The Basics Of Tariffs And Trade Barriers
I_E_11e_Ch_04

CHAPTER 4—TARIFFSMULTIPLE CHOICE1. The imposition of tariffs on imports results in deadweight welfare losses for the home economy.These losses consist of the:a. Protective effect plus consumption effectb. Redistribution effect plus revenue effectc. Revenue effect plus protective effectd. Consumption effect plus redistribution effectANS: A PTS: 12. Suppose that the United States eliminates its tariff on steel imports, permitting foreign-producedsteel to enter the U.S. market. Steel prices to U.S. consumers would be expected to:a. Increase, and the foreign demand for U.S. exports would increaseb. Decrease, and the foreign demand for U.S. exports would increasec. Increase, and the foreign demand for U.S. exports would decreased. Decrease, and the foreign demand for U.S. exports would decreaseANS: B PTS: 13. A $100 specific tariff provides home producers more protection from foreign competition when:a. The home market buys cheaper products rather than expensive productsb. It is applied to a commodity with many grade variationsc. The home demand for a good is elastic with respect to price changesd. It is levied on manufactured goods rather than primary productsANS: A PTS: 14. A lower tariff on imported aluminum would most likely benefit:a. Foreign producers at the expense of domestic consumersb. Domestic manufacturers of aluminumc. Domestic consumers of aluminumd. Workers in the domestic aluminum industryANS: C PTS: 15. When a government allows raw materials and other intermediate products to enter a country dutyfree, its tariff policy generally results in a:a. Effective tariff rate less than the nominal tariff rateb. Nominal tariff rate less than the effective tariff ratec. Rise in both nominal and effective tariff ratesd. Fall in both nominal and effective tariff ratesANS: B PTS: 16. Of the many arguments in favor of tariffs, the one that has enjoyed the most significant economicjustification has been the:a. Infant industry argumentb. Cheap foreign labor argumentc. Balance of payments argumentd. Domestic living standard argumentANS: A PTS: 17. The redistribution effect of an import tariff is the transfer of income from the domestic:a. Producers to domestic buyers of the goodb. Buyers to domestic producers of the goodc. Buyers to the domestic governmentd. Government to the domestic buyersANS: B PTS: 18. Which of the following is true concerning a specific tariff?a. It is exclusively used by the U.S. in its tariff schedules.b. It refers to a flat percentage duty applied to a good's market value.c. It is plagued by problems associated with assessing import product values.d. It affords less protection to home producers during eras of rising prices.ANS: D PTS: 19. The principal benefit of tariff protection goes to:a. Domestic consumers of the good producedb. Domestic producers of the good producedc. Foreign producers of the good producedd. Foreign consumers of the good producedANS: B PTS: 110. Which of the following policies permits a specified quantity of goods to be imported at one tariffrate and applies a higher tariff rate to imports above this quantity?a. Tariff quotab. Import tariffc. Specific tariffd. Ad valorem tariffANS: A PTS: 111. Assume the United States adopts a tariff quota on steel in which the quota is set at 2 million tons,the within-quota tariff rate equals 5 percent, and the over-quota tariff rate equals 10 percent.Suppose the U.S. imports 1 million tons of steel. The resulting revenue effect of the tariff quota would accrue to:a. The U.S. government onlyb. U.S. importing companies onlyc. Foreign exporting companies onlyd. The U.S. government and either U.S. importers or foreign exportersANS: A PTS: 112. When the production of a commodity does not utilize imported inputs, the effective tariff rate onthe commodity:a. Exceeds the nominal tariff rate on the commodityb. Equals the nominal tariff rate on the commodityc. Is less than the nominal tariff rate on the commodityd. None of the aboveANS: B PTS: 113. Developing nations often maintain that industrial countries permit raw materials to be importedat very low tariff rates while maintaining high tariff rates on manufactured imports. Which of the following refers to the above statement?a. Tariff-quota effectb. Nominal tariff effectc. Tariff escalation effectd. Protective tariff effectANS: C PTS: 114. Should the home country be "large" relative to the world, its imposition of a tariff on importswould lead to an increase in domestic welfare if the terms-of-trade effect exceeds the sum of the:a. Revenue effect plus redistribution effectb. Protective effect plus revenue effectc. Consumption effect plus redistribution effectd. Protective effect plus consumption effectANS: D PTS: 115. Should Canada impose a tariff on imports, one would expect Canada's:a. Terms of trade to improve and volume of trade to decreaseb. Terms of trade to worsen and volume of trade to decreasec. Terms of trade to improve and volume of trade to increased. Terms of trade to worsen and volume of trade to increaseANS: A PTS: 116. A beggar-thy-neighbor policy is the imposition of:a. Free trade to increase domestic productivityb. Trade barriers to increase domestic demand and employmentc. Import tariffs to curb domestic inflationd. Revenue tariffs to make products cheaper for domestic consumersANS: B PTS: 117. A problem encountered when implementing an "infant industry" tariff is that:a. Domestic consumers will purchase the foreign good regardless of the tariffb. Political pressure may prevent the tariff's removal when the industry maturesc. Most industries require tariff protection when they are matured. Labor unions will capture the protective effect in higher wagesANS: B PTS: 118. Tariffs are not defended on the ground that they:a. Improve the terms of trade of foreign nationsb. Protect jobs and reduce unemploymentc. Promote growth and development of young industriesd. Prevent overdependence of a country on only a few industriesANS: A PTS: 119. The deadweight loss of a tariff:a. Is a social loss since it promotes inefficient productionb. Is a social loss since it reduces the revenue for the governmentc. Is not a social loss because society as a whole doesn't pay for the lossd. Is not a social loss since only business firms suffer revenue lossesANS: A PTS: 120. Which of the following is a fixed percentage of the value of an imported product as it enters thecountry?a. Specific tariffb. Ad valorem tariffc. Nominal tariffd. Effective tariffANS: B PTS: 121. A tax of 20 cents per unit of imported cheese would be an example of:a. Compound tariffb. Effective tariffc. Ad valorem tariffd. Specific tariffANS: D PTS: 122. A tax of 15 percent per imported item would be an example of:a. Ad valorem tariffb. Specific tariffc. Effective tariffd. Compound tariffANS: A PTS: 123. Which type of tariff is not used by the American government?a. Import tariffb. Export tariffc. Specific tariffd. Ad valorem tariffANS: B PTS: 124. Which trade policy results in the government levying a "two-tier" tariff on imported goods?a. Tariff quotab. Nominal tariffc. Effective tariffd. Revenue tariffANS: A PTS: 125. If we consider the impact on both consumers and producers, then protection of the steel industryis:a. In the interest of the United States as a whole, but not in the interest of the state ofPennsylvaniab. In the interest of the United States as a whole and in the interest of the state of Pennsylvaniac. Not in the interest of the United States as a whole, but it might be in the interest of the stateof Pennsylvaniad. Not in the interest of the United States as a whole, nor in the interest of the state ofPennsylvaniaANS: C PTS: 126. If I purchase a stereo from South Korea, I obtain the stereo and South Korea obtains the dollars.But if I purchase a stereo produced in the United States, I obtain the stereo and the dollars remain in America. This line of reasoning is:a. Valid for stereos, but not for most products imported by the United Statesb. Valid for most products imported by the United States, but not for stereosc. Deceptive since Koreans eventually spend the dollars on U.S. goodsd. Deceptive since the dollars spent on a stereo built in the United States eventually wind upoverseasANS: C PTS: 127. The most vocal political pressure for tariffs is generally made by:a. Consumers lobbying for export tariffsb. Consumers lobbying for import tariffsc. Producers lobbying for export tariffsd. Producers lobbying for import tariffsANS: D PTS: 128. If we consider the interests of both consumers and producers, then a policy of tariff reduction inthe U.S. auto industry is:a. In the interest of the United States as a whole, but not in the interest of auto-producing statesb. In the interest of the United States as a whole, and in the interest of auto-producing statesc. Not in the interest of the United States as a whole, nor in the interest of auto-producingstatesd. Not in the interest of the United States as a whole, but is in the interest of auto-producingstatesANS: A PTS: 129. Free traders point out that:a. There is usually an efficiency gain from having tariffsb. There is usually an efficiency loss from having tariffsc. Producers lose from tariffs at the expense of consumersd. Producers lose from tariffs at the expense of the governmentANS: B PTS: 130. A decrease in the import tariff will result in:a. An increase in imports but a decrease in domestic productionb. A decrease in imports but an increase in domestic productionc. An increase in price but a decrease in quantity purchasedd. A decrease in price and a decrease in quantity purchasedANS: A PTS: 1Figure 4.1 illustrates the demand and supply schedules for pocket calculators in Mexico, a "small" nation that is unable to affect the world price.Figure 4.1. Import Tariff Levied by a "Small" Country31. Consider Figure 4.1. In the absence of trade, Mexico produces and consumes:a. 10 calculatorsb. 40 calculatorsc. 60 calculatorsd. 80 calculatorsANS: C PTS: 132. Consider Figure 4.1. In the absence of trade, Mexico's producer surplus and consumer surplusrespectively equal:a. $120, $240b. $180, $180c. $180, $320d. $240, $240ANS: B PTS: 133. Consider Figure 4.1. With free trade, Mexico imports:a. 40 calculatorsb. 60 calculatorsc. 80 calculatorsd. 100 calculatorsANS: D PTS: 134. Consider Figure 4.1. With free trade, the total value of Mexico's imports equal:a. $220b. $260c. $290d. $300ANS: D PTS: 135. Consider Figure 4.1. With free trade, Mexico's producer surplus and consumer surplusrespectively equal:a. $5, $605b. $25, $380c. $45, $250d. $85, $195ANS: A PTS: 136. Consider Figure 4.1. With a per-unit tariff of $3, the quantity of imports decreases to:a. 20 calculatorsb. 40 calculatorsc. 50 calculatorsd. 70 calculatorsANS: B PTS: 137. According to Figure 4.1, the loss in Mexican consumer surplus due to the tariff equals:a. $225b. $265c. $285d. $325ANS: C PTS: 138. According to Figure 4.1, the tariff results in the Mexican government collecting:a. $100b. $120c. $140d. $160ANS: B PTS: 139. According to Figure 4.1, Mexican manufacturers gain ____ because of the tariff.a. $75b. $85c. $95d. $105ANS: A PTS: 140. According to Figure 4.1, the deadweight cost of the tariff totals:a. $60b. $70c. $80d. $90ANS: D PTS: 141. Consider Figure 4.1. The tariff would be prohibitive (i.e., eliminate imports) if it equaled:a. $2b. $3c. $4d. $5ANS: D PTS: 1Assume the United States is a large consumer of steel that is able to influence the world price. Its demand and supply schedules are respectively denoted by D U.S. and S U.S. in Figure 4.2. Theoverall (United States plus world) supply schedule of steel is denoted by S U.S.