744273801;中文规格书,Datasheet资料
4.1 4.0 3.02012-07-172012-07-172010-02-18SStSStSBaSStSBaWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-SL5 HCof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Cleaning solvents which are used to clean the application might damage or change the characteristics of the component.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The soldering profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be su-stained.•All products are supposed to be used before the end of the period of 12 months based on the transfer of title, if not a 100% solderability can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744273801。
744314047;中文规格书,Datasheet资料
Bezeichnung :description :Marking = part numberEigenschaften /properties Lerrlaufinduktivität/initial inductance Nenn-Induktivität /33% Umgebungstemperatur / temperature:+20°CWE-Superflux ME08-01-01ME 06-09-27NameDatum / dateArbeitstemperatur / operating temperature: -40°C - +150°C Metra HIT 27I für/for R DCFreigabe erteilt / general release:Kunde / customerF Werkstoffe & Zulassungen / material & approvals :Würth Elektronik..................................................................................G Eigenschaften / general specifications :not exceed 150°C under worst case operating conditions.It is recommended that the temperature of the part does coating:blackHP 34401 A & Fluke 54II für/for I DC; Luftfeuchtigkeit / humidity:WAYNE KERR 3260B für/for L 0; I SAT Elektrische Eigenschaften / electrical properties :Umgebungstemp. / ambient temperature: -40°C - +100°C Basismaterial / base material:Draht / wire: AIEIW-200 D Prüfgeräte / test equipment :http://www.we-online.deDatum / date..................................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked .................................................................................................POWER-CHOKE WE-HCIE Testbedingungen / test conditions :Änderung / modificationVersion 1Version 2Bezeichnung :description :H Induktivitätskurve / Inductance curve :ME08-01-01ME 06-09-27NameDatum / dateD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGVersion 2..............................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth Elektronik....................................................................................................................................................................Freigabe erteilt / general release:Kunde / customerPOWER-CHOKE WE-HCIDATUM / DATE : 2008-01-01Bezeichnung :description :I Temperaturanstieg / Temperature rise curve :ME08-01-01ME 06-09-27NameDatum / dateWürth ElektronikVersion 2..........................................................................................................................................Freigabe erteilt / general release:Kunde / customerDatum / dateUnterschrift / signature...............................................................................................................................................................Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGBezeichnung :description :a 330,0± 2,0mmb 21,0± 0,8mmc 13,00± 0,5mmd 100,0± 1,5mmME08-01-01ME 06-09-27NameDatum / dateD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGVersion 2................................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth Elektronik....................................................................................................................................................................Freigabe erteilt / general release:Kunde / customerRollenspezifikation / Reel specification:SPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIThe Force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 744314047。
744731680;中文规格书,Datasheet资料
4.1 4.0 3.02012-06-282012-05-102011-04-07SStSStCZSStCZWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Inductance vs. Current Characteristics:H4: Classification Wave Soldering Profile:H5: Classification Wave ProfileProfile FeaturePreheat- Temperature Min (T smin )- Temperature Typical (T stypical ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Δ preheat to max Temperature Peak temperature (T p )Time of actual peak temperature (t p )Ramp-down rate - Min - Typical - MaxTime 25°C to 25°C Pb-Free Assembly 100°C 120°C 130°C 70 seconds 150°C max.250°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesSn-Pb Assembly 100°C 120°C 130°C 70 seconds 150°C max.235°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesrefer to EN 61760-1:2006H Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-TISof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the wire in-sulation, the marking or the plating. The washing varnish agent could have a negative effect on the long turn function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical wave soldering specification, otherwise no warranty will be sustai-ned.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744731680。
