四)EWSA使用说明
EWSA使用教程
EWSA使用教程EWSA使用教程一、软件介绍：软件由俄罗斯的ElcomSoft软件公司出品，软件全称：Elcomsoft Wireless Security Auditor(以下简称为EWSA)，最新版本为v1.0.0.133版，支持的操作系统有：Windows 2000/XP/2003/Vista/2008.这款软件的特点是：利用GPU的运算性能快速攻破无线网络WPA-PSK及WPA2-PSK密码，运算速度相比单独使用CPU可提高最多上百倍。
二、EWSA软件安装：安装很简单，双击打开setup.exe后选择英文，OK后即可见到安装向导。
基本上就是一路Next即可将EWSA安装到硬盘上。
软件安装后第一次运行提示为DEMO版本，过15秒后会自动进入主程序，三、支持EWSA的显卡列表：1、NVIDIA显卡GeForce 8, 9, 200 Series及更高版本(至少256MB显存)、Quadro FX 4600以后推出的专业绘图卡、TESLA C870,D870,S870,C1060,S1070需要特别注意的是GeForce 8xxx以后所推出的绘图卡须安装CUDA 182.22以后版本的驱动程序2、ATI显卡RADEON HD 3000 Series、RADEON HD 4600 Series、RADEON HD 4800 Series及更高版本、FireStream 9170,9250,9270 FireStream 9170,9250,9270和N卡一样要注意的是Radeon 3xxx以后所推出的绘图卡须安装CATALYST 9.2以后版本的驱动程序四、EWSA的使用1、打开EWSA，先进行自检。
在主界面上分别选择“Options”中的“CPU Options”及“GPU Power”，可看到如下两图所示，下图为打开“CPU Options”显示的软件自身CPU检测结果下图为打开“GPU Power”显示的检测到的显卡型号，此处为GeForce 8500 GT。
AWP Super Series 空气工作平台说明书
SpecificationsMeasurements US Metric US Metric US MetricProductivityLift capacity 350 lbs 159 kg 350 lbs 159 kg 350 lbs 159 kgANSI/CSA:Standard 27/26/44.75 in .69/.66/1.14 m 27/26/44.75 in .69/.66/1.14 m 27/26/44.75 in .69/.66/1.14 m Gated standard 27/26/44.75 in .69/.66/1.14 m 27/26/44.75 in .69/.66/1.14 m 27/26/44.75 in .69/.66/1.14 m Gated narrow 26/20/44.75 in .66/.51/1.14 m 26/20/44.75 in .66/.51/1.14 m 26/20/44.75 in .66/.51/1.14 m Gated ultra-narrow 22/18/44.75 in .56/.46/1.14 m 22/18/44.75 in .56/.46/1.14 m 22/18/44.75 in .56/.46/1.14 m Standard fiberglass 29/26.5/43.5 in .74/.67/1.10 m 29/26.5/43.5 in .74/.67/1.10 m 29/26.5/43.5 in .74/.67/1.10 mPowerPower source - DC models 12V 110/50-60 Hz or 220/50-60 Hz AC 12V 110/50-60 Hz or 220/50-60 Hz AC 12V DC 110/50-60 Hz or 220/50-60 Hz ACWeightAC models (Standard) 677 lbs 307 kg 727 lbs 330 kg 777 lbs 352 kgAC models (RT/Narrow) 660 lbs 299 kg 694 lbs 315 kg 729 lbs 331 kgDC models (Standard) 766 lbs 347 kg 817 lbs 371 kg 867 lbs 393 kgDC models (RT/Narrow) 749 lbs 340 kg 780 lbs 354 kg 818 lbs 371 kgAir motor (Standard) ——— ——— ——— ——— 777 lbs 352 kgAir motor (RT/Narrow) ——— ——— ——— ——— 729 lbs 331 kgStandards Compliance ANSI A92.3, CSA B354.1, EN 280, AS 1418.10* T he metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height. ** T ilt back height with standard platform. For tilt back height with other platforms, please contact your sales representative.*** C orner of platform top rail to corner of wall with ability to rotate leveling jack handle.SpecificationsMeasurementsUSMetric USMetricWorking height* 42 ft 5 in 13.10 m 46 ft 4 in 14.29 mPlatform height 36 ft 5 in 11.10 m 40 ft 4 in 12.29 m ProductivityLift capacity 350 lbs 159 kg 300 lbs 136 kg ANSI/CSA: Standard 27/26/44.75 in .69/.66/1.14 m 27/26/44.75 in .69/.66/1.14 m Gated standard 27/26/44.75 in .69/.66/1.14 m 27/26/44.75 in .69/.66/1.14 m Gated narrow26/20/44.75 in .66/.51/1.14 m 26/20/44.75 in .66/.51/1.14 m Gated ultra-narrow 22/18/44.75 in .56/.46/1.14 m 22/18/44.75 in .56/.46/1.14 m Standard fiberglass29/26.5/43.5 in.74/.67/1.10 m29/26.5/43.5 in.74/.67/1.10 mPowerPower source - DC models12V 110/50-60 Hz or 220/50-60 Hz AC12V 110/50-60 Hz or 220/50-60 Hz ACWeightAC models (Standard) 1,017 lbs 461 kg 1,040 lbs 472 kg AC models (RT)——— ——— ——— ——— DC models (Standard) 1,107 lbs 502 kg 1,130 lbs 513 kg DC models (RT) ——— ——— ——— ——— Air motor (Standard) ——— ——— ——— ——— Air motor (RT)————————————Standards ComplianceANSI A92.3, CSA B354.1, EN 280, AS 1418.10Effective Date: February, 2015. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2015 Terex Corporation.Genie United States18340 NE 76th Street P .O. Box 97030Redmond, Washington 98073-9730 Telephone +1 (425) 881-1800Toll Free in USA/Canada +1 (800)-536-1800 Fax +1 (425) 883-3475Distributed By:FeaturesProductivity• Super-straddle• Descent light and alarm package • Work station tool tray (not available on narrow or ultra-narrow platofrm)• Fluorescent tube caddy (not available on fiberglass platform)• Platform locating laser lightPower• Air motor power 1.5 hp (1.1 kW) (AWP ™-30 only)Platform Options• Gated standard platform • Gated narrow platform• Gated ultra-narrow platform • Standard fiberglass platformBase Options• Rough terrain (RT) base (AWP ™-20, -25, -30 only)• Narrow base (AWP-20, AWP-25, AWP-30 only)MeasurementsAWP-20S• 26 ft 1 in (8.12 m) working height • 20 ft 1 in (6.12 m) platform height • 2 ft 5 in (.74 m) standard base width • 2 ft 6 in (.76 m) RT base width • 1 ft 11 in (.58 m) narrow base width • Up to 350 lbs (159 kg) lift capacity AWP-25S• 30 ft 10 in (9.57 m) working height • 24 ft 10 in (7.57 m) platform height • 2 ft 5 in (.74 m) standard base width • 2 ft 6 in (.76 m) RT base width • 1 ft 11 in (.58 m) narrow base width • Up to 350 lbs (159 kg) lift capacity AWP-30S• 35 ft 6 in (11.02 m) working height • 29 ft 6 in (9.02 m) platform height • 2 ft 5 in (.74 m) standard base width • 2 ft 6 in (.76 m) RT base width• 1 ft 11 in (.58 m) narrow base width • Up to 350 lbs (159 kg) lift capacity AWP-36S• 42 ft 5 in (13.10 m) working height • 36 ft 5 in (11.10 m) platform height • 2 ft 5 in (.74 m) standard base width • Up to 350 lbs (159 kg) lift capacity AWP-40S• 46 ft 4 in (14.29 m) working height • 40 ft 4 in (12.29 m) platform height• 2 ft 5 in (.74 m) standard base width • Up to 300 lbs (136 kg) lift capacityProductivity• Auxiliary platform lowering • Most rigid mast in the industry• Rocker base system for maneuverability • Tilt back frame(standard on AWP ™-36, -40)• Easily rolls through standard doorways • AC power to platform• Dual activated up/down switch• Ground fault interrupt (ANSI / CSA only)• Small outrigger footprints • Outrigger storage sockets • Easy loading in pickup trucks • Tie down attachment points• Overhead crane attachment point • Wide, rear access forklift pocket • LED lights confirm proper set-upPower• AC power 85V / 50-60 Hz • AC power 110V / 50-60 Hz • AC power 220V / 50-60 Hz• DC power with worldwide automatic “smart” charging system (12V / 110V / 230V / 50-60 Hz)AWPS 0210K. Part No. 109380Super Straddle Models AWP-36S AWP-40S Measurements US Metric US Metric US MetricANSI, CSA 5 ft 9 in 1.75 m 5 ft 9 in 1.75 m 6 ft 9 in 2.05 mCE, AUS 5 ft 9 in1.75 m 6 ft 9 in2.05 m 7 ft 7 in2.31 m Storage dimensions (l/w/d)80/37/24 in2.03/0.94/0.61 m80/37/24 in2.03/0.94/0.61 m80/37/24 in2.03/0.94/0.61 mWeight580 lbs263 kg580 lbs263 kg580 lbs263 kgMeasurements US Metric US MetricANSI, CSA 8 ft 5 in 2.57 m 9 ft 1 in 2.77 m CE, AUS 8 ft 5 in2.57 m 9 ft 1 in2.77 m Weight580 lbs263 kg580 lbs263kgSpecifications。
Sennheiser ew 系列无线麦克风系统用户手册说明书
