东进光科胶DNR-L300-D1(21.8)(中文)_rev.0
Light Vision 清晰视界系列眼镜说明书
Light Vision ™11356-00000-10Clear AF Lens, Grey Frame,Dual LED LightsSolus ™ 1000S1101SGAFClear Scotchgard ™ AF Lens,Blue/Black Frame S1102SGAFGrey Scotchgard ™ AF Lens,Blue/Black Frame S1103SGAFAmber Scotchgard ™ AF Lens,Blue/Black Frame S1107SGAF Indoor/Outdoor Grey Scotchgard ™ AF LensBlue/Black Frame S1101SGAF-KTClear Scotchgard ™ AF Lens,Blue/Black Frame, Foam Gasket and StrapS1102SGAF-KTGrey Scotchgard ™ AF Lens,Blue/Black Frame, Foam Gasket and StrapS1107SGAF-KTIndoor/Outdoor Grey Scotchgard ™AF Lens, Blue/Black Frame, Foam Gasket and StrapS1201SGAFClear Scotchgard ™ AF Lens,Green/Black FrameS1202SGAFGrey Scotchgard ™ AF Lens,Green/Black FrameS1203SGAFAmber Scotchgard ™ AF Lens,Green/Black FrameS1207SGAF Indoor/Outdoor Grey Scotchgard ™ AF LensGreen/Black Frame S1201SGAF-KTClear Scotchgard ™ AF Lens,Green/Black Frame, Foam Gasket and StrapS1202SGAF-KTGrey Scotchgard ™ AF Lens,Green/Black Frame, Foam Gasket and Strap S1201SGAF-SKTClear Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasket and Strap (temples not included)S1202SGAF-SKTGrey Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasket and Strap (temples not included)S1207SGAF-SKTIndoor/Outdoor Grey Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasketand Strap (temples not included)Solus-foamSolus Accessories Foam GasketSolus-strapSolus Accessories StrapSmart Lens ™13407-00000-5Photochromic Lens, Black FramePREMIUM PROTECTIVE EYEWEARThese eye or face protection products help provide limited eye and face protection. Misuse or failure to follow warning and instruction may result in serious potential injury, including blindness or death. For proper use, selection, and applications against flying particles, optical radiation and/or splash, see supervisor, read User Instructions and warning on the package or call 3M PSD Technical Service in the USA at 1-800-243-4630. In Canada, call 1-800-267-4414.WARNING!3Personal Safety Division 3M CenterBuilding 235-2W-70St. Paul, MN 55144-1000For more information:In U.S.Technical Assistance 1-800-243-4630 Customer Care Center 1-800-328-1667/WorkerSafety In CanadaTechnical Assistance 1-800-267-4414 Customer Care 1-800-364-35773M.ca/Safety3M PSD products are occupational use only.3M and all other trademarks used herein are trademarks of 3M Company, used under license in Canada. Please recycle. Printed in U.S.A. © 3M 2018. All rights reserved. 70-0715-6919-1Rev. 01/201811476-00000-10Clear AF Lens, Grey Frame,Dual LED LightsLight Vision ™ 2Fuel ™11640-00000-10Red Mirror Lens, Metallic Sand Frame11641-00000-20Blue Mirror Lens, Silver Frame11664-00000-10Blue HC Mirror Lens, White Frame11650-0000-10Red Mirror Lens, Metallic Sand Frame11654-00000-10Grey AF Lens, Black Rubberized FrameSecureFit ™ 600Safety SunwearSS1330AS-GYellow Mirror AS Lens, Grey FrameSS1428AS-SBlue Mirror AS Lens, Silver Alum FrameSS1502AF-BGrey AF Lens, Black Frame w/GasketSS1502AF-WGrey AF Lens, White Frame w/GasketSS1514AS-SSilver Mirror AS Lens, Silver Black Frame w/GasketSS1511AF-BGrey Polarize AF Lens, Black Frame w/GasketSS1514AS-BSilver Mirror AS Lens, Black/Grey Frame w/GasketSS1629AS-BRed Mirror AS Lens, Black FrameSF601SGAFClear Scotchgard ™ AF LensSF601SGAF-FMClear Scotchgard ™ AF Lens, Foam GasketSF602SGAFGrey Scotchgard ™ AF LensSF602SGAF-FMGrey Scotchgard ™ AF Lens, Foam GasketSF603SGAFAmber Scotchgard ™ AF LensSF607SGAFIndoor/Outdoor Grey Scotchgard ™ AF LensSF601RASClear Rugged Anti-Scratch LensSF602RASGrey Rugged Anti-Scratch LensSF617ASLow IR R1.7, AS LensSF630ASShade W3.0, AS LensSF650AS W5, AS Lens SF611ASPolarized, AS LensSF613ASPhotochromic, AS LensLight Vision ™ OTG11489-00000-10Clear AF Lens, Dual LED Lights, OTG16617-00000-10Clear Lens, Black Frame w/Strap, Medium16618-00000-10Clear Lens, Black Frame w/Strap, LargeLexa ™Dust GoggleGear™Lexa ™ Splash GoggleGear ™16644-00000-10 Clear Lens, Medium, D3 D416645-00000-10 Clear Lens, Large, D3 D416400-00000-10Clear Lens, Elastic Strap, Medium16408-00000-10Clear Lens, Black Adjustable Temple,Medium16412-00000-10Clear Lens, Elastic Strap, Large16420-00000-10Clear Lens, Black Adjustable Temple,LargeFectoggles ™40300-00000-10Clear Lens, Impact Goggle40301-00000-10Clear AF Lens, Impact Goggle40304-00000-10Clear Lens, Splash Goggle, D3 D440305-00000-10Clear AF Lens, Splash Goggle, D3 D4Centurion ™Maxim ™ 2x2 Goggle40686-00000-10Clear Lens, Black Frame w/Strap, Temples40687-00000-10Grey Lens, Black Frame w/Strap, Temples40696-00000-10Clear Lens, Black Frame, Side Venting40698-00000Clear AF Lens, Black Strap, Air Flow Goggle40699-00000Grey AF Lens, Black Strap, Air Flow Goggle332 Impact Goggle40650-00000-10Clear Lens 40651-00000-10 Clear AF Lens334 Splash Goggle40660-00000-10 Clear Lens, D3 D440661-00000-10 Clear AF Lens, D3 D4GoggleGear ™ 500GG501SGAFClear Scotchgard ™ AF Lens, D3 D4,Cloth Strap GG501NSGAFClear Scotchgard ™ AF Lens, D3 D4,Neoprene Strap GG500-PI Prescription InsertGG500-NeoStrapReplacementNeoprene Strap GG500-ClthStrap Replacement Cloth StrapSAFETY GOGGLESACCESSORIESMaxim ™ Splash GoggleModul-R ™40671-00000-10Clear AF Lens, O-T-G, D3 D440658-00000-10Clear AF Lens, Chin ProtectorThe Complete Line of Protective Eyewear Products11215-00000-20 Grey AF Lens, Black Frame11216-00000-20I/O Mirror Lens, Black FrameMoon Dawg ™11532-10000-20Clear AF Lens, Blue Frame11554-00000-20Clear AF Lens, Bronze Frame11555-00000-20Bronze AF Lens, Bronze Frame11556-00000-20Blue Mirror HC Lens, Bronze FrameMetaliks ™ GTHIE6 Protective EyewearAttaches directly to 3M ™ Hard Hat SuspensionHIE601AF - Clear AF Lens HIE602AF - Amber AF Lens HIE603AF - Grey AF Lens3M ™ Protective Eyewear Slip-On Side Shields23451-00030-20 ClearReplacement Foam GasketSF-FOAM (SF400)SF600FI (SF600)GoggleGear ™ 2890 SeriesGG2891-SGAFClear Scotchgard ™ AF Lens,Indirect Vent3M ™ Lens Cleaner83803-00000Lens Cleaning Fluid 83745-00000Lens Cleaning T owelettesQX Privo 12261-00000-20Clear AF Lens, Black/Orange Frame12262-00000-20Grey AF Lens, Black/Orange Frame12263-00000-20Amber AF Lens, Black/Orange Frame12264-00000-20I/O Mirror Lens, Black/Orange Frame12265-00000-20Clear AF Lens, Silver/Red Frame12266-00000-20SF401SGAF-REDClear Scotchgard Anti-Fog LensRed/Gray Frame SF401SGAF-BLUClear Scotchgard Anti-Fog LensBlue/Gray Frame SF401SGAF-BLU-FClear Scotchgard Anti-Fog Lens with FoamGasket, Blue/Gray Frame SF402SGAF-BLU12100-10000-20 Clear Lens, Black Temple12101-10000-20Grey Lens, Black Temple 12109-10000-20Clear Lens, Black Temple, Soft Nose12110-10000-20Grey Lens, Black Temple, Soft Nose12115-10000-20Clear Lens, Black Sport Grip Temple, Soft Nose12180-10000-2011380-00000-20 Clear AF Lens, Silver Frame11381-00000-20Grey AF Lens, Silver Frame11471-00000-20Clear AF Lens, Blue Frame11472-00000-20I/O Mirror Lens, Blue Frame11523-00000-20Light Blue AF Lens, Blue Frame11477-00000-10Clear AF Lens, Grey Frame, +1.5 Diopter11478-00000-10Clear AF Lens, Grey Frame, +2.0 Diopter11479-00000-10Clear AF Lens, Grey Frame, +2.5 Diopter11374-00000-20Clear Lens, Silver Frame, +1.5 Diopter11375-00000-20Clear Lens, Silver Frame, +2.0 Diopter11376-00000-20Clear Lens, Silver Frame, +2.5 Diopter11377-00000-20Grey Lens, Silver Frame, +1.5 Diopter11378-00000-2011457-00000-10Clear AF Lens, Silver Frame, Dual +1.5 Diopter11458-00000-10Clear AF Lens, Silver Frame, Dual +2.0 Diopter11459-00000-10Clear AF Lens, Silver Frame, Dual +2.5 DiopterBX ReadersMetaliks Sport11343-10000-20Clear AF Lens, Brushed Nickel Frame11344-10000-20Grey AF Lens, Brushed Nickel Frame11345-10000-20I/O Mirror HC Lens, Brushed Nickel Frame11540-10000-20Blue Mirror HC Lens, Brushed Nickel FrameLexa ™15100-00000-20Clear AF Lens, Black Temple, Large15200-00000-20Clear AF Lens, Black Temple, Medium15154-00000-100Clear AF Lens, Black Temple, Large15204-00000-20Grey AF Lens, Black Temple, Medium15152-00000-100Clear AF Lens, Black Temple, Medium14246-00000-20Clear AF Lens, Metallic Grey/Black Frame14247-00000-20Grey AF Lens, Metallic Grey/Black Frame14248-00000-20 I/O Mirror Lens, Metallic Grey/Black FrameSF401AF Clear AF Lens SF402AF Grey AF Lens SF410ASIndoor/Outdoor Mirror LensSF401AF-FM Clear AF Lens, Foam SF402AF-FM Grey AF Lens, Foam SF410AS-FMSecureFit 400OX。
日立DRX300(DLP)短焦写标参数 -
写标参数
1.单片式0.55″DLP芯片，6色轮极致色彩技术.
