三星I5508说明书
逐步了解待机屏幕 ........................ 20 访问应用程序 ............................. 21 启动和管理应用程序 ..................... 22 自定义手机 ................................ 23 输入文本 ................................... 25 Java 世界 ................................ 28
目录 5
娱乐 ................................... 36
相机 ........................................ 36 图库 ........................................ 42 音乐 ........................................ 44 调频收音机 ................................ 46
• 如果手机无法正常充电，请将手机和充电器拿 到三星客服中心。
4 当电池充满电（电池图标不再移动）时，从手机拔 下旅行充电器，然后将其从电源插座中拔下。
安装 11
• 请勿在取下旅行充电器前取出电池。否则会 损坏手机。
• 如欲确保达到最佳电池性能，请先将电池完全 充电和放电（将电池用完）两三次。
6 目录
连接功能 .............................. 61
蓝牙 ........................................ 61 WLAN .................................... 63
工具 ................................... 64
时钟 ........................................ 64 计算器 ..................................... 65 词酷 ........................................ 65 三星客户服务 ............................. 66 我的文件 ................................... 66 USIM 卡应用 ............................ 66 ThinkFree Office .................... 67 速写 ........................................ 68
安装 SIM 或 USIM 卡和电池
当您订购移动电话服务时，将获得一张用户识别模块 (SIM) 卡，其中载有您的订购详细信息，例如个人识别 号码 (PIN) 和可选服务。如欲使用 UMTS 或 HSDPA 服务，可购买通用用户识别模块 (USIM) 卡。
如欲安装 SIM 或 USIM 卡和电池：
1 如果手机处于开机状态，请按住 [ 关机将其关闭。
设置 ................................... 69
访问设置 ................................... 69 无线和网络设置 .......................... 69 通话设置 ................................... 70 声音和显示 ................................ 71 位置和安全 ................................ 72 应用程序 ................................... 72 帐户与同步 ................................ 73 隐私权 ..................................... 73 SD 卡和手机内存 ........................ 73 搜索 ........................................ 74 语言和键盘 ................................ 74
WAP ................................. 55
手机上网 ................................... 55 迷你地图 ................................... 56 手机 QQ ................................... 57 Samsung Apps ....................... 57 社交 WAP 网页 ......................... 58 客服热线 ................................... 58 同花顺 ..................................... 58 手机营业厅 ................................ 59 手机杂志 ................................... 59 乐媒 ........................................ 60 沃·3G ...................................... 60
• 本产品基于 Linux 的 AndroidTM 平台，该平台可通 过各种基于 JavaScript 的软件扩展。
• Bluetooth® 是世界各地 Bluetooth SIG 公司的 注册商标。
使用本说明书 3
• Java™ 是 Sun Microsystems 公司的商标。
•
和
是 SRS Labs 公司的商标。 CS 耳
机和 WOW HD 技术由 SRS Labs 公司开发并授
权使用。
• 其它全部商标和版权归各自的所有人所有。
4 使用本说明书
目录
安装 .................................... 9
配件介绍 ..................................... 9 安装 SIM 或 USIM 卡和电池 .......... 9 为电池充电 ................................ 10 插入存储卡（选配） ..................... 12 系上手带（选配） ........................ 14
通讯 ................................... 29
呼叫 ........................................ 29 发送信息 ................................... 32 电子邮件 ................................... 34
›› 用旅行充电器充电
1 打开手机侧面多功能插口的外盖。 2 将旅行充电器的小端插头插入多功能插口中。
旅行充电器连接不当可能会导致手机严重损坏。 对于因误操作造成的任何损坏，将不予保修。
3 将旅行充电器的大端插头插入电源插座中。
• 可在充电时使用手机，但这会延长电池完全充 电的时间。
• 手机在充电时会变热，这属于正常情况，不会 影响手机的使用寿命或性能。
目录 7
辅助功能 ................................... 74 日期和时间 ................................ 75 关于手机 ................................... 75
应用程序概述 ........................ 76 故障排除 .............................. 78 安全和使用信息 ..................... 82
注意—注释、使用提示或附加信息。
2 使用本说明书
► 参照— 具有相关信息的页面。例如： ►12 页（表示“参照 12 页”）。
→ 下一步— 为执行步骤必须选择的选项或功能 表的次序。例如：在应用程序列表中，选择 设置 → 无线和网络设置（表示设置，下一步 无线和网络设置）。
[ ] 方括号— 手机按键。例如：[ ]（表示电 源/锁定键）。
中国印刷 编码：GH68-29639A 中文 08/2010 版本 1.1
中国联通定制手机使用说明书
GT-I5508
中国联通定制手机使用说明书 GT-I5508
使用本说明书
感谢您购买三星手机。本手机基于三星的高科技和高 标准，为您提供高品质的移动通信和娱乐享受。
版权
版权 © 2010 三星电子。 本使用说明书受国际版权法保护。 如果未事先书获得三星电子的书面许可，本使用说明 书的任何部分都可能无法以任何形式或任何方式（电 子版本或机械版本）复制、分发、翻译或传输，包括 复印件、记录或存储于任何信息存储器或检索系统中 的数据。
商标
• SAMSUNG 和 SAMSUNG 标识是 SAMSUNG Electronics 的注册商标。
入门指南 .............................. 15
开机和关机 ................................ 15 了解手机 ................................... 15 使用触摸屏 ................................ 19 锁定或解锁触摸屏和按键 ............... 19
个人信息 .............................. 49
Samsung 电子洗衣机说明书
4. Place the lid back on the dispenser and turn to close.
2. Add rinse aid up to the max mark.
max
Programmes
The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. The runtime will change if the rinse aid system is switched off or rinse aid needs to be added.
and remove. 2. On initial start-up: Fill the dispenser right up with
water.
Adding rinse aid
1. Press the catch on the lid
of the dispenser for t .
Eco 50°
1) 3:55 2) 0,736 3) 9,5
Silence 50 1
1) 4:00 2) 0,800 3) 10,5
三星电子产品说明书
396438 Spring (72 req’d) 382716 Guide (72 req’d)
Snap Ring (2 req’d) (See table)
423410 Pin
Y 154108 O-Ring (4 req’d)
Pack with grease at assembly
Y 271822 Back-up Ring (4 req’d)
382709 Rotor
Y 1623 Seal (2 req’d) Y 154011 O-Ring (2 req’d)
Y 154130 O-Ring
181792 Plug
Ring (See Table)
CAUTION Assemble Ring with Case Drain Hole as shown (not rotated with hole at top)
Service Data
Vickers®
Vane Motors
Multi-Torque Vane Motors
MHT-190 and 220 Series
Model MHT-190/N1-30-S20 MHT-190/R1-30-S20 MHT-220/N1-30-S20 MHT-220/R1-30-S20
resistant fluids
2 Model Series MHT - Vane motor, high torque,
low speed
4 Shaft
N1 - No shaft R1 - Standard solid shaft
3 Theoretical Torque
Combinations of theoretical output torque in lbs. ft. per 100 p.s.i. differential pressure
三星(Samsung)音响设备说明书
V P M -254M 1 M O N I T O RSBack ViewAC PowerPortAUX-In Port RCA Ports Power Switch SUB-OUT Port SP-L Port SP-L PortFunction Knob CONNECT THE TWO MONITORS WITH THE BLACK SPEAKER CABLEGETTING STARTEDBASIC OPERATIONWith the master power switch in the ON position press and hold the Function Button for 1-2 seconds to power on the monitors.Press the Function Knob to cycle through the following playing modes:BLUETOOTH: Connecting and playing music from a Bluetooth device (Smartphone). Turn the unit ON.Simply press the Function Knob to make sure it is in Bluetooth mode(the LED will ash blue).On your device, turn Bluetooth ON. Then search for / select “M1 Monitors”in the settings menu.(Once connected to the M1 Monitors, The Dial will Turn a Steady Blue)Once a device is paired, it will automatically connect each time you enter Bluetooth mode if it is nearby.Note: -Make sure the unit is within 10m (33ft) from your external device for the strongest connection.SPEAKER GRILL: To detach the magnetic speaker grill from the Monitors,simply hold the corners of the grills and slide it off from the Monitor. The grillcan easily be put back on by matching the corners of the grill to the Monitorsand letting the magnets snap into place.GENERALPower Requirements.................................................................................AC 100-240V~50/60HZPower Consumption..................................................................................60 WSpeaker .....................................................................................................2” Tweeter x2 +4” Woofer x2 Dimensions (W x D x H).............................................................................156mm x 191mm x 228mm (approx) Weight........................................................................................................4.75 kgsBLUETOOTHBluetooth Version......................................................................................Bluetooth V5.0Bluetooth Pro les......................................................................................A2DP, AVRCPBluetooth Frequency range.......................................................................2.402GHz-2.480GHzOperating Distance...................................................................................10 meters (33 ft.)INCLUDED:M1 Monitors, AUX Cable, RCA Cable, Power Cable, Instruction Manual, Quick Setup GuideImportant Safety Instruction1. Read these instructions – All the safety and operating instructions should be read before this product is operated.2. Keep these instructions – The safety and operating instructions should be retained for future reference.3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.4. Follow all instructions – All operating and use instructions should be followed.5. Do not use this apparatus near water – The appliance should not be used near water or moisture – forexample, in a wet basement or near a swimming pool, and the like.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includingamplifiers) that produce heat.9. Protect the power cord from being walked on or pinched particularly at the plugs, conveniencereceptacles, and at the point where they exit from the apparatus.10. Only use attachments/accessories specified by the manufacturer.11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatuscombination to avoid injury from tip-over.12. Unplug the apparatus during lightning storms or when unused for long periods of time.13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged inany way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the userto the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be ofsufficient magnitude to constitute a risk of electric shock.a. