RK097 9型金属轴多联型 - alpscom
ALPS马达驱动型电位器RK168系列选型手册
金属轴 绝缘轴 旋钮操作型 中空轴
总阻值种类
总阻值 (kΩ)
电阻规律
电阻规律
操作部的种类
10
20
15A
L1 12
˃
ø6 4.5
C1
50
3B
L1 20 25 30
工作最大 电流值
旋转时 100mA 末端空转时 150mA (4.5V DC)
100
Unit:mm
轴承和支架固定标准尺寸
7
Unit:mm
旋转电位器 滑动电位器
金属轴
产品一览
电阻体数 安装方向
操作部 操作部长度 总阻值
形状
(L1)(mm)
(kΩ)
电阻规律
马达 配线端子
最小订货单位 (pcs.) 日本 出口
产品编号
图号
2联
3B
有
RK16812MG099 1
Horizontal type
平轴
25
100
200
200
4联
15A
无
RK16814MGA0K 2
适用于相互偏差
（2 联以上的音量用）
-40dB to 0dB 3dB max.
-
-70dB to -60dBɹ3dB max. -60dB to 0dBɹ2dB max
-100dB to 0dB 2dB max.
-60dB to -40dBɹ5dB max. -40dB to 0dBɹ3dB max.
轴的形状
齿轴, 平轴, 槽轴
平轴
槽轴, 平轴
槽轴
平轴
端子形状
插入式, 引线
插入式
附属开关
-
按开开关
MPU-9250 九轴产品中文说明书
3.6 SPI 时序特性.....................................................................................................................16
4 使用说明......................................................................................................................................19
3.4.1 D.C.电气特性 .........................................................................................................11
3.4.2 A.C.电气特性 .........................................................................................................12
4.13 MPU-250 I2C 通信解决方案 ..........................................................................................25
4.14 MPU-9250 SPI 通信解决方案.........................................................................................26
3.4.3 其他特性.......................................................................................................................14
车规级音响电位器RK097111091M选型规格书
9型⾦属轴多联型 RK097系列1轴⽆开关型产品编号RK097111091M电阻体数单联安装⽅向Horizontal type軸受固定⽅法螺纹固定操作部形状平轴操作部长度25mm中央定位⽆总阻值10kΩ电阻规律15A使⽤温度范围-20℃ to +70℃电性能总阻值允许差±20%额定功率0.05W最⾼使⽤电压50V AC, 10V DC剩余电阻20Ω max.绝缘电阻100MΩ min. 250V DC耐电压300V AC for 1 minute机械性能全旋转⾓度300°±5°旋转扭矩 2 to 25mN·m终端⽌挡强度0.5N·m轴推拉强度100N max.耐振性能10 to 55 to 10Hz/分, 全振幅1.5mm, X.Y.Z 3⽅向各2⼩时耐久性能操作寿命15,000 cycles最⼩订货单位(pcs.)⽇本800出⼝1,600照⽚外形图安装孔尺⼨图⾃插⼊侧看端⼦尺⼨轴承尺⼨附加零部件是附加到各产品上的零部件。
包装规格托盘包装数(pcs.)1箱/⽇本8001箱/出⼝包装1,600出⼝包装箱尺⼨(mm)373×540×207焊接条件浸焊⽅式的参考举例预热焊接⾯表⾯温度100℃ max.加热时间 2 min. max.浸焊焊接温度260±5℃ max.焊接时间5±1s焊接次数 2 time max.⼿⼯焊接⽅式的参考举例烙铁头温度350℃ max.焊接时间3s max.焊接次数 1 time表⽰本系列共通的注释。
1. 本产品⽬录中产品的颜⾊，与实物的颜⾊有所差异。
2. 附属开关可以选择单内轴型和双内轴型。
3. 请以最⼩订购单位的N(整数）倍来订货。
4. 除了产品⼀览之外，还备有丰富的可适⽤产品规格。
5. 本系列产品也可以⽤于车载。
的使⽤温度范围设定虽然⽐通常的⼤，但是请在使⽤时仔细确认正式的技术规格书。
GOST 俄罗斯认证标准目录
GOST俄罗斯标准目录GOST 6999-1968现金出纳机纸GOST 6981-1975工业硫酸亚铁（绿矾）GOST 6979-1954象棋表GOST 6967-1970自动制钉机精度标准GOST 6956-1954管螺纹矫板及板牙GOST 6943.13-1979纺织玻璃纤维材料-硬挺度的测试方法GOST 6943.12-1979纺织玻璃纤维材料-悬垂度的测试方法GOST 6943.11-1979纺织玻璃纤维材料-弯曲硬挺度的测试方法GOST 6943.10-1979纺织玻璃纤维材料-断裂强力和断裂伸长的测试方法GOST 6943.9-1979纺织玻璃纤维材料-动态抗弯性能的测试方法GOST 6943.8-1979纺织玻璃纤维材料-含水量和灼烧损失的测试方法GOST 6943.7-1979纺织玻璃纤维材料-线性尺寸、面积密度和线密度的测定方法GOST 6943.6-1979纺织玻璃纤维材料-密度和难燃性测定方法GOST 6943.5-1979纺织玻璃纤维材料-单丝断裂强度测试方法GOST 6943.4-1979纺织玻璃纤维材料-捻度和捻度平衡指数的测定方法GOST 6943.3-1979纺织玻璃纤维材料-耐磨性测试方法GOST 6943.2-1979纺织玻璃纤维材料-单丝和纤维直径的测试方法GOST 6943.1-1979纺织玻璃纤维材料-线密度测试方法GOST 6943.0-1979纺织玻璃纤维材料-验收规则GOST 6940-1974交换机用白炽灯GOST 6939-1971灌木沼泽犁GOST 6927-1974混凝土外墙装饰技术条件GOST 6926-1975不透光纸GOST 6923-1984工业用辐射温度计一般技术要求GOST 6915-1971间接测量动脉压力的指示式压力仪器GOST 6862-1971永磁合金棒GOST6861-1973彩色书写纸GOST 6860-1968带有电磁式上条机构的汽车钟技术条件GOST 6855-1973框架开榫机主要参数与规格GOST 6854-1977细木工带锯机基本参数与尺寸GOST 6851.3-1977 6MTC-22型铅酸蓄电池技术条件GOST 6851.2-1977 6MTC-9型铅酸蓄电池技术条件GOST 6851.1-1977 3MT-8型铅酸蓄电池技术条件GOST 6851.0-1977摩托车和小型摩托车用铅蓄电池一般技术条件GOST 6850-1976 16mm电影放映机类型、基本参数、技术要求GOST 6826-1978木工四面刨床基本参数与尺寸GOST 6825-1974荧光灯GOST 6810-1974糊墙纸GOST 6809-1970热模锻曲柄压力机基本参数和尺寸GOST 6808-1976空气锤精度标准GOST 6800-1954带有电磁式上条机构的汽车钟技术条件GOST 6787-1980陶瓷地砖技术条件GOST 6787-1969陶瓷地砖GOST 6766-1973剪板机精度标准GOST 6765-1975热轨三层钢板和宽钢带GOST 6756-1957辛香料咸图贡白鲑、索西瓦鲱鱼、欧洲白鲑和高白鲑（桶装）GOST 6749-1974糊墙纸原纸GOST 6746-1975电容量具一般技术条件GOST 6742-1968内封页纸GOST 6727-1980加强钢筋混凝土结构用冷拉低碳钢钢丝GOST 6724-1977拱式和桥式蒸汽空气双作用锻缸精度标准GOST 6723-1972自动切边机精度标准GOST 6722-1975工业过滤纸板GOST 6713-1975桥梁建造用低合金结构钢。
2800系列使用手册
UV-2802S
0.5、1、2、4nm
≤0.15%T 在 220nm,340 nm 处 0-200%T，-0.3-2.80A， 0-9999C（0-9999F） ±0.5%T RS-232C 串口,Centronics 并口配 Hp,Epson 兼容激光，喷墨打印机 550×400×270 580×４００×280 16kg 约 21kg
23仪器外观uv2800见图21图22样品室盖键盘液晶显示屏拉杆图21散热风扇电源插座打印口液晶对比度调节旋钮电源开关110v220v转换开关rs232串行通uv28022802s见图23图24图25液晶对比度调节旋钮液晶显示屏样品室盖拉杆键盘图23电源指示灯打印口电源开关rs232串行通讯口图24电源插座散热风扇散热孔110v220v转换开关换灯口盖板观察孔图2524仪器安装将仪器放置于水平平台上仪器应避免阳光直射远离电磁发射装置和大功率电气装置使用环境不能有尘埃腐蚀性气体和振动
UV-2800/2802/2802S 型
紫外可见分光光度计 用户使用手册
尤尼柯（上海）仪器有限公司