2.亮度≥3000流明亮度（ISO21118标准）、
3.对比度：≥2000:1
4.均匀度≥90%均匀度.
5.分辨率：1024×768，支持1600×1200
6.★投影灯泡：≤ 210WUHP , 寿命： 4000小时(标准)，带防爆吸附膜
7.支持 3D Ready功能：主动式3D功能可进行多种3D方案设计，
8.★接口丰富:具备1路HDMI/ 2路VGA / RS232/ USB/S端子/RCA/ 色差分量
Y,Cb/Pb,Cr/Pr×1接口
9.投影距离:1米内可投80寸的电子白板(有效画面)
10.★功能：“防尘墙”技术：全密封光机；可以用遥控器暂时关闭投影画面和声音,
冻结投影画面如电影画面,并且可以快捷恢复，支持包括480P、720P和1080I/P高清数字电视信号，3D色彩调整 .
11.★智能省电模式：可将此模式设定1-30分钟，设置时间内投影画面无变化，将自动
激活节电模式，灯泡会自动降低灯泡亮度，还可根据输入的电平自动调整灯泡亮度，延长灯泡寿命。
12.3C认证、节能（提供最新一期节能清单）、环保认证、质量管理体系认证证书
（ISO9001）、环境管理体系认证证书（ISO14001），提供国家级部门检测报告及厂家技术参数响应表（加盖厂家公章作为验收依据）
13.投标时提供由厂家印制的彩页介绍（非代理商）以及由厂家出具的授权投标函；供
货时提供厂家供货确认函、售后服务承函
1.★世界知名品牌，投标品牌连续4年（10年、11年、12年、13年）中国区销量
排名前三（以数据证明为准，加盖厂家公章）。
FANUC FX-300 系列数字光纤传感器说明书
MARKERSPLCHUMAN MACHINEINTERFACESENERGYMANAGEMENTSOLUTIONSFA COMPONENTSMACHINE VISIONSYSTEMSUV CURINGSYSTEMSFX-311FX-301-F7/FX-301-FFX-11AFX2FX-CH2FX-CHFX-301FX-301-HS FX-305Large display 9999 FX-305Large display with 4 digits (9999). With a greater difference indigit value than previous models, threshold values can be setin units of 1 digit up to maximum 9999.Threshold setting can now be done more easily and accurately.(During STDF, LONG and U-LG modes)2.5 timespreviousmodels!* Cover opened state is shown.If the light receiving level becomes saturated during close-rangesensing or when sensing transparent or minute objects, youcan adjust the light emitting amount of the sensor to stabilizesensing without needing to change the response time. Sensingthat previously required the response time or fibers to bechanged can now be set much more easily using this function.Light-emitting amount selectionFX-301FX-301-HS FX-305In addition to a “four-chemical emitting element” which suppresseschanges in the light emitting element over time so that a stablelevel of light emission can be maintained over long periods, a“APC (Auto Power Control) circuit” has also been adopted afresh.The light emitting amount can be controlled in minute degreesso that even changes occurring over very short periods can behandled, allowing stable sensing performance by suppressingdeviations in light emitting amounts caused by changes in theambient environment that could not previously be suppressed.Stable sensing over long and short periodsDeviationLightemittingamountEven beginners can quickly learnhow to use the MODE NAVI All modelsMODE NAVI uses six indicators to display the amplifier’sbasic operations. The current operating mode can beconfirmed at a glance, so even a first time user caneasily operate the amplifier without becoming confused.Easy confirming of threshold value settingsFX-301FX-301-HS FX-305The threshold valuecan be confirmed byturning the jog switcheven during RUNmode.Jog switch is turnedRight: Output 2 forFX-305The thresholdLeft: FX-301(-HS)Output 1 for FX-305Digital Fiber SensorFX-300 SERIES150LASER SENSORS PHOTO-ELECTRIC SENSORS MICRO PHOTO-ELECTRIC SENSORS AREA SENSORSSAFETY LIGHT CURTAINS /SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASURE-MENT SENSORS STATIC CONTROL DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACESENERGY MANAGEMENT SOLUTIONS FACOMPONENTSMACHINE VISION SYSTEMS UVCURINGSYSTEMSFX-311FX-301-F7/FX-301-F FX-11A FX2FX-CH2FX-CH056 222 38 18*********************SEN TRONIC AG151Digital Fiber Sensor FX-300SERIESLASERSENSORSPHOTO-ELECTRICSENSORSMICROPHOTO-ELECTRICSENSORSAREASENSORSSAFETY LIGHTCURTAINS /SAFETYCOMPONENTSPRESSURE /FLOWSENSORSINDUCTIVEPROXIMITYSENSORSPARTICULARUSESENSORSSENSOROPTIONSSIMPLEWIRE-SAVINGUNITSWIRE-SAVINGSYSTEMSMEASURE-MENTSENSORSSTATICCONTROLDEVICESLASERMARKERSPLCHUMANMACHINEINTERFACESENERGYMANAGEMENTSOLUTIONSFACOMPONENTSMACHINEVISIONSYSTEMSUVCURINGSYSTEMSFX-311FX-301-F7/FX-301-FFX-11AFX2FX-CH2FX-CHQuick-connection cablesFor FX-305(P)End platesAmplifier mounting bracketFiber amplifier protection seal• FX-MB1056 222 38 18*********************SEN TRONICAGDigital Fiber SensorFX-300 SERIES152LASER SENSORS PHOTO-ELECTRIC SENSORSMICRO PHOTO-ELECTRIC SENSORS AREA SENSORSSAFETY LIGHT CURTAINS /SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASURE-MENT SENSORS STATIC CONTROL DEVICESLASERMARKERS PLCHUMAN MACHINE INTERFACES ENERGY MANAGEMENT SOLUTIONSFACOMPONENTS MACHINE VISION SYSTEMS UVCURINGSYSTEMSFX-311FX-301-F7/FX-301-F FX-11A FX2FX-CH2FX-CHNotes: 1) FX-305□: Output 1 operation indicator (Orange)2) FX-305□: Output 2 operation indicator (Orange)3) FX-301□: 3-pin, FX-305□: 4-pinNotes: 1) CN-74-C □ only2) CN-73-C □: 3-core Amplifier mounting bracket (Optional)MS-DIN-2Material:C old rolled carbon steel (SPCC) (Uni-chrome plated)2) CN-71-C □: 1-coreEnd plate (Optional)MS-DIN-E2.75Material: Polycarbonate056 222 38 18*********************SEN TRONIC AG。
XSP-12C(L3001)落射荧光显微镜适用于荧光显微术和透射.