+W.Figure 4.2. Import Tariff Levied by a "Large" Country42. Consider Figure 4.2. With free trade, the United States achieves market equilibrium at a price of$____. At this price, ____ tons of steel are produced by U.S. firms, ____ tons are bought by U.S.buyers, and ____ tons are imported.a. $450, 5 tons, 60 tons, 55 tonsb. $475, 10 tons, 50 tons, 40 tonsc. $525, 5 tons, 60 tons, 55 tonsd. $630, 30 tons, 30 tons, 0 tonsANS: B PTS: 143. Consider Figure 4.2. Suppose the United States imposes a tariff of $100 on each ton of steelimported. With the tariff, the price of steel rises to $____ and imports fall to ____ tons.a. $550, 20 tonsb. $550, 30 tonsc. $575, 20 tonsd. $575, 30 tonsANS: A PTS: 144. Consider Figure 4.2. Of the $100 tariff, $____ is passed on to the U.S. consumer via a higherprice, while $____ is borne by the foreign exporter; the U.S. terms of trade:a. $25, $75, improveb. $25, $75, worsenc. $75, $25, improved. $75, $25, worsenANS: C PTS: 145. Referring to Figure 4.2, the tariff's deadweight welfare loss to the United States totals:a. $450b. $550c. $650d. $750ANS: D PTS: 146. According to Figure 4.2, the tariff's terms-of-trade effect equals:a. $300b. $400c. $500d. $600ANS: C PTS: 147. According to Figure 4.2, the tariff leads to the overall welfare of the United States:a. Rising by $250b. Rising by $500c. Falling by $250d. Falling by $500ANS: C PTS: 148. Suppose that the production of $500,000 worth of steel in the United States requires $100,000worth of iron ore. The U.S. nominal tariff rates for importing these goods are 15 percent for steel and 5 percent for iron ore. Given this information, the effective rate of protection for the U.S.steel industry is approximately:a. 6 percentb. 12 percentc. 18 percentd. 24 percentANS: C PTS: 149. Suppose that the production of a $30,000 automobile in Canada requires $10,000 worth of steel.The Canadian nominal tariff rates for importing these goods are 25 percent for automobiles and10 percent for steel. Given this information, the effective rate of protection for the Canadianautomobile industry is approximately:a. 15 percentb. 32 percentc. 48 percentd. 67 percentANS: B PTS: 1Exhibit 4.1Assume that the United States imports automobiles from South Korea at a price of $20,000 per vehicle and that these vehicles are subject to an import tariff of 20 percent. Also assume that U.S.components are used in the vehicles assembled by South Korea and that these components have a value of $10,000.50. Refer to Exhibit 4.1. In the absence of the Offshore Assembly Provision of U.S. tariff policy, theprice of an imported vehicle to the U.S. consumer after the tariff has been levied is:a. $22,000b. $23,000c. $24,000d. $25,000ANS: C PTS: 151. Refer to Exhibit 4.1. Under the Offshore Assembly Provision of U.S. tariff policy, the price of animported vehicle to the U.S. consumer after the tariff has been levied is:a. $22,000b. $23,000c. $24,000d. $25,000ANS: A PTS: 152. Suppose an importer of steel is required to pay a tariff of $20 per ton plus 5 percent of the valueof steel. This is an example of a (an):a. Specific tariffb. Ad valorem tariffc. Compound tariffd. Tariff quotaANS: C PTS: 153. A compound tariff is a combination of a (an):a. Tariff quota and a two-tier tariffb. Revenue tariff and a protective tariffc. Import tariff and an export tariffd. Specific tariff and an ad valorem tariffANS: D PTS: 1Table 4.1. Production Costs and Prices of Imported and Domestic VCRsImported VCRs Domestic VCRs Component parts $150 Imported component parts $150 Assembly cost/profit 50 Assembly cost 50 Nominal tariff 25 Profit 25 Import price Domestic priceafter tariff 225 after tariff 22554. Consider Table 4.1. Prior to the tariff, the total price of domestically-produced VCRs is:a. $150b. $200c. $225d. $250ANS: B PTS: 155. Consider Table 4.1. Prior to the tariff, the total price of imported VCRs is:a. $150b. $200c. $225d. $235ANS: B PTS: 156. Consider Table 4.1. The nominal tariff rate on imported VCRs equals:a. 11.1 percentb. 12.5 percentc. 16.7 percentd. 50.0 percentANS: B PTS: 157. Consider Table 4.1. Prior to the tariff, domestic value added equals:a. $25b. $50c. $75d. $100ANS: B PTS: 158. Consider Table 4.1. After the tariff, domestic value added equals:a. $25b. $50c. $75d. $100ANS: C PTS: 159. Consider Table 4.1. The effective tariff rate equals:a. 11.1 percentb. 16.7 percentc. 50.0 percentd. 100.0 percentANS: C PTS: 160. If the domestic value added before an import tariff for a product is $500 and the domestic valueadded after the tariff is $550, the effective rate of protection is:a. 5 percentb. 8 percentc. 10 percentd. 15 percentANS: C PTS: 161. When a tariff on imported inputs exceeds that on the finished good,a. The nominal tariff rate on the finished product would tend to overstate its protective effectb. The nominal tariff rate would tend to understate it's protective effectc. It is impossible to determine the protective effect of a tariffd. Tariff escalation occursANS: A PTS: 162. The offshore assembly provision in the U.S.a. Provides favorable treatment to U.S. trading partnersb. Discriminates against primary product importersc. Provides favorable treatment to products assembled abroad from U.S. manufacturedcomponentsd. Hurts the U.S. consumerANS: C PTS: 163. Arguments for U.S. trade restrictions include all of the following excepta. Job protectionb. Infant industry supportc. Maintenance of domestic living standardd. Improving incomes for developing countriesANS: D PTS: 164. For the United States, a foreign trade zone (FTZ) isa. A site within the United Statesb. A site outside the United Statesc. Always located in poorer developing countriesd. Is used to discourage tradeANS: A PTS: 1TRUE/FALSE1. To protect domestic producers from foreign competition, the U.S. government levies both importtariffs and export tariffs.ANS: F PTS: 12. With a compound tariff, a domestic importer of an automobile might be required to pay a duty of$200 plus 4 percent of the value of the automobile.ANS: T PTS: 13. With a specific tariff, the degree of protection afforded domestic producers varies directly withchanges in import prices.ANS: F PTS: 14. During a business recession, when cheaper products are purchased, a specific tariff providesdomestic producers a greater amount of protection against import-competing goods.ANS: T PTS: 15. A ad valorem tariff provides domestic producers a declining degree of protection againstimport-competing goods during periods of changing prices.ANS: F PTS: 16. With a compound duty, its "specific" portion neutralizes the cost disadvantage of domesticmanufacturers that results from tariff protection granted to domestic suppliers of raw materials, and the "ad valorem" portion of the duty grants protection to the finished-goods industry.ANS: T PTS: 17. The nominal tariff rate signifies the total increase in domestic productive activities compared towhat would occur under free-trade conditions.ANS: F PTS: 18. When material inputs enter a country at a very low duty while the final imported product isprotected by a high duty, the result tends to be a high rate of protection for domestic producers of the final product.ANS: T PTS: 19. According to the tariff escalation effect, industrial countries apply low tariffs to imports offinished goods and high tariffs to imports of raw materials.ANS: F PTS: 110. Under the Offshore Assembly Provision of U.S. tariff policy, U.S. import duties apply only to thevalue added in the foreign assembly process, provided that U.S.-made components are used by overseas companies in their assembly operations.ANS: T PTS: 111. Bonded warehouses and foreign trade zones have the effect of allowing domestic importers topostpone and prorate over time their import duty obligations.ANS: T PTS: 112. A nation whose imports constitute a very small portion of the world market supply is a price taker,facing a constant world price for its import commodity.ANS: T PTS: 113. Graphically, consumer surplus is represented by the area above the demand curve and below theproduct's market price.ANS: F PTS: 114. Producer surplus is the revenue producers receive over and above the minimum necessary forproduction.ANS: T PTS: 115. For a "small" country, a tariff raises the domestic price of an imported product by the full amountof the duty.ANS: T PTS: 116. Although an import tariff provides the domestic government additional tax revenue, it benefitsdomestic consumers at the expense of domestic producers.ANS: F PTS: 117. An import tariff reduces the welfare of a "small" country by an amount equal to the redistributioneffect plus the revenue effect.ANS: F PTS: 118. The deadweight losses of an import tariff consist of the protection effect plus the consumptioneffect.ANS: T PTS: 119. The redistribution effect is the transfer of producer surplus to domestic consumers of theimport-competing product.ANS: F PTS: 120. As long as it is assumed that a nation accounts for a negligible portion of international trade, itslevying an import tariff necessarily increases its overall welfare.ANS: F PTS: 121. Changes in a "large" country's economic conditions or trade policies can affect the terms atwhich it trades with other countries.ANS: T PTS: 122. A "large" country, that levies a tariff on imports, cannot improve the terms at which it trades withother countries.ANS: F PTS: 123. For a "large" country, a tariff on an imported product may be partially absorbed by the domesticconsumer via a higher purchase price and partially absorbed by the foreign producer via a lower export price.ANS: T PTS: 124. If a "large" country levies a tariff on an imported good, its overall welfare increases if themonetary value of the tariff's consumption effect plus protective effect exceeds the monetary value of the terms-of-trade effect.ANS: F PTS: 125. If a "small" country levies a tariff on an imported good, its overall welfare increases if themonetary value of the tariff's consumption effect plus protective effect is less than the monetary value of the terms-of-trade effect.ANS: F PTS: 126. A tariff on steel imports tends to improve the competitiveness of domestic automobilecompanies.ANS: F PTS: 127. If a tariff reduces the quantity of Japanese autos imported by the United States, over time itreduces the ability of Japan to import goods from the United States.ANS: T PTS: 128. A compound tariff permits a specified amount of goods to be imported at one tariff rate while anyimports above this amount are subjected to a higher tariff rate.ANS: F PTS: 129. A tariff can be thought of as a tax on imported goods.ANS: T PTS: 130. Although tariffs on imported steel may lead to job gains for domestic steel workers, they can leadto job losses for domestic auto workers.ANS: T PTS: 131. Relatively low wages in Mexico make it impossible for U.S. manufacturers of labor-intensivegoods to compete against Mexican manufacturers.ANS: F PTS: 132. According to the infant-industry