSHA Vacated PELs are listed for this chemical.Personal Protective EquipmentEyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.Skin: Wear appropriate protective gloves to prevent skin exposure.Clothing: Wear appropriate protective clothing to prevent skin exposure. Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.Section 9 - Physical and Chemical PropertiesPhysical State: SolidAppearance: white - slightly beigeOdor: odorlesspH: 4.5 - 6.5 (100 g/L aq.sol.)Vapor Pressure: 0.01 mm Hg @ 20 deg CVapor Density: Not available.Evaporation Rate:Not available.Viscosity: Not available.Boiling Point: Not available.Freezing/Melting Point:175 deg CDecomposition Temperature:Not available.Solubility: 1000 g/L (0癈)Specific Gravity/Density:0.830Molecular Formula:CaCl2.2H2OMolecular Weight:147.02Section 10 - Stability and ReactivityChemical Stability: Hygroscopic: absorbs moisture or water from the air. Conditions to Avoid: Incompatible materials, dust generation, excess heat, exposure to moist air or water.Incompatibilities with Other Materials: Bromine trifluoride, water, strong acids, zinc, polymerizable compounds (e.g. butadiene, methyl acrylate, styrene, vinyl chloride).Section 11 - Toxicological InformationLD50/LC50:Not available.CAS# 10043-52-4:Oral, mouse: LD50 = 1940 mg/kg;Oral, rabbit: LD50 = 1384 mg/kg;Oral, rat: LD50 = 1 gm/kg;Epidemiology: Tumorigenic effects have been reported in experimental animals. Teratogenicity: No information foundReproductive Effects: No information foundMutagenicity: Mutagenic effects have occurred in experimental animals. Neurotoxicity: No information foundOther Studies: No information foundSection 12 - Ecological InformationEcotoxicity: No data available. No information available.Environmental: No information available.Physical: No information available.Other: Do not empty into drains.Section 13 - Disposal ConsiderationsChemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.Section 14 - Transport InformationS hipping Name:Calcium ChlorideHazard Class: Not ListedUN Number: Not ListedPacking Group:Not ListedSection 15 - Regulatory InformationUS FEDERALTSCACAS# 10035-04-8 is not on the TSCA Inventory because it is a hydrate. It is considered to be listed if the CAS number for the anhydrous form is on the inventory (40CFR720.3(u)(2)).CAS# 10043-52-4 is listed on the TSCA inventory.Health & Safety Reporting ListNone of the chemicals are on the Health & Safety Reporting List.Chemical Test RulesNone of the chemicals in this product are under a Chemical Test Rule.。
车间常用英语
【文件编号】中材科技风电叶片车间常用英语受控状态__________发放编号__________编制：__________审核：__________批准：__________目录组件/Parts (4)设备&工装/Equipments&Devices (4)材料/Material (5)玻纤类/Fabric (5)芯材类/ Core Material (5)耗材类/Consumables (6)辅材类/Adding Material (6)树脂&粘接胶/Resin &Glue (6)油漆&腻子/Paint& Filler (6)避雷系统/Lightning Protection System (6)金属件/Metal Pieces (7)2.工艺过程常用中英文词汇对照表 (7)工序类/Procedure (7)模具调试/Mold Debug (8)来料检查/ Incoming Inspection (8)铺层/Lamination (8)灌注&预固化/Infusion&Pre-curing (9)粘接/Bonding (9)后处理/ Post-processing (10)3. 缩写/ Abbreviation (10)4. 维修工艺/ Maintenance Craft (14)4.1 真空灌注工艺维修方案/Infusion Process (14)4.1.1维修流程/Repaire Flow Diagram (14)4.1.2主要流程工序/Primary Process Flow (14)4.2 手糊真空袋压工艺/Hand-layup Vacuum Bag Molding Process (17)4.2.1 维修流程/Repaire Flow Diagram (17)4.2.2 主要流程工序/Primary Process Flow (17)4.3 手糊工艺维修方案/ Hand Layup Process (20)4.3.1维修流程/Repair Flow Diagram (20)4.3.2 主要流程工序/Primary Process Flow (20)5.常见缺陷/ Common Defects (21)1.常用中英文词汇对照表2.工艺过程常用中英文词汇对照表3. 缩写/Abbreviation4. 维修工艺/Maintenance Craft4.1 真空灌注工艺维修方案/Infusion Process真空灌注工艺适用于维修面积较大、层数较多、对产品外观有较大影响、关键部件出现的缺陷和影响合模粘接界面的区域等的维修，具体操作要求如下：Vacuum infusion process repaire apply to the defect which refer to larger defective area ，higher-rise layers and greater influence of product Configuration ，critical components ，bonding zone. Detailed requirements are as follows:4.1.1维修流程/Repaire Flow Diagram4.1.2主要流程工序/Primary Process Flow4.1.2.1缺陷去除/Defect Removing使用角磨机等工具将缺陷区域磨开，以去除缺陷。
真空泵油MSDS
真空泵油MSDS材料吸收泄漏物，并将其放入合适的中妥善处理。
避免将泄漏物排入下水道或土壤中。