名称
类别/技术参数
目镜
大视野WF16X(Φ11mm)
分划10X(Φ20mm),格值0.1mm/格
物镜
无限远平场消色差20X/0.40
目镜筒
双目镜(倾斜30˚)
转换器
五孔(内向式滚珠内定位)
滤色片
绿滤色片
黄滤色片
相衬装置
目镜
对中望远镜
物镜
无限远相衬平场消色差10X/0.25 PHP
无限远相衬平场消色差20X/0.40 PHP
无限远相衬平场消色差40X/0.65 PHP(弹簧)
无限远相衬平场消色差100X/1.25 PHP(弹簧,油)
转盘式相衬聚光镜(PH-Ⅰ)
转盘式相衬聚光镜(PH-Ⅱ)
插板式相衬聚光镜
拉板式相衬聚光镜
CCD接头
0.4X
0.5X
1X
0.5X带分划尺,格值0.1mm/格
摄像仪
带USB和Video输出
带USB输出
XSP-12C(L3001)落射荧光显微镜适用于荧光显微术和透射明视场观察.采用无限远平场消色差物镜和大视野目镜,光学系统成像清晰,视野广阔,
是生物学、细胞学、肿瘤学、遗传学、免疫学等研究工作的理想仪器，可供科研、高校、医疗和防疫等部门使用。
性能特点
▲配大视野目镜和无限远平场消色差物镜，视场大而且清晰
滤色片
蓝滤色片
磨沙玻璃
集光器卤素灯适用源自光源6V 20W卤素灯,亮度可调
落射器荧光装置
汞灯灯箱100W/DC
电源箱:交流电:110V或220V
荧光滤光片组B激发光波段:420~485nm
荧光滤光片组G激发光波段:460~550nm
荧光滤光片组UV激发光波段330~400nm
安全光幕MS4800
DeviceNet安全系統 型錄編號：Z907-TW5-01
安全雷射掃描器
安全踏墊/安全踏墊控制器
型錄編號：SCHG-024A-TW5-01 型錄編號：F087-TW5-01
G9SX-SM/LM 停止監控模組 型錄編號：SGFM-038A-TW-01
/&8
安全光柵
MS4800系列
基本型系列 MS/MSF4800B
φ30mm φ40mm
20mm 30mm
280～2120mm 360～2040mm
無需使用控制器，最多即可串接4台
(最多可支援共256個光軸) (僅限MSF4800) 無需連接控制器，最多即可串接4台(最多可支援256個光軸)，因此可減少工時。此外，還
能夠與不同MOS (最小檢測物體)的機型互相連接，因此可靈活因應所有的應用。
輔助輸出(PNP電晶體x 1或是NPN電晶體x 1)
○ ＊1
利用MS4800-RM6的暫時無效化模組進行的暫時無效化功能
浮動無效化(Floating Blanking) 固定無效化(Fixed Blanking) 監控無效化功能 降低解析度之清除功能 檢測距離設定 啟動輸入方式 反應時間調節
＊1. 使用可程式診斷模組(PDM)即可進行設定。 ＊2. 使用可程式診斷模組(PDM)或是配線連接方式，即可進行設定。
○ ＊1 (僅MSF4800A)
○ ＊1 ○ ＊1 ○ ＊1 ○ ＊1 ○ ＊1 ○ ＊1 ○ ＊1
MS4800系列
(交貨日期請向經銷商洽詢。)
औѴጣ 型式
串聯專用 (暫時無效化專用*1) 主機 MSF4800A-30-□ 子機*2 MSF4800-30-□-XR2 主機 MSF4800A-40-□ 子機*2 MSF4800-40-□-XR2 主機 MSF4800B-30-□ 子機*2 MSF4800-30-□-XR2 主機 MSF4800B-40-□ 子機*2 MSF4800-40-□-XR2
Q3-6611
溶剂暴露 在本资料表中所讨论的硅酮粘合剂仅可抵受在作业 过程中发生的液体、溶剂或燃料的溅洒或间隔性的 暴露，这些粘合剂不适宜连续性的溶剂或燃料暴 露，应预先进行测试，以确定粘合剂在特定环境下 的作业性能。
尽管我们的追踪记录不是千年之久，但我们生产用 于电子产品的粘合剂几乎是从电子产品问世就开始 的，许多道康宁公司的产品已被持续使用30年或更 久，并且至今依旧适用，证明了硅酮粘合剂用于电 子产品的合适性。硅酮长期以来一直被作为耐用的 介电绝缘体，可以起到抵御环境中污染物的屏障作 用，以及对冲击和振动所产生应力的吸收作用，并 可在广泛的温度、湿度及其恶劣环境条件下保持其 物理特性和电学特性。
快速表干时间；无腐蚀性；精炼型
EL, LCD 模块组装
快速表干时间；无腐蚀性；耐热温度达275°C
密封护套式加热管尾端
快速表干时间；无腐蚀性；精炼型
密封电子仪器设备和模块；固定电路板零件
快速表干时间；无腐蚀性；精炼型
电路板零件修复；LCD模块组装
快速表干时间；无腐蚀性；精炼型，UL 94HB (仅黑色) LCD模块组装；LED模块组装；灌封
设备推荐 通过很多年提供用于电子产品的保护材料，道康宁 已经与世界上主要设备供应商结成了强大的联盟。 我们刚刚与其他九个一流公司联合发起了“外部设 备供应商联盟”。通过这些合作，既节约时间又节 省费用，保证材料和工艺的最优化的整合。
咨询技术专家 请我们的专家参观您的生产设施，或者加入我们的 全球应用中心，来一起研究您的材料和工艺的需 求。我们也可以为您的员工提供研讨会和培训，使 他们更有知识地工作。利用道康宁提供的材料、工 艺、设备整合解决方案，您可以在更少的时间内生 产出更多的模具和组件，成本更低，停工次数更 少，客户拒收货物更少。
胶体说明书总表all1
电话：(010) 51657899传真：(010) 64787060邮编：100102北京市朝阳区花家地西里金隅国际G座3A03单元, Email: xf-lin@Norland 光学胶总览表型号Recommend for: 推荐用于固化方式玻璃对金属的粘性塑料颜色典型特性25度时的粘度折射率模量PSI拉力PSI拉断比硬度shore DNOA60General purpose adhesive forbonding doublets, prisms ormounting components. 通用胶：用于粘合成对物、棱镜或架装元器件。
UV 好好一般透明300 CPS 1.56 135,000 2,800 35% 8NOA61Preferred adhesive for militaryoptics. Meets MIL-A-3920. Usedfor optics exposed to temperatureextremes. Low shrinkage. 军用光学首选胶，收缩低，用在暴露于极端温度的光学系统，符合MIl-A-3920标准。
UV 极好极好一般透明300 CPS 1.56 150,000 3,000 38% 8NOA63Cures well in thick sections. Useas a fillet bond to hold lenses inplace or for bonding where lowfluorescence or good transmissionin UV range is required. 厚断面尤佳，用于带状结合使透镜就位，或要求在UV范围低荧光及高传输性。
UV 好好一般透明2,500 CPS 1.56 240,000 5,000 6% 9NOA65Flexible adhesive suitable for lowstrain applications or for coldblocking of lenses. 柔性胶：适用于低张力应用，或透镜冷加工UV 好好一般透明1,000 CPS 1.52 20,000 1,500 80% 5NOA68Flexible adhesive for glass orplastics such as polycarbonateCAB or acrylic. 柔性胶：用于玻璃或塑料，如：多碳酸盐CAB或丙烯酸UV 极好好好到极好透明5,000 CPS 1.54 20,000 2,500 80% 6NOA71Provides a strong bond to glasssurfaces and has excellent clarityfor light guides and otherapplications. 对玻璃表面提供强力粘合，对光导及其它应用具有极好透光性UV 极好极好一般透明225 CPS 1.56 55,000 1,300 43% 8电话：(010) 51657899传真：(010) 64787060邮编：100102北京市朝阳区花家地西里金隅国际G 座3A03单元, Email: xf-lin@NOA72Lowviscosityadhesivefor bonding glass or plastics such as polycarbonate, CAB or acrylic. Cures with UV or visible light.低粘性胶：用于粘合玻璃或塑料，如：多碳酸盐CAB 或丙烯酸，UV 或可见光固化。
KNS球焊机SPEC
Field Upgradable Kit: 56mm(X) by 87mm(Y)
Field Upgradable Kit: 56mm(X) by 87mm(Y)
Field Upgradable Kit: 56mm(X) by 87mm(Y)
Field Upgradable Kit: 56mm(X) by 87mm(Y) ELA(Factory configured): 56mm(X) by
+/- 3.0um @ 3-sigma Variability of measured bonded ball: ± 2% at 3 sigma 56mm(X) by 80mm (Y)
Field Upgradable Kit: 56mm(X) by 87mm(Y)
Loop types Standard Loop, Low Loop, Worked Loop Premium Loop Profiles: Spider Loop, BGA2 Loop, JWire, Stitch Bonding, Stand-Off-Stitch, Gold Ball Bumping Standard, Standard worked, BGA2 Loop, BGA2 Worked Loop Premium Loop Profiles: BGA3 Low Loop, BGA4 CD Loop, J wire, Spider Loop, Security Bond, CSP Loop, CSPLL loop, SSB, bumping Standard, Standard worked, BGA2 Loop, BGA2 Worked Loop Premium Loop Profiles: BGA3 Low Loop, BGA4 CD Loop, J wire, Spider Loop, Security Bond, CSP Loop, CSPLL loop, SSB, bumping Standard, Standard worked, Flexible pitch indexing, CSP & Basic Premium Loop Profiles: J wire-II, Security Bond II, Spider Loop, CSPLL , SSB-2, SSB-3 , AccuBump, A loop, F2 loop, RF II Loop, 12K, FAB II & Lateral worked loop Standard, Standard worked, BGA2 Loop, BGA2 Worked Loop Premium Loop Profiles: BGA3 Low Loop, BGA4 CD Loop, J wire, Spider Loop, Security Bond, CSP Loop, CSPLL loop, SSB, bumping
Tamron 产品说明书
Model Imager Size Mount Type Focal Length Aperture Range
Field of View Angle (Horizontal × Vertical)
Focusing Range
Operation
Wave Length
1/2.7" 1/3"
Wide Tele Wide Tele
Backlight performance is substantially improved by employing Tamron’s proprietary multi-coating technology. Use of state-of-the-art simulation and validation of use conditions in various security scenes effectively reduces ghosting and are to the minimum.