argument, temporary tariff protection granted to an infantindustry will help it become competitive in the world market; when internationalcompetitiveness is achieved, the tariff should be removed.ANS: T PTS: 1Exhibit 4.2In the absence of international trade, assume that the equilibrium price and quantity of motorcycles in Canada is $14,000 and 10 units respectively. Assuming that Canada is a small country that is unable to affect the world price of motorcycles, suppose its market is opened to international trade. As a result, the price of motorcycles falls to $12,000 and the total quantity demanded rises to 14 units; out of this total, 6 units are produced in Canada while 8 units are imported. Now assume that the Canadian government levies an import tariff of $1,000 on motorcycles.33. Refer to Exhibit 4.2. As a result of the tariff, the price of imported motorcycles equals $13,000and imports total 4 cycles.ANS: T PTS: 134. Refer to Exhibit 4.2. The tariff leads to an increase in Canadian consumer surplus totaling$11,000.ANS: F PTS: 135. Refer to Exhibit 4.2. The tariff's redistribution effect equals $7,000.ANS: T PTS: 136. Refer to Exhibit 4.2. The tariff's revenue effect equals $6,000.ANS: F PTS: 137. Refer to Exhibit 4.2. All of the import tariff is shifted to the Canadian consumer via a higher priceof motorcycles.ANS: T PTS: 138. Refer to Exhibit 4.2. The tariff leads to a deadweight welfare loss for Canada totaling $1,000.ANS: F PTS: 139. Unlike a specific tariff, an ad valorem tariff differentiates between commodities with differentvalues.ANS: T PTS: 140. A limitation of a specific tariff is that it provides a constant level of protection for domesticcommodities regardless of fluctuations in their prices over time.ANS: F PTS: 141. A tariff quota is a combination of a specific tariff and an ad valorem tariff.ANS: F PTS: 142. A specific tariff is expressed as a fixed percentage of the total value of an imported product.ANS: F PTS: 143. The protective effect of a tariff occurs to the extent that less efficient domestic production issubstituted for more efficient foreign production.ANS: T PTS: 144. A tariff can increase the welfare of a "large" levying country if the favorable terms-of-tradeeffect more than offsets the unfavorable protective effect and consumption effect.ANS: T PTS: 145. If the world price of steel is $600 per ton, a specific tariff of $120 per ton is equivalent to an advalorem tariff of 25 percent.ANS: F PTS: 146. An import tariff will worsen the terms of trade for a "small" country but improve the terms oftrade for a "large" country.ANS: F PTS: 147. Suppose that the tariff on imported steel is 40 percent, the tariff on imported iron ore is 20 percent,and 30 percent of the cost of producing a ton of steel consists of the iron ore it contains. The effective rate of protection of steel is approximately 49 percent.ANS: T PTS: 1。
美国北美贸易协议书英文版

美国北美贸易协议书英文版The North American Free Trade Agreement (NAFTA) is a landmark trade agreement between the United States, Canada, and Mexico. Signed in 1994, it has been in effect for over two decades and has had a profound impact on the economies and trade relations of the three countries. This essay aims to provide an overview of the NAFTA agreement, its key provisions, and its effects on the involved nations.The main objective of NAFTA is to promote free trade and economic integration between the United States, Canada, and Mexico. The agreement eliminates most tariffs and trade barriers on goods and services traded between the three countries. This reduction in trade barriers has led to a significant increase in trade volume between the three nations, with the NAFTA area becoming one of the largest trading blocs in the world.NAFTA covers a wide range of sectors, including agriculture, manufacturing, and services. It includes provisions on intellectual property, investment, and dispute resolution mechanisms. One of the key features of NAFTA is the elimination of tariffs on agricultural products, which has led to increased agricultural trade between the United States and Mexico. It has also opened up new opportunities for American and Canadian companies to invest and operate in Mexico, and vice versa.NAFTA has had a significant impact on the economies of the three countries. It has contributed to increased economic growth, job creation, and higher living standards. According to a report by the U.S. International Trade Commission, NAFTA has led to anincrease in the United States' GDP by 0.5% to 0.9% and has created thousands of jobs.However, NAFTA has also faced criticism from various quarters. Critics argue that the agreement has led to job losses in certain sectors, particularly manufacturing, as companies moved production to Mexico where labor costs are lower. They also claim that NAFTA has led to environmental degradation and a decrease in labor standards. In response to these concerns, the United States, Canada, and Mexico renegotiated the agreement and agreed to the United States-Mexico-Canada Agreement (USMCA) in 2018.The USMCA addressed some of the concerns raised about NAFTA. It includes provisions on labor and environmental standards, requires a higher proportion of automotive components to be produced within North America, and provides increased market access for certain agricultural products. The USMCA also includes a dispute resolution mechanism, which is similar to the one in NAFTA but with some modifications.The USMCA was ratified by the three countries and came into effect on July 1, 2020. It is expected to further promote trade and economic integration among the three nations. The new agreement is also expected to bring about changes in certain industries, such as the automotive sector, where companies will need to adjust their supply chains to comply with the new rules of origin.In conclusion, NAFTA and its successor, the USMCA, have had a significant impact on trade and economic relations in North America. The agreements have promoted free trade, economicintegration, and increased economic growth among the United States, Canada, and Mexico. While there have been criticisms of NAFTA, the renegotiation and implementation of the USMCA address some of these concerns and provide a framework for continued cooperation and collaboration among the three nations. The future of North American trade will depend on the successful implementation and enforcement of the USMCA and further efforts to deepen economic integration and cooperation in the region.。
国际贸易双语教程英文版

国际贸易双语教程英文版IntroductionInternational trade is an essential part of the global economy. It involves the exchange of goods and services between countries. In this bilingual tutorial, we will provide an overview of international trade and explore its various aspects. This tutorial aims to help readers gain a thorough understanding of international trade concepts and terminology in English.1. Understanding International TradeInternational trade refers to the exchange of goods and services across international borders. It allows countries to specialize in producing goods and services that they can produce efficiently, ensuring maximum productivity and resource utilization. This leads to increased economic growth and welfare for participating nations.2. Benefits of International TradeInternational trade offers several advantages to participating countries. These benefits include:•Improved Efficiency: Countries can focus on producing goods and services that they can produce efficiently, increasing overall productivity.•Access to a Wider Range of Goods: Countries can import goods not produced domestically, allowing consumers access to a broader selection of products.•Expanding Markets: With international trade, businesses can reach new markets abroad, enabling them to grow and expand.•Economic Growth: International trade stimulates economic growth by promoting investment, job creation, and innovation.•Lower Costs: Countries can import goods at a lower cost than producing them domestically, leading to cost savings for consumers andbusinesses.3. Trade BarriersDespite the benefits of international trade, various barriers can hinder smooth trade operations. These barriers include:•Tariffs: Tariffs are taxes imposed on imported goods, increasing their prices and reducing demand.•Quotas: Quotas limit the quantity of goods that can be imported, restricting access to foreign markets.•Regulatory Barriers: These include regulations, standards, and certifications that goods must meet to enter a country, creating additional costs and hurdles for exporters.•Currency Barriers: Fluctuations in exchange rates can affect the competitiveness of goods in international markets.•Trade Restrictions: Embargoes, trade sanctions, and trade wars can further hinder international trade.4. International Trade AgreementsTo promote and regulate international trade, countries often engage in the negotiation and formation of trade agreements. These agreements aim to reduce trade barriers and create a more favorable trade environment. Some prominent international trade agreements include:•World Trade Organization (WTO): The WTO is a global organization that promotes free trade and resolves trade disputes amongmember countries.•Free Trade Agreements (FTAs): FTAs are agreements between countries that eliminate or reduce trade barriers among participating nations.•Regional Trade Agreements (RTAs): RTAs are trade agreements between countries within a specific geographic region.•Bilateral Agreements: Bilateral agreements are trade agreements between two countries, focusing on addressing trade barriers and promoting trade.•Multilateral Agreements: Multilateral agreements involve multiple countries negotiating and establishing trade rules and regulations.5. Trade DocumentationInternational trade involves significant documentation to ensure smooth and legal transactions between parties. Some essential trade documents include: •Commercial Invoice: An invoice that provides detailed information about the goods being sold, including quantity, price, and delivery terms.•Bill of Lading: It is a document issued by a carrier that acknowledges the receipt of goods for shipment.•Packing List: A detailed list of the contents and quantities of a shipment.•Certificate of Origin: It certifies the origin of the goods and is needed to claim preferential treatment under trade agreements.•Insurance Certificate: A document that confirms that goods are insured against loss or damage during transportation.•Customs Declaration: A document that provides information about the goods being imported or exported and helps calculate applicable customs duties and taxes.ConclusionInternational trade plays a crucial role in the global economy, enabling countries to benefit from specialization, economic growth, and improved welfare. This bilingual tutorial aimed to provide an overview of international trade in English, covering its various aspects from understanding the basics to trade barriers, agreements, and documentation. By understanding these concepts, readers can engage in international trade activities more effectively and confidently.。
希尔-国际商务-第一章

9e
By Charles W.L. Hill
McGraw-Hill/Irwin Copyright © 2013 by The McGraw-Hill Companies, Inc. All rights reserved.
