SOWINE(舒万)葡萄酒真空储酒机
WKEes 葡萄酒储藏柜操作说明书
Operating instructions Page 8 Wine storage cabinet8Description of the applianceRange of appliance useThe appliance is suitable solely for storing wine in a domestic environment or similar. This includes, for example, use- in staff kitchenettes, bed and breakfast establish-ments,- by guests in cottages, hotels, motels and other forms of accommodation,- in catering and similar services in the wholesale trade.Use the appliance solely as is customary within a domestic envi-ronment. All other types of use are inadmissible. The appliance is not suitable for storing and cooling medicines, blood plasma, laboratory preparations or similar substances and products cov-ered by the 2007/47/EC Medical Devices Directive. Any misuse of the appliance may result in damage to or spoilage of stored goods. Furthermore, the appliance is not suitable for operation in potentially explosive atmospheres.Safety instructions and warnings• T o prevent injury or damage to the unit, the ap-pliance should be unpacked and set up by two people.• In the event that the appliance is damaged on delivery, contact the supplier immediately before connecting to the mains.• T o guarantee safe operation, ensure that the ap-pliance is set up and connected as described in these operating instructions.• Disconnect the appliance from the mains if any fault occurs. Pull out the plug, switch off or remove the fuse.• When disconnecting the appliance, pull on the plug, not on the cable.• Any repairs and work on the appliance should only be carried out by the customer service department, as unauthorised work could prove highly dangerous for the user. The same applies to changing the mains power cable.• Do not allow naked flames or ignition sources to enter the appliance. When transporting and cleaning the appliance, ensure that the refrigerant circuit is not damaged. In the event of damage, make sure that there are no ignition sources nearby and keep the room well ventilated.• Do not stand on the plinth, drawers or doors or use them to support anything else.• This appliance can be used by children of 8 years old and over, and also by persons with restricted physical, sensory or mental capacity or lack of experience and knowledge, if they are supervised or have been instructed on safe use of the appli-ance and understand the resulting risks. Children must not be allowed to play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.• Avoid prolonged skin contact with cold surfaces or chilled/frozen food. T his could cause pain, numb-ness and frostbite. In the case of prolonged skin contact, protective measures should be taken, e.g. gloves should be worn.• Do not consume food which has been stored for too long, as it could cause food poisoning.