德国螺栓标准141110
螺栓螺母德标、欧标、国标对照表
平垫圈用于自攻螺钉和垫圈组合件
GB/T 97.5-2002
DIN EN ISO 10673
DIN 934
Hexagon nuts,style 1-Product grades A and B(ISO: 4032:1999)
1型六角螺母
GB/T 6170-2000
DIN EN ISO 4033
Hexagon nuts,style 2-Product grades A and B(ISO: 4033:1999)
DIN 7
Parallel pins,of unhardened steel and austeniticstainless steel(ISO 2338:1997)
圆柱销不淬硬钢和奥氏体不锈钢
GB/T 119.1-2000
DIN EN ISO 8733
DIN 7979
Parallel pins whit internal thread,of unhardened steel and austenitic stainless steel(ISO 8733:1997)
十字槽沉头螺钉第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3
GB/T 819.2-1997
DIN EN ISO 7047
DIN 966
Countersunk raised head screws (common head style) with type H or type Z cross recess-Product grade A(ISO 7047:1994)
德国标准和国际标准、中国标准中英文对照表(紧固件)
德国标准和国际标准、中国标准中英文对照表序号德国标准中文品名英文品名国际标准中国标准Item DIN-Standard Description in Chinese Description in English ISO-Standard GB-Standard1 DIN1 圆锥销taper pins ISO2339 GB1172 DIN7 圆柱销parallel pins ISO2338 GB119-863 DIN84 开槽圆柱头螺钉slotted cheese head screws ISO1207 GB65-854 DIN85 开槽盘头螺钉slotted pan head screws ISO1580 GB67-855 DIN93 单耳止动垫圈tab washers GB8546 DIN94 开口销split cotter pins ISO1234 GB917 DIN95 开槽半沉头木螺钉slotted raised csk head wood screws GB1018 DIN96 开槽半圆头木螺钉slotted round head wood screws GB999 DIN97 开槽沉头木螺钉slotted countersunk head wood screws GB10010 DIN125-A 平垫plain washers ISO7089 GB97.1-8511 DIN125-B 平垫(带倒角) mediun washers ISO7090 GB97.2-8512 DIN126 平垫plain washers ISO709113 DIN127-A 重型弹垫spring lock washers,tang ends GB724414 DIN127-B 标准弹垫spring lock washers,square ends GB93-8715 DIN128-A 鞍形弹垫single coil spring lock washers GB7245-8716 DIN137-A 弹簧止动垫圈curved spring washers17 DIN137-B 波形弹垫wave spring washers GB95518 DIN186 T型方颈螺栓T-head bolts with square neck GB37-8819 DIN188 T型双接头螺栓T-head bolts with double nip20 DIN258 螺纹圆锥销taper pins with threaded end ISO873721 DIN261 T型头螺栓T-head bolts22 DIN315AF 蝶型螺母(美制) wing nuts amercia form23 DIN315DF 蝶型螺母(德制) wing nuts germany form GB62-8824 DIN316AF 蝶型螺钉(美制) wing screws amercia form25 DIN317DF 蝶型螺钉(德制) wing screws germany form26 DIN319 圆球型盖型螺母ball knobs27 DIN404 开槽带孔球面圆柱头螺钉slotted capstan screws GB832-8828 DIN417 开槽长圆柱端紧定螺钉slotted set srews with full dog point ISO7435 GB75-8529 DIN427 开槽平端紧定螺钉(半牙) slotted set srews with chamfered end ISO2342 GB73-8530 DIN431 小六角特薄细牙螺母pipe nuts with thread GB808-8831 DIN432 外舌止动垫圈external tap GB856-8832 DIN433 小垫圈(用于圆柱头螺钉) washers for cheese head screws ISO7092 GB848-9533 DIN434 方斜垫圈(U型) square taper washers for U-section GB852-8834 DIN435 方斜垫圈(I型) square taper washers for I-sections GB852-8835 DIN436 方垫圈square washers36 DIN438 开槽凹端紧定螺钉slotted set with cup point ISO7436 GB74-8537 DIN439 六角薄螺母hexagon thin nuts ISO4035 GB6172-8638 DIN439 细牙六角薄螺母hexagon thin nuts ISO8675 GB6173-8639 DIN440 木螺钉专用垫圈rounds washers for wood constructions ISO709440 DIN443 密封帽sealing caps,push-in type41 DIN444 活节螺栓B 型eye bolts form B GB798-8842 DIN462 内舌止动垫圈internal tab washers43 DIN463 双耳止动垫圈washers with two taps GB855-8844 DIN464 滚花高头螺钉knurled thumb screws with collar GB834-8845 DIN465 开槽滚花高头螺钉slotted knurled thumb screws with collar46 DIN466 滚花高螺母knurled thumb nuts with collar GB806-8847 DIN467 滚花薄螺母knurled thumb thin nuts GB807-8848 DIN470 锁紧垫圈sealing washers49 DIN471 轴用弹性挡圈retaining rings for shafts(external),circlips GB894.1-8650 DIN472 孔用弹性挡圈retaining rings for bores(internal),circlips GB893.1-8651 DIN478 方头带垫螺栓square head bolts with collar52 DIN479 方头圆柱底端螺栓square head bolts with half dog point53 DIN480 方头带垫半圆底端螺栓square head bolts with collar,half dog point and rounded end54 DIN508 T型槽螺母T-slot nuts ISO29955 DIN525 单头螺柱single end studs56 DIN529 地脚螺栓masonry bolts GB799-8857 DIN546 带槽圆螺母slotted round nuts GB817-7658 DIN547 端面带孔圆螺母round nuts with drilled holes in one face GB815-8859 DIN551 开槽平端紧定螺钉slotted sit screws with flat point ISO4776 GB73-8560 DIN553 开槽锥端紧定螺钉slotted set screws with cone point ISO7434 GB71-8561 DIN555 六角螺母hexagon nuts ISO403462 DIN557 方螺母-C square nuts GB39-8863 DIN558 六角头螺钉hexagon screws ISO401864 DIN561 六角头圆柱端紧定螺钉hexagon set screws with full dog point65 DIN562 薄型方螺母-B square nuts without bevel(pressed nuts)66 DIN571 六角头木螺钉hexagon head wood screws (coach screws) GB102-8667 DIN580 吊环螺钉lifting eye bolts ISO3266 GB825-7668 DIN582 吊环螺母lifting eye nuts69 DIN601 六角头螺栓hexagon bolts ISO401670 DIN603 大半圆头方颈螺栓(马车螺栓) mushroom head square neck bolts (carriage bolts) ISO8677 GB14-8871 DIN604 沉头带插销马车螺栓flat countersunk nib bolts72 DIN605 沉头长方颈马车螺栓flat countersunk long square neck bolts73 DIN607 半圆头带插销马车螺栓cup head nib bolts74 DIN608 沉头短方颈马车螺栓flat countersunk short square neck bolts75 DIN609 六角头精配螺栓（长螺纹）hexagon fitted bolts,long thread76 DIN610 六角头精配螺栓（短螺纹）hexagon fitted bolts,short thread77 DIN653 滚花平头螺钉knurled thumb screws thin type GB835-8878 DIN660 半圆头铆钉round head rivets ISO1051 GB867-8679 DIN661 沉头铆钉contersunk head rivets ISO1051 GB869-8680 DIN662 半沉头铆钉raised contersunk head rivets ISO105181 DIN674 大扁头铆钉mushroom head rivets ISO105182 DIN703 重型侧面带孔圆螺母adjusting rings,heavy range (shafting collars)83 DIN705 侧面带孔圆螺母adjusting rings,light range (shafting collars) GB816-8884 DIN741 卡头wire rope clips85 DIN787 T型槽螺钉T-slot screws ISO29986 DIN835 双头螺柱（牙长=2D）studs-metal (end=2d) GB900-8887 DIN906 内六角锥型闭锁螺钉hexagon socket pipe plugs,conical thread88 DIN908 内六角直型闭锁螺钉hexagon socket screw plugs,cyl. thread89 DIN909 外六角锥型闭锁螺钉hexagon head pipe plugs,conical thread90 DIN910 外六角直型闭锁螺钉hexagon head screw plugs,cyl.thread91 DIN911 内六角扳手socket wrenches ISO293692 DIN912 内六角圆柱头螺钉hexagon socket cap screws ISO4762 GB70-8593 DIN913 内六角平端紧定螺钉hexagon socket set screws with flat point ISO4026 GB77-8594 DIN914 内六角尖端紧定螺钉hexagon socket set screws with cone point ISO4027 GB78-8595 DIN915 内六角圆柱端紧定螺钉hexagon socket set screws with dog point ISO4028 GB79-8596 DIN916 内六角凹端紧定螺钉hexagon socket set screws with cup point ISO4029 GB80-8597 DIN917 薄型盲螺母hexagon cap nuts98 DIN920 开槽小圆柱头螺钉slotted short cheese head screws99 DIN921 开槽大圆柱头螺钉slotted large cheese head screws GB838-88100 DIN923 开槽圆柱头轴肩螺钉slotted pan head screws with shoulder GB830-88101 DIN927 开槽无头轴肩螺钉slotted shoulder screws102 DIN928 焊接方螺母square weld nuts GB/T13680-92103 DIN929 焊接六角螺母hexagon weld nuts GB/T13681-92104 DIN931 六角头螺栓（半牙）hexagon head screws ISO4014 GB5782-86105 DIN933 六角头螺栓（全牙）hexagon head screws ISO4017 GB5783-86106 DIN934 六角头螺母(1型) hexagon full nuts ISO4032 GB6170-86107 DIN934 细牙六角头螺母(1型) hexagon full nuts ISO8673 GB6171-86108 DIN935 开槽六角螺母hexagon slotted and castle nuts ISO7035 GB6178-86109 DIN936 六角头薄螺母hexagon thin nuts ISO4035 GB6172.1-86110 DIN937 六角头开槽薄螺母hexagon thin slotted and castle nuts ISO7038 GB6181-86111 DIN938 双头螺距（牙长=1D）studs metal (end=1d) GB897-88112 DIN939 双头螺距（牙长=1.25D）studs metal (end=1.25d) GB898-88113 DIN940 双头螺距（牙长=1.5D）studs metal (end=1.5d)114 DIN960 六角头细牙螺栓（半牙）hexagon head bolts,metric fine pitch thread ISO8765 GB5785-86115 DIN961 六角头细牙螺栓（全牙）hexagon head