74477620;中文规格书,Datasheet资料
description := Start of winding Marking = Inductance code33% Umgebungstemperatur / temperature:+20°CFerritMST 04-10-11NameDatum / date.............................................................................................................................................................................................................................................Würth ElektronikHP 4274 A für/for L und/and Q HP 34401 A für/for R DC und I DCD Prüfgeräte / test equipment:POWER-CHOKE WE-PD2Würth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Basismaterial / base material: Datum / date.........................................................................Unterschrift / signature Kontrolliert / approvedIt is recommended that the temperature of the part does not exceed 125°C under worst case operating conditionsF Werkstoffe & Zulassungen / material & approvals:Endoberfläche / finishing electrode:Draht / wire:Sn/Cu - 99,3/0,7%2UEWF 155°CUmgebungstemp. / ambient temperature: -40°C - + 85°C Kunde / customerFreigabe erteilt / general release:E Testbedingungen / test conditions:Betriebstemp. / operating temperature: -40°C - + 125°C Luftfeuchtigkeit / humidity:G Eigenschaften / general specifications:Änderung / modificationVersion 1description :MST 04-10-11NameDatum / datePOWER-CHOKE WE-PD2DATUM / DATE : 2004-10-11H Induktivitätskurve / Inductance curve:Freigabe erteilt / general release:Kunde / customer...........................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikWürth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400...........................................................................................................................................................Geprüft / checked Kontrolliert / approvedÄnderung / modificationVersion 1Bezeichnung :description :a 330,0± 0,5mmb 20,20± 0,5mm+ 0,5- 1,0d100,0± 0,5mmMST 04-10-11NameDatum / dateArtikelnummer / part number :74477620SPEICHERDROSSEL WE-PD2POWER-CHOKE WE-PD2Freigabe erteilt / general release:Kunde / customermm 13,00c ...........................................................................................................................................................Datum / dateUnterschrift / signature Würth Elektronik...........................................................................................................................................................Würth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedRollenspezifikation / Reel specification:Änderung / modificationVersion 1The force for tearing off cover tape is20 to 70 grams in arrow directionfeeding directionThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stageRoHS compliantLF分销商库存信息: WURTH-ELECTRONICS 74477620。
744824101;中文规格书,Datasheet资料
Bezeichnung :description :33%+25°C1500 V,50 Hz 5mA , 2 sec.MST Version 504-10-11MST Version 404-06-22MST Version 303-12-01AGVersion 203-04-12MST Version 103-03-07NameÄnderung / modificationDatum / datenot exceed 125°C under worst case operating conditions.Betriebstemp. / operating temperature: -40°C - + 125°C Übertemperatur / temperature rise: < 55 K It is recommended that the temperature of the part does Luftfeuchtigkeit / humidity:Umgebungstemperatur / temperature: Prüfspannung / testing voltageD Prüfgeräte / test equipment :HP 34401 A für/for I NWAYNE KERR WK3260B/WK3265 f ür/for L 0/L N und/and RDC E Testbedingungen / test conditions :744824101Kleber / glue:Kunde / customer :STROMKOMP. DROSSEL WE-CMB COMMON MODE CHOKE WE-CMBArtikelnummer / part number :Spezifikation für Freigabe / specification for releaseDatum / date...........................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ....................................................................................................................................................Freigabe erteilt / general release:Kunde / customerUL94V-2Abstandhalter / spacer2UEWF (155°C)Würth Elektronik.........................................................................F Werkstoffe & Zulassungen / material & approvalsG Eigenschaften / general specifications :UL94V-0Klimabeständigkeit/ climatic class: 40/125/21Sockel / base:UL94V-0Draht / wire:RoHS compliantLFThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electroniccomponent in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.SEITE 1 VON 1/分销商库存信息: WURTH-ELECTRONICS 744824101。
744824220;中文规格书,Datasheet资料