• Do not store explosives or sprays using com-bustible propellants such as butane, propane, pentane, etc. in the appliance. Electrical com-ponents might cause leaking gas to ignite. Y ou may identify such sprays by the printed contents or a flame symbol.Disposal notesThe appliance contains reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws.When disposing of the appliance, ensure that the refrigerant circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil. • Disable the appliance.• Pull out the mains plug.• Cut through the connection cable.WARNINGof suffocation due to packing material and plastic film!Do not allow children to play with packaging material.Take the packaging material to an official collec -tion point.EN-Setting up• Standard EN 378 specifies that the room in which you install3••Climate ratingeration performance.type plate.The position of the type plate is shown inthe section entitled Description of the appliance.Climate rating Room temperatureSN +10°C to +32°CN +16°C to +32°CST +16°C to +38°CT +16°C to +43°CSN-ST +10°C to +38°CSN-T +10°C to +43°CDo not operate the appliance outside thespecified room temperature range.Electrical connectionOnly operate the appliance with alternating current (AC).The permissible voltage and frequency are indicated on the typeplate. The position of the type plate is shown in the section entitledDescription of the appliance.The socket must be properly earthed and protected by a fuse.The tripping current of the fuse must be between 10 A and 16 A.sion cable or extension socket.age to the electronic control system!• Do not use electrical appliances inside the ap-pliance.• The appliance is designed for use in enclosedareas. Do not operate the appliance outdoors orin areas where it is exposed to splash water ordamp conditions.• The LED light strip illuminates the interior of theappliance. It is not suitable for lighting a room.• When transporting or operating the appliance atan altitude of more than 1500 m above sea level,the glass pane in the door can break due to thereduction in air pressure. Broken fragments aresharp-edged and can cause serious injury.EPREL databaseAs from 1 March 2021, information about energy labelling andecodesign requirements will be available in the European productdatabase (EPREL). You can access the product database usingthe following link: https://eprel.ec.europa.eu/. You will be askedto enter the model identifier. You will find the model identifier onthe type plate.91.2.3. Installation dimensions (mm)11EN(1) On/Off button(2) T emperature setting buttons (3) Interior light On/Off button (4) Audible warning On/Off button (5) Fan button(6) T emperature displaySymbols in the displayAlarm (symbol flashes if the temperature inside the appli-ance is too high or too low)Demo mode is activatedSetup mode is activated (activating the child lock and adjusting the display brightness The interior fan runs constantly Child lock is activatedThe interior light is switched on constantlySetting the temperatureReducing the temperature Press the Down button.Increasing the temperature Press the Up button.