普瑞灯珠规格书 + 1-3W High Power LED Datasheet + BX45S (6000K) + HUAEN OPTO
高功率LED FX系列3W橙色LED数据表说明书
111 Product Family Data Sheet Rev. 1.1 2020.05.04Features∙Package : Silicone covered Amber LED package∙Dimension : 1.4 mm x 1.8 mm∙Chip Configuration : 1 chip∙ESD Voltage : Up to 8 kV acc. to ISO 10605-contact∙Viewing Angle: 120˚∙Qualifications: The product qualification test based on the guidelines of AEC-Q102.Table of Contents1. Characteristics ----------------------- 32. Product Code Information ----------------------- 43. Typical Characteristics Graphs ----------------------- 74. Soldering Temperature Location ----------------------- 115. Mechanical Dimension ----------------------- 126. Soldering Conditions ----------------------- 137. Tape & Reel ----------------------- 148. Label Structure ----------------------- 159. Packing Structure ----------------------- 1610. Precautions in Handling & Use ----------------------- 1711. Company Information ----------------------- 181. Characteristicsa) Typical Characteristics[T S=25℃][1] Item Symbol Value Unit. Luminous Flux (I F = 1,000 ㎃) ΦV Typ. 210 ㏐Forward Voltage (I F = 1,000 ㎃) V F Typ. 3.0 VViewing Angle ΦTyp. 120 ºReverse Current I R Not designed for reverseoperationReal Thermal Resistance (Junction to Solder point) R th_J-S (Real)Typ. 5.3K/WMax. 5.9Electrical Thermal Resistance (Junction to Solder point) R th_J-S (Elec.)Typ. 4.5K/WMax. 5.0Radian Surface A 1.21 ㎟Note:[1] The measurement condition means that temperature dependence is excluded by applying pulse current for typically 25㎳.b) Absolute Maximum RatingItem Symbol Rating Unit Ambient / OperatingTemperatureT a-40 ~ +125 ºC Storage Temperature T stg-40 ~ +125 ºC LED Junction Temperature T j150 ºC Maximum Forward current[2](T S:25℃) [3]I F1,200 ㎃Minimum Forward current[2](T S:25℃) [3]I F50 ㎃Maximum Reverse currentDo not apply for reverse currentESD Sensitivity[4]- ±8 for HBM kVNote:[2] Driving the product at forward current (IF) below Min. IF or above Max. IF may result in unpredictable behavior of the product.[3] The measurement condition means that temperature dependence is excluded by applying pulse current for typically 25㎳[4] It is included the device to protect the product from ESD.2. Product Code Information1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18S P H A M T A 1 N 3 C 0 A B C D E F Digit PKG Information1 2 company name and Samsung LED PKG (SP for Samsung PKG)3 power variant (H for automotive high power)4 5 color variant (AM for automotive Amber color)6 LED PKG version (T for initial version )7 8 product configuration and type (A1 for automotive 1814 PKG type)9 lens configuration (N for no lens)10 Max power (3 for 3±0.5W)11 12 specific property (C0 for FX Series)13 14 forward voltage property15 16 CIE coordination property17 18 luminous flux propertya) Luminous Flux Bins [5] (I F= 1,000 ㎃, T S= 25 ºC)Symbol Flux Bin CodeFlux Range (㏐)Min MaxΦV P2 160 180 R2 180 200 T1 200 220 U1 220 240b) Voltage Bins [5] (I F= 1,000 ㎃, T S= 25 ºC)Symbol Bin CodeVoltage Range (V)Min MaxV F C5 2.50 3.00 H5 3.00 3.50Note:[5] Luminous flux measuring equipment: CAS140CTΦV and V F tolerances are ±7% and ±0.1V, respectively.c) Color Bins [6] (I F= 1,000 mA)Symbol Color Bin Code Cx CyCx, Cy L0 0.5760 0.5490 0.5620 0.5890 0.4070 0.4250 0.4380 0.4110Note[6] Chromaticity coordinates: C x, C y according to CIE 1931. C x and C y tolerances are ±0.005, respectively.3. Typical Characteristics Graphsa) Spectrum Distribution (I F = 1,000 mA, T s = 25 ºC) [7]b) Typical Chromaticity Coordinate Shift vs Radiation Angle (I F = 1,000 mA, T s = 25 ºC) [7]Note:[7] The measurement condition means that temperature dependence is excluded by applying pulse current for Typically 25ms.0.00.20.40.60.81.01.2380430480530580630680730780R e l a t i v e i n t e n s i t yWavelength0.0000.0250.0500.0750.100-80-60-40-2020406080C h r o m a t i c i t y C o o r d i n a t e S h i f tRadiation AngleΔCx ΔcyW dW d(max)λ[㎚]∆C x , ∆C yφ[º]c) Forward Current Characteristics (T s = 25 ºC) [8]Note:[8] The measurement condition means that temperature dependence is excluded by applying pulse current for typically 25ms.0.00.40.81.21.62.003006009001,200R e l a t i v e L u m i n o u s F l u xForward Current0.00.40.81.21.62.003006009001,200R e l a t i v e F o r w a r d V o l t a g eForward Current-0.010-0.0050.0000.0050.01003006009001200C h r o m a t i c i t y C o o r d i n a t e S h i f tForward CurrentΔCx ΔCyI v I v(1000mA)V F V F(1000mA)∆C x , ∆C yI F [㎃]I F [㎃]I F [㎃]d) Temperature Characteristics (I F = 1,000 mA)0.50.60.70.80.91.01.11.2-40-20020406080100120140R e l a t i v e L u m i n o u s F l u xTemperature0.50.60.70.80.91.01.11.2-40-2020406080100120140R e l a t i v e F o r w a r d V o l t a g eTemperature-0.050-0.0250.0000.0250.050-40-20020406080100120140C h r o m a t i c i t y C o o r d i n a t e S h i f tTemperatureCx CyI v I v(25℃)V F V F(25℃)∆C x , ∆C yT j [ºC]T j [ºC]T j [ºC]e) Derating Curve [9]Note:[9] The measurement condition means that temperature dependence is excluded by applying pulse current for typically 25ms.f) Beam Angle Characteristics (I F = 1,000 mA, T s = 25 ºC)0.00.20.40.60.81.01.21.40102030405060708090100110120130140F o r w a r d C u r r e n tTemperature 0.00.20.40.60.81.01.2-90-80-70-60-50-40-30-20-10102030405060708090R e l a t i v e L u m i n o u s F l u xRadiation Angleφ[º]I v Iv(0º)I F [A]T S [ºC]4. Soldering Temperature LocationT j: Temperature of JunctionT S: Temperature of Solder PadR th_J-S: Thermal Resistance from Junction to Solder Pad5. Mechanical DimensionNote:The dimensions in parentheses are for reference purposes. Notes: Unit: mm, Tolerance: ±0.1mm, Approximate Weight : 4.8mga) Pick and PlaceDo not place pressure on the resin molded partIt is recommended to use a pick & place nozzle AM03-024820A(Hanhwa Techwin), etc.b) Electric Schematic Diagramc) Material InformationDescriptionMaterialSubstrate Cu Lead FrameLED Die Flip Chip Phosphor Phosphor Zener DiodeSilicon Wire Au Resin MoldSiliconeTolerance: ±0.1㎜① ②① Cathode pad ② Anode pad6. Soldering Conditionsa) Pad Configuration & Solder Pad LayoutNotes: ㎜, Tolerance : ±0.10㎜, recommended stencil thickness 120㎛b) Reflow Conditions (Pb free)Reflow frequency: 2 times max.c) Manual Soldering ConditionsNot more than 5 seconds @ max 300 ºC, under soldering iron. (One time only)7. Tape & Reela) Taping DimensionNote:Unit: ㎜, LED taping quantity: 3,000ea (1 Reel)b) Reel DimensionNotes:Unit: ㎜, Tolerance: ±0.2㎜User feed direction →ABCDEFSPHAMTA1N3C0XXXXXX YYYYYY II I IIIIIII I IIIIIII III III II IIIIII I IIIIIII I IIIIIIIISLAAC4001 / I001 / 3,000 pcs IIIIII I IIIIIII III IIII I III I III I III III IIIIIIBin CodeProduct CodeLot NumberABCDEFSPHAMTA1N3C0XXXXXX YYYYYY 01 II I IIIIIII I IIIIIII III III II IIIIII I IIIIIII I IIIIIIII①②③④⑤⑥⑦⑧⑨/1ⓐⓑⓒ/ 3,000 pcs IIIIII I IIIIIII III IIII I III I III I III III IIIIII8. Label Structurea) Label StructureNote: Denoted bin code and product code above is only an example (see description on page 5)Bin Code:ⓐⓑ: Forward Voltage bin (refer to page 5) ⓒⓓ: Chromaticity bin (refer