70246-3421;中文规格书,Datasheet资料
ASP-134602-01;中文规格书,Datasheet资料
ITEM NO. 1 2 3
PART NUMBER SEAM-40-02.0-10-A NEW-SUB-T-1M36-02.0-S-2 K-DOT-.404-.500-.005
QUANTITY 1.0000 400.00 1.0000 1.0000
MATERIAL LCP UL 94 V0, COLOR: BLACK COPPER ALLOY / LEAD FREE SOLDER POLYIMIDE FILM CONDUCTIVE POLYMER
.060 1.52 REF
.044 1.12 REF
BY SIGNING THIS DOCUMENT YOU ARE ACCEPTING THE CONDITIONS SET WITHIN. YOUR REQUIREMENTS MUST BE LISTED WITHIN THIS DRAWING. WHERE NO DIRECTION FROM THE CUSTOMER IS IDENTIFIED SAMTEC'S PROCESS REQUIREMENTS WILL BE USED.
C1
2
1
.011 0.28 REF .009 [.23]
C7
.123 3.12 REF
2.196 55.78 REF
.002±.003 0.05±0.08 (SEE NOTE 5 & 6)
40
C2
1.9500 49.530 .0500 1.270 .404 10.25 (TYP)
"C"
01 A B C D E F G H J K
01
2.835 72.00 REF
4
40 "D" "D"
博格纳电子器件公司产品说明书
212OS∙2x12 traditional size∙Baltic Birch∙Open back∙Top handle∙Celestion 2xV30 > 120w > 8 ΩOptions∙2x Celestion V30 > 120w > 16 Ω∙2x Celestion G12H > 60w > 8/16 ΩDIMENSIONS and WEIGHTS: Are subject to change anytime, Please measure your amp carefully if a Custom Case is being made. Add ¾ inch for each, handle and rubber feet.19.75” height27.25" width 10.37" depth 52 pounds212C∙2x12 over size∙Baltic Birch∙Glued in angled baffle∙Closed back∙Top handle∙Side handles∙Celestion 2xV30 > 120w > 8 ΩOptions∙Open panels 212O∙2x Celestion V30 > 120w > 16 Ω∙Celestion V30+G12H > 60w > 8/16 Ω∙Celestion V30+CL80 > 120w > 8 Ω∙Celestion V30+G12T75 > 120w > 8 Ω∙2x Celestion GB25 > 50W > 8 Ω∙Celestion GB25+G12H > 50W > 8 ΩDIMENSIONS and WEIGHTS: Are subject to change anytime, Please measure your amp carefully if a Custom Case is being made. Add ¾ inch for each, handle and rubber feet.24.25" height 29.75" width 11.87" depth 70 pounds212GFO∙2x12 Goldfinger∙Tall square design∙Speakers diagonal mounted∙Baltic Birch∙Open back∙Top handle∙Celestion G12H+GB25 > 50w > 8 ΩOptions∙Closed back 212GFCDIMENSIONS and WEIGHTS: Are subject to change anytime, Please measure your amp carefully if a Custom Case is being made. Add ¾ inch for each, handle and rubber feet.24.37” height25.62" width 10.25" depth 54 pounds212CB∙2x12 low profile stack cabinet∙Baltic Birch∙Glued in baffle∙Closed back∙Side handles∙Celestion 2xV30 > 120w > 8 ΩOptions∙Vertical standup version∙Front loaded∙2x Celestion V30 > 120w > 16 Ω∙Celestion V30+CL80 > 120w > 8 Ω∙Celestion V30+G12T75 > 120w > 8 Ω∙Celestion 2xGB25 > 50W > 8 ΩDIMENSIONS and WEIGHTS: Are subject to change anytime, Please measure your amp carefully if a Custom Case is being made. Add ¾ inch for each, handle and rubber feet.17" height 29.50" width 14" depth 51 pounds。
Parker Hannifin 247 Series 产品说明书
Bulletin HY25-2247-M1/US Parts List 247 SeriesEffective: June 15, 2008Bulletin HY25-2247-M1/USPower T ake-Off 247 SeriesParker Hannifin Corporation Chelsea Products Division Olive Branch, MS 38654 USAThe items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the "Offer of Sale".Offer of Sale© Copyright 2008, Parker Hannifin Corporation, All Rights ReservedIIParker Hannifin CorporationBulletin HY25-2247-M1/USPower T ake-Off 247 SeriesChelsea Products Division Olive Branch, MS 38654 USAContentsIIIExploded View .........................................................................................................................1Bill of Materials .....................................................................................................................2-3Valve Cap Sub Assembly ........................................................................................................4Mounting Bolts, CGP-P11 Pumps ...........................................................................................5Wiring Installation Kit without