阿克苏诺贝尔分散剂介绍 (中文)
阿克苏诺贝尔公司推出一种独特装饰涂料
阿克苏诺贝尔公司推出一种独特装饰涂料
佚名
【期刊名称】《上海化工》
【年(卷),期】2005(30)4
【摘要】阿克苏诺贝尔(Akzo Nobel)公司推出一种类似于纺织用品的装饰涂料，这种涂辩感官上类似于羊皮、皮革或织物纤维，同时，这种涂料属于一种再生产品。
这是世界上第一种能够根据涞装方法的不同而同时提供两种完全不同效应的涂料装饰产品，这种产品命名为Alnha Tacto。
【总页数】1页(P36-36)
【关键词】阿克苏诺贝尔公司;装饰涂料;推出;织物纤维;装饰产品;产品命名;类似;用品
【正文语种】中文
【中图分类】F407.7;TU56
【相关文献】
1.日本涂料公司推出车用不流挂水性涂/阿克苏诺贝尔研制成功可剥离油漆/BYK推出紫外光固化涂料新产品等 [J],
2.世界涂料“一哥”的暗战——解析PPG收购阿克苏诺贝尔北美装饰漆业务 [J], 汤大友
3.阿克苏诺贝尔装饰涂料（廊坊）有限公司开业 [J],
4.阿克苏诺贝尔公司推出多项环保涂料新技术 [J],
5.阿克苏诺贝尔特种涂料业务部推出柔感表面创新涂料 [J],
因版权原因，仅展示原文概要，查看原文内容请购买。
阿克苏诺贝尔 国际油漆 产品说明书 Intercure 99
Intercure 99聚天门冬氨酸酯可用标准的施工设备直接施工于金属表面，一道施工厚度150-250微米(6-10密耳)，在中度腐蚀环境中(最高到C3，ISO12944-2)使用时，与两道漆施工相比，可以节约施工时间和劳动力成本。
Intercure 99是一种低VOC、高固含量的快干型底漆/面漆，同时提供优异的防腐保护和长效的保光保色性能-其他快干型、单道底漆面漆替代产品无法达到。
Intercure 99同样可以作为一种厚浆型，耐久性中间漆/面漆产品，施工于经认可的防腐底漆之上，在更加恶劣的腐蚀环境中使用，如ISO 12944 C4和C5Intercure 99尤其适用作为单道高性能面漆使用。
用作钢结构施工，减少涂层道数可以帮助提高生产量和生产效率。
快干和可提前搬运特征使其非常适合用于风塔、变压器、矿山设备和泵等对生产率和干燥时间要求较高的场合。
通过Chromascan配色系统可配制多种颜色有光80%±1%150-250微米（6-10密耳）干膜厚相当于188-313微米（7.5-12.5密耳）湿膜厚在175微米干膜厚度和所述体积固体份的情况下，4.60平方米/公升在7密耳干膜厚度过所述体积固体份的情况下，183平方英尺/美制加仑允许适当的损耗系数无气喷涂、空气喷涂自重涂间隔温度 表干 硬干 最小 最大5℃（41°F） 1.5小时 3小时1 3小时 无限制215℃（59°F） 45分钟 2.5小时1 2.5小时 无限制225℃（77°F） 30分钟 1.5小时1 1.5小时 无限制240℃（104°F） 30分钟 1.5小时1 1.5小时 无限制21干燥时间在50%的相对湿度下测是。
增加的湿度可能导致更快的干燥。
2参见国际油漆公司工业防护漆部门的《定义与略缩语》A组份 B组份 混合后39℃(102°F) 81℃(178°F) 39℃(102°F)1.2公斤/公升195克/公升 美国-环境保护局第24号方法153克/公升 欧共体溶剂排放指标1999年第13号委员会命令关于更多的详细资料，请见关于“产品特性”的章节。
阿克苏诺贝尔国际油漆
∙Interbond 808 环氧防锈漆Interbond 808(KRA850,KRA853)是一种浅色、无焦油、表面容忍型、双组份、环氧涂料，体积固体份高达 82％。
Interbond...∙Interbond 501 环氧底漆/面漆Interbond 501(KQA100,KQA101,KQA102,KQA103,KQA109)是一种高固、耐磨、表面容忍型、两罐装、环氧底漆/面漆，具有良好的保色性...∙Interbond 201(常温型) 环氧底漆/面漆Interbond 201(常温型)(KD 100系列)一种耐磨、表面容忍型、两罐装、环氧底漆/面漆，单道涂层即可提供防腐保护性能。
...∙Interbond 201(低温型) 环氧底漆/面漆Interbond 201(低温型)(KD 200)是一种耐磨、表面容忍型、两罐装、环氧底漆/面漆，单道涂层即可提供防腐保护性能。
尚有常温型 ...∙Intershield 300 纯环氧铝粉涂料Intershield 300是一种淡色、耐磨、纯环氧铝粉涂料，具有极佳的长期耐腐蚀性和低温施工特性。
颜色ENA300-古铜色, ENA30...∙Interzinc 2277 快速固化的溶剂型无机硅酸锌底漆Interzinc 22系列产品之一。
这是一种双组份，快速复涂，快速固化的溶剂型无机硅酸锌底漆。
干膜中锌粉的重量比为77％。
符合S...∙Interzinc 2265 无机硅酸锌底漆Interzinc 22系列产品之一。
这是一种双组份，快速复涂，快速固化的溶剂型无机硅酸锌底漆。
干膜中锌粉的重量比为65％。
符合S...Chartek 1709 高性能环氧膨胀型防火涂料Chartek 1709是一种高性能环氧膨胀型防火涂料。
这是一种厚浆型、无溶剂、双组份涂料，有着卓越的耐久性，同时具备防腐和防火保...Interchar 1120 水性环保涂料作为水性涂料，Interchar 1120 具有优异的环保特性，用于保护钢结构，特别适用于美观性很重要场合。
阿克苏诺贝尔粉末涂料Interpon RDX PZ ALZ66CS产品说明书
Product Data SheetAkzoNobel Powder CoatingsInterpon RDX PZALZ66CSProduct Description Interpon RDX PZ is a powder coating primer containing zinc which is designed to give enhanced corrosion protection of mild steel.This duplex system combines cathodic protection and barrier effect. It consists of a two-layersystem with a zinc rich primer Interpon RDX PZ overcoated with a Interpon powder topcoator PU liquid topcoat.Dedicated to steel protection with a surface pre-treatment obtained by grit/shot. InterponRedox PZ is based on a specific epoxy zinc rich formulation that brings conductivity to enablethe cathodic protection. Interpon Redox PZ includes a specific anticorrosive function whichimproves the protection in case of scratch.Powder Properties Chemical type Thermosetting epoxyAppearance SmoothGloss