39941-07中文资料

合集下载

hjt399-2007

hjt399-2007

《HJT399-2007火灾报警系统安装规范》一、简介HJT399-2007火灾报警系统安装规范(以下简称HJT399-2007)是由中华人民共和国住房和城乡建设部制定的一项规范,旨在保证火灾报警系统的安全、可靠性和稳定性,以及保障其能够及时发现火灾和发出警报,保护人民群众的生命财产安全。

二、安装要求1、安装环境要求(1)火灾报警系统安装环境应符合GB50016-2006《建筑设计防火规范》的规定,并符合GB50303-2002《建筑电气工程施工及验收规范》的要求。

(2)火灾报警系统安装环境应有足够的通风条件,以保证报警装置的正常工作。

(3)火灾报警系统安装环境应保证报警装置的防护等级,避免受到潮湿、高温、振动等条件的影响。

2、安装质量要求(1)火灾报警系统安装应符合HJT399-2007《火灾报警系统安装规范》的要求,并符合GB50303-2002《建筑电气工程施工及验收规范》的要求。

(2)安装工程师应具有火灾报警系统安装的相关专业知识和技能,并熟悉HJT399-2007《火灾报警系统安装规范》的要求。

(3)安装工程师应按照HJT399-2007《火灾报警系统安装规范》的要求,进行安装施工,并确保安装质量。

三、安装步骤1、安装前准备(1)根据HJT399-2007《火灾报警系统安装规范》的要求,按照设计文件的要求,准备安装所需的材料。

(2)检查安装环境是否符合HJT399-2007《火灾报警系统安装规范》的要求。

(3)检查安装材料是否符合HJT399-2007《火灾报警系统安装规范》的要求。

2、安装施工(1)按照HJT399-2007《火灾报警系统安装规范》的要求,安装报警控制器及相关设备。

(2)安装报警控制器及相关设备时,应按照设计文件的要求,确保安装质量。

(3)安装完成后,应进行调试,确保系统的正常运行。

3、安装验收(1)安装验收应符合HJT399-2007《火灾报警系统安装规范》的要求,并符合GB50303-2002《建筑电气工程施工及验收规范》的要求。

39940-07中文资料

39940-07中文资料

FEATURES AND SPECIFICATIONS SPECIFICATIONS 3.81 and 5.08mm (.150 and .200") Pitch Beau®EuroMate®Pluggable Barrier Strip 39930, 39940Connector technology has not allowed power monitoring and controls system designers to realize the packaging densities made possible by modern electronics. In order to increase packaging densities, the EuroMate has a large and robust wiring terminal interface with a higher density PCB connection. In addition, the PCB connection is pluggable to allow for ease of factory assembly and field repair service. Molex offers the EuroMate with optional retention screws or mounting flanges, so you can find the best fit for your needs. One of the most important benefits of the Beau EuroMate is that it uses a single piece insulator for cost efficiency.Reference Information Packaging: BoxUL File No.: E48521Guide No.: XCFR2UL for Canada File No.: E48521Guide No.: XCFR8ElectricalVoltage: 300VCurrent:39930 – 12.0A39940 – 15.0AInsulation Resistance: 3000 Megohms min.MechanicalWire Range:39930 – 14 to 22 AWG(2.08 to 0.32mm2)39940 – 12 to 22 AWG(3.30 to 0.32mm2)Strip Length: 6.00mm (.250”)Tightening Torque: 0.79 Nm (7.00 in-lbs)Operating Temperature: +105°CPhysicalHousing: Polyamide 6.6 UL 94V-0, BlackContact:39930 – Berylium Copper39940 – Phosphor BronzeScrews:39930 – M3 Steel with Clamp Washer39940 – M3.5 Steel with Clamp WasherPlating:Contact – TinScrew – Zinc ChromateFeatures and BenefitsI Single row of female contacts interface with industry-standard European style headers, which produces twice the pitch at the wiring terminalI Wiring terminals are staggered and offset vertically to facilitate easier wiring access I Mounting flanges accommodate panelmounting to prevent any bowing orflexing during connector mating andunmatingI Accepts 1/4” ring and spade wiringterminals to assure acceptance in allmarketsI Rear barrier prevents over-insertion ofwire into deviceBeau EuroMate pluggable PCB terminal blocks have a higher density PCB connection and are available in pitches of 3.81 and 5.08mm (.150 and .200”)Americas Headquarters Lisle, Illinois 60532 U.S.A.1-800-78MOLEX amerinfo@ Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324feninfo@ Far East South Headquarters Jurong, Singapore 65-6-268-6868fesinfo@ European Headquarters Munich, Germany 49-89-413092-0eurinfo@Corporate Headquarters 2222 Wellington Ct.Lisle, IL 60532 U.S.A.630-969-4550Fax:630-969-1352Visit our Web site at /products/tblocks.htmlOrder No. USA-264Printed in USA/5K/JI/JI/2004.09©2004, MolexFor 3.81mm (.150”) products, replace XX with no. of circuits, 03 to 21.For 5.08mm (.200”) products, replace XX with no. of circuits 03 to 24.。

