钻井常用术语翻译
钻井常用术语翻译
钻井总论
钻井drilling
钻井方法drilling method
顿钻钻井cable drilling
杆式顿钻rod tool drilling
绳式顿钻cable tool drilling
轻便钻井portable drilling
直井straight hole
深井deep well
超深井super deep well
地热井geothermal well
热采井thermal production well
工程井engineering rejection well
工程报废井abandoned well
弃井abandoned well
钻井设计well design
钻井质量drilling quality
岩石的物理机械性质physical-mechanical properties of rock
矿物的微硬度micro-hardness of rook
肖氏岩石硬度Shores hardness
史氏岩石硬度Shi's hardness
矿物的弹性模量elastic modulus of mineral
岩石的弹性模量elastic modulus of rock
矿物的泊松比Poissons ratio mineral
岩石的泊松比Poissons ratio rock
矿物的切变模量shear modulus of mineral
岩石的切变模量shear modulus of rock
矿物和岩石的体积压缩模量bulk compressibility mineral and rock
岩石的体积压缩系数coefficient of bulk compressibility mineral and rock 岩石的抗拉伸强度tensile strength of rock
岩石的直接拉伸试验direct tensile test of rock
岩石的巴西劈裂拉伸实验Brazilian test of rock
岩石的筒形抗内压胀裂试验burst test of hollow cyling by internal pressure 岩石的常规抗压缩强度compressive strength of rock
岩石的抗剪切强度shear strength of rock
岩石的抗剪切强度试验shear test of rock
岩石的三轴强度试验tri-axial test of rock
岩石的常规三轴试验ordinary tri-axial test of rock
岩石的真三轴试验true tri-axial test of rock
脆性岩石brittle rock
塑性岩石plastic rock
岩石的假塑性破坏pseudo-plastic breakage of rock
岩石塑性系数coefficient of plasticity of rock
岩石的脆塑性转变压力(临界压力)brittle plastic transitional pressure of rock 岩石的库仑纳维尔强度准则Conlomb-Navier strength criterion of rock
岩石的内磨擦角和内磨擦系数angle of interal friction and coefficient of interal
friction of rock
岩石的莫尔强度准则Mohr strength criterion of rock
岩石的格里菲斯脆性破坏准则Griffith criterion of brittle failure of rock
统计强度理论statistical strength theory
岩石的表面破碎surface fracture of rock
岩石的疲劳破碎fatigue fracture of rock
岩石的体积破碎volumetric fracture of rock
岩石的单位体积破碎pecific volumetric fracture work of rock
地应力in situ stress
岩层的水平测向应力horizontal stress of strata
测向系数coefficient of lateral pressure
围压confining pressure
有效应力effective stress
压持效应chip hold effect
岩石硬度减低剂rock hardness reducer
岩石的可钻性drill ability of rock
岩石的研磨性rock abrasiveness
钻具drilling tool
钻柱drill stem
复合钻柱combination string
满眼钻柱packed hole assembly
踏式钻铤组合tapered drill collar string
钟摆钻具pendulum assembly
偏重钻铤unbalanced drill collar
钻柱弯曲buckling of drill string
钻具的扭转震动twisting vibration of drill string
钻杆疲劳破坏fatigue-failure of drill string
上紧矩make-up torque
应力减轻槽stress-relief groove
减震器vibration dampener
稳定器stabilizer
井眼大扩器reamer
钻井液drilling fluids
水基钻井液water-base drilling fluids
淡水钻井液fresh-water drilling fluids
低固相钻井液low solids fluids
低固相不分散钻井液low solids non-dispersed polymer drilling fluids
抑制性钻井液inhibitive drilling fluids
盐水钻井液salt-water drilling fluids
饱和盐水钻井液saturated salt-water drilling fluids
钙处理钻井液calcium treated drilling fluids
钾盐钻井液potassium drilling fluids
混油钻井液oil-emulsion drilling fluids
生物聚合物钻井液biodegrability drilling fluids
油基钻井液oil base drilling fluids
反相乳化钻井液invert-emulsion drilling fluids
平衡活度钻井液balanced activity drilling fluids
泡沫钻井液foam drilling fluids
密闭液sealing fluids
完井液completion fluids
封隔夜packer fluids
解卡浸泡液stuck freeing spotting fluids
钻井液性能properties of drilling fluids
滤失filtration
API滤失量API filtration
高温高压滤失量high temperature and high pressure filtration 动滤失量dynamic filtration
滤饼filter cake
含砂量sand content
钻井液固相含量solids content in drilling fluids
亚甲基兰实验methylene blue test
石灰含量lime content estimation
钻井液的酚酞碱度P m alkalinity
滤液酚酞碱度P t alkalinity
滤液甲基橙碱度M f alkalinity
造浆率yield
破乳电压emulsion-breaking voltage
钻井液流变性drilling fluids rheology
漏斗粘度funnel viscosity
触变性thixotropic behavior
静切力gel strength
初切力initial gel strength
终切力10-minuto gel strength
剪切降粘特性shear-thinning behavior
钻井液受污染contamination of drilling fluids
粘土侵clay contamination
盐侵salt contamination
盐水侵salt water contamination
钙侵calcium contamination
砂侵sand contamination
水侵water contamination
气侵gas contamination
钻井液处理剂mud additives
降失水剂filtrate or reduction agents
增粘剂thickening agent
膨润土增效剂agents of increasing bentonite
降粘剂thinning agents
加重剂weighting agents
堵漏剂lost circulation materials
水敏性页岩water-sensitive shale
膨润土的预水化pre-hydrated bentonite
固相控制solid control
钻屑cutting
砂sand
泥silt
胶体颗粒colloidal solids
钻进drilling
钻进技术drilling technology
钻进技术参数drilling parameters
钻压weight on bit
悬重和钻重string suspending weight and drilling weight 转速rpm-revolution per minute
排量rate of flow
零轴向点zero axial stress point
中性点neutral point
开钻spud in
完钻finishing drilling
送钻bit feed
方余和方入kelly-up and kelly-in
进尺footage
机械钻速penetration rate
鳖钻bit bouncing
跳钻bit jumping
干钻drilling at circulation break
打倒车reverse rotation table
钻头泥包bit balling
划眼redressing
扩眼reamin1
放空drilling break
吊打easing the bit in
纠斜hole straightening
侧钻sidetracking
单根single
双根double
立根stand
接单根king a connection
起下钻trips
知起下钻short tripping
活动钻具move the drill string
上卸扣make up and break out
换钻头change bit
鼠洞rat hole
小鼠洞mouse hole
喷射钻井jet-bit drilling
射流jet flow
冲击射流impact jet flow
汽蚀射流cavitation jet
射流扩散角和扩散系数spread angle and spread coefficient of jet