level (60°)40-70%Color Zinc greyRecommended FilmThickness (µm)60 - 120 µmDensity (g/cm3)2,0 g/cm³Application ElectrostaticStorage Under dry, cool (≤ 25°C) conditionsShelf life At least 12 months from production dateCuring schedule See section curing bellowTest Conditions The results shown below are based on mechanical and chemical tests which (unlessotherwise indicated) have been carried out under laboratory conditions and are given forguidance only. Actual product performance will depend upon the circumstances under whichthe product is used.Substrate/Pretreatment Steel; Grit blastingPrimer Thickness 60-80 micronsPrimer Curing 10 minutes at 170°C (Object Temperature)Topcoat Interpon 600 / D1010Topcoat Thickness 60-80 micronsTopcoat Curing 10 minutes at 200°C (Object Temperature)Mechanical Tests Bending test(Cylindrical Mandrel)ISO 1519 Pass 5 mm (Primer)Adhesion ISO 2409(2mm crosshatch) Class 0 (Primer) Class 0 (system)Cupping ISO 1520 Pass 8 mm (Primer) Direct Impact GB 1732-93 Pass 50 kg.cm (Primer)Pass 30 kg.cm (System)Corrosion Tests Mild Steel The results shown are based on tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for advice only, actual performance depends upon the circumstances under which the product is used.Neutral Salt Spray ISO 9227 Results are detailed in Table1 of AppendixPretreatment Surface preparation depends upon the metal, the type of surface, its conditions and theApplication Interpon RDX PZ can be applied by manual or automatic electrostatic spray equipment. For tribo spray, it should be tested before commencing production.Application settings Fluidizing air pressure: 1.5kg/cm2 initially then 1kg/cm2Transport air pressure: 0.5 to 0.8 kg/cmRecommended voltage: 65 to 70kVCuring limits Primer should be cured using the recommended curingschedules, before application of the topcoat. The objecttemperature must not be below 110°C or above 220°C.Recommended DFT 60-120 µmRecycling Trials, with suitable recycling equipment, must be carriedout before commencing production. Attention should bepaid to the ratio of new powder, a minimum of 80% mustbe used. Gun nozzles must be cleaned every 30 minutes.Note: Failure to comply with the recommended curing conditions may affect the adhesion ofthe topcoat and cause performance degradation. Parts coated with Interpon RDX PZ shouldnot be handled if possible. If unavoidable, clean lint-free gloves must be worn.Curing Interpon RDX PZ shows a wide curing range must allowing application on substrates of different nature and thicknesses.Green curing Full semi-curingObject temperature Min Max Min Max110°C 15’ 40’130°C 12’ 30’160°C 12’ 23’170°C 8’ 17’180°C 6’13’200°C 2’ 8’220°C 1’30’’ 5’30’’The Interpon RDX PZ system provides excellent protection against corrosion on the surface to which it is applied. However, the efficiency of this protection depends on the surface, its preparation before coating and the topcoat applied.If there is penetrating damage through the coating system to the substrate, there may be localized signs of corrosion where damage has occurred but this will not affect the adhesion of the film to the adjacent surface. Interpon RDX PZ considerably