The ew 322 G3 consists of the same components as ew 312 G3but with a compact cardioid clip-on microphone.The ew 352 G3 consists of the same components as ew 312 G3but with a headworn cardioid microphone.FEATURESSturdy metal housing(transmitter and receiver)42 MHz bandwidth: 1,680 tunable UHF frequencies for interference-free reception20 frequency banks with up to 24 compatible frequenciesEthernet port for connecting to theWireless Systems Manager (WSM) software for control via computer High-quality true diversity receptionPilot tone squelch for eliminating RF inter- ference when transmitter is turned off Automatic frequency scan feature searches for available frequencies Enhanced AF frequency rangeIncreased range for audio sensitivity Wireless synchronization of transmitter parameter from receiverUser-friendly menu operation with more control optionsIlluminated graphic display, receiver also shows transmitter settingsAuto-Lock function avoids accidental changing of settingsHDX compander for crystal-clear sound Transmitter feature battery indicatation in 4 steps, also shown on receiver display Programmable Mute function Integrated Equalizer and Soundcheck modeContacts for recharging BA 2015 accupack directly in the transmitter Wide range of accessories adapts the system to any requirementThe ew 312 G3 is a wireless microphone set, consisting of a True Diversityreceiver, a bodyworn transmitter, a compact omni directional clip-on micropho-ne plus accessories.The bodypack transmitter features charging contacts for the optional recharge-able battery. Sync up the bodypack to the receiver wirelessly with the new wireless sync. Backlit graphic displays make them easy to read under all lighting conditions.ew 300 Setsew 312 G3 Presentation Set ew 322 G3 Presentation Set ew 352 G3 Head Setew 335/345/365 G3 Vocal SetsFEATURESew 335 G3/ew 345 G3/ew 365 G3 Vocal SetsSee above mentioned list of features plus Programmable Mute switch, easyaccessableHandheld transmitter with easy-exchangeable microphone heads from evolution series The ew 335 G3 is a wireless microphone set, consisting of a True Diversity receiver, a handheld transmitter with e 835 microphone head plus accessories. It is versatile for every style of music and presentations. A wireless link from receiver to the transmitter allows synchronization of frequencies for easy setup. Backlit graphic displays make them easy to read under all lighting conditions. The ew 345 G3 consists of the same components as ew 335 G3but with an e 845 microphone head.The ew 365 G3consists of the same components as ew 335 G3but with an e 865 microphone head.ARCHITECT’S SPECIFICATIONSew 312 G3 Presentation SetComplete plug & play wireless microphone set with clip-on microphone (condenser, omni-directional) from Sennheiser evolution series for multi-purpose application. The devices shall have metal housings for rugged use. 42 MHz bandwidth with 1,680 tunable frequencies. 20 banks with up to 24 compatible frequencies, 1 bank for individual selectable frequencies, scan function and wireless synchronization to the transmitter for easy setup. HDX compander delivers high-quality sound performance. All parameters of transmitter and receiver can be monitored and controlled via Wireless Systems Manager (WSM) software from PC. The transmitter shall have a sensitivity range of 48 dB. The receiver offers a maximum output level of +18 dBu (+6 dB gain). True Diversity and pilot tone squelch for interference-free reception. Charging contacts on transmitter for recharging BA 2015 accupack directly in the transmitter shall be available. 3-step battery + LowBattery indication on transmitter and receiver shall give reliable information on operation time.Menu operation, auto-lock function and illuminated graphic displays on transmitter and receiver for user-friendly operation.A RF Mute function on transmitter and receiver allows offline settings.An easy accessable Mute switch on the transmitter can be programmed for AF on/off, RF on/off.A suitable Remote Mute Switch option also allows push-to-talk and push-to-muteAn equalizer and soundcheck mode is inte g rated in the receiver.ew 322 G3 Presentation SetComplete plug & play wireless microphone set with clip-on microphone (electret, cardioid) from Sennheiser evolution series for multi-purpose application. Further discription see paragraph ew 312 G3.ew 352 G3 Head SetComplete plug & play wireless microphone set with headworn microphone (condenser, cardioid) for hands-free application. Further discription see paragraph ew 312 G3.ew 335 G3 Vocal SetComplete plug & play wireless microphone set with easy-exchangeable e 835 microphone head (dynamic, cardioid) from Sennheiser evolution series for multi-purpose application. Further discription see paragraph ew 312 G3.ew 345 G3 Vocal SetComplete plug & play wireless microphone set with easy-exchangeable e 845 microphone head (dynamic, supercardioid) from Sennheiser evolution series for multi-pur p ose application. Further discription see paragraph ew 312 G3.ew 365 G3 Vocal SetComplete plug & play wireless microphone set with easy-exchangeable e 865 microphone head (electret-condenser, supercardioid) from Sennheiser evolution series for multi-purpose application. Further discription see paragraph ew 312 G3.SySTEMRF frequency range ................................................516.....865 MHzTransmission/receiving frequencies ...................1,680Frequency banks ..................................................... 20 (factory presets)6 (user presets)Presets .......................................................................24 max.Switching bandwidth .............................................42 MHzCompander ...............................................................HDXSignal-to-noise ratio ..............................................> 115 dB(A)THD, total harmonic distortion ............................< 0.9 %RECEIvERAF Frequency response..........................................25…18,000 HzAntenna connectors ...............................................BNC, 50 OhmAudio outputs .......................................................... X LR: +18 dBu max6.3 mm jack: +10 dBu maxDimensions ...............................................................212 x 202 x 43 mmWeight .......................................................................980 gTRANSMITTERRF output power .....................................................10/30 mW switchableOperating time ........................................................typ. 8hInput voltage range ................................................1.8 v lineInput voltage range ................................................2.4 v lineDimensions ...............................................................82 x 64 x 24 mmWeight .......................................................................~ 160 gMICROPHONETransducer; Microphone type ...............................permanent polarizedAF sensitivity ...........................................................1.6 mv/PaFrequency response ...............................................80.....18,000 HzPick-up pattern ........................................................omni-directionalContinued on page 5EM 300Modulation ...............................................................wideband FMRF frequency range ................................................ 