bolts,metric fine pitch thread ISO8676 GB5786-86116 DIN962 头部穿孔六角头螺栓additional shapes and versions for bolts117 DIN963 开槽沉头螺钉slotted countersund head screws ISO 2009 GB68-85118 DIN964 开槽半沉头螺钉slotted raised countersunk oval head screws ISO 2010 GB69-85 119 DIN965 十字槽沉头螺钉cross recessed countersunk head screws ISO7046 GB819-85120 DIN966 十字槽半沉头螺钉cross recessed raised countersunk head screws ISO7047 GB820-85121 DIN970 六角头螺母hexagon nuts type-1122 DIN971 六角头螺母hexagon nuts type-2123 DIN972 细牙六角头螺母(2型) hexagon nuts with fine thread ISO8674 GB6176-86124 DIN975 牙条(全螺纹) threaded rods(studdings) GB15389-94125 DIN976 螺纹销threaded pins(stud bolts)126 DIN979 六角头开槽薄螺母（2型）hexagon thin slotted and castle nuts127 DIN980 全金属六角锁紧螺母（1型）prevailling torque type hexagon nuts,all metall nuts ISO7199 GB6184-86128 DIN981 圆螺母locknuts ISO2982 GB812-88129 DIN982 六角头尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type ,with nylon insert ISO7040 GB889.1-86130 DIN985 六角头薄型尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type ,with nylon insert ISO10511 GB6172.2-86131 DIN986 六角盖型尼龙锁紧螺母prevailling torque typedomed capnuts with nylon insert132 DIN988 配合垫片shim rings133 DIN1052 木材连接用垫片washers for timber connectors134 DIN1151 沉头钢钉round plain head nails135 DIN1440 销钉专用垫片A型plain washers for clevis pins(A型) ISO8738136 DIN1441 销钉专用垫片plain washers for clevis pins137 DIN1444 带头销钉clevis pins with head ISO2341138 DIN1471 圆锥型槽销grooved pins,taper grooved ISO8744 GB/T13829.2139 DIN1472 圆锥型槽销(半槽) grooved pins,taper grooved half length ISO8745 GB/T13829.2 140 DIN1473 平行槽销(带倒角) grooved pins,parallel grooved full length ISO8740141 DIN1474 前端凹槽槽销grooved pins,reserve grooved half length ISO8741142 DIN1475 中部凹槽槽销grooved pins,centre grooved ISO8742143 DIN1476 圆头槽销grooved pins with round head ISO8746 GB/T13829.3144 DIN1477 沉头槽销grooved pins with countersunk head ISO8747145 DIN1479 六角螺母棒turnuckles(centre parts),made out of hexagon bar146 DIN1480 花篮螺栓turnuckles with eye bolt and hook bolt147 DIN1481 弹性圆柱销spring pins,heavy type ISO8752 GB879-86148 DIN1587 组合式盖型螺母hexagon domed cap nuts GB802-88149 DIN1804 开槽圆螺母（配合沟头扳手）slotted round nuts for hook spanner150 DIN1816 圆螺母（带插销孔）round nuts with set holes151 DIN2093 盘型弹簧垫圈disc springs152 DIN3017 喉箍hose clamps153 DIN3404 润滑油嘴（旋扭头）lubricating nipples,button head154 DIN3567 管夹shackles for conduilts155 DIN3570 U型螺栓stirrup bolts(U-bolts)156 DIN6319 球面垫圈spherical washers,conical seats GB849-88157 DIN6325 圆柱销parallel pins ISO8734158 DIN6330 厚六角螺母hexagon nuts ,1.5d GB56-88159 DIN6331 厚六角法兰面螺母hexagon nuts ,1.5d with collar GB6177-86160 DIN6334 长六角螺母hexagon nuts ,3d161 DIN6797-A 外齿锁紧垫圈external teeth lock washers GB862.1-87162 DIN6797-I 内齿锁紧垫圈internal teeth lock washers GB861.1-87163 DIN6798-A 外锯齿锁紧垫圈external teeth serrated lock washers GB862.2-87164 DIN6798-I 内锯齿锁紧垫圈internal teeth serrated lock washers GB861.2-87165 DIN6799 开口挡圈retaining rings for shafts(E-rings),circlips GB896-76166 DIN6885 平键（A型）parallel keys(form A ) ISO773/2491167 DIN6888 半圆键woodruff keys ISO3912168 DIN6899 嵌环（支撑环）thimbles169 DIN6900 机器螺钉和垫圈组合件screws and washers assemblies GB9074.1-.17170 DIN6901 自攻螺钉和垫圈组合件tapping screws and washers assemblies GB9074.18-.23 171 DIN6912 薄型带孔内六角圆柱头螺钉hexagon socket head cap screws with hole,low head 172 DIN6914 大六角头螺栓hexagon head bolts with large head(friction grip bolts)173 DIN6915 大六角螺母hexagon nuts with large wideth across flat(friction grip nuts)174 DIN6916 大垫圈round washers for friction grip bolts175 DIN6917 楔型方垫圈spuare taper washers for friction grip bolts on T-sections176 DIN6923 六角法兰面螺母hexagon flange nuts ISO4161 GB6177-86177 DIN6925 全金属六角锁紧螺母(2型）prevailing torque type hexagon nuts,all metallic nuts ISO7042 GB6185.1-2000178 DIN7337 开口型抽芯铆钉（沉头、扁圆头）blind rivets GB12617/12618179 DIN7338 扁平头半空心/全空心铆钉rivets for brake and clutch lining GB875/975-86180 DIN7343 螺旋夹紧销spiral pins ISO8750181 DIN7346 轻型弹性圆柱销spring pins,light type ISO13337182 DIN7349 重型弹性圆柱销用垫圈washers for bolts with heavy type spring pinss183 DIN7500 ISO公制螺纹螺钉(多种头型) threadforming screws for ISO-metric thread184 DIN7504 自攻自钻螺钉(多种头型) self-drilling tapping screws185 DIN7513 开槽切削螺纹螺钉(多种头型) thread cutting screws186 DIN7516 十字槽切削螺纹螺钉(多种头型) thread cutting screws cross recess187 DIN7965 T型四爪螺母tee nuts with pronge188 DIN7968 钢结构用六角头螺栓连接副hexagon head fitted bolts for steel structures GB1228/1229/1230189 DIN7971 开槽盘头自攻螺钉pan head tapping screws with slot ISO1481 GB5282-85190 DIN7972 开槽沉头自攻螺钉countersunk flat head tapping screws with slot ISO1482 GB5283-85191 DIN7973 开槽半沉头自攻螺钉raised countersunk oval head tapping screws with slot ISO1483 GB5284-85192 DIN7976 六角头自攻螺钉hexagon tapping screws ISO1479 GB5285-85193 DIN7980 圆柱头螺钉用弹簧垫圈spring lock washers for screws with cylindrical heads ISO8738194 DIN7981 十字槽盘头自攻螺钉pan head tapping screws with cross recessed ISO 7049 GB845-85195 DIN7982 十字槽沉头自攻螺钉countersunk flat head tapping screws with cross recessed ISO7050 GB846-85196 DIN7983 十字槽半沉头自攻螺钉raised countersunk oval head tapping screws with cross recessed ISO7051 GB847-86197 DIN7984 薄型内六角圆柱头螺钉hexagon socket head cap screws with，reduced head198 DIN7985 十字槽盘头螺钉pan head screws with cross recessed ISO7045 GB818-85199 DIN7989 钢结构用垫圈washers for steel structures GB1230-84200 DIN7990 钢结构用六角头螺栓hexagon head bolts for steel structures GB1229-84201 DIN7991 内六角沉头螺钉hexagon socket countersunk head screws ISO10642202 DIN7993 轴用钢丝挡圈roundwire snap rings for shafts GB895.2-86203 DIN7995 十字槽半沉头木螺钉cross recessed raised countersunk head wood screws GB952-86204 DIN7996 十字槽圆头木螺钉cross recessed round head wood screws GB950-86205 DIN7997 十字槽沉头木螺钉cross recessed countersunk head wood screws GB951-86206 DIN8140 螺纹护套（普通\自锁等）ciol inserts,coarse,fine thread,silf locking207 DIN9021 大外径垫圈washers,outside diameter appro.3d ISO7093 GB96-85208 DIN11024 弹簧卡子spring cotter for a bolt209 DIN13257 平板螺栓belting bolts (elevator bolts)210 DIN18182 干壁钉（墙板钉）dry wall screws211 DIN28129 环型螺母lifting nuts(eye nuts) GB63-88212 DIN70952 圆螺母用止退垫圈tab washers for slotted round nuts GB858-88。
中外紧固件对照表