射流等速patential core of jet
漫流cross flow
射流喷速jet velocity
射流速度降低系数decreasing coefficient of jet velocity
射流动压力dynamic pressure of jet flow
射流压力降低系数coefficient of jet-flow pressure drop
射流冲击力jet impact force
射流水功率jet hydraulic-power
喷射距离jet length
清洗井底bottom-hole cleaning
钻头压降bit pressure-drop
钻头水功率bit hydraulic horse-power
喷嘴nozzle
等变速喷嘴nozzle with iso-variable velocity
流线形喷嘴streamline nozzle
喷嘴流量系数nozzle orifico coefficient
钻井液循环系统drilling fluids circulating system
钻井液流态flow pattern
平板层流flat plate laminar flow
Z值Z-value
喷射钻井的工作方式The working regime of jet drilling
最大钻头水功率工作方式The regime of the maximum bit hydra-ulic horse-power 最大射流冲击力方式the regime of the maximum jet-impact force
最大射流喷速工作方式The regime of the maximum jet velocity
经济水功率工作方式the regime of the economic hydraulic horse-power jet bit
喷射式钻头optimum rate of mud flow
最优喷嘴直径optimum nozzlo diameter
临界井深和极限井深critical well depth and limited well depth
钻井泵的工作状态the working regime of drilling pump
钻井泵的最大排工作状态(额定工作功率工作状态)the maximum flow rate regime of the drilling pump (the rated power regime of the drilling pump)
钻井泵的调节排量工作状态(允许压力工作状态)the regulated flow rate regime of the drilling pump(the rated power regime of the drilling pump)
携带岩屑cutting carrying
岩屑运移比cutting transport ratio
环空岩屑浓度solid concentration in annular space
钻井泵效率rate of utilized power of the drilling pump
钻井泵水功济利用率rate of utilized hydraulic power of the drilling pump
优化钻井技术optimum drilling technology
控制井control well
钻井可控参数controllable drilling variables
钻井不可控参数non controllable drilling variables
钻井目标函数(钻井泛函)objective function of drilling procedure
钻进过程的数学模型mathematical model for drilling procedure
钻速方程equation for drilling rate
二元钻速方程drilling rate equation in two variables
多元钻速方程multi-variable drilling rate equation
最大允许钻压maximum allowable weight on bit
最优钻压optimum weight on bit
钻速系数factor of penetration rate
地层研磨性系数factor of formation abrasiveness
牙齿磨损系数tooth wear coefficient
轴承工作系数working coefficient of bearing
五点法钻速试验“five spot” drill-off test
井下动力钻井hole bottom power drilling
涡轮钻井turbo-drilling
涡轮钻具turbo-drill
电动钻具electric drill
螺杆钻具positive displacement motor
涡轮工作特性characteristics of turbine
涡轮的水力载荷hydraulic load on turbo-drill
涡轮钻具井底工作特性hole-bottom working characteristics of turbo-drill
涡轮钻具最优工作区optimized working zone of turbo-drill
涡轮钻具合理转速optimum revolution of turbo-drill
涡轮钻具最优排量optimum capacity of turbo-drill
涡轮不稳定工作区unstable working range turbo-drill
有效钻压effective bit-weight
涡轮钻具井底功率传递系数transfer coefficient of bottom hole power of turbo-drill 涡轮钻具特性系数characteristic coefficient of turbo-drill
涡轮的水力效率hydraulic efficiency of turbo-drill
涡轮钻具合理钻进深度optimum drill depth of turbo-drill
涡轮-泵组联合特性combined characteristics of turbo-drill-pump
涡轮钻具轴向间隙的调节axial clearance regulation of turbo-drill
钻具滤清器drill pipe filter
启动阀starter gate valve
低速大扭矩涡轮钻具love-speed high-torque turbo-drill
复式涡轮钻具compound turbo-drill
定向井directional well
定向要素directional elements
井斜角inclination
方位角azimuth
井斜变化率rate of inclination change
方位变化率rate of azimuth change
井眼曲率hole curvature
垂深和测深vertical depth and measured
水平投影长度hole deviation
水平位移displacement or closure distance
多底井multi-bore well
水平井horizontal well
丛式井cluster well or multiple wells
救除井relief well
双筒井dual wells
套管开窗starting window on casing
造斜deflecting or building angle
增斜increasing hole angle or build-up hole angle 降斜decreasing hole angle or build-off hole angle 稳斜maintain angle
井身垂直投影图vertical projection of borehole
井身水平投影图horizontal projection of borehole 正切法tangential method
平衡正切法balanced tangential method
平均角法average angle method
曲率半径法radius of curvature method
圆弧法arc method
最小曲率法minimum curvature method
圆柱螺线法cylinder helix method
悬链线轨迹·catenary shape profile
控制圆柱control cylinder
造斜工具deflecting tool
槽式变向器whip-stock
短涡轮short turbo-drill
钻铤造斜短节short bent collar
涡轮偏心短节turbo-eccentric sub
复式弯涡轮bent multi-turbo-drill
水力斜接头hydraulic bent sub Dyna-flex
瓦片变向器rebel tool 造斜工具面tool face
造斜率rate of over-all angle change
井眼方位漂移walk of hole
装置角tool of rotation
工具面角tool face azimuth
动力钻具反扭角reactive torque
定向方位角tool face bearing or tool face setting 磁偏角magnetic declination
随钻测量measurement while drill(MWD)
单点测斜仪single shot instrument
多点测斜仪multi-shot instrument
陀螺测斜仪gyroscopic instrument
定向orientation
定向下钻orientation while going in hole
磁力定向法magnetic orientation method
斜口管鞋定向法mule-shoe orientation method
取心coring
岩心core
岩心收获率recovery of core
取心方法coring method
局部反循环取心coring with local inverse circulation 长筒取心core drilling with long core barrel
密闭取心sealing core drilling
保压取心core drilling with keeping formation pressure 定向取心orientation coring
绳索取心wire line coring
取心工具coring tools
岩心筒core barrel
单筒式岩心筒single type core barrel
双筒式岩心筒core barrel of double tube swivel type 内岩心筒inside core barrel
外岩心筒outside core barrel
喷射式岩心筒core barrel of jet type
取心钻头coring bit
牙轮取心钻头coring cone bit
金钢石取心钻头diamond coring bit