516 – 558, 566 – 608, 626 – 668, 734 –776, 780 – 822, 823 – 865 MHz Transmission/receiving frequencies ...................1,680, tuneable in steps of 25 kHzReceiving frequencies ............................................ 1,680 frequencies, tuneable in steps of 25 kHz20 frequency banks, each with up to 24 factory-preset channels,intermodulation-free20 frequency banks with up to 24 user programmable channelsSwitching bandwidth .............................................42 MHzNominal/peak deviation .......................................±24 kHz/±48 kHzReceiver principle ....................................................true diversitySensitivity (with HDX, peak deviation) .............< 2 μv for 52 dBA rms S/NAdjacent channel rejection ...................................typ. ≥ 75 dBIntermodulation attenuation ...............................typ. ≥ 70 dBBlocking .....................................................................≥ 75 dBSquelch ...................................................................... O ff, 5 to 25 dBμv, adjustable in steps of 2 dBPilot tone squelch ...................................................can be switched offAntenna inputs .......................................................2 BNC socketsCompander system .................................................Sennheiser HDXEQ presets (switchable, affect the line and monitor outputs):Preset 1: “Flat”Preset 2: “Low Cut” ................................................–3 dB at 180 HzPreset 3: “Low Cut/High boost” .......................... –3 dB at 180 Hz+6 dB at 10 kHzPreset 4: “High Boost” ...........................................+6 dB at 10 kHzS/N ratio (1 mv, peak deviation) ........................≥ 115 dBATHD .............................................................................≤ 0.9 %AF output voltage (at peak deviation,1 kHz AF) .................................................................. ¼” (6.3 mm) jack socket (unbalanced): +12 dBuXLR socket (balanced): +18 dBuAdjustment range of audio output level ........... 48 dB, adjustable in steps of 3 dB +6 dB gain reserveTemperature range .................................................–10 °C to +55 °CPower supply............................................................12 vPower consumption:...............................................350 mADimensions ...............................................................approx. 202 x 212 x 43 mmWeight (incl. batteries) .........................................approx. 980 gIn compliance with .................................................. C E, FCC, ETS 300422, ETS 300445MAINS UNITInput voltage............................................................100 to 240 v~, 50/60 HzPower/current consumption ................................max. 120 mAOutput voltage ........................................................12 vSecondary output current .....................................400 mATemperature range .................................................–10 °C to +40 °CIn compliance with .................................................. C E, FCC, IC, ETS 300422, ETS 300445Continued on page 6SK 300 and SKM 300Modulation ...............................................................wideband FMRF frequency range ................................................ 516 – 558, 566 – 608, 626 – 668, 734 –776, 780 – 822, 823 – 865 MHz Transmission/receiving frequencies ...................1,680, tuneable in steps of 25 kHzReceiving frequencies ............................................ 1,680 frequencies, tuneable in steps of 25 kHz20 frequency banks, each with up to 24 factory-preset channels, intermodulation-free6 frequency banks with up to 24 user programmable channelsSwitching bandwidth .............................................42 MHzNominal/peak deviation .......................................±24 kHz/±48 kHzFrequency stability .................................................≤ ±15 ppmRF output power at 50 O......................................typ. 10/30 mW, switchablePilot tone squelch ...................................................can be switched offAF characteristicsCompander system .................................................Sennheiser HDXAF frequency responseSK ................................................................................ m icrophone: 80 –18,000 Hzline: 25 –18,000 HzSKM ............................................................................80 –18,000 HzS/N ratio (1 mv, peak deviation) ........................≥ 115 dBATHD .............................................................................≤ 0.9 %Max. input voltage (SK) microphone/line ........3 vrmsInput impedance (SK) microphone/line ...........40 k O, unbalanced/1 M OInput capacitance (SK) ..........................................switchableAdjustment range of input sensitivity .............. S K: 60 dB, adjustable in steps of 3 dBSKM: 48 dB, adjustable in steps of 6 dBIn compliance with .................................................. C E, FCC, IC, ETS 300422, ETS 300445OvERALL DEvICETemperature range .................................................−10 °C to + 55 °CPower supply ........................................................... 2 AA size batteries, 1.5 v orBA 2015 accupackNominal voltage .....................................................2.4 vCurrent consumption: at nominal voltage ........typ. 180 mA (30 mW)with switched-off transmitter .............................≤ 25 μAOperating time .......................................................typ. 8 hrsDimensions ............................................................... S K: approx. 82 x 64 x 24 mmSKM: approx. Ø 50 x 265 mmWeight (incl. batteries) ......................................... S K: approx. 160 gSKM: approx. 450 gIn compliance with .................................................. C E, FCC, IC, ETS 300422, ETS 300445Continued on page 7Microphones (SK 300)ME 2ME 3-ew ME 4Microphone type .............................condenser condenser condenserSensitivity .........................................20 mv/Pa 1.6 mv/Pa40 mv/PaPick-up pattern ................................omni-directional cardioid cardioidMax. SPL ............................................130 dB SPL150 dB SPL120 dB SPL Microphone heads (SKM 300)MMD 835-1MMD 845-1MMK 865-1Radio microphone type .................dynamic dynamic condenserSensitivity ......................................... 