德国标准和国际标准、中国标准中英文对照表发布日期：2007-03-14 浏览次数：829德国标准和国际标准、中国标准中英文对照表序号德国标准中文品名英文品名国际标准中国标准Item DIN-Standard Description in Chinese Description in English ISO-Standard GB-Standard 1DIN1圆锥销taper pins ISO2339GB117 2DIN7圆柱销parallel pins ISO2338GB119-86 3DIN84开槽圆柱头螺钉slotted cheese head screws ISO1207GB65-85 4DIN85开槽盘头螺钉slotted pan head screws ISO1580GB67-85 5DIN93单耳止动垫圈tab washers GB854 6DIN94开口销split cotter pins ISO1234GB91 7DIN95开槽半沉头木螺钉slotted raised csk head wood screws GB101 8DIN96开槽半圆头木螺钉slotted round head wood screws GB99 9DIN97开槽沉头木螺钉slotted countersunk head wood screws GB100 10DIN125-A平垫plain washers ISO7089GB97.1-85 11DIN125-B平垫(带倒角)mediun washers ISO7090GB97.2-85 12DIN126平垫plain washers ISO709113DIN127-A重型弹垫spring lock washers,tang ends GB7244 14DIN127-B标准弹垫spring lock washers,square ends GB93-87 15DIN128-A鞍形弹垫single coil spring lock washers GB7245-87 16DIN137-A弹簧止动垫圈curved spring washers17DIN137-B波形弹垫wave spring washers GB955 18DIN186T型方颈螺栓T-head bolts with square neck GB37-88 19DIN188T型双接头螺栓T-head bolts with double nip20DIN258螺纹圆锥销taper pins with threaded end ISO873721DIN261T型头螺栓T-head bolts22DIN315AF蝶型螺母(美制)wing nuts amercia form23DIN315DF蝶型螺母(德制)wing nuts germany form GB62-88 24DIN316AF蝶型螺钉(美制)wing screws amercia form25DIN317DF蝶型螺钉(德制)wing screws germany form26DIN319圆球型盖型螺母ball knobs27DIN404开槽带孔球面圆柱头螺钉slotted capstan screws GB832-88 28DIN417开槽长圆柱端紧定螺钉slotted set srews with full dog point ISO7435GB75-85 29DIN427开槽平端紧定螺钉(半牙)slotted set srews with chamfered end ISO2342GB73-85 30DIN431小六角特薄细牙螺母pipe nuts with thread GB808-88 31DIN432外舌止动垫圈external tap GB856-88 32DIN433小垫圈(用于圆柱头螺钉)washers for cheese head screws ISO7092GB848-95 33DIN434方斜垫圈(U型)square taper washers for U-section GB852-88 34DIN435方斜垫圈(I型)square taper washers for I-sections GB852-88 35DIN436方垫圈square washers36DIN438开槽凹端紧定螺钉slotted set with cup point ISO7436GB74-85 37DIN439六角薄螺母hexagon thin nuts ISO4035GB6172-86 38DIN439细牙六角薄螺母hexagon thin nuts ISO8675GB6173-86 39DIN440木螺钉专用垫圈rounds washers for wood constructions ISO709440DIN443密封帽sealing caps,push-in type41DIN444活节螺栓B 型eye bolts form B GB798-88 42DIN462内舌止动垫圈internal tab washers43DIN463双耳止动垫圈washers with two taps GB855-88 44DIN464滚花高头螺钉knurled thumb screws with collar GB834-88 45DIN465开槽滚花高头螺钉slotted knurled thumb screws with collar46DIN466滚花高螺母knurled thumb nuts with collar GB806-88 47DIN467滚花薄螺母knurled thumb thin nuts GB807-88 48DIN470锁紧垫圈sealing washers49DIN471轴用弹性挡圈retaining rings for shafts(external),circlips GB894.1-86 50DIN472孔用弹性挡圈retaining rings for bores(internal),circlips GB893.1-86 51DIN478方头带垫螺栓square head bolts with collar52DIN479方头圆柱底端螺栓square head bolts with half dog point53DIN480方头带垫半圆底端螺栓square head bolts with collar,half dog point and rounded end54DIN508T型槽螺母T-slot nuts ISO29955DIN525单头螺柱single end studs56DIN529地脚螺栓masonry bolts GB799-88 57DIN546带槽圆螺母slotted round nuts GB817-7658DIN547端面带孔圆螺母round nuts with drilled holes in one face GB815-88 59DIN551开槽平端紧定螺钉slotted sit screws with flat point ISO4776GB73-85 60DIN553开槽锥端紧定螺钉slotted set screws with cone point ISO7434GB71-85 61DIN555六角螺母hexagon nuts ISO403462DIN557方螺母-C square nuts GB39-88 63DIN558六角头螺钉hexagon screws ISO401864DIN561六角头圆柱端紧定螺钉hexagon set screws with full dog point65DIN562薄型方螺母-B square nuts without bevel(pressed nuts)66DIN571六角头木螺钉hexagon head wood screws (coach screws)GB102-86 67DIN580吊环螺钉lifting eye bolts ISO3266GB825-76 68DIN582吊环螺母lifting eye nuts69DIN601六角头螺栓hexagon bolts ISO401670DIN603大半圆头方颈螺栓(马车螺栓)mushroom head square neck bolts (carriagebolts)ISO8677GB14-8871DIN604沉头带插销马车螺栓flat countersunk nib bolts72DIN605沉头长方颈马车螺栓flat countersunk long square neck bolts73DIN607半圆头带插销马车螺栓cup head nib bolts74DIN608沉头短方颈马车螺栓flat countersunk short square neck bolts75DIN609六角头精配螺栓（长螺纹）hexagon fitted bolts,long thread76DIN610六角头精配螺栓（短螺纹）hexagon fitted bolts,short thread77DIN653滚花平头螺钉knurled thumb screws thin type GB835-88 78DIN660半圆头铆钉round head rivets ISO1051GB867-86 79DIN661沉头铆钉contersunk head rivets ISO1051GB869-86 80DIN662半沉头铆钉raised contersunk head rivets ISO105181DIN674大扁头铆钉mushroom head rivets ISO105182DIN703重型侧面带孔圆螺母adjusting rings,heavy range (shafting collars)83DIN705侧面带孔圆螺母adjusting rings,light range (shafting collars)GB816-88 84DIN741卡头wire rope clips85DIN787T型槽螺钉T-slot screws ISO29986DIN835双头螺柱（牙长=2D）studs-metal (end=2d)GB900-88 87DIN906内六角锥型闭锁螺钉hexagon socket pipe plugs,conical thread88DIN908内六角直型闭锁螺钉hexagon socket screw plugs,cyl. thread89DIN909外六角锥型闭锁螺钉hexagon head pipe plugs,conical thread90DIN910外六角直型闭锁螺钉hexagon head screw plugs,cyl.thread91DIN911内六角扳手socket wrenches ISO293692DIN912内六角圆柱头螺钉hexagon socket cap screws ISO4762GB70-8593DIN913内六角平端紧定螺钉hexagon socket set screws with flat point ISO4026GB77-8594DIN914内六角尖端紧定螺钉hexagon socket set screws with cone point ISO4027GB78-8595DIN915内六角圆柱端紧定螺钉hexagon socket set screws with dog point ISO4028GB79-8596DIN916内六角凹端紧定螺钉hexagon socket set screws with cup point ISO4029GB80-8597DIN917薄型盲螺母hexagon cap nuts98DIN920开槽小圆柱头螺钉slotted short cheese head screws99DIN921开槽大圆柱头螺钉slotted large cheese head screws GB838-88 100DIN923开槽圆柱头轴肩螺钉slotted pan head screws with shoulder GB830-88 101DIN927开槽无头轴肩螺钉slotted shoulder screws102DIN928焊接方螺母square weld nuts GB/T13680-92 103DIN929焊接六角螺母hexagon weld nuts GB/T13681-92 104DIN931六角头螺栓（半牙）hexagon head screws ISO4014GB5782-86 105DIN933六角头螺栓（全牙）hexagon head screws ISO4017GB5783-86 106DIN934六角头螺母(1型)hexagon full nuts ISO4032GB6170-86 107DIN934细牙六角头螺母(1型)hexagon full nuts ISO8673GB6171-86 108DIN935开槽六角螺母hexagon slotted and castle nuts ISO7035GB6178-86 109DIN936六角头薄螺母hexagon thin nuts ISO4035GB6172.1-86 110DIN937六角头开槽薄螺母hexagon thin slotted and castle nuts ISO7038GB6181-86 111DIN938双头螺距（牙长=1D）studs metal (end=1d)GB897-88 112DIN939双头螺距（牙长=1.25D）studs metal (end=1.25d)GB898-88 113DIN940双头螺距（牙长=1.5D）studs metal (end=1.5d)114DIN960六角头细牙螺栓（半牙）hexagon head bolts,metric fine pitch thread ISO8765GB5785-86 115DIN961六角头细牙螺栓（全牙）hexagon head bolts,metric fine pitch thread ISO8676GB5786-86 116DIN962头部穿孔六角头螺栓additional shapes and versions for bolts117DIN963开槽沉头螺钉slotted countersund head screws ISO 2009GB68-85118DIN964开槽半沉头螺钉slotted raised countersunk oval head screws ISO 2010GB69-85119DIN965十字槽沉头螺钉cross recessed countersunk head screws ISO7046GB819-85 120DIN966十字槽半沉头螺钉cross recessed raised countersunk head screws ISO7047GB820-85121DIN970六角头螺母hexagon nuts type-1122DIN971六角头螺母hexagon nuts type-2123DIN972细牙六角头螺母(2型)hexagon nuts with fine thread ISO8674GB6176-86 124DIN975牙条(全螺纹)threaded rods(studdings)GB15389-94 125DIN976螺纹销threaded pins(stud bolts)126DIN979六角头开槽薄螺母（2型）hexagon thin slotted and castle nuts127DIN980全金属六角锁紧螺母（1型）prevailling torque type hexagon nuts,all metallnutsISO7199GB6184-86128DIN981圆螺母locknuts ISO2982GB812-88129DIN982六角头尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type,with nylon insertISO7040GB889.1-86130DIN985六角头薄型尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type,with nylon insertISO10511GB6172.2-86131DIN986六角盖型尼龙锁紧螺母prevailling torque typedomed capnuts with nylon insert132DIN988配合垫片shim rings133DIN1052木材连接用垫片washers for timber connectors134DIN1151沉头钢钉round plain head nails135DIN1440销钉专用垫片A型plain washers for clevis pins(A型)ISO8738136DIN1441销钉专用垫片plain washers for clevis pins137DIN1444带头销钉clevis pins with head ISO2341138DIN1471圆锥型槽销grooved pins,taper grooved ISO8744GB/T13829.2 139DIN1472圆锥型槽销(半槽)grooved pins,taper grooved half length ISO8745GB/T13829.2 140DIN1473平行槽销(带倒角)grooved pins,parallel grooved full length ISO8740141DIN1474前端凹槽槽销grooved pins,reserve grooved half length ISO8741142DIN1475中部凹槽槽销grooved pins,centre grooved ISO8742143DIN1476圆头槽销grooved pins with round head ISO8746GB/T13829.3 144DIN1477沉头槽销grooved pins with countersunk