- When pressing one of the buttons for the first time, the display will start to flash.- Pressing this button again enables you to change the temperature setting.- The electronic control system will switch over automatically about 5 seconds after the last time you pressed the button, and the actual temperature will be displayed.The temperature can be set at between +5°C and +20°C.Operating and control elementsThe electronic control panel has the new "touch capacitance technology ". Any function can be activated by touching the corresponding icon.The exact contact point isSwitching the appliance on and offSwitching the appliance onPress the On/Off button until the temperature display lights up.Switching the appliance offKeep the On/Off button pressed for approx. 3 secondsso that the temperature display goes out.Storing wineIf you are storing wine for long periods of time, it should be stored at a temperature of between 10°C and 14°C. The following drinking temperatures are recommended for the various types of wine.Red wines: +14°C to +18°C Rosé wines: +10°C to +12°C White wines: +8°C to +12°CSparkling wines, Prosecco: +7°C to +9°C Champagne: +5°C to +7°CDoor open alarmIf the door is left open for more than 60 seconds, the audible warning signal will sound.If the door must be opened for a lengthy period to place items into the appliance, cancel the audible warning signal by pressing the Alarm button. The alarm switches back to standby when the door is shut.Temperature alarmIf the temperatures in the interior are out of the permitted range, the audible warning signal will sound and the temperature display will flash.• Cancel the audible warning signal by pressing the Alarm button. The temperature display will stop flashing as soon as the tem -perature in the interior has reached the set value.Temperature alarm after a fault in the applianceIf the appliance develops a fault, the temperature in the interior may rise too high or fall too low. The audible warning signal will sound and the temperature display will flash.• Cancel the audible warning signal by pressing the Alarm button. If the temperature displayed is too high (warm), first check whether the door is closed correctly.If the temperature display continues to show a value that is too high or too low after one hour, contact the customer service department.If F1 appears in the display, the appliance has suffered a fault. In this case, contact the customer service department.FanThe interior fan ensures a constant and even interior temperature and a suitable climate for wine storage.When activating the Ventilation button, the humid-ity in the appliance is further increased, which has a particularly positive effect for long-term storage. The increased level of humidity prevents the corks from drying out.NoteIf the appliance is operated in a low ambient temperature, the fan may also run when the fan function is deactivated.12Storage diagramisDisplay =Display =Display =13ENShutting