7.操作处理与储存操作处理储存避免吸入油雾或蒸汽，避免接触皮肤和眼睛。
使用时请穿戴适当的个人防护装备，如手套、防护眼镜等。
在使用过程中，不要吸烟、吃东西或喝饮料。
使用后请清洗手部和暴露的皮肤。
存放在干燥、通风良好的地方，远离火源和热源。
储存温度不得超过40℃。
避免与强氧化剂接触。
8.个人防护设备呼吸系统防护手防护眼防护身体防护如有必要，请佩戴适当的呼吸装置。
戴上耐油手套。
佩戴安全眼镜或面罩。
穿戴防护服或工作服，避免暴露皮肤。
9.物理和化学性质外观颜色气味沸点范围相对密度黏度透明液体淡黄色淡石油气味约250℃0.85-0.87 g/cm³约68 mm²/s10.稳定性和反应活性稳定性反应活性在正常使用条件下，稳定性良好。
避免与强氧化剂接触。
11.毒理学信息急性毒性慢性毒性皮肤刺激性眼刺激性口服毒性吸入毒性LD50（大鼠，口服）>5000mg/kg 无慢性毒性有可能引起轻微的皮肤刺激。
有可能引起轻微的眼刺激。
口服毒性低。
吸入毒性低。
12.生态学信息生态效应生物降解性对水体的影响对土壤的影响对空气的影响无生态效应。
不易生物降解。
不应排放入水体。
不应排放入土壤。
不应排放入空气。
13.处置信息处理方法包装处置避免将废弃物排入下水道或土壤中。
请按照当地法规妥善处理废弃物。
废弃物应储存在合适的中，以避免泄漏。
请按照当地法规处理废弃物包装。
XXX residual materials。
absorbent materials should be used and then XXX of。
It is also XXX.7.Handling。
Storage。
and DisposalIf there is a risk of inhaling vapors。
sprays。
or smoke。
use a local XXX fires。
力恒_MSDS_Wafer_TSMC_0.11um_20151016
10.STABILITY AND REACTIVITY
Stability：Stable Conditions to avoid：Contact with powerful oxidizing agents such as Fluorine, Chlorine Trifluride, Oxygen Difluride, may cause fires. Materials to avoid：Strong oxidizing agents. Hazardous decomposition products：Silicon will dissolve in Hydrofluoric acid and produce a corrosive gas- Silicon Tetrafluoride.
6.ACCIDENTAL RELEASE MEASURES
Personal precautions：NA Environmental precautions：NA Methods for cleaning up：Use dustless method (vacuum) and place into closable container for disposal,
9.PHYSICAL AND CHEMICAL PROPERTIES
Appearance：Solid pH value：NA Melting point：NA Auto ignition temperatureRelative vapour density：NA density：2.2 (specific gravity) Color：Iron grey Odor：None Boiling point / range ：2230℃ Flash point：NA ℉ NA ℃ Explosion limits：NA Solubility in water：Insoluble in water evaporation：NA
半导体行业常用名词解释
系統
設備/材料
其他
常用名詞解釋
項次 簡稱 PCW DIWS DIWR CW GEX SEX VEX AEX PV CV GIS GDS GMS SCADA HPCDA C/R L/C EFS DPS DPG EMO GALV AP BA BAS EP EPS V+V C-22 SS MSDS SL1/SL2 NO NC CQC SPEC 英文名稱 Process Cooling Water Deionized Water Supply Deionized Water Return City Water General Exhaust Scrubber Exhaust Solvent Exhaust Ammonia Exhaust Process Vacuum Clean Vacuum Gas Information System Gas Detector System Gas Monitoring System Supervisory Control And Data Acquisiton High Pressure Compress Dry Air Clean Booth Clean Room Load Cell(Scale) Excel Flow Sensor Differential Pressure Switch Differential Pressure Gauge Emergency Menual Shut-Off Galvanized Acid Pickled Bright Annealing Bright Annealing+Super Micro Cleaning Electro Polishing Electro Polishing+Super Micro Cleaning Vim(Vacuum Induction Melting)+Var(Vacuum Arc Remelting) Hastelloy Stainless Steel Material Safety Data Sheet Safety Level 1/2 Normally Open Normally Close Continue Quality Control Specification 中文說明 製程冷卻水 純水（去離子水）供應端 純水（去離子水）回水端 自來水 一般排 酸鹼排 有機排 氨排 製程真空 清潔用真空 氣體監控系統 電力遙控系統 高壓壓縮乾燥空氣 無塵隔間 無塵室 磅秤 過流量計 差壓計 差壓表 緊急開斷裝置 鍍鋅管材 化學酸洗 鈍化處理 鈍化處理＋精密洗淨 電解拋光 電解拋光＋精密洗淨 真空二重溶解超清淨鋼 耐腐蝕性（材料） 不銹鋼 物質安全資料表 安全等級1/2 常開 常關(閉) 連續品質控制 規範 備註
MSD Control Procedure
1.PURPOSE目的：Provide a handing Instruction for Moisture Sensitive Devices.为温湿敏感元件提供正确的处理指引。
2.SCOPE 范围：Compliant for management and controlling of Moisture Sensitive Device in Flexpower Shenzhen. 本程序适用于深圳伟创力电源的温湿敏感元件.3.DEFINITION 定义：MSDs Moisture Sensitive Device(Components whose package marked with picture1).温湿敏感元件(外包装袋上标有中图1标识的元件)MBB Moisture Barrier Bag 防潮袋RH Relative Humidity 相对湿度RIP Raw In Process 在制品物料暂存HIC Humidity Indicator Card, A card on which a moisture sensitive chemical is printed such that it will change color from blue to pink when the indicatedrelative humidity is exceeded. 湿度指示卡：表面涂有湿度敏感化学原料，当湿度超过一定范围时卡会由蓝色变为粉红色。
Level/MSL湿度敏感元件敏感等级.Shelf Life The time that a dry-packed moisture-sensitive device may be stored in an unopened moisture barrier bag(MBB).It’s printed on the MBB. 保存期限指温湿敏感元件在防潮袋中（开封前）的保存时间。
车间常用英语(风电叶片行业)