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are nouser-serviceable parts inside. Refer servicing to qualified personnel.b. The exclamation point within an equilateral triangle is intended to alert the user to the presence ofimportant operating and maintenance instructions in the literature accompanying the appliance.15. This equipment is a Class II or double insulated electrical appliance. It has been designed in such away that it does not require a safety connection to electrical earth.16. The mains plug is used as disconnect device, the disconnect device shall remain readily operable.17. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.18. The use of the equipment in moderate climate.19. WARNING: Please refer the information on exterior bottom/back enclosure for electrical and safetyinformation before installing or operating the apparatus.20. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper,table-cloths, curtains etc.21. No naked flame sources, such as lighted candles, should be placed on the apparatus.22. Do not install this equipment in a confined space such as a book case or similar unit.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.The device must not be co-located or operating in conjunction with any other antenna or transmitter. To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm fromnearby persons.impossible, you may contact our customer service for warranty assistance at /contact.Except as limited below, if the product proves defective in either material or workmanship within one (1) year from the date of purchase, Victrola will replace the product at no charge. If the product model is no longer available and cannot be replaced with an identical model, Victrola will issue a merchandise credit for the purchase price to be redeemed at .Limitations:• This limited warranty does not cover failure of the product arising, in whole or in part, from improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling,unauthorized repair, modi cation, or wear from ordinary use or environmental deterioration.• This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.• This limited warranty is null and void for products not used in accordance with Victrola’s instructions. • This limited warranty terminates if the original retail purchaser sells o otherwise transfers this product.• This limited warranty is null and void for defects or damage caused by installation or repairperformed by any person or entity other than a Victrola authorized installer or dealer.This warranty gives you speci c legal rights, and you may also have other rights which vary from state to state, jurisdiction to jurisdiction or country to country. All express and implied warranties for the product, including but not limited to any implied warranties of merchantability and tness for a particular purpose, are limited in time to the term of this warranty. Some states, jurisdictions or countries do not allow the exclusion of certain implied warranties or conditions, or limitations on how long an implied warranty or condition lasts, so this limitation may not apply to you. Victrola’s responsibility for malfunctions and defects in hardware is limited to replacement or repair as set forth in this warranty statement. Victrola does not accept liability for special, punitive, consequential or incidental damages or losses, whether direct or indirect, including without limitation, any liability for third party claims against you for damages orlosses or for products not being available for use. The maximum liability for which Victrola may beresponsible will be no more than the amount you paid for the product that is the subject of the claim. Some states, jurisdictions or countries do not allow the exclusion or limitation of special, indirect, incidental or consequential damages, so the above limitation or exclusion may not apply to you. Canada and US TerritoriesThe Warranty on this product shall comply with applicable law when sold to a consumer in Canada or a US Territory. To obtain any applicable warranty service, please contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt.If assistance from the dealer from which it was purchased is impossible, you may contactour customer service for warranty assistance at /contact.If this product proves defective in either material or workmanship, Victrola will replace the product at no charge. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, Victrola at its sole option may replace the unit with a current model of equal or greater value. Outside the U.S, Canada, and US TerritoriesThe Warranty on this product shall comply with applicable law when sold to a consumer outside of the United States, Canada, and US Territories. To obtain any applicable warranty service, please contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt.VPM254-082621。
三星电子（Samsung Electronics）智能手机用户指南说明书
MT3870 & MT3855G SERIESCONVEYOR OVENREPLACEMENT PARTS LISTSuperseding All Previous Parts Lists.The Company reserves the right to make substitution in the event that items specified are not available.ERRORS: Descriptive and/or typographic errors are subject to correction.EFFECTIVE SEPTEMBER 6, 2001BLODGETT OVEN COMPANY , 50 Lakeside Avenue, Burlington, Vermont 05401 USAT elephone: (802) 860-3700 (800) 331-5842 Fax: (802) 860-3732MT3870 & MT3855GSeptember 6, 2001þASAP Distributor Required Stocking Parts t Doors Are Not Returnable *Item Is Too Large For UPS2ELECTRICAL COMPONENTS - Cont'dRef.Part No.No.Description13M0593Terminal Block, 2 Pole (Qty 1 or CE Qty 2)M2469Fan, Axial 110 CFM 4 1/2" (Qty 4)(Before 11/14/95)22718Fan Guard & Hardware (Qty 3)(Before 11/14/95)M0572Cord, Axial Fan 30" Power (Qty 4)(Before 11/14/95)15M3136Breaker, 7 AMP Circuit (Qty 4)16M2772Breaker, 4 AMP Circuit (Qty 2)M6590Plate Assy., Control SB (Qty 1)M7482Plate Assy., Control TB (Qty 1)M1694Cord Set & Plug Assy., 10 Foot (Qty 1)M0772Receptacle, Twist Lock (Qty 1)1717M0708Contactor, 3 Pole, 120V Coil (Qty 1)18M3322Hood Interlock, Contact Block (Qty 1)ELECTRICAL COMPONENTSRef.Part No.No.Description1M6474Computer Control Kit, Closed Loop SB (Qty 1)1FW525Computer Control Kit, Closed Loop SB (Qty 1), Recon.M8777Chip, Closed Loop 3.30M9692DAC Board, Closed Loop SB (for M6474)2M10197Remote Mounting Support Kit, for Computer (sgl, dbl, & tpl ovens) Replaces M3314M10049Decal & Control Membrane (for M6474/FW525) SB M3175Lexan Decal only, SBM5635Computer Control Kit, Open Loop TB (Qty 1)M6107Chip, Open Loop TBM10034Decal & Control Membrane (for M5635) TB M4400Lexan Decal only, TBM7427Probe, Temperature RTD, 500 OHMS (Qty 1)M7202Conversion Kit, Open Loop to Closed Loop (Qty 1)M10035Silicone Compound (for cables)M3347Cable, Computer Control, 25 Pin, 10' (Qty 1)M3348Cable, Computer Control, 9 Pin, 10' (Qty 1)M9262Jack Screw (for Cables)M3490Cable, Computer Control, 25 Pin, 50' (Qty 1)M3491Cable, Computer Control, 9 Pin, 50' (Qty 1)M3349Harness, w/socket, Inter-Connecting DC Drive, 3-Wire, 9 Pin (Qty 1)M7237Harness, w/socket, Relay Board, 25 Pin (Qty 1)M9985Relay Harness & Jack Screw Kit, 25 pin M3624Harness, Control Plate (connect from 25 pin relay board harness)M3120Harness, wiring (Control Plate to blower compartment harness)M7331Harness, blower compartmentM5661Bracket Assy., Cable Clamp (Qty 1)3M0984Pick Up, PV-2 (Qty 1) (After 9/15/95)4M7236Board, Relay/Transformer (Qty 1)522672Relay, Control (Qty 4, "Ice cube")6M3352Transformer, 120V to 24V (Qty 1)720349Buzzer, 120V (Qty 1)836066Thermostat, High Limit Kit (Qty 1)9M1362Snap Disc, L140/20F, 2 Pole SPST (Qty 1)(Control Compartment)M2453Snap Disc, L140/20F, 3 Pole SPDT (Qty 1)(Blower Compartment)10M0595Switch, Air Pressure SPDT (Qty 1)M0959Fitting, Compression 1/4" (Qty 2)M2799Union, Compression (Qty 1)11/12M10543Emergency Stop Switch Kit (Qty 1)Replaces M3296, M0152, M3297MT3870 & MT3855G DOMESTIC & GENERAL EXPORT SB CONTROL PLATEASSY (M6590)M13629M10081or FW50221M978723M059313M225422M277216M313615226725M72364M105468M332218M330124M32958203497M3352617CONVEYOR COMPONENTSRef.PartNo.No.Description19M6338Belt, Wire S/S 38" wide SB (Per Foot)(Total Length MT3870 18 FT, MT3855 16 FT) M7889Belt, Wire S/S 18-1/2" wide TB (Per Foot)(T otal Length MT3870 18 FT, MT3855 16FT) M10337Belt, Wire 8" wide Split Belt (Per Foot)(Total Length MT3870 18 FT)20M7272Tensioner Assy., Belt MT3870 (Qty 2)(After 9/15/95)FW502Speed Control Board, Bodine Recond.(After 9/90)NOTE:M2379 is no longer availableM10099Conveyor Motor & Control Kit, Brushless(for Computerized Ovens) *See Note21M10081Conveyor Control Board, Brushless *See Note 25M10082Conveyor Motor, Brushless *See Note*NOTE:You must install the Brushless Kit BEFOREyou purchase the new brushless motor orcontrol separately.NOTE:All MT3855 ovens built after 05/11/01 or serialnumber 051101BH094S are built with brushlessstyle components. You may replacecomponents separately.M6192Bracket (For M10082)22M2254Fuse, Line, Bodine Board, 5 AMP, 125V(Qty 1)23M9787Fuse, Armature, 250MA, 250V (Qty 1)(Replaces part M2316, DOMESTIC ONLY)24M3301Capacitor, Speed Control Board(SB Qty 1 or TB Qty 2)M2500Brush Set, Bodine (Qty 1)M0391Chain, Drive (SB Specify 2 FT or TB Specify4 FT & Order M0112)M0112Masterlink, Drive Chain (Qty 1)26M6791Guard, Drive Chain SB (Qty 1)M6482Guard, Drive Chain TB (Qty 1)27*M6154Conveyor Assy., Drive SB MT3870 (Qty 1) NOTE:If your oven was made before 09/15/95 youmust order a new crumb pan (Part # M6167) w/conveyor assy. If your oven was made after09/15/95, do not order a new crumb pan.28*M6155Conveyor Assy., Idle SB MT3870 (Qty 1) NOTE:If your oven was made before 09/15/95 youmust order a new crumb pan (Part # M6168)w/conveyor assy. If your oven was made after09/15/95, do not order a new crumb pan.