your appliance downIf your appliance is to be shut down for any length of time, switch it off and disconnect the plug or switch off or unscrew the fuse. Clean the appliance and leave the door open in order to prevent unpleasant smells.The appliance complies with the relevant safety regulations and EU Directives 2014/30/EU and 2014/35/EU.Interior lightThe interior light will always switch on when the appliance door is opened.Press the Light• Press the Light Importantstaff.If the cover is removed, do not look directly at the light through optical lenses from close distance. This can dam -age your eyes.Air exchange with activated charcoal filterThe way in which wines continue to mature depends on the ambient conditions. The quality of the air is therefore decisive for preserv-ing the wine. We recommend that you replace the illustrated filter Take the filter by and remove.Saving energy- Always ensure good ventilation. Do not cover ventilation open-ings or grille.- Always keep fan louvres clear.- Do not place appliance in areas of direct sunlight or next to a stove, heater or similar object.- The energy consumption depends on the installation conditions, e.g. the ambient temperature.- Keep the time the appliance is open to a minimum.CleaningBefore cleaning, always switch off the appliance. Disconnect from the mains or switch off or unscrew the fuse.• Clean the inside and outer walls with lukewarm water and a lit-tle detergent. Do not use abrasive or acid cleaners or chemical solvents.risk of injury and damage.t rical – The appliance has suffered a fault. Contact the customer service department.You may be able to rectify the following faults by checking the possible causes yourself.• Appliance does not function:– Is the appliance switched on?– Is the plug correctly fitted in the mains socket?– Is the fuse intact?• When inserting the mains plug, the refrigeration unit does not switch on, but a value is shown in the temperature display.– Demo mode is activated. Contact the customer service depart-ment.• Loud running noise:– Is the appliance set up firmly on the floor?– Does the appliance cause nearby items of furniture or objects to vibrate? Please note that noises caused by the refrigerant circuit cannot be avoided.• The temperature is not low enough:– Is the temperature setting correct (see "Setting the temperature")?– D oes the separately installed thermometer show the correct reading?– I s the ventilation system working properly?– I (1)LightingClass 1Light sourceThis product contains a light source that meets energy efficiency rating GLED 1The appliance may contain light sources with different energy efficiency classes. The lowest energy efficiency class is indicated.*708117901* Liebherr Hausgeräte Lienz GmbHDr.-Hans-Liebherr-Strasse 1A-9900 LienzÖsterreich。
比士亚WKSL系列酒窖空调操作使用手册
比士亚WKSL系列操作使用手册（适用于中国）感谢您选用比士亚酒窖专用制冷系统。
相信我们的产品是市场上最好的，能够使用许多年都不会出现故障，是目前酒窖制冷系统中最稳定的系统。
型号序列号安装人员日期联系方式编写精确的安装指南我们花了巨大的努力，但每个具体的储酒设施有其具体的情况，因此并不保证比士亚的设备都能达到合适的制冷状态。
