Smart-SAS 用户手册
宏杉存储MS系列设备配置手册
宏杉存储 MS 系列存储设备基础配置手册图形界面用户手册目录MacroSAN MS 系列存储设备基础配置......................................................1-1 图形界面用户手册 ....................................................................... 1-1 声明....................................................................................1-2 商标信息................................................................................1-3 目录....................................................................................1-4 图目录..................................................................................1-8 表目录................................................................................ 1-13 第一部分：概述........................................................................ 1-14 1 前言................................................................................ 1-141.1 读者对象........................................................................... 1-141.2 资料指南........................................................................... 1-141.3 资料约定........................................................................... 1-141.3.1 资料描述约定................................................................. 1-141.3.2 其他约定..................................................................... 1-151.4 资料获取方式....................................................................... 1-151.5 资料意见反馈方式................................................................... 1-151.6 文档结构........................................................................... 1-152 ODSP 存储设备概述 .................................................................. 2-162.1 ODSP 存储设备简介................................................................. 2-162.2 ODSP 存储设备典型组网介绍......................................................... 2-173 ODSP Scope 控制台.................................................................. 3-183.1 ODSP Scope 简介................................................................... 3-183.2 运行ODSP Scope 前准备工作........................................................ 3-183.2.1 ODSP Scope 要求............................................................. 3-183.2.2 搭建管理网络................................................................. 3-193.3 运行ODSP Scope ........................................................................................................................... 3-193.3.1 安装JRE ............................................................................................................................... 3-193.3.2 打开ODSP Scope ................................................................................................................ 3-223.3.3 ODSP Scope 界面介绍......................................................... 3-243.3.4 查看ODSP Scope 版本及版权 .................................................. 3-253.3.5 管理设备..................................................................... 3-26 第二部分：基础配置.................................................................... 3-28 4基础配置简介 ........................................................................ 4-28 5 系统管理 ............................................................................ 5-285.1 简介............................................................................... 5-285.1.1 打开系统管理窗口............................................................. 5-285.1.2 系统管理窗口界面介绍......................................................... 5-295.2 快速配置设备向导................................................................... 5-305.3 快速配置资源向导................................................................... 5-325.4 管理License .................................................................................................................................... 5-355.5 管理网络........................................................................... 5-365.5.1 配置端口..................................................................... 5-365.5.2 配置静态路由................................................................. 5-395.5.3 配置默认网关................................................................. 5-415.5.4 配置聚合端口模式............................................................. 5-415.6 管理用户........................................................................... 5-425.6.1 管理用户..................................................................... 5-425.6.2 管理登录会话................................................................. 5-445.7 管理告警方式....................................................................... 5-445.7.1 修改邮件告警设置............................................................. 5-445.7.2 修改蜂鸣器告警设置........................................................... 5-465.7.3 修改SNMP Trap 设置.......................................................... 5-475.7.4 配置告警语言................................................................. 5-485.7.5 修改告警事件设置............................................................. 5-495.7.6 控制台告警................................................................... 5-505.7.7 指示灯告警................................................................... 5-506 资源管理 ............................................................................ 6-506.1 简介............................................................................... 6-506.2 管理设备基本信息................................................................... 6-516.2.1 查看设备详细信息............................................................. 6-516.2.2 重命名设备................................................................... 6-516.2.3 修改设备备注................................................................. 6-526.2.4 修改设备时间................................................................. 6-536.2.5 停止蜂鸣..................................................................... 6-536.3 管理物理资源....................................................................... 6-546.3.1 物理资源简介................................................................. 6-546.3.2 物理资源命名规则介绍......................................................... 6-556.3.3 管理SPU 和SP ............................................................................................................................... 6-576.3.4 管理DSU 和EP .................................................................................................................... 6-626.3.5 管理磁盘..................................................................... 6-656.3.6 管理全局热备盘............................................................... 6-696.4 管理存储池......................................................................... 6-706.4.1 存储池简介................................................................... 6-706.4.2 查看存储池信息............................................................... 6-716.4.3 创建存储池................................................................... 6-726.4.4 删除存储池................................................................... 6-746.4.5 修改存储池属性............................................................... 6-746.4.6 创建RAID ............................................................................................................................. 6-756.4.7 删除RAID ............................................................................................................................. 6-776.4.8 修改RAID 属性 ............................................................... 6-786.4.9 管理RAID 专用热备盘 ......................................................... 6-806.4.10 RAID 重建...................................................................... 6-816.4.11 创建LUN................................................................................................................................... 6-826.4.12 扩容LUN................................................................................................................................... 6-846.4.13 删除LUN................................................................................................................................... 6-866.4.14 修改LUN 属性............................................................... 6-866.4.15 LUN 同步 ................................................................... 6-92 6.5 管理客户端......................................................................... 6-946.5.1 客户端简介................................................................... 6-946.5.2 创建客户端................................................................... 6-956.5.3 删除客户端................................................................... 6-976.5.4 修改客户端属性............................................................... 6-976.5.5 管理Initiator ........................................................................................................................ 6-1006.5.6 为客户端关联/取消关联Initiator .......................................................................................... 6-1036.5.7 创建Target ......................................................................................................................... 