head ISO8747145DIN1479六角螺母棒turnuckles(centre parts),made out of hexagon bar146DIN1480花篮螺栓turnuckles with eye bolt and hook bolt147DIN1481弹性圆柱销spring pins,heavy type ISO8752GB879-86 148DIN1587组合式盖型螺母hexagon domed cap nuts GB802-88 149DIN1804开槽圆螺母（配合沟头扳手）slotted round nuts for hook spanner150DIN1816圆螺母（带插销孔）round nuts with set holes151DIN2093盘型弹簧垫圈disc springs152DIN3017喉箍hose clamps153DIN3404润滑油嘴（旋扭头）lubricating nipples,button head154DIN3567管夹shackles for conduilts155DIN3570U型螺栓stirrup bolts(U-bolts)156DIN6319球面垫圈spherical washers,conical seats GB849-88157DIN6325圆柱销parallel pins ISO8734158DIN6330厚六角螺母hexagon nuts ,1.5d GB56-88159DIN6331厚六角法兰面螺母hexagon nuts ,1.5d with collar GB6177-86 160DIN6334长六角螺母hexagon nuts ,3d161DIN6797-A外齿锁紧垫圈external teeth lock washers GB862.1-87 162DIN6797-I内齿锁紧垫圈internal teeth lock washers GB861.1-87 163DIN6798-A外锯齿锁紧垫圈external teeth serrated lock washers GB862.2-87 164DIN6798-I内锯齿锁紧垫圈internal teeth serrated lock washers GB861.2-87 165DIN6799开口挡圈retaining rings for shafts(E-rings),circlips GB896-76166DIN6885平键（A型）parallel keys(form A )ISO773/2491167DIN6888半圆键woodruff keys ISO3912168DIN6899嵌环（支撑环）thimbles169DIN6900机器螺钉和垫圈组合件screws and washers assemblies GB9074.1-.17 170DIN6901自攻螺钉和垫圈组合件tapping screws and washers assemblies GB9074.18-.23171DIN6912薄型带孔内六角圆柱头螺钉hexagon socket head cap screws with hole,low head172DIN6914大六角头螺栓hexagon head bolts with large head(friction grip bolts)173DIN6915大六角螺母hexagon nuts with large wideth across flat(friction grip nuts)174DIN6916大垫圈round washers for friction grip bolts175DIN6917楔型方垫圈spuare taper washers for friction grip bolts on T-sections176DIN6923六角法兰面螺母hexagon flange nuts ISO4161GB6177-86177DIN6925全金属六角锁紧螺母(2型）prevailing torque type hexagon nuts,all metallicnutsISO7042GB6185.1-2000178DIN7337开口型抽芯铆钉（沉头、扁圆头）blind rivets GB12617/12618179DIN7338扁平头半空心/全空心铆钉rivets for brake and clutch lining GB875/975-86 180DIN7343螺旋夹紧销spiral pins ISO8750181DIN7346轻型弹性圆柱销spring pins,light type ISO13337182DIN7349重型弹性圆柱销用垫圈washers for bolts with heavy type spring pinss183DIN7500ISO公制螺纹螺钉(多种头型)threadforming screws for ISO-metric thread184DIN7504自攻自钻螺钉(多种头型)self-drilling tapping screws185DIN7513开槽切削螺纹螺钉(多种头型)thread cutting screws186DIN7516十字槽切削螺纹螺钉(多种头型)thread cutting screws cross recess187DIN7965T型四爪螺母tee nuts with pronge188DIN7968钢结构用六角头螺栓连接副hexagon head fitted bolts for steel structures GB1228/1229/1230 189DIN7971开槽盘头自攻螺钉pan head tapping screws with slot ISO1481GB5282-85190DIN7972开槽沉头自攻螺钉countersunk flat head tapping screws with slot ISO1482GB5283-85191DIN7973开槽半沉头自攻螺钉raised countersunk oval head tapping screws withslotISO1483GB5284-85192DIN7976六角头自攻螺钉hexagon tapping screws ISO1479GB5285-85193DIN7980圆柱头螺钉用弹簧垫圈spring lock washers for screws with cylindricalheadsISO8738194DIN7981十字槽盘头自攻螺钉pan head tapping screws with cross recessed ISO 7049GB845-85195DIN7982十字槽沉头自攻螺钉countersunk flat head tapping screws with crossrecessedISO7050GB846-85196DIN7983十字槽半沉头自攻螺钉raised countersunk oval head tapping screws withcross recessedISO7051GB847-86197DIN7984薄型内六角圆柱头螺钉hexagon socket head cap screws with，reduced head198DIN7985十字槽盘头螺钉pan head screws with cross recessed ISO7045GB818-85199DIN7989钢结构用垫圈washers for steel structures GB1230-84 200DIN7990钢结构用六角头螺栓hexagon head bolts for steel structures GB1229-84 201DIN7991内六角沉头螺钉hexagon socket countersunk head screws ISO10642GB/T70.3-2000 202DIN7993轴用钢丝挡圈roundwire snap rings for shafts GB895.2-86203DIN7995十字槽半沉头木螺钉cross recessed raised countersunk head woodscrewsGB952-86204DIN7996十字槽圆头木螺钉cross recessed round head wood screws GB950-86205DIN7997十字槽沉头木螺钉cross recessed countersunk head wood screws GB951-86 206DIN8140螺纹护套（普通\自锁等）ciol inserts,coarse,fine thread,silf locking207DIN9021大外径垫圈washers,outside diameter appro.3d ISO7093GB96-85 208DIN11024弹簧卡子spring cotter for a bolt209DIN13257平板螺栓belting bolts (elevator bolts)210DIN18182干壁钉（墙板钉）dry wall screws211DIN28129环型螺母lifting nuts(eye nuts)GB63-88 212DIN70952圆螺母用止退垫圈tab washers for slotted round nuts GB858-88。
紧固件中国和德国标准对照表
94 95 96 97 98 99
DIN914 DIN915 DIN916 DIN917 DIN920 DIN921
Hexagon socket set screws with cone point Hexagon socket set screws with dog point Hexagon socket set screws with cup point Hexagon cap nuts Slotted short cheese head screws Slotted large cheese head screws
英文品名 Desciption in English Taper pins Parallel pins Slotted cheese head screws Slotted pan head screws Tab washers Split cooter pins Slotted raised csk head wood screws Slotted round head wood screws Slotted countersunk head wood screws Plain washers Mediun washers Plain washers Spring lock washers,tang ends Spring lock washers,square ends Single coil spring lock washers Curved spring washers Wave spring washers T-head blots with square neck T-head bolts with double nip Taper pins with threaded end T-head bolts Wing nuts America form Wing nuts germany form Wing screws America form Wing screws germany form Ball knobs Slotted capstan screws
德国螺丝标准
德国螺丝标准ICS 21.060.10Zylinderschrauben mit Innensechskant –Niedriger Kopf, mit SchlüsselführungIn keeping with current practice in standards published by the International Organization for Standardization (ISO), a comma has been used throughout as the decimal marker.Ref.No.DIN 6912:2002-12English price group 07Sales No.010709.03DEUTSCHE NORM December 20026912{No part of this translation may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH , 10772Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Translation by DIN-Sprachendienst.In case of doubt, the German-language original should be consulted as the authoritative text.Hexagon socket thin head cap screws withpilot recessContinued on pages 2 to 8.ForewordThis standard has been prepared by Technical Committee Schrauben m it Innenantrieb of the Normen-ausschuss Mechanische Verbindungselemente (Fasteners Standards Committee).The DIN 4000-2-1.2 tabular layout of article characteristics shall apply to screws covered in this standard.Amendments This standard differs from the May 1985 edition as follows:a)Hexagon socket head cap screws may now also be made of grade A4 stainless steel.b)For stainless steel screws, the range of sizes assigned to property class 70 has been changed.c)Minimum ultimate tensile loads have been specified.d)References have been updated.Previous editionsDIN 6912:1954x-03, 1967-12, 1985-05.All dimensions are in millimetres.1ScopeThis standard specifies dimensions and technical delivery conditions for sizes M4 to M36 hexagon sockethead cap screws with pilot recess, of product grade A and made of steel, stainless steel or nonferrous metal.Where screws are to comply with specifications other than those given in this standard, these shall be selected in accordance with the relevant standards (e.g. DIN EN 28839, DIN EN ISO 898-1,DIN EN ISO 3506-1, DIN EN ISO 4759-1, DIN ISO 261, and DIN ISO 965-2).Screws