需要告诫用户的是：储酒设施的建造、设备的摆放位置以及其他许多因素都会影响到设备的运行和表现。
因此设备对于具体的储酒设施来讲是否合适，是由用户决定的，比士亚对此不做保证。
如果安装在建造得当的储酒空间内，比士亚系统制冷系统提供7至18摄氏度之间连续的温度选择，同时保持50-75%的相对湿度。
比士亚的设计是降低温度的同时仅除去多余水分。
在建造得当的储酒设施内制冷过程会提高相对湿度。
设备并不会进行自动加湿，也没有加热系统提升设施内的温度。
比士亚分体式系列不适合那些经常频繁开关、温度要求更低的冷饮柜提供制冷。
比士亚分体式带有电子恒温器，增加了额外的安全保护和调节方便功能：1.绿色LED显示,字体大，易读。
2.精确，易于调节（不需要额外工具）。
3.断电保护，可在断电后延迟设备的启动(一般为10-15分钟)。
4.气流阻塞保护，可在冷凝器发生阻塞引起高温时自动关闭设备，保护红酒。
5.借助储酒设施的空气感应器或可选的瓶装温控器控制温度。
比士亚WKSL系列制冷系统，分室内机与室外机方式、而不是一体机的方式进行发货。
只有经过有资质的制冷技术工人正确安装各部件、进行耐压测试、抽真空、填充制冷剂、测试安装性能以后，才能称之为一套制冷系统。
正是基于这个原因，比士亚只能对WKSL零部件的质量做保证。
技工要保证正确安装和正常运行。
安装之前，购买者和安装者应仔细阅读附于文后的有限保修条款。
储酒设施建造为了使用下面的尺寸参考，储酒设施必须至少按照如下的要求进行建造。
如果不能达到如下最低要求，请咨询经销商协助选择正确的设备。
啤酒葡萄酒生产设备硬件工艺参数
过滤槽滤板采用机制筛滤板,材质304不锈钢
内桶壁材质2mm，材质316L不锈钢
槽底壁材质厚2.5mm，材质316L不锈钢
过滤槽底有Pt100温度探头，温度范围0～150℃
保温层外包板材质厚1.5 mm，不锈钢镜面板
保温层聚氨酯,厚度75mm
发酵罐的底部物料进出管装有补风装置（生产果酒、果醋需要），罐体装有冷水降温夹套及热水升温夹套。
4只
秦皇岛源道科技开发有限公司
4★
麦芽粉碎机
200Kg/h
对辊式、粗细粉碎度灵活可调、电机功率：1.5KW电源：380V,50HZ
1套
5★
麦汁泵
1t/h
材质及加工工艺：全部氩气保护焊，用SUS304不锈钢精加工而成；电机功率：0.75KW，流量：1T/小时扬程：15米。叶轮直径：110mm。
1台
17
去核打浆机
300kg/h
筛网根据核的大小可调，机体全部由304不锈钢制造，门盖二级安全保护，可组合在生产线，也可单机生产。能够实现汁、渣分离。
1台
18
液体定量灌装机
1000瓶/h
1000瓶/h与物料接触部分均采用SUS304不锈钢加工制作，适用于各种瓶型，瓶子高度60-300毫米，定量准确，手动放置瓶子
加热能力每分钟升温0.5～1.0℃，
带烟道，带取样口
带搅拌，电机功率0.55KW380V50Hz
搅拌转速40-60rpm
古典样式，冷轧椭圆型上封头，美观无清洗死角
设备便于人工操作和手工清洗。
外形参考尺寸Ф720×1850
1只
秦皇岛源道科技开发有限公司
Wine Guardian 分体式管道酒窖制冷系统安装、运行和维护指南说明书
分体式管道酒窖制冷系统安装、运行和维护指南型号 DS025、DS050、DS088, DS200（60Hz）型号WGS40、WGS75、WGS100, WGS175（50Hz）制造商：Wine Guardian 保留自行更改本文件内容的权利，恕不另行通知。
了解最新版Wine Guardian 手册或其他文档，请浏览本公司网站。
Wine Guardian 为Air Innovations 有限责任公司的注册商标（注册资本：2 972 262）冷凝装置专利编号U.S. D791295（美国），EU 003189349-0001（欧盟）版本 04-2021© Air Innovations, 2021部件编号 15H0183-00 Rev AContents术语表 (8)Wine Guardian 装置的接收、检查与开箱 (10)检查装箱单以确认： (10)检查风机盘管装置： (11)检查冷凝装置： (11)概述 (12)Wine Guardian 分体管道系统包括 (12)电气控制 (14)冷凝装置 (14)配件和可选设备 (16)管道套环和软性管道 (16)延长压缩机保修 (16)加热盘管 (16)加湿器 (16)冷凝装置尺寸 (21)系统的制冷图 (24)冷凝装置放大图 (25)安全性 (40)安全信息规范 (40)危险 (40)警告 (40)注意 (40)上锁/挂牌程序。
(42)安全相关注意事项 (42)安全隐患 (42)触电危险 (42)高温部件危害 (42)移动部件危害 (42)装置安全联锁 (44)主电源开关 (44)安装 (47)安装前测试 (47)规划安装 (50)规划过程中须解决的事项 (50)执行安装前检查 (50)安装风机盘管装置 (52)备注：安装装置之前，请首先参考后续页面的图 1 至图 4 (52)落地式安装 (52)壁挂式安装 (52)吊顶式安装 (53)典型的安装布置 (53)装卸与安装 (53)落地式安装 (54)吊顶式安装 (54)同一面墙上的可选管道系统连接 (56)安装管道系统和格栅 (58)管道套环 (58)备注：每个管道布线（包括送风和回风）总长度不得超出 25 英尺（7.62 米）。
Alfa Laval酵酒设备说明书
Tradition and innovationCraft brewing is a unique combination of tradition, passion and innovation. Firmly rooted in centuries-old techniques, brewers around the world continueto explore new flavors and create novel interpretations of classic recipes.At Alfa Laval we have a long history of supplying process equipment to both small local producers and global breweries. We help you realize your visionswith solutions that bring out the best in your beer and brewery. We listen toyour needs and support you with all our experience and process know-howto maximize product quality, reduce your environmental impact