海关商品编码

海关商品编码
2906199013
3004909072
7
androst-5-ene-3α,17β-diol
雄-5-烯-3α,17β-二醇*
2906199013
3004909073
8
androst-5-ene-3β,17α-diol
雄-5-烯-3β,17α-二醇*
2937290011
3004320014
9
4-androstenediolandrost-4-ene-3β,17β-diol
3004320028
26
desoxymethyltestosterone
脱氧甲基睾酮*
2937290014
3004320029
27
dihydrotestosterone
双氢睾酮
2937290015
3004320029
28
drostanolone
屈他雄酮(羟甲雄酮)
2937290015
3004320028
74
zilpaterol
齐帕特罗
2933990040
3004909078
美雄酮
2937290017
3004320035
43
methasterone
2α,17α-二甲基-5α-雄烷-3-酮-17β-醇
2937290017
3004320036
44
methyldienolone
17α-甲基-17β-羟基雌-4,9(10)-二烯-3-酮*
2937290018
3004320037
39
3β-hydroxy-5β-androstan-17-one
3β-羟基-5β-雄烷-17-酮*
2914400020

AO4459中文资料

AO4459中文资料

AO4459中⽂资料SymbolTyp Max 33406275R θJL 1824Maximum Junction-to-Lead CSteady-State°C/WThermal Characteristics ParameterUnits Maximum Junction-to-AmbientAt ≤ 10s R θJA °C/W Maximum Junction-to-Ambient ASteady-State °C/W AO4459AO4459SymbolMin TypMaxUnits BV DSS -30V -1T J =55°C-5I GSS ±100nA V GS(th)-1.5-1.85-2.5V I D(ON)-30A 3846T J =125°C53685872m ?g FS 11S V SD -0.78-1V I S-3.5A C iss 668830pF C oss 126pF C rss 92pF R g69?Q g (10V)12.716nC Q g (4.5V) 6.4nC Q gs 2nC Q gd 4nC t D(on)7.7ns t r 6.8ns t D(off)20ns t f 10ns t rr 2230ns Q rr15nCTHIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,FUNCTIONS AND RELIABILITY WITHOUT NOTICE.DYNAMIC PARAMETERS Maximum Body-Diode Continuous CurrentGate resistanceV GS =0V, V DS =0V, f=1MHzV GS =0V, V DS =-15V, f=1MHz Input Capacitance Output Capacitance Turn-On Rise Time Turn-Off DelayTime V GS =-10V, V DS =-15V, R L =2.5?, R GEN =3?Turn-Off Fall TimeTurn-On DelayTime SWITCHING PARAMETERSTotal Gate Charge (4.5V)Gate Source Charge Gate Drain Charge Total Gate Charge (10V)V GS =-10V, V DS =-15V, I D =-6.5Am ?V GS =-4.5V, I D =-5AI S =-1A,V GS =0V V DS =-5V, I D =-6.5AR DS(ON)Static Drain-Source On-ResistanceForward TransconductanceDiode Forward VoltageI DSS µA Gate Threshold Voltage V DS =V GS I D =-250µA V DS =-24V, V GS =0VV DS =0V, V GS =±20V Zero Gate Voltage Drain Current Gate-Body leakage current Electrical Characteristics (T J =25°C unless otherwise noted)STATIC PARAMETERS ParameterConditions Body Diode Reverse Recovery Time Body Diode Reverse Recovery ChargeI F =-6.5A, dI/dt=100A/µsDrain-Source Breakdown Voltage On state drain currentI D =-250µA, V GS =0V V GS =-10V, V DS =-5V V GS =-10V, I D =-6.5AReverse Transfer Capacitance I F =-6.5A, dI/dt=100A/µs A: The value of R θJA is measured with the device mounted on 1in 2FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The value in any a given application depends on the user's specific board design. The current rating is based on the t ≤ 10s thermal resistance rating.B: Repetitive rating, pulse width limited by junction temperature.C. The R θJA is the sum of the thermal impedence from junction to lead R θJL and lead to ambient.D. The static characteristics in Figures 1 to 6 are obtained using < 300µs pulses, duty cycle 0.5% max.E. These tests are performed with the device mounted on 1 in 2FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The SOA curve provides a single pulse rating. Rev0 Sept 2006AO4459AO4459。