limits the extent of spread of corrosion in the event of coating damage.Topcoat Application Primer should be over-coated on the same site within 12 hours of applying the primer. If the delay exceeds 12 hours the parts should be heated for 12 minutes at 160°C. (object temperature). The delay must not exceed 24 hours.Refer to the Product Data Sheet for the powder topcoat for application parameters.To ensure the integrity of the system, as well as optimum performance, the whole system must be cured in accordance with the recommended curing conditions for the topcoat. Curing should be carried out in a convection oven, optionally with infra-red heaters. There must be a uniform heat distribution inside the oven.Note: Failure to comply with the recommended final curing conditions may cause variations in color and gloss and cause performance degradation of the system. A detailed protocol for applying Interpon RDX PZ system is available on request.Damage repair Any damage of the Interpon RDX PZ coating system must be repaired as soon as possible.Surface preparationDamaged areas must be clean and free of grease or rust. Dry-sand the area with 600grade paper down to the substrate. The area must be completely free of dust and cleanedwith a non-aggressive solvent before proceeding.ApplicationFor repairs the following two-coat liquid paint system from International Protective Coatingsis recommended:1st Coat: two-pack zinc-rich epoxy primer, Interzinc 722nd Coat: two-pack polyurethane topcoat, Interthane 990Safety Precautions This product is intended for use only by professional applicators in industrial environments and should not be used without reference to the relevant health and safety data sheetwhich Akzo Nobel has provided to its customers.Disclaimer IMPORTANT NOTE: The information in this data sheet is not intended to be exhaustive and is based on the present state of our knowledge and on current laws: any person using the product for any purpose other than that specificallyrecommended in the technical data sheet without first obtaining written confirmation from us as to the suitability ofthe product for the intended purpose does so at his own risk. It is always the responsibility of the user to take allnecessary steps to fulfil the demands set out in the local rules and legislation. Always read the Material Data Sheetand the Technical Data Sheet for this product if available. All advice we give or any statement made about theproduct by us (whether in this data sheet or otherwise) is correct to the best of our knowledge but we have no controlover the quality or the condition of the substrate or the many factors affecting the use and application of the product.Therefore, unless we specifically agree in writing otherwise, we do not accept any liability whatsoever for theperformance of the product or for any loss or damage arising out of the use of the product. All products supplied andtechnical advices given are subject to our standard terms and conditions of sale. You should request a copy of thisdocument and review it carefully. The information contained in this data sheet is subject to modification from time totime