and optimize production.We always commit 100% to our performance guarantees. Our global service organisation covers more than 100 countries, and is always ready to assistwhen you need us.We would gladly discuss the possibilities in your brewery and showyou how we can help you reach your goals. Please contact us atINGREDIENTS COLD BLOCKBREWING Each brewery is unique. And so is each brew master. That is why we don’t offer any one-size-fits-all, out-of-the-box solutions. Before making any suggestions we always listen carefully to your requirements, goals and ambitions – and prefer-ably have a taste of one or two of your beers.PACKAGINGAldox MiniModule for producing high-quality deaerated water for breweries. Use deaerated water in your brewing process to:• Maximize beer flavor stability and shelf life.• Increase yield by pushing out all beer lines.• Adjust/correct the final beer Plato.Dimensions (LxWxH):1,700 x 850 x 6,200 mm(67 x 33½ x 244 in.)Capacity: 10-40 hl/h (4.4-17.6 gpm) 02 in water: 10-20 ppb 325146IWS (Intelligent Whirlpool System)Whirlpool optimization system where trub is dried in a decanter centrifuge. The system cuts energy and water consumption, minimizes fouling/clog-ging in the wort cooler, reduces the amount of trub in fermenters and cuts whirlpool time. Higher hop utilization from counter-current flushing of solids in the decanter. Suitable for brew sizes larger than 50 hl (43 bbl).Dimensions (LxWxH):Decanter – 2150 x 580 x 890 mm (84¾ x 23 x 35 in.)Module – 1600 x 1220 x 2250 mm (63 x 48 x 88½ in.)Wort recovery: 99% of present losses Time savings: 10-20% shorter whirl-pool time3-in-1 Yeast Propagation ModuleYeast handling system that lets you rehydrate, propagate, store and re-use yeast strains. The system is based on our extensive experience from yeast management and can be fully tailored to your needs.Dimensions (LxWxH):2,000 x 2,000 x 3,100 mm (78¾ x 78¾ x 122 in.)Yeast concentration:100-150 Mcells/mlPropagation time: 48-96 hrs Batch sizes: from 5 hl (4.3 bbl) Iso-Mix Mini Rotary jet mixer for fermentation tanks or fast blending of liquid, powder and gas.• Improves tank homogenization.• Ideal for adjustment in BBT or soft drink preparation.• Mobile unit that can be moved between tanks. Dimensions (LxWxH): 2,000 x 1,050 x 2,000 mm (78¾ x 41½ x 78¾ in.) Process time: 2 hours for 50 hl (43 bbl) soda batch. Up to 40% faster fermentation.Lowal de-alcoholizer Module for dealcoholization of beer and generation of reverse osmosis (RO) water.• Removes alcohol and water from your beer with a minimum loss of flavors.• Make low-alcohol beer (below 0.5% v/v) with ease.• Cold process.• Suitable for RO water generation, so you get full control of your brewing water. Dimensions (LxWxH): 3,000 x 2,000 x 2,000 mm (118 x 78¾ x 78¾ in.) Production capacity (final alc. v/v <0.5%): 5 hl (4.3 bbl) in 6 hrs 15 hl (12.8 bbl) in 18hrs Batch sizes: 5/20/40 hl (4.3/17/34 bbl)Carboset Mini Automatic inline carbonation module for precise CO 2 injection in your beers.