Pursuit of Friendly User Utility and High Reliability
Compactness designed to t in a camera housing used in outdoor surveillance. Large focus rotation angle for easier focusing adjustment. Mount-slip mechanism to assist quick camera/lens integration in installation. Employment of highly-reliable automatic iris mechanics.
马扎克6800参数
F E D C B A 9876543210bit No.0111120 TOOLS MAGAZINE 160 TOOLS TOOL HIVE bit 80101MAX TOOL NUMBER 40 TOOLS MAGAZINE 80 TOOLS MAGAZINE 240 TOOLS TOOL HIVE 320 TOOLS TOOL HIVEbit A REGISTER R2100<NOTE2><NOTE1> R2100 bitF ALWAYS ON <NOTE>M1029 1: 0:M1028 1: 0:M1027 1: 0:M1026 FMS PRERARTION 1:VALID 0:INVALID M1025 SPINDLE SPEED 1: 0:10000rpm M1024 GEAR LESS 1:10000rpm 0:M1023 1: 0:M1022 1: 0:0M1020 COOLANT MENU AT POWER ON 1:VALID 0:INVALID M1019 1: 0:M1018 1: 0:M1017 TYPE OF PALLET CHENGER 2 1:6 PALLETS 0:1 PALLET bit No.COAD M1021 ONE CYCLE SW. OF PALLET CHANGE 1:VALID 0:INVALID bit 9COAD 01M1016 TYPE OF PALLET CHENGER 1 1:2 PALLETS 0:1 PALLET M1015 AXIS MOVE AT ATC BY PLC <NOTE1> 1:ONLY PROGRAM 0:BY PLC(STD.)M1014 NOT "M06T**T**" <NOTE3> 1: 0:M1013 SELECT THE T COAD "M06T**" 1: 0:M1012 AXIS MOVE AT ATC BY PLC(EIA/ISO) 1: 0: M1011 NG. MAGAZINE TOOL DETECTOR 1: 0:M1009 MAGAZINE MAX TOOL NUMBER <NOTE2> 1: 0:M1007 1: 0: M1006 TYPE OF FEEDBACK Z 1:ABSOLUTE 0:INCREMENTAL M1005 TYPE OF FEEDBACK Y 1:ABSOLUTE 0:INCREMENTAL M1004 TYPE OF FEEDBACK X 1:ABSOLUTE 0:INCREMENTAL M1003 ENDMILL FOR TOOL LENGTH MEASURE 1:VALID 0:INVALIDM1002 NC POSITIONING TABLE 1:VALID 0:INVALID M1001 1: 0:1M1000 TYPE OF TABLE 1:4 AXIS 0:MR-J21248124812481248R 2100000F E D C B A 98765432101248124812481248R 2101PLC SEQUENCE PARAMETER TABLEM1031 1: 0:M1030 XYZ AXES MOVE SIMULT.AT ATC 1:VALID 0:INVALID M1008 1: 0: M1010 1: 0: APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC BIT (1)06/11/2006/11/2006/11/20M1062 TOOL ID 1:AVAILABLE 0:DISAVAILABLE M1055 USA-SUPER FLOW HIGH PRE.COOLANT 1:VALID 0:INVALID M1049 SPINDLE THROUGH COOLANT 1:VALID 0:INVALID M1045 1: 0:M1042 TOOL TRANSPORT SYSTEM 1:VALID 0:INVALID M1039 INCH/METRIC CONVERSION 1:VALID 0:INVALID M1035 RESERVED(MG) 1:VALID 0:INVALID M1063 1: 0:M1061 WAIT CUTTING FEED TILL COOLANT ON1:AVAILABLE 0:DISAVAILABLE M1058 SPIRAL CONVEYOR CMD BY M CODE 1:VALID 0:INVALID M1057 SPINDLE CLEANING TOOL 1:VALID 0:INVALID M1056 TOOL CLEANER 1:VALID 0:INVALID M1052 NATIONAL HIGH PRE.COOLANT 1:VALID 0:INVALID M1054 1:3(STD) 0:1(NEW)M1051 KNOLL HIGH PRE.COOLANT 1:VALID 0:INVALID M1050 OIL HOLE COOLANT 1:VALID 0:INVALID bit No.COAD M1053 NEW NATIONAL HIGH PRE.COOLANT 1:VALID 0:INVALID COAD M1048 CONSEP2000(MAYFRAN) 1:VALID 0:INVALID M1046 PATO LIGHT ON AT M00/M01 1:VALID 0:INVALID M1047 WARM UP ACTION 1:VALID 0:INVALIDM1043 MAZATROL-FMS 1:VALID 0:INVALID M1044 PALLET I/D 1:VALID 0:INVALID M1041 D.N.C 1:VALID 0:INVALID M1040 PATO LIGHT ON AFTER PALLET CHANGE1:VALID 0:INVALID M1038 CYCLE START BEFORE ZERO RETURN 1:VALID 0:INVALID M1037 1: 0:M1036 RESERVED(PD) 1:VALID 0:INVALID M1034 RESERVED(MD) 1:VALID 0:INVALID M1033 1: 0:M1032 MAZAK MESURING SYSTEM 1:VALID 0:INVALID 1248124812481248R 2102F E D C B A 98765431F E D C B A 987654321012481248124812480bit No.2R 2103M1059 TECNOFORME HIGH PRE. COOLANT I/F 1:VALID 0:INVALIDM1060 1:SP. STOP 0:SP. NOT STOP APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC BIT (2)06/11/2006/11/2006/11/20F E D C B A 9876543210bit No.RESERVED(YME-C) 1:VALID 0:INVALID HDLC MODE 1:TAPE 0:MEMORY M5031 P/C HOOK COMMAND ARBITARY POSITION 1:CMD.POSITION 0:CMD.OFFSETM5030 1:VALID 0:INVALID M5029 1:VALID 0:INVALID M5028 PMC (FLAT FMS) 1:VALID 0:INVALID M5027 1: 0:M5026M5024M5023 NEGLECT NEXT TOOL AT MMS OR TBR 1:VALID 0:INVALID M5022 1: 0:M5011 FHD AT THERMAL OFFSET ALARM 1:INVALID 0:VALIDM5004 1: 0:M5016 RESUME SPINDLE RUN AFTER ATC(EIA/ISO) 1:VALID 0:INVALID M5013 MMS INTERFACE UNIT TYPE 1:OMI 0:MI12M5010 HIGH SPEED SPINDLE WARM UP 1:AVAILABLE 0:DISAVAILABLE M5007 1: 0:M5003 1: 0:M5020 RESUME SPINDLE RUN AFTER ATC(MAZATROL) 1:VALID 0:INVALID M5017 WAIT CUTTING FEED TILL SP. UP TO SPEED 1:VALID 0:INVALIDM5019 1:VALID 0:INVALID M5018 NEGLECT NEXT TOOL 1:AVAILABLE 0:DISAVAILABLE bit No.COAD M5021 TOOL ID ALARM CANCEL 1:VALID 0:INVALID COAD M5015 TOUCH PROBE TYPE 1:MP10 0:MP3M5009 COLLECT SP. LOAD FOR WARM UP 1:INVALID 0:VALIDM5008 MMS SKIP BUZZER 1:INVALID 0:VALID M5005 1: 0:M5006 1: 0:M5002 1: 0: M5001 1: 0:M5000 1: 0:1248124812481248R 2104F E D C B A 98765432101248124812481248R 2105M5025 1: 0:M5012 TTS RUNNING (NEGLECT ID) 1:AVAILABLE 0:DISAVAILABLE M5014 STATES OF M/C WHEN MMS LOW BAT. 1:ALARM DSP.ONLY 0:FEED HOLD STOP APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC BIT (3)06/11/2006/11/2006/11/20WAIT ATC AT SP.THROU AIR 1:VALID 0:INVALID HYDRAULIC JIG TYPE B (2) 1:VALID 0:INVALID JET PURSUE 1:VALID 0:INVALID HYDRAULIC JIG TYPE A 1:VALID 0:INVALID #1033 RESET AT M02/M30 1:INVALID 0:VALID INCH/METRIC CONVERSION 1:VALID 0:INVALID PNo.-->#1033 (PALLET ID) 1:VALID 0:INVALID TABELE PALLET CHANGR POSSIOTION 1:180DEG(OP.) 0:0DEG NC POSITIONING TABLE COMMAND 1:1DEG=B1 0:1DEG=B1000 NEXT INSTRUCTION 1-CYCLE INVAL. 