6-1046.5.8 删除Target ......................................................................................................................... 6-1066.5.9 修改Target 属性 ............................................................. 6-1066.5.10 为Target 关联/取消关联LUN ............................................................................................... 6-1097 高级设置 ........................................................................... 7-1117.1 简介.............................................................................. 7-1117.1.1 打开高级设置窗口............................................................ 7-1117.1.2 高级设置窗口界面介绍........................................................ 7-1127.2 设置缓存全局参数.................................................................. 7-1137.2.1 修改缓存全局参数............................................................ 7-1137.2.2 修改写缓存刷新策略.......................................................... 7-1147.3 设置热备盘全局参数................................................................ 7-1157.4 设置HA 全局参数.................................................................. 7-1157.4.1 修改HA 自动恢复选项 ........................................................ 7-1157.4.2 修改HA 自监测策略 .......................................................... 7-1167.4.3 修改HA 心跳监测策略 ........................................................ 7-1167.4.4 设置登录安全参数............................................................ 7-1177.4.5 设置登录密码有效期.......................................................... 7-1177.4.6 设置登录失败锁定阈值........................................................ 7-1177.4.7 设置登录时间范围............................................................ 7-1187.4.8 设置登录管理PC 标识 ........................................................ 7-1187.4.9 设置以太网端口登录开关 ...................................................... 7-1197.5 设置使用安全参数.................................................................. 7-1197.5.1 设置用户密码复杂规则........................................................ 7-1197.5.2 设置用户重复密码检查范围 .................................................... 7-1207.5.3 设置GUI 审计日志开关........................................................ 7-120 8例行检查与维护 ..................................................................... 8-1218.1 简介.............................................................................. 8-1218.1.1 打开维护中心窗口............................................................ 8-1218.1.2 维护中心窗口界面介绍........................................................ 8-1228.2 查看告警状态/记录..................................................................... 8-1238.2.1 查看设备告警记录............................................................ 8-1238.2.2 查看设备数据冗余状态........................................................ 8-1248.2.3 查看邮件告警记录............................................................ 8-1258.2.4 查看蜂鸣器告警记录.......................................................... 8-1268.2.5 查看SNMP Trap 记录......................................................... 8-1278.3 导出/导入文件 ..................................................................... 8-1288.3.2 导出文件.................................................................... 8-1288.3.3 导入文件.................................................................... 8-1298.4 重启/关机 ......................................................................... 8-1308.5 HA 接管/恢复...................................................................... 8-1308.5.3 HA 恢复..................................................................... 8-1328.6 升级系统软件...................................................................... 8-1328.6.1 查看设备版本信息............................................................ 8-1328.6.2 升级系统软件................................................................ 8-1339 操作实例 ........................................................................... 9-133 附录A. 术语..................................................................... 9-142 附录B. 缩略语................................................................... 9-147 附录C. 系统默认值............................................................... 9-149 附录D. 系统规格................................................................. 9-149图目录图2-1 ODSP 存储设备典型组网.......................................................... 2-17 图3-1 浏览器界面...................................................................... 3-20 图3-2 安装加载项界面 .................................................................. 3-21 图3-3 安装Java 软件界面............................................................... 3-22 图3-4 运行并下载ODSP Scope 界面...................................................... 3-23 图3-5 ODSP Scope 设备管理界面........................................................ 3-23 图3-6 ODSP Scope 界面说明（一）...................................................... 3-24 图3-7 ODSP Scope 界面说明（二）...................................................... 3-24 图3-8 关于ODSP Scope 界面 ........................................................... 3-26 图3-9 添加存储设备界面 ................................................................ 3-26 图3-10 用户登录界面 ................................................................... 3-27 图5-1 系统管理主界面 .................................................................. 5-29 图5-2 系统管理界面说明 ................................................................ 5-30 图5-3 启动快速配置设备向导界面 ........................................................ 5-30 图5-4 快速配置设备向导界面（一） ...................................................... 5-31 图5-5 快速配置设备向导界面（二） ...................................................... 5-32 图5-6 启动快速配置资源向导界面 ........................................................ 5-32 图5-7 快速配置资源向导界面（一） ...................................................... 5-33 图5-8 快速配置资源向导界面（二） ...................................................... 5-34 图5-9 快速配置资源向导界面（三） ...................................................... 5-35 图5-10 管理License 界面 ............................................................... 5-36 图5-11 配置网络界面 ................................................................... 5-36 图5-12 创建聚合端口界面 ............................................................... 5-37 图5-13 修改端口设置界面 ............................................................... 5-39 图5-14 配置静态路由界面 ............................................................... 5-40 图5-15 添加路由界面 ................................................................... 5-40 图5-16 配置默认网关界面 ............................................................... 5-41 图5-17 配置聚合端口模式界面 ........................................................... 5-42 图5-18 管理用户界面 ................................................................... 5-42 图5-19 创建用户界面 ................................................................... 5-43 图5-20 修改用户密码界面 ............................................................... 5-44 图5-21 管理登录会话界面 ............................................................... 5-44图5-24 配置蜂鸣器告警界面 ............................................................. 5-46 图5-25 配置SNMP Trap 界面............................................................ 5-47 图5-26 添加接收者界面 ................................................................. 5-47 图5-27 配置告警语言界面 ............................................................... 5-48 图5-28 配置告警事件界面（一） ......................................................... 5-49 图5-29 配置告警事件界面（二） ......................................................... 5-49 图6-1 设备树树状视图说明.............................................................. 6-50 图6-2 设备基本属性界面................................................................ 6-51 图6-3 重命名设备界面.................................................................. 6-52 图6-4 修改设备备注界面................................................................ 6-52 图6-5 修改设备时间界面................................................................ 6-53 图6-6 停止蜂鸣界面.................................................................... 6-53 图6-7 查看物理设备列表界面............................................................ 6-54 图6-8 查看物理资源汇总信息界面 ........................................................ 6-55 图6-9 SPU 基本属性界面................................................................ 6-57 图6-10 SP 基本属性界面................................................................ 6-58 图6-11 查看物理端口列表界面 ........................................................... 6-59 图6-12 端口详细信息界面............................................................... 6-60 图6-13 修改连接模式界面............................................................... 6-60 图6-14 查看设备日志界面............................................................... 6-61 图6-15 查看设备审计日志界面 ........................................................... 6-62 图6-16 查看DSU 列表界面.............................................................. 6-63 图6-17 DSU 基本属性界面............................................................... 6-64 图6-18 EP 基本属性界面................................................................ 6-65 图6-19 磁盘汇总信息界面............................................................... 