Chapter 1
Globalization
1-3
What Is The Globalization of Markets?
Historically distinct and separate national markets are merging It no longer makes sense to talk about the “German market” or the “American market” Instead, there is the “global market”
1-10
What Do Global Institutions Do?
The United Nations (1945)
maintains international peace and security develops friendly relations among nations cooperates in solving international problems and in promoting respect for human rights is a center for harmonizing the actions of nations
Why Do We Need Global Institutions?
Examples include the General Agreement on Tariffs and Trade (GATT) the World Trade Organization (WTO) the International Monetary Fund (IMF) the World Bank the United Nations (UN) the G20
会谈记录的英语作文

会谈记录的英语作文Title: Meeting Minutes: Discussion on International Trade Relations。
Date: April 20, 2024 。
Venue: United Nations Headquarters, New York 。
Participants: Representatives from Various Nations 。
Agenda: 。
1. Review of Current Trade Policies 。
2. Discussion on Bilateral Trade Agreements 。
3. Exploration of Multilateral Trade Cooperation 。
4. Future Strategies for Promoting Global Trade 。
Minutes of the Meeting:The meeting commenced with representatives from various nations gathering at the United Nations Headquarters in New York to discuss crucial matters pertaining to international trade relations. The discussion was initiated by acknowledging the significance of fostering mutually beneficial trade relationships in today's interconnected global economy.Review of Current Trade Policies:The representatives engaged in a comprehensive review of the existing trade policies implemented by their respective countries. This included an assessment of tariffs, quotas, and other trade barriers that might hinder the free flow of goods and services across borders. Several delegates highlighted the importance of periodically reassessing and updating these policies to adapt to evolving economic dynamics.Discussion on Bilateral Trade Agreements:A significant portion of the meeting was dedicated to deliberating on the effectiveness of bilateral trade agreements in enhancing trade between nations. Delegates shared their experiences and insights regarding successful bilateral trade partnerships and emphasized the need for transparency and fairness in negotiations. Additionally, there was consensus on the importance of addressing any trade imbalances that might arise as a result of such agreements.Exploration of Multilateral Trade Cooperation:The participants recognized the potential benefits of multilateral trade cooperation in promoting economic growth and stability on a global scale. They discussed the role of international organizations, such as the World Trade Organization (WTO), in facilitating multilateral trade negotiations and resolving disputes. Furthermore, there was a shared commitment to upholding the principles of free trade and open markets while addressing the concerns of all member states.Future Strategies for Promoting Global Trade:As the meeting drew to a close, the representatives exchanged ideas on future strategies for advancing global trade relations. Key areas of focus included leveraging technology to streamline trade processes, promoting sustainable development practices, and fostering inclusive trade policies that benefit all stakeholders. There was unanimous agreement on the importance of collaboration and dialogue among nations to overcome challenges and seize opportunities in the ever-changing global trade landscape.Conclusion:In conclusion, the meeting served as a valuable platform for constructive dialogue and exchange of ideas on enhancing international trade relations. The participants reaffirmed their commitment to promoting a rules-based and inclusive global trading system that fosters economic prosperity and development for all nations. Moving forward, they pledged to continue working together towards achievingthese shared objectives.Action Items:1. Conduct a follow-up review of bilateral trade agreements to address any emerging issues or concerns.2. Explore opportunities for increased collaboration on multilateral trade initiatives within international organizations.3. Continuously monitor and adapt trade policies to promote fairness, transparency, and sustainability in global trade.The meeting adjourned with a sense of optimism and determination to build stronger and more resilient trade relationships in the years to come.。
国际贸易试题含答案

国际贸易试题含答案Question 1:What is international trade and why is it important for countries?Answer:International trade refers to the exchange of goods, services, and capital between different countries. It is an essential aspect of globalization and plays a crucial role in the economic development of countries. International trade allows countries to specialize in producing goods and services that they have a comparative advantage in, and to import goods and services that are produced more efficiently by other countries. This leads to increased efficiency, higher economic growth, and improved living standards.Question 2:What are the different types of trade barriers?Answer:Trade barriers are obstacles that can restrict or limit the flow of goods and services between countries. They can be categorized into two main types: tariff barriers and non-tariff barriers.Tariff barriers include import taxes or duties imposed on imported goods, making them more expensive and less competitive compared to domestically produced goods. Tariffs can be specific (fixed amount per unit) or ad valorem (percentage of the value).Non-tariff barriers include quotas, which limit the quantity of goods that can be imported, and subsidies, which provide financial support to domestic industries, making them more competitive. Other non-tariff barriers include technical standards and regulations, licensing requirements, and government procurement policies.Question 3:What are the advantages and disadvantages of free trade?Answer:Advantages of free trade include:1. Increased economic efficiency: Free trade allows countries to specialize in producing goods and services that they have a comparative advantage in, leading to increased efficiency and higher economic output.2. Consumer benefits: Free trade provides consumers with a wider variety of goods and services at lower prices, as it encourages competition and reduces monopolistic practices.3. Economic growth: Free trade stimulates economic growth by promoting investment, innovation, and job creation.Disadvantages of free trade include:1. Job displacement: In certain industries, free trade can lead to job losses as domestic companies face competition from imported goods. However, proponents argue that the overall benefits outweigh these localized disadvantages.2. Economic dependence: Over-reliance on imported goods can make a country vulnerable to supply disruptions or price fluctuations in the global market.3. Unequal distribution of wealth: Free trade may contribute to income inequality within a country if the benefits are not distributed equitably.Question 4:What are the main objectives of international trade organizations?Answer:International trade organizations, such as the World Trade Organization (WTO), have several main objectives:1. Facilitating trade: International trade organizations aim to reduce trade barriers, simplify customs procedures, and promote the smooth flow of goods and services across borders.2. Ensuring fair trade: These organizations work to establish rules and regulations that can prevent unfair trade practices, such as dumping (selling goods below production cost) and subsidies that distort international trade.3. Resolving trade disputes: International trade organizations provide a platform for member countries to resolve trade disputes through negotiations and legal mechanisms.4. Promoting economic development: By facilitating trade and reducing trade barriers, international trade organizations contribute to the economic development of member countries, particularly those with limited resources or small economies.Question 5:How does international trade impact the environment?Answer:International trade can have both positive and negative impacts on the environment:1. Positive impacts: International trade can encourage the adoption of cleaner technologies and production processes through the transfer of knowledge and innovation across borders. It can also facilitate the conservation of resources through specialization, as countries can focus on producing goods and services that require fewer inputs.2. Negative impacts: Increased international trade can lead to a surge in transportation activities, which contributes to air pollution and greenhouse gas emissions. Moreover, some industries may exploit natural resources without adequate environmental regulations in place, leading to environmental degradation.To mitigate the negative environmental impacts of international trade, it is essential to promote sustainable trade practices and implement robust environmental regulations and standards.In conclusion, international trade is an integral part of the global economy and plays a vital role in the economic development of countries. It is important to understand the various aspects of international trade, including trade barriers, the advantages and disadvantages of free trade, the objectives of international trade organizations, and the impact of trade on theenvironment. By fostering fair and sustainable trade practices, countries can reap the benefits of international trade while minimizing its negative effects.。
经济学专业英语第八章原文
Unit8 Macro-economic PolicyPart one: TextMacro-economic policy refers to activities of governments that are designed toachieve full employment with price stability and equilibrium in the balance ofpayments. Generally, it includes (1) momentary and fiscal policies, (2) exchange-rateadjustments, (3) tariff and non-tariff trade barriers, (4) foreign-exchange controls andinvestments controls, and (5) export-promotion measures.Since the 1930s, nations have actively pursued internal balance '(full employmentwithout inflation) as a primary economic objective. Nations also consider external balance (balance-of-payments equilibrium) as an economic objective.A nation realizes overall balance when it attains internal balance and external balance.A.Police InstrumentTo attain the objectives of external balance and internal balance, policy makersenact expenditure-changing policies, expenditure-switching policies, and direct controls.Expenditure-changing policies alter the level of aggregate demand for goods andservices, including-those produced domestically and those imported. They includefiscalpolicy, which refers to changes in government spending and taxes, and monetarypolicy, which refers to changes in the money supply by a nation's central bank (such asthe FederalReserve). Depending onthe direction of change, expenditure-changingpolicies are either expenditure increasing or expenditure reducing.Expenditure-switching, policies modify thedirection of demand, shifting it betweendomestic output and imports. Under a system of fixed exchange rates, a trade-deficitnation could devalue its currency to increase the international competitiveness of its industries, thus diverting spending from foreign goods to domestic goods. To increase its competitiveness under a managed floating exchange-rate system, the nation could purchase other currencies with its currency, hereby causing the change value of its currency to depreciate. The success of these policies in promoting trade balance largely depends on switching demand in the proper direction and amount, as well as on the capacity of the home economy to meet the additional demand by supplying more goods.Direct controls