商品归类代码说明(第七十一章)

商品归类代码说明(第七十一章)

商品名称编码附加编码附加序号说明未分级的天然珍珠 71011019 - 001 -已分级天然珍珠 71011099 - 001 -珍珠 71011099 - 002 未分级除外,天然的淡⽔珍珠 71012110 - 001 养殖的,未加⼯,未分级未分级,未加⼯的养殖珍珠 71012110 - 002 -已分级未加⼯养殖珍珠 71012190 - 001 -珍珠 71012190 - 002 养殖的,未加⼯,已分级淡⽔珍珠 71012210 - 001 养殖的,已加⼯,未分级⼈⼯珍珠 71012210 - 002 养殖的,已加⼯,未分级未分级,已加⼯的养殖珍珠 71012210 - 003 -养殖珍珠 71012210 - 004 已加⼯,未分级珍珠 71012210 - 005 养殖的,已加⼯,未分级淡⽔珍珠 71012290 - 001 养殖的,已加⼯,已分级⼈造珍珠 71012290 - 002 养殖的,已加⼯,已分级已分级已加⼯养殖珍珠 71012290 - 003 -珍珠 71012290 - 004 养殖的,已加⼯,已分级钻⽯ 71021000 - 001 未分级,未镶嵌钻⽯⽑坯 71021000 - 002 未分级,未镶嵌钻⽯ 71022900 - 001 未加⼯或简单加⼯的除外,⼯业⽤⽑坯钻 71023100 - 001 未加⼯或简单加⼯,⾮⼯业⽤天然钻⽯坯 71023100 - 002 未加⼯或简单加⼯,⾮⼯业⽤原钻⽯坯 71023100 - 003 未加⼯或简单加⼯,⾮⼯业⽤钻坯 71023100 - 004 未加⼯或简单加⼯,⾮⼯业⽤钻⽯ 71023100 - 005 未加⼯或简单加⼯,⾮⼯业⽤钻⽯⽑坯 71023100 - 006 未加⼯或简单加⼯,⾮⼯业⽤钻⽯坯 71023100 - 007 未加⼯或简单加⼯,⾮⼯业⽤钻⽯ 71023900 - 001 未加⼯或简单加⼯除外,⾮⼯业⽤半宝⽯ 71031000 - 001 天然的,未加⼯或仅简单加⼯半宝⽯料 71031000 - 002 天然的,未加⼯或仅简单加⼯半宝⽯原料 71031000 - 003 天然的,未加⼯或仅简单加⼯宝⽯原料 71031000 - 004 天然的,未加⼯或仅简单加⼯玛瑙料 71031000 - 005 天然的,未加⼯或仅简单加⼯玛瑙原料 71031000 - 006 天然的,未加⼯或仅简单加⼯⽯料 71031000 - 007 天然半宝⽯料,未加⼯或简单加⼯什宝⽯料 71031000 - 008 天然的,未加⼯或仅简单加⼯什⽯ 71031000 - 009 天然宝⽯,未加⼯或仅简单加⼯什⽯料 71031000 - 010 天然宝⽯,未加⼯或仅简单加⼯什⽟⽯料 71031000 - 011 天然的,未加⼯或仅简单加⼯饰⽯(半宝⽯) 71031000 - 012 天然的,未加⼯或仅简单加⼯未加⼯宝⽯或半宝⽯ 71031000 - 013 天然的有⾊什⽯ 71031000 - 014 天然宝⽯,未加⼯或仅简单加⼯⽟料 71031000 - 015 天然的,未加⼯或仅简单加⼯⽟器花件半成品 71031000 - 016 天然的⽟⽯ 71031000 - 