6-66 图6-20 磁盘基本属性界面............................................................... 6-67 图6-21 批量安全拔盘界面............................................................... 6-68 图6-22 指定磁盘槽位安全拔盘界面 ....................................................... 6-69 图6-23 查看磁盘S.M.A.R.T 信息界面..................................................... 6-69 图6-24 配置全局热备盘界面............................................................. 6-70 图6-25 查看存储池列表界面............................................................. 6-72 图6-26 存储池的资源汇总信息界面 ....................................................... 6-72 图6-27 创建存储池界面................................................................. 6-73图6-30 创建RAID 界面.................................................................. 6-76 图6-31 批量删除RAID 界面 ............................................................. 6-78 图6-32 查看RAID 列表界面.............................................................. 6-78 图6-33 RAID 基本属性界面.............................................................. 6-79 图6-34 重命名RAID 界面 ............................................................... 6-80 图6-35 配置专用热备盘界面............................................................. 6-80 图6-36 RAID 重建任务信息界面.......................................................... 6-81 图6-37 修改重建优先级界面............................................................. 6-82 图6-38 创建LUN 界面 .................................................................. 6-83 图6-39 扩容LUN 界面 .................................................................. 6-85 图6-40 批量删除LUN 界面 .............................................................. 6-86 图6-41 查看LUN 列表界面 .............................................................. 6-87 图6-42 LUN 基本属性界面............................................................... 6-88 图6-43 重命名LUN 界面 ................................................................ 6-89 图6-44 修改LUN 读缓存分配策略界面 .................................................... 6-90 图6-45 修改LUN 读缓存预读策略界面 .................................................... 6-91 图6-46 修改LUN 写缓存分配策略界面 .................................................... 6-92 图6-47 LUN 同步任务信息界面........................................................... 6-93 图6-48 开始LUN 同步界面 .............................................................. 6-94 图6-49 创建客户端界面................................................................. 6-96 图6-50 查看客户端列表界面............................................................. 6-97 图6-51 客户端的资源汇总信息界面 ....................................................... 6-98 图6-52 客户端基本属性界面............................................................. 6-98 图6-53 重命名客户端界面............................................................... 6-99 图6-54 修改客户端描述界面............................................................. 6-99 图6-55 修改客户端权限界面............................................................ 6-100 图6-56 添加Initiator 界面............................................................... 6-100 图6-57 查看Initiator 列表界面........................................................... 6-102 图6-58 修改Initiator 属性界面........................................................... 6-102 图6-59 为客户端关联Initiator 界面....................................................... 6-103 图6-60 为客户端取消关联Initiator 界面...................................................... 6-104 图6-61 创建Target 界面................................................................ 6-105 图6-62 Target 基本属性界面............................................................ 6-106图6-64 修改Target 绑定地址界面........................................................ 6-108 图6-65 设置Target 双向CHAP 认证界面................................................. 6-109 图6-66 关联LUN 界面 ................................................................. 6-110 图6-67 取消关联LUN 界面 ............................................................. 6-111 图7-1 高级设置界面................................................................... 7-112 图7-2 高级设置界面说明 ............................................................... 7-113 图7-3 设置缓存全局参数界面 ........................................................... 7-114 图7-4 设置写缓存刷新策略界面 ......................................................... 7-115 图7-5 设置空白磁盘热备界面 ........................................................... 7-115 图7-6 设置HA 自动恢复选项界面........................................................ 7-116 图7-7 设置HA 自监测策略界面.......................................................... 7-116 图7-8 设置HA 心跳监测策略界面........................................................ 7-117 图7-9 设置登录密码有效期界面 ......................................................... 7-117 图7-10 设置登录失败锁定阈值界面 ...................................................... 7-118 图7-11 设置登录时间范围界面 .......................................................... 7-118 图7-12 设置登录管理PC 标识界面....................................................... 7-119 图7-13 设置以太网端口登录开关界面 .................................................... 7-119 图7-14 设置用户密码复杂度规则界面 .................................................... 7-120 图7-15 设置用户重复密码检查范围界面 .................................................. 7-120 图7-16 设置GUI 审计日志开关界面...................................................... 7-121 图8-1 维护中心界面................................................................... 8-122 图8-2 维护中心界面说明 ............................................................... 8-123 图8-3 查看设备告警状态界面（一） ..................................................... 8-123 图8-4 查看设备告警状态界面（二） ..................................................... 8-124 图8-5 查看设备数据冗余状态界面（一） ................................................. 8-124 图8-6 查看设备数据冗余状态界面（二） ................................................. 8-125 图8-9 查看蜂鸣器告警记录界面（一） ................................................... 8-126 图8-10 查看蜂鸣器告警记录界面（二） .................................................. 8-127 图8-11 查看SNMP Trap 记录界面（一）................................................. 8-127 图8-12 查看SNMP Trap 记录界面（二）................................................. 8-128 图8-13 导出/导入文件界面.............................................................. 8-128 图8-14 导出文件界面（二） ............................................................ 8-129 图8-15 导入配置文件界面 .............................................................. 8-129 图8-16 重启/关机界面.................................................................. 8-130图8-18 查看设备HA 状态界面（二）..................................................... 8-131 图8-19 HA 接管界面（一）............................................................. 8-131 图8-20 HA 接管界面（二）............................................................. 8-132 图8-21 HA 恢复界面................................................................... 8-132 图8-22 查看设备版本信息界面 .......................................................... 8-132 图9-1 资源配置流程示意图............................................................. 9-133 图9-2 创建传统型存储池示意图 ......................................................... 9-134 图9-3 创建RAID 示意图................................................................ 9-135 图9-4 创建LUN 示意图 ................................................................ 9-136 图9-5 创建Client 示意图............................................................... 9-137 图9-6 创建Initiator 示意图.............................................................. 9-138 图9-7 为客户端关联Initiator 示意图...................................................... 9-139 图9-8 创建Target 示意图............................................................... 9-140 图9-9 为Target 关联LUN 示意图........................................................ 9-141表目录表1-1 用户手册清单.................................................................... 1-14 表1-2 文档结构........................................................................ 1-15 表3-1 ODSP Scope 兼容性列表.......................................................... 3-18 表3-2 Java 兼容性列表 ................................................................. 3-19 表3-3 ODSP Scope 界面组件说明........................................................ 3-25 表5-1 配置设备名称和备注界面参数说明.................................................. 5-31 表5-2 创建聚合端口界面参数说明........................................................ 5-37 表5-3 修改端口设置界面参数说明........................................................ 5-39 表5-4 添加静态路由界面参数说明........................................................ 5-41 表5-5 创建用户界面参数说明............................................................ 5-43 表5-6 设置邮件告警界面参数说明........................................................ 5-45 表5-7 配置SNMP Trap 界面参数说明..................................................... 5-48 表6-1 重命名设备界面参数说明.......................................................... 6-52 表6-2 修改设备备注界面参数说明........................................................ 6-52 表6-3 创建存储池界面参数说明.......................................................... 6-73 表6-4 存储池信息显示区页签列表........................................................ 6-74 表6-5 创建RAID 界面参数说明 .......................................................... 6-76 表6-6 RAID 信息显示区页签列表......................................................... 6-77 表6-7 创建LUN 界面参数说明........................................................... 6-83 表6-8 LUN 信息显示区页签列表.......................................................... 6-84 表6-9 扩容LUN 界面参数说明........................................................... 6-85 表6-10 客户端访问权限定义............................................................. 6-94 表6-11 创建客户端界面参数说明......................................................... 6-96 表6-12 客户端信息显示区页签列表....................................................... 6-97 表6-13 添加Initiator 界面参数说明 ...................................................... 6-101 表6-14 修改Initiator 属性界面参数说明................................................... 6-102 表6-15 创建Target 界面参数说明....................................................... 6-105 表6-16 Target 信息显示区页签列表...................................................... 6-106 表6-17 设置Target 双向CHAP 认证界面参数说明......................................... 6-109 表9-1 系统默认值..................................................................... 9-149 表9-2 系统规格....................................................................... 9-149。