consist of government restrictions on the market economy, and mayalso be levied on capital flows so as to either restrain excessive capital outflows orstimulatecapital inflows.B.Monetary Policy and Fiscal PolicyLt is known to all of us, the exchange-rate polices primarily affect the economy ' external sector, while having secondary effects on its' internal sector. Let's now consider monetary police and fiscalpolice as stabilization tools. These tools are generally used to stabilize the economy’s internal sector. While having secondary effects on its external sector. How successful are monetary police and fiscal police in achieving fullemployment and price stability?Let us assume that the mobility of international capitalis high. This suggests that a small change in the relative interest rate across nations, induces a large international flow of capital (investment funds).This assumption is consistent with capital movementsamong many industrial nations, such as United States }and Germany, and the conclusions of many analysts that capital mobility is increasing as national financial markets have become internationalized.Two conclusion will emerge from our discussion: Under a fixed exchange- rate system, fiscal police is successful in promoting internal balance, whereas monetary policeisunsuccessful; (2) under a floating rate system, monetary police is successful in Promoting internal balance, whereas fiscal police is unsuccessful.C.Tariff and Non-tariff Trade BarriersA tariff is a duty or fee levied on: goods and service being, imported into the country. These tariffs can be of two types: protective and revenue. Protective tariffs (import taxes) are designed to raise the, retail price of imported products so that domestic goods will be more competitive and. foreign business. Will be discouraged from shipping certain goods into the country. . These tariffs are meant to save jobs for domestic workers and to keep industries (especially infant industries) from bankruptcy because of foreigncompetition. A revenue tariff is designed to raise money for the 'government.Today there is still considerable debate about the degree of protectionism agovernment should practice. Nevertheless, almost all countries practice a police ofprotective tariff and both import and export goods are subject to customs duties. Tariff (customs) duties are of three types: specific, ad valorem arid compound.Non-tariff barriers are less visible, but they are extremely effective restrictions ontrade. The principlecategories of NTBs are quota, license and new barriers.D.What and How Are the Major Objectives of Macro- economicPolicy?The four major objectives are (1) furl employment, (2) price stability, (3) a high, but sustainable, rate of economic growth, and (4) keeping the Balance of Payments inEquilibrium. We will look at the way in which these objectives are measured.The first one is full employment or low employment. Those courted must be out of work; physically able to work and 'looking for it, and actually claiming benefit.Secondly, inflation is usually defined as a sustained rise in the general level of prices. Technically, it is measured as the annual rate of change of the Retail Price Index CRP), often referred to as the headline rate of inflation. For prices to be stable therefore, the inflation rate should be zero. Generally governments are happy if they can keep the inflation rate down to a low percentage. This is the same as the RPI except housing costs are removed in the shape of mortgage interest payments. It makes sense for the government to use this measure because the weapon they use to control inflation, interest rates directly affects the RPI itself.Economic growth tends to be 'measured in terms of the rate of change of real GDP (Gross Domestic Product). When the word real accompanies any statistic, it means thatthe effects of inflation have been removed. More on this later! GDP is a measure of the annual output (or income, or expenditure) of an economy. Much more on this later! Sometimes GNP (Gross National Product) is used, which is very similar to GDP Growth figures are published quarterly, both in terms of-the change quarter on quarter and as annual percentage changes (See Figure 8-1).Last but not; the least, keeping the Balance of, Payments in equilibrium refers to all flows of money into; and out of a country. It is split into two: the Current Account and The Capital and Financial Accounts (former[y the capital account).Probably the most important is the Current Account, because this records how wellthe country is doing in terms of its exports of goods and services relativeto. Its imports. If the country is to “pay its way “in the world over the long term, then it needs to keep earning enoughforeigncurrency from its exports to pay for its imports. If this is not thecase, the account will be in deficit. Japan has the largest surplus in the world. Althougha surplus sounds better than a deficit, both can be bad. Japan's surplus forces othercountries in the worldto have deficits. In fact, while Japan's surplus is the biggest in theworld, the USA's deficit is the biggest in the world. This is not a coincidence!Notes1.infant industry幼稚产业It refers to the new industrieswhich consist of new companies in the early stages of growth.2.specific duties 从量税Specific duties are levied at the rate of so muchper unit, pound, kilo or gallon. For example, the specific duty of one product might-be US$ 10 per unit, while on another it might be US$ 0. 25 per pound.3.ad valorem duties 从价税Ad valorem duties are levied on the basis of the product's value. The value of import goods usually refers to their CIF( Cost, Insurance and Freight,包括成本、保险、运费在内的到岸价格)value, and that of export goods; their FOB ( Free on Board,船上交货) value with the export duties deducted. For example: an ad valorem duty of7%ona particular product valued at US$ 1OOwould result in a US$ 7tariff. If a firm shipped ten of these products,the tariff would be US$70.pound duties 复合税Compound duties are a combination of specific and ad valorem duties. For example, suits are taxed on both quantity and value, the duty on them has been, say US$0.37perpound and 21% ad valorem.5.quota 定额,配额A quota is a quantitative restriction, thatis expressedin terms of either physical quantity or value. A quota that states that no more than 500,000 Class A deluxe limousines (豪华轿车) can be imported from Europe each year is a restriction stated in terms of physical quantity.6.license 许可证制度License is an official permission of an importantthatis 'forbidden withouta license. In the important countries, quota usually require a licensingsystem and an agency to distribute thequota shares to domestic importers.7.new barriers 新壁垒There are ingenious newbarriers which 'are constantly being developed. Some arelegitimate regulatory functions, such as antipollution regulations thatrequire automobilestomeet certain exhaust emission standards.Othersmay ostensibly beintroduced forreasons ofhealth,safety, or national security but are actually intended to restrict trade.PartTwo:CasestudyTHE CROOKED PATH OF CAPITALISMCapitalism has been subject to booms and busts forat least the past 300 years notable early example of which, weretheDutch mania and the British South SeaBubbleof the early 18th century. Any market system including marketsocialism, if that had ever got off the ground--would probably have been, subject to similarfluctuations based as they are on human cycles of greed arid fear and alternationsbetween unfounded optimism and unreasoning pessimism. Attempts to establish; a cycleof regular duration and amplitude have failed. These fluctuations can, with a bit of luckand. good policy, be tamedbut not abolished.The decade and a half of steady low inflation growth enjoyed by the UK since leaving the European exchange rate mechanism in 1992 has been quite exceptional, as have even the four years of similar behavior enjoyed by the Group of Seven leading industrial nations as a whole. The confidence of mainstream forecasters in predicting yet another Goldilocks period for the world economy should have made one suspicious, not because ofthe faltering in the second quarter of this year, but because experts are never as likely to be wrong as when they speak with near unanimity.Some economists of Austrian origin have claimed that recessions have their value in liquidating unwise investments and that attempts to keep the economy going full blast all the time only store up greater trouble for the future. It was their misfortune that their theory was promulgated during the Great Depression of the 1930s, when there really was a deficiency of purchasing power, which made them seem irrelevant. The Anglo-Austrian, Friedrich Hayek, tried to make amends by accepting the need to counter a secondary depression resulting from the multiplier effects of reduced investment spending, but he did so much too late, in the 1960s and 1970s. By then, Austrian economics had become a minority movement among US economists, who were beset by heresy hunting.Today, the torch seems to have been taken up in Shanghai, where an economist, Andy Xie, has written that “it is time for central banks to stop bailing out markets”, blaming current troubles on central banks, which after the attacks of September 11 2001 provided the cheap credit for the leverage bubble (Financial Times, August 14). Some central bankers are stillsuffering from a guilt complex arising from the failure of the US Federal Reserve to counteract a multiple contraction at the onset of the Great Depression.When it comes to the present turbulence, a select band of analysts is entitled to say: “We told you so.” They include Paul De Grauwe, the Belgian economist; Lord Lamont, the former British chancellor; and some brave economists at the Basle-based Bank for International Settlements who have been beavering away at the need to monitor asset prices, and not just for their possible effects on consumer price inflation.The inflationary effects of easy credit have, until now, been offset by the threat of cheap imports from the developing world. But now that China and other developing countries are themselves experiencing high and rising inflation, loose money in the west, as Mr Xie points out, will feed straight into prices and the credibility of central banks could be fatally undermined.The direct responsibility of central banks for controlling inflation is comparatively recent. They were traditionally bankers to the banks, in which capacity they became lenders of last resort. The art is to be ready to intervene without creating a moral hazard that unwise lenders will be painlesslyrescued. The duty of such lenders was laid out in the mid-19th century by a famous early editor of The Economist, Walter Bagehot. This was not to bail out specific institutions, but to lend unlimited amounts to bona fide financial institutions at a penal rate. At first sight the European Central Bank, which has let it be known how many billions of euros it has made available, has been closely following Bagehot, but with one crucial difference. Instead of lending at a penalty rate, it has been chiefly concerned to keep the very short-term rate near the 4 per cent policy rate decided before the crisis broke.The Bank of England was in some ways the best prepared. Under reforms introduced a year ago, 57 banks can borrow limitless cash but at a price 100 basis points above the target bank rate. But even this system will come under strain in a full-blown financial gale. There is little doubt that there would be rescues for large institutions whose failure would pose a “systemic risk”, which the Barings crisis of 1890 apparently did but the one of 1995 did not. Life, as cynical Tories are fond of saying, is unfair.Fed interventions have been more discretionary and less rule-bound. But unwise US fund managers have been berating Ben Bernanke, the US Federal Reserve chairman, for not bailing outthe market. This is the voice of those who at the slightest sign of trouble call for cheap money and plenty of it. It is the mirror image of those lumpen Marxists who greet every financial shock by gloating that the long-predicted final crisis of capitalism has arrived. They deserve each other.。