to page 6) ⓔⓕ: Luminous Flux bin (refer to page 5)b) Lot NumberThe lot number is composed of the following characters:①②③③②③④⑤⑥⑦⑧⑨ / I ⓐⓑⓒ / 3,000 pcs ①② :Production site③ : Product state (A: Normal, B: Bulk, C: First Production, R: Reproduction, S: Sample) ④ : Year (D: 2019, E: 2020, F: 2021…) ⑤ : Month (1~9, A, B, C) ⑥ : Day (1~9, A, B~V) ⑦⑧⑨: Serial number (001 ~ 999)ⓐⓑⓒ : Product serial number (001 ~ 999)ⓐⓑⓒⓓⓔⓕ9. Packing Structurea) Packing ProcessDimension of Transportation Box in ㎜Width Length Height220 245 18210. Precautions in Handling & Use1)For over-current-proof function, customers are recommended to apply resistors to prevent suddenchange of the current caused by slight shift of the voltage.2)This device should not be used in any type of fluid such as water, oil, organic solvent, etc. Whenwashing is required, IPA is recommended to use.3)When the LEDs illuminate, operating current should be decided after considering the ambientmaximum temperature.4)LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or moreafter being shipped from Samsung Electronics, they should be packed by a sealed container withnitrogen gas injected.(Shelf life of sealed bags: 12 months, temp. ~40℃, ~90% RH)5)After storage bag is open, device subjected to soldering, solder reflow, or other high temperatureprocesses must be:a. Mounted within 672 hours (28 days) at an assembly line with a condition of no more than30℃/ 60% RH.b. Stored at <10% RH.6)Repack unused products using anti-moisture packing, fold to close any openings and store in a dryplace with <10% RH7)Devices require baking before mounting, if humidity card reading is >60% at 23±5℃.8)Devices must be baked for 1 day at 60±5℃, if baking is required.9)The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band oranti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum ratingis applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs mayshow some unusual characteristics such as increase in leak current, lowered turn-on voltage, orabnormal lighting of LEDs at low current.10)VOCs (volatile organic compounds) may be occurred by adhesives, flux, hardener or organicadditives which are used in luminaires (fixture) and LED silicone bags are permeable to it. It maylead a discoloration when LED expose to heat or light. This phenomenon can give a significant lossof light emitted (output) from the luminaires (fixtures). In order to prevent these problems, werecommend you to know the physical properties for the materials used in luminaires, it requiresselecting carefully.11)Risk of Sulfurization (or Tarnishing)The lead frame from Samsung Electronics is a plated package and it may change to black(or darkcolored) when it is exposed to Ag (a), Sulfur (S), Chlorine (Cl) or other halogen compound. Itrequires attention.Sulfide (Sulfurization) of the lead frame may cause a change of degradation intensity, chromaticitycoordinates and it may cause open circuit in extreme cases. It requires attention.Sulfide (Sulfurization) of the lead frame may cause of storage and using with oxidizing substancestogether.Therefore, LED is not recommend to use and store with the below list. : Rubber, Plain paper, leadsolder cream etc.11. Company Information/ledAbout Samsung Electronics Co., Ltd.Samsung inspires the world and shapes the future with transformative ideas and technologies. The company is redefining the worlds of TVs, smartphones, wearable devices, tablets, digital appliances, network systems, and memory, system LSI, foundry and LED solutions. For the latest news, please visit the Samsung Newsroom at .Copyright © 2018 Samsung Electronics Co., Ltd. All rights reserved.Samsung is a registered trademark of Samsung Electronics Co., Ltd.Specifications and designs are subject to change without notice. Non-metricweights and measurements are approximate. All data were deemed correctat time of creation. Samsung is not liable for errors or omissions. All brand, product, service names and logos are trademarks and/or registered trademarks of theirrespective owners and are hereby recognized and acknowledged.Samsung Electronics Co., Ltd.95, Samsung 2-roGiheung-guYongin-si, Gyeonggi-do, 446-711KOREA/led。
白光LED1瓦灯珠参数是多少
检举|2012-01-04 01:39ice65| 六级
一般用作照明用的LED灯珠由0.5w-5w的都有，
工作电压在3-3.2V左右。
白光LED1瓦灯珠参数是多少
满意回答
检举|2012-05-29 14:56参数是1.8V,0.5A.
区别LED灯珠的方法駋下：1.看亮度,即在350mA的驱动电流，电压在3.0-3.6V之间的时候的亮度是多少，越高越好2.看芯片品牌及大小，品牌有NICHIA、CREE、普瑞、旭明、晶元、新世纪等，越靠前越好，芯片越大越好3.看分BIN，即色温分区和电压分BIN，越细越好4.看衰减，需要做老化测试，光衰越小越好。5.看实际的应用，如比：市场有合适且价格便宜的透镜、铝基板，就好，透镜、铝基板需要开模就会投入大一些赞同0|评论(1)
0
满意回答
检举|2012-01-04 09:34LED灯珠有多种规格：1、
0.06W的，电压是2.5-3.5V，电流是20mA.
2、0.5W的，电压是2.5-3.77V，电流是150mA
3、1W的，电压是2.79-3.99V，电流是350mA
4、3W的，电压是3.05-4.47V，电流是700mA
检举|2012-02-07 19:43zsc_zhen| 五级 1W大功率 电流：350ma
电压：2.8-4.0V 亮度：80-130LM 色温：3000-12000K
我们一般设计是3.6---4.2V,0.2---0.3A.现在还有很多15W的灯珠,
你可以参考一下.如cree mce,cree t6.赞同0|评论
求助知友d1234566 | 当前分类：4 级
小功率led灯珠规格和参数
小功率led灯珠规格和参数小功率LED灯珠是目前市场上应用较广泛的一种照明产品，它具有能耗低、寿命长、发光效果好等优点。
然而，在选择合适的小功率LED灯珠时，了解其规格和参数是非常重要的。
本文将从深度和广度两方面对小功率LED灯珠的规格和参数进行全面评估，并根据此进行有价值的讨论。
1.小功率LED灯珠的规格和参数概述小功率LED灯珠的规格和参数主要包括以下几个方面：(1)功率：小功率LED灯珠的功率通常在0.1瓦特到1瓦特之间，不同功率的LED灯珠适用于不同的照明需求。
(2)亮度：亮度是评估LED灯珠发光效果的一个重要指标，通常以流明(lm)为单位表示。
亮度越高，LED灯珠的照明效果越好。
(3)色温：LED灯珠的色温决定了其发出的光线的颜色，常用的色温单位是开尔文(K)。
低色温LED灯珠发出的是暖黄色光，适合用于室内照明；高色温LED灯珠发出的是冷白色光，适合用于户外照明。
(4)色彩指数：色彩指数是评估LED灯珠还原物体真实颜色能力的指标，常用的色彩指数是Ra。
Ra越高，LED灯珠还原物体颜色的能力越好。
(5)工作电流：LED灯珠的工作电流决定了其亮度和发光效果，一般以毫安(mA)为单位表示。
过高的工作电流会影响LED灯珠的寿命，过低的工作电流会降低其亮度。
2.小功率LED灯珠规格和参数的详细解析为了更深入地了解小功率LED灯珠的规格和参数，我们需要逐一解析每个参数的含义和重要性。
(1)功率：小功率LED灯珠通常使用较低功率的芯片和封装技术，功率在0.1瓦特到1瓦特之间。
较低的功率使LED灯珠在能源消耗方面更加高效，适合用于长时间照明。
(2)亮度：LED灯珠的亮度是指其发出的光线的强度，用流明(lm)表示。
亮度的高低直接关系到LED灯珠的照明效果，较高的亮度能够提供更好的照明体验。
(3)色温：LED灯珠的色温确定了其发光的颜色。
常见的色温范围为2700K到6500K，其中低色温LED灯珠发出暖黄色光，适合用于室内照明，如客厅、卧室等；高色温LED灯珠发出冷白色光，适合用于户外照明，如道路、广场等。
3W High Power LED说明书
3W High Power LEDFeatures● Highest flux per LED family in the world● Very long operating life (up to 100k hours)● Available in Red, Yellow, Green, Blue, White● Lambertian radiation pattern● More energy efficient than incandescent and most halogen lamps● Low voltage DC operated● Cool beam, safe to the touch● Fully dimmable● No UV● Superior ESD protection● lower Rth 3W Blue LED● RoHS compliant — Lead-free● Instant light (less than 100ns )Applications● Portable (flashlight, bicycle)● Reading lights (car, bus, aircraft)● Orientation● Mini-accent● Decorative● Fiber optic alternative● Appliance● Sign and channel letter● Architectural detail● Cove lighting● Automotive exterior (Stop-Tail-Turn,CHMSL,Mirror side repeat) 3W White LED & Aluminum PCB● Edge lit signs (Exit, point of sale)Catalog1. Red 3W High Power LED (2)2. Yellow 3W High Power LED (4)3. Green 3W High Power LED (7)4. Blue 3W High Power LED (9)5. White 3W High Power LED (12)1. Red 3W High Power LEDAbsolute Maximum Ratings (Ta = 25℃)Items Symbol Absolute Maximum RatingUnit Forward Current IF 0.7 A Peak Forward Current* IFP 0.8 A Reverse Voltage VR 5 V Power Dissipation PD 3 W Electrostatic discharge ESD ±2000 V Operation Temperature TOPR -40~+80 ℃ Storage Temperature TSTG -40~+100℃Lead Soldering Temperature*TSOLMax. 