• Equalizes CO 2 concentration in your batches.• N 2 available on request.• Efficient, sanitary system that is easy to clean.• Carboblend option: adjust your alcohol/Plato content with deaerated water.• Store several recipes in the unit with individual settings for different beers. Dimensions (LxWxH): 1,600 x 500 x 2,000 mm(63 x 19¾ x 78¾ in.)Flow rate: 5-30 hl/h (2.2-13.2 gpm) CO 2 at outlet: 4-6 g/l798Centrifugal separatorsIntroducing a centrifugal separator in your brewing process brings benefits such as:• Higher production capacity without having to expand fermenting capacity.• Clarifying beer when the flavor profile is just right.• Reduce losses by up to 15% by separating out beer from the tank bottoms instead of draining it away. Alfa Laval offers these plug-and-play separation modules:Brew 20 SeparatorTop-fed axial-hermetic clarifier.Dimensions (LxWxH):945 x 1,750 x 1,630 mm(373/16 x 687/8 x 643/16 in.)Flow rate: 4-15 hl/h (3-19 bbl/h) Max O 2 pick-up: <10 ppbBrew 80 SeparatorTop-fed axial-hermetic clarifier.Dimensions (LxWxH):1,815 x 975 x 1,545 mm(71½ x 38½ x 61 in.)Flow rate: 10-50 hl/h (8-40 bbl/h) Max O 2 pick-up: <10 ppbBrew 250 SeparatorSmallest center-to-center inlet-outlet polishing separator. Fully hermetic machine with low power consump-tion. Gentle product treatment and low temperature pick-up.Dimensions (LxWxH):1,764 x 2,020 x 2,030 mm (69½ x 79½ x 80 in.)Flow rate: 40-140 hl/h (35-120 bbl/h) Max O 2 pick-up: <5 ppbAll units feature large spaces for solids handling (IPA friendly). No need for deaerated water or CO 2 to keep O 2 levels low.BSF Mini (Beer Sterile Filtration)Beer sterile filtration module with 100% bacteria retention without thermal degradation. The gentle treatment guarantees taste is not affected in any way. For maximum safety, each membrane cartridge is certified and the system performs an integrity check before processing a batch.There is no need for a buffer tank, meaning the footprint is small. An extra, standalone CIP module is available.Dimensions (LxWxH): 1,200 x 800 x 1,600 mm (47¼ x 31½ x 63 in.) Capacity: 0-30 hl/h (0-13.2 gpm)Flexitherm Mini Automatic pasteurization module designed to preserve your beer’s quality.• Regulates and pasteurizes variable flows.• Inactivates all bacteria and remaining yeast cells that risk spoiling your beer.• No CO 2 breakup during high temperature stage.• Hygienic and compact design with stand alone PLC.• Store several recipes in the unit with individual settings for different beers. Dimensions (LxWxH): 4,000 x 2,000 x 2,000 mm (157½ x 78¾ x 78¾ in.) Capacity: 5-15 hl/h (2.2-6.6 gpm)。
葡萄酒设备
葡萄酒设备
葡萄酒设备是一种用于酿造葡萄酒的设备，它可以帮助葡萄酒酿造者更好地控
制葡萄酒的酿造过程，从而获得更好的葡萄酒质量。
葡萄酒设备主要包括葡萄酒酿造设备、葡萄酒灌装设备、葡萄酒瓶装设备、葡
萄酒标签设备、葡萄酒储存设备等。
葡萄酒酿造设备主要用于控制葡萄酒的发酵过程，包括葡萄酒发酵罐、葡萄酒搅拌机、葡萄酒滤清机等。
葡萄酒灌装设备主要用于将葡萄酒从发酵罐中灌装到瓶子中，包括葡萄酒灌装机、葡萄酒瓶塞机、葡萄酒瓶盖机等。
葡萄酒瓶装设备主要用于将葡萄酒装入瓶子中，包括葡萄酒瓶装机、葡萄酒瓶塞机、葡萄酒瓶盖机等。
葡萄酒标签设备主要用于将葡萄酒标签贴在瓶子上，包括葡萄酒标签机、葡萄酒标签打印机等。