《中国-东盟全面经济合作框架协议》英文
FRAMEWORK AGREEMENT ON COMPREHENSIVE ECONOMIC CO-OPERATION BETWEEN THE PEOPLE’S REPUBLIC OF CHINA AND THE ASSOCIATION OF SOUTH EAST ASIAN NATIONSPREAMBLEWE, the Heads of Government/State of the People’s Republic of China (“China”), and Brunei Darussalam, the Kingdom of Cambodia, the Republic of Indonesia, the Lao People's Democratic Republic ("Lao PDR"), Malaysia, the Union of Myanmar, the Republic of the Philippines, the Republic of Singapore, the Kingdom of Thailand and the Socialist Republic of V iet Nam, Member States of the Association of South East Asian Nations (collectively, “ASEAN”or “ASEAN Member States”, or individually, “ASEAN Member State”):RECALLING our decision made at the ASEAN-China Summit held on 6 November 2001 in Bandar Seri Begawan, Brunei Darussalam, regarding a Framework on Economic Co-operation and to establish a China-ASEAN Free Trade Area (“China-ASEAN FTA”) within ten years with special and differential treatment and flexibility for the newer ASEAN Member States of Cambodia, Lao PDR, Myanmar and V iet Nam (“the newer ASEAN Member States”) and with provision for an early harvest in which the list of products and services will be determined by mutual consultation;DESIRING to adopt a Framework Agreement on Comprehensive Economic Co-operation (“this Agreement”) between China and ASEAN (collectively, “the Parties”, or individually referring to an ASEAN Member State or to China as a “Party”) that is forward-looking in order to forge closer economic relations in the 21st century;DESIRING to minimise barriers and deepen economic linkages between the Parties; lower costs; increase intra-regional trade and investment; increase economic efficiency; create a larger market with greater opportunities and larger economies of scale for the businesses of the Parties; and enhance the attractiveness of the Parties to capital and talent;BEING confident that the establishment of a China-ASEAN FTA will create a partnership between the Parties, and provide an important mechanism for strengthening co-operation and supporting economic stability in East Asia;RECOGNISING the important role and contribution of the business sector in enhancing trade and investment between the Parties and the need to further promote and facilitate their co-operation and utilisation of greater business opportunities provided by the China-ASEAN FTA;RECOGNISING the different stages of economic development among ASEAN Member States and the need for flexibility, in particular the need to facilitate the increasing participation of the newer ASEAN Member States in the China-ASEAN economic co-operation and the expansion of their exports, including, inter alia, through the strengthening of their domestic capacity, efficiency and competitiveness;REAFFIRMING the rights, obligations and undertakings of the respective parties under the World Trade Organisation (WTO), and other multilateral, regional and bilateral agreements and arrangements;RECOGNISING the catalytic role that regional trade arrangements can contribute tow ards accelerating regional and global liberalisation and as building blocks in the framework of the multilateral trading system;HA VE AGREED AS FOLLOWS:ARTICLE 1ObjectivesThe objectives of this Agreement are to:(a) strengthen and enhance economic, trade and investment co-operation between the Parties;(b) progressively liberalise and promote trade in goods and services as well as create a transparent, liberal and facilitative investment regime;(c) explore new areas and develop appropriate measures for closer economic co-operation between the Parties; and(d) facilitate the more effective economic integration of the newer ASEAN Member States and bridge the development gap among the Parties.ARTICLE 2Measures For Comprehensive Economic Co-operationThe Parties agree to negotiate expeditiously in order to establish a China-ASEAN FTA within 10 years, and to strengthen and enhance economic co-operation through the following:(a) progressive elimination of tariffs and non-tariff barriers in substantially all trade in goods;(b) progressive liberalisation of trade in services with substantial sectoral coverage;(c) establishment of an open and competitive investment regime that facilitates and promotes investment within the China-ASEAN FTA;(d) provision of special and differential treatment and flexibility to the newer ASEAN Member States;(e) provision of flexibility to the Parties in the China-ASEAN FTA negotiations to address their sensitive areas in the goods, services and investment sectors with such flexibility to be negotiated and mutually agreed based on the principle of reciprocity and mutual benefits;(f) establishment of effective trade and investment facilitation measures, including, but not limited to, simplification of customs procedures and development of mutual recognition arrangements;(g) expansion of economic co-operation in areas as may be mutually agreed between the Parties that will complement the deepening of trade and investment links between the Parties and formulation of action plans and programmes in order to implement the agreed sectors/areas of co-operation; and(h) establishment of appropriate mechanisms for the purposes of effective implementation of this Agreement.PART 1ARTICLE 3Trade In Goods1. In addition to the Early Harvest Programme under Article 6 of this Agreement, and with a view to expediting the expansion of trade in goods, the Parties agree to enter into negotiations in which duties and other restrictive regulations of commerce (except, where necessary, those permitted under Article XXIV (8)(b) of the WTO General Agreement on Tariffs and Trade (GA TT)) shall be eliminated on substantially all trade in goods between the Parties.2. For the purposes of this Article, the following definitions shall apply unless the context otherwise requires:(a) “ASEAN 6”refers to Brunei, Indonesia, Malaysia, Philippines, Singapore and Thailand;(b) “applied MFN tariff rates”shall inc lude in-quota rates, and shall:(i) in the case of ASEAN Member States (which are WTO members as of 1 July 2003) and China, refer to their respective applied rates as of 1 July 2003; and(ii) in the case of ASEAN Member States (which are non-WTO members as of 1 July 2003), refer to the rates as applied to China as of 1 July 2003;(c) “non-tariff measures”shall inc lude non-tariff barriers.3. The tariff reduction or elimination programme of the Parties shall require tariffs on listed products to be gradually reduced and where applicable, eliminated, in accordance with this Article.4. The products which are subject to the tariff reduction or elimination programme under this Article shall include all products not covered by the Early Harvest Programme under Article 6 of this Agreement, and such products shall be categorised into 2 Tracks as follows:(a) Normal Track: Products listed in the Normal Track by a Party on its own accord shall:(i) have their respective applied MFN tariff rates gradually reduced or eliminated in accordance with specified schedules and rates (to be mutually agreed by the Parties) over a period from 1 January 2005 to 2010 for ASEAN 6 and China, and in the case of the newer ASEAN Member States, the period shall be from 1 January 2005 to 2015 with higher starting tariff rates and different staging; and(ii) in respect of those tariffs which have been reduced but have not been eliminated under paragraph 4(a)(i) above, they shall be progressively eliminated within timeframes to be mutually agreed between the Parties.(b) Sensitive Track: Products listed in the Sensitive Track by a Party on its own accord shall:(i) have their respective applied MFN tariff rates reduced in accordance with the mutually agreed end rates and end dates; and(ii) where applicable, have their respective applied MFN tariff rates progressively eliminated within timeframes to be mutually agreed between the Parties.5. The number of products listed in the Sensitive Track shall be subject to a maximum ceiling to be mutually agreed among the Parties.6. The commitments undertaken by the Parties under this Article and Article 6 of this Agreement shall fulfil the WTO requirements to eliminate tariffs on substantially all the trade between the Parties.7. The specified tariff rates to be mutually agreed between the Parties pursuant to this Article shall set out only the limits of the applicable tariff rates or range for the specified year of implementation by the Parties and shall not prevent any Party from accelerating its tariff reduction or elimination if it so wishes to.8. The negotiations between the Parties to establish the China-ASEAN FTA covering trade in goods shall also include, but not be limited to the following:(a) other detailed rules governing the tariff reduction or elimination programme for the Normal Track and the Sensitive Track as well as any other related matters, including principles governingreciprocal commitments, not provided for in the preceding paragraphs of this Article;(b) Rules of Origin;(c) treatment of out-of-quota rates;(d) modification of a Party’s commitments under the agreement on trade in goods based on Article XXVIII of the GA TT;(e) non-tariff measures imposed on any products covered under this Article or Article 6 of this Agreement, including, but not limited to quantitative restrictions or prohibition on the importation of any product or on the export or sale for export of any product, as well as scientifically unjustifiable sanitary and phytosanitary measures and technical barriers to trade;(f) safeguards based on the GA TT principles, including, but not limited to the following elements: transparency, coverage, objective criteria for action, including the concept of serious injury or threat thereof, and temporary nature;(g) disciplines on subsidies and countervailing measures and anti-dumping measures based on the existing GA TT disciplines; and(h) facilitation and promotion of effective and adequate protection of trade-related aspects of intellectual property rights based on existing WTO, World Intellectual Property Organization (WIPO) and other relevant disciplines.ARTICLE 4Trade in ServicesWith a view to expediting the expansion of trade in services, the Parties agree to enter into negotiations to progressively liberalise trade in services with substantial sectoral coverage. Such negotiations shall be directed to:(a) progressive elimination of substantially all discrimination between or among the Parties and/or prohibition of new or more discriminatory measures with respect to trade in services between the Parties, except for measures permitted under Article V(1)(b) of the WTO General Agreement on Trade in Services (GA TS);(b) expansion in the depth and scope of liberalisation of trade in services beyond those undertaken China and ASEAN Member States under the GA TS; and(c) enhanced co-operation in services between the Parties in order to improve efficiency and competitiveness, as well as to diversify the supply and distribution of services of the respective service suppliers of the Parties.ARTICLE 5InvestmentTo promote investments and to create a liberal, facilitative, transparent and competitive investment regime, the Parties agree to:(a) enter into negotiations in order to progressively liberalise the investment regime;(b) strengthen co-operation in