Molex紧凑微型SAS连接器 说明书
连接器拔脱力 (最小值) ： 2.5牛顿 (插接设备插头)
端口1的部件 保持力 (最小值) ：3.50牛顿
端口2部件 保持力 (最小值) ：2.20牛顿
插拔次数 (最小值) ： 500次 (背板/盲插)
物理参数
塑壳：玻纤填充型液晶聚合物 (LCP)，符合美国UL 94- 0阻燃 级别，黑色
特点和优点
• 微 型SAS连接器占用面积小，可节 省更多印刷电路板空间。
• 满 足SAS 2.0规范要求，传输速率 可高达6Gbps
• 完 全兼容Molex微型SATA连接器， 并可以插接外壳上带有中间肋的 SATA部件
• 微 型SAS插头用于1.8 英寸小型硬 盘驱动器 (固态硬盘或常规硬盘) - 主机背板上的插座可对接Molex 微型SAS或微型SATA驱动器 - 驱动器在制造时就可以配备 Molex任意一种微型SAS或微 型SATA插头，并可进行SAS或 SATA固件编程
• 插 头上的抗压肋和插座上的双形固 定栓分别为跨装插头和立式插座增 加抓板力
• 7 8528系列插头塑壳在焊尾区设有 驱动器支座外壳，是塑壳的特色 功能
• 连 接器上的极性键和导轨可防止部 件插接不当，并确保插头顺利插入 插座
Molex微型 SAS插头和插座系列产品
应用场合
• 存 储驱动器 – 固态硬盘 (SSD) – 1.8英寸硬盘
电气参数 电压 (最大值) ：30伏 电流 (最大值) ：1.5安培直流
或在60赫兹下的交流 (有效值) 低接触电阻 (最小值)
：45毫欧 (初次插接) (78395、78396) ：60毫欧 (初次插接) (78495) 介质耐电压： 500伏交流 绝缘电阻 (最小值) ： 1000千兆欧
宏杉存储MS系列镜像双活配置手册
宏杉存储MS系列镜像和对称双活特性配置手册图形界面用户手册目录MacroSAN MS 系列存储设备镜像和对称双活特性............................................1-1 图形界面用户手册 ....................................................................... 1-1 声明....................................................................................1-2 商标信息................................................................................1-3 目录....................................................................................1-4 图目录..................................................................................1-6 表目录..................................................................................1-8 第一部分：概述..........................................................................1-9 1 前言..................................................................................1-91.1 读者对象............................................................................ 1-91.2 资料指南............................................................................ 1-91.3 资料约定............................................................................ 1-91.3.1 资料描述约定.................................................................. 1-91.3.2 其他约定..................................................................... 1-101.4 资料获取方式....................................................................... 1-101.5 资料意见反馈方式................................................................... 1-101.6 文档结构........................................................................... 1-102 ODSP 存储设备概述 .................................................................. 2-122.1 ODSP 存储设备简介................................................................. 2-122.2 ODSP 存储设备典型组网介绍......................................................... 2-123 ODSP Scope 控制台.................................................................. 3-133.1 ODSP Scope 简介................................................................... 3-133.2 运行ODSP Scope 前准备工作........................................................ 3-143.2.1 ODSP Scope 要求............................................................. 3-143.2.2 搭建管理网络................................................................. 3-153.3 运行ODSP Scope ........................................................................................................................... 3-153.3.1 安装JRE ............................................................................................................................... 3-153.3.2 打开ODSP Scope ................................................................................................................ 3-183.3.3 ODSP Scope 界面介绍......................................................... 3-203.3.4 查看ODSP Scope 版本及版权 .................................................. 3-213.3.5 管理设备..................................................................... 3-22 第二部分：镜像和对称双活特性.......................................................... 3-24 4镜像和对称双活特性简介 .............................................................. 4-244.1 镜像简介........................................................................... 4-244.2 对称双活简介....................................................................... 4-264.3 镜像和对称双活的差异说明........................................................... 4-274.4 镜像和对称双活关键术语............................................................. 4-28 5配置SDAS 设备对.................................................................... 5-295.1 配置SDAS 前准备 .................................................................. 5-295.1.1 激活镜像/对称双活License .................................................................................................. 5-295.1.2 配置/检查网络................................................................. 5-295.2 创建SDAS ...................................................................................................................................... 5-305.3 解除SDAS ...................................................................................................................................... 5-335.4 修改SDAS ...................................................................................................................................... 5-345.4.1 查看SDAS 基本属性........................................................... 5-345.4.2 查看引擎上SDAS 属性......................................................... 5-345.4.3 重命名SDAS ........................................................................................................................ 5-355.4.4 更新对端引擎名称............................................................. 5-365.4.5 修改SDAS 链路地址........................................................... 5-365.5 配置SDAS 中镜像同步流控功能....................................................... 5-37 6配置镜像对 .......................................................................... 6-386.1 配置镜像对相关操作................................................................. 6-396.1.1 新建LUN ..................................................................................................................................... 6-396.1.2 管理快照资源................................................................. 6-426.2 启用镜像........................................................................... 6-426.3 禁用镜像........................................................................... 6-456.3.1 禁用单个LUN 的镜像.......................................................... 6-456.3.2 批量禁用多个LUN 的镜像...................................................... 6-456.4 管理镜像........................................................................... 6-466.4.1 查看镜像对详细信息........................................................... 6-466.4.2 挂起/恢复镜像................................................................. 6-476.4.3 手动反转镜像................................................................. 6-496.5 对称双活特性自动反转镜像说明....................................................... 6-49 附录A. 术语...................................................................... 6-51 附录B. 缩略语.................................................................... 6-56 附录C. 系统默认值................................................................ 6-58图目录图2-1 ODSP 存储设备典型组网.......................................................... 2-13 图3-1 浏览器界面...................................................................... 3-16 图3-2 安装加载项界面.................................................................. 3-17 图3-3 安装Java 软件界面............................................................... 3-18 图3-4 运行并下载ODSP Scope 界面 ..................................................... 3-19 图3-5 ODSP Scope 设备管理界面........................................................ 3-19 图3-6 ODSP Scope 界面说明（一）...................................................... 3-20 图3-7 ODSP Scope 界面说明（二）...................................................... 3-20 图3-8 关于ODSP Scope 界面 ........................................................... 3-22 图3-9 添加存储设备界面................................................................ 3-22 图3-10 用户登录界面................................................................... 