017 天然的,未加⼯或仅简单加⼯⽟⽯半成品 71031000 - 018 天然的⽟⽯料 71031000 - 019 天然的,未加⼯或仅简单加⼯⽟⽯⽑料 71031000 - 020 天然的,未加⼯或仅简单加⼯⽟⽯胚料 71031000 - 021 天然的,未加⼯或仅简单加⼯⽟⽯坯 71031000 - 022 天然的,未加⼯或仅简单加⼯⽟⽯原料 71031000 - 023 天然的,未加⼯或仅简单加⼯⽟镯坯料 71031000 - 024 天然的,未加⼯或仅简单加⼯杂⽯料 71031000 - 025 天然宝⽯,未加⼯或仅简单加⼯红宝⽯ 71039100 - 001 天然,未加⼯或仅简单加⼯的除外蓝宝⽯ 71039100 - 002 天然,未加⼯或仅简单加⼯的除外绿宝⽯ 71039100 - 003 天然,未加⼯或仅简单加⼯的除外⽟⽯料 71039910 - 001 翡翠的,未加⼯或简单加⼯的除外翡翠 71039910 - 002 天然,未加⼯或仅简单加⼯的除外半宝⽯ 71039990 - 001 经加⼯的,红蓝绿宝⽯及翡翠除外半宝⽯半成品 71039990 - 002 经加⼯的,红蓝绿宝⽯及翡翠除外宝⽯ 71039990 - 003 经加⼯的,红蓝绿宝⽯及翡翠除外不定型宝⽯ 71039990 - 004 经加⼯的,红蓝绿宝⽯及翡翠除外晶⽯ 71039990 - 005 经加⼯的,红蓝绿宝⽯及翡翠除外什宝⽯ 71039990 - 006 经加⼯的,红蓝绿宝⽯及翡翠除外什⽯ 71039990 - 007 经加⼯的,红蓝绿宝⽯及翡翠除外什⽟⽯ 71039990 - 008 经加⼯的,红蓝绿宝⽯及翡翠除外⽔晶⽯ 71039990 - 009 经加⼯的,红蓝绿宝⽯及翡翠除外天然⽯(宝⽯) 71039990 - 010 经加⼯的,红蓝绿宝⽯及翡翠除外⽟器 71039990 - 011 经加⼯的,红蓝绿宝⽯及翡翠除外⽟⽯ 71039990 - 012 经加⼯的,红蓝绿宝⽯及翡翠除外⽟⽯制品 71039990 - 013 经加⼯的,红蓝绿宝⽯及翡翠除外杂⽟⽯ 71039990 - 014 经加⼯的,红蓝绿宝⽯及翡翠除外晶⽚ 71041000 - 001 压电⽯英⽯英 71041000 - 002 压电⽔晶⽚ 71041000 - 003 压电⽯英合成钻⽯ 71042010 - 001 合成或再造,未加⼯或仅简单加⼯宝⽯原料 71042090 - 001 合成,未加⼯,钻⽯除外⼈造半宝⽯ 71042090 - 002 未加⼯或仅简单加⼯,钻⽯除外⼈造宝⽯ 71042090 - 003 未加⼯或仅简单加⼯,钻⽯除外⼈造宝⽯料 71042090 - 004 未加⼯或仅简单加⼯,钻⽯除外⼈造宝⽯原料 71042090 - 005 未加⼯或仅简单加⼯,钻⽯除外⼈造钻⽯ 71049011 - 001 经加⼯的宝⽯半宝⽯,⼯业⽤半宝⽯ 71049099 - 001 经加⼯,⼯业⽤除外,钻⽯除外⼈造宝⽯ 71049099 - 002 经加⼯,⼯业⽤除外,钻⽯除外⼈造⽯ 71049099 - 003 经加⼯的,⼯业⽤除外,钻⽯除外杂⽯ 71049099 - 004 经加⼯的,⼯业⽤除外,钻⽯除外⼈造⾦刚⽯单晶 71051000 - 001 