2.1 mv/Pa 1.6 mv/Pa 1.6 mv/PaPick-up pattern ................................cardioid super-cardioid cardioid/super-cardioid,switchableMax. SPL ............................................154 dB SPL154 dB SPL152 dB SPL Frequency response .......................80.....18,000 Hz80.....18,000 Hz80.....18,000 HzDELIVERY INCLUDES for ew 312 / ew 322 / ew 352 G31 EM 300 G3 rack-mount receiver1 SK 300 G3 bodypack transmitter1 ME2 clip-on microphone (omni-directional) or1 ME 4 clip-on microphone (cardioid) or1 ME 3-ew headset microphone (cardioid)1 GA 3 rack mount1 NT2 power supply unit2 Antennas2 AA batteries1 Instruction manualDELIVERY INCLUDES for ew 335 / ew 345 / ew 365 G31 S KM 300-835 handheld transmitterwith cardioid dynamic head or1 S KM 300-845 handheld transmitterwith super-cardioid dynamic head or1 S KM 300-865 handheld transmitterwith super-cardioid condenser head1 EM 300 G3 rack receiver1 MZQ 1 microphone clip1 NT2 power supply unit2 Antennas1 GA 3 Rack mount kit2 AA batteries1 Instruction ManualPOLAR PATTERN0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 HzMMD 835-1MME 865-1MMD 845-10510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 Hz0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 HzME 3-ewME 4-ew0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 Hz0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 HzPRODUCT VARIANTSew 312 G3 Presentation Set Cat. No. ew 312 G3-A-EU 516 – 558 MHz 503112 ew 312 G3-A-US 516 – 558 MHz 503330 ew 312 G3-G-EU 566 – 608 MHz 503331 ew 312 G3-G-US 566 – 608 MHz 503332 ew 312 G3-B-EU 526 – 668 MHz 503333 ew 312 G3-B-US 526 – 668 MHz 503334 ew 312 G3-C-EU 734 –776 MHz 503335 ew 312 G3-C-US 734 –776 MHz 503336 ew 312 G3-D-EU 780 – 822 MHz 503337 ew 312 G3-D-EU-X 780 – 822 MHz 503338 ew 312 G3-D-UK 780 – 822 MHz 503339 ew 312 G3-E-EU 823 – 865 MHz 503340 ew 312 G3-E-EU-X 823 – 865 MHz 503341 ew 312 G3-E-UK 823 – 865 MHz 503342 ew 312 G3-GB 606 – 648 MHz 504649 ew 322 G3 Presentation Set Cat. No. ew 322 G3-E-UK 823 – 865 MHz 503357 ew 322 G3-A-EU 516 – 558 MHz 503113 ew 322 G3-A-US 516 – 558 MHz 503345 ew 322 G3-G-EU 566 – 608 MHz 503346 ew 322 G3-G-US 566 – 608 MHz 503347 ew 322 G3-B-EU 626 – 668 MHz 503348 ew 322 G3-B-US 626 – 668 MHz 503349 ew 322 G3-C-EU 734 –776 MHz 503350 ew 322 G3-C-US 734 –776 MHz 503351 ew 322 G3-D-EU 780 – 822 MHz 503352 ew 322 G3-D-EU-X 780 – 822 MHz 503353 ew 322 G3-D-UK 780 – 822 MHz 503354 ew 322 G3-E-EU 823 – 865 MHz 503355 ew 322 G3-E-EU-X 823 – 865 MHz 503356 ew 322 G3-GB 606 – 648 MHz 504650 ew 352 G3 Presentation Set Cat. No. ew 352 G3-A-EU 516 – 558 MHz 503114 ew 352 G3-A-US 516 – 558 MHz 503360 ew 352 G3-G-EU 566 – 608 MHz 503361 ew 352 G3-G-US 566 – 608 MHz 503362 ew 352 G3-B-EU 526 – 668 MHz 503363 ew 352 G3-B-US 526 – 668 MHz 503364 ew 352 G3-C-EU 734 –776 MHz 503365 ew 352 G3-C-US 734 –776 MHz 503366 ew 352 G3-D-EU 780 – 822 MHz 503367 ew 352 G3-D-EU-X 780 – 822 MHz 503368 ew 352 G3-D-UK 780 – 822 MHz 503369 ew 352 G3-E-EU 823 – 865 MHz 503370 ew 352 G3-E-EU-X 823 – 865 MHz 503371 ew 352 G3-E-UK 823 – 865 MHz 503372 ew 352 G3-GB 606 – 648 MHz 504651ew 335 G3 Vocal Set Cat. No. ew 335 G3-A-EU 516 – 558 MHz 503115 ew 335 G3-A-US 516 – 558 MHz 503375 ew 335 G3-G-EU 566 – 608 MHz 503376 ew 335 G3-G-US 566 – 608 MHz 503377 ew 335 G3-B-EU 526 – 668 MHz 503378 ew 335 G3-B-US 526 – 668 MHz 503379 ew 335 G3-C-EU 734 –776 MHz 503380 ew 335 G3-C-US 734 –776 MHz 503381 ew 335 G3-D-EU 780 – 822 MHz 503382 ew 335 G3-D-EU-X780 – 822 MHz 503383 ew 335 G3-D-UK 780 – 822 MHz 503384 ew 335 G3-E-EU 823 – 865 MHz 503385 ew 335 G3-E-EU-X823 – 865 MHz 503386 ew 335 G3-E-UK 823 – 865 MHz 503387 ew 335 G3-GB 606 – 648 MHz 504652 ew 345 G3 Vocal Set Cat. No. ew 345 G3-A-EU 516 – 558 MHz 503116 ew 345 G3-A-US 516 – 558 MHz 503390 ew 345 G3-G-EU 566 – 608 MHz 503391 ew 345 G3-G-US 566 – 608 MHz 503392 ew 345 G3-B-EU 526 – 668 MHz 503393 ew 345 G3-B-US 526 – 668 MHz 503394 ew 345 G3-C-EU 734 –776 MHz 503395 ew 345 G3-C-US 734 –776 MHz 503396 ew 345 G3-D-EU 780 – 822 MHz 503397 ew 345 G3-D-EU-X780 – 822 MHz 503398 ew 345 G3-D-UK 780 – 822 MHz 503399 ew 345 G3-E-EU 823 – 865 MHz 503400 ew 345 G3-E-EU-X823 – 865 MHz 503401 ew 345 G3-E-UK 823 – 865 MHz 503402 ew 345 G3-GB 606 – 648 MHz 504653 ew 365 G3 Vocal Set Cat. No. ew 365 G3-A-EU 516 – 558 MHz 503117 ew 365 G3-A-US 516 – 558 MHz 503405 ew 365 G3-G-EU 566 – 608 MHz 503406 ew 365 G3-G-US 566 – 608 MHz 503407 ew 365 G3-B-EU 526 – 668 MHz 503408 ew 365 G3-B-US 526 – 668 MHz 503409 ew 365 G3-C-EU 734 –776 MHz 503410 ew 365 G3-C-US 734 –776 MHz 503411 ew 365 G3-D-EU 780 – 822 MHz 503412 ew 365 G3-D-EU-X780 – 822 MHz 503413 ew 365 G3-D-UK 780 – 822 MHz 503414 ew 365 G3-E-EU 823 – 865 MHz 503415 ew 365 G3-E-EU-X823 – 865 MHz 503416 ew 365 G3-E-UK 823 – 865 MHz 503417 ew 365 G3-GB 606 – 648 MHz 504654RECOMMENDED ACCESSORIESCat. No. ME 4-ew – Clip-on microphone,cardioid, black 503156 AM 2 – Antenna Mount kit 009912 CC 3 – System Case 503168L 2015 – Charging unit 009928 BA 2015 – Rechargeable battery pack 009950 ASA 1 – Active antenna splitter 503165 NT 1-1 – plug-in mains unit forASA 1 & L 2015 E U: 503158US: 503873UK: 503874 NT 3-1 – Plug-in mains unit for L 2015 E U: 503159US: 503876UK: 503877 A 1031-U – Antenna 004645A 2003-UHF – Directional Antenna 003658 AB 3 – Antenna booster 505550 Ear Set 1-ew – Ear-worn microphone,omni, black 504232 Ear Set 1-ew-3 – Ear-worn microphone,omni, beige 504237 Ear Set 4-ew – Ear-worn microphone,cardioid, black 504236 Ear Set 4-ew-3 – Ear-worn microphone,cardioid, beige 504234 MKE 1-ew – Clip-on microphone,omni-directional, black 502876 MKE 1-ew-1 – Clip-on microphone,omni, white 502877 MKE 1-ew-2 – Clip-on microphone,omni, brown 502878 MKE 1-ew-3 – Clip-on microphone, beige 502879 MKE 2-ew Gold – Clip-on microphone,omni, black 009831 MKE 2-ew-3 Gold – Clip-on microphone,omni, beige 009832 MKE 40-ew – Clip-on microphone,cardioid, black 500527Cat. No. HSP 4-ew – Headworn microphone,cardioid, black 009864 HSP 4-ew-3 – Headworn microphone,cardioid, beige 009867 HSP 2-ew – Headworn microphone,omni, black 009866 HSP 2-ew-3 – Headworn microphone,omni, beige 009872 CI 1 – Instrument cable 503163ew 335 / ew 345 / ew 365 G3 Vocal SetsMMD 835-1 – evolution microphone head 502575 MMD 845-1 – evolution microphone head 502576 MME 865-1 – evolution microphone head 502581 MZW 1 – Windshield 004839 KEN 2 – Identification rings 530195 LA 2 – Charging adapter forhandheld microphones 503162 CC 3 – System case 503168Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany 0 4 / 1 3 S e n n h e i s e r i s a r e g i s t e r e d t r a d e m a r k o f S e n n h e i s e r e l e c t r o n i c G m b H & C o . K G . w w w . s e n n h e i s e r . c o m . C o p y r i g h t ©0 4 / 2 0 1 3 . A l l r i g h t s r e s e r v e d . E r r o r s a n d o m i s s i o n s e x c e p t e d .Contact your local Service Partner:。
维沙盒连接器说明书