Electronic Overspeed Control Bill of Materials .........................6Hydraulic Installation Kit with Electronic Overspeed Control ..................................................7Wiring Installation with Electronic Overspeed Control .............................................................8P .T.O. Housing Dimensions ......................................................................................................9Pump Flange and Shaft Dimensions ................................................................................10-11Model Number Designation ...................................................................................................12Offer of Sale .. (16)Bulletin HY25-2247-M1/USPower T ake-Off 247 SeriesParker Hannifin Corporation Chelsea Products Division Olive Branch, MS 38654 USA316242775113752730212110663727555275514177337247457698382Exploded View 1Exploded AssemblyExploded Clutch Pack Sub-Assembly4142504454535251494746453938403938XP Output Shown562348Parker Hannifin Corporation Bulletin HY25-2247-M1/USPower T ake-Off 247 SeriesChelsea Products Division Olive Branch, MS 38654 USABill of Materials2Item Part Number Description Quantity1 1-P-625 Housing .....................................................................................................................1 2 378452-7 Set Screw - SH - .250-20 ..........................................................................................2 3 33-P-75 Gear-Idler ..................................................................................................................1 4 5-P-1387 Gear-Input .................................................................................................................1 6 9-P-98 Shaft-Idler .................................................................................................................2 10 4-P-179 Spacer-Idler Shaft .. (1)11 14-P-78 Spacer-Input Shaft ....................................................................................................1 13 500897-7 Cap-Shipping ............................................................................................................1 14 329602X Assembly-Valve Cap (see page 4) ............................................................................1 17 22-P-103 Gasket-Bearing Cap .................................................................................................1 21 28-P-286 Oil Seal (Output Side) ...............................................................................................1 22 500007-29 Key-Woodruff (XD OutPut Only) ...............................................................................1 23 28-P-171 O-Ring- .644" x .087" (With E.O.C. Only) ..................................................................1 24 28-P-71 O-Ring- .674" x .103" ................................................................................................2 27 31-P-117 Washer-Thrust- .879" x 1.44" x .123" ........................................................................3 30 68-P-2 Plate-Name ...............................................................................................................1 31 378422 Screw-Drive...............................................................................................................2 37 329364-1X Assembly-Drive Shaft & Clutch (3-P-952) (“XD” Output) ..........................................1 or 329364-2X Assembly-Drive Shaft & Clutch (3-P-953) (“XP” Output) .......................................1 or 329364-3X Assembly-Drive Shaft & Clutch (3-P-954) (“AD” Output) .......................................1 or 