合成的钻⽯粉末⼈造⾦刚⽯粉 71051000 - 002 -钻⽯粉 71051000 - 003 天然或⼈造导电粉末(银粉) 71061000 - 001 -银粉 71061000 - 002 -纯银 71069110 - 001 未锻造,⼤于等于99.99%99%⽩银 71069190 - 001 未锻造纯银 71069210 - 001 半制成,纯度达于等于99.99%银板 71069210 - 002 半制成,纯度⼩于99.99%银丝 71069210 - 003 半制成,纯度⼩于99.99%银板 71069290 - 001 未锻造,纯度⼩于99.99%银粒 71069290 - 002 未锻造,纯度⼩于99.99%银条 71069290 - 003 半制成,纯度⼩于99.99%银线 71069290 - 004 半制成,纯度⼩于99.99%包银铜线 71070000 - 001 -银⽚ 71070000 - 002 以贱⾦属为底的包银材料⾦粉 71081100 - 001 ⾮货币⽤24K黄⾦块 71081200 - 001 未锻造,⾮货币⽤24K⾦ 71081200 - 002 未锻造,⾮货币⽤,⾦粉除外24K⾦粗坯 71081200 - 003 未锻造,⾮货币⽤24K⾦块 71081200 - 004 未锻造,⾮货币⽤24K⾦料 71081200 - 005 未锻造,⾮货币⽤,⾦粉除外纯黄⾦块 71081200 - 006 未锻造,⾮货币⽤纯黄⾦料 71081200 - 007 未锻造,⾮货币⽤,⾦粉除外黄⾦ 71081200 - 008 未锻造,⾮货币⽤,⾦粉除外黄⾦条 71081200 - 009 未锻造,⾮货币⽤⾦块 71081200 - 010 未锻造,⾮货币⽤⾦粒 71081200 - 011 未锻造,⾮货币⽤,⾦粉除外未锻造的⾦ 71081200 - 012 ⾮货币⽤,⾦粉除外⾜黄⾦ 71081200 - 013 未锻造,⾮货币⽤,⾦粉除外⾜⾦ 71081200 - 014 未锻造,⾮货币⽤,⾦粉除外⾜⾦九九⾦ 71081200 - 015 未锻造,⾮货币⽤,⾦粉除外14K黄⾦ 71081300 - 001 ⾮货币⽤,半制成14K⾦半成品 71081300 - 002 ⾮货币⽤,半制成14K⾦粒 71081300 - 003 ⾮货币⽤,半制成14K⾦料 71081300 - 004 ⾮货币⽤,半制成14K⾦饰料 71081300 - 005 ⾮货币⽤,半制成18K黄⾦ 71081300 - 006 ⾮货币⽤,半制成18K⾦半成品 71081300 - 007 ⾮货币⽤18K⾦粒 71081300 - 008 ⾮货币⽤,半制成22K黄⾦块 71081300 - 009 ⾮货币⽤,半制成24K⾦ 71081300 - 010 ⾮货币⽤,半制成24K⾦半成品 71081300 - 011 ⾮货币⽤,半制成24K⾦块 71081300 - 012 ⾮货币⽤,半制成24K⾦料 71081300 - 013 ⾮货币⽤,半制成99%黄⾦ 71081300 - 014 ⾮货币⽤,半制成9K黄⾦ 71081300 - 015 ⾮货币⽤,半制成9K⾦粒 71081300 - 016 ⾮货币⽤,半制成。