目 录 第一章 概述………………………………………………………………………………… １． １ 原理……………………………………………………………………………………… １． ２ 用途……………………………………………………………………………………… １． ３ 特点……………………………………………………………………………………… 第二章 主要技术指标……………………………………………………………………… ２． １ 技术指标………………………………………………………………………………… ２． ２ 随机附件………………………………………………………………………………… ２． ３ 仪器外观………………………………………………………………………………… ２． ４ 仪器安装………………………………………………………………………………… 第三章 仪器的基本操作…………………………………………………………………… ３． １ 显示屏和按键…………………………………………………………………………… ３． ２ 仪器上电………………………………………………………………………………… ３． ３ 仪器的基本操作………………………………………………………………………… ３． ３． １ 调空白………………………………………………………………………………… ３． ３． ２ 设置波长……………………………………………………………………………… ３． ３． ３ 调出， 存储， 打印实验结果………………………………………………………… ３． ４ 试验前的准备…………………………………………………………………………… 第四章 光度计模式………………………………………………………………………… ４． １ 测试方法描述…………………………………………………………………………… ４． １． １ 吸光度模式…………………………………………………………………………… ４． １． ２ 透过率模式…………………………………………………………………………… ４． １． ３ 含量 （浓度） 模式……………………………………………………………………… ４． ２ 打印实验报告…………………………………………………………………………… 第五章 定量测量…………………………………………………………………………… ５． １ 测量方法描述…………………………………………………………………………… ５． １． １ 选择浓度单位………………………………………………………………………… ５． １． ２ 选择校正方法………………………………………………………………………… ５． １． ３ 选择曲线拟合方法…………………………………………………………………… ５． １． ４ 直接输入标准曲线…………………………………………………………………… ５． １． ５ 建立标准曲线………………………………………………………………………… ５． １． ６ 定量测量……………………………………………………………………………… 第六章 光谱扫描…………………………………………………………………………… ６． １ 参数设置………………………………………………………………………………… ６． ２ 扫描模式选择…………………………………………………………………………… ６． ３ 建立基线………………………………………………………………………………… ６． ４ 扫描样品………………………………………………………………………………… ６． ５ 图谱处理………………………………………………………………………………… ６． ５． １ 改变标尺……………………………………………………………………………… ６． ５． ２ 峰谷查寻……………………………………………………………………………… ６． ５． ３ 存储， 调入， 打印扫描曲线………………………………………………………… 第七章 动力学测量………………………………………………………………………… ７． １ 参数设置………………………………………………………………………………… １ １ １ １ ２ ２ ２ ３ ５ ５ ５ ６ ８ ８ ９ １０ １２ １２ １２ １３ １３ １３ １５ １５ １５ １５ １６ １６ １６ １７ １９ ２１ ２１ ２１ ２２ ２２ ２３ ２３ ２３ ２４ ２６ ２６
DISCO公司产品系列介绍
DISCO公司產品介紹一：自動切割機什麼是自動切割機？是指被加工物的安裝及卸載作業均採用手動方式進行，只有加工工序實施自動化操作的切割機。
在有些機型上也可實施自動化位置校準作業。
但在機器內部沒有配置清洗、乾燥裝置.位置校準切割操作人員以手動方式將被加工物安裝到工作盤上。
3000系列的設備可自動實施位置校準作業。
300系列和500系列的設備，由操作人員使用顯微鏡進行切割位置對準作業。
操作人員只要按下開始按鈕，機台就可在位置校準工序識別出的切割道進行切割加工。
300系列 - Automatic Dicing Saw300系列切割機/切斷機，利用人工方式完成加工物的安裝調整及識別切割位置的校準作業，並且在設計上力求節省佔地空間，使該機型的外形結構顯得簡潔精巧。
另外，為了滿足各種加工要求，在最大加工物尺寸和加工精度等方面，均擁有種類豐富的產品群。
For 6" frameDAD321DAD322DAC351/DAD361設備概要適用ø 6"加工物的自動切割機DAD321的改良機型，産能更高追求高精度的切斷機和自動切割機最大加工物尺寸160 x 160ø6"(邊長6"方形)*1DAC351: 153 x 153 DAD361: 160 x 160適用框架2-6-1DAC351: - DAD361: 2-5, 2-6X軸可切割範圍(mm)192160192進刀速度有效範圍(mm/s)0.1 - 3000.1 - 5000.1 - 300Y軸可切割範圍(mm)162最小步進量(mm)0.00020.0001定位精度(mm)0.005以內/160(單一誤差)0.003以內/50.001以內/160(單一誤差)0.001以內/5光學尺最小分辨率(mm)-0.00005Z軸有效行程(mm)28.2(ø 2"切割刀片)32.2(ø 2"切割刀片)28.2(ø 2"切割刀片)最小移動量(mm)0.00010.000050.0001重復定位精度(mm)0.0010.0005可使用的最大切割刀片直徑(mm)ø76.2ø58(使用1.5 kW的主軸時)ø76.2θ軸最大旋轉角度(deg)380320DAC351: －DAD361: 380主軸額定功率(kW)1.5 at 30,000 min-1額定力矩(N・m)0.48轉速範圍(min-1)3,000 - 40,000設備尺寸(WxDxH)(mm)500 x 1,050 x 1,455500 x 900 x 1,600500 x 1,050 x 1,455設備重量(kg)約500約420(無變壓器)約470(有變壓器)約550*1另外需要專用夾具。
特克ト尼克功能生成器FG502的维修部件和特殊工具列表说明书
TM 9-6695-256-34P DEPARTMENT OF THE ARMY TECHNICAL MANUALDIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCEREPAIR PARTS AND SPECIAL TOOLS LISTFORFUNCTION GENERATOR, TEKTRONIX MODEL FG502(NSN 6695-01-074-7956)Current as of 5 December 1979Headquarters, Department of the Army, Washington, DC9 January 1980REPORTING OF ERRORSYou can help improve this publication by calling attention to errors and byrecommending improvements and stating your reasons for the recommendations. Yourletter or DA Form 2028, Recommended Changes to Publications, should be maileddirectly to Commander, US Army Missile Command, ATTN: DRSMI-MFM, RedstoneArsenal, AL 35809. A reply will be furnished directly to you.Paragraph PageSECTION I.INTRODUCTIONScope (11)General (21)Explanation of columns (31)Special information (45)How to locate repair parts (55)Abbreviations (66)II.REPAIR PARTS LIST (9)Functional Group Model Partgroup title No.No.6696Function Generator FG502A MIS30526/5III.NATIONAL STOCK NUMBER AND PARTNUMBER INDEX (13)iSection I. INTRODUCTION1. Scope.This manual lists spares and repair parts that are required for maintenance of the Function Generator, Tektronix Model FG502A. It authorizes the requisitioning and issue of spares and repair parts as indicated by the source and maintenance codes.2. General. This repair parts and special tools list (RPSTL) is divided into the following sections:a.Section I. Introduction.b.Section II. Repair Parts List. A list of spares and repair parts authorized for use in the performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in numeric sequence, with the parts in each group listed in figure and item number sequence. Bulk materials are listed in National Stock Number (NSN) sequence.c.Section III. NSN and Part Number Index. A list, in National Item Identification Number (NIIN) sequence, of all NSN’s appearing in the listings, followed by a list in alphameric sequence of all part numbers appearing in the listings. NSN’s and part numbers are cross-referenced to each illustration figure and item number appearance.3. Explanation of Columnsa.Illustration. This column is divided as follows:(1)Figure Number. Indicates the figure number of the illustration on which the item is shown.(2)Item Number. The number used to identifyitem called out in the illustration.b.Source, Maintenance, and Recoverability (SMR)Codes.