in the light of experience and our policy of continuous development. It is the user's responsibility to verify thatthis data sheet is current prior to using the product.Brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobel.Appendix 1: Performance tables Neutral Salt SprayCoating System Interpon RDX PZ / ALZ66CS + Interpon D1010 Conditions Substrate Steel 2mmPretreatment Grit blastingSA 2.5 – Ra 6-12µmPrimer thickness 60 - 80 µmTopcoat thickness 80 - 100 µmAdhesion on surface before test Class 0Neutral Salt Spray ISO 9227 Time Quotation Average corrosion creep (mm) 1 440 hours Scribe 1,74 mm ± 0,36Coating System Interpon RDX PZ / ALZ66CS + Interpon D1010 Conditions Substrate Steel 2mmPretreatment Grit blastingSA 2.5 – Ra 6-12µmPrimer thickness 60 - 80 µmTopcoat thickness 80 - 100 µmAdhesion on surface before test Class 0Cyclic corrosion test ISO 20340 Time Quotation Average corrosion creep (mm) 25 weeklycyclesScribe 6,13 mm ± 1,32/contact-us/Copyright © 2020 Akzo Nobel Powder Coatings Ltd. Interpon is a registered trademark of AkzoNobel Interpon RDX PZ - Issue #1Last Revision Date: 20.11.2020 Author: Lab Songjiang Shanghai。
阿克苏诺贝尔公司农药助剂的介绍及应用
阿克苏诺贝尔公司农药助剂的介绍及应用Morwet系列的分散剂和润湿剂以它们对各种各样的原药活性成分的通用性和配方稳定性而著称，其中Morwet D-425和Morwet EFW 作为标准的萘磺酸盐（缩聚物）类的分散剂和润湿剂被国内外农药制剂研发人员在试验中作为首选，该类产品是世界上最早针对农药制剂而开发的产品，在推出的三十多年时间内，其应用的方法和技术已成为许多研究人员的专利。
1．分散剂Morwet D-425的应用分散剂Morwet D-425为烷基萘磺酸缩聚物钠盐，活性成分大于88%，PH值7.5-10.0，适用于WP，SC和WDG。
在WP中的最低添加量为2-3%，在WDG中的最低添加量为3-5%，在SC中的最低添加量为2-2.5%。
分散剂的添加量是阿克苏诺贝尔公司在美国德克萨斯州福特沃斯粉末实验室经过大量的试验推荐的，由于原药的品种和质量存在差异，国内使用时，根据不同情况，分散剂的加入量要适当增加，如在80%杀螺胺WP中，Morwet D-425的加入量在7%左右。
在WDG中，造粒工艺会影响对分散剂浓度的实际需要，组分造粒的致密性越高，就需要更多地关注颗粒的再分散性和崩解性能，添加更多的分散剂，如在吡虫啉75%WDG中，流化床造粒时添加量在6.5%，而挤压造粒需要在7.5%。
在SC中，固相浓度高时，需要将D-425的添加量增加到3-5%。
表面活性剂配方组成的用量应当正比于最终配方中所加入的固相颗粒的表面积。
如果固相颗粒的平均粒径越小，表面积就越大，因此需要添加更多的表面活性剂。
Morwet D-425偏碱性，对于碱性条件下不稳定的农药需调节制剂的pH值，如在90%的甲萘威WDG中需加入适量柠檬酸以调节制剂的PH值。
Morwet D-425可以与其他类型的分散剂配合使用，如木质素类分散剂。
国内已有的WP配方，如果在悬浮性和分散性上不理想，可在原有配方的基础上加入0.5-2%的Morwet D-425，产品性能会有明显的改观。
阿克苏诺贝尔粉末涂料产品数据表 - Interpon ACE 2010 YN106G 黑色中光泽平滑
Akzo Nobel Powder Coatings BVProduct Data SheetAkzoNobel Powder CoatingsInterpon ACE 2010YN106G Black Medium Gloss SmoothProduct Description Interpon ACE 2010is a series of superior UV and weather resistant TGIC-free polyester powdercoatings designed for exterior exposure and for use as a decorative and/or functional coating foragricultural and construction equipment and components. These coatings also provide significantlyimproved gloss retention and resistance to color change and possess outstanding transfer efficiencyand faraday cage penetration.Powder Properties Chemical type Polyester super-durable (TGIC-free)Area of usage Exterior parts for agricultural machinery or construction equipmentParticle Size Custom manufacturedAppearance Smooth, Medium glossColour BlackGloss (60°)60 ± 5 GUDensity (g/cm3)1,25 ± 0,10Stoving schedue15-30 minutes at 180°C, 10-25 minutes at 190°C, 8-20 minutes at 200°C(time at object temperature)Recommended DFT DTM: 70μm min - 110μm max; On Primer: 50μm min - 90μm max;On e-coat 45μm min - 90μm maxFailure to observe the correct curing and DFT conditions may cause adifference