260℃ for 3sec Max.*IFP Conditions ：Pulse Width ≤10msec duty ≤1/10* Our MCPCB is usual use for installation and connection during application, but the ability of heat dissipation is not enough. If lighted, our high power stars will need better another type heat dissipation equipment. So we recommend the working time is not over 5 -10 seconds without any heat dissipation equipment. *Reflow, wave peak and soak stannum soldering etc. is not suitable for this products. *Suggest to solder it by professional high power LED soldering machine.*Can use in variable temperature searing iron with soldering condition :≤260 degree less than 3 seconds.Typical Electrical & Optical Characteristics ( Ta = 25℃)Items Symbol Condition Min. Typ. Max. UnitForward Voltage VF IF =0.7A 2.0 2.8 V Reverse Current IRVR=5V50uA50% Power Angle 2θ1/2 IF =0.7A 110 140 deg Luminous IntensityφV IF =0.7A 50 80 lm Recommend Forward CurrentIF0.7 AWave Lengthλd IF =0.7A 620 630 nmNotes:1.Tolerance of measurement of forward voltage ±0.1V. 2.Tolerance of measurement of peak Wavelength ±2.0nm. 3.Tolerance of measurement of luminous intensity ±15%.ChipPART NOMaterial Emitted ColorLens Color LED-P3-D-Red GaAllnPRed ■WATER CLEARTypical Electrical/Optical Characteristics Curves(Ta=25° Unless Otherwise Noted)Radiation Pattern2. Yellow 3W High Power LEDAbsolute Maximum Ratings (Ta = 25℃)Items Symbol Absolute Maximum RatingUnit Forward Current IF 0.7 A Peak Forward Current* IFP 0.8 A Reverse Voltage VR 5V Power Dissipation PD 3 W Electrostatic discharge ESD ±2000 V Operation Temperature TOPR -40~+80 ℃ Storage Temperature TSTG -40~+100℃Lead Soldering Temperature*TSOLMax. 260℃ for 3sec Max.*IFP Conditions ：Pulse Width ≤10msec duty ≤1/10* Our MCPCB is usual use for installation and connection during application, but the ability of heat dissipation is not enough. If lighted, our high power stars will need better another type heat dissipation equipment. So we recommend the working time is not over 5 -10 seconds without any heat dissipation equipment. *Reflow, wave peak and soak stannum soldering etc. is not suitable for this products. *Suggest to solder it by professional high power LED soldering machine.*Can use in variable temperature searing iron with soldering condition :≤260 degree less than 3 seconds. ChipPART NOMaterial Emitted ColorLens Color LED-P3-D-Yellow GaAllnP Yellow ■WATER CLEARTypical Electrical & Optical Characteristics ( Ta = 25℃)Max.UnitTyp.Min.Items SymbolCondition=0.7A 2.0 2.8 VForwardVoltage VF IFReverse Current IR VR=5V 50 uA=0.7A 110 140 deg 50% Power Angle 2θ1/2 IF=0.7A 50 80 lm Luminous Intensity φV IFCurrent IF 0.7 A RecommendForwardnmWave Length λd IF=0.7A 580 595Notes:1.Tolerance of measurement of forward voltage ±0.1V.2.Tolerance of measurement of peak Wavelength ±2.0nm.3.Tolerance of measurement of luminous intensity ±15%.Typical Electrical/Optical Characteristics Curves(Ta=25° Unless Otherwise Noted)Radiation Pattern3. Green 3W High Power LEDAbsolute Maximum Ratings (Ta = 25℃)Items Symbol Absolute Maximum RatingUnit Forward Current IF 0.7 A Peak Forward Current* IFP 0.8 A Reverse Voltage VR 5 V Power Dissipation PD 3 W Electrostatic discharge ESD ±2000 V Operation Temperature TOPR -40~+80 ℃ Storage Temperature TSTG -40~+100℃Lead Soldering Temperature*TSOLMax. 260℃ for 3sec Max.*IFP Conditions ：Pulse Width ≤10msec duty ≤1/10* Our MCPCB is usual use for installation and connection during application, but the ability of heat dissipation is not enough. If lighted, our high power stars will need better another type heat dissipation equipment. So we recommend the working time is not over 5 -10 seconds without any heat dissipation equipment. *Reflow, wave peak and soak stannum soldering etc. is not suitable for this products. *Suggest to solder it by professional high power LED soldering machine.*Can use in variable temperature searing iron with soldering condition :≤260 degree less than 3 seconds.Typical Electrical & Optical Characteristics ( Ta = 25℃)Items Symbol Condition Min. Typ. Max. UnitForward Voltage VF IF =0.7A 3.0 3.8 V Reverse Current IRVR=5V50uA50% Power Angle 2θ1/2 IF =0.7A 110 140 deg Luminous IntensityφV IF =0.7A 120 160 lm Recommend Forward CurrentIF0.7 AWave Lengthλd IF =0.7A 520 530 nmNotes:1.Tolerance of measurement of forward voltage ±0.1V. 2.Tolerance of measurement of peak Wavelength ±2.0nm. 3.Tolerance of measurement of luminous intensity ±15%.ChipPART NOMaterial Emitted ColorLens Color LED-P3-D-Green InGaN Green ■WATER CLEARTypical Electrical/Optical Characteristics Curves(Ta=25° Unless Otherwise Noted)Radiation Pattern4. Blue 3W High Power LEDAbsolute Maximum Ratings (Ta = 25℃)Items Symbol Absolute Maximum RatingUnit Forward Current IF 0.7 A Peak Forward Current* IFP 0.8 A Reverse Voltage VR 5V Power Dissipation PD 3 W Electrostatic discharge ESD ±2000 V Operation Temperature TOPR -40~+80 ℃ Storage Temperature TSTG -40~+100℃Lead Soldering Temperature*TSOLMax. 260℃ for 3sec Max.*IFP Conditions ：Pulse Width ≤10msec duty ≤1/10* Our MCPCB is usual use for installation and connection during application, but the ability of heat dissipation is not enough. If lighted, our high power stars will need better another type heat dissipation equipment. So we recommend the working time is not over 5 -10 seconds without any heat dissipation equipment. *Reflow, wave peak and soakstannum soldering etc. is not suitable for this products. *Suggest to solder it by professional high power LED soldering machine.*Can use in variable temperature searing iron with soldering condition :≤260 degree less than 3 seconds. ChipPART NOMaterial Emitted ColorLens Color LED-P3-D-Blue InGan Blue ■WATER CLEARTypical Electrical & Optical Characteristics ( Ta = 25℃)Max.UnitTyp.Min.Items SymbolCondition=0.7A 3.0 3.8 VForwardVoltage VF IFReverse Current IR VR=5V 50 uA=0.7A 110 140 deg 50% Power Angle 2θ1/2 IF=0.7A 20 50 lm Luminous Intensity φV IFCurrent IF 0.7 A RecommendForwardnmWave Length λd IF=0.7A 460 470Notes:1.Tolerance of measurement of forward voltage ±0.1V.2.Tolerance of measurement of peak Wavelength ±2.0nm.3.Tolerance of measurement of luminous intensity ±15%.Typical Electrical/Optical Characteristics Curves(Ta=25° Unless Otherwise Noted)Radiation Pattern5. White 3W High Power LEDAbsolute Maximum Ratings (Ta = 25℃)Items Symbol Absolute Maximum RatingUnit Forward Current IF 0.7 A Peak Forward Current* IFP 0.8 A Reverse Voltage VR 5 V Power Dissipation PD 3 W Electrostatic discharge ESD ±4500 V Operation Temperature TOPR -40~+80 ℃ Storage Temperature TSTG -40~+100℃Lead Soldering Temperature*TSOLMax. 260℃ for 3sec Max.*IFP Conditions ：Pulse Width ≤10msec duty ≤1/10* Our MCPCB is usual use for installation and connection during application, but the ability of heat dissipation is not enough. If lighted, our high power stars will need better another type heat dissipation equipment. So we recommend the working time is not over 5 -10 seconds without any heat dissipation equipment. *Reflow, wave peak and soakstannum soldering etc. is not suitable for this products. *Suggest to solder it by professional high power LED soldering machine.