【文件编号】中材科技风电叶片车间常用英语受控状态__________发放编号__________编制：__________审核：__________批准：__________目录组件/Parts (4)设备&工装/Equipments&Devices (4)材料/Material (5)玻纤类/Fabric (5)芯材类/ Core Material (6)耗材类/Consumables (6)辅材类/Adding Material (7)树脂&粘接胶/Resin &Glue (7)油漆&腻子/Paint& Filler (7)避雷系统/Lightning Protection System (7)金属件/Metal Pieces (8)2.工艺过程常用中英文词汇对照表 (8)工序类/Procedure (8)模具调试/Mold Debug (9)来料检查/ Incoming Inspection (9)铺层/Lamination (10)灌注&预固化/Infusion&Pre-curing (10)粘接/Bonding (11)后处理/ Post-processing (12)3. 缩写/ Abbreviation (12)4. 维修工艺/ Maintenance Craft (16)4.1 真空灌注工艺维修方案/Infusion Process (16)4.1.1维修流程/Repaire Flow Diagram (17)4.1.2主要流程工序/Primary Process Flow (17)4.2 手糊真空袋压工艺/Hand-layup Vacuum Bag Molding Process (21)4.2.1 维修流程/Repaire Flow Diagram (21)4.2.2 主要流程工序/Primary Process Flow (21)4.3 手糊工艺维修方案/ Hand Layup Process (24)4.3.1维修流程/Repair Flow Diagram (25)4.3.2 主要流程工序/Primary Process Flow (25)5.常见缺陷/ Common Defects (26)1.常用中英文词汇对照表2.工艺过程常用中英文词汇对照表3. 缩写/Abbreviation4. 维修工艺/Maintenance Craft4.1 真空灌注工艺维修方案/Infusion Process真空灌注工艺适用于维修面积较大、层数较多、对产品外观有较大影响、关键部件出现的缺陷和影响合模粘接界面的区域等的维修，具体操作要求如下：Vacuum infusion process repaire apply to the defect which refer to larger defective area ，higher-rise layers and greater influence of product Configuration ，critical components ，bonding zone. Detailed requirements are as follows:4.1.1维修流程/Repaire Flow Diagram4.1.2主要流程工序/Primary Process Flow4.1.2.1缺陷去除/Defect Removing使用角磨机等工具将缺陷区域磨开，以去除缺陷。
各类包装术语
各类包装术语包装材料(packaging materials)外部尺寸(outside dimensions)长x宽x高(length x width x height)毛/凈重[GW (gross weight) /NW (net weight) ]单/双/三坑纸箱(single/double/3 regular slotted carton/box)刀卡(fluted coupling sheet/overlap-type cardboard)卡板(pallet)叉车(forktruck)包装带(packaging strapping/PP-straps)胶箱(plastic container)封口胶袋(closed /sealed poly bag)透明膜(保鲜纸) (transparent plastic film circle the pallet/stretch poly wrap) 包装标识(label)条形码(bar code)气泡袋(bubble bag)珍珠棉袋(foam bag)拷贝纸(tissue papper)有唛胶袋(logo polybag)隔板(pad separator; clapboard; partition board/sheet)波纹隔板(corrugated cardboard/sheet)吸塑罩(blister plate/PVC tray)吸塑包装(shrinkage package)瓦楞蛋格卡通箱(corrugated egg-crate carton)装卡通箱蛋格(in egg tray with carton packages)天地盒(full telescope)蛋格包装：egg crate聚苯乙烯泡沫塑料(白色泡沫) (styrofoam)如果是木制卡板要有卡板消毒熏蒸证明(If wooden pallet, the certificate of fumigation for pallet)单件装(item/ sales (consumer) pack)多件装(multipack)整卡装[unitload (pallet)]1 ABS （丙烯腈/丁二烯/苯乙烯）共聚物2 AS （丙烯腈/苯乙烯）共聚物3 AL 铝箔4 BOPA 双向拉伸尼龙（聚酰胺）5 BOPET 双向拉伸涤纶（聚酯）6 BOPP 双向拉伸聚丙烯7 CPP 流延聚丙烯8 EMA （乙烯/甲基丙烯酸）共聚物9 EV A （乙烯/乙酸乙烯）共聚物10 EVOH （乙烯/乙酸醇）共聚物11 HDPE 高密度聚乙烯12 LDPE 低密度聚乙烯13 MBS （甲基丙烯酸酯/丁二烯/苯乙烯）共聚物14 MDPE 中密度聚乙烯15 BOPP 双向拉伸聚丙烯16 PA 聚酰胺17 PAPER 纸18 PC 聚碳酸酯19 PE 聚丙烯20 PET 聚对苯二甲酸乙醇酯21 PO 聚烯烃22 PP 聚丙烯23 PT 玻璃纸（赛璐玢）24 PV A 聚乙烯醇25 PVC 聚氯乙烯26 PVDC 聚偏二氯乙烯27 UPVC 非增塑聚氯乙烯28 VMBOPP 真空镀铝双向拉伸聚丙烯29 VMCPP 真空镀铝流延聚丙烯30 VMPET 真空镀铝聚酯纸箱Carton 瓦椤纸箱Corrugated Carton 旧瓦椤纸箱Old Corrugated Carton (O．C．C．) 木箱Wooden Case 板条箱Crate 木条箱Wooden Crate 竹条箱Bamboo Crate胶合板箱Plywood Case 三层夹板箱3--Ply Plywood Case镀锡铁皮胎木箱Tin Lined Wooden Case 盒Box 木盒Wooden Box 铁盒Iron Box塑料透明盒Plastic Transparency Box 苯乙烯盒Styrol Box 袋Bag(Sack) 布袋Cloth Bag草袋Straw Bag 麻袋Gunny Bag／Jute Bag 旧麻袋Used Gunny Bag／Old Gunny Bag 新麻袋New Gunny Bag 尼龙袋Nylon Bag 聚丙烯袋Polypropylene Bag聚乙烯袋Polythene Bag 塑料袋Poly Bag 塑料编织袋Polywoven Bag 纤维袋Fibre Bag玻璃纤维袋Glass Fibre Bag 玻璃纸袋Callophane Bag防潮纸袋Moisture Proof Pager Bag 乳胶袋子Emulsion Bag锡箔袋Fresco Bag 特大袋Jumbo Bag 单层完整袋子Single Sound Bag 桶Drum木桶Wooden Cask 大木桶Hogshead 小木桶Keg 粗腰桶(琵琶桶) Barrel胶木桶Bakelite Drum 塑料桶Plastic Drum 铁桶Iron Drum 镀锌铁桶Galvanized Iron Drum镀锌闭口钢桶Galvanized Mouth Closed Steel Drum镀锌开口钢桶Galvanized Mouth Opened Steel Drum铝桶Aluminum Drum 麻布包Gunny Bale (Hessian Cloth Bag) 蒲包Mat Bale 草包Straw Bale紧压包Press Packed Bale 铝箔包Aluminium Foil Package 铁机包Hard-pressed Bale 木机包Half-pressed Bale 覃（缸）Jar 陶缸Earthen Jar 瓷缸Porcelain Jar壶Pot 铅壶Lead Pot 铜壶Copper Pot 施Bottle 铝瓶Aluminum Bottle 陶瓶Earthen Bottle瓷瓶Porcelain bottle 罐Can 听Tin 绕线筒Bobbin 笼（篓、篮、筐）Basket竹笼（篓、篮、筐）Bamboo Basket 柳条筐（笼、篮、筐）Wicker Basket 集装箱Container 集装包/集装袋Flexible Container 托盘Pallet 件(支、把、个)Piece 架(台、套)Set(Kit) 安瓿Amp(o)ule(药针支) 双Pair 打Dozen 令Ream 匹Bolt(Piece)码Yard卷（Roll(reel) 块Block 捆Bundle 瓣Braid 度Degree 辆Unit(Cart)套（罩）Casing 包装形状Shapes of Packing 圆形Round 方形Square三角形Triangular(Delta Type) 长方形(矩形) Rectangular菱形(斜方形) Rhombus(Diamond) 椭圆形Oval 圆锥形Conical 圆柱形Cylindrical 蛋形Egg-Shaped 葫芦形Pear-Shaped 五边形Pentagon 六边形Hexagon七边形Heptagon 