中电数码触控一体机说明书
一体机操作步骤（精选5篇）
一体机操作步骤（精选5篇）第一篇：一体机操作步骤一开机：插电源—打开开关—按启动/唤醒（绿色按钮）二、关机：关闭开关——拔掉插销三、印刷：（1）底稿展平，顶到扫描处（左边放上3张试印的纸）（2）点击制版/印刷切换按钮使制版指示灯亮（3）点击按启动/唤醒（绿色按钮）（4）制版完后，自动试印一张，按键盘上的2数字，把剩下的2张白纸印完（5）取一沓空白纸张，弄整齐，置于左边，（上把手打到最下面，下把手打到最上面）（6）数字键输入数量，点击启动/唤醒（绿色按钮）则开始印刷（7）白纸用完了，试卷数量还没达到？：根据第五步，放上白纸，点击复原按钮（黄色），这时候红灯消失，数字又出现，点击启动/唤醒（绿色按钮）继续印刷常见错误处理：（1）进纸处纸卡住，进不去，或者进去一半：下把手打下来，小心取出碎纸，把其他白纸放平，对齐，点击复原黄色按钮，点击唤醒，继续印刷（2）制版的底稿进不去：底稿没顶到头或者底稿前部不平，有窝的地方（3）机子把试卷吃了，在里面碎了：点击印筒开锁按钮，等5秒钟，关机，抽出滚筒；然后上部绿色扳手，打开制版的盖子；然后左部绿色塑料向上提，打开左侧盖子，掏出所有碎纸，把两个盖子以及筒子还原（筒子通常还原的时候如果力量不够，不能完全归为，有一点缝隙，所以要用力拥一下），开机，输入剩余数量，启动/唤醒（4）版纸盒子满了：捏住左侧黑色塑料即可拿出，清除废板纸，启动/唤醒按钮注意；（1）试卷设置：8k横向分两栏：上下左右边距：最少上2下2左2右3，制版的时候，左边的2厘米处先进：（2）反正面印刷，第一面印刷完毕，有字的向下，再放回进纸处；方向：第二面制版的时候也是卡着的，这两个方向是一样的，头部指向相同的方向（可以试印刷两张试试）（3）印刷过程多印刷5张，防止出错第二篇：创维一体机操作介绍创维一体机操作介绍一、使用管理维护1．学校要制订有关使用管理的规章制度。
2．责任至班级班主任、科任教师。
3．保持无尘书写板、一体机的清洁卫生。
触控液晶一体机使用手册- 20220425说明书
Please read this manual before useThank you for purchasing our high-end commercial touch interactive flat panel. The product have passed the rigorous testing before delivery, but incorrect usage may cause electric shock and fire. In order to ensure safety and extending the life of this product and providing the best performance of the machine, please read the following rules before using this product and observe the following safety instructions.In the event of any of the following conditions, unplug the machine from the outlet and ask qualified maintenance personnel for service:b. T he machine fell or the case is damaged.c. T here is obvious abnormality. You operateaccording to instructions, but the machinestill does not work.d.Foreign body or liquid enters the machine.e.There are unusual sounds or gas emitted.The machine has high pressure and itsinternal does not contain user-serviceableparts. In order to prevent the occurrence ofdanger, please do not open the case. If youneed maintenance, please ask qualifiedKeep the product in a well-ventilated area.Do not place the product in an too heated,cold and humid environment. Do not placeit under direct sunlight.a. T he power wire or power plug is damagedor worn out.Important safety instructions* The holes in the case are designed forventilation and cooling to ensure long-term reliable operation of the componentsinside the machine and prevent overheating.When placing the machine, it’s important topay attention to prevent plugging holes.* Do not place the product in embedded deviceunless there is a good ventilation device.* Do not place the unit on an unstable level. Prevent falling or damage.* Do not use the product where is closing water or wet basements andother similar environments.* Remember to unplug the power wire whencleaning. Please use a slightly damp soft clothgently wipe the machine lightly instead of liquidor spray cleaner and alcohol, solvents orammonia-containing liquid* Before using this machine, please read and understand all the instructions and indications and keep the user manual for future usage.* Do not use the parts which are not recommended by the manufacturer to avoid danger.* Power wire should be properly placed to avoid being trampled and objects squeezed.* Do not overload the power outlet or extend the length of power wire toavoid fire and electric shock.* All specifications in this manual and the packaging are subject to change without notice. If there is a slight difference between the manual and the actual operation, please take the actual operation as the standard.*When the power plug or appliance coupler is used as a disconnect device, the disconnect device should be easy to operate.* The machine should not suffer water dropletsor splashes. Do not place containers containingwater (or other liquids, etc.) on the product,because it may result in fire or electric shock.