investment, facilitate investment and improve transparency of investment rules and regulations; and(c) provide for the protection of investments.ARTICLE 6Early Harvest1. With a view to accelerating the implementation of this Agreement, the Parties agree to implement an Early Harvest Programme (which is an integral part of the China-ASEAN FTA) for products covered under paragraph 3(a) below and which will commence and end in accordance with the timeframes set out in this Article.2. For the purposes of this Article, the following definitions shall apply unless the context otherwise requires:(a) “ASEAN 6”refers to Brunei, Indonesia, Malaysia, Philippines, Singapore and Thailand;(b) “applied MFN tariff rates”shall inc lude in-quota rates, and shall:(i) in the case of ASEAN Member States (which are WTO members as of 1 July 2003) and China, refer to their respective applied rates as of 1 July 2003; and(ii) in the case of ASEAN Member States (which are non-WTO members as of 1 July 2003), refer to the tariff rates as applied to China as of 1 July 2003.3. The product coverage, tariff reduction and elimination, implementation timeframes, rules of origin, trade remedies and emergency measures applicable to the Early Harvest Programme shall be as follows:(a) Product Coverage(i) All products in the following chapters at the 8/9 digit level (HS Code) shall be covered by the Early Harvest Programme, unless otherwise excluded by a Party in its Exclusion List as set out in Annex 1 of this Agreement, in which case these products shall be exempted for that Party:Chapter Description01 Live Animals02 Meat and Edible Meat Offal03 Fish04 Dairy Produce05 Other Animals Products06 Live Trees07 Edible V egetables08 Edible Fruits and Nuts(ii) A Party which has placed products in the Exclusion List may, at any time, amend the Exclusion List to place one or more of these products under the Early Harvest Programme.(iii) The specific products set out in Annex 2 of this Agreement shall be covered by the Early Harvest Programme and the tariff concessions shall apply only to the parties indicated in Annex 2. These parties must have extended the tariff concessions on these products to each other.(iv) For those parties which are unable to complete the appropriate product lists in Annex 1 or Annex 2, the lists may still be drawn up no later than 1 March 2003 by mutual agreement.(b) Tariff Reduction and Elimination(i) All products covered under the Early Harvest Programme shall be divided into 3 product categories for tariff reduction and elimination as defined and to be implemented in accordance with the timeframes set out in Annex 3 to this Agreement. This paragraph shall not prevent any Party from accelerating its tariff reduction or elimination if it so wishes.(ii) All products where the applied MFN tariff rates are at 0%, shall remain at 0%.(iii) Where the implemented tariff rates are reduced to 0%, they shall remain at 0%.(iv) A Party shall enjoy the tariff concessions of all the other parties for a product covered under paragraph 3(a)(i) above so long as the same product of that Party remains in the Early Harvest Programme under paragraph 3(a)(i) above.(c) Interim Rules of OriginThe Interim Rules of Origin applicable to the products covered under the Early Harvest Programme shall be negotiated and completed by July 2003. The Interim Rules of Origin shall be superseded and replaced by the Rules of Origin to be negotiated and implemented by the Partiesunder Article 3(8)(b) of this Agreement.(d) Application of WTO provisionsThe WTO provisions governing modification of commitments, safeguard actions, emergency measures and other trade remedies, including anti-dumping and subsidies and countervailing measures, shall, in the interim, be applicable to the products covered under the Early Harvest Programme and shall be superseded and replaced by the relevant disciplines negotiated and agreed to by the Parties under Article 3(8) of this Agreement once these disciplines are implemented.4. In addition to the Early Harvest Programme for trade in goods as provided for in the preceding paragraphs of this Article, the Parties will explore the feasibility of an early harvest programme for trade in services in early 2003.5. With a view to promoting economic co-operation between the Parties, the activities set out in Annex 4 of this Agreement shall be undertaken or implemented on an accelerated basis, as the case may be.PART 2ARTICLE 7Other Areas Of Economic Co-operation1. The Parties agree to strengthen their co-operation in 5 priority sectors as follows:(a) agriculture;(b) information and communications technology;(c) human resources development;(d) investment; and(e) Mekong River basin development.2. Co-operation shall be extended to other areas, including, but not limited to, banking, finance, tourism, industrial co-operation, transport, telecommunications, intellectual property rights, small and medium enterprises (SMEs), environment, bio-technology, fishery, forestry and forestry products, mining, energy and sub-regional development.3. Measures to strengthen co-operation shall include, but shall not be limited to:(a) promotion and facilitation of trade in goods and services, and investment, such as:(i) standards and conformity assessment;(ii) technical barriers to trade/non-tariff measures; and(iii) customs co-operation;(b) increasing the competitiveness of SMEs;(c) promotion of electronic commerce;(d) capacity building; and(e) technology transfer.4. The Parties agree to implement capacity building programmes and technical assistance, particularly for the newer ASEAN Member States, in order to adjust their economic structure and expand their trade and investment with China.PART 3ARTICLE 8Timeframes1. For trade in goods, the negotiations on the agreement for tariff reduction or elimination and other matters as set out in Article 3 of this Agreement shall commence in early 2003 and be concluded by 30 June 2004 in order to establish the China-ASEAN FTA covering trade in goods by 2010 for Brunei, China, Indonesia, Malaysia, the Philippines, Singapore and Thailand, and by 2015 for the newer ASEAN Member States.2. The negotiations on the Rules of Origin for trade in goods under Article 3 of this Agreement shall be completed no later than December 2003.3. For trade in services and investments, the negotiations on the respective agreements shall commence in 2003 and be concluded as expeditiously as possible for implementation in accordance with the timeframes to be mutually agreed: (a) taking into account the sensitive sectors of the Parties; and (b) with special and differential treatment and flexibility for the new er ASEAN Member States.4. For other areas of economic co-operation under Part 2 of this Agreement, the Parties shall continue to build upon existing or agreed programmes set out in Article 7 of this Agreement,develop new economic co-operation programmes and conclude agreements on the various areas of economic co-operation. The Parties shall do so expeditiously for early implementation in a manner and at a pace acceptable to all the parties concerned. The agreements shall include timeframes for the implementation of the commitments therein.ARTICLE 9Most-Favoured Nation TreatmentChina shall accord Most-Favoured Nation (MFN) Treatment consistent with WTO rules and disciplines to all the non-WTO ASEAN Member States upon the date of signature of this Agreement.ARTICLE 10General ExceptionsSubject to the requirement that such measures are not applied in a manner which would constitute a means of arbitrary or unjustifiable discrimination between or among the Parties where the same conditions prevail, or a disguised restriction on trade within the China-ASEAN FTA, nothing in this Agreement shall prevent any Party from taking and adopting measures for the protection of its national security or the protection of articles of artistic, historic and archaeological value, or such other measures which it deems necessary for the protection of public morals, or for the protection of human, animal or plant life and health.ARTICLE 11Dispute Settlement Mechanism1. The Parties shall, within 1 year after the date of entry into force of this Agreement, establish appropriate formal dispute settlement procedures and mechanism for the purposes of this Agreement.2. Pending the establishment of the formal dispute settlement procedures and mechanism under paragraph 1 above, any disputes concerning the interpretation, implementation or application of this Agreement shall be settled amicably by consultations and/or mediation.ARTICLE 12Institutional Arrangements For The Negotiations1. The China-ASEAN Trade Negotiation Committee (China-ASEAN TNC) that has been established shall continue to carry out the programme of negotiations set out in this Agreement.2. The Parties may establish other bodies as may be necessary to co-ordinate and implement any economic co-operation activities undertaken pursuant to this Agreement.3. The China-ASEAN TNC and any aforesaid bodies shall report regularly to the Minister of the Ministry of Foreign Trade and Economic Co-operation (MOFTEC) of China and the ASEAN Economic Ministers (AEM), through the meetings of the MOFTEC and ASEAN Senior Economic Officials (SEOM), on the progress and outcome of its negotiations.4. The ASEAN Secretariat and MOFTEC shall jointly provide the necessary secretariat support to the China-ASEAN TNC whenever and wherever negotiations are held.ARTICLE 13Miscellaneous Provisions1. This Agreement shall include the Annexes and the contents therein, and all future legal instruments agreed pursuant to this Agreement.2. Except as otherwise provided in this Agreement, this Agreement or any action taken under it shall not affect or nullify the rights and obligations of a Party under existing agreements to which it is a party.3. The Parties shall endeavour to refrain from increasing restrictions or limitations that would affect the application of this Agreement.ARTICLE 14AmendmentsThe provisions of this Agreement may be modified through amendments mutually agreed upon in writing by the Parties.ARTICLE 15DepositaryFor the ASEAN Member States, this Agreement shall be deposited with the Secretary-General of ASEAN, who shall promptly furnish a certified copy thereof, to each ASEAN Member State.ARTICLE 16Entry Into Force1. This Agreement shall enter into force on 1 July 2003.2. The Parties undertake to complete their internal procedures for the entry into force of this Agreement prior to 1 July 2003.3. Where a Party is unable to complete its internal procedures for the entry into force of this Agreement by 1 July 2003, the rights and obligations of that Party under this Agreement shall commence on the date of the completion of such internal procedures.4.A Party shall upon the completion of its internal procedures for the entry into force of this Agreement notify all the other parties in writing.IN WITNESS WHEREOF, WE have signed this Framework Agreement on Comprehensive Economic Co-operation between the People’s Republic of China and the Association of South East Asian Nations.DONE at Phnom Penh, this 4th day of November, 2002 in duplicate copies in the English Language.Annex1 Exclusion List Of A Party For Products Excluded From The Early Harvest Programme Under Article 6(3)(a)(i)Annex2 Specific Products Covered By The Early Harvest Programme Under Article 6(3)(a)(iii)Annex3 A.Product Categories for Tariff Reduction and Elimination Under Article 6(3)(b)(i) B.Implementation Timeframes Under Article 6(3)(b)(i)Annex 4 Activities Under Article 6(5)。
2014级商务导论lesson 1 International Business
(1) Preferential duties (优惠关税) Duty applied to importing goods according to its geographical source; a country that is given preferential treatment pays a lower tariff.