项汽车轻工化工黑色冶金有色金属

项汽车轻工化工黑色冶金有色金属
食品添剂 酪蛋白酸钠
本标准规定了食品添加剂酪蛋白酸钠(酪朊酸钠)的技术要求、试验方法、检验规则、标志、包装、运输及贮存。
本标准适用于以鲜奶或干酪素为原料,经氢氧化钠或碳酸钠处理后精制所得的酪蛋白酸钠(又称酪朊酸钠)产品。
QB 3800-1999
28
QB/T 4071-2010
课桌椅
本标准规定了课桌椅的术语和定义、分类、要求、试验方法、检验规则、使用说明、标志、包装、运输和贮存等。
轻工行业
7
QB/T 1103-2010
猪鬃漆刷
本标准规定了猪鬃漆刷的术语和定义、产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存。
本标准适用于以猪鬃为刷头,木材、塑料为刷柄制成的漆刷。
QB/T 1103-2001
8
QB 1643-2010
发用摩丝
本标准规定了发用摩丝的术语和定义、分类、要求、试验方法、检验规则及标志、包装、运输、贮存等要求。
本标准适用于交流额定电压为220V和直流额定电压不超过750V的电动汽车用传导式充电接口。
6
QC/T 842-2010
电动汽车电池管理系统与非车载充电机之间的通信协议
本标准规定了电动汽车电池管理系统(简称BMS)与非车载充电机(简称充电机)之间的通信协议。
本标准适用于电动汽车非车载充电。该标准的CAN标识符为29位,通信波特率为250kbps,但该标准不限于29位标识符和250kbps通信波特率,如使用其它格式,可参照该标准制定其CAN标识符。标准数据传输采用低位先发送的格式。
QB/T 1876-1993
14
QB/T 1997-2010
照相明胶
本标准规定了照相明胶的要求、试验方法、检验规则和标志、包装、运输、贮存。

DLT404-20073(可编辑)

DLT404-20073(可编辑)