Edgeboard Connectors, Dual Readout, 0.125" (3.17 mm) C-C, Standard and Right Angle TerminalsELECTRICAL SPECIFICATIONSCurrent Rating: 3 ATest Voltage Between Contacts:at sea level: 1500 V RMSAt 70 000 feet (21 336 meters): 325 V RMSInsulation R esistance: 5000 MΩ minimum at 500 V DC potentialContact Resistance: 30 mV maximum at rated current (with gold plating)Operating Temperature: -65 °C to +125 °CHumidity: 96 h at 90 % relative humidity at +40 °C, dried at room temperature for 3 h minimum, insulation resistance was greater than 5000 MΩDurability: after 500 cycles of insertion and withdrawal of a 0.070" (1.78 mm) thick steel test board, contact resistance less than 0.030 V at 3 A on gold plated contacts and individual contact pair separation force when measured with a 0.054" (1.37 mm) thick steel test blade was greater than ½ oz.Shock:three 50G shocks in each of 3 mutually perpendicular planes with no loss of continuityVibration: 2 h in each of 3 mutually perpendicular planes, frequency sweep 10 cps to 55 cps at 0.06 double amplitude with no loss of continuity FEATURES•Grid patterns: 0.125" C-C x 0.150" (3.17 mm x 3.81 mm), 0.125" C-C x 0.200" (3.17 mm x 5.08 mm) and 0.125" C-C x 0.250" (3.17 mm x 6.35 mm)•Standard and right angle terminals•Greater design latitude:body materials: glass-filled polyester and glass-filled polyphenylene sulfide7 contact termination styles - 3 standard, 4 right angle19 body sizes and 6 mounting styles•Selective gold plating•Accepts PC board thickness of 0.054" to 0.071" (1.37 mm to 1.80 mm)•Polarization between contact positions in all sizes. Between contact polarization permits polarizing without loss of contact positionAPPLICATIONSFor use with 0.0625" (1.59 mm) printed circuit boards requiring an edgeboard type connector on 0.125" (3.17 mm) centersMATERIAL SPECIFICATIONSBody Material:“3” thermoplastic polyester, glass-filled, black, flame retardant (UL 94 V-0)”5” thermoplastic polyphenylene sulfied, glass filled, brown, flame retardant (UL 94 V-0)Contacts: phosphor bronze (see Ordering Information) Polarizing Key: glass reinforced nylon, flame retardant (UL 94H-B)Plating: gold (see Ordering Information)ORDERING INFORMATIONEB63K40SG X15MODEL BODYMATERIAL3 = glass-filledpolyester5 = glass-filledpolyphenylenesulfide STANDARDTERMINALVARIATIONSC, D, K,1R, 2R,3R, 4RCONTACTSPER SIDE6, 10, 12,14, 15, 18,22, 24, 25,28, 30, 31,32, 35, 36,40, 43, 44,49, and 50CONTACT PLATINGSG = selective gold plating (0.00003"(0.000762 mm) minimum thick) on contactarea with gold flash on terminal.SGF = selective gold plating (0.000010"(0.000254 mm) minimum thick) on contactarea with gold flash on terminal.All gold plating over 0.00005"(0.00127 mm) minimum nickel underplate.Contact factory for additional platingoptionsMOUNTINGVARIATIONSPOLARIZINGKEY POSITIONSKey(s) are located toright of position(s)designated. Use odd-numbered contact forordering: -1, -3, -5, etc.Required only whenpolarizing keys are to befactory installedNote: to order polarizingkeys individually, specifyModel PK-6PHYSICAL SPECIFICATIONSContact Type: bifurcated cantilever beamNumber of Contacts: 6, 10, 12, 14, 15, 18, 22, 24, 25, 28, 30, 31, 32, 35, 36, 40, 43, 44, 49, and 50 per sideContact Terminal Variation: standard terminalsType “C” - dip solder, 0.025" (0.635 mm) square terminals, 0.175" (4.44 mm) nominal terminal length below standoffs Type “D” - dip solder, 0.025" (0.635 mm) square terminals, 0.115" (2.92 mm) nominal terminal length below standoffs Type “K”- Wire Wrap™, 0.025" (0.635 mm) square terminals, 0.570" (14.48 mm) nominal terminal length below standoffsContact Terminal Variation: right angle terminalsType “1R”- dip solder, 0.025" (0.635 mm) square terminals, 0.120" (3.05 mm) nominal terminal length x 0.150"(3.81 mm) nominal terminal row spacingType “2R”- dip solder, 0.025" (0.635 mm) square terminals, 0.120" (3.05 mm) nominal terminal length x 0.200"(5.08 mm) nominal terminal row spacing Type “3R”- dip solder, 0.025" (0.635 mm) square terminals, 0.180" (4.57 mm) nominal terminal length x 0.150"(3.81 mm) nominal terminal row spacingType “4R” - dip solder, 0.025" (0.635 mm) square terminals, 0.180" (4.57 mm) nominal terminal length x 0.200"(5.08 mm) nominal terminal row spacingContact Spacing: 0.125" (3.17 mm) center to center Contact Terminal R ow Spacing: standard - 0.250"5.08 mm) nominal. Right angle - 0.200" (5.08 mm) nominal and 0.150" (3.81 mm) nominalCard Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm) Card Slot Depth: 0.300" (7.62 mm)Connector Polarization: between contact polarization key(s) are located to the right of the contact position(s) designatedNote•High temperature burn-in, edgeboard connectors, with 0.125"(3.17 mm) center to center are on /doc?36006Legal Disclaimer Notice VishayDisclaimerALL PRODU CT, PRODU CT SPECIFICATIONS AND DATA ARE SU BJECT TO CHANGE WITHOU T NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.© 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED。
威利斯智能系统用户指南说明书
analyzes them.After the first hour, W.I.S. changes to standard hourly measurement cycles.the w.i.s. application1. Makes recommendations to optimise the use of chemicals (e.g. type, dosage);2. Shows trends and variations over time;3. Provides a true understanding of spa water quality;4.Anticipates any changes in spa water quality and notifies you in time.Name of the spa and its water temperatureWater temperatureWeather forecast for the area Daily analysis report and recommendationspHLast measured pH, ORP, conductivityFirmware updatesummaryIntroducing W.I.S. 1Setting the application 5Creating an account 6Initial configuration 7Maintenance 11Precautions for use 14Warranty summary 15Technical characteristics 17Troubleshooting 19setting the application download the application to start the w.i.s. deviceFollow the instructions in the Application step by step.packaging; you will need it for the safe storage of W.I.S. afterremoving it from the water.follow the application’s instructionsOpen the W.I.S. device.Switch ON the W.I.S. device.You may also remove the inner protective cover and then push the button.Use the opening tool to remove the top lid.W.I.S. ready.Be careful! Sensitive area! Make sure that no drops of water enter the inside of the W.I.S. device.W.I.S. ready.closing the w.i.s. deviceput your w.i.s. into the waterturn the bottom cover to the left to remove the protective caps of the sensors. Remove the sensor caps and store them in the original packaging; they will be useful when W.I.S. is winterized.Screw the bottom cover back on before placing W.I.S. in the water.Make sure that the top lid is tightly in place before placing the device back into the water to ensure that W.I.S. is watertight.When placing the top lid on W.I.S., align the notches with thepins.Before initial configuration, follow the Application’s instructions.connecting w.i.s. to the internet Follow the Application’s instructions.create your spaFollow the Application’s instructions.Do you need help? Visit our website:11Push the button for at least 5 seconds until the yellow LED starts to blink.Replacing the sensors.technical characteristicsW.I.S. sensors are patent protected; they are made by multi-component injection moulding. The Twist&Lock system makes replacing the sensors easier. The orange sensor measures the ORP (Redox). The grey sensor measures water conductivity. The blue sensor measures the pH