*M7592Conveyor Assy., Drive TB MT3870 (Qty 1)*M7593Conveyor Assy., Idle TB MT3870 (Qty 1)*M4432Conveyor Assy., Drive SB MT3855G(Qty 1) (Before 11/14/95)*M4433Conveyor Assy., Idle SB MT3855G(Qty 1) (Before 11/14/95)*M6777Conveyor Assy., Folding (Drive & Idle) SB(Qty 1) MT3855G (After 11/14/95)*M9950Conveyor Assy., TB MT3855G (Drive & Idle) NOTE:TB is two belts, 18 1/2" wide per belt.*M9956Conveyor Assy., Split MT3855G (Drive & Idle) NOTE:Split Belt is two belts, one is 8" wide,one is 30" wide.CONVEYOR COMPONENTS - CONT'DRef.PartNo.No.Description*M8617Conveyor Assy., Drive (3 Belt MT3870 only) *M8618Conveyor Assy., Idle (3 Belt MT3870 only) 29*M2672Shaft, Conveyor Drive SB (Qty 1)30*M2673Shaft, Conveyor Idle SB (Qty 1)*M9962Shaft, Conveyor Drive TB (Qty 1)*M9963Shaft, Conveyor Idle TB (Qty 1)31M0109Sprocket, Motor Drive, 12 Tooth (Qty 1, SB)(Qty 2, TB/Split Belt)M0110Sprocket, Conveyor Drive, 15 Tooth (Qty 1) 32M0108Sprocket, Conveyor Belt, 11 Tooth(Qty 18SB) (Qty 20 TB/Split Belt)M1865Sprocket, Conveyor Drive, 15 Tooth (Qty 1)TB/Split Belt21303Sprocket, Motor Drive, High Speed 12 Tooth(Qty 1, SB) (Qty 2, TB/Split Belt)M0122Rulon Bearing (Goes on conveyor)CONVECTION COMPONENTSRef.PartNo.No.Description33M4224Motor & Blower Assy., CW MT3870 Qty 2 34M4225Motor & Blower Assy., CCW MT3870 Qty 2MT3855G Qty 3 For ovens before 02/27/94 M5419Motor & Blower Assy., CCW MT3855GQty 3 For ovens after 02/27/94M9847Convection Blower Kit High Altitude MT3870M10203Convection Blower Kit High Altitude MT3855M2564Capacitor, Motor MT3870 (Qty 4)M6781Cooling Blower Kit MT387014M6381Cooling Blower only (no hardware) MT3870 M5722Insulation Kit for Blowers MT3870 (Qty 1)M7991Insulation Kit for Blowers MT3855G (Qty 1) 35M6466Nozzle Assy. w/ Diverter MT3870 (Qty 14)Gen MktM5466Nozzle Assy w/ Diverter MT3855G (Qty 12)(Before 11/14/95)M7105Nozzle Assy w/ Diverter MT3855G (Qty 6)(After 11/14/95) (one hole in end)(See L-497)M7106Nozzle Assy w/ Diverter MT3855G (Qty 6)(After 11/14/95) (two holes in end)(See L-497)NOTE:Parts M7105 and M7106 alternate throughthe oven. There is no left or right.MT3870 & MT3855G DOMESTIC AND GENERAL EXPORT CONTROL BOX (CONTROL PLATE AND/OR GAS BURNER COMPONENTS NOT SHOWN)M6381 DOM 14M0109 31M015211M329612M0984 3M059510M7283 EXP92M10082 DOM25M3128 EXP 93AIR PLATES & BAKING COMPONENTS Ref.PartNo.No.Description37M6470Plate Assy, Air RH MT3870 Gen Mkt (Qty 1)38M6469Plate Assy, Air LH MT3870 Gen Mkt (Qty 1) M10531Plate Assy, Air LH (L-R) MT3870 Papa Gino'sM10532Plate Assy, Air RH (L-R) MT3870 Papa Gino'sM10533Plate Assy, Air LH (R-L) MT3870 Papa Gino'sM10534Plate Assy, Air RH (R-L) MT3870 Papa Gino'sNOTE:The Papa Gino's Air Plate Assy's use the GenMkt block offs M6597.M5767Plate Assy, Air RH (R to L) MT3855GGen Mkt (Before 2/27/98)M9489Plate Assy, Air RH (R to L) MT3855GGen Mkt (After 2/27/98)M5768Plate Assy, Air LH (R to L) MT3855GGen Mkt (Before 2/27/98)M9488Plate Assy, Air LH (R to L) MT3855GGen Mkt (After 2/27/98)M5649Plate Assy., Air LH (L to R) MT3855Gen Mkt (Before 2/27/98)M5648Plate Assy, Air RH (L to R) MT3855Gen Mkt (Before 2/27/98)M9490Plate Assy, Air LH (L to R) MT3855Gen Mkt (After 2/27/98)M9491Plate Assy, Air RH (L to R) MT3855Gen Mkt (After 2/27/98)24613Hook, Air Pan (Qty 1)39M6597Plate Assy, Block Off MT3870 Gen. Mkt.(Qty 6)M6079Plate Assy, Block Off MT3855 Gen. Mkt.(Qty 6)M7399Hold Down, Nozzle MT3870 (Qty 1)M5486Hold Down, Nozzle MT3855G (Qty 1)(Before 11/14/95)M7380Hold Down, Nozzle MT3855G (Qty 1)(After 11/14/95)36M3106Diverter, Air LH & RH MT3870(Qty 2 All ovens)MT3855G (Qty 2) (Before 11/14/95)M5179Diverter, Air LH & RH MT3855G (Qty 2)(Before 11/14/95)M7372Diverter, Air LH MT3855G (Qty 1)(After 11/14/95) (See L-495 & L-496)M7374Diverter, Air RH MT3855G (Qty 1)(After 11/14/95) (See L-495 & L-496)M5453Diverter, Air CTR MT3855G (Qty 1)(Before 11/14/95)M7373Diverter, Air CTR MT3855G (Qty 1)(After 11/14/95) (See L-495 & L-496)GAS BURNER COMPONENTS Ref.PartNo.No.Description40M10075Burner Assy, Complete Nat40M10079Burner Assy, Complete LP41M0767Blower Motor, Comb. w/ Control Box (Qty 1) 42M2383Blower Motor, Combustion (Qty 1)43M2381Transformer, 120V to 24V (Qty 1)44M2382Relay, Time Delay (Qty 1)45M0454Orifice, Main Burner LP MT387045M0455Orifice, Main Burner Nat MT3870M0579Orifice, Main Burner LP MT3855M0580Orifice, Main Burner Nat MT385546M2727Pilot Burner & Ignitor Assy., LP (Qty 1)46M2726Pilot Burner & Ignitor Assy., Nat (Qty 1)47M6378Shield, Pilot Burner (Qty 1)48M0415Flame Sensor (Qty 1)19677Wire, Flame Sensor (Qty 1)49M2690Orifice, Pilot LP (Qty 1)49M0697Orifice, Pilot Nat (Qty 1)50M0248Tube, Pilot Aluminum 1/4" (1.583 Feet) 5121225Fitting, Elbow544588Nipple, Pipe 3/4 x 1-3/8 Close(Qty 3 or CE Qty 2)55M0280Tee, 3/4 x 3/4 x 1/4 (Qty 1)56M0278Bushing, 1/4 x 1/8 Hex (Qty 2)57M0281Plug, Pipe 1/8 Black (Qty 2)5817874Ell, Black 1/2 x 3/4 (Qty 1)59M0590Nipple, Pipe 1/2 x 2-1/2 (Qty 1)60M0279Union, 1/2 Inch Black (Qty 1)611949Nipple, Pipe 1/2 x 1-3/16 Close (Qty 1)62M0317Elbow, 1/2 Inch Street 90 Deg (Qty 1) 6321278Nipple, Pipe 1/2 x 3-1/2 (Qty 1)64M3238Tee, 1/2 x 1/2 x 1/4 (Qty 1)6523007Spring, Solenoid Valve, LP to Nat (Qty 1) 6518612Spring, Solenoid Valve, Nat to LP (Qty 1) 23114Conversion Kit, LP to Nat MT3870 (Qty 1)21389Conversion Kit, Nat to LP MT3870 (Qty 1)M5259Conversion Kit, LP to Nat MT3855G (Qty 1)M5290Conversion Kit, Nat to LP MT3855G (Qty 1)21242Connector Kit, Gas Flex 48" (Qty 1)21826Connector Kit, Gas Flex 36" (Qty 1)69M7280Flame Tube Assy., MT3870 (Qty 1)M7390Flame Tube Assy., MT3855G (Qty 1)66M0282Valve, Manual Gas (Qty 1)67M5495Dual Solenoid/Pressure Regulator, Nat 24V(Qty 1)6722190Dual Solenoid/Pressure Regulator, LP 24V(Qty 1)68M1054Spark Box, Johnson (Qty 1)MT3870 & MT3855G DOMESTIC GAS BURNER COMPONENTS(CONTROL BOX NOT SHOWN)M028266458854M076741M238342M031762M028157M027856M54952219067M027*********458854M10075M1007940M2727, M272646M637847M041548M2690, M069749M0454M045545M3238642127863M0248502300765194961M0590591787458M028055M027856M028157M238143M238244INSIDE BOXINSIDE BURNER2122551EXTERIOR COMPONENTS-CONT'D.Ref.Part No.No.DescriptionM2824Crumb Pan, Idle MT3870 w/Holes (Before 9/15/95)79M6168Crumb Pan, Idle MT3870 w/Holes (After 9/15/95)M2823Crumb Pan, Drive MT3870 w/Holes (Before 9/15/95)80M6167Crumb Pan, Drive MT3870 w/Holes (After 9/15/95)M9454Crumb Pan, Idle MT3870G Sld M9453Crumb Pan, Drive MT3870G Sld M6910Crumb Pan, Idle MT3855G w/Holes M6906Crumb Pan, Drive MT3855G w/Holes M10144Crumb Pan, Drive MT3855G Sld M10145Crumb Pan, Idle, MT3855G SldM5612Plug Assy, Lower RH MT3870 (Qty 1)(Before 9/15/95)81M7276Plug Assy, Lower RH MT3870 (Qty 1)(After 9/15/95)82M5612Plug Assy, Lower LH MT3870 (Qty 1)M7386Plug Assy, Lower MT3855G (Qty 2)83M3116Plug Assy, Upper MT3870/MT3855G (Qty 2)84M2640Air Curtain, Upper End Plug (Qty 2)M7150Support Assy, Upper End Plug LH (MT3870, Qty 2) (MT3855, Qty 1)M7149Support Assy, Upper End Plug RH (MT3870, Qty 2) (MT3855, Qty 1)M3724Handle, End Plug (Qty 2)M4633Panel & Filter Assy. (Qty 1) MT3870 (All) &MT3855G (Before 11/14/95)M5485Panel & Filter Assy. MT3855G (After 11/14/95)M5355Control Box Cover w/ Louvers MT3855G (Qty 1) (Before 11/14/95)M6799Control Box Cover w/ Access Door MT3855G (Qty 1) (After 11/14/95)M2780Control Box Cover w/ Louvers MT3870 (Qty 1) (Before 9/15/95)86M7266Control Box Cover w/ Access Door MT3870(Qty 1) (After 9/15/96)87M6035Latch, Access Door (Qty 1)M2689Body Back, MT3870 (Qty 1) (Before 9/15/95)M7254Body Back, MT3870 (Qty 1) (After 9/15/95)M4248Body Back, MT3855G (Qty 1)EXCLUSIVE TO PIZZA HUTLB - LIGHTNING BOLTRef.Part No.No.DescriptionM8729Nozzle Assy, MT3870 L-R or R-L (Qty 7) LB M8730Nozzle Assy, MT3870 L-R or R-L (Qty 7) LB M6926Hold Down, Nozzle MT3870 LBM8674Plate Assy, Air LH (R-L) MT3870 PH LB M8675Plate Assy, Air RH (R-L) MT3870 PH LB M8711Plate Assy, Air LH (L-R) MT3870 PH LB M8712Plate Assy, Air RH (L-R) MT3870 PH LB M8796Diverter Assy LB (Qty 1)M8797Diverter Assy LB (Qty 1)M7376Plate Assy, Air LH (R-L) MT3855M7110Plate Assy, Air RH (R-L) MT3855M7377Plate Assy, Air RH (L-R) MT3855M7109Plate Assy, Air LH (L-R) MT3855M2467Cord Set, Hood InterlockEXTERIOR COMPONENTSRef.Part No.No.Descriptiont M2868Door Assembly, Pull Down S/S (used w/enclosed Greenheck hood system) (Qty 1)M2188Handle Kit, Door 2" (used w/ M2868) (Qty 1)70t M3944Door Assembly (used w/ false front) (Qty 1)71M4275Handle Kit, Door 22" (used w/ M3944) (Qty 1)72M1871Plate, RH Pivot Slotted (Qty 1)73M1872Plate, LH Pivot Slotted (Qty 1)35184Window Bracket Kit (L & R) (for handle)74M3602Bracket Assy., Mounting (Qty 2) LH 75M3603Bracket Assy., Mounting (Qty 2) RH M5475Filter Assy., MT3855G (Qty 1)(Before 11/14/95)76M3751False Front Assy., MT3870 (Qty 1)M4563False Front Assy., MT3855G (Qty 1)M3951Tape, Closed Cell FoamM5032Chimney Kit, Sgl (Before 11/95)M7464Chimney Kit, Sgl (After 11/95)M7160Chimney Kit, Dbl (Before 11/95)M5634Chimney Kit, Dbl MT3855 Prior to 11/95M7463Chimney Kit, Dbl (Qty 1) (After 11/95)21390Legs, 17-1/4" w/ Casters (Dbl) (Set of 4)21391Legs, 23-1/4" w/ Casters (Sgl) (Set of 4)14444Casters, Cradle (Tpl Oven) (Set of 4)22229Stacking Assy., Dbl (Qty 1)77M3783Stop, Product S/S (Qty 1)78M3779Extension Assy., Product 6" (Qty 1)M4223Extension Assy., Product 10" (Qty 1)M7575Extension Assy., Product 15" (LaRosa's)(Qty 1)M10059Extension Assy., Product 20" (Qty 1)MT3870 EXTERIOR OVEN VIEWM659739M647037M728069M726686M646938M659739M615427M646635M616780M6474 DOM 1M7880 CE103M101972M310636M187172M375176M360375M360274M615528M727220M377978M616879M394470M378377M633819M187273M427571M4225 