八边形Octagon 长Long 宽Wide 高High 深Deep 厚Thick 长度Length宽度Width 高度Height 深度Depth 厚度Thickness 包装外表标志Marks On Packing下端，底部Bottom 顶部(上部) Top(Upper) 小心Care 勿掷Don't Cast易碎Fragile 小心轻放,小心装运Handle With Care 起吊点(此处起吊) Heave Here易燃物，避火Inflammable 保持干燥，防泾Keep Dry 防潮keep Away from Moisture 储存阴冷处Keep in a Cool Place 储存干燥处Keep in a Dry Place请勿倒置Keep Upright 请勿倾倒Not to Be Tipped 避冷To be Protected from Cold避热To be Protected from Heat 在滚子上移动Use Rollers 此方向上This Side Up由此开启Open from This Side 爆炸品Explosive 易燃品Inflammable遇水燃烧品Dangerous When Wet 有毒品Poison 无毒品No Poison不可触摩Hand off 适合海运包装Seaworthy Packing 毛重Gross Weight (Gr.Wt.)净重Net Weight (Nt.Wt) 皮重Tare Weight 包装唛头Packing Mark包装容积Packing Capacity 包袋件数Packing Number 小心玻璃Glass 易碎物品Fragile易腐货物Perishable 液体货物Liquid 切勿受潮Keep Dry／Caution Against Wet怕冷To Be Protected from Cold 怕热To Be Protected from Heat 怕火Inflammable上部，向上Top 此端向上This Side Up 勿用手钩Use No Hooks 切勿投掷No Dumping切勿倒置Keep Upright 切勿倾倒No Turning Over 切勿坠落Do Not Drop／No Dropping切勿平放Not to Be Laid Flat 切勿压挤Do Not Crush 勿放顶上Do Not Stake on Top 放于凉处Keep Cool／Stow Cool 干处保管Keep in Dry Place勿放湿处Do Not Stow in Damp Place 甲板装运Keep on Deck装于舱内Keep in Hold 勿近锅炉Stow Away from Boiler必须平放Keep Flat/Stow Level 怕光Keep in Dark Place怕压Not to Be Stow Below Other Cargo 由此吊起Lift Here挂绳位置Sling Here 重心Centre of Balance 着力点Point of Strength 用滚子搬运Use Rollers此处打开Opon Here 暗室开启Open in Dark Room先开顶部Romove Top First 怕火，易燃物Inflammable氧化物Oxidizing Material 腐蚀品Corrosive压缩气体Compressed Gas 易燃压缩气体Inflammable Compressed Gas毒品Poison 爆炸物Explosive危险品Hazardous Article 放射性物质Material Radioactive立菱形Upright Diamond 菱形Diamond Phombus双菱形Double Diamond 内十字菱形Gross in Diamond四等分菱形Divided Diamond 突角菱形Diamond with Projecting Ends斜井形Projecting Diamond 内直线菱形Line in Diamond内三线突角菱形Three Line in Projecting Diamond 三菱形Three Diamond附耳菱形Diamond with Looped Ends 正方形Square Box长方形Rectangle 梯形Echelon Formation平行四边形Parallelogram 井筒形Intersecting Parallelsnet weight 净重gross weight 毛重fragile 易碎carton 纸箱poly bag 塑料袋珍珠棉复膜袋PO-film-coated EPE foam bag牛皮纸复合珍珠棉袋EPE Cushioned Kraft Mailer Bag珍珠棉袋EPE bag产品中英文对照名称抗静电袋: ESD bagPE (防静电)袋: PE (anti-PE bagPE (防静电)气泡袋/膜: PE (anti-static) bubble bag / ( wrap / film )PE 导电袋: PE conductive bagPE 导电网格袋: PE conductive grid bagPl let me know whether you have received this e-mail, so you don't have to read it twice! 防静电屏蔽袋子: (anti-static ) shielding bag(防静电)防潮袋/铝箔袋: (anti-static) Moisture Barrier Bag / Aluminum Bag尼龙(真空)袋子: NY (vacuum bag )Yours Sincerely屏蔽膜复合气泡袋/ 膜: shielding bubble bag / film导电膜复合气泡袋/ 膜: conductive film sticked (conglutinated) withbubble bag / film网格膜复合气泡袋/ 膜: conductive grid film sticked (conglutinated)with bubble bag / film牛皮纸复合气泡袋: bubble cushioned (lined) craft / kraft paper mailer ,craft / kraft bubble mailer (mailing bag , envelope )镀铝膜复合气泡袋: bubble cushioned (lined) aluminized (metallized)foil / film mailer , aluminized (metallized) foil /film bubble mailer (mailing bag , envelope )镀铝膜快递袋: aluminized (metallized) foil / film mailer , aluminized (metallized) foil / film mailer (mailing bag , envelope , bag )共挤膜复合气泡袋: poly bubble mailer , poly bubble envelope , polybubble express bag共挤膜快递袋: poly mailer, poly envelope , poly express bag牛皮纸复合珍珠棉袋: EPE foam lined (cushioned ) kraft paper bag /envelope邮递袋/快递袋: mailer , mailing bag , express bag , envelope气泡衬里邮/快递袋: bubble lined / cushioned express evelope / mailer / mailing bagEnvelope / mailer / mailing bag with bubble lining (cushioning ) 隔热材/隔热保温材料: (thermal, heat ) insulation material铝箔气泡隔热材: bubble foil (thermal , heat ) insulation material。
化学品安全技术说明书(MSDS)中英文对照及翻译完整版