specified in this standard should not be used in the form of screw assemblies with captive washers as they are always required to have a short unthreaded portion of shank to compensate for the pilot recess.SupersedesMay 1985 edition.Page2DIN6912:2002-122Normative referencesThis standard incorporates, by dated or undated reference, provisions from other publications. These norma-tive references are cited at the appropriate places in the text, and the titles of the publications are listed below. For dated references, subsequent amendments to or revisions of any of these publications apply to this standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies.DIN962Designation system for fastenersDIN4000-2Tabular layouts of article characteristics for bolts, screws and fit boltsDIN EN20225Bolts, screws, studs and nuts – Symbols and designations for dimensioning(ISO225:1983)DIN EN26157-3Fasteners – Surface discontinuities – Part3: Bolts, screws and studs for special require-ments (ISO6157-3:1988)DIN EN28839Mechanical properties of fasteners – Bolts, screws, studs and nuts made of non-ferrous metals (ISO8839:1986) DIN EN ISO898-1Mechanical properties of fasteners made of carbon steel and alloy steel – Part1: Bolts, screws and studs (ISO898-1:1999)DIN EN ISO3269Fasteners – Acceptance inspection (ISO3269:2000)DIN EN ISO3506-1Mechanical properties of corrosion-resistant stainless steel fasteners – Part1: Bolts, screws and studs (ISO3506-1:1997)DIN EN ISO4042Fasteners – Electroplated coatings (ISO4042:1999)DIN EN ISO4753Fasteners – Ends of parts with external ISO metric screw thread (ISO4753:1999)DIN EN ISO4759-1Tolerances for fasteners – Part1: Bolts, screws and nuts – Product grades A, B and C (ISO4759-1:2000) DIN EN ISO10683Fasteners – Non-electrolytically applied zinc flake coatings (ISO10683:2000)DIN ISO261ISO general purpose metric screw threads – General plan (ISO261:1998)DIN ISO965-2ISO general purpose metric screw threads – Tolerances – Part2: Limits of sizes for gen-eral purpose external and internal screw threads – Medium quality (ISO965-2:1998) ISO8992:1986Fasteners – General requirements for bolts, screws, studs and nutsPage 3DIN 6912:2002-123DimensionsScrew dimensions shall be as given in figure 1 and table 1.See DIN EN 20225 for symbols.Maximum underhead fillet l f max = 1,7 r maxd a,max –d s,max r max =2For r min , see table 1.Detail XKey to figure 1)End chamfered (cf. DIN EN ISO 4753).2)Length of incomplete thread, u : 2 P maximum.3)Slight rounding or countersinking at the mouth of the socket is permitted (no further than e ).4)Top edge of head rounded or chamfered (optional).5)Bottom edge of head may be rounded or chamfered to d w , but shall always be free from burr.6)Datum for d w .7)d s applies if values of l s min are specified.Figure 1:Screw dimensions (notation)1)2)7)3)6)5)4)XPage 4DIN 6912:2002-12Tabl e 1:Screw dimensionsThread size (d )Reference dimension2)3)4)Max. = nominal sizeMin. = nominal size Max. = nominal sizeMax. = nominal sizeNominal sizeNominal size1)5)6)Shank length, l s , and grip length, l gNominal sizeNOTE: Use of sizes in brackets should be avoided.1)Thread pitch.2)For lengths, l , of 125 mm or less.3)For lengths, l , above 125 mm up to 200 mm.4)For lengths, l , exceeding 200 mm.5)emin = 1,14 s min .6)Commercial sizes of screws are those for which lengths l s and l ghave been specified. Nominal lengths, l , exceeding200 mm shall be graded in 20 mm steps.For screws with lengths above the dashed line, the maximum distance between the last fully formed thread and the bearingface, l g , shall be equal to 5 P . For lengths below the line, l g and l s are to be calculated using the following equations:l g max = l nom – b ; l smin = l g max – 5 P .(continued)Page 5DIN 6912:2002-12Table 1(concluded)Thread size (d )Reference dimension2)3)4)Max. = nominal sizeMin. = nominal size Max. = nominal sizeMax. = nominal sizeNominal sizeNominal size1)5)6)Nominal sizeFor footnotes, see page 4.Shank length, l s , and grip length, l gPage 6DIN 6912:2002-12MaterialSteelStainless steel Nonferrous metalGeneral requirements As specified in ISO 8992.ThreadTolerance 6gAs specified in DIN ISO 261 and DIN ISO 965-2.For sizes up to Property class 1)8.8M24: A2-70 or CuZn 2)(material)A4-70; for larger sizes: A2-50.As specified inDIN EN ISO 898-1.DIN EN ISO 3506-1.DIN EN 28839.Product grade AAs specified inDIN EN ISO 4759-1.As processed.Plain PlainDIN EN ISO 4042DIN EN ISO 4042applies with regard applies with regard to electroplating.to electroplating.DIN EN ISO 10683applies with regard to zinc flake coatings.DIN EN 26157-3applies with regard to limits for surface discontinuities.Acceptance As specified in DIN EN ISO 3269.inspection1)See clause 5 for tensile strength requirements.2)CU2 or CU3 grade copper-zinc alloy, at the manufacturer’s discretion.4Technical delivery conditionsTable 2:Technical delivery conditionsMechanical propertiesLimit deviations and geometrical tolerancesSurface finishSurfacediscontinuities 5Reduced strength5.1Screws made of steel (other than stainless)When tested as specified in DIN EN ISO 898-1 (test programme B), steel screws covered by this standard may not fulfill the tensile strength requirements for property class 8.8. All other requirements shall be met.When testing full-size screws, the loads given in table 4 shall be applied. Any failure shall occur in the shank,along the free threaded length or at the head/shank transition.Page 7DIN6912:2002-12 Table3:Minimum ultimate tensile loads for steel screws of property class 8.8(equal to 80% of the loads required in DIN EN ISO898-1)Thread size (d)M4M5M6M8M10M12M14 Minimum ultimate tensile562090801290023400371005390073600 load, in N Thread size (d)M16M18M20M22M24M27M30 Minimum ultimatetensile100000127000162000202000234000309000373000 load, in NThread size (d)M33M36Minimum ultimate tensile461000542000load, in N5.2Stainless steel screwsIn the case of stainless steel screws, the tensile strength shall be equal to 80% of the values specified in DIN EN ISO3506-1.5.3Nonferrous metal screwsIn the case of nonferrous metal screws, the minimum breaking load shall be equal to 80% of the values specified in DINEN28839.6DesignationDesignation of an M12 hexagon socket thin head cap screw (M12) with pilot recess, with a nominal length, l, of 60 mm (60), of property class 8.8:Screw DIN6912 – M12 é 60 – 8.8See DIN962 for supplementary order designations for special screw types and finishes.Page 8DIN 6912:2002-12Annex AMass of steel screwsThread size (d )Nominal length, lApprox. mass, in kg, per 1 000 unitsM4M5M6M8M10M12M14M16M18M20M22M24M27M30M33M36Thread size (d )Nominal length, lApprox. mass, in kg, per 1 000 units 10121620253035405060708090100110120130140253035405060708090100110120130140150160170180190200 NOTE:The values of mass specified for the commercial sizes are for guidance only.。