Bezeichnung :description :33%+25°C1500 V,50 Hz 5mA , 2 sec.MST Version 504-10-11MST Version 404-06-22MST Version 303-12-01AGVersion 203-04-12MST Version 103-03-07NameÄnderung / modificationDatum / datenot exceed 125°C under worst case operating conditions.Betriebstemp. / operating temperature: -40°C - + 125°C Übertemperatur / temperature rise: < 55 K It is recommended that the temperature of the part does Luftfeuchtigkeit / humidity:Umgebungstemperatur / temperature: Prüfspannung / testing voltageD Prüfgeräte / test equipment :HP 34401 A für/for I NWAYNE KERR WK3260B/WK3265 f ür/for L 0/L N und/and RDC E Testbedingungen / test conditions :744824220Kleber / glue:Kunde / customer :STROMKOMP. DROSSEL WE-CMB COMMON MODE CHOKE WE-CMBArtikelnummer / part number :Spezifikation für Freigabe / specification for releaseDatum / date...........................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ....................................................................................................................................................Freigabe erteilt / general release:Kunde / customerUL94V-2Abstandhalter / spacer2UEWF (155°C)Würth Elektronik.........................................................................F Werkstoffe & Zulassungen / material & approvalsG Eigenschaften / general specifications :UL94V-0Klimabeständigkeit/ climatic class: 40/125/21Sockel / base:UL94V-0Draht / wire:RoHS compliantLFThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electroniccomponent in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.SEITE 1 VON 1/分销商库存信息: WURTH-ELECTRONICS 744824220。
74477510;中文规格书,Datasheet资料
Bezeichnung :description := Start of winding Marking = Inductance code33% Umgebungstemperatur / temperature:+20°CFerritMST 04-10-11NameDatum / dateÄnderung / modificationVersion 1..............................................................................................................................................................................................................................................Würth ElektronikHP 4274 A für/for L und/and Q HP 34401 A für/for R DC und I DCD Prüfgeräte / test equipment:74477510SPEICHERDROSSEL WE-PD2POWER-CHOKE WE-PD2Artikelnummer / part number :Würth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Umgebungstemp. / ambient temperature: -40°C - + 85°C Basismaterial / base material: Datum / date..............................................................................Unterschrift / signature Kontrolliert / approvednot exceed 125°C under worst case operating conditionsF Werkstoffe & Zulassungen / material & approvals:Endoberfläche / finishing electrode:Draht / wire:Sn/Cu - 99,3/0,7%2UEWF 155°CG Eigenschaften / general specifications:Betriebstemp. / operating temperature: -40°C - + 125°C Kunde / customerFreigabe erteilt / general release:E Testbedingungen / test conditions:Luftfeuchtigkeit / humidity:It is recommended that the temperature of the part does RoHS compliantLFdescription :MST 04-10-11NameDatum / dateÄnderung / modificationVersion 1Würth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Datum / dateUnterschrift / signature Würth ElektronikH Induktivitätskurve / Inductance curve :Freigabe erteilt / general release:..............................................................................................................................................................Geprüft / checked Kontrolliert / approvedKunde / customer..............................................................................................................................................................POWER-CHOKE WE-PD2DATUM / DATE : 2004-10-11description :a 330,0± 0,5mmb 20,20± 0,1mm+ 0,5- 1,0d 100,0± 1,0mmMST 04-10-11NameDatum / dateÄnderung / modificationVersion 1mm 13,00c POWER-CHOKE WE-PD2Rollenspezifikation / Reel specification:Freigabe erteilt / general release:Kunde / customer..............................................................................................................................................................Datum / dateUnterschrift / signature Würth Elektronik..............................................................................................................................................................Würth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedThe force for tearing off cover tape is 20 to 70 grams in arrow directionfeeding directionThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage分销商库存信息: WURTH-ELECTRONICS 74477510。
7448262013;中文规格书,Datasheet资料