DOM 34M4598 EXP 90M4224 DOM 33M4597 EXP 89M603587M264084EXCLUSIVE TO EXPORT - Cont'dRef.Part No.No.DescriptionM9531Harness, Blower (MT3870) Australia M9753Gas Conversion Kit, Nat to LP/But CE M9767Gas Conversion Kit, LP/But to Nat CE 120M6029Connector, Liquid Tight (Qty 1) CE 12110809Nipple, Pipe 1/2 x 2 (Qty 1) CE122M2835Fitting, Elbow 90 Street 1/8" (Qty 1) CE 123M3443Bushing, Adapter (Qty 2) CE 124M2841Fitting, Pressure Tap (Qty 2) CE91M9182Gas Valve (replaces M6117) CE & Export After 10/08/9791M6000Gas Valve, Combination 240V NAT 50 HZ Before 10/08/9791M6001Gas Valve, Combination 240V LP 50 HZ Before 10/08/97M8744Leg & Caster Kit, 17 1/4" CE M8745Leg & Caster Kit, 23 1/4" CEM10225Plate Assy, Air (L-R), LH Dominos Australia M8712Plate Assy, Air (L-R), RH Dominos Australia M8675Plate Assy, Air (R-L), LH Dominos Australia M10224Plate Assy, Air (R-L), RH Dominos Australia M10199Block Offs, Qty 3, Dominos AustraliaEXCLUSIVE TO EXPORTRef.Part No.No.Description88M10070Burner Assy, Complete Nat CE 88M10072Burner Assy, Complete LP CEM10069Burner Assy, Complete Nat Australia M10080Burner Assy, Complete LP Australia NOTE:Use Lit-683 with Australian Burners.M10074Burner Assy, Complete Nat Gen Exp M10077Burner Assy, Complete LP Gen Exp89M4597Motor & Blower Assy., CW MT3870 (Qty 2)90M4598Motor & Blower Assy., CCW MT3870 (Qty 2)92M7283Blower, Cooling Export (Qty 1)93M3128Motor, Conveyor Drive Bodine, 180V (Qty 1)94M3153Digital Speed Control Board, Bodine (Qty 1)95M2630Fuse, Line, Bodine Board, 500 MA, 250V (Qty 1) CE96M2316Fuse, Armature, 200 MA,250V (Qty 1) CEM5717Board, Relay (Open Loop) SB (Qty 1)97M7282Board, Relay (Closed Loop) SB (Qty 1)98M8704Fuse, 250V, 125 MA (Qty 1) CE (Replaces M8652)99M6024Transformer, 220V to 24V (Qty 1) (for M7282)10020350Buzzer, 240V (Qty 1)101R1580Stop, End (Qty 1)102M6449Filter, Noise (Qty 1) E & G CE M6448Filter, Noise (Qty !) E CE103M7880Computer Control Kit, Closed Loop SB CE 104M7888Relay, 1 Second Time Delay 3PDT (Qty 1) CE105M2386Blower Motor, Combustion (Qty 1) CE 106M7333Pilot Burner & Ignitor Assy., LP (Qty 1) CE 106M7334Pilot Burner & Ignitor Assy., Nat (Qty 1) CE 107&M10544Reset Switch Kit, Push Button & Contact 108(Qty 1) CE, Replaces M2497 & M2498M0595Air Pressure Switch (All gas ovens)M9978Conversion Kit, Air Pressure Differential Switch (Replaces M3330 & M2819) CE 109M9422Air Pressure Differential Switch, switch only (Qty 1) CEM9705PolyurethaneTubing, used w/pressure switch (Per Foot, total 3 FT) CE 110M0706Orifice, Main Burner (Specify MTD)(Qty 1) CE111R0164Terminal Block, Power (Qty 2) CE 112R0166Terminal Block, Ground (Qty 1) CE113M3168Spark Box, 240V (Landis & Gyr) (Qty 1) CE 114M2247Contactor, 240V, 50 HZ (Qty 1) CE & Aust 18265Indicator Light, 28V, Red, Round (Qty 1) CE 11616037Indicator Light, 250V, Red, Round (Qty 1)CE & Australia11716775Relay, SPST, 240V, 30 Amp. (Qty 1) CE 118M3172Timer, Fixed, 2 Second (Qty 1) CE 119M3173Timer, Fixed, 10 Second (Qty 1) CE M6589Plate Assy., Control SB (Qty 1) CE M7323Plate Assy., Control SB (Qty 1) Australia M6982Piping Assy. (Qty 1) CEMT3870 & MT3855G CE GAS BURNER COMPONENTS(CONTROL BOX NOT SHOWN)10809121M0279601949611787458M028055M031762458854M027856M3443123M2841124M3443123M2835122M238610516037116M10070M1007288M2841124458854M7333, M7334106M637847M041548M2690, M069749M07061102122551M027856M3238642127863M02485091INSIDE BURNERM6000M6001M9182M3173119M3172118M13629M059313M32958M315394M231696M263095226725M728297M870498M602499M2247114M3168113M78881041677511720350100MT3870 & MT3855G CE SB CONTROL PLATE ASSY (M6589)MT3870 & MT3855G CE CONTROL BOX(CONTROL PLATE AND/OR GAS BURNER COMPONENTS NOT SHOWN)M9422109M6449102M6029120R016411116037116M2497107M2498108R0166112R1580101(SEE DOMESTIC CONTROL BOX FOR ADDITIONAL COMPONENTS)。
Samsung电视用户操作手册说明书
ENGUSER MANUALThank you for purchasing this Samsung product.To receive more complete service, please register your product at Model Serial No.If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.Figures and illustrations are provided for reference only and may differ from the actual product appearance.Product design and specifications may change without notice.© 2022 Samsung Electronics Co., Ltd. All rights reserved.Before Reading This UserManualThis TV comes with this User Manual and an embeddede-Manual ( > Menu > Settings > Support > Opene-Manual).On the website (), you can download themanuals and see its contents on your PC or mobile device.Warning! ImportantSafety InstructionsPlease read the Safety Instructions before using your TV.Refer to the table below for an explanation of symbols whichmay be on your Samsung product.CAUTIONRISK OF ELECTRIC SHOCK. DO NOT OPEN.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK). THERE ARENO USER SERVICEABLE PARTS INSIDE. REFER ALLSERVICING TO QUALIFIED PERSONNEL.This symbol indicates that high voltage ispresent inside. It is dangerous to make anykind of contact with any internal part ofthis product.This symbol indicates that this producthas included important literatureconcerning operation and maintenance.Class II product: This symbol indicatesthat a safety connection to electrical earth(ground) is not required. If this symbolis not present on a product with a powercord, the product MUST have a reliableconnection to protective earth (ground).AC voltage: Rated voltage marked withthis symbol is AC voltage.DC voltage: Rated voltage marked withthis symbol is DC voltage.Caution. Consult instructions for use: Thissymbol instructs the user to consult theuser manual for further safety relatedinformation.Power•Do not overload wall outlets, extension cords, or adaptorsbeyond their voltage and capacity. It may cause fire orelectric shock. Refer to the power specifications section ofthe manual and/or the power supply label on the productfor voltage and amperage information.•Power-supply cords should be placed so that they are notlikely to be walked on or pinched by items placed upon oragainst them. Pay particular attention to cords at the plugend, at wall outlets, and at the point where they exit fromthe appliance.•Never insert anything metallic into the open parts of thisapparatus. This may cause electric shock.•To avoid electric shock, never touch the inside of thisapparatus. Only a qualified technician should open thisapparatus.•Be sure to plug in the power cord until it is firmly seated.When unplugging the power cord from a wall outlet,always pull on the power cord's plug. Never unplug it bypulling on the power cord. Do not touch the power cordwith wet hands.•If this apparatus does not operate normally - in particular,if there are any unusual sounds or smells coming from it -unplug it immediately and contact an authorized dealer orSamsung service center.•To protect this apparatus from a lightning storm, or toleave it unattended and unused for a long time, be sure tounplug it from the wall outlet and disconnect the antennaor cable system.–Accumulated dust can cause an electric shock, anelectric leakage, or a fire by causing the power cord togenerate sparks and heat or by causing the insulationto deteriorate.•Use only a properly grounded plug and wall outlet.–An improper ground may cause electric shock orequipment damage. (Class l Equipment only.)•To turn off this apparatus completely, disconnect it fromthe wall outlet. To ensure you can unplug this apparatusquickly if necessary, make sure that the wall outlet andpower plug are readily accessible.Installation•Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.•Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.•Do not expose this apparatus to rain or moisture.•Be sure to contact an authorized Samsung service center for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failure to do so may lead to serious damage to your TV.•Do not expose this apparatus to dripping or splashing. Mounting the TV on a wallIf you mount this TV on a wall, followthe instructions exactly as set out by themanufacturer. If it is not correctly mounted,the TV may slide or fall and cause seriousinjury to a child or adult and serious damageto the TV.•To order the Samsung wall mount kit, contact Samsung service center at 1-800-SAMSUNG (1-800-726-7864).•Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you choose to install the wall mount on your own.•Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or when the consumer fails to follow the product installation instructions.•You can install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.Safety PrecautionCaution: Pulling, pushing, or climbingon the TV may cause the TV to fall. Inparticular, ensure your children do nothang on or destabilize the TV. This actionmay cause the TV to tip over, causingserious injuries or death. Follow allsafety precautions provided in the SafetyFlyer included with your TV. For addedstability and safety, you can purchaseand install the anti-tip device, referringto "Preventing the TV from falling."WARNING: Never place a television set in anunstable location. The television set may fall,causing serious personal injury or death. Manyinjuries, particularly to children, can be avoidedby taking simple precautions such as:•Always use cabinets or stands or mounting methodsrecommended by Samsung.•Always use furniture that can safely support the televisionset.•Always ensure the television set is not overhanging theedge of the supporting furniture.•Always educate children about the dangers of climbingon furniture to reach the television set or its controls.