value.switching off the w.i.s. device.Before starting any maintenance, switch OFF the W.I.S. device.12Do you need help? Visit our website:It is recommended that the 3 sensors (orange, grey, blue) are cleaned once a month. Take W.I.S. out of the water, remove the protective cover and clean the sensors with a damp, non-abrasive cloth. Replace the protective cover on W.I.S., and simply drop W.I.S. back into the spa.charging the w.i.s. deviceIndicator lightThe indicator light located under the lid of the W.I.S. device displays the status of W.I.S.Push the button for 5 seconds: My W.I.S. blinks green three times: W.I.S. is switching on. My W.I.S. blinks yellow once: W.I.S. is switching off.Long life batteryUSB cable and charger included.Charge your W.I.S. for a minimum of 6 hoursT u r n e d o nT u r n e d o ffDo you need help? Visit our website: 13forced into place. Check whether the connector is compatible with the socket and try again.for any data loss. Contact us for assistance at www.in case your device needs servicing (ex-14Do you need help? Visit our website:This warranty (…Warranty”) applies to all countries in which the W.I.S. product (…Product”) has been sold on the market by Wellis or an authorised retailer. Wellis warrants that, at the time of its original pur-chase, the Product is free from defects in material, design and workmanship subject to the following terms and conditions:The Warranty applies to the product’s end-purchaser (the “Customer”). In no way does the Warranty limit the rights of the Customer under the mandatory pro-visions of applicable national law, nor does it limit the rights of the Customer as outlined in his/her contract with the Product retailer/distributor.The Warranty is valid provided that the Customer presents the Product with the original proof of pur-chase, such as an invoice, receipt, sales slip, war-ranty certificate issued by an authorised retailer accompanied by a sales slip, or proof of credit card payment if the purchase took place over the Inter-net. The proof of purchase must contain the date of purchase, a precise description of the Product and, if applicable, the name of the authorised retailer and the serial number. In the event that the aforemen-tioned documents cannot be presented, or that the information required is incomplete or illegible, Wellis reserves the right to freely deny the Warranty.The Warranty is only valid if the Product was em-ployed for personal use. It does not cover profes-sional use or Products rented out for commercial purposes.The Warranty Period is valid for a maximum of 2 (TWO) YEARS from the date the first Customer pur-chased the Product from Wellis or an authorised re-tailer (…Warranty Period”).During the Warranty Period, Wellis shall repair or re-place the defective Product free of charge, at its sole discretion and within the limits of available stock. Wellis shall return the repaired Product, or another Product in good working condition to the Customer. All parts or materials that have been replaced will become the property of Wellis.The Warranty Period of a repaired or replaced Prod-uct will not be extended or renewed.The Warranty applies to defects that arise when us-ing the Product in accordance with the Installation and Use Guide. It does not cover Product mainte-nance, repairs, or part replacement due to normal wear and tear or ageing. Furthermore, the Warranty is invalid if:furthermore, the warranty is invalid if:The defect is attributable to the Product being: used in a manner that is inconsistent with the installa-tion and use guide, subjected to rough treatment, extreme heat or environmental conditions, or rapid environmental or temperature changes, exposed to corrosion, oxidation, or unauthorised modifications and/or connections, subjected to repairs made by unauthorised personnel or by the Customer, subject-ed to repairs made with unauthorised replacement parts, improperly used or used while connected to an inappropriate power supply, exposed to an accident or forces of nature, used in a spa with untreated wa-ter, exposed to chemicals or subjected to any other act beyond the reasonable control of Wellis,The Customer does not inform Wellis or the author-ised Product retailer of the defect within thirty (30) days of its appearance during the Warranty Period;The Product is not returned to Wellis or the author-ised Product retailer within sixty (60) days of the de-fect’s appearance during the Warranty Period;The Product series or identification number has been removed, deleted, damaged, altered or rendered il-legible;The Product series or identification number has been removed, deleted, damaged, altered or rendered il-legible;The defect is the result of the Product being used with an accessory that is not manufactured or sup-plied by Wellis.Do you need help? Visit our website: 15The application gives dosages or tips for informa-tional purposes only. Wellis cannot be held liablewith regard to the information given. The Applicationuser remains the sole decision-maker with regard tothe chemicals added to his swimming spa, and to itsmanagement.The Customer agrees to return the Product in itsoriginal packaging. Wellis is not responsible for anyProduct damage that occurs during transport due toinappropriate packaging.Wellis reserves the right to request a flat-rate feefrom the Customer to cover the cost of shipping andhandling.This Warranty constitutes the sole and exclusivelegal remedy of the Client against Wellis, and Wel-lis’s sole and exclusive liability to the Customer interms of defective Products. This Warranty replacesall other warranties and guarantees, whether oral,written, legal (except for those that are mandatory),contractual, quasi-delict, or otherwise. Wellis is notliable for incidental or consequential damages or ex-penses. Any modification to the Warranty requiresthe prior written consent of Wellis. The Warranty issubject to French law, insofar and to the extent thatthe peremptory norms of the law of domicile or ofthe Customer’s head office do not provide otherwise.16Do you need help? Visit our website:Do you need help? Visit our website: 1718Do you need help? Visit our website:Do you need help? Visit our website: 19u s e r g u i d e-2021。
ews控制器连接rosslare keypad 说明书