329364-4X Assembly-Drive Shaft & Clutch (3-P-955) (“XE” Output) .......................................1 38 378890 Reataining Ring .. (2)39 31-P-110 Thrust Washer ...........................................................................................................2 40 561013 Needle Bearing, Output Gear ...................................................................................1 41 2-P-820 Output Gear ..............................................................................................................1 42 31-P-111 Thrust Washer ...........................................................................................................1 43 379914 Output Gear Bell .......................................................................................................1 44 3-P-952 Output Shaft (“XD”), (1-1/4" Round)..........................................................................1 or 3-P-953 Output Shaft (“XP”), (7/8"-13 Tooth Spline) ...............................................................1 or 3-P-954 Output Shaft (“AD”), (3/4"-11 Tooth Spline) ...............................................................1 or 3-P-955 Output Shaft (“XE”), (5/8"-9 Tooth Spline) .................................................................1 45 28-P-266 O-Ring (-022) ............................................................................................................2 46 2-P-819 Clutch Gear ...............................................................................................................1 47 31-P-108 Thrust Washer ...........................................................................................................1 48 379691 Friction Disk ..............................................................................................................6 49 379692 Seperator Plate .........................................................................................................5 50 37-P-56 Clutch Spring ............................................................................................................1 51 379913 Clutch Piston .............................................................................................................1 52 28-P-265 Lip Seal, Clutch .........................................................................................................1 53 379705 Clutch Cylinder ..........................................................................................................1 54 379694 Reataining Ring .. (1)55 379431-6 Capscrew-SH- .250"-20 X 1.00"................................................................................3 56 379242 Adapter-Straight-.125"-27 x .750"-16 (Without E.O.C.) (with qty 1 of item #69) .......1 57379243Sensor-Speed (With E.O.C. Only) (1)Bulletin HY25-2247-M1/USPower T ake-Off 247 SeriesParker Hannifin Corporation Chelsea Products Division Olive Branch, MS 38654 USABill of Materials3Item Part Number DescriptionQuantity69 379231 Plug-Pipe-.125"-27 (Qty. of only 1 with E.O.C. option) ..............................................2 73 561005 Bearing-Ball-.9992" x 2.0472" x .5900" .....................................................................1 74 561015 Bearing-Ball-1.2598" x 2.2835" x .5118" ...................................................................1 75 561014 Bearing-Needle Roller Assembly-.875" x 1.125" x 1.000" ........................................3 82 379486 Elbow-90°-.438"-20 ................................................................................................... 