1:VALID 0:INVALID SPINDLE MONITOR(YME-C) 1:VALID 0:INVALID CHIP BLASTER/OGURA HIGH PRS.COOLANT 1:VALID 0:INVARID X&Y AXES MOVE WITH INDEX TABLE 1:VALID 0:INVALID OIL HOLE & SP.THROUGH COOLANT 1: 0:6PC No.CONF.SENSOR 1:VALID 0:INVALID THE SECOND COOLANT FILTER 1:VALID 0:INVALID M5062M5061M5060M5059M5058M5057M5056M5055M5054M5053M5052M5051 M5050M5049M5048M5047 ADDITIONAL M CODE 1:VALID 0:INVALIDM5038 WAY LUBE FLOWT SWITCH TYPE 1:LOW-ON 0:LOW-OFF M5037 THROUGH COOLANT INHIBIT AT SP ON 1:INVALID 0:VALID M5035 COIL CHANGE LOW BY ORIENT 1:INVALID 0:VALIDM5034 NEW PMC(MASTER MACHINE) 1:VALID 0:INVALID M5033M5032M5063 MR-J2 SET MENU 1:VALID 0:INVARIDbit No.COAD COAD 1248124812481248R 2106F E D C B A 98765431F E D C B A 987654321012481248124812480bit No.2R 2107PLC SEQUENCE PARAMETER TABLEM5039 OIL AIR FLOWT SWITCH TYPE 1:LOW-ON 0:LOW-OFF M5040 GEAR 4 1:VALID 0:INVALID M5041 OIL AIR PRESS SWITC TYPE 1:N.C. 0:N.O.M5042 LARGE DIA.BORING BAR 1:VALID 0:INVALID M5043 LUBERICATION PRESSURE SWITCH TYPE 1:N.C. 0:N.O.M5044 P/C HOOK CMD.ARBITARTY POSSITION 1:360 POS. 0:360000 POS.M5045 CYCLE FIN.BUZZER 1:VALID 0:INVALID M5046 PHS 1:VALID 0:INVALID PRESSURE SW. FOR THROUGH COOLANT 1:VALID 0:INVALID M5036 MACHINE ADJUSTMENT JIG 1:VALID 0:INVALID APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC BIT (4)06/11/2006/11/2006/11/20F E D C B A 9876543210bit No.M5079 CENTRALIZED COOLANT AND PALLET AIR BLAST 1:(Mercury) 0:INVALIDM5070 STOPS THE DOOR BY 6P/C DOOR OPENING 1:VALID 0:INVALID M5069 HANDLE BOX SP.JOG SW. 1:INVALID 0:VALID M5068 1: 0:M5092 HSK TOOL 1:VALID 0:INVALID M5091 1: 0: M5090 FMS DOOR ONE TOUCH OPEN 1:VALID 0:INVALID M5085 P/C START AT 1 CYCLE STOP 1:1 CYCLE SW. 0:1 CYCLE+CST SW.M5082 NC ROTARY TABLE SERVO OFF AT CLAMP 1:NOT SERVO OFF 0:SERVO OFF M5083 CHIP CONVEYER SLIP ALARM 1:VALID 0:INVALID M5078 1CYC.WILL NOT BE VALIDATE IF FIXTURE IS CLAMP 1:VALID 0:INVALID M5077 TOOL HIVE 1:VALID 0:INVALID M5076 COOLANT FILTER 1:VALID 0:INVALID M5075 WARM UP 1:VALID 0:INVALID M5074 1: 0:M5073 COOLANT STOP ALARM 1:VALID 0:INVALID M5072 1: 0:M5067 HYDRAULIC JIG TYPE B (1) 1:VALID 0:INVALID M5065 MMS ALARM 1:VALID 0:INVALID M5088 NEXT PALLET SELECT 1:VALID 0:INVALID M5094 HEIDENHAIN SCARE 1:VALID 0:INVALID M5089 1: 0:M5084 ALL AXIS ZERO RETURN AT WORM UP 1:INVALID 0:VALIDM5081 TOOL ID WRITABLE ONLY WHEN MAG.MNL.INTRR 1:VALID 0:INVALID bit No.COAD M5086 1: 0:COAD M5093 AUTO WARM UP 1:VALID 0:INVALID M5095 CYCLE START ACTIVET 1:ANY SCREEN 0:ONLY SPECM5080 TABLE AUTO ZERO RETURN AT PALLET CHANGE 1:INVALID 0:VALID M5066 COIL CHANGE MANUAL 1:VALID 0:INVALID 1248124812481248R 2108M5087 CUNV. ENABLE 1:INVALID 0:VALID F E D C B A 98765432101248124812481248R 2109M5064 PALLET SHELTER AFTER PALLET IS UNLOAD 1:VALID 0:INVALID M5071 1: 0:APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC BIT (5)06/11/2006/11/2006/11/20F E D C B A 9876543210bit No.bit No.COAD COAD M4058 1:VALID 0:INVALID 1248124812481248R 2143F E D C B A 98765432101248124812481248R 2144M4042 1:VALID 0:INVALID M4043 1:VALID 0:INVALID M4044 1:VALID 0:INVALID M4045 1:VALID 0:INVALID M4046 1:VALID 0:INVALID M4047 1:VALID 0:INVALID M4048 1:VALID 0:INVALID M4049 1:VALID 0:INVALID M4050 1:VALID 0:INVALID M4051 1:VALID 0:INVALID M4052 1:VALID 0:INVALID M4053 1:VALID 0:INVALID M4054 1:VALID 0:INVALID M4055 1:VALID 0:INVALID M4056 1:VALID 0:INVALID M4057 1:VALID 0:INVALIDM4059 1:VALID 0:INVALID M4060 1:VALID 0:INVALID M4061 1:VALID 0:INVALID M4062 1:VALID 0:INVALID M4063 1:VALID 0:INVALID M4064 1:VALID 0:INVALID M4065 1:VALID 0:INVALID M4066 1:VALID 0:INVALID M4067 1:VALID 0:INVALID M4068 1:VALID 0:INVALID M4069 1:VALID 0:INVALID M4070 1:VALID 0:INVALID M4071 1:VALID 0:INVALID M4072 1:VALID 0:INVALID M4073 1:VALID 0:INVALIDAPR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC BIT (6)06/11/2006/11/2006/11/20F E D C B A 9876543210bit No.bit No.COAD COAD 1: 0:1248124812481248R 2148F E D C B A 98765432101248124812481248M4074 1:VALID 0:INVALID M4075 1:VALID 0:INVALID M4076 1:VALID 0:INVALID M4077 1:INVALID 0:VALID M4078 1:VALID 0:INVALID M4079 1:INVALID 0:VALID M4080 1:INVALID 0:VALID M4081 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0:1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0:APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC BIT (7)06/11/2006/11/2006/11/20F E D C B A 9876543210bit No.COAD 1248124812481248R 22771:VALID 0:INVALID 1:MEMORY&MDI 0:MEMORY 1:RESET&1CYCLE0:1CYCLE SW.1:CLEAR&1CYCLE0:1CYCLE SW.1:VALID 0:INVALID 1:VALID 0:INVALID 1:HIGH/LOW 0:HIGH 1:VALID 0:INVALID 1:VALID 0:INVALID 1:VALID 0:INVALID 1:VALID 0:INVALID 1:VALID 0:INVALID 1:VALID 0:INVALID 1:VALID 0:INVALID 1:VALID 0:INVALIDPALLET CHANGE FIN.YELLOW PATO LIGHTPALLET CHANGE FIN.YELLOW PATO LIGHT ON 1PALLET CHANGE FIN.YELLOW PATO LIGHT ON 2PALLET CHANGE FIN.YELLOW PATO LIGHT OFF 1PALLET CHANGE FIN.YELLOW PATO LIGHT OFF 2PALLET CHANGE FIN.YELLOW PATO LIGHT REMEMBER(P.OFF)M4032M4033M4034M4035M4036M4037M4038M4039M4040M4041F E D C B A 9876543210bit No.COAD 12481248124812481: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0:1:MEMORY&MNL 