Bezeichnung :description :XXL A43,5 max.mm B 23,5 max.mm C 10,5 ± 0,5mm D 18,5 ± 0,5mm E 43,0 max.mm F 3,0 ± 0,5mm G1,8 typ.mm33%+25°C1500 V,50 Hz 5 mA / 2 sec.MSTVersion 208-08-12MST Version 107-11-29NameÄnderung / modificationDatum / dateWürth Elektronik..................................................................................Betriebstemp. / operating temperature: -40°C - + 125°C Übertemperatur / temperature rise: < 55 K It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.Kleber / glue:Freigabe erteilt / general release:Kunde / customerF Werkstoffe & Zulassungen / material & approvalsG Eigenschaften / general specifications :D Prüfgeräte / test equipment :UL94V-2Datum / date..................................................................................Unterschrift / signatureKontrolliert / approvedD-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ....................................................................................................................................................................Spezifikation für Freigabe / specification for releaseDATUM / DATE : 2008-08-12Kunde / customer :Klimabeständigkeit/ climatic class: 40/125/21Sockel / base:UL94V-0Draht / wire:Class F STROMKOMP. DROSSEL WE-CMB COMMON MODE CHOKE WE-CMBArtikelnummer / part number :7448262013A Mechanische Abmessungen / dimensions :E Testbedingungen / test conditions :HP 34401 A für/for I NLuftfeuchtigkeit / humidity:Umgebungstemperatur / temperature: Prüfspannung / testing voltage N1/N2WAYNE KERR WK3260B/WK3265 für/for L 0/L N und/and RDC This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.SEITE 1 VON 1/分销商库存信息: WURTH-ELECTRONICS 7448262013。
744302010;中文规格书,Datasheet资料
Bezeichnung :description :33%Umgebungstemperatur / temperature:+20°CME 08-01-01NameDatum / dateDatum / date.............................................................................Unterschrift / signatureKontrolliert / approvedGeprüft / checked ...................................................................................................................................................................................Änderung / modificationVersion 1SPEICHERDROSSEL WE-HCM-75POWER-CHOKE WE-HCM-75Artikelnummer / part number :744302010D Prüfgeräte / test equipment :Würth Elektronik eiSos GmbH & Co. KGE Testbedingungen / test conditions :Luftfeuchtigkeit / humidity:WAYNE KERR 3260B für/for L 0; I SAT F Werkstoffe & Zulassungen / material & approvals :Ferrit/ferrite Arbeitstemperatur / operating temperature: -40°C - +125°C Metra Hit 27I für/for R DC;It is recommended that the temperature of the part does Agilent N5776A für/for I DC;Umgebungstemp. / ambient temperature: -40°C - +85°C Basismaterial / base material: Endoberfläche / finishing electrode:Sn/Cu - 99.3/0.7 %Würth Elektronikhttp://www.we-online.deD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Freigabe erteilt / general release:Kunde / customerG Eigenschaften / general specifications :not exceed 125°C under worst case operating conditions.Draht / wire:FlatewireRoHS compliantBezeichnung :description :H Induktivitätskurve / Inductance curve :ME 08-01-01NameDatum / dateArtikelnummer / part number :744302010SPEICHERDROSSEL WE-HCM-75POWER-CHOKE WE-HCM-75DATUM / DATE : 2008-01-01Freigabe erteilt / general release:Kunde / customer...............................................................................................................................................................Datum / dateUnterschrift / signature Würth Elektronik..........................................................................................................................................Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGRoHS compliantLFBezeichnung :description :I Temperaturanstieg / Temperature rise curve :ME 08-01-01NameDatum / dateVersion 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KG...............................................................................................................................................................Datum / dateUnterschrift / signature Freigabe erteilt / general release:Kunde / customerWürth Elektronik..........................................................................................................................................RoHS compliantBezeichnung :description :ME 08-01-01NameDatum / dateSPEICHERDROSSEL WE-HCM-75POWER-CHOKE WE-HCM-75Freigabe erteilt / general release:Kunde / customer...............................................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth Elektronik............................................................................................................................................D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGThe Force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionRoHS compliantThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronicequipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. Itis essential to give consideration when to install a protective circuit at the design stage.分销商库存信息: WURTH-ELECTRONICS 744302010。
7443556450;中文规格书,Datasheet资料