•Always route cords and cables connected to yourtelevision so they cannot be tripped over, pulled orgrabbed.•Never place a television set in an unstable location.•Never place the television set on tall furniture (forexample, cupboards or bookcases) without anchoringboth the furniture and the television set to a suitablesupport.•Never place the television set on cloth or other materialsthat may be located between the television set andsupporting furniture.•Never place items that might tempt children to climb,such as toys and remote controls, on the top of thetelevision or furniture on which the television is placed.If the existing television set is going to be retained andrelocated, the same considerations as above should beapplied.•When you have to relocate or lift the TV for replacement orcleaning, be sure not to pull out the stand.•When installing a wall mount kit, we recommend youfasten all four VESA screws.•If you want to install a wall mount kit that attaches to thewall using two top screws only, be sure to use a Samsungwall mount kit that supports this type of installation. (Youmay not be able to purchase this type of wall mount kit,depending on the geographical region.)•Do not mount the TV at more than a 15 degree tilt.•Standard dimensions for wall mount kits are shown in thetable on the Quick Setup Guide.Do not install your wall mount kit while your TVis turned on. This may result in personal injuryfrom electric shock.•Do not use screws that are longer than the standarddimension or do not comply with the VESA standardscrew specifications. Screws that are too long may causedamage to the inside of the TV set.•For wall mounts that do not comply with the VESAstandard screw specifications, the length of the screwsmay differ depending on the wall mount specifications.•Do not fasten the screws too firmly. This may damage theproduct or cause the product to fall, leading to personalinjury. Samsung is not liable for these kinds of accidents.•Always have two people mount the TV onto a wall.–For 82 inch or larger models, have four people mountthe TV onto a wall.Providing proper ventilation for your TVWhen you install your TV, maintain a distance of at least4 inches (10 cm) between the TV and other objects (walls,cabinet sides, etc.) to ensure proper ventilation. Failing tomaintain proper ventilation may result in a fire or a problemwith the product caused by an increase in its internaltemperature.•When you install your TV with a stand or a wall mount, westrongly recommend you use parts provided by SamsungElectronics only. Using parts provided by anothermanufacturer may cause difficulties with the product orresult in injury caused by the product falling.Preventing the TV from fallingWall-anchor(not supplied)1. Using the appropriate screws, firmly fasten a set ofbrackets to the wall. Confirm that the screws are firmlyattached to the wall.–You may need additional material such as wall anchorsdepending on the type of wall.2. Using the appropriately sized screws, firmly fasten a set ofbrackets to the TV.–For the screw specifications, refer to the standardscrew part in the table on the Quick Setup Guide.3. Connect the brackets fixed to the TV and the bracketsfixed to the wall with a durable, heavy-duty string, andthen tie the string tightly.–Install the TV near the wall so that it does not fallbackwards.–Connect the string so that the brackets fixed to thewall are at the same height as or lower than thebrackets fixed to the TV.Contact SAMSUNG WORLD WIDECountry Samsung Service Center Web Site AddressU.S.A1-800-SAMSUNG (726-7864)/us/support Samsung Electronics America, Inc.85 Challenger Road Ridgefield Park, NJ 07660Accessibility contact information in U.S.A. : accessibility@If you experience issues, please do not take the TV back to the store.In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or visit us at or www.samsung. com/spsn for support and warranty service.-01–If your access point or modem has a standby mode button, use it to disconnect your home network from the Internet when it is not in use.•Use strong passwords for all your Internet accounts (Netflix, Facebook, etc.).•If any unexpected messages appear on your TV screen requesting permission to link a device or enable a remote session, do NOT accept.•Do not visit suspicious web sites and do not install any suspicious programs. We recommend that users install only those authorized apps provided by Samsung through Samsung Smart Hub.Operation•This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information. •Store the accessories (remote control, or etc.) in a location safely out of the reach of children.•Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung service center.•Do not dispose of remote control or batteries in a fire. •Do not short-circuit, disassemble, or overheat the batteries.•CAUTION : There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type. •WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.Caring for the TV•To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergents. These chemicals can damage the appearance of the TV or erase the printing on the product.•The exterior and screen of the TV can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches.•Do not spray water or any liquid directly onto the TV. Any liquid that goes into the product may cause a failure, fire, or electric shock.01 Initial SetupWhen you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on the screen and configure the TV's basic settings to suit your viewing environment.Using the TV ControllerYou can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu . The Control menu appears when the TV Controller button is pressed while the TV is On.•The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not removed. Please remove the protective film.Control menuTV Controller button / Remote control sensor / Microphone switchHow to turn on and off the MicrophoneType AOn Off Type BOn OffYou can turn on or off the microphone by using the switch at the bottom of the TV. If microphone is turned off, All voice and sound features using microphone are not available. •This function is supported only in Q7*B/Q8*B/QN8*B/QN9*B Series.•The position and shape of the microphone switch may differ depending on the model.•During analysis using data from the microphone, the data is not saved.Internet securitySamsung takes a number of steps to protect its Internet-compatible Smart TVs against unauthorized incursions and hacking. For example, certain sensitive communications between the TV and the Internet servers are encrypted. In addition, the TV’s operating system has adopted controls to prevent the installation of unauthorized applications.Although we take steps to protect your Smart TV and personal information, no Internet-connected device or transmission is completely secure. We therefore encourage you to take additional steps to safeguard your TV, secure your Internet connection, and minimize the risk of unauthorized access. These steps are listed below:•When Samsung releases software updates to improve the security of your TV, you should promptly install these updates. To automatically receive these updates, turn on Auto Update in the TV's menu (>Menu >Settings > Support > Software Update > Auto Update ). When an update is available, a popup message appears on the TV screen. Accept the software download and update by selecting Yes when prompted. Take steps to secure your wireless access point and network. Your access point's manual should provide additional details about how to implement the following measures: –Secure your wireless access point's management settings with a unique password to prevent unauthorized changes to security related settings. –Implement standard encryption (e.g., WPA2 encryption) on your wireless access point to secure your wireless network signal.–Secure access to your wireless network with a hard-to-guess password.–Confirm your access point's firewall setting is enabled (if so equipped).–Make sure that all your Internet-connected devices are behind your network's firewall.02 Troubleshooting and MaintenanceTroubleshootingFor more information, refer to "Troubleshooting " or "FAQ " in the e-Manual. >Menu >Settings > Support > Open e-Manual >Troubleshooting or FAQIf none of the troubleshooting tips apply, please visit "" and click Support or contact the Samsung service center.•This TFT LED panel is made up of sub pixels which require sophisticated technology to produce. There may be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.•To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto Update functions on the TV's menu ( >Menu >Settings> Support > Software Update > Update Now or AutoUpdate ).The TV won’t turn on.•Make sure that the power cord is securely plugged in to the TV and the wall outlet.•Make sure that the wall outlet is working and the remote control sensor at the bottom of the TV is lit and glowing a solid red.•Try pressing the TV Controller button at the bottom of the TV to make sure that the problem is not with the remote control. If the TV turns on, refer to "The remote control does not work."03 Specifications and Other InformationSpecificationsDisplay Resolution3840 x 2160Sound (Output)Q6*B/Q7*B Series: 20 W Q8*B Series: 60 W (50": 40 W)QN85BA Series: 60 W QN85BD Series: 70 WQN90BA Series: 60 W (43": 20 W, 50": 40 W)QN90BD Series: 70 W (43": 20 W, 50": 40 W)Operating Temperature50 °F to 104 °F (10 °C to 40 °C)Operating Humidity10 % to 80 %, non-condensingStorage Temperature-4 °F to 113 °F (-20 °C to 45 °C)Storage Humidity5 % to 95 %, non-condensing Notes•This device is a Class B digital apparatus.