0:MEMORYAPR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC BIT (8)06/11/2006/11/2006/11/20F E D C B A 9876543210bit No.COAD 1248124812481248R 22801: 0:FOR OPTION 1: 0:FOR OPTION 1: 0:FOR OPTION 1: 0:FOR OPTION 1:VALID 0:INVALID1:VALID 0:INVALID JET GUN1:VALID 0:INVALID 2PC SAFETY DOOR1:VALID 0:INVALID RTN.PREVIOUS RAPID OVERRIDE WHEN MC DOOR CLOSE 1:VALID 0:INVALID EUCHNER TOOL ID 1:VALID 0:INVALID RESERVED (MDN)1:VALID 0:INVALID BALLUFF TOOL ID 1:NEAREST 0:CW1:NEAREST 0:COMMANDED 1:VALID 0:INVALID1:VALID 0:INVALID ADDITONAL AXIS 1:VALID 0:INVALIDD'ANDREA TOOL M4000M4001M4002M4003M4004M4005M4006M4007M4008M4009M4010M4011M4012M4013M4014M4015F E D C B A 9876543210bit No.COAD 1248124812481248R 22811:NO ALARM 0:MC STOP PROCESS FOR MC.OUTSIDE TBR.DET.M56,M55/EIA 1:VALID 0:INVALID OUTSIDE MACHINE TOOL BREAKAGE DETECTION 1:BUILT-IN 0:EUCHNER TOOL ID ID AMP.TYPE 1:VALID 0:INVALID1:VALID 0:INVALIDROBOT INTERFACE (USA-STD)1:AUTO 0:CYCLE START1:VALID 0:INVALID ROBOT INTERFACE(SILMECA/ACMS SPEC.)1:VALID 0:INVALID TROUGH COOLANT FLOOD/MIST SWITCH 1:VALID 0:INVALID EXTERNAL BLOCK SKIP1:BEFORE 0:ALL OFF SELECTION FOR BLOCK SKIP AT POWER ON 1:VALID 0:INVALID FLOOD COOLANT FLOW DETECTION 1:VALID 0:INVALID WARK GAP DETECTION 1:VALID 0:INVALID LONG TOOL INTERLOCK 1:VALID 0:INVALID HYDRAULIC FIXTURE A+B1:VALID 0:INVALID 1CYCLE SW. FOR BOTH HANDS(NEMAK)1:VALID 0:INVALIDPALLET DOOR AUTO OPEN AFTER PALLET CHANGE M4016M4017M4018M4019M4020M4021M4022M4023M4024M4025M4026M4027M4028M4029M4030M4031APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC BIT (9)06/11/2006/11/2006/11/20rpm ±%SPINDLE UP TO SPEED PERCENTAGErpm SPINDLE MOTOR COILING CHANGE SPEED HYSTERISYS LOW GEAR SPINDLE MOTOR COILING CHANGE SPEED LOW GEAR98 7 6 5 4 3 2 1R 2140 9 8 7 6 5 4 3 2 1PLC SW. & ALARM DISPLAY (LANGUAGE CODE)TOOL ID READ RETRY NUMBER (IF 0 THEN 3 TIMERS)TOOL ID MAGAZINE POCKET PARAMETERR 2130 9 8 7 6 5 4 3 2 1WARM UP WORK No.1～9999MULTIPLICATI0N OF M,P,G INTERRUPTION4 8 9rpmSPINDLE SPEED AT CLEANING TOOL ONR 2120SJOG VALLUE (SPINDLE JOG SPEED R,P,M) 6 5 3rpm 7%%R2 VALUE (RAPID TRAVERSE SPEED %)R 2130 0:ENG 1:JPNSPINDLE CLEANING TOOL No.% 2 2:*100 1:* 10R 2116 0:* 1<NOTE>R 2110 C O M M E N T ADDRESS R0 VALUE (RAPID TRAVERSE SPEED %)PLC DATA (SHORT TYPE) PARAMETERR1 VALUE (RAPID TRAVERSE SPEED %) 1 5 (NCTABLE:3)25 50 220500 52000 201510000rpmSPINDLE TYPESPINDLE SPEED AT JOGPALLET ID DELAY TIMER(PALLET ID OPTION ONLY)SCANSPINDLE LOAD LIMIT ALARM 1SPINDLE LOAD LIMIT ALARM 2SPINDLE LOAD CHANGE RATE 1SPINDLE LOAD CHANGE RATE 2SETTING UNIT3 (NCTABLE:2)PLC PARAMETERPLC PARAMETER PLC PARAMETERPLC PARAMETER APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC DATA (1)06/11/2006/11/2006/11/2050.01S MG.SHIFTER OFF TIMER3101800 6003002000150 10 5 18003600600700 150 D199D198D197D196D195D194D193D192D191D190D189D188D187D186D185D184D183D182D181D180D179D178D177D176D175D174D173D172D171D170 98 7 6 5 4 30.01S20.1S 10.1S OIL AIR TIMER 3(PUMP ON DELAY)R 2190 JE FILTER LEVEL LOW ALARM TIMER SPINDLE LOAD READING DELAY TIME AT SPINDLE CHANGE SPEED ALARM DISREGARD TIME AT AFTER SPINDLE CHANGE SPEED 0.1S 0.1SOIL AIR TIMER 2(UNIT OFF TIMER)OIL AIR TIMER 1(UNIT ON TIMER) 0.1℃0.1℃ SPINDLE OVER HEAT TEMPETURE SPINDLE OVER HEAT DIFFERENCE OF TEMPETURE SPINDLE START DIFFERENCE OF TEMPETURE PALLET AIR BLOW OFF TIMER PALLET AIR BLOW ON TIMER 0.1S 0.01S 0.01S times 0.01S 0.1S 0.1S 0.1S WARM UP WATING TIMERCOOLANT START TIMER WAY LUBE ALARM COUNTCYCLE FIN. BUZZER ON TIMER WAY LUBE OFF TIMERWAY LUBE ON TIMER AUTO POWER OFF DELAY 0.01S 8 9 7 6 5 4 3 2 1R 2180 9 8 7 6 5 4 3 2 1 R 2170 9 8 7 6 5 4 3 2 1 4 8 9R 2160 6 5 3 7 2R 2150 C O M M E N T400ADDRESS PLC DATA (SHORT TYPE) PARAMETER1TABLE UNCLAMP TIMER ATC TOOL CLAMP SENSOR DELAY TIMER SPINDLE TYPE10000rpmATC WAIT POKET SENSER DELAY TIMER HIGH PRESSURE COOLANT START TIMER OIL AIR ALARM COUNTER 100.01S 40.1S10.01SCYCLE FIN. BUZZER TIMER CYCLE FIN. BUZZER OFF TIMER PALLET CHANGE TIMER (FH8800)0.1S PALLET CHANGE HOOK UP TIMER 0.1S144020(NCTABLE:50)18002400APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LISTPLC DATA (2)06/11/2006/11/2006/11/2098 7 6 5 4 3 2 1R 2190 9 8 7 6 5 4 3 2 1 4 8 9R 2280 6 5 3 7 2R 2270 C O M M E N TADDRESS PLC DATA (SHORT TYPE) PARAMETER1*1 2PC:0 6PC:6*2 2PC:0 6PC:3MAX PALLET NUMBER LOADING STATION POSITION*1*2BIT TYPEBIT TYPE BIT TYPE4 8 9 65 3 7 2R 2260 136064APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC DATA (3)06/11/2006/11/2006/11/200.1゜C OVER HEAT FOR 1 SAMPLING SCAN 0READ AND WRITE TIME OVER ALARM COUNTER DATA SCAN 0COUNTER DATA THAT MACHINE HAS TOOL ID OR NOT.