硬质合金取心钻头hard metal coring bit
涡轮取心钻头turbo-core bit
涡轮取心钻具turbo-core drill
岩心爪core gripper
卡瓦式岩心爪core gripper with slip
卡簧式岩心爪core gripper with slip-spring
板簧式岩心爪卡core gripper with slip-spider
箍式岩心爪core gripper with slip-collar
割取岩心core breaking
机械加压割心法core breaking by mechanical loading 投球割心core breaking by hydraulic pressure
投砂割心core breaking by pumping down
顶岩心core extracting
各种压力概念concept of pressure
静液压力hydrostatic pressure
钻井液压力drilling fluid column pressure
孔隙压力pore pressure (formation pressure)
上覆岩层压力overburden pressure
颗粒压力grain to grain pressure
压力梯度pressure gradient
压力监控pressure detection and control
异常压力及其形成abnormal pressure and it’s formation
压力异常abnormal pressure
压实作用compaction
欠压实imcompaction
不渗透围栅·permeabillity barrier
快速沉积rapid deposition
构造型异常高压structural abnormal pressure
地层压力检测方法method of formation pressure detection
地震资料法seismic data method
机械钻速法penetration rate method
d指数法d-exponent method dc
指数法dc-exponent method
标准化钻速法normalized penetration rate
页岩密度法shale density
溢流观测法take a kick
天然气录井检测法gas logging
氯化物检测法chloride log
钻井液录井法drilling fluid log
返出钻井液温度检测法flow-line temperature
化石资料法paleo-information
地球物理检测法wire-line logs
中途测试drill-stem testing
完井测试well completing test
综合录井仪computerlized apply drilling technology
地层破裂压力formation fracture pressure
地层破裂压力预报方法formation fracture pressure prediction 漏失试验法leak-off test
胡伯特-威利斯法Hubbert and Willis approach
马修斯-凯利法method of Matthews and Kelly
伊顿法method of Eaton
安德森法Anderson’s method
艾克斯劳格法Exlog method
黄荣樽法Huang’s method
地层井眼系统的压力平衡balance of formation-borehole system 地层压力当量钻井液密度equivalent drilling fluid density
钻井液当量循环密度equivalent circulating density
附加压力当量钻井液密度additional pressure equivalent density 当量深度equivalent depth
钻柱排代量drilling fluid displacement
波动压力(激动压力)surge pressure
抽汲压力swabbing pressure
气体上窜gas channeling
天然气偏差因子the coefficient of gas compressibility
溢流overflow
井涌kick
井喷well blowout
地下井喷underground blowout
井喷失控out of control for blowout
循环池液体增量pit gain
压力过渡带pressure transition zone
压井killing well
关井closing well
硬关井hard closing
软关井soft closing
压井方法killing well method
工程师法(等待加重量法)engineer’s method
司钻法(二次循环法)driller’s method
边加重边循环法concurrent method
空井压井empty well control
置换式压井法(顶部压井法)displacement method
反循环inverse circulating
循环周circulating circle
节流循环circulating with choke
防喷设备和工具blowout prevention tools and equipments
防溢管·bellnipple
钻井液流量计drilling fluid flowing indicator
泵冲数计pump-stroke counter
钻井液液面指示器pit-volume indicator
真空除气器·vacum degasser
硫化氢监测仪H2s detector
井控模拟装置well control simulator
井喷失控的处理well blowout control
抢装井口installing wellhead
扣装法抢装井口buckling-up-installing wellhead
翻转法抢装井口turning-up-installing wellhead
整体吊装法抢装井口whole hanging method for installing wellhead 带帽子压井法·hatting kill well method
下封隔器压井killing well with packer method
换井口套管casing replacing
灭火extinguishing
喷射水流灭火法jet fire extinguishing method
爆炸灭火法explosion method
灭火剂extinguisher
固井well cementing
套管程序casing program
导管conductor
表层套管surface casing
技术套管intermediate casing strings
生产套管production casing
套管柱casing string
套管柱下部结构casing accessories
引鞋guiding shoe
套管鞋casing shoe
套管扶正器centralizer
泥饼刷wall scratcher
浮籀float collar
套管承托环cement baffle collar
旋流短节vortex sub
浮鞋cementing float collar
水泥伞cementing basket
注水泥胶塞cementing plugs
通径规drift diameter gauge
套管的外载荷outside casing load
套管内压力burst
套管外挤压力collapse pressure
套管轴向力axial load
套管强度casing strength
套管抗挤强度collapse resistance
套管抗拉强度tensile resistance
套管抗内压强度burst resistance
下套管running casing
活动套管moving casing
预应力preceding stress
人工井底artificial bottom of a well
磁性定位短节magnetic locator sub
固井工具与设备tools and equipments for running casing and cementing 套管吊钳casing tong
套管吊卡casing elevator
卡盘casing spider
联顶节top connecting collar
水泥头connect head
水泥车connecting truck
井口装置wellhead equipment
注水泥?connect
油井水泥oil well connecting
低密度水泥light weight connect
膨润土水泥·bentonite connect
速凝水泥accelerated cement
膨胀水泥expansion cement
纤维质水泥fiber cement
树脂水泥(浆)resin cement
油基水泥(浆)diesel-oil cement
橡胶水泥(浆)latex cement
酸溶性水泥acid dissoluble cement
石膏水泥混合物·gypsam cement
火山灰水泥·pozzolan cement
抗盐水泥salt-resisting cement
双凝水泥浆separable setting cement slurry
冷井水泥和热井水泥ordinary and hot cement
API水泥分级API cement classification
水泥浆性能及其调节cement properties and adjustments of them
稠度仪consist-meter
水泥浆流动性mobility of slurry
水泥浆密度slurry density
水泥浆滤失量slurry filtration
出口温度井底温度和循环温度flow-line temperature bottom temperature and
circulation temperature
水泥浆失重losing weight slurry
水泥石强度cement strength
水泥石渗透性permeability of set cement
水泥石的射孔性perforating quality
水泥浆外加剂cement additive
速凝剂accelerator
缓凝剂retardant
减阻剂friction reducer
降密度剂light weight additive
降失水量filtrate reducer
水泥浆加重剂heavy weight additive
隔离液spacer fluid
前置液ahead fluid
尾随液tail fluid
注水泥方法cementing methods
常规注水泥法typical primary cementing
双级注水泥法two stage cementing
插入注水泥法inner pipe cementing
多管注水泥法multi-plezone completion cementing
打水泥塞cementing plug