83 379564-2 Cap-Shipping ............................................................................................................Loose Parts379688 Lubricant-Spline ........................................................................................................1 8000-19X Stud Kit28-P-200 O-Ring ...................................................................................................................1 379697 Dowel, Split Hollow ................................................................................................2 379706 Hex Capscrew, (M10-1.5" x 1.18") ........................................................................3 379578-56 Hex Capscrew, (M10-1.5" x 150mm) .....................................................................1 379428-22 Stud, (M10 x 1.50" x .375"-24 x 2.250") ................................................................2 379744 Flang Nut, (.375"-24) (2)Service Kits329376-1X Kit-Gasket & Seal 329376-2X Kit-Bearing329376-3X Kit-Clutch Repair329376-4X Kit-Complete Rebuild (Includes 329376-1X, -2X, -3X)8611-023-Q1NKit-Soft Goods-PGP-511Parker Hannifin Corporation Bulletin HY25-2247-M1/USPower T ake-Off 247 SeriesChelsea Products Division Olive Branch, MS 38654 USAValve Cap Sub Assembly4Exploded Valve Cap Sub AssemblyItem Part Number DescriptionQuantity14 329602X Assembly-Valve Cap 1 14a 21-P-711 Valve Cap1 14b 28-P-119 Oil Seal (High Press) 1 14c 378811 Washer1 14d 378849 Retaining Ring1 14e 380012 Plug - O-Ring (.438" - 20) 1 14f 378447-6 Socket Head Capscrew 1 14g 380011-12 Hydraulic Valve 12V114h379484Hold Down Clamp (included with Hyd. Valve)114f14h14g14a14e14b14c14dBulletin HY25-2247-M1/USPower T ake-Off 247 SeriesParker Hannifin CorporationChelsea Products Division Olive Branch, MS 38654 USAInstallation Kit Bill of Material5Item Part Number DescriptionQuantity90Pump Mounting Bolts2378431-30 Capscrew-HH - .375"-16 x 4.00" (“016” Series pump) 378431-31 Capscrew-HH - .375"-16 x 4.25" (“026” Series pump)378431-32 Capscrew-HH - .375"-16 x 4.50" (“032” & “037” Series pump) 378431-33 Capscrew-HH - .375"-16 x 4.75" (“042” Series pump) 378431-34 Capscrew-HH - .375"-16 x 5.00" (“055” Series pump) 378431-34 Capscrew-HH - .375"-16 x 5.00" (“061” Series pump) 378431-35 Capscrew-HH - .375"-16 x 5.25" (“071” Series pump) 378431-36 Capscrew-HH - .375"-16 x 5.50" (“082” Series pump)91500365-26Washer- Flat- .375 (Qty. 4 w/ “042” & “055” Series pump)2 or 4Included in CGP-P11 Pump Mounting Kits91909091Parker Hannifin Corporation Bulletin HY25-2247-M1/USPower T ake-Off 247 SeriesChelsea Products Division Olive Branch, MS 38654 USAInstallation Kit Bill of Material6Item Part Number DescriptionQuantityWiring Installation Sketch without E.O.C. (SK-448 Rev A)329600X KIT -Installation & Mounting - Non E.O.C. 1 329598X Wiring Harness 1 379502 Pressure Switch1 379698 Elbow-male 90° - .438" -24 x .125" -27 1 379817 Grommet1 328232-1X Assembly Hose 18000-19XKit- Mounting1BA654 231Firewall Pass-Thru InstallationSlice Grommet, Insert In Hole In Clutch Master Cylinder Seal Assembly329598X379625 90° Elbow379502 Pressure Switch Torque Bolt To 120-140 In. Lbs.329232-1XHose Assembly379817 GrommetCut 1.25" Dia. Hole In Firewall Near Ford Clutch Master Cylinder Seal Assembly379698 90° ElbowTo Torqshift Trans. High Pressure PortBulletin HY25-2247-M1/USPower T ake-Off 247 SeriesParker Hannifin Corporation Chelsea Products Division Olive Branch, MS 38654 USABill of Materials7Item Part Number DescriptionQuantity329255-12X Assembly-Speed Limiter (12V) 1 379244 Mounting Bracket 1 379243 P .T.O. Speed Sensor1 328923-10X Speed Sensor Extension Cable, 10 Ft. (Supplied w/E.O.C.) 1 329601X KIT -Installation & Mounting - E.O.C. 1 329599X Wiring-Harness-EOC 