* The power plug should be fully inserted intothe power outlet. If it is loose may cause sparksand fire.* Do not place flammable and explosive materials near the product.* Please do not put any sharp objects, metal or liquid into or touch the signal connector or heat dissipation hole to avoid short circuit, damage product and electric shock.* Do not use the product immediately after moving it from a low temperature place to high temperature or facing the air conditioner. These may causecondensation inside the machine and malfunction.* Move the product carefully to avoid hit. It’s important to protect the screen section. In addition, if use trolley, it’s necessary to beware of the damage caused by the sudden braking, excessive force, and uneven ground.4Remote control ......................................................................145Processing methods for simple problems ..................................................16Catalogue3.10Fold .....................................................................143.8Sound .. (13)3.7Screen locked (13)3.6Whiteboard......................................................................123.5Preview source.............................................................123.4Menu (12)3.3 Recently application........................................................123.2Home (12)3.1Back (12)3Shortcut menu (11)2.6Upgrade ..................................................................112.5Restore (10)2.4Advanced (9)2.3Lock setting...............................................................82.2Backlight setting............................................................72.1Network (6)2Settings (6)1.2.8Apps (5)1.2.7Settings (4)1.2.6Browser (4)1.2.5Multi-screen (4)1.2.4Whiteboard (4)1.2.3Source (4)1.2.2File manager (3)1.2.1 Signal preview......................................................31.2Main functions.............................................................21.1.3Date-time . (2)1.1.2U disk access status................................................21.1.1Network status .. (2)1.1Status bar.................................................................11Home page . (1)6Product Specification .................................................................177Attachment List .. (23)3.9Backlight (13)1Home pageThe default page is Android home when the machine is powered on firstly. Android home is composed of status bar and function sectors.1.1Status barThe status bar, which is only displayed in home page and setting page, is composed of four parts as followed (from left to right): temperature, network Connection, USB Disk, Date-time. It’s just an information presentation area and cannot be operated.1.1.1Network status1.2Main functions1.1.3Date-Time1.1.2USB access statusIt is used to display the connection state of a wireless network or wired network. When the wired network icon is displayed , the wire network connection issuccessful , and the user can use the wired network operation. When the wireless network icon is displayed, the wireless network connection is successful, and the user can use the wireless network operation. When a network fails to connect, there is no network, and the user is not able to connect to the network.It is used to display the access status of an external USB disk. When the USB icon is displayed, there is a USB disk inserted and the USB flash window pop up. If there is no USB disk inserted, the USB disk icon wouldn’t be displayed.It is used to display the current date and time.There are 8 main function sectors: “signal preview”, “Source”, “File Manager” ,“White Board”, “ Multi-screen” “Browser”, “Settings”, and “APPS”. Select the function box to perform the function.1.2.1Signal preview1.2.2File ManagerThe preview window would display a corresponding thumbnail. Click “signal preview” to enter