(1)Source Code. Source codes indicate themanner of acquiring support items for maintenance, repair, or overhaul of end items. Source codes are entered in the first and second positions of the Uniform SMR Code format as follows:Code DefinitionPA -Item procured and stocked for anticipated or known usage.PB -Item procured and stocked for insurance purpose because essentiality dictates that a minimumquantity be available in the supply system.PC -Item procured and stocked and which otherwise would be coded PA except that it is deteriorativein nature.PD -Support item, excluding support equipment, procured for initial issue or outfitting and stockedonly for subsequent or additional initial issues oroutfittings. Not subject to automaticreplenishment.PE -Support equipment procured and stocked for initial issue or outfitting to specified maintenancerepair activities.PF -Support equipment which will not be stocked but which will be centrally procured on demand.1PG -Item procured and stocked to provide for sustained support for the life of the equipment. It is appliedto an item peculiar to the equipment which,because of probable discontinuance orshutdown of production facilities, would proveuneconomical to reproduce at a later time.KD -An item of a depot overhaul/repair kit and not purchased separately. Depot kit defined as a kitthat provides items required at the time ofoverhaul or repair.KF -An item of a maintenance kit and not purchased separately. Maintenance kit defined as a kit thatprovides an item that can be replaced atorganizational or intermediate levels ofmaintenance.KB -Item included in both a depot overhaul/repair kit and a maintenance kit.MO -Item to be manufactured or fabricated at organizational level.MF -Item to be manufactured or fabricated at the direct support maintenance level.MH -Item to be manufactured or fabricated at the general support maintenance level.MD -Item to be manufactured or fabricated at the depot maintenance level.AO -Item to be assembled at organizational level.AF -Item to be assembled at direct support maintenance level.AH -Item to be assembled at general supportmaintenance level.AD -Item to be assembled at depot maintenance level.XA - Item is not procured or stocked because the requirements for the item will result in thereplacement of the next higher assembly.XB -Item is not procured or stocked. If not available through salvage, requisition.XC -Installation drawing, diagram, instruction sheet, field service drawing, that is identified bymanufacturer’s part number.XD - A support item that is not stocked. When required, item will be procured through normal supplychannels.NOTECannibalization or salvage may be used as asource of supply for any items coded aboveexcept those coded XA and aircraft supportitems as restricted by AR 700-42.(2) Maintenance Code. Maintenance codesare assigned to indicate the levels of maintenance authorized to USE and REPAIR support items. The maintenance codes are entered in the third and fourth positions of the Uniform SMR Code format as follows:(a)The maintenance code entered in thethird position will indicate the lowest maintenance level authorized to remove, replace, and use the support item.The maintenance code entered in the third position will indicate one of the following levels of maintenance:2TM 9-6695-256-34PCode Application/ExplanationC -Crew or operator maintenance performed withinorganizational maintenance.O -Support item is removed, replaced, used at the organizational level.F -Support item is removed, replaced, used at thedirect support level.H -Support item is removed, replaced, used at thegeneral support level.D -Support items that are removed replaced, used atdepot, mobile depot, or specialized repair activityonly.(b)The maintenance code entered in the fourth position indicates whether the item is to be repaired and identifies the lowest maintenance level with the capability to perform complete repair (i.e., all authorized maintenance functions). This position will contain one of the following maintenance codes:Code Application/ExplanationO -The lowest maintenance level capable of complete repair of the support item is the organizationallevel.F -The lowest maintenance level capable of completerepair of the support item is the direct supportlevel.H -The lowest maintenance level capable of completerepair of the support item is the general supportlevelD -The lowest maintenance level capable of completerepair of the support item is the depot level.L -Repair restricted to (enter applicable designated specialized repair activity), Specialized RepairActivity.Z -Nonreparable. No repair is authorized.B -No repair is authorized. The item may bereconditioned by adjusting, lubricating, etc., atthe user level. No parts or special tools areprocured for the maintenance of this item.