[标签:标题]篇一：化学品安全技术说明MSDS-亚硫酸氢钠(中英文对照版本)5.3.5 Sodium Bisulfite1) Chemical Product and Company IdentificationMSDS Name: Sodium Sulfite, AnhydrousCatalog Numbers: S80195, 1MSS44-20, 1MSS4420, BP355 500, BP355-500, BP355500, S430 10, S430 3, S430 500, S430-10, S430-3, S430-500, S43010, S4303, S430500, S447 3, S447 500,S447-3, S447-500, S4473, S447500Synonyms: Sulfurous acid, disodium saltRisk Phrases: 22 36/37/383) Hazards IdentificationEMERGENCY OVERVIEWAppearance: white. Air sensitive. Moisture sensitive. Warning! Causes eye and skin irritation. May cause digestive tract irritation. Causes respiratory tract irritation. May be harmful if swallowed.Target Organs: Central nervous system.Potential Health EffectsEye: Causes eye irritation. May cause chemical conjunctivitis.Skin: Causes skin irritation.Ingestion: May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May be harmful if swallowed.Inhalation: Causes respiratory tract irritation. Can produce delayed pulmonary edema.Chronic: Effects may be delayed.4) First Aid MeasuresEyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.Skin: Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anythingby mouth to an unconscious person. Get medical aid immediately.Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Notes to Physician: Treat symptomatically and supportively.5) Fire Fighting MeasuresGeneral Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Wear appropriate protective clothing to prevent contact with skin and eyes. Wear a self-contained breathing apparatus (SCBA) to prevent contact with thermal decomposition products. Extinguishing Media: Substance is noncombustible; use agent most appropriate to extinguish surrounding fire. Do NOT get water inside containers. Use water spray, dry chemical, carbondioxide, or appropriate foam.6) Accidental Release MeasuresGeneral Information: Use proper personal protective equipment as indicated in Section 8.Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Place under an inert atmosphere. Do not get water inside containers.7) Handling and StorageHandling: Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Handle under an inert atmosphere. Store protected from air. Do not allow contact with water. Wash clothing before reuse. Keep from contact with moist airand steam.Storage: Store in a tightly closed container. Keep from contact with oxidizing materials. Store ina cool, dry, well-ventilated area away from incompatible substances. Keep away from strong acids. Do not expose to air. Store protected from moisture. Store under an inert atmosphere.8) Exposure Controls, Personal ProtectionEngineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.listed for this chemical.Personal Protective EquipmentEyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.Skin: Wear appropriate protective gloves to prevent skin exposure.Clothing: Wear appropriate protective clothing to prevent skin exposure.Respirators: A respiratory protection program that meets OSHA's 29 CFR1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.9) Physical and Chemical PropertiesPhysical State: SolidAppearance: whiteOdor: odorlesspH: Not available.Vapor Pressure: Not available.Vapor Density: Not available.Evaporation Rate: Not available.Viscosity: Not available.Boiling Point: Not available.Freezing/Melting Point: Not available.Autoignition Temperature: Not available.Flash Point: Not available.Decomposition Temperature: > 500 deg CNFPA Rating: (estimated) Health: 2; Flammability: 0; Reactivity: 0Explosion Limits, Lower: Not available.Upper: Not available.Solubility: 23 g/100 mL water (20°C)Specific Gravity/Density: 2.6330g/cm3Molecular Formula: Na2O3SMolecular Weight: 126.0410) Stability and ReactivityChemical Stability: Stable at room temperature in closed containers under normal storage and handling conditions.Conditions to Avoid: Incompatible materials, dust generation, moisture, exposure to air, excess heat.Incompatibilities with Other Materials: Strong oxidizing agents, acids, organics, moisture, air, combustible materials.Hazardous Decomposition Products: Oxides of sulfur.Hazardous Polymerization: Has not been reported.11) Toxicological InformationRTECS#:CAS# 7757-83-7: WE2150000LD50/LC50:CAS# 7757-83-7:Oral, mouse: LD50 = 820 mg/kg;Carcinogenicity:CAS# 7757-83-7: Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.Epidemiology: No information available.Teratogenicity: No information available.Reproductive Effects: No information available.Neurotoxicity: No information available.Mutagenicity: No information available.Other Studies: No data available.12) Ecological InformationEcotoxicity: No data available. No information available.Environmental: No information found.Physical: No information found.Other: No information available.13) Disposal ConsiderationsChemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification. RCRA P-Series: None listed.RCRA U-Series: None listed.US FEDERALTSCACAS# 7757-83-7 is listed on the TSCA inventory.Health & Safety Reporting ListNone of the chemicals are on the Health & Safety Reporting List.Chemical Test RulesNone of the chemicals in this product are under a Chemical Test Rule.Section 12bNone of the chemicals are listed under TSCA Section 12b.TSCA Significant New Use RuleNone of the chemicals in this material have a SNUR under TSCA.SARASection 302 (RQ)None of the chemicals in this material have an RQ.Section 302 (TPQ)None of the chemicals in this product have a TPQ.SARA CodesCAS # 7757-83-7: acute.Section 313No chemicals are reportable under Section 313.Clean Air Act:This material does not contain any hazardous air pollutants. This material does not contain any Class 1 Ozone depletors. This material does not contain any Class 2Ozone depletors.Clean Water Act:None of the chemicals in this product are listed as Hazardous Substances under the CWA. Noneof the chemicals in this product are listed as Priority Pollutants under the CWA. None of the chemicals in this product are listed as Toxic Pollutants under the CW A.OSHA:None of the chemicals in this product are considered highly hazardous by OSHA. STATECAS# 7757-83-7 is not present on state lists from CA, PA, MN, MA, FL, or NJ.California No Significant Risk Level: None of the chemicals in this product are listed. European/International RegulationsEuropean Labeling in Accordance with EC DirectivesHazard Symbols:XNRisk Phrases:R 22 Harmful if swallowed.R 36/37/38 Irritating to eyes, respiratory systemand skin.Safety Phrases:S 24/25 Avoid contact with skin and eyes.WGK (Water Danger/Protection)CAS# 7757-83-7: 1CanadaCAS# 7757-83-7 is listed on Canada's DSL List. CAS# 7757-83-7 is listed on Canada's DSL List.This product has a WHMIS classification of D2B.CAS# 7757-83-7 is not listed on Canada's Ingredient Disclosure List.Exposure Limits16) Additional InformationMSDS Creation Date: 7/15/1999Revision #1 Date: 8/02/2000The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, expressor implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of anythird party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages. 5.3.5亚硫酸氢钠1）化学品名称化学品中文名称：亚硫酸氢钠化学品英文名称：sodium bisulfite篇二：化学品安全技术说明书(MSDS)篇三：详细化学品安全技术说明书(MSDS)化学品安全技术说明书二〇〇六年二月目录表1－001 乙炔气............ 1 表1－002 表1－003 表1－004 表1－005 表1－006 表1－007 表1－008 表1－009 表1－010 表1－011 表1－012 表1－013 氧气.............. 二氧化碳......... 氢气............. 氩气............. 甲烷............. 四氢噻吩......... 活性炭........... 三乙胺........... 硫代磷酰氯....... 硫黄............ 甲胺磷........... 多聚甲醛........ 5 11 13 15 17 19 21 23 25 27 30 32表1－014（附表1－3）甲缩醛34 表1－015 黄磷............ 36 表1－016 氯.............. 38 表1－017 表1－018 表1－019 表1－020 表1－021 表1－022 表1－023 表1－024 表1－025 表1－026 表1－027 表1－028 三氯化磷......... 甲醇............. 液碱............. 氨水............. 硫酸二甲酯....... 甲胺磷........... 液氨............. 氯仿............. 二氯乙烷......... 二硫化碳......... 甲苯............. 盐酸............. 41 45 47 49 52 54 57 59 61 64 66 68表1－029 氯甲烷........... 71 表1－030 硫酸............. 73 表1－031 二甲苯........... 76 表1－032 表1－033 表1－034 表1－035 表1－036 表1－037 表1－038 表1－039 表1－040 表1－041 表1－042 表1－043 醋酸酐........... 多聚甲醛......... 草甘膦........... 稻瘟灵........... 异丙胺........... 漂白粉........... 氯化氢........... 氰化氢........... 氰化钠........... 氯乙酸........... 甲缩醛........... 丙烯腈.......... 78 81 82 84 86 88 90 93 95 97 99 102。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