3-23 图4-1 镜像特性典型组网图（镜像私有网络采用MESH 直连方式）............................ 4-25 图4-2 镜像特性典型组网图（镜像私有网络采用交换机连接方式）............................. 4-26 图4-3 对称双活特性典型组网图 .......................................................... 4-27 图4-4 SDAS 私有网络链路编号示意图 .................................................... 4-28 图5-1 激活License 界面 ................................................................ 5-29 图5-2 创建SDAS 向导界面（一）........................................................ 5-31 图5-3 创建SDAS 向导界面（二）-MESH 直连方式......................................... 5-32 图5-4 创建SDAS 向导界面（二）-交换机连接方式 ......................................... 5-33 图5-5 创建SDAS 向导界面（三）........................................................ 5-33 图5-6 查看SDAS 基本属性界面.......................................................... 5-34 图5-7 查看引擎上SDAS 属性界面........................................................ 5-35 图5-8 重命名SDAS 界面................................................................ 5-36 图5-9 修改链路地址界面................................................................ 5-37 图5-10 设置镜像同步流控参数界面 ....................................................... 5-38 图6-1 创建LUN 向导界面（一） ......................................................... 6-39 图6-2 创建LUN 向导界面（二） ......................................................... 6-40 图6-3 创建LUN 向导界面（三） ......................................................... 6-41 图6-4 创建LUN 向导界面（四） ......................................................... 6-42 图6-5 启用镜像向导界面（一） .......................................................... 6-43 图6-6 启动镜像向导界面（二） .......................................................... 6-44 图6-7 启动镜像向导界面（三） .......................................................... 6-45 图6-8 批量禁用镜像界面................................................................ 6-46图6-9 查看主LUN 镜像详细信息界面...................................................... 6-46 图6-10 查看镜像LUN 镜像详细信息界面................................................... 6-47 图6-11 批量挂起镜像界面 ............................................................... 6-48 图6-12 批量恢复镜像界面 ............................................................... 6-48 图6-13 批量反转镜像界面 ............................................................... 6-49表目录表1-1 用户手册清单......................................................................1-9 表1-2 文档结构........................................................................ 1-10 表3-1 ODSP Scope 兼容性列表.......................................................... 3-14 表3-2 Java 兼容性列表.................................................................. 3-14 表3-3 ODSP Scope 界面组件说明........................................................ 3-21 表4-1 镜像和对称双活的差异说明 ........................................................ 4-27 表5-1 创建SDAS 向导界面（一）参数说明................................................ 5-31 表5-2 创建SDAS 向导界面（二）参数说明................................................ 5-33 表5-3 重命名SDAS 界面参数说明........................................................ 5-36 表5-4 设置镜像同步流控参数界面参数说明 ................................................ 5-38 表6-1 创建LUN 向导界面（二）参数说明 ................................................. 6-40 表6-2 创建LUN 向导界面（三）参数说明 ................................................. 6-41 表6-3 设置快照策略界面参数说明 ........................................................ 6-43 表6-4 系统默认值...................................................................... 6-58第一部分：概述1前言1.1 读者对象图形界面用户手册用于指导MacroSAN MS 系列存储设备的配置、管理和维护等操作，适用于MacroSAN 员工、合作伙伴、存储架构师、系统管理员、维护人员，要求读者熟悉存储系统相关基础知识。
sas使用手册
sas使用手册SAS（Statistical Analysis System）是一款广泛使用的统计分析软件，其使用手册对于使用者来说是不可或缺的指南。
以下是一个简短的SAS使用手册，以帮助您快速了解其基本功能和操作。
一、概述SAS是一个模块化、集成化的软件系统，主要用于数据管理、统计分析、预测建模和报告生成。
它支持多种编程语言，包括SAS语言、SAS宏语言和SAS SQL语言，使得用户可以根据自己的需求进行定制化操作。
二、安装与启动要使用SAS，您需要先将其安装到您的计算机上。
您可以从SAS官网下载适合您操作系统的安装程序，并按照屏幕提示进行安装。
安装完成后，您可以通过启动SAS Enterprise Guide或SAS Studio来使用SAS。
三、数据管理SAS提供了一系列数据管理工具，可以帮助您导入、清洗、合并和转换数据。
您可以使用DATA步来创建、修改和删除数据集，使用SQL语言进行更高级的数据查询和操作。
四、统计分析SAS提供了广泛的统计分析方法，包括描述性统计、方差分析、回归分析、聚类分析、主成分分析等。
您可以使用PROC步来调用相应的过程，并指定所需的参数和选项。
例如，要执行回归分析，您可以编写以下代码：PROC REG DATA=your_dataset; MODELdependent_variable = independent_variable / VIF; RUN;五、模型构建与预测SAS提供了多种预测模型，包括线性回归模型、逻辑回归模型、决策树模型、神经网络模型等。
您可以使用PROC步来构建和评估模型，例如：PROC SVM DATA=your_dataset; CLASS target_variable; MODEL dependent_variable = independent_variable; CROSSVALIDATE; RUN;六、报告生成SAS支持将分析结果导出为各种格式的报告，包括HTML、PDF、Word等。
sas enterprise miner操作手册英文版目录
Applied Analytics Using SAS® Enterprise Miner™Course NotesApplied Analytics Using SAS® Enterprise Miner™ Course Notes was developed by Peter Christie, Jim Georges, Jeff Thompson, and Chip Wells. Additional contributions were made by Tom Bohannon, Mike Hardin, Dan Kelly, Bob Lucas, and Sue Walsh. Editing and production support was provided by the Curriculum Development and Support Department.SAS and all other SAS Institute Inc. product or service names are registered trademarks or trademarks of SAS Institute Inc. in the USA and other countries. ® indicates USA registration. Other brand and product names are trademarks of their respective companies.Applied Analytics Using SAS® Enterprise Miner™ Course NotesCopyright © 2011 SAS Institute Inc. Cary, NC, USA. All rights reserved. Printed in the United States of America. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of the publisher, SAS Institute Inc.Book code E2056, course code LWAAEM71/AAEM71, prepared date 18Oct2011. LWAAEM71_001ISBN 978-1-61290-139-8For Your Information iii Table of ContentsCourse Description (x)Prerequisites (xi)Chapter 1 Introduction ......................................................................................... 1-11.1 Introduction to SAS Enterprise Miner ............................................................................. 1-31.2 Solutions ........................................................................................................................ 1-24Solutions to Student Activities (Polls/Quizzes) ...................................................... 1-24 Chapter 2 Accessing and Assaying Prepared Data ........................................... 2-12.1 Introduction ...................................................................................................................... 2-32.2 Creating a SAS Enterprise Miner Project, Library, and Diagram ................................... 2-5Demonstration: C reating a SAS Enterprise Miner Project ....................................... 2-6Demonstration: C reating a SAS Library ................................................................. 2-10Demonstration: C reating a SAS Enterprise Miner Diagram ................................... 2-12Exercises ................................................................................................................. 2-132.3 Defining a Data Source .................................................................................................. 2-14Demonstration: D efining a Data Source ................................................................. 2-18Exercises ................................................................................................................. 2-332.4 Exploring a Data Source ................................................................................................ 2-34Demonstration: E xploring Source Data .................................................................. 2-35Demonstration: C hanging the Explore Window Sampling Defaults ...................... 2-59Exercises ................................................................................................................. 2-61Demonstration: M odifying and Correcting Source Data ........................................ 2-622.5 Chapter Summary .......................................................................................................... 2-742.6 Solutions ........................................................................................................................ 2-75iv For Your InformationSolutions to Exercises ............................................................................................. 2-75Solutions to Student Activities (Polls/Quizzes) ...................................................... 2-76 Chapter 3 Introduction to Predictive Modeling: Decision Trees ....................... 3-1 3.1 Introduction ...................................................................................................................... 3-3Demonstration: C reating Training and Validation Data .......................................... 3-23 3.2 Cultivating Decision Trees ............................................................................................ 3-28Demonstration: C onstructing a Decision Tree Predictive Model ........................... 3-43 3.3 Optimizing the Complexity of Decision Trees .............................................................. 