(3)Recoverability Code. Recoverability codesare assigned to support items to indicate the disposition action on unserviceable items. The recoverability code is entered in the fifth position of the Uniform SMR Code format as follows:RecoverabilityCodes DefinitionZ - Nonreparable item. When unservicable, condemn and dispose at the level indicated in position 3.O - Reparable item. When uneconomically reparable, condemn and dispose at organizational level.F -Reparable item. When uneconomically reparable,condemn and dispose at the direct support level. 3H - Reparable item. When uneconomicallyreparable, condemn and dispose at thegeneral support level.D -Reparable item. When beyond lower levelrepair capability, return to depot.Condemnation and disposal not authorizedbelow depot level.L -Reparable item. Repair, condemnation, and disposal not authorized belowdepot/specialized repair activity level.A -Item requires special handling or condemnationprocedures because of specific reasons (i.e.,precious metal content, high dollar value,critical material or hazardous material). Referto appropriate manuals/directives for specificinstructions.c.National Stock Number (NSN). Indicates the NSN assigned to the item and which will be used for requisitioning.d.Part Number. Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items.NOTEWhen a stock numbered item isrequisitioned, the item received may have adifferent part number than the part beingreplaced.e.Federal Supply Code for Manufacturer(FSCM). The FSCM is a 5-digit numeric code listed inSB 708-42 which is used to identify the manufacturer,distributor, or Government agency, etc.f.Description. Indicates the Federal item nameand, if required, a minimum description to identify theitem. The physical security classification of the item isindicated by the parenthetical entry (insert applicablephysical security classification abbreviation, e.g.,Phy Sec C1 (C)-Confidential, Phy Sec C1 (S)-Secret,Phy Sec C1 (T)-Top Secret). Items that are includedin kits and sets are listed below the name of the kit orset with the quantity of each item in the kit or setindicated in the quantity incorporated in unit column.When the part to be used differs between serialnumbers of the same model, the effective serialnumbers are shown as the last line of the description.In the Special Tools List, the initial basis of issue(BOI) appears as the last line in the entry for eachspecial tool, special Test, Measurement, andDiagnostic Equipment (TMDE), and other specialsupport equipment. When density of equipmentssupported exceeds density spread indicated in theBOI, the total authorization is increased accordingly.g.Unit of Measure (U/M). Indicates thestandard of the basic quantity of the listed item asused in performing the actual maintenance function.This measure is expressed by a two-characteralphabetical abbreviation (e.g., ea, in, pr, etc). Whenthe unit of measure differs from the unit of issue, thelowest unit of issue that will satisfy the required unitsof measure will be requisitioned.4h.Quantity Incorporated in Unit. Indicates the quantity of the item used in the breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A "V" appearing in this column in lieu of quantity indicates that no specific quantity is applicable (e.g., shims, spacers, etc).4.Special Informationa.Repair parts for components of standards sets which can be identified as existing in the supply system will be requisitioned through normal supply channels from the appropriate supply commodity manager.b.Repair parts for components of standards sets which cannot be identified as to proper supply source will be requisitioned from USAMICOM, using routing identifier B64 and furnishing as a minimum, the following as exception data.(1)Component stock number of the individual end item to be repaired.(2)Component manufacturer’s equipment model number and serial number.(3)The equipment manufacturer’s stock number as listed in the appropriate manual for the desired repair part.(4)The repair part reference designation, circuit reference, circuit symbol schematic designation, or reference number as listed in the manufacturer’s manual.(5)The technical specification of the repair part as contained in the appropriate manufacturer’s manual.(6)The title and date of the manufacturer’s manual from which the information in paragraphs a, b(3), (4), and (5) above was taken.NOTESRepair parts should not be requisitioned forplug-in boards identified in the plug- in boardexchange program, except by the depotdesignated to perform the repair. Repair ofcalibration set components, with plug-in boardassemblies or subassemblies designated asprogram exchange replacements with arecover- ability code of L, will be accomplishedby replacing the plug-in board.c.The plug-in board exchange program functionsare as follows:(1)Requisitioning instructions for initial issueplug-in boards will be provided since new instrument boards are included in the program.