SECTION 1 : CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONMSDS Name: Vacuum BagManufacture Name: Shenzhen chouqin packaging Co., LtdManufacture Address:Building 13,District B,Da shuitian industry park,guanlan town,Bao’an District,Shenzhen cityManufacture Telephone: +86-755-27521728Manufacturer MSDS Revision Date: October 14, 2010Supersedes: NoneGeneric Description: NoneOTHER/GENERIC NAMES: Moisture Barrier BagGeneral Use:Package.Chemical Name Polyamide CAS# 5892-11-5 % Weight 15.1%Chemical Name Adhesive CAS# Various % Weight 2.6%Chemical Name Polyethylene CAS# 9002−88−4 % Weight 82.3% Trace impurities and additional material names not listed above may also appear in Section 15 towards the end of the MSDS.These materials may be listed for local “Right−To−Know” compliance and for other reasons.SECTION 3 : HAZARDS IDENTIFICATIONEmergency Overview:A metallized plastic film laminate. Not considered hazardous under normal usage. Can release irritating and/or toxic vapors atelevated processing temperatures or if involved in a fire.Applies to All Ingredients:Potential Health Effects:Eye Contact:Not considered hazardous. May cause mechanical irritation if film comes into contact with the eye.Skin Contact:Not considered hazardous.Inhalation:Not a route of exposure under normal usage. Elevated processing temperatures may release irritation vapors.Ingestion:Not a route of exposure. Not considered hazardous.None known.Carcinogenicity:Ingredients found on one of the OSHA designated carcinogen lists are listed below.: No ingredients in this sectionSECTION 4 : FIRST AID MEASURESEye Contact: None needed under normal usage. If material comes into contact with eye, flush eyes with water while holding eyelids apart to ensure complete irrigation.Skin Contact:None needed.Inhalation: None needed under normal usage. If exposed to vapors at elevated processing temperatures, remove to fresh air. Ingestion:None needed.Note to Physicians:None.SECTION 5 : FIRE FIGHTING MEASURESFlash Point:Not applicable.Flash Point Method:Not applicable.Upper Flammable or Explosive Limit:(Volume % in air): Not applicable. Non−volatile solid.Lower Flammable or Explosive Limit: (Volume % in air): Not applicable. Non−volatile solid.Auto Ignition Temperature: Not determinedFlammability Class: OSHA: Not determined.Extinguishing Media:Carbon dioxide, dry chemical, foam, water or other agents as appropriate for materials in surrounding fire.Flame Propagation in Air:RATE (solids): Not determined.Fire Fighting Instructions:Wear NIOSH/MSHA approved positive pressure self−contained breathing apparatus and full protective clothing.Unusual Fire Hazards:None.Hazardous Decomposition Byproducts:Thermal decomposition products may include carbon monoxide, carbon dioxide, organic acids, aldehydes, alcohols and other combustion by−products (oxidized and non−oxidized hydrocarbons).SECTION 6 : ACCIDENTAL RELEASE MEASURESSpill Cleanup Measures:(Always wear recommended personal protective equipment.) Collect and place in a solid waste container.Spills and releases may have to be reported to Federal and/or local authorities. See Section 15 regarding reportingrequirementsSECTION 7 : HANDLING and STORAGEHandling:NORMAL: (Always wear recommended personal protective equipment.) Use normal personal hygiene and good housekeeping. Storage:Store in a cool, dry area, away from direct heat or sunlight.SECTION 8 : EXPOSURE CONTROLS, PERSONAL PROTECTIONEngineering Controls:General room ventilation plus local exhaust at points of fume generation to maintain exposure below thePEL/TLV exposure limits.Skin Protection Description:Not normally required. Use heat resistant gloves if handling melted material.Eye/Face Protection:As a general practice in manufacturing areas, safety glasses that conform to ANSI Z87.1 should be worn.Respiratory Protection:Under normal usage, not normally required. A NIOSH/MSHA approved respirator should be worn in areaswhere the PEL/TLV is exceeded.Other Protective:ADDITIONAL RECOMMENDATIONS: None.Exposure Limits: INGREDIENTS NAME: Particulates ACGIH TLV: TWA = 10 mg/m3 Total Dust; TWA = 3 mg/m3 Respirable Dust OSHA PEL: TWA = 15 mg/m3 Total Dust; TWA = 5 mg/m3 Respirable Dust OTHER LIMIT: Not Applicable OTHER EXPOSURE LIMITS FOR POTENTIAL DECOMPOSITION PRODUCTS: None.Comments:* =Limit established by SCC for internal use.