*Can use in variable temperature searing iron with soldering condition :≤260 degree less than 3 seconds.Typical Electrical & Optical Characteristics ( Ta = 25℃)Items Symbol Condition Min. Typ. Max. UnitForward Voltage VF IF =0.7A 3.2 4.0 V Reverse Current IRVR=5V50uA50% Power Angle 2θ1/2 IF =0.7A 110 140 deg Luminous IntensityφV IF =0.7A 160 180 lm Recommend Forward CurrentIF0.7 A Chromaticity Tc IF =0.7A 6000 6500 kWhite Color Region-- Chromaticity Coordinates X =-- Y =--Thermal Resistance,Junction to CaseRJPIF=0.35A10/W ℃Notes:1.Tolerance of measurement of forward voltage ±0.1V. 2.Tolerance of measurement of peak Wavelength ±2.0nm. 3.Tolerance of measurement of luminous intensity ±15%.ChipPART NOMaterial Emitted ColorLens Color LED-P3-D-White InGaN White □WATER CLEARTypical Electrical/Optical Characteristics Curves(Ta=25° Unless Otherwise Noted)Radiation PatternPackage Dimensions (unit:mm)Notes:All dimensions in mm tolerance is ±0.2mm unless otherwise noted.Box Dimensions3W High Power LED 3W High Power LED & Aluminum PCB50 pcs. Per Box 25 pcs. Per BoxDimensions:13.9mm * 15.0mmDimensions:13.9mm * 17.8mmNote the use of high-power LEDProduct ProtectionLED is the electrostatic sensitive devices, so the product storage, transportation, application process, paying particular attention to static electricity, electromagnetic waves, and together with the necessary anti-static measures Safety PrecautionsHarmful substances such devices include GaAs, GaAs dust and fumes are toxic, this product can not be broken, cutting or grinding, not with chemicals to dissolve.Design and Application1. in the ratings to be used within the operating LED current limit function of the resistor. How much resistance will have to refer to the specific product specifications required to calculate the rated current plus that.2. LED to be used in parallel mode, each LED channel by adding resistors are required, must not be led directly to multiple parallel.3. circuits shall be designed to note: When the LED goes out to prohibit reverse voltage.5. solder direction (electrode direction) to be orthogonal with the direction of PCB.6. high temperature will reduce its performance and reliability, please stay away from heat sources.Cleaning1. avoid the use of non-designated chemical solvents to clean the LED.For example: trichloroethene, chlorosilanes, acetone, difluoro esters.2. If necessary cleaning carried out at room temperature, and not more than 1 minute.3. When using any cleaning a chemical solvent to be especially careful, because some chemical solvents will damage the gel surface.4. recommend the use of isopropyl alcohol or pure water (not tap water) for cleaning.5. If using pure water, then immediately after cleaning dehumidifying, forced drying.Save1. before unpacking, LED should be stored in 30 ℃/ 90% RH or less environment. After opening the package, LED should be placed in 30 ℃/ 70% RH or below the environment2. effective use for 1 year, after opening in 168H (7 days) of the exhausted.3. If the use of desiccant fade or expired, the need to dry and roast: 60 ± 6℃ / 24H.4.LED James Gray lens easily, you need to do a good job related to dust control measuresPick and placeGrasping LED can only touch on the body frame, tweezers, a tool can not put pressure on the lens, not to stamp. stab or push the lens.Heat treatmentWhen the LED current drive is too large the Tj (junction temperature) will exceed its limit, which can cause serious shorten the life of LED, the heat treatment measures to effectively reduce the thermal resistance applications. More common practice is to install the LED package device PCB board in the metal matrix. 1W LED products require heat the metal substrate surface area of at least 30 C ㎡(3W products recommended above 80 C ㎡), and its thermal conductivity is higher than 2.0W/mK.LED and thermal conductivity of metal substrate by a better combination of thermal plastic, thermal requirements Coefficient is higher than 1.0W/mK. thickness of less than 100um.WarrantyAll products manufactured by WAYJUN TECHNOLOGY are under warranty regarding defective materials for a period of two years from the date of delivery to the original purchaser.CopyrightCopyright 2009, by ShenZhen Wayjun Technology Co.,Ltd. All rights are reserved. ShenZhen Wayjun Technology Co.,Ltd reserves the right to make improvements to the products described in this manual at any time without notice.TrademarkThe names used for identification only may be registered trademarks of their respective companies.Edition: V1.3Date:March 2011。
ProLight PS2P -TFPE -FMR9 0.2W Power LED 技术数据表说明书
ProLight PS2P-TFPE-FMR9 0.2W Power LED Technical Datasheet Version: 1.2Features‧High Color rendering index‧Good color uniformity‧Industry’s first lighting-class LED ‧Low Voltage DC operated‧Instant light (less than 100ns)‧No UV Main Applications‧The perfect light color for the meat counter ‧T8/T5 tube‧LED bulb‧Indoor/Outdoor Commercial and Residential ArchitecturalIntroduction‧PS2P qualifies as the JEDEC Level 1 MSL sensitivity level and suitable forSMD process, Pb_free reflow soldering capability, and full compliancewith EU Reduction of Hazardous Substances (RoHS) legislation.2016/10No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Notes:1. The cathode side of the device is denoted by the chamfer on the part body.2. Electrical insulation between the case and the board is required. Do not electrically connect either the anode or cathode to the slug.3. Drawing not to scale.4. All dimensions are in millimeters.5. Unless otherwise indicated, tolerances are ±0.10mm.6. Please do not solder the emitter by manual hand soldering, otherwise it will damage the emitter.7. Please do not use a force of over 0.3kgf impact or pressure on the lens of the LED, otherwise it will cause a catastrophic failure.*The appearance and specifications of the product may be modified for improvement without notice.2Emitter Mechanical DimensionsNo. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Radiation ColorPart Number Luminous Flux ΦV (lm)CRIPattern Emitter Minimum TypicalMinimumLambertianFresh MeatPS2P-TFPE-FMR9151990●ProLight maintains a tolerance of ±7% on flux and power measurements.●ProLight maintains a tolerance of ± 2 on CRI measurements.●Please do not drive at rated current more than 1 second without proper heat sink.Flux Characteristics at 60mA, T J = 25°C3Optical Characteristics at 60mA, T J = 25°CElectrical Characteristics at 60mA, T J = 25°CColor Forward Voltage V F (V)Thermal Resistance Min.Typ.Max.Junction to Slug (°C/ W)Fresh Meat2.93.23.550●ProLight maintains a tolerance of ±0.1V for Voltage measurements.Total included Viewing Angle Angle Radiation Color Color Temperature CCT (degrees)(degrees)Pattern Min.Typ.Max.