中德及国际标准螺丝标准对应表
序号中文品名德国标准DIN中国标准GB国际标准ISO英文品名1自攻自钻螺钉多种头型DIN7504GB15856.1-4Self-drilling tapping screws2平垫DIN125-A GB97.1-85ISO7089Plain washers3平垫（带倒角）DIN125-B GB97.2-85ISO7090Mediun washers4平垫DIN126ISO7091Plain washers5重型弹垫DIN127-A GB7244Spring lock washers,tang ends 6标准弹垫DIN127-B GB93-87Spring lock washers,square ends 7内六角扳手DIN911ISO2936Socket wrenches8内六角圆柱头螺钉DIN912GB70-85ISO4762Hexagon socket cap screws9内六角平端紧定螺钉DIN913GB77-85ISO4026Hexagon socket set screws with falt point10内六角尖端紧定螺钉DIN914GB78-85ISO4027Hexagon socket set screws with cone point11内六角圆柱端紧定螺钉DIN915GB79-85ISO4028Hexagon socket set screws with dog point12内六角凹端紧定螺钉DIN916GB80-85ISO4029Hexagon socket set screws with cup point13六角头螺栓）（半牙）DIN931GB5782-86ISO4014Hexagon head screws 14六角头螺栓（全牙）DIN933GB5783-86ISO4017Hexagon head screws15开槽沉头螺钉DIN963GB68-85ISO2009Slottedｃｏｕｎｔersund head screws16开槽半沉头螺钉DIN964GB69-85ISO2010Slotted raisedｃｏｕｎｔersunk oval head screws17十字槽沉头螺钉DIN965GB819-85ISO7046Cross recessedｃｏｕｎｔersunk head screws18十字槽半沉头螺钉DIN966GB820-85ISO7047Cross recessed raised19十字槽盘头自攻螺攻DIN7981GB845-85ISO7049Pan head tapping screws with cross recessed20十字槽沉头自攻螺攻DIN7982GB846-85ISO7050ｃｏｕｎｔersunk flat head tapping screws with cross21十字槽半沉头自攻螺攻DIN7983GB847-86ISO7051Raisedｃｏｕｎｔersunk oval head tapping screws with cross22开槽盘头自攻螺钉DIN7971GB5282-85ISO1481Pan head tapping screws with slot23开槽沉头自攻螺钉DIN7972GB5283-85ISO1482ｃｏｕｎｔersunk flat head tapping screws with slot24开槽半沉头自攻螺钉DIN7973GB5284-85ISO1483Raised sountersunk oval head tapping screws with slot25六角头自攻螺钉DIN7976GB5285-85ISO1479Hexagon tapping screws26十字槽盘头螺钉DIN7985GB818-85ISO7045Pan head screws with cross recessed27内六角沉头螺钉DIN7991ISO10642Hexagon socket coutersunk head screws28六角头尼龙锁紧螺母DIN982GB812-88ISO2982Prevailing rorque type hexagon nuts,heavy type,with nylon29六角头薄型尼龙锁紧螺母DIN985GB889.1-86ISO7040Prevalling torque type hoxagon nuts,heavy type,with nylon30六角盖型尼龙锁紧螺母DIN986GB6172.2-86ISO10511Preailling torque typedomed capnuts with nylonｉｎｓｅｒｔ中德螺丝标准对应表31六角头螺母（1型）DIN934GB6170-86ISO4032Hexagon full nuts 32细牙六角头螺母（1型）DIN934GB6171-86ISO8673Hexagon full nuts 33六角头薄螺母DIN936GB6172.1-86ISO4035Hexagon thin nuts 34六角薄螺母DIN439GB6172-86ISO4035Hexagon thin nuts35开槽半沉头木螺钉DIN95GB101Slotted raised csk head wood screws36开槽半圆头木螺钉DIN96GB99Slotted round head wood screws37开槽沉头木螺钉DIN97GB100Slottedｃｏｕｎｔersunk head wood screws38鞍形弹垫DIN128-A GB7245-87Single coil spring lock washers 39弹簧止动垫圈DIN137-A Curved spring washers40波形弹垫DIN137-B GB955Wave spring washers41T型方颈螺栓DIN186GB37-88T-head blots with square neck 42T型双接头螺栓DIN188T-head bolts with double nip43螺纹圆锥销DIN258ISO8737Taper pins with threaded end44T型头螺栓DIN261T-head bolts45蝶型螺母（美制）DIN315AF Wing nuts America form46蝶型螺母（德制）DIN315DF GB62-88Wing nuts germany form47蝶型螺母（美制）DIN316AF Wing screws America form48蝶型螺母（德制）DIN317DF Wing screws germany form49圆球型盖型螺母DIN319Ball knobs50开槽带孔球面圆柱头蚴钉DIN404GB832-88Slotted capstan screws51开槽长圆柱端紧定螺钉DIN417GB75-85ISO7435Slotted set srews with full dog point52开槽平端紧定螺钉（半牙）DIN427GB73-85ISO2342Slotted set srews with chamfered end53小六角特薄细牙螺母DIN431GB808-88Pip nuts with thread54外舌止动垫圈DIN432GB856-88External tap55小垫圈(用于圆柱头螺钉)DIN433GB848-95ISO7092Washers for cheese head screws 56方斜垫圈（U型）DIN434GB852-88Square taper washers for57方斜垫圈（I型）DIN435GB852-88Square taper washers for58方垫圈DIN436Square washers59开槽凹端紧定螺钉DIN438GB74-85ISO7436Slotted set with cup point60细牙六角薄螺母DIN439GB6173-86ISO8675Hexagon thin nuts61木螺钉专用垫圈DIN440ISO7094Rounds washers for wood constructions62密封帽DIN443Sealing caps,push-in type63活节螺栓B型DIN444GB798-88Eye bolts form B64内舌止动垫圈DIN462Internal tab washers65双耳止动垫圈DIN463GB855-88Washers with two taps66滚花高头螺钉DIN464GB834-88Knurled thumb screws with collar67开槽滚花高头螺钉DIN465Slotted knurled thumb screws with collar68滚花高螺母DIN466GB806-88Knurled thumb nuts with collar 69滚花薄螺母DIN467GB807-88Knurled thumb thin nuts70锁紧垫圈DIN470Sealing washers71轴用弹性垫圈DIN471GB893-86Retaining rings for shafts(external),circlips72孔用弹性垫圈DIN472GB893.86Retaining rings for bores(internal),circlips73方头带垫螺栓DIN478Square head bolts with collar74方头圆柱底端螺栓DIN479Square head bolts with half dog point75方头带垫关圆底端螺栓DIN480Square head bolts with collar,half dog point76T型槽螺母DIN508ISO299T-slot nuts77单头螺柱DIN525Single end studs 78地脚螺栓DIN529GB799-88Masonry bolts79带槽圆螺母DIN546GB817-76Slotted round nuts80端面带孔圆螺母DIN547GB815-88Round nuts with drilled holes in one face81开槽平端紧定螺钉DIN551GB73-85ISO4776Slotted set screws with flat point82开槽锥端紧定螺钉DIN553GB71-85ISO7434Slotted set screws with cone point83六角螺母DIN555ISO4034Hexagon nuts 84方螺母-C DIN557GB39-88Square nuts85六角头螺钉DIN558ISO4018Hexagon screws86六角头圆柱端紧定螺钉DIN561Hexagon set screws with full dog point87薄型方螺母-B DIN562Square nuts without bevel 88六角头木螺钉DIN571GB102-86Hexgon head wood screw89吊环螺钉DIN580GB825-76ISO3266Lifting eye bolts90吊环螺母DIN582Lifting eye nuts91六角头螺栓DIN601ISO4016Hexagon blots92大半圆头方颈螺栓（马车螺栓）DIN603GB14-88ISO8677Mushroom head square neckbolts(carriage bolts)93沉头带插销马车螺栓DIN604Flatｃｏｕｎｔersunk nib bolts94沉头长方颈马车螺栓DIN605Flatｃｏｕｎｔersunk long squareneck bolts95半圆头带插销马车螺栓DIN607Cup head nib bolts96沉头短方颈马车螺栓DIN608Flatｃｏｕｎｔersunk short square neck bolts97六角头精配螺栓（长螺纹）DIN609Hexagon fitted bolts,long thread 98六角头精配螺栓（短螺栓）DIN610Hexagon fitted bolts short thread 99滚花平头螺钉DIN653GB835-88Knurled thumb screws thin type 100半圆头铆钉DIN660GB867-86ISO1051Round head rivets101沉头铆钉DIN661GB869-86ISO1051Contersunk head rivets102半沉头铆钉DIN662ISO1051Raised contersunk head rivets103大扁头铆钉DIN674ISO1051Mushroom head rivets104重型侧面带孔圆螺母DIN703Adjusting rings,heavy range(shafting collars)105侧面带孔圆螺母DIN705GB816-88Adjusting rings,light range(shafting collars)106卡头DIN741Wire rope clips107T型槽螺钉DIN787ISO299T-slot screws108双头螺柱（牙长=2D）DIN835GB900-88Studs-metal(end=2d)109内六角锥型闭锁螺钉DIN906Hexagon socket pipe plugs,conical thread110内六角直型闭锁螺钉DIN908Thread 111外六角锥型闭锁螺钉DIN909Thread112外六角直型闭锁螺钉DIN910Hexagon head screw plugs,cyl.thread113薄型盲螺母DIN917Hexagon cap nuts114开槽小圆柱头螺钉DIN920Slotted short cheese head screws 115开槽大圆柱头螺钉DIN921GB838-88Slotted large cheese head screws116开槽圆柱头轴肩螺钉DIN923GB830-88Slotted pan head screw with shoulder117开槽无头轴肩螺钉DIN927Slotted shoulder screws118焊接方螺母DIN928GB/T13680-92Square weld nuts119焊接六角螺母DIN929GB/T13681-92Hexagon weld nuts120六角头螺母DIN970Hexagon nuts type-1121六角头螺母DIN971Hexagon nuts type-2122细牙六角头螺母（2型）DIN972Hexagon nuts with fine thread123开槽六角螺母DIN935GB6178-86ISO7035Hexagon slotted andｃａｓｔle nuts124六角头开槽薄螺母DIN937GB6181-86ISO7038Hexagon thin slotted and caslte nuts125双头螺距（牙长=1D）DIN938GB897-88Studs metal(end=1d) 126双头螺距（牙长=1.5D DIN939GB898-88Studs metal(end=1.25d)127双头螺距（牙长=1.25D DIN940Studs metal(end=1.5d)128六角头细牙螺栓（全牙）DIN960GB5785-86ISO8765Hexagon head bolts,metric fine pitch thread129六角头细牙螺栓（半牙）DIN961GB8786-86ISO8676Hexagon head bolts,metric fine pitch thread130头部穿孔六角头螺栓DIN962Additional shapes and versions for