•For information about the power supply, and more information about power consumption, refer to the information on the label attached to the product. –On most models, the label is attached to the back of the TV. (On some models, the label is inside the cover terminal.)•To connect a LAN cable, use a CAT 7 (*STP type) cable for the connection. (100/10 Mbps)* Shielded Twisted Pair•The images and specifications of the Quick Setup Guide may differ from the actual product.The remote control does not work.•Check if the remote control sensor at the bottom of the TV blinks when you press the button on the remotecontrol.–When the remote's battery is discharged, charge the battery using the USB charging port (C-type), or turn over the remote to expose the solar cell to light. •Try pointing the remote directly at the TV from 5 ft. to 6 ft. (1.5-1.8 m) away.•If your TV came with a Samsung Smart Remote (Bluetooth Remote), make sure to pair the remote to the TV. To pair a Samsung Smart Remote, press the andbuttonstogether for 3 seconds.Eco Sensor and screen brightnessEco Sensor adjusts the brightness of the TV automatically. This feature measures the light in your room and optimizes the brightness of the TV automatically to reduce power consumption. If you want to turn this off, go to >Menu>Settings > All Settings > General & Privacy > Power andEnergy Saving > Brightness Optimization .•The eco sensor is located at the bottom of the TV. Do not block the sensor with any object. This can decrease picture brightness.Decreasing power consumptionWhen you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of power. To decrease power consumption, unplug the power cord when you don't intend to use the TV for a long time.LicensesThe terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.。
Samsung Electronics 产品说明书
Table of Contents ................................................................................................................................................................... 3 List of Figures .......................................................................................................................................................................... 4 List of Tables ........................................................................................................................................................................... 4 Version History .. (5)Handling Guide ....................................................................................................................................................................... 6 ARTIK 530 Development Board Overview (7)features (7)Block diagram ....................................................................................................................................................................................... 8 Mechanical Drawings ........................................................................................................................................................................... 9 ARTIK 530 Module ................................................................................................................................................................ 11 ARTIK 530 Module Specification ........................................................................................................................................................ 11 ARTIK 530 Development Board Interposer Board .. (12)Interposer Board Boot mode Configuration .................................................................................................................................... 13 USB OTG ............................................................................................................................................................................................... 14 HDMI 1.4a ............................................................................................................................................................................................ 14 LVDS ..................................................................................................................................................................................................... 15 Ethernet................................................................................................................................................................................................ 15 Antenna ................................................................................................................................................................................................ 16 ARTIK 530 Development Board Platform Board .. (17)Configuration of External Power Source .......................................................................................................................................... 18 SD-Card Interface................................................................................................................................................................................ 19 EarJack Interface ................................................................................................................................................................................. 19 MIPI DSI/CSI Interface ......................................................................................................................................................................... 19 USB Host 2.0 Interface ....................................................................................................................................................................... 21 Connector to IF Board Interface ........................................................................................................................................................ 22 ARTIK 530 Development Environment IF Board .............................................................................................................. 23 Preview on the ARTIK IF board .......................................................................................................................................................... 23 Configuration of external Power Source .......................................................................................................................................... 24 ARTIK 530 Development Board Booting (25)Serial Port Connection ....................................................................................................................................................................... 25 Terminal Emulator Installation ......................................................................................................................................................... 26 Power on the ARTIK 530 Development Board.................................................................................................................................. 27 Legal Information .. (29)Figure 1. Preview of the ARTIK 530 Development Board .................................................................................................... 7 Figure 2. ARTIK 530 Development Board .............................................................................................................................. 8 Figure 3. Mechanical Drawing ARTIK 530 Development Board and Interposer Board all dimensions are in [mm] .. 9 Figure 4. Mechanical Drawing ARTIK 530 Development Board Platform Board all dimensions are in [mm] .......... 10 Figure 5. ARTIK 530 Development Board Interposer Board Left Top Side, Right Bottom Side .................................. 12 Figure 6. ARTIK 530 Development Board Booting Switch Location ................................................................................ 13 Figure 7. USB OTG Interface location on the Interposer Board ...................................................................................... 14 Figure 8. HDMI 1.4a Interface location on the Interposer Board ................................................................................... 14 Figure 9. LVDS Interface location on the Interposer Board ............................................................................................. 15 Figure 10. Ethernet Interface location on the Interposer Board .................................................................................... 15 Figure 11. Antenna location on the Interposer Board ..................................................................................................... 16 Figure 12. ARTIK 530 Development Board Platform Board Left Bottom Side, Right Top Side ................................... 17 Figure 13. Jumper Interface locations JP1-JP4 on Connectors J702, J703 of the Platform Board ............................... 18 Figure 14. SD-Card Interface location on the Platform Board ........................................................................................ 19 Figure 15. Ear Jack Interface location on the Platform Board ......................................................................................... 19 Figure 16. MIPI DSI Interface location on the Platform Board ........................................................................................ 