θ0.90V2 θ1/2LambertianFresh Meat3100 K-4000 K160120●ProLight maintains a tolerance of ±5% for CCT measurements.No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Absolute Maximum RatingsParameterFresh MeatDC Forward Current (mA)70Peak Pulsed Forward Current (mA)90 (less than 1/10 duty cycle@1KHz)ESD Sensitivity> ±500V (HBM per MIL-STD-883E Method 3015.7)LED Junction Temperature 120°C Operating Board Temperature -40°C -90°Cat Maximum DC Forward Current Storage Temperature -40°C -120°C Soldering Temperature JEDEC 020c 260°CAllowable Reflow Cycles 3Reverse VoltageNot designed to be driven in reverse bias4Photometric Luminous Flux Bin StructureColorBin CodeMinimumMaximumAvailable Photometric Flux (lm)Photometric Flux (lm)Color BinsFresh MeatM21517All N11719.4AllN219.422【1】●ProLight maintains a tolerance of ±7% on flux and power measurements.●The flux bin of the product may be modified for improvement without notice.●【1】The rest of color bins are not 100% ready for order currently. Please ask for quote and order Possibility.Forward Voltage Bin StructureColorBin CodeMinimum Voltage (V)Maximum Voltage (V)Fresh MeatB 2.9 3.0D 3.0 3.1E 3.1 3.2F 3.2 3.3G 3.3 3.4H3.43.5●ProLight maintains a tolerance of ±0.1V for Voltage measurements.Note: Although several bins are outlined, product availability in a particular bin varies by production runand by product performance. Not all bins are available in all colors.No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, yxFresh MeatA24000 KA13100 KA3A4A05Color BinFresh Meat Binning Structure Graphical RepresentationNote:1. ProLight SmartBin is working to make the color bin smarter, by selecting that intelligence is infused into major A0bin with minor A1-A4 bins and processes that make assembly easilyNo. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, 6Color Spectrum, T J = 25°C1. Fresh MeatLight Output CharacteristicsRelative Light Output vs. Junction Temperature at 60mA020406080100120140160020406080100120R e l a t i v e L i g h t O u t p u t (%)Junction Temperature, T J (℃)Fresh Meat0.00.20.40.60.81.0350400450500550600650700750800850900R e l a t i v e S p e c t r a l P o w e r D i s t r i b u t i o nWavelength (nm)Standard Eye Response CurveFresh MeatNo. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Forward Current Characteristics, T J = 25°C0.00.20.40.60.81.01.21020304050607080R e l a t i v e L u m i n o u s F l u xForward Current (mA)70102030405060708012345A v e r a g e F o r w a r d C u r r e n t (m A )Forward Voltage (V)010203040506070800255075100125150F o r w a r d C u r r e n t (m A )Ambient Temperature (℃)R θJ-A = 150°C/W R θJ-A = 125°C/W R θJ-A = 75°C/WR θJ-A = 100°C/W Ambient Temperature vs. Maximum Forward Current1. Fresh Meat (T JMAX = 120°C)No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Typical Representative Spatial Radiation PatternLambertian Radiation Pattern0102030405060708090100-100-80-60-40-2020406080100R e l a t i v e I n t e n s i t y (%)Angular Displacement (Degrees)8Soak RequirementsLevel Floor Life Standard Accelerated Environment Time Conditions Time (hours)Conditions Time (hours)Conditions1Unlimited≤30°C /168 +5/-085°C /NA NA 85% RH85% RH●The standard soak time includes a default value of 24 hours for semiconductor manufature'sexposure time (MET) between bake and bag and includes the maximum time allowed out ofthe bag at the distributor's facility.●Table below presents the moisture sensitivity level definitions per IPC/JEDEC's J-STD-020C.Soak Requirements Level Floor Life Standard Accelerated Environment Time Conditions Time (hours)Conditions Time (hours)Conditions1Unlimited≤30°C /168 +5/-085°C /NA NA 85% RH85% RH2 1 year≤30°C /168 +5/-085°C /NA NA 60% RH60% RH2a 4 weeks≤30°C /696 +5/-030°C /120 +1/-060°C / 60% RH60% RH60% RH3168 hours≤30°C /192 +5/-030°C /40 +1/-060°C / 60% RH60% RH60% RH472 hours≤30°C /96 +2/-030°C /20 +0.5/-060°C / 60% RH60% RH60% RH548 hours≤30°C /72 +2/-030°C /15 +0.5/-060°C / 60% RH60% RH60% RH5a24 hours≤30°C /48 +2/-030°C /10 +0.5/-060°C / 60% RH60% RH60% RH6Time on Label≤30°C / Time on Label30°C /NA NA (TOL)60% RH(TOL)60% RHMoisture Sensitivity Level -JEDEC Level 1No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,9No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Stress TestStress Conditions Stress Duration Failure CriteriaRoom Temperature 25°C, I F = max DC (Note 1)1000 hours Note 2Operating Life (RTOL)Wet High Temperature 85°C/60%RH, I F = max DC (Note 1)1000 hours Note 2Operating Life (WHTOL)Wet High Temperature 85°C/85%RH, non-operating1000 hours Note 2Storage Life (WHTSL)High Temperature 110°C, non-operating 1000 hours Note 2Storage Life (HTSL)Low Temperature -40°C, non-operating 1000 hours Note 2Storage Life (LTSL)Non-operating-40°C to 120°C, 30 min. dwell,200 cyclesNote 2Temperature Cycle (TMCL)<5 min. transferMechanical Shock 1500 G, 0.5 msec. pulse, Note 35 shocks each 6 axis Natural Drop On concrete from 1.2 m, 3X Note 3Variable Vibration10-2000-10 Hz, log or linear sweep rate,Note 3Frequency20 G about 1 min., 1.5 mm, 3X/axisSolder Heat Resistance260°C ±5°C, 10 sec.Note 3(SHR)SolderabilitySteam age for 16 hrs., then solder dipSolder coverageat 260°C for 5 sec.on leadNotes:1. Depending on the maximum derating curve.2. Criteria for judging failureItemTest Condition Criteria for Judgement Min.Max.Forward Voltage (V F )I F = max DC --Initial Level x 1.1Luminous Flux or I F = max DC Initial Level x 0.7--Radiometric Power (ΦV )Reverse Current (I R )V R = 5V--50 μA* The test is performed after the LED is cooled down to the room temperature.3. A failure is an LED that is open or shorted.10Qualification Reliability TestingNo. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, TYPE A.11Recommended Solder Pad DesignStandard Emitter ●All dimensions are in millimeters.TYPE B.No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, 12Reflow Soldering ConditionProfile FeatureSn-Pb Eutectic Assembly Pb-Free Assembly Average Ramp-Up Rate 3°C / second max.3°C / second max.(T Smax to T P )Preheat–Temperature Min (T Smin )100°C 150°C –Temperature Max (T Smax )150°C 200°C –Time (t Smin to t Smax )60-120 seconds 60-180 seconds Time maintained above:–Temperature (T L )183°C 217°C –Time (t L )60-150 seconds60-150 secondsPeak/Classification Temperature (T P )240°C 260°C Time Within 5°C of Actual Peak 10-30 seconds 20-40 seconds Temperature (t P )Ramp-Down Rate6°C/second max.6°C/second max.Time 25°C to Peak Temperature6 minutes max.8 minutes max.●We recommend using the M705-S101-S4 solder paste from SMIC (Senju Metal Industry Co., Ltd.) for lead-free soldering.●Do not use solder pastes with post reflow flux residue>47%. (58Bi-42Sn eutectic alloy, etc) This kind of solder pastes may cause a reliability problem to LED.●All temperatures refer to topside of the package, measured on the package body surface.●Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.●Reflow soldering should not be done more than three times.●When soldering, do not put stress on the LEDs during heating.●After soldering, do not warp the circuit board.t 25°C to Peakt S PreheatTimeT e m p e r a t u r eCritical Zone T L to T PRamp-upRamp-downT SmaxT Smint Pt LT PT L25IPC-020cNotes:1. Drawing not to scale.2. All dimensions are in millimeters.3. Unless otherwise indicated, tolerances are ±0.10mm.13 No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,Notes:1. Empty component pockets sealed with top cover tape.2. 