into the signal source.Click to enter the File Manager1.2.7Settings1.2.6Browser1.2.5Multi-screen 1.2.4White board1.2.3SourceClick to switch preview window signal source.Click the whiteboard to enter the whiteboard software application, which can be used for handwriting, drawing, and opening documents.Click to enter multi-screen applicationClick to open the browser, it can used to surf the Internet and search information.Click to enter settings application.1.2.8Apps²Select “APPS” to enter into the application section, which is used to display the installed applications. You can manage or open the apps.²Long press the app to uninstall the app or delete the data.2Settings²There are six kinds of settings,which includes “network”, “backlight”, “lock setting”, “advanced”, “upgrade” and “restore”.2.1NetworkSelect “Network” to connect the machine with wireless network or wired network in the network connection pop-up window.2.2BacklightSelect “Backlight ” to set the mode and brightness of backlight in the pop-up window.[Backlight model]There are 4 modes : “Standard”, “Custom”, “Auto”, “Energy Saver”. In the “Custom” mode,[Backlight brightness]You can set the volume and brightness of the system manually when in custom mode.2.3Lock SettingsSelect “Lock Settings” to set the “Lock Style”, “Unlock password” and “Automatic locking”.[Lock Style]²It contains 2 styles: “No”, “picture style”. Touch the icon ◄► to change the style.²The default style is “No”. The system is in sleep mode and you can rap the screen to wake the screen.²If it is set in “picture style”, the screen would play the carousel images when it is locked. The system is in sleep mode and you can rap the screen to wake the screen. [Unlock password]²Setting automatic lock screen will automatically enter the lock screen in the corresponding time.²The default six automatic locking time: no, ten minutes, 15 minutes, 30 minutes, 45 minutes, the custom time.Select “user defined” to set another period of time.The screen would be locked as settings.2.4AdvancedSelect “Advanced” to open the advanced settings pop-up window, including“Language”, “Input Method”, “Boot Channel”, “Source”“Boot OPS”,“Menu Hidden”,“System Time ”, “Wallpaper” .[Language]The default language is simplified Chinese. Touch the icon ◄►switch the language. [Input Method ]Select ◄►to switch the input language.[Boot Channel]²It is used to set the channel when the machine is powered on, including 3 options: “Android”, “Force Input Source”, “Remember Input Source”.Touch the icon ◄► to change the boot channel.²The “Boot Channel” is “Android” by default. The main page would be Android interface for the first time when you power on the machine. The“Source” isunchangeable when the “Boot Channel” is “Android”.²If the “Boot Channel” is “Force Input Source”, it would access the channel what is when you power off the machine last time. The “Source” is unchangeable.² If the “Boot Channel” is “Remember Input Source” , it would access the channel what you set. The “Source” is changeable.2.5RestoreIf you have done some improper operations, select "Restore" to restore the system to the default state.Select to check some information about the machine.2.6UpgradeClick “Upgrade”,it will show a pop-up,you can upgrade in local with Udisk3Shortcut MenuThe shortcut menu would appear if you touch the screen on the bottom and slide up, including 10 sectors: “Back”, “Home”, “APP”, “Menu”, “Source”, “White Board”, “Lock”, “Sound”, “Brightness” and “Fold”. The shortcut menu won’t be foldautomatically unless You need touch the fold icon to fold the menu.3.1Back²Click “Back” to return the last interface.²Clicking the “Back” button is invalid when the display is into computer mode.²Clicking the “Back” button is invalid when the display is into homepage.3.2Home²Click on "home " to enter the android home page.