Connecting Rosslare keypad to EWS Controllerv .b 1APPLICATION NOTEThe Keypad is compatible with EWS controller with small limitations1. COMPATIBILITY2. HOW TO SET THE KEYPAD AND THE EWS CONTROLLER2.1 HOW TO SET PIN CODE AND CARD (DOUBLE SECURITY)The keypad can work with EWS in these modes: 1. PIN code OR Card 2. PIN Code AND Card 3. CARD only1. PIN code AND card (double security) works perfectly well.2. PIN code OR card works fine with these limitations:The PIN code can be up to 5 digits.If in the same installation, there are Proximity readers and Rosslare keypad, the Pin code must be put as different User. That means, if the User has card with Number 5349221, the PIN code cannot be that number. It must be bellow 65535 and must be registered as different User. In other words, in mixed network (prox. readers and keypads) the door can be opened without problem but for 1person we have to have 2 users like: John Smith1 and John Smith2. Where John Smith1 as ID has the Card Number and John Smith2 as ID has the PIN code. This applies to all third party controllers. The keypad is made like that.3. Card only works perfectly well.The keypad can be set to give output for PIN codes that is not recognizable by EWS. In that way the EWS will receive just the cards.Connection:Default settings of Rosslare AYC-Q64B kepadWire Rosslare AYC-Q64B EWS Terminal blockWhiteD1GreenD0Red+12V Black GND•By default, for both the Rosslare keypad and the EWS controller:1. The card works good and the correct number is presented on the PROS event window.2. The PIN code does not work. The keypad must be set.•In the keypad:1. Press ####2. Press 12343. Press 14. Press 5These are settings for the keypad described on page 15, 16 of AYC-Q64B Instruction manual, “Selecting Keypad Transmission Format”, “Option5: “1 to 5 Keys + facility Code, 26-Bit Wiegand””1. Press ####2. Press 12343. Press 24. Press 3These are settings for the keypad described on page 21, 22 of AYC-Q64B Instruction manual, “Selecting Prox. Card Transmission Format”, “Option3: Wiegand card+PIN”•In the PROS software:Go to Reader/Properties. For Reader Type select “LCSP”, for Entry Mode select “Keycode and Card” as presented on the picture bellow.The user settings must contain User ID(Card Number) and Keycode (PIN code).If all the settings are done, present the card with number 5349221 and the keypad will start to blink awaiting for the PIN Code. Then press 00321 (or 321#) and Access will be granted.Note: The PIN Code cannot be 00000.•In the PROS software:For the Reader leave the default settings (proximity reader).2.2 HOW TO SET PIN CODE OR CARD•In the keypad:1. Press ####2. Press 12343. Press 14. Press 5With these settings PIN codes that can be used : 1 up to 65535For 1 to 4 Digit codes (1 to 9999), “#” must be applied in the end the code to be sent. 5 digit codes are sent directly.In Users, create 2 users (John Smith1 and John Smith2).In the field User ID for John Smith1 put the card number.In the field User ID for John Smith2 put the PIN Code (must be smaller than 65535).All product specifications are subject to change without notice.If all the settings are done, present the card with number 5349221 and the user John Smith1 will be granted access.Type the Pin Code 54321 and the user John Smith2 will be granted access.2.3 HOW TO SET CARD ONLY•In the PROS software:For the Reader leave the default settings (proximity reader).•In the keypad:1. Press ####2. Press 12343. Press 14. Press 1These are settings for the keypad described on page 15, 16 of AYC-Q64B Instruction manual, “Selecting Keypad Transmission Format”, “Option1: Single Key, 6-bit Wiegand (Rosslare Format)”。
EWSA中文破解版使用教程.docx
EWSA暴力绿色中文完美P解版使用教程笔者：青夜子QQ: 2725736591.打开文件查看CPU和GPU2.点击自动检测就好了3•查看GPU⅝λ} ElCUaSQft f 1 rSCVtirι<y AIidit Ur文忡⅛⅛J * φ∕⅛fi蠢& 罠云妙 制非*Ξτ^6ι <∑flrTOg 应 4^⅝Ξ⅞ ⅞ t⅛sS U r ISBaW IV*Λ2Γ :7FU0¾tJ⅛CutlIC尋钿字興：∙[H⅜⅜时同2⅛ KiilS ： ≡¾∕3⅛ ；■5P1fi⅛⅛两Ctrl+GIfi 銀手宾堰顶Ctrl+I55Dgsr⅛a 吏 ⅛ws 顶Ctrl+»i 甲论日吉记5⅛J⅛血 CtrltLrfTftl4•选择后点击OK13:55:42 Fd⅛υ∙y 20, 2012 13 55:42 FdXUWy 20j Ξ012 □=≡∣4Sf⅛t∏j⅛V2D>ΛC ,PB∏r<□ gπ∏Bra ∣ Dpbtjnf EnterT*g attac>. OPtIon 5 如西 <>ρe∏figGRJ 口PtiaM d4k ∣⅞ ∈∣宀5.正式进入破解，点击导入数据，出现下拉菜单栏，选择“导入AP目标数据文件”6•选择已经获取到的有效CaP握手包打开7•在握手包内选择有效的，点击OK8•点击选项，出现下拉菜单，选择新建字典选项V√ft∫l9•点击添加，选择下载到或自制的字典选择下载到或自制的字典⅛fi⅛⅛t⅛莖的艾也⅛p<yi Jt,gγ t7iγ⅛r -dl i st Tlr 」Jt⅛⅛⅛nl⅛jcj ir ^i ⅛r.ftζrdl≡ ≡l ..:JE.τr⅛=P 念 JfR 二口揃罕巾K^Ce ：. La'⅛ΓA 1E⅛M 7-⅛腔能苦1藻転毎M 件容证】：V⅛⅛⅛f ⑴- 麺丈虻O 乔"W t tf f)5 A rτ □IDi-卓面两上郤圧順曲却FJfEZΓj ⅛⅛1.7H0趕坍罕R txt 3 41⅛. UI⅞ ⅛t⅛⅛T⅛.ι∑t■1 I 打F ①1 V _ I>t ∣uu⅛⅛ I -WU⅞r> JiU tj⅞ef ∣ngClCtIanAry dιao⅞寸-TfrTl10.选择后点OK 也J!聲处 * ：：D MrS I]≤ ιtt⅛44 f⅛b r uary ≥0 i□lZ ClPerjng ICiCtian⅞r> OPdClnC ]i ILti 44 S"⅛i>-uary 2'J.bΠ⅛Nng□Eon3"日Kiog11.选择GaP后，点击开始攻击12.出现以下界面WPA 跟WPA2 的破解比较困难，基本上就是碰运气，如果下载的字典破解不出来，最好自己制作字典，根据地方手机号码，邮政编码，电话号码，年龄阶段的生日，姓氏加以上的号码。
Omega Serie EWSA 气体温度传感器说明书
Serie EWSATransmisores y sensores de temperatura impermeables y resistentesHOJA DEM5732/0119INSTRUCCIONESCompreenlíe-mail:**************Para obtener los manuales más recientes de productos: 1.0 DescripciónLos sensores de temperatura del aire EWSA están diseñadospara montaje en pared o en tuberías en entornos hostiles tantointeriores como exteriores.Una sonda RTD de 6 mm de diámetro con un resistenterecubrimiento, está encapsulada en el centro de un tubo deprotección exterior de 12,7 mm de diámetro. El bloque de terminalesdel sensor RTD o el transmisor opcional están integrados en elinterior de una carcasa resistente de aleación de aluminio con índicede clasificación IP65.En el lado izquierdo de la carcasa hay un casquillo para cableM20, compatible con cables de 2,5 a 6,5 mm de diámetro.2.0 Recepción y desembalajeExamine el embalaje y el sensor minuciosamente para ver si hayseñales de daños debido al transporte. Si detecta alguno,notifíqueselo al servicio de atención al cliente de Omega.3.0 EspecificacionesDimensiones:Caja: 80 An. X 75 Al. X 58 P. (mm)Sensores: 75 mm de longitud x 12,7 mm de DEEntrada de cable: casquillo M20 para cable de 2,5 a 6,5 mm de DE 4.0 Instalación mecánicaEl EWSA se ha diseñado para montaje en pared o en tubería. Los puntos de taladrado para la fijación en la pared se indican en la base de la carcasa.Modelo solo sensor EWSA-Pt100:Tipo de sensor:- Pt100 clase A estándar de 4 cables- Pt1000 previa solicitudRango de temperatura ambiente:- De 50 a 100 °CConexión eléctrica:Bloque de terminalesroscadosEWSA-Pt100-TX:Rango de temperatura ambiente:De -40 a 85 °C de 10 a 90 % HR sin condensación Escala estándar del transmisor:4 mA a -25 °C, 20 mA a 75 °CConexión eléctrica:Terminales roscados, 2 hilosAlimentación:De 10 a 30 V CC, alimentación por circuitoCarga de salida máxima:[(V alimentación-10)/20] KΩ. Por ejemplo: 700Ω a 24 V 5.0 Instalación eléctricaPara el sensor de temperatura EWSA-Pt100-TX con transmisor, consulte el manual del transmisor M4561 para obtener información sobre el cableado y el ajuste de la señal de salida. El modelo EWSA-Pt100 estándar dispone de un bloque de terminales roscados de 4 vías para conectarse al sensor Pt100 de 4 cables.Pt100 **************EE. UU.Servicio en Norteamérica: Omega Engineering, Inc.Sede central: Número gratuito: 1-800-826-6342 (solo EE. UU. yCanadá)Atención al cliente: 1-800-622-2378 (solo EE. UU. y Canadá)Servicio de ingeniería: 1-800-872-9436 (solo EE. UU. y Canadá)Tel.: (203) 359-1660Fax: (203) 359-7700Correoelectrónico:**************Para conocer otros centros, visite /worldwideLa información que contiene este documento se considera correcta, pero OMEGA no acepta ningún tipo de responsabilidad por los errores que pueda contener y se reserva el