平衡法打水泥塞balance method for cementing plug
倾筒法打水泥塞dump bailer method
挤水泥squeeze method
井口挤水泥法braden head squeeze method
封隔器挤水泥法squeeze packer method
高压挤水泥法high-pressure squeeze method
低压挤水泥法low-pressure squeeze method
尾管固井drilling liner cementing
尾管悬挂器drilling liner hanger
窜槽cement channeling
完井方法completion methods
裸眼完井法open hole completion
先期裸眼完井法initial open hole completion
后期裸眼完井法final open hole completion
射孔完井法perforation completion
单管射孔完井法single pipe perforation completion
多管射孔完井法multiple pipe perforation completion
无油管完井法·tubingless completion
永久完井法permanent completion
无封隔器单层永久完井法single pipe permanent completion without packer 单封隔器永久完井法permanent completion with single packer
封隔器射孔完井法permanent completion with packer
负压射孔perforating with negative pressure
过油管射孔perforating through tubing
贯眼完成法perforated pipe completion
衬管完井法liner perforation completion
砾石充填完井法gravel packer completion
深井完井法deep hole completion
高含硫气井完井法high H2s gas well completion
地层损害程度formation damage degree
地层损害带formation damage zone
水动力学程度不完善井hydrodynamic degree incompleteness well
水动力学性质不完善井油井hydrodynamic property incompletion well
完善系数well completeness factor
损害比damage ratio
趋肤效应shin effect
开采比production ratio
损害系数damage factor
完井系数completion factor
钻井设备drilling equipment
设备安装rig up
钻前工作preliminary work for spudding
井场布置layout
平井场levelling
圆井cellar
基础ground foundation base
活动基墩removable foundation
井架安装derrick installation
扒杆gin pole
井架安装绞车winch
穿钢丝绳string up
死绳固定器dead line anchor
设备校正alignment
井口找中center for well
整体搬迁skidding the rig
成组安装package installation
泥浆管汇mud pipeline
猫头绳cat-line
高悬猫头绳drill rope
大钳尾绳safety line
大门绷绳front guy(lines)
井架绷绳derrick guy
接链器chain spanner
钻井数据系统drilling data system
钻井数据采集装置drilling data acquisition
钻井数据实时处理装置drilling data processing
钻井数据库drilling data base
钻井信息drilling information
钻井参数传感装置drilling parameter sensing unit 指重表传感器weight sensor
进尺传感器drilling footage sensor
转盘扭矩传感器rotary table torque sensor
转盘转速传感器R.P.M sensor for rotary table
大钳扭矩传感器torque sensor for tong
泵速传感器pump rate sensor
钻井液密度传感器drilling fluid weight sensor
钻井液液面传感器mud pit level sensor
钻井液流动传感器drilling fluid flow sensor
钻井液温度传感器drilling fluid temperature sensor 钻井液电导传感器drilling fluid conductivity sensor 录井logging
钻井液录井drilling fluid logging
岩样录井·lithologic logging
气测录井gas-logging
钻速录井penetration rata logging
综合录井compound logging
巡回检测cyclic detection
泵压表pressure gage
钻具事故drilling pipe and tools accident
顿钻drill string free fall
溜钻drill string not well braked
断钻具drilling pipe breaking
落鱼fish
落物junks
打捞作业fishing
打捞筒overshot
打捞杯fishing cup
反循环打捞篮junk basket with reverse circulation
壁钩wall hook
铅印模lead stamp
一把抓catchall
铣鞋mill shoe
钻杆外割刀external cutter
活动肘节knuckle
倒扣捞矛left hand fishing spear
弯钻杆bend drill pipe
尖钻头tip bit
卡钻drill pipe sticking
砂桥卡钻sand bridging
键槽卡钻key seating
压差卡钻differential sticking
地层膨胀卡钻formation swelling sticking
地层坍塌卡钻formation collapse sticking
钻头泥包卡钻balling-up sticking
点sticking point
解卡工具releasing tools
震击器bumper
下击器bumper jar
上击器top jar
地面下击器surface bumper jar
千斤顶jack
爆炸松扣break-outing pack of dynamite
测卡仪sticking-point-instrument
解卡方法releasing method
震击解卡法releasing stuck tamping
油浴解卡法releasing stuck by pump oil into the annuls 酸浴解卡法releasing stuck by acidding
割铣解卡法releasing stuck by cutting
套铣解卡法milling and breakout
爆炸解卡法explosion releasing method
跳槽·netch jumping
粘扣thread gluing
滑扣thread slipping
脱扣thread off
错扣thread alternating
对扣make-up
造扣thread making
顶天车crashing into the crown
磨蚀钻井abrasive cutting drill
弹丸钻井bullet-shot drill
电火花钻井electric spark drill
超声波钻井supersonic wave drill
火焰钻井flame-jet drill
电加热钻井electric heating drill
原子能钻井atomic energy drill
电弧钻井electric arc drill
等离子钻井plasma jet drill
电子束钻井electron-beam drill
激光钻井laser drill
化学腐蚀钻井chemical erosion drill
钻井技术经济指标tech-economic indication of drilling
开钻井口数spudding well number
完钻井口数drilled well number
完成井口数completed well number
钻井进尺drilling footage
取心进尺coring footage
井身质量合格率well bore quality qualified ratio
油层固井合格率oil reservoir well quality qualified ratio
钻井工程报废drilling engineering abandonment
报废井段abandoned range
报废进尺abandoned footage
钻机利用率rate rig utilization
钻机台月rigs per unity month
建井周期台月construction cycle per unity month
纯钻井时间reciprocating time
钻机月速度monthly drilling rate
周期钻速periodic drilling rate
纯钻速rate of penetration
行程钻速drilling rate of a trip
建井周期construction cycle
完成井平均建井周期average construction of completed well 完成井平均井深average well depth of completed well
完成井平均进尺average bit drilling footage of completed well 钻井时效分析drilling prescription analysis
进尺工作时间footage working time
固井工作时间cementing working time
辅助工作时间service working time
事故损失时间accident losing time
修理时间repairing time
组织停工损失时间management down time loss
处理复杂情况时间problem handling time
生产时间率production per cent age
纯钻进时间率reciprocating time ratio
每钻机台月耗柴油量diesel consumption per rig-month 每钻机台月耗机油量oil consumption per rig-month