3000 pieces per reel.3. Drawing not to scale.4. All dimensions are in millimeters.14 No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,Precaution for Use●StoragePlease do not open the moisture barrier bag (MBB) more than one week. This may cause theleads of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after openingthe MBB. The recommended storage conditions are temperature 5 to 30°C and humidity lessthan 40% RH. It is also recommended to return the LEDs to the MBB and to reseal the MBB.●The slug is is not electrically neutral. Therefore, we recommend to isolate the heat sink.●We recommend using the M705-S101-S4 solder paste from SMIC (Senju Metal IndustryCo., Ltd.) for lead-free soldering.●Do not use solder pastes with post reflow flux residue>47%. (58Bi-42Sn eutectic alloy, etc) Thiskind of solder pastes may cause a reliability problem to LED.●Any mechanical force or any excess vibration shall not be accepted to apply during coolingprocess to normal temperature after soldering.●Please avoid rapid cooling after soldering.●Components should not be mounted on warped direction of PCB.●Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,a heat plate should be used. It should be confirmed beforehand whether the characteristics ofthe LEDs will or will not be damaged by repairing.●This device should not be used in any type of fluid such as water, oil, organic solvent and etc.When cleaning is required, isopropyl alcohol should be used.●When the LEDs are illuminating, operating current should be decide after considering thepackage maximum temperature.●The appearance, specifications and flux bin of the product may be modified for improvementwithout notice. Please refer to the below website for the latest datasheets./Handling of Silicone LEDsNotes for handling of silicone LEDs●Please do not use a force of over 0.3kgf impact or pressure on the silicone ,otherwise it will cause a catastrophic failure.●The LEDs should only be picked up by making contact with the sides of the LED body.●Avoid touching the silicone especially by sharp tools such as Tweezers.●Avoid leaving fingerprints on the silicone.●Please store the LEDs away from dusty areas or seal the product against dust.●When populating boards in SMT production, there are basically no restrictionsregarding the form of the pick and place nozzle, except that mechanical pressureon the silicone lens must be prevented.●Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc)15 No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,。
3W大功率MR16射灯规格书
違反產品操作規程，而引起的產品損壞，不屬於本保證範圍之內；對質量保修期內的品質問題，本公司在保修期內將選擇修復、
調換（零部件）或更換新產品等方法給予解決。超過品質保用期將適當收取材料、人工費用。
相關色溫
正白 暖白
5500-6500K 2700-3300K
顯色指數
Ra>70
出光角度（°）
30°
包裝尺寸 （mm）
53*53*52MM
燈體材質
6063鋁車件
燈體表面處理
氧化
包裝數量 （PCS）
120PCS/CTN
使用注意事項：
1、接駁電源線時，必須採取相應的防水、漏水的措施；
2、該燈具使用時不能違反任何防火法規。
規格參數：
HS-3*1W-MR16-
產品型號
CL
產品圖片
輸入電壓
AC/DC:12/24
尺寸規格 電源頻率 功率因素 LED數量 LED功耗 燈具總功耗 LED發光效率
燈具光通量
ф48*42MM 50-60Hz >0.7 3PCS 3W 3.3W 100LM/W
正 白 290-330LM
暖 白 280-320LM
維護維修說明：
1、維護維修前請確定已經斷電，請勿帶電操作；
2、定期對燈透光罩進行清潔，以保持燈具良好的透光性；
3、定期對燈的外殼灰塵進行清潔，以保持良好的散熱性能；
4、注意不要用水或者腐蝕性強的溶液進行清潔，最好用幹抹布。
售後服務：
LED射燈產品質保2個月。在正常使用條件下，品質保證是基於產品的正確保存、安裝、使用和維護；由於安裝使用不當，
深圳海欣绿色照明有限公司射燈規格書
3*1W 射燈規格書
產品特性：
2016灯珠规格书
2016灯珠规格书一、灯珠概述灯珠，又称LED灯珠，是一种采用半导体材料制成的光源。
近年来，随着LED技术的不断发展，灯珠在照明领域的应用越来越广泛，其节能、环保、寿命长等优点得到了广泛关注。
二、灯珠规格参数1.直径：灯珠的直径通常分为毫米和英寸两种单位，如3mm、5mm、10mm等。
不同直径的灯珠适用于不同的照明场景。
2.长度：灯珠的长度直接影响到照明设备的整体设计和使用场景。
常见的长度有5mm、10mm、15mm等。
3.功率：灯珠的功率决定了其能耗和照明效果。
根据功率不同，灯珠可分为低功率（0.5W以下）、中功率（0.5W-3W）和高功率（3W以上）等。
4.电压：灯珠的电压决定了其使用场景和电源选择。
常见的电压有12V、24V、36V等。
5.色温：灯珠的色温影响了照明环境的氛围和视觉效果。
常见的色温有暖白（2700-3500K）、冷白（4000-6000K）和暖黄（6000K以上）等。
6.亮度：灯珠的亮度决定了照明效果的明亮程度。
亮度单位为流明（lm），越高表示亮度越亮。
7.寿命：灯珠的寿命是指其在正常使用条件下能持续工作的时间。
一般来说，灯珠的寿命与使用寿命成正比，越高表示使用寿命越长。
三、灯珠应用领域灯珠广泛应用于家庭照明、商业照明、户外照明、交通照明、显示屏等领域。
不同领域的灯珠需求和应用场景有所不同，选购时需注意。
四、灯珠选购与使用注意事项1.选购时，要根据自己的需求选择合适的灯珠规格，如直径、长度、功率等。
2.考虑灯珠的性能，如亮度、色温、寿命等，确保照明效果和使用体验。
3.注意灯珠的电压，确保与电源匹配，避免使用过程中出现安全隐患。
4.选购正规厂家生产的灯珠，保证产品质量和售后服务。
5.使用时，要按照说明书进行安装和维护，确保灯珠的正常工作。
五、总结灯珠作为LED照明的重要组成部分，其规格和性能直接影响到照明效果和使用体验。
在选购和使用过程中，要充分考虑灯珠的各方面参数，确保达到理想的照明效果。
ProLight Phenix 3535 3W白光高功率LED技术数据表说明书
ProLight PK2N-3LWE-Bxx 3W White Power LED Technical Datasheet Version: 1.5Features‧100% foot print compatible with CreeXP-C / XP-E / XP-G‧Best thermal material solution of the world ‧Best Moisture Sensitivity:JEDEC Level 1‧Good color uniformity‧RoHS compliant Main Applications ‧Entertainment Lighting‧Commercial LightingIntroduction‧ProLight Phenix3535, is one of the smallest high power LED footprint availableby ProLight Opto, has offered extended solid-state lighting design possibilities.ProLight Phenix3535 is designed with ProLight own Patents and using copperleadframe, the best thermal material of the world.‧Phenix3535 qualifies as the JEDEC Level 1 MSL sensitivity level and suitablefor SMD process, Pb_free reflow soldering capability, and full compliance withEU Reduction of Hazardous Substances (RoHS) legislation.2016/10No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,Emitter Mechanical DimensionsNotes:1. The cathode side of the device is denoted by the chamfer on the part body.2. Electrical insulation between the case and the board is required. Do not electrically connecteither the anode or cathode to the slug.3. Drawing not to scale.4. All dimensions are in millimeters.5. Unless otherwise indicated, tolerances are ±0.10mm.6. Please do not solder the emitter by manual hand soldering, otherwise it will damage the emitter.7. Please do not use a force of over 0.3kgf impact or pressure on the lens of the LED, otherwiseit will cause a catastrophic failure.*The appearance and specifications of the product may be modified for improvement without notice.2No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, ColorPart Number Emitter Luminous Flux ΦV (lm)CRI Minimum@350mA Refer @700mAMinimum Typical Minimum Typical WhitePK2N-3LWE-BSD 12014720426470PK2N-3LWE-BR811013118723580●ProLight maintains a tolerance of ±7% on flux and power measurements.●ProLight maintains a tolerance of ±2 on CRI measurements.●Please do not drive at rated current more than 1 second without proper heat sink.3Flux Characteristics, T J = 25°COptical Characteristics at 350mA, T J = 25°CTotalincluded Viewing Angle Angle Radiation Color Color Temperature CCT (degrees)(degrees)Pattern Min.Typ.Max.θ0.90V2 θ1/2LambertianWhite5000 K7500 K10000 K160130●ProLight maintains a tolerance of ±5% for CCT measurements.Forward Voltage V F (V)Forward Voltage V F (V)Thermal Resistance @350mARefer @700mAJunction to SlugColor Min.Typ.Max.Typ.