葡萄酒储存设备主要用于将葡萄酒储存在特定的温度和湿度条件下，包括葡萄酒储存箱、葡萄酒储存柜等。
葡萄酒设备的使用可以帮助葡萄酒酿造者更好地控制葡萄酒的酿造过程，从而
获得更好的葡萄酒质量。
此外，葡萄酒设备还可以提高葡萄酒酿造的效率，减少人工操作，提高生产效率。
总之，葡萄酒设备是一种重要的葡萄酒酿造设备，它可以帮助葡萄酒酿造者更
好地控制葡萄酒的酿造过程，从而获得更好的葡萄酒质量，提高葡萄酒酿造的效率，减少人工操作，提高生产效率。
469-名词术语-葡萄酒冷处理设备——速冻机
板 10.右端盖 11.进料口 12.出料口
1．结构与原理
图 2 刮板式蒸发器
1
速冻机主要由制冷压缩机、冷凝器、控制盘、除霜电机及蒸发器等部分组成，如 图 1 所示。速冻机采用氟制冷压缩机，制冷剂为 R22；采用强制通风冷却式冷凝器， 设有 2 个或 2 个以上轴流风机，采用卧式蒸发器。蒸发器的主要结构如图 2 所示。制冷 剂在蒸发器外筒与内筒组成的夹层中流动。当速冻机工作时，酒从进口阀进入蒸发器 内筒流动，依靠内筒壁为换热面进行冷冻，最后冷却后经阀排出。为了防止结霜，内 筒壁设有刮霜板，刮霜板随着轴转动时即可实现连续刮霜。同时为提高被冷冻物料的 流动速度，内筒中还设有折流板。折流板为圆型薄板，偏心固定于轴上。工作时，制 冷剂与待冷冻物料成逆向流动，以达到较高的换热效果。 2、操作方法
（2）打开被冷冻酒液保温罐进出口阀门，设定冷冻温度值，启动速冻机开始冷 冻酒液。
（3）当冷冻的酒液达到设定的温度值时，机器会自动停机，此时用酒泵将速冻 机内及管路内的酒液反抽回到酒罐，关闭酒罐阀门将酒管接到下一个要冷冻的酒罐 继续上述冷冻工作。
（4）机器停用时，要将机器清洗干净，积水排净，保持设备清洁卫生。 3、维护保养
（1）依据设备运行时间定期对减速传动部分进行润滑。 （2）机器运行时，保持压缩机润滑油位视镜不低于视镜的一半。 （3）一旦机器出现有渗漏现象要及时处理。 4、安全事项 （1）禁止速冻机空转，以防蒸发器内筒刮霜板磨损。 （2）每次使用结束后要彻底清洗蒸发器内壁，以减少热阻。 （3）严禁将温度设定到低于待处理酒的结冰点，防止造成机器故障。
2
葡萄酒冷处理设备——速冻机
在葡萄酒生产中，速冻机的主要作用是用于白葡萄汁低温(8℃～10℃)澄清 前的降温及葡萄酒的冷处理。
全自动酒类生产线设备一览表
全自动酒类生产线设备一览表
1. 介绍
本文档旨在提供一份全自动酒类生产线设备的详细列表。
酒类生产线设备的合理配置对于酒类生产企业的高效运营至关重要。
以下是一些常见的全自动酒类生产线设备。
2. 酿酒设备
- 发酵罐：用于酿造葡萄酒、啤酒等酒类的发酵过程。
- 酒精蒸馏塔：通过蒸馏将发酵液中的酒精分离出来，提高酒精浓度。
- 过滤器：清除酒液中的杂质和澄清酒液。
- 贮酒罐：将成品酒贮存和熟化。
3. 包装设备
- 灌装机：将成品酒灌装到瓶子或罐子中。
- 标贴机：为瓶子或罐子贴上标签，包括酒的品牌、酒的种类、酒的生产日期等信息。
- 封口机：密封酒瓶或罐子，确保酒的质量和卫生。
- 包装机：将密封好的酒瓶或罐子放入箱子或包装盒中。
4. 检测与控制设备
- 温度控制系统：用于控制酒类生产过程中的温度。
- 测量仪器：用于测量酒类的酒精浓度、酸度等参数，以确保
酒的质量。
- 自动化控制系统：对全自动酒类生产线进行集中控制和监控，提高生产效率和质量。
5. 其他设备
- 输送系统：用于将原料、半成品和成品酒从一个工序运输到
另一个工序。
- 清洗设备：用于清洗酿酒设备和包装设备，确保生产线的卫
生和安全。
以上列举的设备仅为一般全自动酒类生产线的参考，实际配置可能根据不同的生产需求而有所不同。
对于具体的酒类生产线设备配置，建议通过与专业供应商或工程师进行进一步的沟通和咨询，以确保设备的选择和配置最适合您的生产需求。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
SOWINE(舒万)葡萄酒真空储酒机
产地：法国
电压: 220V
功率: 87W
尺寸：高426mm×深245mm×宽248mm
重量：5.4公斤
最长开瓶后储存时间：10天
紅葡萄酒的适饮溫度：16℃至18℃
白葡萄酒和粉红葡萄酒的适饮温度：8℃至10℃
产品特点
* 电子自动抽真空系统,使已开瓶的葡萄酒延迟氧化,能保存多达10天,不再为未饮用完的葡萄酒保存而烦恼。
* 双独立恒温装置,确保红葡萄酒或白葡萄酒最佳品尝温度。
* 一机两用,两个独立存酒空间,每个空间都能适应不同葡萄酒存放温度的要求。
* 可放2瓶（红葡萄酒或白葡萄酒），也可以放1瓶红葡萄酒和1瓶白葡萄酒。
* 设计时尚、操作简单、轻巧便携，可灵活应用于厨房、办公室、客厅、野餐以及船上。
使用说明
一. 将未开瓶的葡萄酒调校到适饮温度
红酒
* 将未开瓶的酒瓶放于机器中, 並确保酒瓶放置于正中位置,将门关上.
* 按下"温度计"按钮一次, 以选择红酒恒温模式.
* 将相对的抽气活塞处于上升位置.
* 红色温度指示灯确认系统被设为红酒模式(16℃~18℃).
白酒/玫瑰酒
* 将未开瓶的酒瓶放于机器中, 並确保酒瓶放置于正中位置,将门关上.
* 按下"温度计"按钮两次, 以选择白酒恒温模式.
* 将相对的抽气活塞处于上升位置.
* 黄色温度指示灯确认系统被设为白酒模式(8℃~10℃).
二. 将已开瓶的葡萄酒保存
* 将已开瓶的酒瓶放于机器中, 置于开瓶状态(确保瓶颈干净,切勿用酒塞或其他物体阻塞),将门关上.
* 轻轻将抽气活塞按下至"咔"一声,抽真空系统即会自动开启.
* 按下"温度计"按钮一次以启动红酒恒温模式(16℃~18℃),或按两次以启动白酒恒温模式(8℃~10℃), 或三次以关闭恒温功能.
* 稳定显示的绿色抽气运作指示灯表示酒已保存在最佳环境中.
* 若抽气运作指示灯为红色並闪烁,请检查酒瓶是否放置正确, 及瓶颈有否异物阻塞.
* 保存已开瓶的酒时, 抽真空系统会重复启动.
* 需要取出酒瓶时, 将门打开, 抽气活塞会自动上升释放酒瓶.
常见问题解答
1.如何确定我的酒瓶保存在正确的状态？
氧气抽取装置正常运作时，绿色指示灯是稳定的。
绿色指示灯不停闪动这是正常的氧气抽取启用以改善不可避免的轻微泄漏。
2.我可以放气泡酒吗？
可以把未开封后的气泡酒保存在正确的温度。
但这不是为了保护开瓶后的气泡酒不被氧化，因这些类型的葡萄酒释放大量的二氧化碳，这是和该设备不相容的运作。
3.我可以放大的酒瓶吗？
该设备只能放入标准瓶(75cl)。
4.看不到温度显示，也无法调整?
Sowine的设计理念是易于使用和自动计算温度。
这是一個葡萄酒服务设备，它提供了红或白/粉红葡萄酒的理想温度，葡萄酒降低温度的时间太长了，尤其是白葡萄酒，葡萄酒的温度不要下降太快，避免它的味道变差。
5.抽气次数过于频繁?
抽气频繁有两种原因：一、瓶身倾斜未放正。
二、瓶口与sowine接触面有异物，需清洁瓶口与sowine接触面。