derecho a modificar las especificaciones sin previo aviso.GARANTÍA/EXENCIÓN DE RESPONSABILIDADESOMEGA ENGINEERING, INC. garantiza que esta unidad no contiene defectos de materiales ni de fabricación durante un periodo de 13 meses desde la fecha de compra. La GARANTÍA de OMEGA añade un periodo de gracia adicional de un (1) mes a la garantía de producto habitual de un (1) año para cubrir el tiempo de manipulación y envío. De este modo se garantiza que los clientes de OMEGA reciban la máxima cobertura en cada producto.Si la unidad no funciona correctamente, debe devolverse a fábrica para su evaluación. El departamento de atención al cliente de OMEGA emitirá una devolución autorizada (AR) inmediatamente después de la solicitud telefónica o por escrito. Una vez que la haya examinado OMEGA, si se determina que la unidad es defectuosa, se reparará o sustituirá de forma gratuita. La GARANTÍA de OMEGA no se aplica a los defectos derivados de cualquier acción del comprador, incluidos, entre otros, la manipulación inadecuada, la conexión incorrecta, el funcionamiento fuera de los límites del diseño, una reparación inadecuada o la modificación no autorizada. Esta GARANTÍA será NULA si la unidad muestra signos de haber sido modificada o de haber sufrido daños como consecuencia de una corrosión excesiva; una corriente, un calor, una humedad o unas vibraciones excesivas; unas especificaciones inadecuadas; una aplicación incorrecta; un uso indebido u otras condiciones de funcionamiento fuera del control de OMEGA. Los componentes cuyo desgaste no está cubierto por la garantía incluyen, entre otros, los puntos de contacto, los fusibles y los triacs.OMEGA ofrece sugerencias sobre el uso de sus productos. Sin embargo, OMEGA no asume responsabilidad alguna por los errores u omisiones, ni por los daños que resulten del uso de sus productos de acuerdo con la información proporcionada por OMEGA, ya sea verbal o escrita. OMEGA solo garantiza que las piezas fabricadas por la compañía se ajustarán a las especificaciones y no tendrán defectos. OMEGA NO OFRECE NINGUNA OTRA GARANTÍA O REPRESENTACIÓN DE NINGÚN TIPO, EXPRESA O IMPLÍCITA, EXCEPTO LA DE TITULARIDAD, Y MEDIANTE EL PRESENTE DOCUMENTO SE EXPRESA LA RENUNCIA A TODAS LAS GARANTÍAS IMPLÍCITAS, INCLUIDAS LAS DE COMERCIALIZACIÓN Y ADECUACIÓN PARA UN FIN DETERMINADO. LIMITACIÓN DE RESPONSABILIDAD: las compensaciones del comprador establecidas en este documento son exclusivas, y la responsabilidad total de OMEGA con respecto a este pedido, tanto si se basa en contrato como garantía, negligencia, indemnización, responsabilidad estricta o de otro modo, no excederá el precio de compra del componente en el que se basa la responsabilidad. En ningún caso será OMEGA responsable de daños consecuentes, incidentales o especiales. CONDICIONES: el equipo vendido por OMEGA no está diseñado para utilizarse, ni tampoco se puede utilizar: (1) como un “componente básico” conforme a 10 CFR 21 (NRC), utilizado en o con cualquier instalación o actividad nuclear; o (2) en aplicaciones médic as ni en seres humanos. En caso de que cualquier producto se utilice en o con cualquier instalación o actividad nuclear, aplicación médica o en seres humanos, o de que se utilice indebidamente de cualquier otra forma, OMEGA no asumirá ninguna responsabilidad según se establece en nuestra GARANTÍA/EXENCIÓN DE RESPONSABILIDADES básica; además, el comprador indemnizará a OMEGA y exonerará a OMEGA de cualquier tipo de responsabilidad o daño derivado del uso del producto o productos de dicha forma.SOLICITUDES/CONSULTAS DE DEVOLUCIÓNDirija todas las solicitudes y consultas de garantía y reparación al departamento de servicio de atención al cliente de OMEGA. ANTES DE DEVOLVER ALGÚN PRODUCTO A OMEGA, EL COMPRADOR DEBE OBTENER UN NÚMERO DE DEVOLUCIÓN AUTORIZADA (AR) DEL SERVICIO DE ATENCIÓN AL CLIENTE DE OMEGA (CON EL FIN DE EVITAR RETRASOS DE PROCESAMIENTO). El número AR asignado se debe marcar en la parte exterior del paquete de devolución y añadir a cualquier correspondencia.El comprador es responsable de los gastos de envío, del transporte, de los seguros y del correcto empaquetado para evitar roturas entránsito.PARA SOLICITAR DEVOLUCIONES EN GARANTÍA, tenga a mano la siguiente información ANTES de ponerse en contacto con OMEGA:1. Número de pedido con el que se COMPRÓel producto, 2. modelo y número de serie del producto en garantía e3. instrucciones de reparación o problemas específicos enrelación con el producto.PARA SOLICITAR REPARACIONES FUERA DE GARANTÍA, consulte en OMEGA la información sobre los gastos de reparación actualizados. Tenga a mano la siguiente información ANTES de ponerse en contacto con OMEGA: 1. Número de pedido para cubrir el COSTE de la reparación,2. modelo y número de serie del producto e3. instrucciones de reparación o problemas específicos en relación con el producto.La política de OMEGA es hacer cambios de actualización y no cambios de modelo, siempre que sea posible una mejora. Esto proporciona a nuestros clientes lo último en tecnología e ingeniería. OMEGA es una marca comercial de OMEGA ENGINEERING, INC.© Copyright 2019 OMEGA ENGINEERING, INC. Reservados todos los derechos. Este documento no se puede copiar, fotocopiar, reproducir, traducir ni reducir a ningún soporte electrónico o formato legible por máquina, de manera total o parcial, sin el consentimiento previo por escrito de OMEGA ENGINEERING, INC.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
EWSA使用说明
以我手头的版本EWSA5.2为例。
解压后，双击EWSA.exe图标，弹出以下窗口：
等15秒后OK按钮从灰色变为白色，点击OK，弹出EWSA窗口：
Options---Languange---简体中文`（先决条件在EWSA.exe所在目录中有“简体中文.lan”文件），
EWSA窗口的菜单变为中文：
帮助---输入注册码，
把注册码输入或拷贝进填充区（注册码在文件key.txt中），完成注册。
接着设置CPU和GPU（显卡）：选项----CPU选项和选项---GPU选项，也没有什么可以选的，OK就是了。
接着设置字典文件：选项----攻击选项，出现“一般设置“窗口
先点击窗口左下的”密码突变选项“，把钩钩全去掉，否则跑起来时间加长许多。
接着点击窗口右上的”新增“按钮，弹出文件管理窗口，选择字典文件。
可以输入多个字典文件：
点击上图右下的”打开“按钮，选中的字典文件输入到EWSA中：
在上图中字典文件前的方形单选框决定该文件是否使用。
点击下面的”确定“按钮，就把字典文件搞定。
在跑包中，窗口中选中的字典将逐个运行。
接着输入握手包文件，点击下图左上第二排的”导入数“，选”导入Tpcdump文件“选项：文件管理窗口弹出。
找到要破解的握手包文件：
点击上面口窗口右下的”打开“按钮。
可能会出现以下窗口：
OK，握手包输入完成：
现在可以运行EWSA了，运行EWSA叫“跑字典“。
点击EWSA窗口上面第二排的图标”开始测“的选项”字典穷举攻击“，跑字典开始：
跑字典所需的时间取决于字典的大小和电脑CPU和GPU的速度。
最后能不能得到密码？不一定！这取决于密码的复杂程度，字典大小，电脑的速度。
例如，对于1G的字典，一般的家庭电脑可能要用4小时。
过去在淘宝有专门跑字典的商家，他们使用速度很快的电脑组和75G的字典，20分钟就能跑完，跑出密码收10元。
如跑不出密码，这个握手包就叫做”金刚包“，可以用250G的字典，先收5元电费，得到密码再收30元。
现在跑字典的商家隐蔽起来了，但还可以找到，主要是在QQ群中找，在百度也能找到。
附注：
一、EWSA (全称是: Elcomsoft Wireless Security Auditor) 由俄罗斯安全公司Elcomsoft 出品。
该软件特点是：利用GPU的运算性能快速攻破无线网络WPA-PSK及WPA2-PSK密码，运算速度相比单独使用CPU可提高最多上百倍。
二、支持的显卡
1、NVIDIA显卡
GeForce 8, 9, 200 Series及更高版本 (至少256MB显存)、Quadro FX 4600以后推出的专业绘图卡、TESLA C870,D870,S870,C1060,S1070
需要特别注意的是GeForce 8xxx以后所推出的绘图卡须安装CUDA 182.22以后版本的驱动程序。
2、ATI显卡
RADEON HD 3000 Series、RADEON HD 4600 Series、RADEON HD 4800 Series及更高版本、FireStream 9170,9250,9270 FireStream 9170,9250,9270 和N卡一样要注意的是Radeon 3xxx以后所推出的绘图卡须安装CATALYST 9.2以后版本的驱动程序。
三、运行EWSACPU和显卡温度很高，是否要监视温度，防止烧坏电脑？我回答不了这个问题。
我用了小鲁温度计，CPU的温度一直在98度到100度之间。