20 Figure 17. MIPI CSI Interface Location on the Platform Board ....................................................................................... 20 Figure 18 USB2.0 Interface location on the Platform Board ........................................................................................... 21 Figure 19. Expansion Connector Interface location on the Platform Board ................................................................. 22 Figure 20. ARTIK 530 Development Board IF Board ......................................................................................................... 23 Figure 21. Jumper Interface locations J20, J21 on the IF Board ....................................................................................... 24 Figure 22. Typical Linux® Serial Console ........................................................................................................................... 25 Figure 23. USB Serial Cable hooked up to the Platform Board ....................................................................................... 26 Figure 24 Connection Power adaptor with development Board .................................................................................... 27 Figure 25. Power switch location on the development Board ........................................................................................ 28 Figure 26. Power button location on the development Board (28)Table 1. Main Features of the ARTIK 530 Module ............................................................................................................. 11 Table 2. Boot option that can be set on the Interposer Board ....................................................................................... 13 Table 3 Antenna spec ........................................................................................................................................................... 16 Table 4. Connector J2 ............................................................................................................................................................ 23 Table 5. Connector J3 (24)Precaution against Electrostatic DischargeWhen using the Samsung ARTIK ™ 530 Development Board, ensure that the environment is protected against static electricity: ContaminationDo not use the ARTIK 530 Development Board in an environment exposed to dust or dirt adhesion. Temperature/HumidityThe ARTIK 530 Development Board is sensitive to:1. Environment2. Temperature3. HumidityHigh temperature or humidity deteriorates the characteristics of ARTIK 530 Development Board, therefore, do not store or use the ARTIK 530 Development Board under such conditions. Mechanical ShockDo not to apply excessive mechanical shock or force to the ARTIK 530 Development Board. ChemicalDo not expose the ARTIK 530 Development Board to chemicals. Exposure to chemicals leads to reactions that deteriorate the characteristics of the ARTIK 530 Development Board. EMS (Electro Magnetic Susceptibility)Strong electromagnetic waves or magnetic fields may affect the characteristics of the ARTIK 530 Development Board during the operation under insufficient PCB circuit design for Electro Magnetic Susceptibility (EMS).The ARTIK 530 Development Board consists of one Interposer Board, one Platform Board and one IF Board. The Interposer Board does include the ARTIK 530 Module. The ARTIK 530 Development Board is an affordable approach for developing an IoT solution. Figure 1 shows the form factors of the various boards that make up the ARTIK 530 Development Board.Figure 2 shows the block diagram of the ARTIK 530 Development Board, if you want more information on the ARTIK 530 Module please consult the ARTIK 530 Module Datasheet.Figure 3 and Figure 4 show the ARTIK 530 Development Board Interposer Board and the Platform Board respectively.The ARTIK 530 Development Board contains the ARTIK 530 Module. This section will describe some of the main features of this module. For more information on the ARTIK 530 Module please consult the ARTIK 530 Module datasheet.The ARTIK 530 Module is designed for IoT devices and it contains a lot of functions based on a Linux ®system. Not only multimedia functions but also network functions for example 802.11 or ZigBee ®. In addition the ARTIK 530 Module has mass storage functionality and its own security solution. Table 1 shows the main features of the ARTIK 530 Module that is part of the ARTIK 530 Development Board.®®®®The Interposer Board as depicted in Figure 5 highlights the most important components on the Interposer board.This section describes the various boot modes that are supported on the ARTIK 530 Development Board. Table 2 and Figure 6 show how to manipulate SW402 and where SW402 is located on the Interposer Board to set the various booting options that are available on the ARTIK 530 Development Board.When ‘eMMc 1st Boot’ is selected as a booting option, the system will first try to boot from eMMc, if this fails the system will search for an SD Card to boot from. If booting from the SD-Card also fails the system tries to boot from USB. When choosing the SD-Card booting option, the system starts with booting from SD, and if this fails will continue to try a USB boot. When USB is selected as the booting mechanism of choice, only a USB boot will be attempted.The Interposer board has one USB OTG connector located as can be seen in Figure 7.The Interposer board has one HDMI 1.4a connector (Micro D-Type) located as can be seen in Figure 8. The following video formats are supported:1.480p/************/60Hz,576p/576i@50Hz2.720p/720i @50Hz/59.94Hz/60HzThe Interposer board has one LVDS Interface containing 5x data channels and one clock channel, its location can be seen in Figure 9. The available maximum resolution is 1920x1080@60fps.The Interposer board has one Ethernet Interface, its location can be seen in Figure 10. The Ethernet Interface is based on 802.3az-2010 complying to the Energy Efficient Ethernet (EEE) standard. The maximum theoretical speed of the interface is 1000Mbps.If 802.11 or Bluetooth® functionality is required, the antenna which is enclosed as part of the ARTIK 530 Development Kit has to be attached to the Interposer board as depicted in Figure 11. More details on the antenna spec is given in Table 3.The Platform Board as depicted in Figure 12 highlights the most important components on the Interposer board.Through selection of the Jumpers JP1-JP4, located on J702, J703, the power source can be selected. When power is provided from a DC-5V Adapter or a Battery, all jumpers are in the 1-2 position. When power is provided from the DC-5V Adapter and at the same time a battery is connected that is being charged (Battery Charging Mode), all jumpers are in the 2-3 position. When the jumpers [JP1-JP4] are in the 1-2 position, (DC-5V Adapter mode or Battery mode) either connect a battery or the DC-5V adapter but never both at the same time. When the jumpers [JP1-JP4] are in the 2-3 position, (Battery Charging Mode) connect both a battery and the DC-5V Adapter.Figure 13 shows the default settings and how to switch between the settings. When the ARTIK 530 Development Board is used with an external power adapter make certain that you use a 5V-5A adapter with a 2.1x5.5mm plug.The Platform board has one SD-CARD interface supporting SD3.0 located as can be seen in Figure 14.The Platform board has one 4 pin ear jack interface supporting stereo audio as can be seen in Figure 15.The Platform board has one MIPI DSI and one MIPI CSI interface. The location of the DSI Display interface can be seen in Figure 16. The location of the MIPI CSI interface can be seen in Figure 17.The MIPI DSI interface can operate at a maximumresolution of WUXGA (1920x1200), whereas the MIPI CSI interface can have a static resolution of 5M pixels or a dynamic resolution for video capturing of 1080P.The Platform board has one USB 2.0 Interface. The location of the USB 2.0 interface can be seen in .The Platform board has one expansion connector that can be seen in Figure 19. This connector enables for expansion possibilities.Figure 20 shows the highlights of the connector IF board. In addition Table 4 with J2 and Table 5 with J3 show the pinout of the connectors with its meaning.Through selection of the Jumpers J20 and J21 you can choose the IO power source (I 2C, UART GPIO) or the XGPIO power source of either, 1.8V, 3.3V or 5V. Figure 21 shows how to set the various jumpers to switch between power sources.This section will describe how to start working with your ARTIK 530 Development Environment by setting up a serial connection on your development PC and booting up the ARTIK 530 Development Environment.As a first step we will select a serial console to communicate with the ARTIK 530 Module that is located on the ARTIK 530Development Environment. You can use a typical Linux ®serial console as depicted in Figure 22, using the serial connector. If your PC does not have a serial port, use the micro-USB B serial cable instead. To use the serial USB cable you need to install the associated device driver. Figure 23 depicts the USB serial cable and where it is hooked up to the Platform Board.Setting up a connection with the ARTIK 530 Module can be done in a wired or wireless manner. Here we choose to install PuTTY a free serial console. The software can be downloaded