bolts131牙条（全螺纹）DIN975GB6176-86ISO8674Threaded rods(studdings) 132螺纹销DIN976GB15389-94Threaded pins(stud bolts)133六角头开槽薄螺母2型DIN979Hexagon thin slotted andｃａｓｔle nuts134全金属六角锁紧螺母1型DIN980Prevaillng rorque type hexagon nuts,all metal nuts135圆螺母DIN981GB6184-86ISO7199Locknuts136配合垫片DIN988Shim rings137木材连接用垫片DIN1052Washers for timber connectors 138沉头钢钉DIN1151Round plain head nails139销钉专用垫片A型DIN1440ISO8738Plain washers for clevis pins(A) 140销钉专用垫片DIN1441Plain washers for clevis pins 141带头销钉DIN1444ISO2341Clevis pins with head142圆锥型槽销DIN1471GB/T13829.2ISO8744Grooved pins,taper grooved143圆锥型槽销（半槽）DIN1472GB/T13829.2ISO8745Grooved pins,taper grooved half length144平行槽销（带倒角）DIN1473ISO8740Grooved pins,parallel grooved full length145前端凹槽槽销DIN1474ISO8741Grooved pins,reverve grooved half length146中部凹槽槽销DIN1475ISO8742Grooved pins,center grooved 147圆头槽销DIN1476ISO8746Grooved pins with round head148沉头槽销DIN1477ISO8747Grooved pins withｃｏｕｎｔersunk head149六角螺母棒DIN1479Turnuckles(center parts),made out of hexagon bar150花蓝螺栓DIN1480Turnuckles with eye bolt and hook bolt151弹性圆柱销DIN1481GB879-86ISO8752Spring pins,heavy type 152组合式盖型螺母DIN1587GB802-88Hexagon domed cap nuts153开槽圆螺母(配合沟头扳手)DIN1804Slotted round nuts for hook spammer154圆螺母（带插销孔）DIN1816Round nuts with set holes155盘型弹簧垫圈DIN2093Disc springs156喉箍DIN3017Hose clamps157润滑油嘴（旋扭头）DIN3404Lubricating nipples,button head 158管夹DIN3567Shackles for conduilts159U型螺栓DIN3570Stirrup bolts(U-bolts)160球面垫圈DIN6319GB849-88Spherical washers,conical seats 161圆柱销DIN6325ISO8734Parallel pins162厚六角螺母DIN6330GB56-88Hexagon nuts,1.5d163厚六角法兰面螺母DIN6331GB6177-86Hexagon nuts,1.5d with collar 164长六角螺母DIN6334Hexagon nuts,3d165外齿锁紧垫圈DIN6797-A GB862.1-87External teeth lock washers166内齿锁紧垫圈DIN6797-I GB861.1-87Internal teeth lock washers167外锯齿锁紧垫圈DIN6798-A GB862.2-87External teeth serrated lock washers168内锯齿锁紧垫圈DIN6798-I GB861.2-87Internal teeth serrated lock washers169开口挡圈DIN6799GB896-76Retaining rings for shafts(E-rings),circlips170平键（A型）DIN6885ISO773/2491Parallel keys(form A)171半圆键DIN6888ISO3912Woodruff keys172嵌环（支撑环）DIN6899Thimbles173机器螺钉和垫圈组合件DIN6900Screws and washers assemblies174自攻螺钉和垫圈组合件DIN6901GB9074.1-17Tapping screws and washer assemblies175薄型带孔内六角圆柱螺钉DIN6912GB9074.18-23Hexagon cocket head cap screwswith hole,low head176大六角头螺栓DIN6914Hexagon head bolts with large head177大六角螺母DIN6915Hexagon nuts with large wideth across flat178大垫圈DIN6916Round washers for friction grip bolts179楔型方垫圈DIN6917Spuare taper washers for friction grip bolts on T-180六角法兰面螺母DIN6923GB6187-86ISO4161Hexagon flange nuts181全金属六角锁紧螺母2型DIN6925GB6185.1-2000ISO7042Prevailing torque type hexagonnuts,all metallic nuts182轻型弹性圆柱销DIN7346ISO13337Spring pins,light type183重型弹性圆柱销用垫圈DIN7349Washers for bolts with heavy type spring pinss184ISO公制螺纹螺钉多种头型DIN7500Thread forming screws for ISO-metric thread185开槽切削螺纹螺钉（多种头型）DIN7513Thread cutting screws186十字槽切削螺纹螺钉（多种头型）DIN7516Thread cutting screws crossrecess187T型四爪螺母DIN7965Tee nuts with pronge188钢结构用六角头螺栓连接副DIN7968GB1228/1229/1230Hexagon head fitted bolts forsteel structures189圆柱头螺钉用弹簧垫圈DIN7980ISO8738Spring lock washers for screws with cylindrical heads190薄型内六角圆柱头螺钉DIN7984Hexagon socket head cap screws with,reduced head191钢结构用垫圈DIN7989GB1230-84Washers for steel structures192钢结构用六角头螺栓DIN7990GB1229-84Hexagon head bolts for steel structures193轴用钢丝挡圈DIN7993GB895.2-86Roundwire snap rings for shafts194十字槽半沉头木螺钉DIN7995GB952-86Cross recessed raisedｃｏｕｎｔersunk head wood screws195十字槽圆头木螺钉DIN7996GB950-86Cross recessed round head wood screws196十字槽沉头木螺钉DIN7997GB951-86Cross recessedｃｏｕｎｔersunk head wood screws197螺纹护套(普通、自锁等)DIN8140Ciolｉｎｓｅｒｔs,coarse,fine thread,silf locking198大外径垫圈DIN9021GB96-85ISO7093Washers,outside diameter appro.3d 199弹簧卡子DIN11024sping cotter for a bolt200平板螺栓DIN13257Belting bolts(elevator bolts)201干壁钉（墙板钉）DIN18182Dry wall screws202环型螺母DIN28129GB63-88Lifting nuts(eye nuts)203圆螺母用止退DIN70952Tab washer for slotted round nuts 204圆锥销DIN1GB117ISO2339Taper pins205圆柱销DIN7GB119-86ISO2339Parallel pins206开槽圆柱头螺钉DIN84GB65-85ISO1207Slotted cheese head screws207开槽盘头螺钉DIN85GB67-85ISO1580Slotted pan head screws208单耳止动垫圈DIN93GB854Tab washers209开口销DIN94GB91ISO1234ｓｐｌｉｔcooter pins。
(标准对照)德国标准和国际标准、中国标准对照表
序号德国标准中文品名国际标准中国标准1DIN1圆锥销ISO2339GB1172DIN7圆柱销ISO2338GB119-863DIN84开槽圆柱头螺钉ISO1207GB65-854DIN85开槽盘头螺钉ISO1580GB67-855DIN93单耳止动垫圈GB8546DIN94开口销ISO1234GB917DIN95开槽半沉头木螺钉GB1018DIN96开槽半圆头木螺钉GB999DIN97开槽沉头木螺钉GB10010DIN125-A平垫ISO7089GB97.1-8511DIN125-B平垫(带倒角)ISO7090GB97.2-8512DIN126平垫ISO709113DIN127-A重型弹垫GB724414DIN127-B标准弹垫GB93-8715DIN128-A鞍形弹垫GB7245-8716DIN137-A弹簧止动垫圈17DIN137-B波形弹垫GB95518DIN186T型方颈螺栓GB37-8819DIN188T型双接头螺栓20DIN258螺纹圆锥销ISO873721DIN261T型头螺栓22DIN315AF蝶形螺母(美制)23DIN315DF蝶形螺母(德制)GB62-8824DIN316AF蝶形螺钉(美制)25DIN317DF蝶形螺钉(德制)26DIN319圆球型盖型螺母27DIN404开槽带孔球面圆柱头螺钉GB832-8828DIN417开槽长圆柱端紧定螺钉ISO7435GB75-8529DIN427开槽平端紧定螺钉(半牙)ISO2342GB73-8530DIN431小六角特薄细牙螺母GB808-8831DIN432外舌止动垫圈GB856-88序号德国标准中文品名国际标准中国标准32DIN433小垫圈(用于圆柱头螺钉)ISO7092GB848-9533DIN434方斜垫圈(U型)GB852-8834DIN435方斜垫圈(I型)GB852-8835DIN436方垫圈36DIN438开槽凹端紧定螺钉ISO7436GB74-8537DIN439六角薄螺母ISO4035GB6172-8638DIN439细牙六角薄螺母ISO8675GB6173-8639DIN440木螺钉专用垫圈ISO709440DIN443密封帽41DIN444活节螺栓B型GB798-8842DIN462内舌止动垫圈43DIN463双耳止动垫圈GB855-8844DIN464滚花高头螺钉GB834-8845DIN465开槽滚花高头螺钉46DIN466滚花高螺母GB806-8847DIN467滚花薄螺母GB807-8848DIN470锁紧垫圈49DIN471轴用弹性挡圈GB894.1-8650DIN472孔用弹性档圈GB893.1-8651DIN478方头带垫螺栓52DIN479方头圆柱底端螺栓53DIN480方头带垫半圆底端螺栓54DIN508T型槽螺母ISO29955DIN525单头螺柱56DIN529地脚螺栓GB799-8857DIN546带槽圆螺母GB817-7658DIN547端面带孔圆螺母GB815-8859DIN551开槽平端紧定螺钉ISO4776GB73-8560DIN553开槽锥端紧定螺钉ISO7434GB71-8561DIN555六角螺母ISO403462DIN557方螺母－C GB39-88序号德国标准中文品名国际标准中国标准63DIN558六角头螺钉ISO401864DIN561六角头圆柱端紧定螺钉65DIN562薄型方螺母-B66DIN571六角头木螺钉GB102-8667DIN580吊环螺钉ISO3266GB825-7668DIN582吊环螺母69DIN601六角头螺栓ISO401670DIN603大半圆头方颈螺栓ISO8677GB14-8871DIN604沉头带插销马车螺栓72DIN605沉头长方颈马车螺栓73DIN607半圆头带插销马车螺栓74DIN608沉头短方颈马车螺栓75DIN609六角头精配螺栓(长螺纹)76DIN610六角头精配螺栓(短螺纹)77DIN653滚花平头螺钉GB835-8878DIN660半圆头铆钉ISO1051GB867-8679DIN661沉头铆钉ISO1051GB869-8680DIN662半沉头铆钉ISO105181DIN674大扁头铆钉ISO105182DIN703重型侧面带孔圆螺母83DIN705侧面带孔圆螺母GB816-8884DIN741卡头85DIN787T型槽螺钉ISO29986DIN835双头螺柱(牙长＝2D)GB900-8887DIN906内六角锥型闭锁螺钉88DIN908内六角直型闭锁螺钉89DIN909外六角锥型闭锁螺钉90DIN910外六角直型闭锁螺钉91DIN911内六角扳手ISO293692DIN912内六角圆柱头螺钉ISO4762GB70-8593DIN913内六角平端紧定螺钉ISO4026GB77-85序号德国标准中文品名国际标准中国标准94DIN914内六角尖端紧定螺钉ISO4027GB78-8595DIN915内六角圆柱端紧定螺钉ISO4028GB79-8596DIN916内六角凹端紧定螺钉ISO4029GB80-8597DIN917薄型盲螺母98DIN920开槽小圆柱头螺钉99DIN921开槽大圆柱头螺钉GB838-88100DIN923开槽圆柱头轴肩螺钉GB830-88101DIN927开槽无头轴肩螺钉102DIN928焊接方螺母GB/T13680-92 103DIN929焊接六角螺母GB/T13681-92 104DIN931六角头螺栓(半牙)ISO4014GB5782-86105DIN933六角头螺栓(全牙)ISO4017GB5783-86106DIN934六角头螺母(1型)ISO4032GB6170-86107DIN934细牙六角头螺母(1型)ISO8673GB6171-86108DIN935开槽六角螺母ISO7035GB6178-86109DIN936六角头薄螺母ISO4035GB6172.1-86 110DIN937六角头开槽薄螺母ISO7038GB6181-86111DIN938双头螺距(牙长＝1D)GB897-88112DIN939双头螺距(牙长＝1.25D)GB898-88113DIN940双头螺距(牙长＝1.5D)114DIN960六角头细牙螺栓(半牙)ISO8765GB5785-86115DIN961六角头细牙螺栓(全牙)ISO8676GB5786-86116DIN962头部穿孔六角头螺栓117DIN963开槽沉头螺钉ISO 