(2)As a plug-in board covered by the programfails, a replacement will be requisitioned. Requisitions will be submitted to Commander, US Army Missile Command, B64, Redstone Arsenal, AL 35809.(3)Simultaneously with c(2) above, thedefective board being replaced will be shipped by certified mail, return receipt requested, to the following address:Transportation OfficerAnniston Army DepotM/F Field Service StockAnniston, AL 36201When requisitioning a replacement board, the turn-in document number of the replaced board shall be cited on the requisition.5.How to Locate Repair Partsa.When NSN or reference number is unknown:(1) First. Using the table of contents,determine the assembly (functional group) within which the repair part belongs.5(2)Second. Using the repair parts listing, findthe functional group to which the repair part belongs and locate the item by description.b.When NSN or reference number is known:(1)First. Using the index of NSN’s and reference numbers, find the pertinent NSN or reference number. This index is in ascending NSN cross-referenced to the illustration figure number and item number.(2)Second. Using the repair parts listing, find the figure and item number, and locate the figure and item number in the repair parts list.6.Abbreviations. The abbreviations listed below may appear in this RPSTL:AC .................alternating currentACC ..............accordanceACCUR .........accuracyAL .................aluminumAMP ..............ampereASSY ............assemblyASTM ............American Standardfor Testing MaterielATTEN ..........attenuationAWG .............American WireGageBAN ..............bananaBLK................blackBR ................brassC ...................centigrade, calibration, cyclesper secondCAL ...............calibrateCAP ..............capacitanceCD .................codeCER...............ceramicCOAX............coaxialpositionCOND ...........conductorCONN ...........connectorCONS ...........consistingCONT............continualCOP ..............copperCOR..............corrosionCPS ..............cycles per secondCU.................cubicCUR...............currentCYL............... cylinderDB.................decibelDBL............... doubleDC ................direct currentDEG ..............degreeDET ..............detectorDIA ...............diameterDIM ...............dimensionDIV................ divisionDPDT ............double pole double throwDPL ..............deploymentELEC ............electricalEQUIPM........equipmentF ...................FahrenheitFED ..............FederalFIN ................finishFLG ..............flangeFREQ ...........frequencyFSCM ...........Federal supply code formanufacturersFT .................footGC ................gigacyclesGEN ..............generatorGHZ ..............gigahertzGPM .............gallons per minuteGRAD ...........graduationH ...................highHD ................headHYDR ...........hydraulicHZ .................hertzID ..................inside diameterIN ..................inchINCL .............inclusiveK ...................thousand (prefix)KC ................kilocyclesKG ................kilogramsKHZ ..............kilohertzKMHZ ...........thousand megahertzKV .................kilovoltsLAB boratoryLB .................poundsLG .................lengthLT..................light6M ...................thousandMA liampereMAX ..............maximumMC ................megacycles lifarads MFR...............manufacturerMG ligrams MHZ...............megahertzMIN ...............minimum, minutesML liliters limetersMOD .............modifiedMSEC liseconds MTL...............materialMV livolts liwatts NBS...............National Bureau Standards NEG...............negative NO.................number NOM..............nominal NPT...............National Pipe Thread NSN...............National stock number OA..................overallOD ................outside diameter OPER.............operatingOZ .................ounce PCS...............pieces PCT...............percent PF.................. picofarads PK..................peck PLTD............. platedPN ................. part number POS............... positivePP ..................peak-to-peakPSI ................ pounds per square inch PWR..............powerREF ...............reference REP...............repetitionREQ ..............required REQMTS.......requirements RES...............resistanceRF .................radio frequency RG.................rangeRH .................right hand RL..................reelRM ................rack mountedRMS ..............root mean squareROT ..............rotatingRPM .....................revolutions per minuteS......................singleSEC......................secondsSECT.....................sectionSERR....................serratedSHK ......................shankSNG .....................singleSPEC ...................specificationSPL......................specialSQ .....................squareSTD .....................standardSTGT ...................straightSW......................switchSWR .....................standing wave ratioSYS ......................systemTEL ......................telescopicTERM ...................terminalTHD......................threadTHERM ................thermometerTHK ......................thickTSTR ....................testerU......................unitUF ......................microfaradsUHF ......................ultra high frequencyV ......................voltsVAC ......................volts alternating current, vacuumVDC ......................volts direct currentVHF ......................very high frequencyVSWR ..................voltage standing wave ratioW ......................watts, with, widthWT ......................weight7 (8 blank)SECTION II TM 9-6695-256-34P(1) (2) (3) (4) (5) (6) (7)(8) ILLUSTRATION DESCRIPTION(a) (b) NATIONAL QTY FIG ITEM SMR STOCK PART INC NO. NO. CODE NUMBER NUMBER FSCM USABLE ON CODE U/M INUNITGROUP 6696GENERATOR, FUNCTIONFG502 80009M1S30526-5 188761 10PAFZZ 5910-00-632-2826D153F791FO 00853CAPACITOR,FIXED MICA.............................. EA 11 20PAFZZ 5910-00-774-4653281-0125-00 80009CAPACITOR.ELECTRICAL............................. EA 11 30PAFZZ 5910-00-823-1339CC22UJ150G 81349CAPACITOR, FIXED, CER.............................. EA 11 40PAFZZ 5910-00-806-0675CC22UJ510G 81349CAPACITOR, FIXED, CER.............................. EA 11 50PAFZZ 5910-00-487-8236196D104X9050HA156289CAPACITOR, FIXED, ELE.............................. EA 11 60PAFZZ 5910-01-071-7187196D105X0035HA156289CAPACITOR,FIXED, ELE............................... EA101 70PAFZZ 5910-00-577-1315281-0504-00 80009CAPACITOR, FIXED, CER.............................. EA 21 80PAFZZ 5910-00-064-9433283-0604-00 80009CAPACITOR.FIXED, MICA............................. EA 11 90PAFZZ 5910-01-058-9572CMR05F201FODR 81349CAPACITOR, FIXED,MICA............................. EA 21 100PAFZZ 5910-00-113-5499M39014/02-1350 81349CAPACITOR, FIXED, CER ............................ EA 61 110PAFZZ 5910-00-860-8525281-0611-00 80009CAPACITOR, FIXED....................................... EA 11 120PAFZZ 5910-01-043-8883CMR05E330GODR81349CAPACITOR, FIXED, MICA............................ EA 21 130PAFZZ 5910-00-368-2380 TDC106KO25FL 90201CAPACITOR.FIXED, ELE .............................. EA 41 140PAFZZ 5910-00-163-3938 DM15CD16R8D04 72136CAPACITOR.FIXED, MICA............................. EA 1CR1 150PAFZZ 5910-01-043-6897CMR05F131GODR81349CAPACITOR, FIXED, MICA............................ EA 11 160PAFZZ 5910-00-355-8928301-000Z5DO-171J72982CAPACITOR, FIXED, CER.............................. EA 11 170PAFZZ 5910-00-807-1543CC22UJ470G 81349CAPACITOR, FIXED, CER.............................. EA 11 180PAFZZ 5910-00-615-0105CC30UJ101G 81349CAPACITOR,.FIXED, CER.............................. EA 11 190PAFZZ 5910-01-066-3756283-0691-00 80009CAPACITOR,.FIXED, MICA............................ EA 11 200PAFZZ 5910-00-801-1005CC30UJ101G 18876CAPACITOR, FIXED, CER.............................. EA 11 210PAFZZ 5910-01-043-6906 290-0324-00 80009CAPACITOR, FIXED,. ELE............................. EA 21 220PAFZZ 5910-01-042-7757281-0202-00 80009CAPACITOR, VARIABLE................................ EA 11 230PAFZZ 5910-01-018-4623 C010EA/20E 80031CAPACITOR, VARIABLE, .............................. EA 11 240PAFZZ 5910-00-548-1273 281-0207-00 80009CAPACITOR.VARIABLE................................. EA 31 250PAFZZ 5910-00-932-9453 530-002 72982CAPACITOR,VARIABLE................................. EA 11 260PAFZZ 5910-00-626-36457301609 32878CAPACITOR,VARIABLE................................. EA 11 270PAFZZ 5910-01-043-7926295-0164-00 80009CAPACITOR SET, MATCH............................. EA 11 280PDFDD6695-01-086-1044670-2595-01 80009CIRCUIT CARD ASSY.................................... EA 11 290PDFDD6695-01-084-7039 670-2595-01 80009CIRCUIT CARD ASSY ................................... EA 11 300PDFDD6695-01-086-1045 670-2595-02 80009CIRCUIT CARD ASSY.................................... EA 11 310PAFZZ 5935-00-001-7558131-0955-00 80009CONNECTOR, RECEPTACLE........................ EA 31 320PAFZZ 5935-00-689-470710672091 18876CONNECTOR, RECEPTACLE ....................... EA 11 330PAFZZ 5325-00-425-5381210-0774-00 80009EYELET, METALLIC....................................... EA 11 340PAFZZ 6240-00-008-4550CM7220 71744LAMP,INCANDESCENT ................................. EA 19SECTION II TM 9-6695-256-34P(1)(2)(3)(4)(5)(6)(7)(8) ILLUSTRATION DESCRIPTION(a)(b)NATIONAL QTY FIG ITEM SMR STOCK PART INC NO.NO.CODE NUMBER NUMBER FSCM USABLE ON CODE U/M INUNIT 1350PAFZZ5962-01-010-*******-0067-0080009MICROCIRCUIT, LINEAR ..............................EA7 1360PAFZZ5962-01-043-9129156-0067-0680009MICROCIRCUIT, LINEAR...............................EA2 1370PAFZZ5961-00-325-8453152-0488-0080009RECTIFIER, SEMICONDUCTOR....................EA2 1380PAFZZ5905-00-437-0882315-0330-0080009RESISTOR......................................................EA4 