from /. Once downloaded go through the following steps:1.Open the device manager on the control panel.2.When using a PC install the USB to Serial driver. The driver can be found at the following location:(/Drivers/CDM/CDM21218_Setup.zip). For other drivers please visit(/Drivers/D2XX.htm).3.Check the COM port number on your PC when you connect the USB serial cable. In our case the COM port allocated4.a.Set the “Serial line” as the COM port number found in step 3.b.Set the COM speed to "115200".c.Set the connection type to "Serial".d.Save the session under ARTIK-Pro.5.Select your saved session and click th e “Open” button.To power up the ARTIK 530 Development Environment you first have to connect the power adapter and the Platform Board as shown in Figure 24. In addition make certain that the jumpers JP1-JP4 located on the Platform Board are set in state 1-2 see Configuration of External Power Source section for details.Turn on the power switch as shown in Figure 25.Once the power switch is turned on, push the power button (SW2), as depicted in Figure 26, for about 1 second. Once released the booting process will start and you should see booting messages from your console, using the serial connection that you previously established.INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH THE SAMSUNG ARTIK ™ DEVELOPMENT BOARD AND ALL RELATED PRODUCTS, UPDATES, AND DOCUMENTATION (HEREINAFTER “SAMSUNG PRODUCTS”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. THE LICENSE AND OTHER TERMS AND CONDITIONS RELATED TO YOUR USE OF THE SAMSUNG PRODUCTS ARE GOVERNED EXCLUSIVELY BY THE SAMSUNG ARTIK ™ DEVELOPER LICENSE AGREEMENT THAT YOU AGREED TO WHEN YOU REGISTERED AS A DEVELOPER TO RECEIVE THE SAMSUNG PRODUCTS. EXCEPT AS PROVIDED IN THE SAMSUNG ARTIK ™ DEVELOPER L ICENSE AGREEMENT, SAMSUNG ELECTRONICS CO., LTD. AND ITS AFFILIATES (COLLECTIVELY, “SAMSUNG”) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION CONSEQUENTIAL OR INCIDENTAL DAMAGES, AND SAMSUNG DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, ARISING OUT OF OR RELATED TO YOUR SALE, APPLICATION AND/OR USE OF SAMSUNG PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATED TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.SAMSUNG RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION, DOCUMENTATION AND SPECIFICATIONS WITHOUT NOTICE. THIS INCLUDES MAKING CHANGES TO THIS DOCUMENTATION AT ANY TIME WITHOUT PRIOR NOTICE. THIS DOCUMENTATION IS PROVIDED FOR REFERENCE PURPOSES ONLY, AND ALL INFORMATION DISCUSSED HEREIN IS PROVIDED ON AN “AS IS” BASIS, WITHOUT WARRANTIES OF ANY KIND. SAMSUNG ASSUMES NO RESPONSIBILITY FOR POSSIBLE ERRORS OR OMISSIONS, OR FOR ANY CONSEQUENCES FROM THE USE OF THE DOCUMENTATION CONTAINED HEREIN.Samsung Products are not intended for use in medical, life support, critical care, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply.This document and all information discussed herein remain the sole and exclusive property of Samsung. All brand names, trademarks and registered trademarks belong to their respective owners. For updates or additional information about Samsung ARTIK™, contact the Samsung A RTIK ™ team via the Samsung ARTIK™ website at www.artik.io .Copyright © 2017 Samsung Electronics Co., Ltd.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electric or mechanical, by photocopying, recording, or otherwise, without the prior written consent of Samsung Electronics.。
三星55英寸LED显示器说明书
55吋LED显示器目录重要的安全指示3特别通告..................................................................................................3警告&注意事项........................................................................................3清洁&维护...............................................................................................4管理通知.. (4)概述6检查所供附件..........................................................................................6前控制面板..............................................................................................6电池安装..................................................................................................6后面板连接..............................................................................................7遥控器按纽..............................................................................................8使用OSD 菜单........................................................................................9屏幕状态显示 (9)安装10连接宝利通视频会议系统......................................................................10连接DVD..............................................................................................10连接Codec............................................................................................10连接外接式扩音机.................................................................................11连接外部放大扬声器..............................................................................11连接個人电腦........................................................................................11支持的解析度. (13)菜单系统14画面调整................................................................................................14对各种画面控制设置的说明...................................................................14RGB/HDMI 模式下手动微调..................................................................15了解宽萤幕模式.....................................................................................16系统调整................................................................................................16各种系统设置的说明 (16)附加说明18疑难排解................................................................................................18规格.......................................................................................................19组件定时................................................................................................20RJ-45连接..........................................................................................23命令格式及定序.....................................................................................23尺寸图...................................................................................................25配色方案................................................................................................25包装分解图 (26)特别通告某些程序为版权所有，未经授权全部或部分记录可能导致违反美国和加拿大版权法。
三星5508手机上市培训资料.pptx
3.0 (240*400)
3.2MP AF 1000mAh 230M+MicroSD(最大
16GB) 支持
A-GPS
不支持
内置GPS
2010.1 1698
19 直板触屏
Symbian 9.4 S60 5.0（ S60第五版） 434MHz 3.2(360*640) 2MP AF 1320mAh
三星I5508新品上市市场指引
产品篇—— I5508产品介绍
时尚 3 G 酷毕智能主题词：源自•时尚：外观时尚，引领潮流
•3G： 3G+WLAN高速上网；
•智能：Android 2.1操作系统； 600MHz高速CPU；海量第三方程序支持
核心卖点： 超高性价比的时尚3G智能手机
产品篇——竞品分析
型号
立体声耳机
1GB Micro SD 存储 卡（待确定，以实际
到货配置为准）
• 9、春去春又回，新桃换旧符。在那桃花盛开的地方，在这醉人芬芳的季节，愿你生活像春天一样阳光，心情像桃花一样美丽，日子像桃子一样甜蜜。2 0.11.2020.11.20Friday, November 20, 2020
• 10、人的志向通常和他们的能力成正比例。14:10:0014:10:0014:1011/20/2020 2:10:00 PM • 11、夫学须志也，才须学也，非学无以广才，非志无以成学。20.11.2014:10:0014:10Nov-2020-Nov-20
• 多点触控
• 传感器 - 加速传感器, 接近传感器, 重力传感器
• TouchWiz3.0界面 - Multiple Homescreens - Hybrid Widgets
• 智能解锁
三星多功能一体机用户指南说明书
1.簡介主要優勢6功能（依機型）8好用資訊10關於此使用者指南11安全資訊12機器總覽17控制面板概覽20開啟機器21瞭解 LED 22顯示螢幕與有用的按鈕25瞭解快顯鍵盤29安裝驅動程式31重新安裝驅動程式34網路環境37存取網路設定38透過網路安裝驅動程式45無線網路設定（選用）51準備原稿64裝入原稿65選擇列印媒體68將紙張裝入紙匣中69在特殊紙材上列印73設定紙張大小與類型78輸出位置79印表機驅動程式功能81基本列印82開啟列印喜好設定84特殊列印功能91使用直接列印公用程式98變更預設列印設定100將您的機器設定為預設機器101列印到檔案（PRN）102 Mac 列印103 Linux 列印105 Unix 列印107瞭解影印畫面110基本影印112快速影印114 ID 卡片影印115使用特殊影印功能117使用程式設定122瞭解掃描方法125掃描並透過電子郵件傳送126透過 SMB/FTP 掃描與傳送129掃描並傳送到您的電腦133掃描並傳送到 USB/共用資料夾134變更掃描功能設定136使用程式設定139使用啟用 TWAIN 的軟體掃描140利用 Samsung Easy Document Creator 掃描141 MAC 掃描142 Linux 掃描143準備傳真145透過電腦發送傳真146瞭解傳真畫面148發送傳真150接收傳真155調整文件設定157列印傳真報告159使用程式設定160從控制面板設定通訊錄163從 SyncThru™ Web Service 設定通訊錄16710.透過行動裝置使用機器支援的行動應用程式 185Mopria™ 187AirPrint189Samsung Cloud Print 191Google Cloud Print™194關於 SmarThru Workflow197瞭解 SmarThru Workflow 畫面 198工作表單建立畫面 199瞭解共用資料夾畫面 200使用共用資料夾 201瞭解儲存的文件畫面203在 Stored Document 中儲存文件 204瞭解 USB 畫面 205關於 USB 記憶體裝置 206從 USB 記憶體裝置列印207掃描至 USB 記憶體裝置209功能表總覽 212機器設定217存取管理工具237SyncThru™ Web Service 238Easy Capture Manager 244Samsung AnyWeb Print 245Easy Eco Driver246使用 Samsung Easy Document Creator 247使用 Samsung Printer Center 248使用 Samsung Easy Printer Manager 251使用 Samsung 印表機狀態 253使用 Samsung Printer Experience255訂購耗材與配件262可用的耗材263可用的配件264可用的維護零件265儲存碳粉匣266搖勻碳粉267更換碳粉匣269更換廢碳粉盒272安裝配件274監視耗材壽命279清潔印表機280移動和儲存機器的秘訣285避免卡紙的秘訣287清除卡紙288瞭解螢幕訊息302送紙問題307電源與纜線連接問題308列印問題309列印品質問題312影印問題319掃描問題320傳真問題321作業系統問題323規格328法規資訊339著作權3501.簡介這些是機器的主要元件：•主要優勢6•功能（依機型）8•好用資訊10•關於此使用者指南11•安全資訊12•機器總覽17•控制面板概覽20•開啟機器21•瞭解 LED22•顯示螢幕與有用的按鈕25•瞭解快顯鍵盤29友善的環境介面•此機器支援「環保」功能以節省碳粉和紙張（請參閱第 88 頁上的「環保標籤」）。
三星I5508的使用技巧
三星手机GT-I5508_使用手册，下载页面：/f/20464562.html1.长按关机键，会有下列选项：◆移动网络——关了就不能上网。
◆静音模式——手机静音。
◆飞行模式——与拔掉SIM卡效果一样。
◆关机——这个不用说了。
2.安卓系统的主屏幕与列表窗口的图标设置通常安装的软件都会在列表窗口中出现，主窗口中是系统自带的图标。
◆将列表窗口的图标移至主窗口。
在主窗口中打开你要移动到的目标屏，再按下方的列表窗口切换图标，在列表窗口中找到你想要复制的图标，按住不放，持续1秒，手机会抖一下，按住的图标会转到主窗口的屏幕中，放开手就会附在主窗口中。
◆将主窗口中的图标移动位置。
按住你想移动的图标不放，待手机抖一下后，图标就可以移动。
◆将主窗口中的图标删除。
按住你想删除的图标不放，待手机抖一下后，图标就可以移动，同时屏幕的下方会有垃圾箱的图标，将图标移至下方的垃圾箱区域就能删除图标。
3.铃声设置在sd卡中的“My Documents”里新建文件夹“audio”，里面分别：创建notifications文件夹放置短信铃声；创建alarms文件夹放置闹铃铃声；创建ringtones文件夹放置来电铃声；创建ui文件夹放置系统提示音。
将mp3放到各自的文件夹中后，重启手机，一定要重启。
设置的时候进入“设置---声音---手机铃声”就会看到你想要的铃声了。
用手机自带的音乐播放器，也可以随意设置来电铃声。
打开播放器－歌曲－按住想要的歌－用作手机铃声，ＯＫ。
4.推荐使用软件◆办公软件：OfficeSuite是一款快捷稳定的文档管理软件。
它除了支持查MicrosoftWord(DOC,DOCX), Excel (XLS, XLSX),PowerPoint(PPT,PPTX,PPS, PPSX) 及Adobe PDF文件外，还支持很多特性，例如嵌入文件浏览、富文本格式、字数统计、文件密码保护、适应屏幕宽度、全屏模式等。
◆电子书阅读：Anyview手机阅读器1.0.3可以很轻松的使用手机阅读各种电子文档，支持TXT,UMD等常用电子书格式；简单支持epub，将会进一步完善；支持在线书库(不主动联网)；真实的翻页效果；支持阅读内容发布到微博。