(°C/ W)White2.853.103.603.508●ProLight maintains a tolerance of ±0.1V for Voltage measurements.Electrical Characteristics, T J = 25°CElectro-Optical Characteristics, T J = 25°CI F(mA)V F(V)Power (W)PK2N-3LWE-BSD PK2N-3LWE-BR8 Flux (lm)Flux (lm)250 2.98 0.75 108.3 96.5300 3.04 0.91 128.1 114.2350 3.10 1.09 147.0 131.0400 3.15 1.26 165.3 147.3500 3.26 1.63 200.3 178.5600 3.36 2.02 232.9 207.6700 3.46 2.42 263.6 234.9800 3.55 2.84 292.7 260.8●All values are reference only.Parameter WhiteDC Forward Current (mA)800Peak Pulsed Forward Current (mA)900 (less than 1/10 duty cycle@1KHz)ESD Sensitivity±4000V (Class III)(HBM per MIL-STD-883E Method 3015.7)LED Junction Temperature120°COperating Board Temperature-40°C -90°Cat Maximum DC Forward CurrentStorage Temperature-40°C -120°CSoldering Temperature JEDEC 020c 260°CAllowable Reflow Cycles3Reverse Voltage Not designed to be driven in reverse bias Absolute Maximum RatingsNo. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,4Photometric Luminous Flux Bin Structure at 350mAColor Bin CodeMinimum Maximum Available Photometric Flux (lm)Photometric Flux (lm)Color BinsPK2N-3LWE-BSD V2120130【1】W1130140All W2140155All X1155170【1】PK2N-3LWE-BR8V1110120All V2120130All W1130140All W2140155【1】X1155170【1】●ProLight maintains a tolerance of ±7% on flux and power measurements.●The flux bin of the product may be modified for improvement without notice.●【1】The rest of color bins are not 100% ready for order currently. Please ask for quote and order possibility. Forward Voltage Bin Structure at 350mAColor Bin Code Minimum Voltage (V)Maximum Voltage (V)White A 2.85 3.10B 3.10 3.35 D 3.35 3.60●ProLight maintains a tolerance of ±0.1V for Voltage measurements.Note: Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors.5No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, 0.240.26 0.280.30 0.320.340.360.380.400.42 0.240.26 0.28 0.30 0.32 0.34 0.36 0.38yxPlanckian (BBL)White7000 K6300 K5650 K5000 KX0XPXNW0WPWNV0VN10000 KY0YA6White Binning Structure Graphical RepresentationNo. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Bin Codex y Typ. CCT (K)Bin Codex y Typ. CCT (K)V00.329 0.331 5320X00.308 0.311 66500.329 0.345 0.305 0.322 0.346 0.359 0.316 0.333 0.344 0.344 0.317 0.320 VN 0.329 0.345 5320XN 0.305 0.322 66500.329 0.357 0.303 0.333 0.347 0.372 0.315 0.344 0.346 0.359 0.316 0.333 W00.329 0.345 5970XP 0.308 0.311 66500.329 0.331 0.317 0.320 0.317 0.320 0.319 0.300 0.316 0.333 0.311 0.293 WN 0.329 0.345 5970Y00.308 0.311 80000.316 0.333 0.283 0.284 0.315 0.344 0.274 0.301 0.329 0.357 0.303 0.333 WP 0.329 0.331 5970YA 0.308 0.311 80000.329 0.320 0.311 0.293 0.318 0.310 0.290 0.270 0.3170.3200.2830.284●Tolerance on each color bin (x , y) is ±0.005Note: Although several bins are outlined, product availability in a particular bin varies by production runand by product performance. Not all bins are available in all colors.7White Bin StructureNo. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, 0.00.20.40.60.81.0350400450500550600650700750800850R e l a t i v e S p e c t r a l P o w e r D i s t r i b u t i o nWavelength (nm)Standard Eye Response CurveWhite8Color Spectrum, T J = 25°C1. WhiteLight Output CharacteristicsRelative Light Output vs. Junction Temperature at 700mA020406080100120140160020406080100120R e l a t i v e L i g h t O u t p u t (%)Junction Temperature, T J (℃)WhiteNo. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, 01002003004005006007008009000255075100125150F o r w a r d C u r r e n t (m A )Ambient Temperature (℃)R θJ-A = 30°C/W R θJ-A = 20°C/W R θJ-A = 25°C/W R θJ-A = 15°C/W010020030040050060070080090012345A v e r a g e F o r w a r d C u r r e n t (m A )Forward Voltage (V)0.00.51.01.52.02.50100200300400500600700800900R e l a t i v e L u m i n o u s F l u xForward Current (mA)Forward Current Characteristics, T J = 25°CFig 1. Forward Current vs. ForwardVoltage for White.Fig 2. Relative Luminous Flux vs.Forward Current for White at T J =25 maintained.9Ambient Temperature vs. Maximum Forward Current1. White (T JMAX = 120°C)No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, 0102030405060708090100-100-80-60-40-20020406080100R e l a t i v e I n t e n s i t y (%)Angular Displacement (Degrees)Typical Representative Spatial Radiation PatternLambertian Radiation Pattern10Soak RequirementsLevel Floor Life Standard Accelerated Environment Time Conditions Time (hours)Conditions Time (hours)Conditions1Unlimited≤30°C /168 +5/-085°C /NA NA 85% RH85% RH●The standard soak time includes a default value of 24 hours for semiconductor manufature'sexposure time (MET) between bake and bag and includes the maximum time allowed out ofthe bag at the distributor's facility.●Table below presents the moisture sensitivity level definitions per IPC/JEDEC's J-STD-020C.Soak Requirements Level Floor Life Standard Accelerated Environment Time Conditions Time (hours)Conditions Time (hours)Conditions1Unlimited≤30°C /168 +5/-085°C /NA NA 85% RH85% RH2 1 year≤30°C /168 +5/-085°C /NA NA 60% RH60% RH2a 4 weeks≤30°C /696 +5/-030°C /120 +1/-060°C / 60% RH60% RH60% RH3168 hours≤30°C /192 +5/-030°C /40 +1/-060°C / 60% RH60% RH60% RH472 hours≤30°C /96 +2/-030°C /20 +0.5/-060°C / 60% RH60% RH60% RH548 hours≤30°C /72 +2/-030°C /15 +0.5/-060°C / 60% RH60% RH60% RH5a24 hours≤30°C /48 +2/-030°C /10 +0.5/-060°C / 60% RH60% RH60% RH6Time on Label≤30°C / Time on Label30°C /NA NA (TOL)60% RH(TOL)60% RHMoisture Sensitivity Level -JEDEC Level 1No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,11Stress Test Stress ConditionsStressDurationFailure CriteriaRoom Temperature25°C, I F= max DC (Note 1)1000 hours Note 2 Operating Life (RTOL)Wet High Temperature85°C/60%RH, I F= max DC (Note 1)1000 hours Note 2 Operating Life (WHTOL)Wet High Temperature85°C/85%RH, non-operating1000 hours Note 2 Storage Life (WHTSL)High Temperature110°C, non-operating1000 hours Note 2 Storage Life (HTSL)Low Temperature-40°C, non-operating1000 hours Note 2 Storage Life (LTSL)Non-operating-40°C to 120°C, 30 min. dwell,200 cycles Note 2 Temperature Cycle (TMCL)<5 min. transferMechanical Shock 1500 G, 0.5 msec. pulse,Note 3 5 shocks each 6 axisNatural Drop On concrete from 1.2 m, 3X Note 3 Variable Vibration 10-2000-10 Hz, log or linear sweep rate,Note 3 Frequency20 G about 1 min., 1.5 mm, 3X/axisSolder Heat Resistance260°C ±5°C, 10 sec.Note 3 (SHR)Solderability Steam age for 16 hrs., then solder dip Solder coverage at 260°C for 5 sec.on leadNotes:1. Depending on the maximum derating curve.2. Criteria for judging failureItem Test Condition Criteria for Judgement Min.Max.Forward Voltage (V F)I F= max DC--Initial Level x 1.1Luminous Flux orI F= max DC Initial Level x 0.7--Radiometric Power (ΦV)Reverse Current (I R)V R= 5V--50 μA* The test is performed after the LED is cooled down to the room temperature.3. A failure is an LED that is open or shorted.Qualification Reliability TestingNo. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,12No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, TYPE A.13Recommended Solder Pad DesignStandard Emitter ●All dimensions are in millimeters.●Electrical isolation is required between Slug and Solder Pad.TYPE B.No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, 14Reflow Soldering ConditionProfile FeatureSn-Pb Eutectic Assembly Pb-Free Assembly Average Ramp-Up Rate 3°C / second max.3°C / second max.