2009GB68-85118DIN964开槽半沉头螺钉ISO 2010GB69-85119DIN965十字槽沉头螺钉ISO7046GB819-85120DIN966十字槽半沉头螺钉ISO7047GB820-85121DIN970六角头螺母122DIN971六角头螺母123DIN972细牙六角头螺母(2型)ISO8674GB6176-86124DIN975牙条(全螺纹)GB15389-94序号德国标准中文品名国际标准中国标准125DIN976螺纹销126DIN979六角头开槽薄螺母(2型)127DIN980全金属六角锁紧螺母 (1型)ISO7199GB6184-86128DIN981圆螺母ISO2982GB812-88129DIN982六角头尼龙锁紧螺母ISO7040GB889.1-86130DIN985六角头薄型尼龙锁紧螺母ISO10511GB6172.2-86 131DIN986六角盖型尼龙锁紧螺母132DIN988配合垫片133DIN1052木材连接用垫片134DIN1151沉头钢钉135DIN1440销钉专用垫片A型ISO8738136DIN1441销钉专用垫片137DIN1444带头销钉ISO2341138DIN1471圆锥型槽销ISO8744GB/T13829.2 139DIN1472圆锥型槽销(半槽)ISO8745GB/T13829.2 140DIN1473平行槽销(带倒角)ISO8740141DIN1474前端凹槽槽销ISO8741142DIN1475中部凹槽槽销ISO8742143DIN1476圆头槽销ISO8746GB/T13829.2 144DIN1477沉头槽销ISO8747145DIN1479六角螺母棒146DIN1480花篮螺栓147DIN1481弹性圆柱销ISO8752GB879-86148DIN1587组合式盖型螺母GB802-88149DIN1804开槽圆螺母(配合沟头扳手)150DIN1816圆螺母(带插销孔)151DIN2093盘型弹簧垫圈152DIN3017喉箍153DIN3404润滑油嘴(旋扭头)154DIN3567管夹155DIN3570U型螺栓序号德国标准中文品名国际标准中国标准156DIN6319球面垫圈GB849-88157DIN6325圆柱销ISO8734158DIN6330厚六角螺母GB56-88159DIN6331厚六角法兰面螺母GB6177-86160DIN6334长六角螺母161DIN6797-A外齿锁紧垫圈GB862.1-87162DIN6797-1内齿锁紧垫圈GB861.1-87163DIN6798-A外锯齿锁紧垫圈GB862.2-87164DIN6798-1内锯齿锁紧垫圈GB861.2-87165DIN6799开口挡圈GB896-76166DIN6885平键(A型)ISO773/2491167DIN6888半圆键ISO3912168DIN6899嵌环(支撑环)169DIN6900机器螺钉和垫圈组合件GB9074.1-17 170DIN6901自攻螺钉和垫圈组合件GB9074.18-23 171DIN6912薄型带孔内六角圆柱头螺钉172DIN6914大六角头螺栓173DIN6915大六角螺母174DIN6916大垫圈175DIN6917楔型方垫圈176DIN6923六角法兰面螺母ISO4161GB6177-86177DIN6925全金属六角锁紧螺母(2型)ISO7042GB6185.1-2000 178DIN7337开口型抽芯铆钉(沉头、扁圆头)GB12617/12618 179DIN7338扁平头半空心/全空心铆钉GB875/975-86 180DIN7343螺旋夹紧销ISO8750181DIN7346轻型弹性圆柱销ISO13337182DIN7349重型弹性圆柱销用垫圈183DIN7500ISO公制螺纹螺钉 (多种头型)184DIN7504自攻自钻螺钉(多种头型)185DIN7513开槽切削螺纹螺钉(多种头型)186DIN7516十字槽切削螺纹螺钉 (多种头型)序号德国标准中文品名国际标准中国标准187DIN7965T型四爪螺母188DIN7968钢结构用六角头螺栓连接副GB1228/1229/1230 189DIN7971开槽盘头自攻螺钉ISO1481GB5282-85190DIN7972开槽沉头自攻螺钉ISO1482GB5283-85191DIN7973开槽半沉头自攻螺钉ISO1483GB5284-85192DIN7976六角头自攻螺钉ISO1479GB5285-85193DIN7980圆柱头螺钉用弹簧垫圈ISO8738194DIN7981十字槽盘头自攻螺钉ISO 7049GB845-85195DIN7982十字槽沉头自攻螺钉ISO7050GB846-85196DIN7983十字槽半沉头自攻螺钉ISO7051GB847-86197DIN7984薄型内六角圆柱头螺钉198DIN7985十字槽盘头螺钉ISO7045GB818-85199DIN7989钢结构用垫圈GB1230-84200DIN7990钢结构用六角头螺栓GB1229-84201DIN7991内六角沉头螺钉ISO10642202DIN7993轴用钢丝挡圈GB895.2-86203DIN7995十字槽半沉头木螺钉GB952-86204DIN7996十字槽圆头木螺钉GB950-86205DIN7997十字槽沉头木螺钉GB951-86206DIN8140螺纹护套(普通\自锁等)207DIN9021大外径垫圈ISO7093GB96-85208DIN11024弹簧卡子209DIN13257平板螺栓210DIN18182干壁钉(墙板钉)211DIN28129环型螺母GB63-88212DIN70952圆螺母用止退垫圈GB858-88。
德国螺丝扭力标准
德国螺丝扭力标准
德国螺丝扭力标准通常是指按照德国DIN（Deutsches Institut für Normung，德国标准化学会）制定的一系列关于紧固件拧紧力矩的标准。
这些标准会根据不同的螺栓规格、材料等级、表面处理状况以及连接件的类型等因素来确定相应的拧紧扭矩值，确保螺栓连接在安全、可靠的同时，避免因过载或欠载导致的连接失效。
例如，DIN 65151 和 DIN EN ISO 898-1/-2 是规定钢结构高强度螺栓连接扭矩控制的标准；而DIN 267是关于普通紧固件尺寸和公差的标准系列，它不直接规定扭矩，但在实际应用中，配合相关的拧紧工艺指导，会参考此类标准确定合适的拧紧扭矩。
对于特定类型的螺栓，例如汽车工业中使用的螺栓，像之前提到的EA888发动机的螺丝扭力数据就是一个实例，拧紧扭矩会根据制造商的具体工程要求来设定，并不一定完全符合某一通用的德国标准，而是基于实际工况和测试验证的结果。
如果您需要查询具体的德国螺丝扭力标准数值，建议查阅最新的德国DIN标准文档或者联系相关行业的技术专家获取准确的拧紧扭
矩数据。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Electrical apparatus for potentially explosive atmospheres for mining; triangle head bolts Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; single anchor plates; dimensions, designations, mounting depth Equipment for steelworks and rolling mills; anchor plates for tee head bolts according to DIN 261; double anchor plates; dimensions, designations, mounting depth Bolted connections with reduced shank, survey and installation; studies relating to the calculation of bolted connections Bolted Connections with Reduced Shank; Survey, Range of Application and Examples of Installation Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits Bolted Connections with Reduced Shank; Stud-bolts Bolted Connections with Reduced Shank; Studs Bolted Connections with Reduced Shank; Hexagon Nuts
DIN 2510-1 Bb.-1974
带减缩刀柄的螺栓连接件的测量和安 装.第 7 部分:螺栓连接件计算的相关 研究
DIN 2510-1-1974
带减缩刀柄的螺栓连接件.第 1 部分: 综述.应用范围和安装示例
DIN 2510-2-1971
带缩径杆的螺栓连接件.带大间隙的米 制螺纹.标称尺寸和极限尺寸
德国螺栓标准(DIN bolt standards)
编号
中文名称
英文名称 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter Agricultural equipment; countersunk double-nip bolts, sinkings, metric thread, finish Agricultural machinery - Flat countersunk square neck bolts with short square Agricultural tractors and machinery - Trailer coupling - Bolt coupling for coupling-ring 40 Step irons for staggered manhole steps - Part 3: Bolted-on step irons Step irons with upstand for staggered manhole steps - Part 3: Bolted-on step irons Washers; Type Coarse for Bolts Knobs and knobbed screws for rail vehicles Stairs with load-bearing bolts for residential buildings; design and execution T-head bolts with square neck T-head bolts with double nib Capture-track rail installations in mining; bolted couplings for rope-hauled and self-propelled rail installations; bolted coupling 30 Round pit timber; bolts Square head bolts for shaft guides Slit-bolts Electrical apparatus for potentially explosive atmospheres in mining; triangular head bolts; safety requirements and testing
DIN 103-7-1972
ISO 米制梯形螺纹.标称直径 8～100mm 螺栓螺纹的极限尺寸
DIN 103-8-1972
ISO 米制梯形螺纹.标称直径 105 至 300mm 螺栓螺纹的极限尺寸
DIN 11014-1968
农业机械.米制螺纹、精制沉头双接口 螺栓 农业机械.带短四角方凸台的扁平埋头 螺栓 农业用拖拉机和机械..拖车联轴节.40 联接环用螺栓联轴节 错列人孔阶梯脚扣.第 3 部分:螺栓连 接的阶梯脚扣 错列人孔直立式阶梯脚扣.第 3 部分: 螺栓连接的阶梯脚扣 螺栓用粗制垫圈 有轨车辆的按钮和按钮螺栓 住宅的装有承载螺栓的楼梯.设计和建 造 带方颈部的 T 形头螺栓 带双凸边的 T 形头螺栓
DIN 2510-3-1971
带缩径杆的螺栓连接件.双头螺柱
DIN 2510-4-1971
带缩径杆的螺栓连接件.螺柱
DIN 2510-5-1971
带缩径杆的螺栓连接件.六角螺母
DIN 2510-6-1974
带减缩刀柄的螺栓连接件.第 8 部分: 螺母 带减缩刀柄的螺栓连接件.第 7 部分: 延伸式套管 带缩径杆的螺栓连接件.螺杆用的螺纹 孔
Screws, bolts and nuts for rail vehicles Summary Design guide for railway vehicles and their components - Bolted joints - Part 1: Classification of bolted joints Design guide for railway vehicles and their components - Bolted joints - Part 2: Design Mechanical application, Corrigenda to DIN 25201-2:2006-04 Design guide for railway vehicles and their components - Bolted joints - Part 2: Design Mechanical application Design guide for railway vehicles and their components - Bolted joints - Part 3: Design Electrical application Design guide for railway vehicles and their components - Bolted joints - Part 4: Securing of bolted joints Design guide for railway vehicles and their components - Bolted joints - Part 5: Protection against corrosion Design guide for railway vehicles and their components - Bolted joints - Part 6: Connecting dimensions Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation, Corrigenda to DIN 25201-7:2004-06 Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation Tank wagons; vent holes and drain plugs on pressurized gas tank wagons with bottom discharge Tank wagons; vent holes and drain plugs on tank wagons with indined tanks T-head bolts Fasteners - Technical specifications - Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures
DIN 24536-1985
带锚盒的地脚螺栓和 T 型头螺栓的图 形符号