** =Workplace Environmental Exposure Level (AIHA). *** =Biological Exposure Index (ACGIH).SECTION 9 : PHYSICAL AND CHEMICAL PROPERTIESPhysical State/Appearance:Metallized plastic filmOdor:NonePhysical State:SolidpH:Not applicableVapor Pressure:Negligible at room temperature (Air = 1.0): Not determined.Boiling Point:Not applicableMelting Point:221 − 257 deg F (105 – 125 deg C).Solubility:IN WATER (weight %): Negligible.Specific Gravity:(Water = 1.0): 1.0 – 1.1Evaporation Point:Not determined. COMPARED TO: Not applicablePercent Volatile:Negligible.Flashpoint:Not applicable.Auto Ignition Temp:Not determinedUpper Flammable Explosive Limit:(Volume % in air): Not applicable. Non−volatile solid.Lower Flammable Explosive Limit:(Volume % in air): Not applicable. Non−volatile solid. FLASH POINT: Not applicable. (Flash point method and additional flammability data are found in Section 5)SECTION 10 : STABILITY AND REACTIVITYChemical Stability:Normally stable.Conditions to Avoid:Avoid exposure to open flame or temperatures exceeding 455 deg F (235 deg C). The maximum temperature to whichthe film can be exposed will vary with exposure (dwell) time. SCC should be contacted if questions arise concerningspecific processing conditions.Incompatibilities with Other Materials:Strong oxidizers.Hazardous Polymerization:Will not occur.Hazardous Decomposition Products:Thermal decomposition products may include carbon monoxide, carbon dioxide, organic acids, aldehydes, alcohols and other combustion by−products (oxidized and non−oxidized hydrocarbons).SECTION 11 : TOXICOLOGICAL INFORMATIONAcute Health Effects:Not determined.Subchronic Effects:None known.Chronic Effects:None known.Other Toxicological Information:OTHER DATA: None.SECTION 12 : ECOLOGICAL INFORMATIONEcological Paragraph:Material is considered inert and not expected to be biodegradable or toxic.Waste Disposal:Dispose of in compliance with Federal, state, and local government regulations. Usually considered an inert packagingmaterial that can be recycled or landfilled.The information offered here is for the product as shipped. Use and/or alterations to the product such as mixing with other materials may significantly change the characteristics of the material and alter the RCRA classification and the proper disposal method.RCRA Hazard Class: Is the unused product a RCRA hazardous waste if discarded? No. If yes, the RCRA ID number is: Not applicable.SECTION 14 : TRANSPORT INFORMATIONDOT Hazard Class: Not regulated.DOT Identification Number: Not applicable.For additional information on shipping regulations affecting this material, contact the information number found inSection 1.SECTION 15 : REGULATORY INFORMATIONApplies to all ingredients:TSCA 8(b): Inventory StatusAll components are listed on the TSCA Inventory.OTHER TSCA ISSUES: None.Section 304:SARA TITLE III/CERCLA: “Reportable Quantities” (RQs) and/or “Threshold Planning Quantities (TPQ’s) exists for the following ingredients. INGREDIENT NAME: No ingredients listed in this sectionSection 312 Hazard Category:SECTION 311 HAZARD CLASS: None.The following ingredients are SARA 313 “Toxic Chemicals”. CAS numbers and weight percents are found in Section2.INGREDIENTS NAME: No ingredients listed in this sectionState:STATE RIGHT−TO−KNOW: In addition to the ingredients found in Section 2, the following are listed for state right−to−know purposes. INGREDIENT NAME: No ingredients listed in this sectionRegulatory Paragraph:ADDITIONAL REGULATORY INFORMATION: This product is not intended to be used in any application which places the product in direct contact with the humanbody, or in other FDA governed applications, unless specifically designated otherwise in written material supplied bySCC to the purchaser.International Chemical Inventory Lists:FOREIGN INVENTORY STATUS: Not determined.MSDS Revision Date:October 14, 2010Supersedes: Wang ZhongzhuCHANGES TO MSDS FROM PREVIOUS ISSUE DATE ARE DUE TO THE FOLLOWING: None. OTHER INFORMATION: None.。