(PLC-CMN PARAMETER LIST REFERENCE)00010-700 20080000.1゜CSCAN SCAN SCAN THRESOLDOFFSET VALVE BY ONE TIME FOR AFTER ATC OFFSET VALVE BY ONE TIMEOFFSET EXEC.DELAY COUNTER FOR AFTER ATC OFFSET EXEC.DELAY COUNTERRETRY COUNTER DATA OF RESPONSE SIGNAL RECEIVE ｂｉｔ TYPE8 8 7 7 6 6 5 5R 2844 4 3 2 1R 2340 9CLAMP SPEED AT GAP ELIMINATER ON1st OVERRAID AT GAP ELIMINATER SIGNAL OFF98 7 6 4 5 3 2 1 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1MEMORY 9R 2330R 2320 4 8 9R 2310 6 5 3 7%mm/min2R 2300ADDRESS PLC PARAMETER (DATA TYPE)10.5μ0.5μ5835SCAN TOOL ID DELAY TIMER(TOOL ID OPTION ONLY)200APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC DATA (4)06/11/2006/11/2006/11/2012020 (8m/min) 11 40 10000 5000 5μmATC ARM EXTEND VALVE%%0.01%0.01%0.01%rpmrpmSPINDLE MAX. SPEED GEAR 1 AT VFC SPINDLE MAX. SPEED GEAR 2 AT VFC μmmm/minSEC TOOL LENGTH MEASURE RAPID TRAVERSE OVERRAID AFC UPPER THRESOLDAFC LOWER THRESOLD AFC STEP VALUE OF 2nd OVERRIDE Z AXIS SKIP POSITIONY AXIS START POSITION OF TOOL LENGTH MEASUREAFC MIN. VALUE OF 2nd OVERRIDE AFC ALARM TIME AFTER CLAMPPED 2nd 0V AFC MAX. VALUE OF 2nd OVERRIDE X AXIS START POSITION OF TOOL LENGTH MEASURETOOL LENGTH MEASURE SKIP SPEED8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1R 2890R 2390 9 9μm%μm98 7 6 4 5 3 2 1R 2880 9 8 7 6 5 4 3 2 1R 2870 9 8 7 6 5 4 3 2 1R 2860 9 8 7 6 5 4 2 3 1R 2850 2 1 9 8 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1ACTIVE MEMORY 98 7 6 5 4 3R 2380R 2370 4 8 9R 2360 6 5 3 7DISTANCE OF THE TOW SENSOR SKIP AND DEC.Z AXIS START POSITION OF TOOL LENGTH MEASUREμmμm2R 2350 1105000(41338inch)27000(10630inch)APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC DATA (5)06/11/2006/11/2006/11/201126 -200 74 %%AFC UPPER THRESOLDAFC LOWER THRESOLD98 7 6 5 4 3 2 1R 9 8 7 6 5 4 3 2 1R 9 8 7 6 5 4 2 3 1R 98 7 6 5 4 3 2 1 9 8 7 6 5 4 3 2 1 3ACTIVE MEMORY R 4670 4 8 9R 4620 6 5 7 2R 3980 120000(7874inchi)APR'D BY 45TITLEDRWN BYCHK'D BYPARAMETER LIST PLC DATA (6)06/11/2006/11/2006/11/20TOOL ID 1:VALID 0:INVALID FMC CONTROL ID 1:VALID 0:INVALID MANUAL MEASURE 1:VALID 0:INVALID F E D C B A 987DATA AT MANUAL WRITE 1:ONLY FLAG 0:ALL DATA TOOL ID R RESISTOR LOADE 1:VALID 0:INVALID THERMAL DISPLACEMENT MACRO VARIABLE WRITE 1:VALID 0:IVVALID V100 ONLY 1:VALID 0:INVALID V100 ONLY 1:VALID 0:INVALID V100 ONLY 1:VALID 0:INVALID TOOL ID SERIAL TYPE 1:VALID 0:INVALID TOOL INTERFERENCE MAX FRM 1:VALID 0:INVALIDFMC CONTROL 1:VALID 0:INVALID TOOL ID SERIAL TYPE 1:VALID 0:INVALID TOOL LENGTH TO LIFE INDEX DISPLAY AT READ 1:OFF SET NO. 0:COMPENSATION 4READ AND WRITE TO LIFE CONTROL DISPLAY 1:VALID 0:INVALID ID NO. AT WRITE 1:VALID 0:INVALID LIFE AT WRITE 1:LIFE CONTROL 0:TOOL DATA TOOL LENGTH TO LIFE INDEX DISPLAY AT READ 1:VALID 0:INVALID6521013bit No.COAD THERMAL DISPLACEMENT OFF SET 1:VALID 0:INVALID TOOL DIAMETER READ AND WRITE TOOL COM. TYPE A 1:VALID 0:INVALIDPROTECT SPINDLE TOOL AND NEXT TOOL NO. OF WRITE1:VALID 0:IVVALID FLAG AT WRITE 1:LIFE OR TOOL 0:TOOL DATA FLAG TO LIFE INDEX DISPLAY AT READ 1:VALID 0:INVALID READ AND WRITE TO ID NO. GROUP NO. 1:VALID 0:INVALID TOOL DIAMETER AT WRITE 1:LIFE CONTROL 0:TOOL DATA TIME TO LIFE INDEX DISPLAY AT READ 1:VALID 0:INVALID TOOL LENGTH AT WRITE 1:LIFE CONTROL 0:TOOL DATA TOOL LENGTH TO LIFE INDEX DISPLAY AT READ 1:OFF SET NO. 0:COMPENSATION TOOL LENGTH TO LIFE INDEX DISPLAY AT READ 1:VALID 0:INVALIDF E D C B A 98765432101248124812481248R 2301FMS PALLET ID 1:VALID 0:INVALID VARIABLE TIMER 1:VALID 0:INVALID COAD bit No.V100 ONLY 1:VALID 0:INVALID 248124812481248R 2300APR'D BY 45TITLEDRWN BYCHK'D BYPLC-CMNPARAMETER LIST (1)06/11/2006/11/2006/11/20MEASUREMENT DATA AT WRITE 1:VALID 0:INVALID PALLET NO. DISPLAY TO MACHINING CONTROL DISPLAY 1:VALID 0:INVALID FIXTURE OFF SET AT WRITE 1:VALID 0:INVALID F E D C B A 987H-400N HEAD 1ch TYPE 1:VALID 0:INVALID 1: 0:MACHINING UN FINISH / NACHINING FLAG AT WRITE 1:VALID 0:INVALID ARBITRARY 1 BYTE WRITE AT WRITE 1:HEAD No.1 0:HEAD No.2COMMUNICATION PARAMETER MANUAL INPUT 1:VALID 0:INVALID PROGRAM DISPLAY TO MACHINING CONTROL DISPLAY 1:VALID 0:INVALIDNOTE 1: 1: 0:COMMUNICATION PARAMETER MANUAL INPUT 1:VALID 0:INVALID 46521013bit No.COAD 1: 0:USR 1 DISPLAY COMPULSION PARAMETER 1:VALID 0:INVALID USR 1 PARAMETER 1:VALID 0:INVALID F E D C B A 98765432101248124812481248R 2303NOTE 1: 1: 0:BASIC COORDINATE AT WRITE 1:VALID 0:INVALID COAD bit No.ARBITRARY 1 BYTE WRITE AT WRITE 1:VALID 0:INVALID248124812481248R 2302USR 2 PARAMETER 1:VALID 0:INVALID USR 3 PARAMETER 1:VALID 0:INVALID USR 4 PARAMETER 1:VALID 0:INVALID USR 5 PARAMETER 1:VALID 0:INVALID USR 6 PARAMETER 1:VALID 0:INVALID USR 7 PARAMETER 1:VALID 0:INVALID USR 8 PARAMETER 1:VALID 0:INVALID USR 2 DISPLAY COMPULSION PARAMETER 1:VALID 0:INVALID USR 3 DISPLAY COMPULSION PARAMETER 1:VALID 0:INVALID USR 4 DISPLAY COMPULSION PARAMETER 1:VALID 0:INVALID USR 5 DISPLAY COMPULSION PARAMETER 1:VALID 0:INVALID USR 6 DISPLAY COMPULSION PARAMETER 1:VALID 0:INVALID USR 7 DISPLAY COMPULSION PARAMETER 1:VALID 0:INVALID USR 8 DISPLAY COMPULSION PARAMETER 1:VALID 0:INVALIDbit 7bit 6COMMON VARIABLE001010#530～#549#580～#599#680～#699NOTE 1:APR'D BY 45TITLEDRWN BYCHK'D BYPLC-CMNPARAMETER LIST (2)06/11/2006/11/2006/11/20TOOL USE WRONG FLAG 1:VALID 0:INVALID F E D C B A 987NEXT PALLET NO. OUTPUT 1:VALID 0:INVALID 4DC BATTERY LIFE CHECK 1:VALID 0:INVALID 6521013bit No.COAD NUMBER OF TIME 1:ADD 0:SUBTRACT AFTER MACHINING FINISH LAST PLAN AUTO ALLOTMENT1:STAND 0:MEANLOADING STATION FINISH OPERATION 1:OK 0:STAND F E D C B A 98765432101248124812481248R 2305TOOL DATA ID NO. DISPLAY 1:HEXA DECIMAL 0:DECIMAL COAD bit No.248124812481248R 23041: 0:1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0:1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0: 1: 0:APR'D BY 45TITLEDRWN BYCHK'D BYPLC-CMNPARAMETER LIST (3)06/11/2006/11/2006/11/20NOTE 1 : 10111 FH680F E D C B A 987V40 TOOL LENGTH TYPE CHANGED INPUT DUMMY AT EXTENSION ONESELF DIAG. 46521013USR 3 MENU KEY NOTE 1 :THERMAL DISPLACEMENT MACHINE TYPECOAD bit No.248124812481248R 23091: 0:1: 0:1: 0:1: 0:1: 0:1: 0:1: 0:1: 0:1: 0:1: 0:1: 0:1:VALID 0:INVALID 1:VALID 0:INVALID1: 0:1: 0:1:VALID 0:INVALIDAPR'D BY 45TITLEDRWN BYCHK'D BYPLC-CMNPARAMETER LIST (4)06/11/2006/11/2006/11/20。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