DLT 404-2007 3DL中华人民共和国电力行业标准DL/T 404-2007代替 DL/T 404-19973.6kV~40.5kV 交流金属封闭开关设备和控制设备Alternating-Current metal-enclosed Switchgear and controlgear for rated voltagesabove 3.6kV and up to and including 40.5kV(IEC 62271-200: 2003 Alternating-Current metal-enclosed switchgear andcontrolgear for rated voltages above 1kV and up to and including 52kV, MOD)2007-12-11发布 2008-06-01 实施中华人民共和国国家发展和改革委员会发布//.DL/T 404-2007目次前言V1 概述.11.1 范围11.2 规范性引用文件. 12 正常和特殊使用条件..23 术语和定义.23.101 开关设备和控制设备 switchgear and controlgear23.102 金属封闭开关设备和控制设备 metal-enclosed switchgear and controlgear 2//0>. //.3.103 功能单元(总装的)functional unit of an assembly23.104 多层multi-tier23.105 运输单元 transport unit 23.106 外壳enclosure 23.107 隔室compartment. 23.108 隔板partition 33.109 隔板的等级 partition class 3//. //.3.110 活门shutter33.111 分隔(导体的)segreation of conductors 33.112 套管bushing33.113 元件component 33.114 主回路(总装的)main circuit of an assembly. 43.115 接地回路 earthing circuit. 43.116 辅助回路 auxiliary circuit 43.117 压力 //. //. 释放装置 pressure relief device 43.118 充流体隔室 fluid-filled compartment 43.119 相对压力 relative pressure 43.120 昀低功能水平(充流体隔室的)minimum functional level of fluid-filled compartments43.121 设计水平(充流体隔室的)design level of fluid-filled compartments 43.122 设计温度(充流体隔室的)design temperature of fluid-filled compartments 43.123 周围空气温度(金属封闭开关设备和控制设备的)ambient air temperature of//. //.metal-enclosed switchgear and controlgear43.124 可移开部件 removable part. 53.125 可抽出部件 withdrawable part. 53.126 工作位置(接通位置)service position connected position. 53.127 接地位置 earthing position 53.128 试验位置(可抽出部件的)test position of a withdrawable part53.129 隔离位置(可抽出部件的)disconnected position of a withdrawable part 53.130 移开位置(可移开部件的)removed position of a removable part53.131 丧失运行连续性类别(LSC)loss of service continuity category LSC. 53.132 内部电弧级开关设备和控制设备(IAC)internal arc classified switchgear and?I?//.DL/T 404-2007controlgear IAC 53.133 防护等级 degree of protection 63.134 额定值 rated value63.135 破坏性放电 disruptive discharge. 64 额定值..64.1 额定电压(Ur)64.2 额定绝缘水平 64.3 额定频率(f )6r4.4 额定电流和温升. 64.5 额定短时耐受电流(I ) 7k4.6 额定峰值耐受电流(IP) 74.7 额定短路持续时间(tk) 74.8 合闸和分闸装置及其辅助和控制回路的额定电源电压(Ua)7 4.9 合闸和分闸装置及其辅助回路的额定电源频率74.10 可控压力系统压缩气源的额定压力74.11 绝缘和/或操作用气体或液体的额定充入水平..75 设计和结构.75.1 对开关设备和控制设备中液体的要求. 85.2 对开关设备和控制设备中气体的要求. 85.3 接地85.4 辅助设备和控制设备 95.5 动力操作. 95.6 储能操作. 95.7 不依赖人力的操作95.8 脱扣器的操作 95.9 低压力和高压力闭锁和监视装置95.10 铭牌. 95.11 联锁装置105.12 位置指示115.13 外壳的防护等级115.14 爬电距离115.15 气体和真空的密封 115.16 液体的密封 115.17 易燃性. 115.18 电磁兼容性(EMC)115.19 X 射线的辐射115.20 腐蚀 115.101 内部故障. 115.102 外壳125.103 隔室135.104 可移开部件155.105 电缆绝缘试验的规定 155.106 对小空气间隙的要求昀 16?II?//.DL/T 404-20076 型式试验..166.1 概述. 166.2 绝缘试验 176.3 无线电干扰电压(r、i、v)试验 19 6.4 回路电阻的测量 196.5 温升试验 206.6 短时耐受电流和峰值耐受电流试验20 6.7 防护等级检验216.8 密封试验 226.9 电磁兼容性试验(EMC)226.10 辅助和控制回路的附加试验. 226.10.3 接地金属部件的电气连续性试验. 22//. //.6.11 真空开断装置 X射线试验程序226.101 关合和开断能力的验证. 226.102 机械试验. 236.103 充气隔室的压力耐受试验和气体状态检测 23 6.104 非金属隔板和活门的试验236.105 防雨试验. 246.106 内部电弧试验 24//. //.7 出厂试验..257.1 主回路的绝缘试验. 257.2 辅助和控制回路的试验 257.3 主回路电阻测量 257.4 密封试验 257.5 设计和外观检查 257.6 机械操作和机械特性试验. 25//. //.7.101 局部放电测量 267.102 充气隔室的压力试验和气体状态测量. 26 7.103 电动、气动和液压装置的辅助装置的试验 26 7.104 现场安装后的试验267.105 现场充流体后的流体状态测量. 268 金属封闭开关设备和控制设备的选用导则..268.1 额定值的选择26//. //.8.2 设计和结构的选择. 278.3 内部电弧等级的选择289 应随订货单、投标书和询问单一起提供的资料.319.101 随订货单和询问单一起提供的资料 319.102 投标时应提供的资料 3210 运输、储存、安装、运行和维修规则..3310.1 运输、储存和安装时的条件. 3310.2 安装 33?III?//.DL/T 404-200710.3 运行 3310.4 维修 3311 安全..3311.101 程序. 3311.102 内部电弧 34附录 A (规范性附录)内部故障??在内部故障引起电弧的条件下金属封闭开关设备和控制设备的试验方法错误!未定义书签。