钻井工程成本cost of drilling engineering
酒店常用术语介绍
第一部分前厅常用术语介绍大厅服务处:Bell Service 金钥匙:Golde n Key 1.前厅岗位专业术语介绍 行政楼层:Executive Floor 房务部:Rooms Divisio n 行政酒廊:Executive Lounge 前厅部:Front Office 行李生:Bellman 客房部:Housekeep ing 迎宾员:Doorman 大堂副理:Assista nt Ma nager 夜审:End of Day /Night auditor 宾客关系主任:Guest Relation Officer 前台:Front Desk 2 ?前厅服务项目专业术语介绍 接待处:Receptio n/Check-in 入住:Check-in 收银处:Cashier/Check-out 退房:Check-out 领班:Capta in 夕卜币兑换:Foreig n Currency Excha nge 主管:Supervisor 问询:In formatio n 班次负责人:Shift Leader 接送机服务:Pick up service 商务中心:Bus in ess Center 叫醒服务:Wake up call 客房服务代表:Guest service agent(接 请勿打扰服务:DND Do not 待和收银合并之后的前台人员的称呼)简称 disturbed GSA 失物招领:Lost and Fou nd 电话总机:Switch Board 国内直拨和国际直拨电话: DDD and 接线员:Operator IDD (Domestic Dial and 预订处:Room Reservati on Intern ati onal Dial) Direct
钻井中英文对照
Electric heating cable 加热电缆 field development 油田开发 flexible riser 挠性隔水管 heating line 加热管线 ‘host’ platform “主”平台 ‘surface’ conductor “表层”导管 “dual bore” type tree “双筒”型采油树“temporary” guide base “临时”导向基座“two stack” approach “双防喷器组”法Abandonment and Recovery 弃置与回收acceptance criteria 验收标准 Acceptance Test 验收测试 accumulator bottle 蓄能器瓶 alignment 找正 alternating current 交流电 ambient seawater temperature 周围海水温度ambient temperature 环境温度 ancillary equipment 辅助设备 annular space 环形空间 annulus bore 环空孔 annulus master valve 环空主阀 annulus seal assembly 环空密封总成 anti-rotation pin 防旋转销 armour wire 铠装线 armours layer 铠装层 artificial lift 人工举升 artificial lift method 人工举升法 Asgard project Asgard项目 Atmospheric Diving Suit 常压潜水服atmospheric pressure 大气压力attachement point 固着点 Austenitic Stainless Steel 奥氏体不锈钢austenitic-ferric steel 奥氏体-铁素体钢 auto depth 自动定深 automatic connector 自动连接器 average unevenness height 平均不均匀高度axial tension 轴向拉力 backing steel 背钢 backup function 备份功能 barrier coating 防护涂层 barrier protection 隔层保护 basic oxygen furnace 碱性氧气转炉 basket storage carousel 篮式存管盘 bend limiter 弯曲限幅器
土力学词汇英文翻译
土力学词汇英汉对照 编写人:邵俐 审核人:刘松玉、张克恭 东南大学交通学院 二00五年三月
A absorbed water 吸着水 accumulation sedimentation method 累积沉淀法 active earth pressure主动土压力E a activity index 活性指数A adamic earth,red soil 红粘土 additional stress(pressure)of subsoil 地基附加应力(压力)σ z adverse geologic phenomena 不良地质现象aeolian soils 风积土 aeolotropic soil 各向异性土 air dried soils 风干土 allowable subsoil bearing capacity 地基容许承载力[σ0] allowable settlement 容许沉降 alluvial soil 冲积土 angle between failure plane and major principal plane破坏面与大主平面的夹角 angle of internal,external (wall) friction 内摩擦角?、外(墙背)摩擦角 angular gravel,angular pebble 角砾anisotropic soil 各向异性土 aquifer 含水层 aquifuge,impermeabler layer 不透水层 area of foundation base 基础底面面积A artesian water head 承压水头 artificial fills 人工填土 artificial foundation 人工地基 Atterberg Limits 阿太堡界限 attitude 产状 average consolidation pressure 平均固结压力 σ average heaving ratio of frozen soil layer 冻土层的平均冻胀率η average pressure ,additional pressure of foundation base 基底平均压力、平均附加压力p、p0B base tilt factor of foundation 基础倾斜系数b c、b q、bγ base tilt factors基底倾斜系数b c、b q、bγ bearing capacity 承载力 bearing capacity factors 承载力系数N c,、N q,、Nγ [California]Bearing Ratio [CBR] 承载比 bearing stratum 持力层 bedrock,original rock 基岩 beginning hydraulic gradient 起始水力梯度(坡降)i o Biot consolidation theory 比奥固结理论 Bishop’s slice method 比肖普条分法 bound water 结合水(束缚水) boulder 漂石 Boussinesq theory 布辛奈斯克理论 bridge 桥梁 bridge pier 桥墩 broken stone,crushed stone 碎石 bulk modulus 体积模量 buried depth of foundation 基础埋置深度d buoyant density 浮密度ρ' buoyant gravity density(unit weight) 浮重度(容重)γ’ C California Bearing Ratio(CBR)加州承载比 capillary rise 毛细水上升高度 capillary water 毛细(管)水 categorization of geotechnical projects 岩土工程分级 cementation 胶结作用 central load 中心荷载(轴心荷载) characteristic value of subsoil bearing capacity 地基承载力特征值f ak chemical grouting 化学灌浆 circular footing圆形基础 clay 粘土 clay content 粘粒含量 clay minerals 粘土矿物
钻井常用术语
2、井口:井的开口端。 3、井底:井的底端。 4、裸眼:未下套管部分的井段。 5、井深:从转盘补心面至井底的深度。 6、井壁:井眼的圆柱形表面。 7、环空:井中下有管柱时,井壁与管柱或管柱与管柱之间的圆环形截面的柱状空间。 8、井眼轴线:井眼的中心线。 9、井身结构:指的是钻头钻深、相应井段的钻头直径、下入的套管层数、直径及深度、各层套管外的水泥返高以及人工井底等。 10、人工井底:设计的最下部油层下的阻流环或水泥塞面。(注:该定义不全面,人工井底是可变的) 11、井的类别:按一定依据划分的井的总类。按钻井的目的可分为探井和开发井等;按完钻后的井深可分为浅井(<1200m)、中深井(1200~3000m)、深井(3000~5000m)和超深井(>5000m);按井眼轴线形状可分为直井和定向井。 . 12、探井:指以了解地层的时代、岩性、厚度、生储盖的组合和区域地质构造,地质剖面局部构造为目的,或在确定的有利圈闭上和已发现油气的圈闭上,以发现油气藏、进一步探明含油气边界和储量以及了解油气层结构为目的所钻的各种井,包括地层探井、预探井、详探井和地质浅井。 13、开发井:指为开发油气田所钻的各种采油采气井、注水注气井,或在已开发油气田内,为保持一定的产量并研究开发过程中地下情况的变化所钻的调整井、补充井、扩边井、检查资料井等。 14、直井:井眼轴线大体沿铅垂方向,其井斜角、井底水平位移和全角变化率均在限定范围内的井。 15、定向井:沿着预先设计的井眼轨道,按既定的方向偏离井口垂线一定距离,钻达目标的井。 16、丛式井:在一个井场上或一个钻井平台上,有计划地钻出两口或两口以上的定向井(可含一口直井)。 17、救援井:为抢救某一口井喷、着火的井而设计、施工的定向井。 18、多底井:一个井口下面有两个或两个以上井底的定向井。 19、大斜度井:最大井斜角在60°~86°的定向井。 20、水平井:井斜角大于或等于86°,并保持这种角度钻完一定长度的水平段的定向井。 21、钻井工序:指钻井工艺过程的各个组成部分。一般包括钻前准备、钻进、取心、中途测试、测井、固井和完井等。 22、套补距:套管头上端面与转盘补心面之间的距离。 23、油补距:油管头上端面与转盘补心面之间的距离。 24、井场:钻井施工必需的作业场地。 25、圆井:为便于安装井控装置开挖的圆或方形井。 26、小鼠洞:位于井口的正前方,用于预先放置钻杆单根的洞,以加快接单根操作。 27、(大)鼠洞:当不使用方钻杆而从大钩上卸下时,用于放置方钻杆和水龙头的洞,位于钻台左前方井架大腿与井口的连线上。 28、钻台:装于井架底座上,作为钻工作业的场所。 29、钻具:井下钻井工具的简称。一般来说,它是指方钻杆、钻杆、钻铤、接头、稳定器、井眼扩大器、减振器、钻头以及其它井下工具等。 30、方钻杆:用高级合金钢制成的,截面外形呈四方形或六方形而内为圆孔的厚壁管子。两端有连接螺纹。主要用于传递扭矩和承受钻柱的重量。 31、钻杆:用高级合金钢制成的无缝钢管。两端有接头。用于加深井眼,传递扭矩,并形成钻井液循环的通道。可分为内平钻杆、管眼钻杆和正规钻杆。 ) 32、钻铤:用高级合金钢制成的厚壁无缝钢管。两端有连接螺纹,其壁厚一般为钻杆的4~6倍。主要用作给钻头施加钻压,传递扭矩,并形成钻井液循环的通道。 33、接头:用以连接、保护钻具的短节。 34、钻具组合(钻具配合):指组成一口井钻柱的各钻井工具的选择和连接。 35、下部钻具组合:指最下部一段钻柱的组成。 36、钻柱:是指自水龙头以下钻头以上钻具管串的总称。由方钻杆、钻杆、钻铤、接头、稳定器等钻具所组成。 37、(刚性)满眼钻具:由外径接近于钻头直径的多个稳定器和大尺寸钻铤组成的下部钻具组合。用于防斜稳斜。 38、塔式钻具:由直径不同的几种钻铤组成的上小下大的下部钻具组合。用于防止井斜。 39、钟摆钻具:在已斜井眼中,钻头以上,切点以下的一段钻铤犹如一个“钟摆”,钻头在这段钻铤的重力的横