(T Smax to T P )Preheat–Temperature Min (T Smin )100°C 150°C –Temperature Max (T Smax )150°C 200°C –Time (t Smin to t Smax )60-120 seconds 60-180 seconds Time maintained above:–Temperature (T L )183°C 217°C –Time (t L )60-150 seconds60-150 secondsPeak/Classification Temperature (T P )240°C 260°C Time Within 5°C of Actual Peak 10-30 seconds 20-40 seconds Temperature (t P )Ramp-Down Rate6°C/second max.6°C/second max.Time 25°C to Peak Temperature6 minutes max.8 minutes max.●We recommend using the M705-S101-S4 solder paste from SMIC (Senju Metal Industry Co., Ltd.) for lead-free soldering.●Do not use solder pastes with post reflow flux residue>47%. (58Bi-42Sn eutectic alloy, etc) This kind of solder pastes may cause a reliability problem to LED.●All temperatures refer to topside of the package, measured on the package body surface.●Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.●Reflow soldering should not be done more than three times.●When soldering, do not put stress on the LEDs during heating.●After soldering, do not warp the circuit board.t 25°C to Peakt S PreheatTimeT e m p e r a t u r eCritical Zone T L to T PRamp-upRamp-downT SmaxT Smint Pt LT PT L25IPC-020cNotes:1. Drawing not to scale.2. All dimensions are in millimeters.3. Unless otherwise indicated, tolerances are ±0.10mm.15 No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, 16Notes:1. Empty component pockets sealed with top cover tape.2. 250, 500 and 1000 pieces per reel.3. Drawing not to scale.4. All dimensions are in millimeters.178 ± 13 ± 0.54 ± 0.5 5 ± 0.560 ± 0.513.2 ± 0.516.2 ± 0.5Φ 13.1 ± 0.5Φ 21 ± 0.5No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, 17Precaution for UseHandling of Silicone Lens LEDsNotes for handling of silicone lens LEDs●Please do not use a force of over 0.3kgf impact or pressure on the silicone lens, otherwise it will cause a catastrophic failure.●The LEDs should only be picked up by making contact with the sides of the LED body.●Avoid touching the silicone lens especially by sharp tools such as Tweezers.●Avoid leaving fingerprints on the silicone lens.●Please store the LEDs away from dusty areas or seal the product against dust.●When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the silicone lens must be prevented.●Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc)●StoragePlease do not open the moisture barrier bag (MBB) more than one week. This may cause the leads of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after opening the MBB. The recommended storage conditions are temperature 5 to 30°C and humidity less than 40% RH. It is also recommended to return the LEDs to the MBB and to reseal the MBB.●The slug is is not electrically neutral. Therefore, we recommend to isolate the heat sink.●We recommend using the M705-S101-S4 solder paste from SMIC (Senju Metal Industry Co., Ltd.) for lead-free soldering.●Do not use solder pastes with post reflow flux residue>47%. (58Bi-42Sn eutectic alloy, etc) This kind of solder pastes may cause a reliability problem to LED.●Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering.●Please avoid rapid cooling after soldering.●Components should not be mounted on warped direction of PCB.●Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,a heat plate should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.●This device should not be used in any type of fluid such as water, oil, organic solvent and etc.When cleaning is required, isopropyl alcohol should be used.●When the LEDs are illuminating, operating current should be decide after considering the package maximum temperature.●The appearance, specifications and flux bin of the product may be modified for improvement without notice. Please refer to the below website for the latest datasheets./。
LED灯珠参数lvda5050W6A21-3C00
● Customer:T e c h n i c a l D a t a S h e e t TOP View White LED (5050)For: IF= 60mAContents1. Features2. Applications3. Package outline dimension4. Absolute maximum ratings5. Electrical-optical characteristics6. Typical electro-optical characteristics curves7. Tapping specifications8. Package method9. BIN code description 10. BIN range11. Reliability test items and conditions 12. Precautions for use13. Hazard substance analysis1. Package: 5.0*5.0*1.6mm (TOP view white LED)2. Emitted Color: White3. Mono-color type4. Soldering methods: All SMT assembly methods5. Comply ROHS standard.※Applications:1. LCD back light.2. Mobile phones: LCD,3. Status indicators: Consumer & industrialelectronics.4.General use.＊1 I FP condition: pulse of 1/10 duty and 0.1ms width.※Electrical-optical characteristics(Ta=25℃)Note: 1. T olerance of luminous intensity is ±10%2.T olerance of forward voltage is ±0.05V※→Package Outline Dimension:※Typical Electro-Optical Characteristics Curves色区、色温对照表※BIN rangeLuminous intensity (tolerance is ±10%@ If=60mA):※Forward voltage (tolerance is ±0.05V@If=60mA):※Reliability test items and conditions:※Judgment criteria of failure for the reliability ·Iv: Below 50% of initial values·Vf: Over 20% of upper limit value·IR: Over 2 times of upper limit valueNote: Measurement shall be taken between 2 hours and after the test LED have been returned to normal ambient conditions after completion of each test.※ Precautions for use :1. Customer must apply the current limiting resistor in the circuit so as to drive the LEDs within therated current. Otherwise slight voltage shift maybe will cause big current change and burn out will happen.2. Also, caution should be taken not to overload the LEDs with instantaneous high voltage at theturning ON and OFF of the circuit. 3. Storage:3.1 Don’t open the moisture proof bag before ready to use the LEDs.3.2 The LEDs should be kept at 30℃ or less and 60%RH or less before opening the package. The max. storage period before opening the package is 1 year.3.3 After opening the package, the LEDs should be kept at 30℃/35%RH or less, and it shouldbe used within 7 days.3.4 If the LEDs be kept over the conditions of 3.4, baking is required before mounting. Bakingcondition as below: 60±5℃ for 12 hrs.4 Soldering condition:4.1 Manual of soldering ：The temp. of the iron should be lower than 280℃ and soldering within 3sec per solder-pad isto be observed.4.2 Pb-free solder temp. –time profileNote: a) Reflow soldering should not be done more than two times. b) Don’t put stress on the LEDs when soldering.c) Don’t warp the circuit board before it have been returned to normal ambientTemperatureTimeTimeconditions after soldering.Loaded quantity: 1000 pcs/reel※ Package Method:(unit:mm)Ver. A Page 9of 9。
1W大功率LED规格书
V
H
3.4
3.6
I
3.6
3.8
J
3.8
4.0
60
60
70
70
70
80
光通量
Φv
IF=350[mA]
80
80
90
lm
90
90
100
100
100
ห้องสมุดไป่ตู้
120
正向电压测量允许误差 ±3%
光通量测量允许误差±10%
颜色档次
(正向电：350mA, 环境温度=25℃)
B7
B8
B9
C7
C8
C9
x 0.3057 0.3175 0.3193 0.3093 0.3175 0.3300 0.3300 0.3193 0.3300 0.3455 0.3436 0.3300 0.3032 0.3160 0.3175 0.3057 0.3120 0.3300 0.3300 0.3175 0.3300 0.3461 0.3455 0.3300
向电压，在严重的情况下个别 LEDs 可能超过它能承受最大参数。
3.清洗
推荐使用酒精作为LED的清洗溶剂.。当用其他溶剂清洗前需要确定是否会损坏包装和硅胶。根据国际惯 例氟利昂不能用来作为清洗LEDs的溶剂，不要用超声波清洗LEDs，当确实需要用超声波清洗LEDs时，超声 波清洗LEDs的作用取决于例如超声波强度和相关条件等因素。在清洗之前， 需要提前试验以确定是否会给 LEDs带来任何损害.
Tc
6200K-7000k
5500-6200
色区坐标误差： ±0.01 色温误差 ：±10%
5000-5500
6200-7000