化工原料(又称塑料原料)商品编码(又称海关编码)一览表-

化工原料(又称塑料原料)商品编码(又称海关编码)一览表-

39072010 聚四亚甲基醚二 醇 39072090 初级形状的其他 聚醚
39072010 聚四亚甲基醚二
Chlorinated yethers
Pol
PENTON
代不锈钢氟 塑材等材料
39072000
醇 39072090 初级形状的其他
聚醚
39072010 聚四亚甲基醚二
Poly Phenylene Oxide
的非可发性的聚苯乙烯 39031990 其他初级形状的
聚苯乙烯
39031910 改性的初级形状
绝热包装、 浮力材等
39031900
的非可发性的聚苯乙烯 39031990 其他初级形状的
聚苯乙烯
39031910 改性的初级形状
玩具、日用 器等
39031900
的非可发性的聚苯乙烯 39031990 其他初级形状的
聚砜
ylate-Styrene
片等
39069090 聚丙烯酸钠
Polyetheretherk etone
PEEK
接线板、轴 承、活塞环 39072000 等
39072010 聚四亚甲基醚二 醇 39072090 初级形状的其他 聚醚
Polyetherimide PEI
仪表罩、轴 承、线路板 39072000 等
聚甲基丙烯酸 甲酯
Polymethyl hacrylate
Met
PMMA
聚丙烯 百折胶 聚丙烯 类
Polypropylene PP
孖力士
High Density 高密度聚乙烯
P
HDPE
olyethylene
Low Density Po
聚乙烯 花料, 筒料 低密度聚乙烯 lyethylene
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

FEATURES AND SPECIFICATIONS SPECIFICATIONS 3.81 and 5.08mm (.150 and .200") Pitch Beau®EuroMate®Pluggable Barrier Strip 39930, 39940
Connector technology has not allowed power monitoring and controls system designers to realize the packaging densities made possible by modern electronics. In order to increase packaging densities, the EuroMate has a large and robust wiring terminal interface with a higher density PCB connection. In addition, the PCB connection is pluggable to allow for ease of factory assembly and field repair service. Molex offers the EuroMate with optional retention screws or mounting flanges, so you can find the best fit for your needs. One of the most important benefits of the Beau EuroMate is that it uses a single piece insulator for cost efficiency.
Reference Information Packaging: Box
UL File No.: E48521
Guide No.: XCFR2
UL for Canada File No.: E48521
Guide No.: XCFR8
Electrical
Voltage: 300V
Current:
39930 – 12.0A
39940 – 15.0A
Insulation Resistance: 3000 Megohms min.Mechanical
Wire Range:
39930 – 14 to 22 AWG
(2.08 to 0.32mm2)
39940 – 12 to 22 AWG
(3.30 to 0.32mm2)
Strip Length: 6.00mm (.250”)
Tightening Torque: 0.79 Nm (7.00 in-lbs)
Operating Temperature: +105°C
Physical
Housing: Polyamide 6.6 UL 94V-0, Black
Contact:
39930 – Berylium Copper
39940 – Phosphor Bronze
Screws:
39930 – M3 Steel with Clamp Washer
39940 – M3.5 Steel with Clamp Washer
Plating:
Contact – Tin
Screw – Zinc Chromate
Features and Benefits
I Single row of female contacts interface with industry-standard European style headers, which produces twice the pitch at the wiring terminal
I Wiring terminals are staggered and offset vertically to facilitate easier wiring access I Mounting flanges accommodate panel
mounting to prevent any bowing or
flexing during connector mating and
unmating
I Accepts 1/4” ring and spade wiring
terminals to assure acceptance in all
markets
I Rear barrier prevents over-insertion of
wire into device
Beau EuroMate pluggable PCB terminal blocks have a higher density PCB connection and are available in pitches of 3.81 and 5.08mm (.150 and .200”)
Americas Headquarters Lisle, Illinois 60532 U.S.A.1-800-78MOLEX amerinfo@ Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324feninfo@ Far East South Headquarters Jurong, Singapore 65-6-268-6868fesinfo@ European Headquarters Munich, Germany 49-89-413092-0eurinfo@
Corporate Headquarters 2222 Wellington Ct.Lisle, IL 60532 U.S.A.630-969-4550Fax:630-969-1352
Visit our Web site at /products/tblocks.html
Order No. USA-264
Printed in USA/5K/JI/JI/2004.09
©2004, Molex
For 3.81mm (.150”) products, replace XX with no. of circuits, 03 to 21.For 5.08mm (.200”) products, replace XX with no. of circuits 03 to 24.。

相关文档
最新文档