in color, gloss and the deterioration of the coating propertiesApplication ElectrostaticStorage Stability Under dry, cool (<25°C) conditions, at least 12 months from productiondate.Test Conditions The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance willdepend upon the circumstances under which the product is used.Substrate Cold Rolled SteelPretreatment Iron phosphate pretreated panels (ACT BonderiteÒ1070 DIW Panels)Film Thickness76-90 µmCure Schedule15 minutes at 190°CMechanical Tests Elongation ASTM-D522(conical mandrel)No crack at max elongationAdhesion ASTM-D3359(2 mm crosscut)5BHardness ASTM D3363(Gouge)3HCorrosion and Chemical Tests Cyclic Corrosion SAE J233440 days corrosion creep ≤ 3,5 mm fromscribeChemical resistance Good resistance to DI water, diesel fueland engine oilDurability Tests Exterior durability SAE J25272000h, excellent color and glossretention performanceColor stability atelevated temperatureGoodAkzoNobel Powder Coatings B.V. T +31 (0)71 308 6981Rijksstraatweg 31 (building 24) F +31 (0)71 318 6924PO Box 2170BA SassenheimThe NetherlandsPretreatment Aluminum, steel or Zinc surfaces to be coated must be clean and free from grease. Iron phosphate andparticularly lightweight zinc phosphating of ferrous metals improves corrosion resistance.Aluminum substrates may require a chromate or non-chromate conversion coating.Application Interpon ACE 2010 YN106G powders can be applied by manual or automatic electrostatic sprayequipment.It is recommended that for consistent application and appearance product be fluidized duringapplication. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.Safety Precautions This product is intended for use only by professional applicators in industrial environments and shouldnot be used without reference to the relevant health and safety data sheet which Akzo Nobel has provided to its customers.DisclaimerIMPORTANT NOTE: The information in this data sheet is not intended to be exhaustive and is based on thepresent state of our knowledge and on current laws: any person using the product for any purpose otherthan that specifically recommended in the technical data sheet without first obtaining written confirmationfrom us as to the suitability of the product for the intended purpose does so at his own risk. It is always theresponsibility of the user to take all necessary steps to fulfill the demands set out in the local rules andlegislation. Always read the Material Data Sheet and the Technical Data Sheet for this product if available. Alladvice we give or any statement made about the product by us (whether in this data sheet or otherwise) iscorrect to the best of our knowledge but we have no control over the quality or the condition of the substrateor the many factors affecting the use and application of the product.Therefore, unless we specifically agree in writing otherwise, we do not accept any liability whatsoever for theperformance of the product or for any loss or damage arising out of the use of the product. All productssupplied and technical advices given are subject to our standard terms and conditions of sale. You shouldrequest a copy of this document and