灯光常用术语介绍
灯光术语 Ampres- (“Amps”) 测量电流的单位(安培)。对于白炽灯,电流和电压与功率的关系如下: 电流(安培)=功率(瓦特)/ 电压(伏) 平均寿命-从开始使用一组灯泡到这组灯泡中剩下50%仍然在工作的这段时间叫做平均寿 命,用小时数来表示。 镇流器- 设计用来启动和控制输入气体放电光源的功率的辅助性设备。 光束角度- 锥形光束由装有反射器的灯具中射出,截止到最大亮度的50%的锥形光束所成角度即为光束角度。光束角度有时也叫做“beam spread”。它时常是装了反射器的灯具的 订货型号。 堪- 国际光强单位,单位为烛光。这个术语沿用自早期,用固定尺寸和位置作为基础来衡量光源的强度。有时也用“烛光(candle power)”来描述光源的相对的强度。 烛光- 发光强度,用堪来表示。为描述装有反光碗灯具的光强分布特性,用“烛光强度分布曲线”以数学的方式来衡量流明。烛光常常被用来衡量投射灯光的强度。 色度- 也叫色温。 色- 颜色渲染也是专业灯光系统中的一个要素。随着灯光技术的发展,获得更好的颜色渲染而不牺牲发光效率的能力也得到了巨大改善。 色温- 最初这个词是指白炽灯光的“白度”。白炽灯丝的物理温度直接和色温相关,所以“开氏(Kelvin)”温标被用来描述色温。为了不牵涉到灯丝温度,“关联式色温”被采用,它假定放电灯泡是在一个给定的色温下工作。最近,“色度”代替了“色温”。几个典型的色温为:2800K(白炽灯),3000K(卤素灯),4100K(冷白或Sp41荧光)和5000K (模拟阳光)。 发光效率- 发光效率灯具把电功率(瓦特)转换为灯光(流明)的比率,即流明/ 瓦特(LPW)。简单来说,瓦特或电力是输入的值,流明或灯光是输出的值。发光效率对于评价灯光设备是一个重要的考虑,因为灯光占一个常规灯光系统总运行成本的30%到50%,
钻井英语教材(修改版)
钻井英语
目录 第一节钻井英语单词 (3) 第二节井场用语,钻井常用短语及句子 (12) 第三节钻井泥浆术语 (31) 第四节常用安全术语 (33) 第五节钻井设备英语 (35) 第六节石油钻井英语情景会话 (42) 附录一:平台人员、作业者及服务公司人员名称 (49) 附录二:主要设备名称 (50) 附录三:钻具、井口工具、打捞工具名称 (54) 附录四:材料和工具名称 (55) 附录五:常用缩写形式 (57)
第一节钻井英语单词 drilling crew 钻井队 drill floor,rig floor,floor 钻台drawworks 绞车 well-site, rig-site 井场 rig manager 平台经理 DC (drill collar) 钻铤 drilling engineer 钻井工程师 DP (drill pipe) 钻杆 toolpusher 带班队长 rotary table 转盘 driller 司钻 assistant driller 副司钻derrickman, monkeyman 井架工roughneck, floorman 钻工roustabout 场地工 liner 缸套 motor fire man 司机(motorman)wellhead 井口 circulation & solid system 循环固控系统 machinist 机械师,机工,机械大班electrician 电器师,电工,电器大班operation program 作业程序(指令) cathead 猫头 caravan 营房,大篷车 tong 大钳 elevator 吊卡 well depth 井深 slip 卡瓦makeup 上扣 spud in 开钻 breakout 卸扣 ROP (rate of penetration),drilling speed, penetration rate 钻速 trip 起下钻 diesel-engine 柴油机 loss circulation 井漏,循环漏失working uniform 工作服 brake handle, brake bar 刹把 water well condition 水井井况circulating tank, circulation tank 循环罐 normal drilling 正常钻进 reserve tank 储备罐 parameter 参数 trip tank 补给罐,尖底罐, 起下钻泥浆罐(起下钻计量罐) rotary speed 转盘转速(转速)shale shaker 振动筛 pump pressure 泵压 WOB (weight on bit) 钻压 mesh 目,网孔;啮合,编织 torque 扭矩 screen cloth 筛布 displacement 排量 safety meeting 班前会 pump stroke 泵冲 shift exchange 交班、(倒班)
个人简历常用术语
个人简历常用术语一、个人资料 姓名name 别名alias 笔名pen name 出生日期date of birth; birth date 出生于born 出生地点birth place 年龄age 籍贯native place 省province 市city 自治区autonomous region 专区prefecture 县county 民族,国籍nationality 国籍citizenship 双重国籍duel citizenship 地址address 目前地址current address; present address
永久地址(家庭地址)permanent address 邮政编码postal code 住宅home phone 办公office phone; business phone Tel. 性别sex 男male 女female 身高height 体重weight 婚姻状况marital status 家庭状况family status 已婚married 未婚single; unmarried 分居separated 子女的数number of children 无none 街street 胡同,巷, 弄lane 路road 区district 门牌door number; house number
健康状况health; health condition 血型blood type 近视short-sighted 远视far-sighted 色盲color-blind 身份证号码ID card No. 可到职时刻date of availability 可到职available 会员,资格membership 学会society 协会association 研究会research society 二、描述工作经历、能力、奉献 accomplish 完成(任务等)achievements 工作成就,业绩adapted to 适应于 adept in 善于 administer 治理 advanced worker 先进工作者analyze 分析
钻井英文词汇表
顶驱&钻井英文常用词汇表 (第一版) 盘锦辽河油田天意石油装备有限公司 2010年9月
一、顶驱英文 顶部驱动系统Top drive system 车载钻机truck-mounted rig 机械的mechanical 电学的electrical 液压的hydraulic 钻井设备drilling equipment 大斜度井high-inclination well 深井deep well 丛式定向钻井cluster directional well 低温顶驱low-temperature top drive system 超深井ultra-deep well 定向井directional well 载荷load capacity 工作高度working height 电动机motor 功率power 转速rotary speed 钻井扭矩drilling torque 过载能力over load capacity 卸扣break out 上扣make-up 循环压力circulation pressure 额定压力rated pressure 电源电压power voltage 电源频率power frequency 工作电流working current 通风机ventilator 接线箱junction box 平衡油缸counterbalance cylinder 盘式刹车disc brake 电缆接插件cable connector assembly 主电机main motor 液压阀组hydraulic valve block 提环bail 鹅颈管gooseneck 油箱tank 蓄能器accumulator 齿轮箱gearbox 冲管总成wash pipe assembly 液压马达hydraulic motor 回转头rotating head 导轨guide beam 倾斜油缸tilt cylinder 防松法兰lock flange 背钳back-up tong 导向器stabbing guide 遥控IBOP upper IBOP 手动IBOP lower IBOP 吊环link 吊卡elevator 齿轮轴gear shaft 冷却风机Cooling motor 交流电机 AC motor 水龙头 Swivel 主齿轮 Driving gear 编码器 Encoder 散热器 Radiator 油道 Oil passage 密封槽Seal groove 轴承 bearing 滚轮 Roller 滑套 IBOP actuator shell 曲柄 Crank 销pin 钳牙tongdies 活塞piston 螺栓bolt 黄油grease 小车总成 Carriage accessory 气流 Air current 风道 Air duct 进风口 Air inlet 出风口 Air outlet 梨型环 Pear link 卡箍clamping band 键key