²Clicking the “Back” button is invalid when the interface is into the android homepage.3.3 The Recent AppClicking “the recent App” button to check which apps have been used recently.3.4MenuClicking “Menu” button to respond to the menu on the page, which cannot be u sed in the android interface.3.5SourceClicking “Source” button to pop-up signal source select popover.3.6WhiteboardClicking the “Whiteboard button”get into the usage of whiteboard software.3.7Screen Locked²Clicking the “Screen Locked” button, the screen will be locked.²Double-click the screen to unlock.If the lock password is set, you need to enter the correct number when unlocking .The password can be unlocked.3.8sound²Clicking the“sound”button to pop up the setting window of sound.²Slide and adjust the volume²Click on the left "sound" icon to switch to mute state3.9背光点击“背光”可调节屏幕亮暗操作Pack up3.10Clicking the “pack up” button to pack up the shortcut menu.4、Remotecontrol1Power supply: pressing this button to stand by under the boot case; pressing this button to start in standby case.2Mute switch: pressing the key once, the horn has no sound, and click again to sound on. 3Digital input key: selecting 0-9 of TV channels.4Channel back view key: it can show the TV channel that was watched before.5Channel DASH key: a TV channel with multiple digits selected by digital 0-9.6One button screen off: adjusting the screen brightness.7The ESC key of OPS.8Confirmation key: selecting confirm current status.9Direction select key: under the menu state, you can select up and down.10Return key.11Opening writing software12Volume add and subtract key13Channel add and subtract key14Page up key15Page down key16Function key of OPS17Signal source: channel selection key, switching signal source channel to select different signal sources according to the demand.18Menu key: displaying the main menu interface / returns to the upper level menu19Home key: return to Android home page.20Auto correction key (valid under VGA channel).21Reserved function key.22Function key of OPS.5、Processing methods for some simple problems.Symptom Possible factors SolutionThe LCD whiteboard displays with snowflake spots, accompanied by noise .1.Antenna connector looses and the cable damages.2.The antenna type is not appropriate.3. Antenna orientation or position is not correct .4.Weak signal.1.Check whether the antenna plug is loose and thecable is in good condition.2.Check antenna type (vhf/uhf).3.Adjust the direction and position of antenna.4.Try to use a signal enhancer.The screen has no display or sound ;the light does not shine.The power plug is loose and the power is notconnected.Check whether the power line is connected.The screen has no display or sound ;the light does not shine.The power plug is loose and the power is not connected. Check whether the power line is The signals are disturbed, such as cars, neon lights,hair dryers, etc.Do not use the hair dryer beside the machine andadjust the antenna direction to reduce theinterference.The LCD whiteboard gets ghosting.The signals are disturbed, such as cars, neon lights,hair dryers, etc.The signals are disturbed, such as cars, neon lights,hair dryers, etc.e high directional antenna2.Adjust antenna orientationDisplaying without color Too low color saturation adjustment.Enter the "image" setting to add color saturation.The LCD whiteboard displays without sound.1.Low volume.2.The sound is muted.1.Adjust the volume to the right volume.2.Press the mute button of the remote control tosound on.The computer has no display, indicating no signal input or red indicator flashing.Signal line looses or falls off.Check whether the signal connection line looses,falls off and reconnects.The computer displays with image offset、Incomplete