review it carefully. The information contained in this data sheet issubject to modification from time to time in the light of experience and our policy of continuousdevelopment. It is the user's responsibility to verify that this data sheet is current prior to using the product.Brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobelAkzoNobel Powder Coatings B.V.T +31 (0)71 308 6981 Rijksstraatweg 31 (building 24) F +31 (0)71 318 6924 PO Box 2170BA SassenheimThe Netherlands。
阿克苏诺贝尔(AkzoNobel)中国氯乙酸
措 施 ， 即 宣 布 双 酚 Ａ 是 ‘ 毒 化 学 有
品’ ，采 取 行 动 限制 公 众 接 触 和 限制 双 酚 Ａ 进 入 环 境 中。 英 国研 究 小 组 ” 说 ，他 们 发 现 ９ ％以上 受 调 查 者 体 内 ０ 都 有 双 酚 Ａ，说 明 要避 免 接 触 这 种 化
装 置 大 幅 扩 产
含 量 可 被灵 活 稳定 的控 制 在 客 户 要 求
的 范 围 内 ，最 低 可 降至 １Ｏ ｐ 。 Ｏｐｍ
四年 获 得 安 全生 产 先 进 工厂 的荣誉 。 阿克 苏 诺 贝 尔 的 全球 氯 乙 酸 生产 网 络为 世 界 各 地 区的 客 户提 供 优 质 的
贝 尔 Ｍ Ｃ 业 务 部 总 经 理 安 德 森 指 Ａ
阿克 苏 诺 贝尔 氯 乙酸 泰 兴 工 厂 坐 落在江 苏省泰兴 市泰兴 经济开发 区 ， 距 离 上 海 约 ２ ０公 里 。泰 兴 工 厂 已通 ５
过 Ｉ ０ ０ １ Ｉ Ｏ１ ０ １ 和 ０ＨＳ Ｓ ９ ０ 、 Ｓ ４ ０ ＡＳ
２０ ０ ０万 美 元 的 融 资 项 目。 该 款 项
司 产 能 为 ２ ，０ ５ ０ ０吨 ／年 的 氯 乙 酸 工
厂 在 中国泰 兴 投 产 。这 座 工 厂 综 合 采
将 用 于 在 天津 泰 达 开 发 区建设 中国
最 大 的 聚 羟 基 脂 肪 酸 酯 （ ＨＡ） Ｐ 生产 基 地 。ＰＨＡ 生 产 基 地 于 ２ ０ ０８
１ ０ １的 体 系认 证 ， 自 ２ ０ ８０ ０ ２年 起连 续
六 年 获 得 由泰 兴市 政 府 颁 发 的环 保 先
UV-EB油墨原材料新品
书山有路勤为径；学海无涯苦作舟UV/EB油墨原材料新品国际上顶尖的油墨原材料供应商推出了众多新型的UV/EB油墨原材料，使UV/EB油墨的应用范围得以扩展，功能亦大大增强。
以下作一简单评述。
阿克苏诺贝尔树脂公司Actilane 200HD12：双官能团的聚氨酯丙烯酸酯，具有很强的黏附力和良好的柔韧性，适用于OP油和多种黏合剂的制造。
Actilane 370：改性的环氧丙烯酸酯，具有良好的柔韧性，被推荐用于丝网印刷油墨、特种OP油以及胶印油墨。
Actilane 536：氨改性的聚酯丙烯酸酯，具有很低的黏度和较高的固化速度，柔韧性也非常好。
Actilane 555：新型柔性版印刷油墨用的连结料，具有很强的着色润湿力，黏度低，固化速度快。
虽然是特别针对柔性版印刷油墨而研制的，但它也能满足打底油墨和凸版印刷油墨的要求。
Actilane 560：新型柔性版印刷油墨用的连结料，具有很强的颜料润湿力。
与Actilane 555相比，其同样具有低黏度和高固化速度的特性，但它在性能上更好。
与Actilane 555一样，Actilane 560不仅能用于柔性版印刷油墨，也能完全满足多种网印打底油墨的要求。
Actilane 765：具有极低黏度（10cPs）的单官能团三级胺，具有固化速度快、附着力强的特性，特别适用于各种丝网印刷油墨和上光油。
Actilane 881：多官能团的聚酯丙烯酸酯，具有极快的固化速度，且其黏度很低(600cPs)，附着力很强，特别适合于各种柔性版印刷油墨和喷墨油墨，同时也适用于低传墨量和快速固化的OP油。
CDR颜料和分散剂公司专注下一代成长，为了孩子。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Electrostatic
Steric
•
Steric stabilization mechanism. The barrier, formed by the adsorbed molecules onto the pigment surface, reduce the attractive forces between pigment particles.
AkzoNobel Surface Chemistry
Chemicals for pigment dispersion introduction 用于颜料分散的产品介绍
Facts about Akzo Nobel 关于阿克苏诺贝尔
AkzoNobel at a glance in 2011 阿克苏诺贝尔2011年一览
Surface Chemistry | Paint & Coatings
Chemistry and Technology 化学和技术
Surface Chemistry Capabilities 表面化学能力
Chemistry and technology
Fatty amines and cationic surf 脂肪胺和阳离子表面活性剂
Surface Chemistry | Paint & Coatings
Wetting principle
Bad wetting, high surface tension, big contact angle
Good wetting, low surface tension, small contact angle
33%
34%
33%
• Employees • 员工数
Surface Chemistry | Title
3
Specialty Chemicals key facts 特种化学品介绍
• • • • Revenue €5.3 billion (2011) 销售额53亿欧元(2011) 11,500 employees 11,500员工 Major supplier of specialty chemicals 特种化学品的主要供应商 Leadership positions in selected market segments 选定的细分市场领导者 位置 • Markets we serve: paper, asphalt, soaps & detergents, cosmetics, paints, plastics, ice cream, soups and disinfectants 市场：造纸，沥青，脂肪酸 盐&洗涤剂，化妆品，涂料，塑料，冰激凌，汤和消毒剂 Revenue by business unit
Wetting agent
Air Water
Contact angle reduction is the key!