钻井工程常用名词术语
钻井工程常用名词术语 钻井总论 钻井drilling 钻井方法drilling method 顿钻钻井cable drilling 杆式顿钻rod tool drilling 绳式顿钻cable tool drilling 轻便钻井portable drilling 直井straight hole 深井deep well 超深井super deep well 地热井geothermal well 热采井thermal production well 工程井engineering rejection well 工程报废井abandoned well 弃井abandoned well 钻井设计well design 钻井质量drilling quality 岩石的物理机械性质physical-mechanical properties of rock 矿物的微硬度micro-hardness of rook 肖氏岩石硬度Shores hardness 史氏岩石硬度Shi's hardness 矿物的弹性模量elastic modulus of mineral 岩石的弹性模量elastic modulus of rock 矿物的泊松比Poissons ratio mineral 岩石的泊松比Poissons ratio rock 矿物的切变模量shear modulus of mineral 岩石的切变模量shear modulus of rock 矿物和岩石的体积压缩模量bulk compressibility mineral and rock 岩石的体积压缩系数coefficient of bulk compressibility mineral and rock 岩石的抗拉伸强度tensile strength of rock 岩石的直接拉伸试验direct tensile test of rock 岩石的巴西劈裂拉伸实验Brazilian test of rock 岩石的筒形抗内压胀裂试验burst test of hollow cyling by internal pressure 岩石的常规抗压缩强度compressive strength of rock 岩石的抗剪切强度shear strength of rock 岩石的抗剪切强度试验shear test of rock 岩石的三轴强度试验tri-axial test of rock 岩石的常规三轴试验ordinary tri-axial test of rock 岩石的真三轴试验true tri-axial test of rock 脆性岩石brittle rock 塑性岩石plastic rock 岩石的假塑性破坏pseudo-plastic breakage of rock 岩石塑性系数coefficient of plasticity of rock
摄像头常用术语介绍
摄像头常用术语介绍 智赛公司在培训的过程中,经常碰到业务员提到一些关于摄像头的术语,讲了几次还不知道是什么意思,而且还是英文的,今天我就给大家介绍一下在摄像头中常见的术语!并记录如下: 1. 像素大小(Pixel Size)︰指个别感应像素的实际尺寸大小,不论是长或宽,都以μm(Micrometer)为计量单位。像素愈大,则所需曝光成像时间较短,但却会牺牲些许空间分辨率。反之,像素愈小,则需较久的曝光成像时间,成像之后的影像分辨率,则较好。 2. AE(Auto Exposure)︰结合AGC及IRIS马达控制的使用,使摄影机能在很宽广的光线条件下使用。AGC能在很低亮度的条件下放大视讯信号,而IRIS能在高亮度下降低光线进入摄影机,马达光圈控制能被CCD IRIS控制所取代。 3. AGC (Automatic Gain Control)︰一种电路能自动地调整视讯信号的电子放大,来补偿因照明亮度位阶的改变。 4. Aspect Ratio︰表示影像的长宽比例,标准TV影像是4:3,宽视野是16:9。 5. ATW(Auto Tracking White Balance) ︰在ATW模式下,白平衡会依被照体的色温不同一直被连续调整。 6. Backlight Compensation︰在AE模式下的一种特别补偿功能。当背景太亮或是物体太暗时背光补偿功能就会去修改自动曝光的动作使得物体更清晰。 7. Bayonet Mount︰一种摄影机的mount,介于镜头后面mounting面和摄影机的CCD面的距离: 有38mm 或48mm。 8. C-mount︰一种摄影机的mount,在镜头后面mounting面到摄影机的CCD面距离为17.526mm是聚焦清楚的。 9. CCD (Charge Coupled Devices) ︰个别光感应组件(称为Pixels)组合成矩阵或线形式的半导体装置,光学镜头把影像聚在此Sensor上,每一个Pixels累积和光成正比的电荷,然后传送读出。输出矩阵大小是感光元矩阵的一半就是interlace模式CCD,如是相同大小就是Progressive Scan CCD。 https://www.360docs.net/doc/e414685677.html,D IRIS︰CCD Camera的电子快门的特别操作模式。快门Timing自动调整来维持相同视讯输出准位会降低摄影机Sensitivity。可使固定光圈镜头应用在光线变化环境下,常会和AGC功能一起使用。 11. EIA(Electronics Industries Association)︰黑白视讯标准,每个Frame有525条线及2个交错图场,每秒有30 Frames。NTSC的黑白版本常以RS-170 表示。 https://www.360docs.net/doc/e414685677.html,IR︰欧规黑白标准视讯信号,每个Frame有625条扫瞄线及2个交错图场,每秒有25
Dwgzmyc水文地质术语及英文翻译
七夕,古今诗人惯咏星月与悲情。吾生虽晚,世态炎凉却已看透矣。情也成空,且作“挥手袖底风”罢。是夜,窗外风雨如晦,吾独坐陋室,听一曲《尘缘》,合成诗韵一首,觉放诸古今,亦独有风韵也。乃书于纸上。毕而卧。凄然入梦。乙酉年七月初七。 -----啸之记。 UDC 556 GBD 10 中华人民共和国国家标准 GB/T 14157—93 水文地质术语 Hydrogeologic terminology 1993-02-12 发布1993-11-01实施 国家技术监督局发布 目次 1 主题内容与适用范围 2 2 引用标准 2 3 水文地质学原理 2 4 地下水动力学 9 5 水文地球化学 21 6 水文地质勘查方法 28 7 地下水资源评价及开发利用 37 8 矿床水文地质 49 9 环境水文地质 54 10 矿水及地下热水 58 11 土壤改良水文地质 60 中华人民共和国国家标准 GB/T 14157—93 水文地质术语 Hydrogeologic terminology 1 主题内容与适用范围 本标准包括水文地质学原理、地下水动力学、水文地球化学、水文地质勘查方法、地下水资源评价及开发利用、矿床水文地质、环境水文地质、矿水及地下热水、土壤改良水文地质常用的术语。 本标准适用于水文地质的勘查、设计、成果报告、规程规范、管理、科研、教学及国际交流等方面。 2 引用标准 GB 9151 钻探工程名词术语
GBl2329 岩溶地质术语 3 水文地质学原理 3.1 水文地质学科分类 3.1.1 水文地质学hydrogeology 研究地下水的形成和分布、物理及化学性质、运动规律、开发利用和保护的科学。 3.1.2 水文地质学原理(普通水文地质学)principles of hydrogeology(general hydrogeology) 研究水文地质学的基础理论和基本概念的学科。 3.1.3 地下水动力学groundwater dynamics 研究地下水在岩土中运动规律的学科。 3.1.4 水文地球化学hydrogeochemistry 研究地下水化学成分的形成和变化规律以及地下水地球化学作用的学科。 3.1.5 专门水文地质学applied hydrogeology 为各种应用而进行的地下水调查、勘探、评价及开发利用的学科。 3.1.5.1 供水水文地质学water supply hydrogeology 为各种目的供水,研究地下水的形成条件、赋存规律、勘查方法、水质、水量评价以及合理开发利用和管理的学科。 3.1.5.2 矿床水文地质学mine hydrogeology 研究矿床水文地质学理论、勘探方法及开采中有关水文地质问题的学科。 3.1.5.3 土壤改良水文地质学reclamation hydrogeology 研究土壤盐渍化及沼泽化等水文地质问题的学科。 3.1.5.4 环境水文地质学environmental hydrogeology 研究自然环境中地下水与环境及人类活动的相互关系及其作用结果,并对地下水与环境进行保护、控制和改造的学科。 3.1.5.5 同位素水文地质学isotopic hydrogeology 应用同位素方法解决水文地质问题的学科。 3.1.6 区域水文地质学regional hydrogeology 研究地下水埋藏、分布、形成条件及含水层的区域性规律的学科。 3.1.7 古水文地质学pa1eohydrogeology 研究地质历史时期中地下水的形成、分布和演变的学科。 3.2 自然界的水循环 3.2.1 水循环water cycle 地球上各种形式的水体相互转换的循环过程。 3.2.2 大气圈aerosphere 包围地球表壳的气层。 3.2.3 水圈hydrosphere 连续包围地球表层的水体和地壳岩石中的水的总称。 3.2.4 岩石圈lithosphere 地球第一个软流层以上的部分。 3.2. 4.1 包气带aeration zone 地表面与地下水面之间与大气相通的,含有气体的地带。 3.2. 4.2 毛细带capillary zone 由于岩层毛细管力的作用,在潜水面以上形成的一个与饱水带有直接水力联系的接近饱和的地带。
钻井常用术语