screen、 overclocking and blurry image.1.Improper regulation2.Display mode is not correct.e the automatic adjustment function.2.Enter the "PC picture adjustment" to adjust thehorizontal or vertical position.e recommendation model .Remote control distance is short and out of control.1.Remote control receiving window is blocked withobjects2.The remote controller has low battery capacity.1.Moving objects to avoid blocking the remotecontrol receiving window.2.Replace battery.The browser cannot access the link.1.Wrong network parameter configuration2.Incorrect network connection.work service does not open.1.Ask the network administrator to get the availablenetwork IP address and other parameters.2.Check whether the network connection is normal3.Consult the network service providerOnline Play is not smooth. 1.Low bandwidth network.2.Buffering films or downloading other content atthe same time.1.Please upgrade your network bandwidth to higher bandwidth.2.Please try to change other VOD addresses to getUnsmooth images system halted failing to operate the machine.1.Too many programs running.2.The external environment (such as lightning,static) interferes with the normal work of themachine.1.Switch off the power supply and wait for 1 to 2minutes until reconnecting the power again, andthen switch on.6.Product Specification55"65"70"75"86"98"ParametersUSB ResolutionsBrightness Contrast Ratio Viewing Angle Configration LAN I/O PortDp Input Port OPTICAL Output PortHDMI Input Port VGA Input Port PC-AUDIO Input Port YPBPR Input Port Av I/O PortEARPHONE Output Port MEDIA USB(OPS extension)TOUCH-USB(OPS extension)TOUCH-USBRS232PC USB(OPS extension)HDMI 3(OPS extension)Bare dinmensions(mm)Packing dinmensions(mm)Gross weightInfraed touch-panel PanelAndroid SystemBack I/O PortFront InterfacesStructureTouch Style 3840 x 2160pixels1920x1080pixels1920 x 1080pixels3840 x 2160pixels3840 x 2160pixels3840 x 2160pixels300cd/m²(typ.)350cd/m²(typ.)400cd/m²(typ.)500cd/m²(typ.)260cd/m²(typ.)350cd/m²(typ.)1000:1(typ.)1100:1(typ.)5000:1(typ.)1120:1(typ.)1200:1(typ.)1300:1(typ.)178°(H) x 178°(V)178°(H) x 178°(V)178°(H) x 178°(V)178°(H) x 178°(V)178°(H) x 178°(V)178°(H) x 178°(V)IN x 1/ OUT x 11211MINI x 1MINI x 1/MINI x 11111111USB2.0 x 1/USB3.0 x 11276.5x780.2x93√1638x998.6x1121522.3x931.3x87.61764x1050.5x99.22245.8x1334.8x1181470 x 240 x 100049±1kg1660 x 280 x 109063±1kg1820 x 300 x 119072±1kg1950 x 290 x 127082±1kg2517 x 500 x 1670181±1kg√√√√√USB BF102.5±1kg1989x1194.2x972190 x 330 x 1400CPU：64 bit A53 / Fequency : 1.2GHZ / Cores : Quad core / DDR3 : 1GB eMMC:8GB / System Version：4.4.27.Attachment ListnameRemote ControlBatteryW ifi LineWhiteboard penOperation manualWarranty cardCertificate of qualification Num 1 1 12 1 1 1Power cord1 Wall mount bracket1。
ds-70iwmo说明书
ds-70iwmo说明书
一、开机/关机：使用100~240V交流电作为触控一体机供电电源；如果其屏幕未打开，请按遥控器或机器上的待机键。
如果您想关闭触摸一体机系统，请按遥控器或触控一体机上待机键4-5秒关闭系统，进入待机状态。
如果您想完全关闭触摸一体机，请关闭“电源开关”后，断开总电源插
二、自动关机功能：在TV或AV模式中，如果超过五分钟没有输入信号，它将自动切换至待机模式；在电脑（计算机）模式中，如果触控一体机超过五分钟没触控有工作，将自动切换至待机模式。
三、关机前保存：关机时，触摸一体机将保存图像与声音的设置。
这样，当再次打开机器时，将处于关机前的状态。
四、信号源应用注意事项：如果使用PC信号源，请按下列模式设置计算机显卡的分辨率：1920x1080@60HZ、1280x1024@60HZ、1280x720@60HZ、1024x768@60HZ、800x600@60HZ、640x480@60HZ等。
五、内置电脑开/关机：当触控一体机自带内置电脑时，要开启内置电脑，请先按机器或遥控器上的待机键开启屏幕，然后再按机器或遥控器上的PC开关键，开启内置电脑。
要关闭触控一体机前，请先使用触摸或鼠标从开始菜单中按正常电脑关机步骤关闭电脑，待电脑完全关机后，才可使用触控一体机或遥控器上的待机键关闭塌。
电视电脑触摸一体机使用说明书(内置版)
.
16
• 三、保修内容： 1.产品自购买之日起，可享受３年质保（液晶屏保修一年）。第一年为
无偿服务，免收人工费，免收更换配件费，整机配件保修一年。第二年和第
三年为有偿服务，免收人工费，只收更换配件成本费。 2.保修时，该机由客户送到购买时经销商处，由经销商统一返回工厂进
行维修。
•
3.因产品使用问题或产品超过保修期进行的换机或维修，保修服务时间
2.重新安装触摸驱动程序
.
19
很高兴您能使用我们的产品，请对 我们的工作提出您的宝贵意见！
.
20
此课件下载可自行编辑修改，此课件供参考！ 部分内容来源于网络，如有侵权请与我联系删除！
入不合适电压、雷击、高温、进水、机械损坏、摔坏、化学药物腐蚀、面板
划伤或破裂等。 ７.产品因自然因素和不可抗的自然力量如地震、洪水、泥石流、火灾、
战争等造成的损坏。
.
17
• 五、其它：
•
因各地销售政策不同，售后服务在以上政策基础上有增加或改动
的，以销售合同中售后部分相关约定条款为准。本公司保留最终解释权。
.