1390PAFZZ5905-00-501-3719321-0442-0080009RESISTOR ....................................................EA2 1400PAFZZ5905-00-110-7620RCR07G102JS81349RESISTOR, FIXED, COMP.............................EA9 1410PAFZZ5905-00-200-9602RNC60K4021FS81349RESISTOR, FIXED, FILM ...............................EA1 1420PAFZZ5905-00-960-0099CB100501121RESISTOR, FIXED, COMP.............................EA16 1430PAFZZ5905-00-434-5068321-0289-0080009RESISTOR, FIXED, FILM................................EA8 1440PAFZZ5905-01-046-6845321-0286-0080009RESISTOR,.FIXED, FILM................................EA1 1450PAFZZ5905-00-405-7804 321-0114-0080009RESISTOR, FIXED, FILM................................EA1 1460PAFZZ5905-00-756-6460CEATO-1240F75042RESISTOR, FIXED, FILM................................EA2 1470PAFZZ5905-00-126-6683RCR07G332JS81349RESISTOR, FIXED, COMP ............................EA2 1480PAFZZ5905-00-106-1356RCR07G152JS81349RESISTOR,.FIXED, COMP.............................EA4 1490PAFZZ5905-00-234-437488511501121RESISTOR, FIXED, COMP.............................EA2 1500PAFZZ5905-01-064-9057321-0346-0080009RESISTOR, FIXED FILM.................................EA2 1530PAFZZ5905-00-270-1325RNC55K2212FS81349RESISTOR, FIXED, FILM................................EA2 1540PAFZZ5905-00-118-4560RCR07G395JS81349RESISTOR, FIXED, COMP ............................EA1 1550PAFZZ5905-00-119-8768RCR07G821JS81349RESISTOR, FIXED, COMP.............................EA2 1560PAFZZ5905-00-417-3076G320905J82101714RESISTOR, FIXED, COMP.............................EA2 1570PAFZZ5905-01-064-9048MFF18X016C1000191637RESISTOR, FIXED.FILM.................................EA4B1580PAFZZ5905-00-994-8526321-0277-0080009RESISTOR, FIXED,.FILM ...............................EA2 1590PAFZZ5905-00-114-0708RCR07G202JS81349RESISTOR, FIXED, COMP.............................EA4 1600PAFZZ5905-00-141-1183RCR07G101JS81349RESISTOR, FIXED, COMP.............................EA9 1610PAFZZ5905-00-114-5407RCR2OG271JS81349RESISTOR, FIXED, COMP.............................EA1 1620PAFZZ5905-00-961-1683EB241501121RESISTOR, FIXED, COMP.............................EA1 1630PAFZZ5905-00-111-4845RCR07G201JS81349RESISTOR,.FIXED, COMP.............................EA3 1640PAFZZ5905-00-435-1718RCR07G241JS81349RESISTOR, FIXED, COMP.............................EA1 1650PAFZZ5905-00-116-8555RCR07G153JS81349RESISTOR,.FIXED, COMP.............................EA2 1660PAFZZ5905-00-131-9729RCRO7G302JS81349RESISTOR, FIXED, COMP.............................EA3 1670PAFZZ5905-00-426-7740321-0239-0080009RESISTOR,.FIXED, FILM................................EA2 1680PAFZZ5905-00-105-7764RCRO7G222JS81349RESISTOR, FIXED, COMP.............................EA5 1690PAFZZ5905-00-136-8406RCR07G242JS81349RESISTOR, FIXED, COMP.............................EA1 1700PAFZZ5905-00-108-6922RCR20G151LJS81349RESISTOR, FIXED, COMP ...........................EA2301-0151-00 FSCM 800091710PAFZZ5905-00-436-8167301-0101-0080009RESISTOR, FIXED, COMP.............................EA2 1720PAFZZ5905-00-106-1249RCRO7G510JS81349RESISTOR, .FIXED, COMP............................EA1 1730PAFZZ5905-00-442-9356315-0240-0080009RESISTOR, FIXED, COMP.............................EA1 1740PAFZZ5905-00-477-8034308-0685-0080009RESISTOR, FIXED, WIREWOUND................EA1 1750PAFZZ5905-00-111-4736 RCR20G161JS81349RESISTOR, FIXED, COMP.............................EA 1 1760PAFZZ5905-00-120-9154RCR07G471JS81349RESISTOR, FIXED, COMP.............................EA110ILLUSTRATION DESCRIPTION(a)(b)NATIONAL QTY FIG ITEM SMR STOCK PART INC NO.NO.CODE NUMBER NUMBER FSCM USABLE ON CODE U/M INUNIT 1770PAFZZ5905-00-126-6696RCP07G751JS81349RESISTOR, FIXED, COMP.............................EA2 1780PAFZZ5905-00-485-4554RCR07G911JS81349RESISTOR, FIXED, COMP.............................EA1 1790PAFZZ5905-00-228-5506RCR07G622JS81349RESISTOR,FIXED,COMP...............................EA1 1800PAFZZ5905-00-115-8055RCR07G393JS81349RESISTOR, FIXED, COMP.............................EA1 1810PAFZZ5905-00-437-0921315-0752-*******RESISTOR,.FIXED, COMP.............................EA1 1820PAFZZ5905-00-110-0388RCR07G104JS81349RESISTOR, FIXED, COMP.............................EA1 1830PAFZZ5905-00-106-3666RCR07G103JS81349RESISTOR, FIXED, COMP.............................EA1 1840PAFZZ5905-00-121-9920RCR07G303JS81349RESISTOR, FIXED, COMP.............................EA2 1850PAFZZ5905-00-481-1330RNC55K3570FS81349RESISTOR, FIXED, FILM................................EA1 1860PAFZZ5905-00-232-3011CEATO-1542F75042RESISTOR,.FIXED, FILM................................EA2 1870PAFZZ5905-00-405-7803321-0110-0080009RESISTOR, FIXED, FILM................................EA1 1880PAFZZ5905-00-104-8363RCR07G820JS81349RESISTOR, FIXED, COMP.............................EA1 1890PAFZZ5905-00-111-1679RCR07G512JS81349RESISTOR, FIXED, COMP.............................EA6315-0512-00 FSCM 800091900PAFZZ5905-00-102-5293CB912501121RESISTOR, FIXED, COMP.............................EA2 