3-61Demonstration: A ssessing a Decision Tree ............................................................. 3-77 3.4 Understanding Additional Diagnostic Tools (Self-Study) ............................................. 3-88Demonstration: U nderstanding Additional Plots and Tables (Optional) ................ 3-89 3.5 Autonomous Tree Growth Options (Self-Study) ........................................................... 3-94Exercises ............................................................................................................... 3-102 3.6 Chapter Summary ........................................................................................................ 3-104 3.7 Solutions ...................................................................................................................... 3-105Solutions to Exercises ........................................................................................... 3-105Solutions to Student Activities (Polls/Quizzes) .................................................... 3-120 Chapter 4 Introduction to Predictive Modeling: Regressions ........................... 4-1 4.1 Introduction ...................................................................................................................... 4-3Demonstration: M anaging Missing Values ............................................................. 4-18Demonstration: R unning the Regression Node ....................................................... 4-24 4.2 Selecting Regression Inputs ........................................................................................... 4-28Demonstration: S electing Inputs ............................................................................. 4-32 4.3 Optimizing Regression Complexity ............................................................................... 4-38Demonstration: O ptimizing Complexity ................................................................. 4-40For Your Information v 4.4 Interpreting Regression Models ..................................................................................... 4-49Demonstration: I nterpreting a Regression Model ................................................... 4-514.5 Transforming Inputs ...................................................................................................... 4-52Demonstration: T ransforming Inputs ...................................................................... 4-564.6 Categorical Inputs .......................................................................................................... 4-66Demonstration: R ecoding Categorical Inputs ......................................................... 4-694.7 Polynomial Regressions (Self-Study) ............................................................................ 4-75Demonstration: A dding Polynomial Regression Terms Selectively ....................... 4-77Demonstration: A dding Polynomial Regression Terms Autonomously(Self-Study) ................................................................................... 4-85 Exercises ................................................................................................................. 4-884.8 Chapter Summary .......................................................................................................... 4-894.9 Solutions ........................................................................................................................ 4-91Solutions to Exercises ............................................................................................. 4-91Solutions to Student Activities (Polls/Quizzes) .................................................... 4-104 Chapter 5 Introduction to Predictive Modeling: Neural Networks andOther Modeling Tools ......................................................................... 5-15.1 Introduction ...................................................................................................................... 5-3Demonstration: T raining a Neural Network ........................................................... 5-125.2 Input Selection ............................................................................................................... 5-20Demonstration: S electing Neural Network Inputs .................................................. 5-215.3 Stopped Training ............................................................................................................ 5-24Demonstration: I ncreasing Network Flexibility ..................................................... 5-35Demonstration: U sing the AutoNeural Tool (Self-Study) ....................................... 5-395.4 Other Modeling Tools (Self-Study) ............................................................................... 5-46Exercises ................................................................................................................. 5-585.5 Chapter Summary .......................................................................................................... 5-59vi For Your Information5.6 Solutions ........................................................................................................................ 5-60Solutions to Exercises ............................................................................................. 5-60Solutions to Student Activities (Polls/Quizzes) ...................................................... 5-63 Chapter 6 Model Assessment .............................................................................. 6-1 6.1 Model Fit Statistics .......................................................................................................... 6-3Demonstration: C omparing Models with Summary Statistics .................................. 6-6 6.2 Statistical Graphics .......................................................................................................... 6-9Demonstration: C omparing Models with ROC Charts ........................................... 6-13Demonstration: C omparing Models with Score Rankings Plots ............................ 6-19Demonstration: A djusting for Separate Sampling .................................................. 6-22 6.3 Adjusting for Separate Sampling ................................................................................... 6-29Demonstration: A djusting for Separate Sampling (Continued) .............................. 6-32Demonstration: C reating a Profit Matrix ................................................................ 6-35 6.4 Profit Matrices ............................................................................................................... 6-44Demonstration: E valuating Model Profit ................................................................ 6-47Demonstration: V iewing Additional Assessments .................................................. 6-49Demonstration: O ptimizing with Profit (Self-Study) .............................................. 6-52Exercises ................................................................................................................. 6-54 6.5 Chapter Summary .......................................................................................................... 6-55 6.6 Solutions ........................................................................................................................ 6-56Solutions to Exercises ............................................................................................. 6-56Solutions to Student Activities (Polls/Quizzes) ...................................................... 6-59 Chapter 7 Model Implementation ........................................................................ 7-1 7.1 Introduction ...................................................................................................................... 7-3 7.2 Internally Scored Data Sets ............................................................................................. 7-5Demonstration: C reating a Score Data Source ......................................................... 7-6For Your Information vii Demonstration: S coring with the Score Tool ............................................................ 7-7Demonstration: E xporting a Scored Table (Self-Study) ......................................... 7-107.3 Score Code Modules ...................................................................................................... 7-16Demonstration: C reating a SAS Score Code Module ............................................. 7-17Demonstration: C reating Other Score Code Modules ............................................ 7-23Exercises ................................................................................................................. 7-257.4 Chapter Summary .......................................................................................................... 