15
五、售后服务支持
• 尊敬的用户：
•
感谢您选用我公司的产品，我公司将按照《中华人民共和国消费
者权益保护法》的有关规定及我公司对用户的真诚承诺，凭产品保修卡及购
买时的发票，为您提供下列售后服务：
• 一、包退内容： 自购买之日起7天内，只要您不满意我们的机器，在保证机器外包和机器
外观良好无污染不影响二次销售的前提下，我们均无条件接受您的退货要求。
因非机器质量引起的退货，公司不予承担运费！ 二、包换内容：
１.自购买之日起三个月内如存在机器本身的质量问题，我公司免费对产 品进行更换并承担往返运费。
商用43寸触控一体机方案说明【模板】
商用43寸触控一体机方案说明一、产品应用触控一体机是集先进的触摸屏、工控、计算机等技术于一体，可实现公众信息查询，配以指纹仪、扫描仪、读卡器、微型打印机等外设，可实现指纹考勤、刷卡、打印等特定需求。
触摸屏有四、五线电阻屏、表面声波屏、红外屏、全息纳米触摸膜等国内外优秀触摸屏，可满足用户不同地域、场所的应用需求。
我公司研发生产的带触摸功能的广告机、交互式电子白板、触摸一体机，采用国际最先进的触摸技术，触摸精确度高，反应灵敏，结合液晶显示器优异的超大显示功能，同时集成手写功能及计算机网络技术，通过先进的多媒体制作工具，将文字，图像，动画、高清晰视频，音频，电子文件，Internet信息等多媒体资料生动地一体地展现给公众，能给观众最大的视觉冲击和前所未有的触摸感觉。
二、产品特点1.全新进口工业级液晶屏，全五金+型材外框设计，工业级烤漆工艺；2.超宽视角，高对比度、高亮度、高分辨率，画面色彩的层次感强，体现图像细节；3.16.7M色彩，色彩显示准确、丰富、逼真，响应时间短，画面无拖影；4.节能环保能耗低、发热量低，适合于长时间连续工作；5.采用灵敏度高，速度快，精度高以及超高透光率的红外触摸屏；6.触摸屏防尘，防静电，防眩光，防干扰及耐磨设计，支持多点触摸；三、基本参数四、产品尺寸规格五、产品的多功能性介绍：1、电视功能：拥有1080P全高清LCD/LED液晶显示屏幕（可适用于家庭、单位、企业……）2、电脑功能：可坐在5、10、20、30米之外上网，可以用无线键盘鼠标，无线上网，同时配有无线的手写板。
（可适用于家庭、单位、工厂、公司）3、触摸功能：配备全球最先进的第六代全新红外触摸屏---流畅的触摸体验！4、卡拉OK功能: 拥有KTV点唱功能，即点即唱，娱乐方便。
（适用于家庭或单位聚会）5、免费可视电话功能：可以接入光纤宽带进行视屏电话，无论国内国外，省内省外，本地外地，无需昂贵的电话费用。
（适用于家庭、企业、公共场所）6、电玩功能：可以当一部电玩，可接入手柄、方向盘、摇杆、跳舞毯，进行赛车、射击、斗地主、魔兽世界、梦幻西游、三国演义等电子游戏。
一体机使用说明书
用户使用说明书感谢您使用此多媒体终端！为方便您正确安全的使用和操作，请先详细阅读该手册并妥善保管，以备今后参考！本机内有高压电源,使用不当，有可能引起火灾及触电，严重者可能导致重伤及生命安全，请仔细阅读以下注意事项，注意操作。
设置场所请将本机置放在稳定的支架上使用，不可在颠簸、振动的环境中使用，如因人为跌落所造成的损坏，不予保修。
请勿将本机置于有水份或潮湿环境中，不要将本机暴露在雨雪中，以免引起火灾或机器故障。
请勿将本机置于阳光直晒或温度高的地方。
请勿将本机置于靠近发热产品及有磁性的物体附近，以免影响机器正常使用。
使用勿用湿手触摸电源。
拔电源时，请勿强拉电线，请将插头拔离插座。
为了你的安全，请勿自行拆卸本机外壳。
不可使用汽油、酒精等液体清洁剂，用柔软的干抹布擦拭即可。
长时间不使用此机时，请拔出电源插头。
其它为防止触电，有可靠的电源保障，请使用宽片插头宽槽插座相配并确保接插牢靠。
使用完本机后，请关闭电源。
如发现异常，请与各地经销商或我公司客服中心联系。
本机不适用儿童操作，请务必在大人指导下进行操作。
温馨提示未经我公司或我公司授权单位的认可同意，任何对本机的改装及变动都可能对用户的使用带来诸多不便。
功能特点１，支持手写划屏功能２，Ｕ盘加歌功能３，幻影功能５，在线换肤功能４，支持光电鼠标，点歌面板，红外点歌触摸屏６，单屏双屏切换功能7，支持串口（ＳＡＴＡ）硬盘除了具有以上双屏硬盘点歌机的常见普通功能外，新版双屏硬盘点歌机还具有六大独特功能：１，数码像框功能：融合了目前流行的数码像框的功能。
直接以数码像框各种出图效果播放数码像机的（ＳＤ/ＣＦ/ＭＳ等）存储卡中的数码照片，同时播放硬盘中的歌曲作背景音乐。
方便朋友聚会分享数码照片。
２，流媒体播放器功能：能接Ｕ盘，ＵＳＢ硬盘播放其中的各种流媒体文件(.AVI,.DAT,.MPG,MP3,JEPG,BMP等）３，双ＵＳＢ口：除了可以用Ｕ盘加歌外，还可连接电脑高速ＵＳＢ２。
电视电脑触摸一体机使用说明书(内置版)
产品基本功能