Headquarters Chicago, USA Bridgewater, USA Stenungsund, Sweden Shanghai, China
R&D locations Bridgewater, USA Chattanooga, USA Croton River, USA Houston, USA Ft. Worth, USA Deventer, the Netherlands Itupeva, Brazil Mumbai, India Singapore Osaka, Japan Shanghai, China Stenungsund, Sweden
•
Surface Chemistry | Paint & Coatings
Surface Chemistry locations 表面化学的分布
A leading supplier in surfactants, fatty amines and polymers worldwide 在表面活性剂，脂肪胺和聚合物上全球范围是领先的供应商
• Sulphation 硫酸化, sulphonation 磺酸化
US
• Organic Synthesis 有机合成
US
• Phosphorylation 磷酸化
US, Sweden
• Bulk Sulphonation 本体磺化பைடு நூலகம்
US
• Carbon Disulfide 二硫化碳
US
Surface Chemistry | Paint & Coatings
• Revenue (in € billions) • 销售额（单位：十亿欧）
• Our geo-mix (revenue) and employees (by region) • 从地理区域角度划分销售额和员工数
Revenue by business area 业务领域销售额
Specialty Chemicals 特种化学 品 Performance Coatings 高性能 涂料 Decorative Paints 装饰漆
• Amidation and Amination 酰胺化和胺基化
US, Belgium, Sweden, Brazil
Polymers聚合物
• Aqueous Solution Polymerization 水 溶性聚合
US, Asia
• Quaternization 季胺化
the Netherlands, US, Brazil, Sweden, Singapore
• Aqueous Emulsion Polymerization水 性乳液聚合
US, Asia
• Solvent Polymerization 溶剂聚合
US
Specialty surfactants 特种表面活性剂
• Alkoxylation 烷氧基化
Sweden, US, Singapore.
• Biopolymer Modifications生物聚合物 改性
Akzonobel product for ink industry
Wetting and dispersant agent
Pigment dispersion steps
1. 2. 3. Wet out particle surface Break-up aggregate Surfactants Surfactants + Polymers Polymers
Surface Chemistry | Paint & Coatings
Surface Chemistry - What we do 表面化学-我们的领域
• We develop, manufacture and market a unique spectrum of:我们在下列独特区域开发, 生产和销售: • Specialty surfactants, 特种表面活性剂 • Fatty amines, 脂肪胺 • Synthetic and bio-polymers. 合成生物聚合
Pulp and Performance – 纸浆和性能
• Colloidal silica 胶体氧化硅. LevasilTM . BindzilTM
Functional Chemicals – Polymer additives 功能化学 品-聚合物添加剂
Initiators polymerization (radical ). 聚合反应的引发剂(自由基) PerkadoxTM and TrigonoxTM. Accelerators.加速剂 Co-based and Co-free. NouryactTM
• Expandable microspheres. ExpancelTM • Expandable 微球
Functional Chemicals – Performance Additives 功 能化学品-功能性添加剂
• Rheology modifiers:流变改性剂
• Cellulosic ether (EHEC and MEHEC) 纤维素醚BermocollTM • HEUR. BermodolTM
21% 21%
Surface Chemistry
Chemicals Pakistan
20%
4%
* Before incidentals
Surface Chemistry | Title
4
What Akzo Nobel Chemicals supply
Surface Chemistry 表面化 学
• Surfactants 表面活性剂 • Fatty amines 脂肪胺 • Polymers (Dispersants & HASE Thickeners) 聚合物
to the Paint & Coatings market 阿克苏诺贝尔支持涂料市场的化 学品分类
Functional Chemicals – Ethylene Amines功能化学 品- 乙烯胺
• Ethylene amines 乙烯胺
Pulp and Performance – Expancel 纸浆和性能
物(Dispersants and rheology modifiers分散剂和流
变改性剂)
• Our products are used in everything, from home & personal care products to industrial and agro applications.我们的产品在很多领域 都有使用,从家庭&个人护理到工业和农业领域 的应用。
6% 17% 35%
Functional Chemicals Industrial Chemicals Pulp and Paper Chemicals