Bezeichnung :description :Marking = part numberEigenschaften / properties Leerlaufinduktivität/initial inductance DC-Widerstand /DC-resistance 33%Umgebungstemperatur / temperature:+20°CWE-Perm2When exposed to shock and vibration stress, it is recommendedto fix the device by seperate means (such as glue, fasteners, etc).ME 09-11-08Rst 08-02-28Rst 08-02-18NameDatum / dateVersion 3It is recommended that the temperature of the part does not Luftfeuchtigkeit / humidity:Arbeitstemperatur / operating temperature: -40°C - +125°C G Eigenschaften / general specifications:E Testbedingungen / test conditions:WAYNE KERR 3260B für/for L 0; R DC ; I SAT ; I N7443556450Elektrische Eigenschaften / electrical properties:Kunde / customer :SPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIArtikelnummer / part number : http://www.we-online.deDatum / date..................................................................................Unterschrift / signatureKontrolliert / approvedD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400exceed 125°C under worst case operating conditions.D Prüfgeräte / test equipment:Umgebungstemp. / ambient temperature: -40°C - +75°CFreigabe erteilt / general release:Draht / wire:Polyamide/Imid coatingBasismaterial / base material: F Werkstoffe & Zulassungen / material & approvals:Würth Elektronik..................................................................................Kunde / customerVersion 1Version 2Geprüft / checked .................................................................................................Änderung / modificationdescription :H Induktivitätskurve / Inductance curve:ME 09-11-08Rst 08-02-28Rst 08-02-18NameDatum / datePOWER-CHOKE WE-HCIDATUM / DATE : 2009-11-02Freigabe erteilt / general release:Kunde / customer....................................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikVersion 3Version 2..............................................................................................................................................Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationdescription :I Temperaturanstieg / Temperature rise curve:ME 09-11-08Rst 08-02-28Rst 08-02-18NameDatum / dateDATUM / DATE : 2009-11-02Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400....................................................................................................................................................................Datum / dateUnterschrift / signaturehttp://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationSPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIFreigabe erteilt / general release:Kunde / customerWürth ElektronikVersion 3Version 2..............................................................................................................................................description :ME 09-11-08Rst Rst 08-02-18NameDatum / dateVersion 3SPEICHERDROSSEL WE-HCI POWER-CHOKE WE-HCIFreigabe erteilt / general release:Kunde / customer...................................................................................................................................................................................................................................Version 1Datum / dateUnterschrift / signature Würth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modificationVersion 2.................................................................................The Force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7443556450。
744822301;中文规格书,Datasheet资料
Bezeichnung :description :33%+25°C1500 V,50 Hz 5mA , 2 sec.MST Version 404-10-11MST Version 304-05-24MSTVersion 203-10-09MST Version 103-07-03NameÄnderung / modificationDatum / dateWürth Elektronik.........................................................................F Werkstoffe & Zulassungen / material & approvalsG Eigenschaften / general specifications :D Prüfgeräte / test equipment :Freigabe erteilt / general release:Kunde / customerDatum / date...........................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked ....................................................................................................................................................Spezifikation für Freigabe / specification for releaseUL94V-2Abstandhalter / spacer:UL94V-0Klimabeständigkeit/ climatic class: 40/125/21Sockel / base:UL94V-0Draht / wire:2UEWF (155°C)Kleber / glue:Kunde / customer :STROMKOMP. DROSSEL WE-CMB COMMON MODE CHOKE WE-CMBArtikelnummer / part number :744822301WAYNE KERR WK3260B/WK3265 f ür/for L 0/L N und/and RDC E Testbedingungen / test conditions :HP 34401 A für/for I NLuftfeuchtigkeit / humidity:Umgebungstemperatur / temperature: Prüfspannung / testing voltageBetriebstemp. / operating temperature: -40°C - + 125°C Übertemperatur / temperature rise: < 55 K It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.RoHS compliantLFThis electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electroniccomponent in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.SEITE 1 VON 1/分销商库存信息: WURTH-ELECTRONICS 744822301。