• 1、电视功能：拥有1080P全高清LCD（或LED）液晶显示屏幕，具备色 差端子、VGA、HDMI等多种常用接口，高清播放随心所欲； • 2、电脑功能： 内置电脑，使用方便，性能稳定； • 3、触摸功能：配备行业先进的一第优第五代光学触摸产品---流畅的 触摸体验！ • 4、电子白板功能：设备附带的白板应用软件，代替传统的粉笔黑板， 用笔或手指都可书写，无限次的使用，有价值的书写还可以永久储存， 真正无尘易用。 • 5、画中画功能：可以一边看电视新闻，一边上网看连续剧，上网与 电视同步，游戏与卡拉OK同步……（选配）
• 2.2 壁挂件安装
壁挂架配件清单如下，若有升级，请以收到的实物为准。壁 挂架安装请按照壁挂件包装说明进行，建议由专业人士安装。 编号 A 组件名称 墙壁固定架 数量 2
B C
D E F G H I
电视背板固定架 支撑架
M5×8螺丝 M5×30螺丝 自攻螺丝 塑料膨胀管 M8×25螺丝 M6×16螺丝
1.重新启动一体机 2.打开桌面触摸标定程序进行重新标定之后重启计算机
触摸不灵敏或部分区域无触摸
1.检查是否有杂物遮挡一体机上方左右角的摄像头，一体机下方反光条上是否有尘 土，若有则清理干净后对触摸进行标定 2.重新安装触摸驱动程序
很高兴您能使用我们的产品，请对 我们的工作提出您的宝贵意见！
产品常规应用
• 1、卡拉OK：拥有KTV点唱功能，即点即唱，娱乐方便。（适用于家 庭或单位聚会） • 2、电玩：可以当一部电玩，可接入手柄、方向盘、摇杆、跳舞毯等 USB外设。（适用于家庭、游戏娱乐场所） • 3、多媒体会议：可做会议展示电子文档即插即用，无需投影仪、投 影幕布、电脑、幻灯片展示台、DVD播放器等多余设备。 • 4、导购机：具有导购、导示功能，给与顾客指引，方便顾客查找自 己所需的产品，并带有广告宣传等附加功能（适用于商场超市、医院、 图书馆、酒店、展览馆、批发商城等） • 5、电子查询：通过运营商对各种电子文件、信息的输入和编辑，顾 客可以自助查询到所需要的信息，减低问询的人员成本。（适用于电 信、图书馆、医院等公共场所） • 6、视频监控：可以对监视区域的安全监控，任意调出各个区域的实 况视频，进行数据分析。（适用于学校考场监控、安防监控、公安监 控等）
触控一体机使用手册说明
触控一体机使用手册说明触派电子；只为让触控一体机市场更透明，“技术透明”、“成本透明”、“服务透明”、打造标准，从触派开始，优胜劣汰由大众抉择。
它是一种结合平板电脑的触摸、液晶电视机的尺寸还有台式电脑的所有配件而成。
当然它所发挥的功能也是非常的强大，具备的能力在下面会详细提到。
它适合在各种不同的地方场合使用，凭借着出色的功能丰富性已经牢牢占据着如；银行柜台、展会信息展示、房产信息展示、会议交流等等。
功能上基本可以完成电脑和平板电脑上的任何操作应用、而更细化的功能需要根据软件实现。
大部分软件可以找专门人员制作。
储存空间足够的情况下，可以安装很多软件种类。
触摸点数上普遍采用10点触控，12点触控。
其实太高很少能派上用场，反而会增加出现故障等情况发生。
当然在我们普遍选取的时候，会面临太多不可控问题，例如触摸一体机内部采用的配件，防水密封性，延保服务，在一样可靠的牌子情况下、价太高可以忽略。
但是特别低的你就当心了，当然这个低是参考平均标准的哦，很多无良的拿二手配件翻新给你，根本查不到，用起来感觉是一样的，但是触摸屏一体机核心在使用寿命上，比如一般触摸屏点击六千万次（当然这是触派电子产的才有这么高）而你500万次就挂了，这里需要注意，在所有配件相同的情况触摸寿命很关键，所以选择些科技能力强，有些知名度的。
标准配置通常只够会展。
特别要求的需要自行额外沟通。
处理器i5四核已经算高配，通常配i3双核。
实事证明i3在当今已不足以硬度各类大型处理类软件。
所以需i5四核处理器时要特别声明否则一旦装机完成很难重新加装。
一般都用W8系统，也有个别用安卓系统。
这个需要根据习惯而定，作为需展示资料的工具都会采取和U盘对接导入内容。
从这点上看安卓系统是有一定复杂性。
不像W8那种可快速便捷的运用起来。
而且市面文件展示归纳软件很少有针对安卓开发。
.英文全译. Jane Wei did not return my message, probably because I was the phrase "I wish your company be on the upgrade" let between us have a great sense of distance, but I do so is now quiet, yes, I most need at the moment is quiet, and theneir work in the stillness.The next day, I got up early, then had a quick breakfast, he embarked on a long road of the candidates, till sunset at dusk after temporarily idle, but the results are not just as one wishes, at least not encountered is the company