7-267.5 Solutions to Exercises .................................................................................................... 7-27 Chapter 8 Introduction to Pattern Discovery ..................................................... 8-18.1 Introduction ...................................................................................................................... 8-38.2 Cluster Analysis ............................................................................................................... 8-8Demonstration: S egmenting Census Data ............................................................... 8-16Demonstration: E xploring and Filtering Analysis Data .......................................... 8-23Demonstration: S etting Cluster Tool Options ......................................................... 8-34Demonstration: C reating Clusters with the Cluster Tool ........................................ 8-38Demonstration: S pecifying the Segment Count ...................................................... 8-41Demonstration: E xploring Segments ...................................................................... 8-43Demonstration: P rofiling Segments ........................................................................ 8-53Exercises ................................................................................................................. 8-578.3 Market Basket Analysis (Self-Study)............................................................................. 8-59Demonstration: M arket Basket Analysis ................................................................. 8-63Demonstration: S equence Analysis ......................................................................... 8-79Exercises ................................................................................................................. 8-828.4 Chapter Summary .......................................................................................................... 8-848.5 Solutions ........................................................................................................................ 8-85Solutions to Exercises ............................................................................................. 8-85Solutions to Student Activities (Polls/Quizzes) ...................................................... 8-96viii For Your InformationChapter 9 Special Topics ..................................................................................... 9-1 9.1 Introduction ...................................................................................................................... 9-3 9.2 Ensemble Models ............................................................................................................. 9-4Demonstration: C reating Ensemble Models ............................................................. 9-5 9.3 Variable Selection ............................................................................................................ 9-9Demonstration: U sing the Variable Selection Node ............................................... 9-10Demonstration: U sing Partial Least Squares for Input Selection ........................... 9-14Demonstration: U sing the Decision Tree Node for Input Selection ....................... 9-19 9.4 Categorical Input Consolidation .................................................................................... 9-23Demonstration: C onsolidating Categorical Inputs .................................................. 9-24 9.5 Surrogate Models ........................................................................................................... 9-32Demonstration: D escribing Decision Segments with Surrogate Models ................ 9-33 9.6 SAS Rapid Predictive Modeler ...................................................................................... 9-39Demonstration: R unning a Basic RPM Model ....................................................... 9-41Demonstration: R unning an Intermediate RPM Model (Self-Study)...................... 9-50Demonstration: O pening an RPM Model in SAS Enterprise Miner ....................... 9-51Demonstration: R egistering an RPM Model ........................................................... 9-53Demonstration: S coring in SAS Enterprise Guide with a Registered Model ......... 9-54 Appendix A Case Studies ...................................................................................... A-1 A.1 Banking Segmentation Case Study ................................................................................. A-3 A.2 Web Site Usage Associations Case Study ..................................................................... A-19 A.3 Credit Risk Case Study ................................................................................................. A-22 A.4 Enrollment Management Case Study ............................................................................ A-40 Appendix B Bibliography ....................................................................................... B-1 B.1 References ....................................................................................................................... B-3For Your Information ix Appendix C Index ................................................................................................... C-1x For Your InformationCourse DescriptionThis course covers the skills required to assemble analysis flow diagrams using the rich tool set of SAS Enterprise Miner for both pattern discovery (segmentation, association, and sequence analyses) and predictive modeling (decision tree, regression, and neural network models).To learn more…For information on other courses in the curriculum, contact the SAS EducationDivision at 1-800-333-7660, or send e-mail to training@. You can alsofind this information on the Web at /training/ as well as in theTraining Course Catalog.For a list of other SAS books that relate to the topics covered in thisCourse Notes, USA customers can contact our SAS Publishing Department at1-800-727-3228 or send e-mail to sasbook@. Customers outside theUSA, please contact your local SAS office.Also, see the Publications Catalog on the Web at /pubs for acomplete list of books and a convenient order form.For Your Information xi PrerequisitesBefore attending this course, you should be acquainted with Microsoft Windows and Windows-based software. In addition, you should have at least an introductory-level familiarity with basic statistics and regression modeling. Previous SAS software experience is helpful but not required.xii For Your Information。
爱数电子文档安全管理存储系统6.0用户手册说明书
目录版权所有 (5)关于爱数 (6)前言 (7)第一章关于爱数电子文档安全管理存储系统6.0 (8)1.1 角色简介 (8)1.2 模块简介 (8)1.3 新增功能简介 (9)第二章Windows 客户端 (10)2.1 安装和登录 (11)2.1.1 安装和卸载 (11)2.1.2 登录Windows客户端 (12)2.1.3 Windows客户端设置 (14)2.2 Windows客户端简介 (19)2.2.1 界面简介 (19)2.2.2 文档简介 (20)2.2.3 托盘简介 (21)2.3 同步文档 (21)2.3.1 同步介绍 (21)2.3.2 上传文档 (23)2.3.3 下载文档 (24)2.3.4 预览文档 (24)2.4 授权文档 (25)2.4.1 内链授权 (26)2.4.2 取消授权 (28)2.5.1 审核简介 (29)2.5.2 审核流程 (29)2.6 团队协作 (30)2.6.1 群组授权 (30)2.6.2 文档库协作 (30)2.6.3 文件编辑锁定 (31)2.7 搜索文档 (31)2.8 找回文档 (33)2.8.1 历史版本 (33)2.8.2 回收站 (33)2.9管理文档 (34)2.9.1 文档密级管理 (34)2.9.2 设置文档标签 (35)2.10 收藏文档 (35)2.11 消息通知 (36)2.12 个人账号管理 (37)第三章网页访问 (38)3.1 网页登录 (40)3.2 网页简介 (40)3.2.1 界面简介 (40)3.2.2 文档简介 (41)3.3同步文档 (42)3.3.1 基本操作 (42)3.3.2 上传文档 (43)3.3.3 下载文档 (43)3.4.1 权限授权 (44)3.4.2 取消授权 (45)3.4.3 一键撤销授权 (46)3.5 授权审核 (46)3.5.1 审核简介 (46)3.5.2 审核流程 (46)3.6 收藏文档 (50)3.7 团队协作 (50)3.7.1 群组授权 (50)3.7.2 文档库协作 (52)3.7.3 在线编辑 (52)3.8 搜索文档 (53)3.9 找回文档 (54)3.9.1 回收站 (54)3.10 管理文档 (55)3.10.1 文档密级管理 (55)3.10.2 设置文档标签 (56)3.10.3 添加编目 (57)3.10.4 文档排序 (58)3.11 消息通知 (58)3.12 个人账号管理 (59)3.13 联系人管理 (60)版权所有版权所有©2006—2019 上海爱数信息技术股份有限公司。
SAS 使用手册
SAS使用手册概述视频网络服务器是安技新公司开发的数字视频监控管理中心。
SAS服务器不但可以增强网络安全系统的总体稳定性，并可通过实时网络备份进一步保障数据安全。
SAS服务器协调管理所有相连的数字录像机，按照预设的分组或对每台录像机单独进行控制和监视。
SAS1000服务器使用安技新独特的实时视频流技术，可同时对多台数字录像机进行实时备份。
即使数字录像机发生故障，用户也不需要担心会丢失重要的录像或数据。
SAS1000服务器另有独特的断点备份功能，在网络故障时也可保证影像的完整无缺。
用户可通过SAS1000服务器查看相连的数字录像机的状态、统计数据以及有关信息。
使用安技新SAS1000和CCMS（中控监视工作站），用户可以将数以百计的安技新网络数字录像机连接起来，进行大规模视频监控管理。
功能介绍¾硬盘管理，指定备份视频文件的目录¾支持同步网络并发备份并可调整存储视频的帧率¾独特的断点备份功能可保证意外事件后影像的完整无缺¾备份影像的回放支持时间搜索和事件浏览¾三工运行机制支持同时远程监控、并发备份和远程回放¾用户管理¾日志系统帮助跟踪查询所有操作和事件的历史¾提供良好的DVR管理：添加、删除、状态查询¾基于HTML和XML的远程操作界面灵活而简洁并支持多种语言工作流程1.登录SAS，三种用户：用户名：guest，密码：one。
用户名：operator，密码：two。
用户名：supervisor，密码：three。
为了激活SAS，使用supervisor 登录，如图1所示。
图 12.激活SAS，用户通过“申请授权码”输入产品序列号注册，单击“提交”按钮得到注册码后，与安技新交换授权码，操作界面如图2所示。
图 23.通过“硬盘管理” 指定一个硬盘备份路径。
图34.通过查看“服务器信息”得知DVR的最大使用数量。
高点6Gb s SAS SATA RAID HBA用户指南说明书