1910PAFZZ5905-00-106-3668RCR07G220JS81349RESISTOR, FIXED, COMP.............................EA4315-0220-00 FSCM 800091920PAFZZ5905-00-135-3974RCR07G431JS81349RESISTOR, FIXED, COMP.............................EA3 1930PAFZZ5905-00-922-9925321-0260-0080009RESISTOR......................................................EA1 1940PAFZZ5905-00-437-0874315-0300-0080009RESISTOR, FIXED, COMP.............................EA1 1950PAFZZ5905-00-135-3973RCR07G221JS81349RESISTOR, FIXED, COMP.............................EA1 1960PAFZZ5905-00-119-8855RCR07G112JS81349RESISTOR, FIXED, COMP.............................EA1 1970PAFZZ5905-00-104-8368RCR07G470JS81349RESISTOR,.FIXED, COMP.............................EA3 1980PAFZZ5905-00-113-7346RCR32G470JS81349RESISTOR,.FIXED, COMP.............................EA4 1990PAFZZ5905-00-441-7816321-0192-0080009RESISTOR, FIXED, FILM................................EA1 11000PAFZZ5905-00-110-7292CEATO-1271F75042RESISTOR, FIXED, FILM................................EA1 11010PAFZZ5905-00-104-8362RCR07GL32JS81349RESISTOR, FIXED, COMP.............................EA1 11020PAFZZ5905-00-136-8431RCR07G432JS81349RESISTOR, FIXED, COMP.............................EA1 11030PAFZZ5905-00-426-7791321-0261-0080009RESISTOR, FIXED., FILM ..............................EA2 11040PAFZZ5905-01-036-9405311-1561-0080009RESISTOR, VARIABLE ..................................EA1 11050PAFZZ5905-00-119-8812RCR07G121JS81349RESISTOR,.FIXED, COMP.............................EA1 11060PAFZZ5905-01-018-5555 311-1427-0080009RESISTOR, VARIABLE ..................................EA1 11070PAFZZ5905-00-136-8405RCR07G131JS81349RESISTOR, FIXED, COMP.............................EA1 11080PAFZZ5905-01-018-301491ARIK73138RESISTOR, VARIABLE ..................................EA1 11090PAFZZ5905-01-034-3413311-1564-0080009RESISTOR, VARIABLE...................................EA1 11100PAFZZ5905-01-036-6416311-1565-0080009RESISTOR,VARIABLE ...................................EA5 11110PAFZZ5905-01-005-9598311-1175-0080009RESISTOR, VARIABLE...................................EA1 11120PAFZZ5905-01-017-320391AR10073138RESISTOR, VARIABLE...................................EA5 11130PAFZZ5905-00-910-0763311-0258-0080009RESISTOR, VARIABLE...................................EA1 11140PAFZZ5935-00-359-8912131-1003-0080009RETAINER, ELECTRICAL..............................EA1 11150PAFZZ5961-01-005-9752152-0457-*******SEMICONDUCTOR DEVICE..........................EA5 11160PAFZZ5961-00-105-7681152-0141-0280009SEMICONDOUCTOR DEVICE,.......................EA4811。
FLAMMA 吉他综合效果器FX150 说明书
www.flShenzhenFlammaInnovationCo.,Ltd
目录
注意事项-----------------------------------------------------------------------------------------------------------01 性能概述-----------------------------------------------------------------------------------------------------------02 主面板说明----------------------------------------------------------------------------------------------------03-04 接口面板说明-------------------------------------------------------------------------------------- -----------05-06 应用场景连接说明------------------------------------------------------------------------------------ --------07-12 连接吉他功放后级+吉他箱体--------------------------------------------------------------------------------07 连接全频设备 - -----------------------------------------------------------------------------------------------08 全频+非全频设备混合连接 ----------------------------------------------------------------------------------09 连接吉他音箱的INPUT - -------------------------------------------------------------------------------------10 连接吉他音箱的FXLOOP------------------------------------------------------------------------------------11 四线接法 -----------------------------------------------------------------------------------------------------12 基本操作------------------------------------------------------------------------ ------------------------------13-19 开机 ----------------------------------------------------------------------------------------------------------13 主界面--------------------------------------------------------------------------------------------------------13 编辑界面-----------------------------------------------------------------------------------------------------14 选择预置音色--------------------------------------------------------------------------------------------15-17 编辑预置音色 ------------------------------------------------------------------------------------------------18 编辑效果链顺序----------------------------------------------------------------------------------------------19 预置音色保存------------------------------------------------------------------------------------------------19 调音器-------------------------------------------------------------------- -----------------------------------------20 LOOPER乐句循环功能--------------------------------------------------------------------------------------21-22