has intention to me, mostly let me the patience to wait for the candidates for the results, although heart very anxious indeed, but also within an expected result, after all, the society is the lack of talent, which I find work in Xuzhou have deep experience, finally just under Li Xiaoyun's help, only to get a satisfactory job.Dark some, I took a tired to that often play racing with rice color of the square, to find a wooden chair and sat down, and then some absence of those who watched the children playing the car, say in the heart envy, not the more helpless, helpless childhood away, helpless life is not just as one wishes."Uncle Uncle, can you buy me flowers?"I looked up and found standing next to a flower girl, smiled and asked her: "how do you know that uncle take?""Because you have a girl friend, I have seen several times you bring her here to play the car, but at that time I haven't started selling flowers Hee hee!"I anyway boring with this little girl chatted: "now why are you going to the flower?""Our class had a friend is sick, she is my friend, can be beautiful, but no money to see a doctor, we have these good friends can use after school time to square flower, make money to cure her, our most close to the square, I am here to flower Uncle, you buy some flowers, and I thank you for the beans!"。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
中电数码触控一体机说明书
（原创实用版）
目录
1.中电数码触控一体机概述
2.产品特点
3.安装与连接
4.使用方法
5.维护与注意事项
6.故障排除
7.联系我们
正文
一、中电数码触控一体机概述
中电数码触控一体机是我公司推出的一款高性能、多功能的触控设备，适用于各种商务、教育、娱乐等场合。
该产品集成了触摸屏、电脑、音响等功能，用户只需轻触屏幕，即可实现各种操作，方便快捷。
二、产品特点
1.高清触摸屏：采用高品质触摸屏，画质清晰，操作流畅。
2.多点触控：支持多点触控，用户可以同时进行多个操作。
3.强大的性能：采用高性能处理器，运行速度快，能够满足各种应用需求。
4.多样化的接口：提供丰富的接口，支持多种设备连接。
三、安装与连接
1.安装位置：选择合适的安装位置，确保触控一体机稳定放置。
2.连接电源：连接电源线，确保电源正常供电。
3.连接设备：根据需要连接电脑、音响等设备。
4.软件安装：安装触控一体机驱动程序及配套软件。
四、使用方法
1.开机：按下电源键，开启触控一体机。
2.登录系统：输入用户名和密码，登录操作系统。
3.运行应用：在桌面或开始菜单中找到需要的应用程序，双击运行。
4.关闭设备：使用完毕后，关闭电源，拔掉连接设备。
五、维护与注意事项
1.保持设备清洁：定期擦拭设备表面，避免灰尘、油渍等污染。
2.避免阳光直射：不要将触控一体机放置在阳光直射的地方，以免损坏屏幕。
3.避免撞击：使用过程中，避免大力撞击设备，以免损坏内部元件。
4.定期检查：定期检查设备运行状况，发现问题及时处理。
六、故障排除
1.开机无反应：检查电源线是否连接正常，电源是否正常供电。
2.触摸屏无反应：检查触摸屏连接是否正常，触摸屏是否损坏。
3.软件无法运行：检查软件安装是否正确，系统是否出现故障。