Administrators can designate unused drives to automatically take the place of failed units or configure the RocketRAID 4500 HBA to immediately initialize rebuild process by simply plugging in a new drive. Advanced management features allow customers to manage storageremotely via an internet connection or local network, and configure Email notification to inform one or more users of changing storage conditions while outside of the work environment. In addition, optional CLI packages are available for Linux distributions.Feature Highlights HighPoint 6Gb/s SAS Hardware RAID Solutions HighPoint RocketRAID 4500HBA’s were designed for professional Mac/PCworkstation environments and deliver the stability and sustained performancerequired by 3D or 4K Media Applications. These PCIe x8 2.0 6Gb/SAS/SATA 8-Channel RAID HBA’s support hardware RAID 0, 1, 5, 6, 10 and JBOD configurations. The low-profile form factor allows the HBA to be easily installed into a wide selection of server and workstation chassis. Superior Reliability RocketRAID 4500 series HBA’s provide an unprecedented level of reliability with an extensive selection of security, recovery, and maintenance features. Built-in NVRAM constantly tracks in-progress writes to preserve the integrity of data in the event of a drive failure or system crash, and streamline recovery procedures while minimizing downtime. The optional battery backup unit improves recovery times and secures valuable data for up to 72 hours in the event of a power outage or severe non-storage related hardware failure.HighPoint’s innovative RAID Recovery tool protects storage configurations bysecurely storing multiple copies of RAID meta-data, which administrators can utilize to quickly restore a failed or disabled RAID array.HighPoint DV Mode - Advanced Performance Technology Video professionals may find that even hardware RAID-based storage systems will experience inconsistent performance when capturing or editing high quality digital video, which can greatly impede or even cripple the post-production process. Theseinconsistencies are caused by standard RAID caching algorithms, which aredesigned for server environments rather than media applications.HighPoint has introduced DV Mode, aninnovative caching algorithm designedfor the video production applications. DV Mode reorganizes I/O in order to minimize the latency time of write-back caching workflow. This innovative new technology maintains consistent, sustained high-performance data transfer – a key component of any storage system dedicated to post production applications. Comprehensive RAID & Storage Management Interface The streamlined web-based user interface simplifies the storage configuration process and allowscustomers to quickly asses totalavailable capacity, the status of individual hard drives or SSD’s, and the health of RAID and JBOD configurations. Optional auto rebuild and hot sparefeatures add additional layers of datasecurity to redundant RAID 5 and 6configurations.• Hardware RAID 0, 1, 5, 6, 10, 50 & JBOD • Superior Reliability • DV Mode Technology • True Host-to-Target SAS 6Gb/s Connectivity • Support Windows, Linux, and macOS Operating Systems • Thunderbolt™ Aware • Bootable RAID Array Support • Supports OCE / ORLM • 4Kn Drive Compatible RocketRAID 4500 SeriesHighPoint 6Gb/s SAS/SATA Hardware RAID HBA’s for PC & Mac Platforms Industry’s Most Affordable 6Gb/s SAS/SATA Hardware RAID HBA’sHPTBBU-05Backup Units grant additional layers of data protection in the case of critical system faults andhardware failures.EXT-MS-1MMS (for RocketRAID 4522SGL)supports a data bandwidth up to 4x 6Gb/s between the RocketRAID 4522SGL RAID controllerinstalled in the host system, and the drive enclosure via SFF-8088 ports. Each cable can connectup to 4x Hard Drives or SSDs.INT-MS-1M4SC (for RocketRAID 4520SGL) -(SFF-8087) to 4x SATA device cable designed for use with HighPoint RocketRAID SAS/SATAcontrollers, and has been tested with a wide range of Enterprise and Pro-NAS class SAS/SATAhard drives and SSD's up to 16TB in capacity.RocketStor 6414SRocketRAID 4522 to house up to 4x 2.5" or 3.5" Hard Drives or SSDs. Two RocketStor 6414S canbe used with each RocketRAID 4522SGL HBA.RocketStor 6418SRocketRAID 4522SGL to house up to 8x 2.5" or 3.5" Hard Drives or SSDs.Phone 1-408-942-5800 Phone + 86(10)-53519056 (Ext. 8003)Fax 1-408-942-5801 Fax + 86-10-6897-5074E-mail ************************E-mail ************************Website Website Address 41650 Christy St. Fremont Address ROOM 512, Building 1,CA, 94538 No 4 JinHang Xi Rd, ShunYi DistrictBeijing, 101318, China。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
南京瑞博特电气有限公司Smart SAS变电站自动化监控系统用户手册2011.06Commit Authorized NameSignDate版权和所有权声明南京瑞博特电气有限公司对本说明书持有版权并保留一切权利。
未经许可，任何人不得以摘录、复印、剪南京瑞博特电气有限公司切等手段复制本功能概述书中的文字、图表、数据的部分和全部。
否则，本公司将在适当情况下追究相应责任。
商标声明南京瑞博特电气有限公司的注册商标。
本功能概述书中涉及的其他所有品牌和产品名称均为相关公司的商南京瑞博特电气有限公司标或注册商标。
目录1 前言 (5)2 系统简介 (6)2.1 系统的应用范围 (6)2.2 系统运行环境要求 (6)2.3 Smart SAS变电站自动化监控系统主要功能 (6)3 需要掌握的基本知识 (7)3.1 所应掌握的计算机类知识 (7)3.2 所应掌握的监控知识 (7)4 Smart SAS变电站自动化监控系统工作原理 (8)4.1 Smart SAS变电站自动化监控系统技术特点 (8)4.2 软件组成 (8)4.3 系统安装 (8)4.4 系统的目录结构 (9)4.5 系统启动 (9)4.5.1 数据服务启动RDSrv (10)4.5.2 人机界面启动RDHmi (11)4.6 系统关闭 (11)4.6.1 数据服务关闭RDSrv (11)4.6.2 人机界面关闭RDHmi (11)5 人机交互界面操作 (12)5.1 启动运行人机界面 (12)5.2 画面简介 (12)5.2.1 主页面简介 (12)5.2.2 子页面简介 (13)5.3 基本功能操作 (13)5.3.1 查看系统工况图 (13)5.3.2 查询历史事项 (14)5.3.3 查询操作日志 (14)5.3.4 查询历史曲线 (15)5.3.5 查询历史数据报表 (16)5.4 保护装置测点查看功能操作 (17)5.5 遥控功能操作 (19)6 系统数据测点维护 (21)6.1 软件运行 (21)6.2 界面布局介绍 (21)6.2.1 版面整体说明 (21)6.2.2 版面局部说明 (22)6.3 创建工程示例 (25)6.3.1 新建工程 (25)6.3.2 工程视图区配置 (26)6.3.3 IED视图区配置 (28)6.3.4 虚拟设备视图区配置 (34)6.3.5 数据库中创建及保存工程 (35)7 系统画面图形组态 (38)7.1 软件运行 (38)7.2 界面布局及工具说明 (38)7.2.1 版面布局 (38)7.2.2 工具条图标说明 (39)7.3 图形绘制 (39)7.4 图形属性的编辑 (40)7.4.1 模拟量测点编辑 (41)7.4.2 开关量测点编辑 (43)7.4.3 遥控按钮的编辑 (44)7.4.4 常用按钮及系统信息介绍 (45)8 问题解答 (48)1 前言本软件使用手册是根据Smart SAS变电站自动化监控系统2.5编写的，主要介绍了Smart SAS变电站自动化监控系统的使用方法、系统安装说明、日常运行中出现的问题及其解决办法，由于软件在不断的升级中，每一个新版本的推出，公司都会通过版本说明的方式对此手册进行补充。
2 系统简介2.1 系统的应用范围Smart SAS变电站自动化监控系统，可为变电站、发电厂、梯级电厂流域控制中心，以及网、省、地调，或大型工矿企业的集控中心提供智能化的监控，如调度自动化系统、配电监控管理系统等；也可用于一般工矿类的自动化监控，如污水处理自动控制系统等。
2.2 系统运行环境要求Smart SAS变电站自动化监控系统是一个跨平台的软件，能在Intel、Mac等硬件平台上运行，支持Windows、Linux操作系统，数据库采用MySQL。
2.3 Smart SAS变电站自动化监控系统主要功能采集各厂站子站系统设备的运行状态、通讯状态、运行参数等信息。
能处理AI、DI、AO、DO、PI、EVENT、VI等类型的数据，把接收的到的数据进行工程变换，能进行两级限值检查，监测量越限会发生报警，各种处理后的数据存入MYSQL数据库中，供不同的应用程序调用对各种类型的事件、告警信号、操作日志等信息分类保存于MYSQL数据库中，并依各种条件进行查询检索。
可友好地直观地监视各厂站及子站一二次系统接线图、各类曲线图、棒形图，能输出Excel格式的报表。
具有强大、便捷的图形参数维护功能，使得界面表现方式更丰富直观，实时、历史、工程数据库管理更简易。
告警信息管理功能，可实现分层、分类、分级告警，以便用户或工程服务人员快速定位告警事件。
事故追忆功能，可记录事故前、事故发生和事故后三个阶段的系统运行状态，通过各AI\DI量的数值再现，使用户或工程服务人员更易分析查找故障发生的原因。
用户权限日志管理功能，能依用户需求进行权限设置，针对地区可设置用户组及访问权限，针对人员可限定所能操作厂站的保护设备、针对系统设备可限定有权使用的人员，对每一个用户的操作进行记录并生成日志，以便查询。
系统运行环境监测功能，能监测系统节点的在线、离线，进程的运行状态、厂站设备的CPU负荷率、内存容量占用及空间使用情况等。
对时功能，具备IRIGB、NTP、规约等对时功能。
Smart SAS变电站自动化监控系统具有组态化、模块化、标准化的特点。
各功能模块具有相对独立性、界面友好、使用方便。
Smart SAS变电站自动化监控系统具有很强的通用性，既能运行在单机情况下，满足小规模应用的需要，又能通过网络组成多机系统，满足较大规模的应用需要。
3 需要掌握的基本知识在使用Smart SAS变电站自动化监控系统时，用户或工程服务人员必须掌握一些基础知识，如：计算机的基本操作、通信常识以及保护设备等，在本说明书中不再对一些基本的知识进行阐述。
3.1 所应掌握的计算机类知识计算机的组成、显示器、键盘、鼠标，打印机、音箱及其连接；计算机开机关机、登录、退出等；鼠标的单击、双击、拖动及右键的使用；Windows或Linux的使用，如：开始菜单、我的电脑、输入法、任务栏等功能的使用；Windows或Linux的界面风格及其使用风格；MySQL数据库的简单使用；网络的连接及其状态查看。
3.2 所应掌握的监控知识监控系统的模拟量、状态量或者说AI、DI、AO、DO测点的含义；监控系统的原理；监控系统一般组成。
4 Smart SAS工作原理4.1 Smart SAS变电站自动化监控系统技术特点Smart SAS变电站自动化监控系统是一套基于跨硬件平台和软件平台的系统，能运行于各类硬件平台和软件平台。
Smart SAS系统采用面向对象、模块化的设计思想。
系统内的各功能、任务模块和数据库可以分布到不同的计算机节点上。
遵循国际开放性系统的标准。
软件采用C++和QT编程语言，网络协议采用TCP/IP通信协议。
主站与子站公用实时数据库，历史数据、管理数据入商用库MYSQL，实时库与商用库有机结合。
满足故障信息快速响应、信息安全管理和信息一致性的需要。
支持一体前置机模式、单前置机模式、主备前置机模式和分布式前置机模式，适应了不同应用的要求。
支持IEC61850、IEC60870-5-104、IEC60870-5-103、IEC60870-5-101、DNP3.0、Modbus、Courier、SEL、GB60870-5-103及南瑞103等通信标准。
支持多国语言显示界面（如中、英、法、西班牙、日、俄文等）4.2 软件组成Smart SAS变电站自动化监控系统包括：进行系统组态的软件和在线实时运行的软件两大部分，系统组态软件具有画面图形组态工具(RDDraw.exe)、数据测点维护工具(RDCfg.exe)等，在线实时运行环境包括数据服务(RDSrv.exe)和人机界面(RDHmi.exe)。
4.3 系统安装Smart SAS提供一套安装光盘，用户通过友好的UI访问可以实现一键安装。
具体步骤如下：步骤一：将指定的安装光盘插入到电脑光驱中，并在相应的目录中找到Smart SAS安装文件，执行此文件即可安装Smart SAS程序。
步骤二：运行应用程序，系进入欢迎向导页（如下图4-1所示），提供相关信息，继续请按下一步图 4 - 1步骤三：运行应用程序进入选择安装路径向导页，同时也提供浏览供用户自由选择安装目录，确认后按安装进行软件实体安装（如图4-2所示），点击下一步完成安装。
图 4 - 2注：因Smart SAS使用MYSQL数据库，其安装方法可参考MYSQL数据库软件的安装手册。
4.4 系统的目录结构Smart SAS管理软件分布在以下几个目录中(如果我们把D盘作为根目录)：D:\ Smart SAS 系统安装时选定的目录(可手动修改)D:\ Smart SAS \bin 系统软件运行文件目录，包括运行文件和支持动态库D:\ Smart SAS \bin\RdCfg.exe 系统数据测点维护工具,配置工程数据库文件D:\ Smart SAS \bin\RdDraw.exe 系统画面图形组态工具D:\ Smart SAS \bin\RdSrv.exe 数据服务服务程序D:\ Smart SAS \bin\RdHmi.exe 人机交互界面程序D:\ Smart SAS \bin\ini\ 存放系统数据定义文件D:\ Smart SAS \dat 系统数据库定义文件，存放系统组态后的数据文件D:\ Smart SAS \ graph 系统画面图形组态后文件D:\ Smart SAS \images 系统运行需要的一些图片文件D:\ Smart SAS \table 报表存放文件D:\ Smart SAS \sg 画面图形组态工具中常用的电力元件图元或用户自定义文件4.5 系统启动系统启动时需要配置好运行环境，需要配置的运行环境包括：操作系统环境，如Windows；数据库环境，MySQL；Smart SAS系统定义环境，在D:\ Smart SAS \bin\ini\systemdef.ini文件中定义，如图4-3图 4 - 3如果不对文件systemdef.ini进行配置，系统将有可能不能正常工作，具体定义如下：[system]中可定义：●软件名称●登录时对话框●系统启用时间●Smart SAS系统数据库工程文件路径[config]中定义：●全数据召唤周期，单位秒s[Graphstyle]中定义：●界面风格\登录画面背景●登录所进入的首页画面●刷屏周期[DataBase]中定义：●是否使用本地的mysql数据库[RDHmi]中定义：●Hmi中实时事件框及历史事件的背景颜色注意：除[system]中用户可定义的如：公司名称、简称、软件名称、启用日期之外，其它项不建议用户自行改动，否则可能引起系统软件不工作，或功能无作用。