Acombination of duty placed on imported items, the amount of which is based on the above two duties.
E.g. 10% of the value + $1 per battery
If there is a shipment of 100 batteries valued at $2000
6. Forms of International Operation Agents Licensing/Franchising Outsourcing Branch Offices Direct investment
Global Business
7. Special Issues
Social & Cultural Differences Foreign Exchange Trade Barriers Tariffs Non-Tariff Barriers
① Circulation of goods, capital, services, employees & technology ② Importing & exporting ③ Cross-border transaction in IPR by licensing & franchising ④ Financing
国际经济学(双语)-第4章
4.2 Tariffs
Conclusion when material inputs or intermediate products enter a country at a very low duty while the final imported commodity is protected by a high duty, the result tends to be a high protection rate for the domestic producers. The nominal tariff rate on finished goods thus understates the effective rate of protection. But should a tariff be imposed on imported inputs that exceeds that on the finished good, the nominal tariff rate on the finished product would tend to overstate its protective effect.
Infant Industry Argument
This argument contends that for free trade to be meaningful, trading countries should temporarily shield their newly developing industries from foreign competition.
国际经济学(双语)-第4章
Chapter 4 Tariffs and Nontariff Barriers
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
The Basics Of Tariffs And Trade BarriersInternational trade increases the number of goods that domestic consumers can choose from, decreases the cost of those goods through increased competition, and allows domestic industries to ship their products abroad. While all of these seem beneficial, free trade isn't widely accepted as completely beneficial to all parties.What Is a Tariff?In simplest terms, a tariff is a tax. It adds to the cost of imported goods and is one of several trade policies that a country can enact.Why Are Tariffs and Trade Barriers Used?Tariffs are often created to protect infant industries and developing economies, but are also used by more advanced economies with developed industries. Here are five of the top reasons tariffs are used:1.Protecting Domestic EmploymentThe levying of tariffs is often highly politicized. The possibility of increased competition from imported goods can threaten domestic industries. These domestic companies may fire workers or shift production abroad to cut costs, which means higher unemployment and a less happy electorate. The unemployment argument often shifts to domestic industries complaining about cheap foreign labor, and how poorworking conditions and lack of regulation allow foreign companies to produce goods more cheaply. In economics, however, countries will continue to produce goods until they no longer have a comparative advantage.2.Protecting ConsumersA government may levy a tariff on products that it feels could endanger its population. For example,South Korea may place a tariff on imported beef from the United States if it thinks that the goods could be tainted with disease.3.Infant IndustriesThe use of tariffs to protect infant industries can be seen by the Import Substitution Industrialization (ISI) strategy employed by many developing nations. The government of a developing economy will levytariffs on imported goods in industries in which it wants to foster growth. This increases the prices ofimported goods and creates a domestic market for domestically produced goods, while protecting those industries from being forced out by more competitive pricing. It decreases unemployment and allowsdeveloping countries to shift from agricultural products to finished goods.Criticisms of this sort of protectionist strategy revolve around the cost of subsidizing the development of infant industries. If an industry develops without competition, it could wind up producing lower quality goods, and the subsidies required to keep the state-backed industry afloat could sap economic growth.4.National SecurityBarriers are also employed by developed countries to protect certain industries that are deemedstrategically important, such as those supporting national security. Defense industries are often viewed as vital to state interests, and often enjoy significant levels of protection. For example, while bothWestern Europe and the United States are industrialized, both are very protective of defense-oriented companies.5.RetaliationCountries may also set tariffs as a retaliation technique if they think that a trading partner has not played by the rules. For example, if France believes that the United States has allowed its wine producers to call its domestically produced sparkling wines "Champagne" (a name specific to the Champagne region of France) for too long, it may levy a tariff on imported meat from the United States. If the U.S. agrees to crack down on the improper labeling, France is likely to stop its retaliation. Retaliation can also beemployed if a trading partner goes against the government's foreign policy objectives.Types of Tariffs and Trade BarriersThere are several types of tariffs and barriers that a government can employ:∙Specific tariffs∙Ad valorem tariffs∙Licenses∙Import quotas∙Voluntary export restraints∙Local content requirementsSpecific TariffsA fixed fee levied on one unit of an imported good is referred to as a specific tariff. This tariff can vary according to the type of good imported. For example, a country could levy a $15 tariff on each pair of shoes imported, but levy a $300 tariff on each computer imported.Ad Valorem TariffsThe phrase ad valorem is Latin for "according to value", and this type of tariff is levied on a good based on a percentage of that good's value. An example of an ad valorem tariff would be a 15% tariff levied by Japan on U.S. automobiles. The 15% is a price increase on the value of the automobile, so a $10,000 vehicle now costs $11,500 to Japanese consumers. This price increase protects domestic producers from being undercut, but also keeps prices artificially high for Japanese car shoppers.Non-tariff barriers to trade include:LicensesA license is granted to a business by the government, and allows the business to import a certain type of good into the country. For example, there could be a restriction on imported cheese, and licenses would be granted to certain companies allowing them to act as importers. This creates a restriction on competition, and increases prices faced by consumers.Import QuotasAn import quota is a restriction placed on the amount of a particular good that can be imported. This sort of barrier is often associated with the issuance of licenses. For example, a country may place a quota on the volume of imported citrus fruit that is allowed.Voluntary Export Restraints (VER)This type of trade barrier is "voluntary" in that it is created by the exporting country rather than the importing one. A voluntary export restraint is usually levied at the behest of the importing country, and could be accompanied by a reciprocal VER. For example, Brazil could place a VER on the exportation of sugar to Canada, based on a request by Canada. Canada could then place a VER on the exportation of coal to Brazil. This increases the price of both coal and sugar, but protects the domestic industries.Local Content RequirementInstead of placing a quota on the number of goods that can be imported, the government can require that a certain percentage of a good be made domestically. The restriction can be a percentage of the good itself, or a percentage of the value of the good. For example, a restriction on the import of computers might say that 25% of the pieces used to make the computer are made domestically, or can say that 15% of the value of the good must come from domestically produced components.Who Benefits?The benefits of tariffs are uneven. Because a tariff is a tax, the government will see increased revenue as imports enter the domestic market. Domestic industries also benefit from a reduction in competition, since import prices are artificially inflated. Unfortunately for consumers - both individual consumers and businesses - higher import prices mean higher prices for goods. If the price of steel is inflated due to tariffs, individual consumers pay more for products using steel, and businesses pay more for steel that they use to make goods. In short, tariffs and trade barriers tend to be pro-producer and anti-consumer.The effect of tariffs and trade barriers on businesses, consumers and the government shifts over time. In the short run, higher prices for goods can reduce consumption by individual consumers and by businesses. During this time period, businesses will profit and the government will see an increase in revenue from duties. In the long term, businesses may see a decline in efficiency due to a lack of competition, and may also see a reductionin profits due to the emergence of substitutes for their products. For the government, the long-term effect of subsidies is an increase in the demand for public services, since increased prices, especially in foodstuffs, leave less disposable income.How Do Tariffs Affect Prices?Tariffs increase the prices of imported goods. Because of this, domestic producers are not forced to reduce their prices from increased competition, and domestic consumers are left paying higher prices as a result. Tariffs also reduce efficiencies by allowing companies that would not exist in a more competitive market to remain open.Tariffs and Modern TradeThe role tariffs play in international trade has declined in modern times. One of the primary reasons for the decline is the introduction of international organizations designed to improve free trade, such as the World Trade Organization (WTO). Such organizations make it more difficult for a country to levy tariffs and taxes on imported goods, and can reduce the likelihood of retaliatory taxes. Because of this, countries have shifted to non-tariff barriers, such as quotas and export restraints. Organizations like the WTO attempt to reduce production and consumption distortions created by tariffs. These distortions are the result of domestic producers making goods due to inflated prices, and consumers purchasing fewer goods because prices have increased. Since the 1930s, many developed countries have reduced tariffs and trade barriers, which has improved global integration and brought about globalization. Multilateral agreements between governments increase the likelihood of tariff reduction, while enforcement on binding agreements reduces uncertainty.The Bottom LineFree trade benefits consumers through increased choice and reduced prices, but because the global economy brings with it uncertainty, many governments impose tariffs and other trade barriers to protect industry. There is a delicate balance between the pursuit of efficiencies and the government's need to ensure low unemployment.。