1、井:以勘探开发石油和天然气为目的的,在地层中钻出的具有一定深度的圆柱形孔眼。 2、井口:井的开口端。 3、井底:井的底端。 4、裸眼:未下套管部分的井段。 5、井深:从转盘补心面至井底的深度。 6、井壁:井眼的圆柱形表面。 7、环空:井中下有管柱时,井壁与管柱或管柱与管柱之间的圆环形截面的柱状空间。 8、井眼轴线:井眼的中心线。 9、井身结构:指的是钻头钻深、相应井段的钻头直径、下入的套管层数、直径及深度、各层套管外的水泥返高以及人工井底等。 10、人工井底:设计的最下部油层下的阻流环或水泥塞面。(注:该定义不全面,人工井底是可变的) 11、井的类别:按一定依据划分的井的总类。按钻井的目的可分为探井和开发井等;按完钻后的井深可分为浅井(<1200m)、中深井(1200~3000m)、深井(3000~5000m)和超深井(>5000m);按井眼轴线形状可分为直井和定向井。 . 12、探井:指以了解地层的时代、岩性、厚度、生储盖的组合和区域地质构造,地质剖面局部构造为目的,或在确定的有利圈闭上和已发现油气的圈闭上,以发现油气藏、进一步探明含油气边界和储量以及了解油气层结构为目的所钻的各种井,包括地层探井、预探井、详探井和地质浅井。 13、开发井:指为开发油气田所钻的各种采油采气井、注水注气井,或在已开发油气田内,为保持一定的产量并研究开发过程中地下情况的变化所钻的调整井、补充井、扩边井、检查资料井等。 14、直井:井眼轴线大体沿铅垂方向,其井斜角、井底水平位移和全角变化率均在限定范围内的井。 15、定向井:沿着预先设计的井眼轨道,按既定的方向偏离井口垂线一定距离,钻达目标的井。 16、丛式井:在一个井场上或一个钻井平台上,有计划地钻出两口或两口以上的定向井(可含一口直井)。 17、救援井:为抢救某一口井喷、着火的井而设计、施工的定向井。 18、多底井:一个井口下面有两个或两个以上井底的定向井。 19、大斜度井:最大井斜角在60°~86°的定向井。 20、水平井:井斜角大于或等于86°,并保持这种角度钻完一定长度的水平段的定向井。 21、钻井工序:指钻井工艺过程的各个组成部分。一般包括钻前准备、钻进、取心、中途测试、测井、固井和完井等。 22、套补距:套管头上端面与转盘补心面之间的距离。 23、油补距:油管头上端面与转盘补心面之间的距离。 24、井场:钻井施工必需的作业场地。 25、圆井:为便于安装井控装置开挖的圆或方形井。 26、小鼠洞:位于井口的正前方,用于预先放置钻杆单根的洞,以加快接单根操作。 27、(大)鼠洞:当不使用方钻杆而从大钩上卸下时,用于放置方钻杆和水龙头的洞,位于钻台左前方井架大腿与井口的连线上。 28、钻台:装于井架底座上,作为钻工作业的场所。 29、钻具:井下钻井工具的简称。一般来说,它是指方钻杆、钻杆、钻铤、接头、稳定器、井眼扩大器、减振器、钻头以及其它井下工具等。 30、方钻杆:用高级合金钢制成的,截面外形呈四方形或六方形而内为圆孔的厚壁管子。两端有连接螺纹。主要用于传递扭矩和承受钻柱的重量。 31、钻杆:用高级合金钢制成的无缝钢管。两端有接头。用于加深井眼,传递扭矩,并形成钻井液循环的通道。可分为内平钻杆、管眼钻杆和正规钻杆。) 32、钻铤:用高级合金钢制成的厚壁无缝钢管。两端有连接螺纹,其壁厚一般为钻杆的4~6倍。主要用作给钻头施加钻压,传递扭矩,并形成钻井液循环的通道。 33、接头:用以连接、保护钻具的短节。 34、钻具组合(钻具配合):指组成一口井钻柱的各钻井工具的选择和连接。 35、下部钻具组合:指最下部一段钻柱的组成。 36、钻柱:是指自水龙头以下钻头以上钻具管串的总称。由方钻杆、钻杆、钻铤、接头、稳定器等钻具所组成。 37、(刚性)满眼钻具:由外径接近于钻头直径的多个稳定器和大尺寸钻铤组成的下部钻具组合。用于防斜稳斜。 38、塔式钻具:由直径不同的几种钻铤组成的上小下大的下部钻具组合。用于防止井斜。
常用专业术语介绍
1. 开盘价:当天的第一笔交易成交价格 2. 收盘价:当天的最后一笔交易成交价格 3. 最高盘价:当天的最高成交价格 4. 最低盘价:当天的最低成交价格 5.高开:今日开盘价在昨日收盘价之上 6. 平开:今日开盘价与昨日收盘价持平 7. 低开:今日开盘价在昨日收盘价之下 8.“T+1”交易(股票),T+0(黄金)(“T”表示交易,“T+1”表示交易日第二天,“T+1”交易制度指投资者当天买入的证券不能在当天卖出,需待第二天可以卖出). 9.空头、卖空、作空 交易预期未来黄金市场的价格将下跌,即按目前市场价格卖出一定数量的黄金或期权合约,等价格下跌后再补进以了结头寸,从而获取高价卖出、低价买进的差额利润,这种方式属于先卖后买的交易方式。 10.多头、买入、作多 交易者预期未来黄金市场价格将上涨,以目前的价格买进一定数量的黄金,待一段时价格上涨后,以较高价格对冲所持合约部位,从而赚取利润。这种方式属于先买后卖交易方式,正好与空头相反。
11.平仓 通过卖出(买进)相同的黄金来了结先前所买进(卖出)的黄金。 12.保证金 以保证合同的履行和交易损失时的担保,客户履约后退还,如有亏损从保证金内相应扣除。 13.波幅:金价在一天之中振荡的幅度 14.止损:比如作空头方向于黄金市场卖完后,金价不跌反涨,逼得空头不得不强补买回 15. 止盈:与止损意思相反 16利好消息:是刺激价格上涨,对多头有利的因素和消息。 17.利空消息:是促使价格下跌,对空头有利的因素和消息。 18.市价建仓和市价平仓:市价建仓就是以当时市场波动的价做多或做空,平仓也是一样 19.点差:天通金市双向报价即报买入价也报卖出价,两者之间的差以点数报出,两者之间的差就叫点差,天通金的点差是8个点 20.止盈和止损:止盈就是你计划盈利多少,如10%、20%或30%,当行情涨到这个点位时就自动卖出,以后再涨多少也不管它了,止损就是行情跌到你能够承受的最低价位时,就断然卖出,即停
[考试]Jvevpo水文地质术语及英文翻译技巧归纳.doc
秋风清,秋月明,落叶聚还散,寒鸦栖复惊。 水文地质术语 Hydrogeologic terminology 1993-02-12 发布 1993-11-01 实施 国家技术监督局发布 目次 1 主题内容与适川范围 2 2 引用标准 2 3 水文地质学原理 2 4 地卞水动力学 9 5 水文地球化学 21 6 水文地质勘查方法 28 7 地下水资源评价及开发利用 37 8 矿床水文地质 49 9 环境水文地质 54 10 矿水及地下热水 58 11 土壤改良水文地质 60 中华人民共和国国家标准 GB/T 14157—93 水文地质术语 Hydrogeologic terminology 1主题内容与适用范围 本标准包括水文地质学原理、地下水动力学、水文地球化学、水文地质勘查方法、地下水资 源评价及开发利用、矿床水文地质、环境水文地质、矿水及地下热水、土壤改良水文地质常 用的术语。 UDC 556 中华人民共和国国家标准 GBD 10 GB/T 14157—93
木标准适用于水文地质的勘杳、设计、成果报告、规程规范、管理、科研、教学及国际交流等方面。 2引用标准 GB 9151钻探工程名词术语 GB12329岩溶地质术语 3水文地质学原理 3.1水文地质学科分类 3.1. 1 水文地质学hydrogeology 研究地下水的形成和分布、物理及化学性质、运动规律、开发利用和保护的科学。 3.1. 2水文地质学原理(普通水文地质学)principles of hydrogeology (general hydrogeology) 研究水文地质学的基础理论和基木概念的学科。 3.1. 3 地卜水动力学groundwater dynamics 研究地下水在岩土中运动规律的学科。 3.1. 4 水文地球化学hydrogeochemistry 研究地下水化学成分的形成和变化规律以及地下水地球化学作用的学科。 3.1. 5 专门水文地质学applied hydrogeology 为各种应用而进行的地下水调查、勘探、评价及开发利用的学科。 3.1. 5. 1 供水水文地质学water supply hydrogeology 为各种目的供水,研究地下水的形成条件、赋存规律、勘查方法、水质、水量评价以及合理开发利用和管理的学科。 3.1. 5. 2 矿床水文地质学mine hydrogeology 研究矿床水文地质学理论、勘探方法及开采中冇关水文地质问题的学科。 3.1. 5. 3 土壤改良水文地质学reclamation hydrogeology 研究土壤盐渍化及沼泽化等水文地质问题的学科。 3.1. 5. 4 环境水文地质学environmental hydrogeology 研究白然环境中地下水与环境及人类活动的相互关系及其作用结果,并对地下水与环境进行保护、控制和改造的学科。 3.1. 5. 5 同位索水文地质学isotopic hydrogeology 应用同位素方法解决水文地质问题的学科。 3.1. 6 区域水文地质学regional hydrogeology 研究地下水埋藏、分布、形成条件及含水层的区域性规律的学科。 3.1. 7 古水文地质学paleohydrogeology 研究地质历史时期中地卜?水的形成、分布和演变的学科。 3.2自然界的水循环 3.2. 1 水循环water cycle 地球上各种形式的水体相互转换的循环过程。 3.2.2大气圈aerosphere 包围地球表壳的气层。 3.2.3水圈hydrosphere 连续包围地球表层的水体和地壳岩石屮的水的总称。
计算机常用术语资料
计算机常用术语 A access control / 访问控制 access control entry, ACE / 访问控制项 account lockout / 帐户锁定 ACE, access control entry / 访问控制项 acknowledgment message / 应答消息 ACPI (Advanced Configuration and Power Interface) / 高级配置和电源接口active / 活动 active content / 活动内容 Active Directory Active Directory Users and Computers / Active Directory 用户和计算机active partition / 活动分区 active volume / 活动卷 ActiveX Address Resolution Protocol, ARP / 地址解析协议 administration queue / 管理队列 administrative alerts / 管理警报 administrator / 管理员 Advanced Configuration and Power Interface, ACPI / 高级配置和电源接口agent / 代理 Alerter service / 警报器服务 allocation unit size / 分配单元大小
American Standard Code for Information Interchange, ASCII / 美国信息交换标准码 AppleTalk AppleTalk Transport / AppleTalk 传输 ARP, Address Resolution Protocol / 地址解析协议 ASCII, American Standard Code for Information Interchange / 美国信息交换标准码 Assistive Technology Program / 辅助技术程序 asymmetric encryption / 非对称加密 asynchronous communication / 异步通讯 ATM asynchronous transfer mode / 异步传输模式 attributes / 属性 audit policy / 审核策略 auditing / 审核 authentication / 身份验证 authoritative restore / 强制性还原 authorization / 授权 B B-channel / B-信道 background program / 后台程序 backup media pool / 备份媒体池 backup operator / 备份操作员 backup set / 备份集 backup set catalog / 备份集分类