物質安全資料表Material Safety Data Sheet1) ) 产品名称: DNR-L300-D1(21.8) (负光阻)Product Name: DNR-L300-D1(21.8)(Chemically amplified Negative resist)2) 建議用途及限制使用：Advisable use and RestrictionA. 建議用途：Photoresist for semicunductorHigh viscosity polymeric material3) 制造者/ 供货商信息Manufacturer/Supplier/Distributor informationA. 制造商名称Company : DONGJIN SEMICHEM Inc.B. 制造商地址Address :625-3, Yodang-Ri, Yanggam-Myeon, Hwaseong-Si, Gyeonggi-Do, KOREAC. 紧急联络电话/传真Emergency response number :电话TEL：TAIWAN : (04) 7580475 KOREA : ++82-31-353-6340传真FAX：TAIWAN : (04) 7580473 KOREA : ++82-31-353-6339D. 部门Division：半导体开发部门SEMI-CONDUCTOR, YOUNG SAM KIME. 供货商名称Supplier name：台湾东进化成股份有限公司TAIWAN DONGJIN SEMICHEM CO., LTDF. 供货商地址Supplier address：台湾省彰化县伸港乡蚵寮村彰滨工业区线工北一路21号No. 21 Hsiengong north 1st Rd, Changbin ind. Complex, Chang Hua Hsien, 509 Taiwan, R.O.C1) 物品危害分類Hazard classification :第3级易燃液体Flammable liquids Cat 3第1级眼睛严重损伤/刺激眼睛Serious eye damage/ eye irritation Cat 12) 標示內容Allocation label elementsA. 象征符号Symbol :B. 警示语Signal word: 危險DangerC. 危害险声明Hazard statements- 导致严重的眼睛损伤Causes serious eye damage- 易燃液体和蒸气Flammable liquid and vapourD. 危害防範措施Precautionary statements- 预防Prevention•P210远离热/火花/明火/热的表面- 禁止抽烟。
P210 Keep away from heat/sparks/ open flames/ hot surfaces.- No smoking•P233保特容器紧紧关闭。
P233 Keep container tightly closed.•P240容器接地和接受设备。
P240 Ground/bond container and receiving equipment.•P241使用防爆电子或通风的照明设备或配备。
P241 Use explosion-proof electrical/ventilating/ lighting/equipment.•P242使用不爆火花的工具。
P242 Use only non-sparking tools.•P243预先警戒措施预防静电。
P243 Take precautionary measures against static discharge.• P280穿戴防护手套/衣服/护目镜/脸部防护。
P280 Wear protective gloves/cloths/ eye protection/face protection.- 緊急救護Response• P303+P361+P353衣服(或头发)：立刻去除或脱掉所有污染的衣物，用大量水冲洗皮肤。
P303+P361+P353 If on skin (or hair): Remove/ take off immediately all contaminatedclothing. Rinse skin with water/shower.•P370+P378在火灾的情况下：使用干粉、二氧化碳、泡沫灭火器或喷水扑灭。
P370+P378 In case of fire: Use dry chemical, carbon dioxide, water spray or regularfoam for extinction.•P305+P351+P338眼睛：使用大量水谨慎冲洗几分钟。
若允许请先除去隐形眼镜，持续冲洗。
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Removecontact lenses, if present and easy to do. Continue rinsing.•P310立即呼叫医生、医师或到危害中心。
使用泡沫消灭。
P310 Immediately all a POISON CENTER or doctor/physician- 保管Storage•P403+P235储存品放置在通风及保持凉快的地方。
P403+P235 Store in a well-ventilated place. Keep cool.- 处置Disposal•P501处置溶剂和容器的法规章程(需符合地方/地区/国家/国际的法规章程。
)P501 Dispose of contents/container to (in accordance with local/regional/ national/ international regulations.)E. 在危险分类中没包括的其它危险信息：Other hazard information not included in hazard classification:- NFPA评估系统：健康0 燃烧性3 反应性0- NFPA Rating system: Health 0 Flammability 3 Reactivity 0※上面内容为商业秘密，禁止泄露于其它公司。
The information above is trade secret so that leak is prohibited to the othercompanies.A. 眼睛接觸Eye contact:-立刻用水或食盐水冲洗眼睛至少15分钟，经常缩回眼皮。
For minimum 15 minutes washes with the many double meaning water.-直接治療。
Get immediate medical attention.B. 皮膚接觸Skin contact:-立刻去除污染的衣物和鞋子。
-用肥皂和大量水或温热水洗涤受影响的范围。
如果刺激持续，立刻寻求治疗。
After quickly removing the clothing which is imbrued and shoes etc. washes with thewater and the soap.-在使用之前，彻底的清洗和烘干污染的衣物和鞋子。
Launder and dry contaminated clothing and shoes thoroughly before reuse.C. 吸入Inhalation:-立刻让新鲜空气流通并且保持受害者的温暖与安静。
Immediately moves with the place which has the fresh air.-直接治療。
Get immediate medical attention.D. 吞食Ingestion:-如果受害者有知觉，喝一两杯水并且与医师联系。
-不要導致嘔吐。
In order to drink the case water which will be ceremony and according to medical advice induces a vomit.-直接治療。
Get immediate medical attention.E. 深刻/慢性作用和症状：Acute/chronic effects and symptoms:呼吸器刺激，皮肤刺激，眼睛刺激。
Respiratory organ magnetic pole, Skin magnetic pole, Eye magnetic pole.F. 对医师的忠告Advice to physician:-如果呼吸是不顺畅或终止，给予氧气并且执行人工呼吸。
If breathing is irregular or stopped, give oxygen and administer artificial respiration.-选择适当的清洗场所。
Considers intake at the time of place washing.A. 適用滅火劑Extinguishing media:-化学干粉、二氧化碳、酒精泡沫、水。
Dry chemical, CO2, Alcohol foam, waterB. 危险从化学制品：(例：危险的燃烧产品)Hazards from chemical product : (Ex: hazardous combustion products)-形成氧化碳和二氧化碳。
Forming carbon oxide and carbon dioxide.-如果吸入氧化碳，可能导致致命。
If inhaled, carbon oxide may fatal.-如果二氧化碳过度浓密，会产生窒息现象。
If concentrated, carbon dioxide uses as asphyxiant.C. 防护服装和消防：Protective clothing and fire fighting:-在进入通风闭合的空间之前，注意消防和风的方向。
Notice direction of the wind for fire fighting and ventilate closed spaces before entering.-如果您能从火灾范围移动容器，并且没有风险。