1 379502 Switch-Pressure1 379698 Elbow-male 90° - .438"-24 x .125" -27 1 379817 Grommet1 328232-1X Assembly-Hose 1 8000-19X Kit- Mounting1328923-5XSpeed Sensor Extension Cable, 5 Ft. (Optional)Hydraulic Installation Kit with Electronic Overspeed ControlParker Hannifin Corporation Bulletin HY25-2247-M1/USPower T ake-Off 247 SeriesChelsea Products Division Olive Branch, MS 38654 USAInstallation Drawing8Wiring Installation Sketch with E.O.C. (SK-449 Rev A)329255-12X - 12 V o l t S p e e d L i m i t e r K i t e 329601X - E .O .C . I n s t a l l a t i o n K i t 329603X - E .O .C . K i tG r o u n d t o C a bA c c e p t s 1/4" s c r e w23/8" S t u d S i z e R i n g T e r m i n a lR e dB l a c kW h i t e w /L t . B l u e S t r i p e F u s e H o l d e r w /9 A m p F u s eB l u eG r e e n329255-12X (12V )S p e e d L i m i t C o n t r o l B o x379244 M o u n t i n g B r a c k e t37924328-P -171500376-6500357-7500448-9S e e W i r i n g C h a r tL i g h t B l u e w /Y e l l o w S t r i p eR u n C a b l e t h r o u g h G r o m m e t i n F i r e w a l l S p e e d S e n s o r E x t e n s i o n C a b l e 328923-10X (10 F T . S u p p l i e d w /E .O .C .)328923-5x (5 F T . O p t i o n a l )T o 5R 110 T r a n s m i s s i o n s H i g h P r e s s u r e P o r t379698 90° E l b o w329232-1X H o s e A s s e m b l yR e l a y329599X W i r e H a r n e s s1 (R e d )4 (B l a c k )3 (Y e l l o w )(B l a c k ) C o n n e c t t o B l u e W i r e F r o m E .O .C .(W h i t e ) C o n n e c t t o G r e e n W i r e F r o m E .O .C .379817 G r o m m e tS l i c e G r o m m e t , I n s e r t I n H o l e I n C l u t c h M a s t e r C y l i n d e r S e a l A s s e m b l yC u t 1.25"D i a . H o l e I n F i r e w a l l N e a r F o r d C l u t c h M a s t e r C y l i n d e r S e a l A s s e m b l yBulletin HY25-2247-M1/USPower T ake-Off 247 SeriesParker Hannifin Corporation Chelsea Products Division Olive Branch, MS 38654 USA9Housing DimensionsParker Hannifin CorporationBulletin HY25-2247-M1/USPower T ake-Off 247 SeriesChelsea Products Division Olive Branch, MS 38654 USA10Output Flanges XD Output1.25" Keyed ShaftS.A.E. Class “A” 2 Bolt FlangeXP OutputAD Output3/4" 11 - Tooth ShaftS.A.E. Class “A” 2 Bolt Flange7/8" 13 - Tooth ShaftS.A.E. Class “A” 2 Bolt Flange1.380"1.249".656"1.210"Bulletin HY25-2247-M1/USPower T ake-Off 247 SeriesParker Hannifin Corporation Chelsea Products Division Olive Branch, MS 38654 USAOutput Flanges XE Output5/8" 9 - Tooth ShaftS.A.E. Class “A” 2 Bolt Flange11Parker Hannifin Corporation Bulletin HY25-2247-M1/USPower T ake-Off 247 SeriesChelsea Products Division Olive Branch, MS 38654 USAOUTPUT TYPEAD = 2 Bolt “A” .75" 11 - Tooth Spline XP = 2 Bolt “A” .875" 13 - Tooth Spline XD = 1.25" Dia. Keyed ShaftXE = 2 Bolt “A” 5/8" 9 - Tooth Spline16 = Hyd. Pump 2.9 G.P *************.P .M. 26 = Hyd. Pump 5.3 G.P *************.P .M. 32 = Hyd. Pump 5.8 G.P *************.P .M. 37 = Hyd. Pump 6.7 G.P *************.P .M. 42 = Hyd. Pump 7.8 G.P *************.P .M. 55 = Hyd. Pump 10.2 G.P *************.P .M. 61 = Hyd. Pump 11.1 G.P *************.P .M. 71 = Hyd. Pump 13.1 G.P *************.P .M. 82 = Hyd. Pump 15.1 G.P *************.P .M. 50 = Hyd. Pump 9.2 G.P *************.P .M. 66 = Hyd. Pump 12.2 G.P *************.P .M. 87 = Hyd. Pump 16.0 G.P *************.P .M. 10 = Hyd. Pump 18.5 G.P *************.P .M. 14 = Hyd. Pump 25.0 G.P *************.P .M. 18 = Hyd. Pump 28 G.P *************.P .M. 20 = Hyd. Pump 31 G.P *************.P .M.BASIC MODEL 247MOUNTING TYPEF = Special Mount Ford GEAR RATIOM = .75 (24/32/32)INPUT GEAR DESIGNATOR KS = 59 Teeth, Spur LUBRICATIONP = Pressure LubeSHIFTER TYPEB = 12V Hydraulic ValveASSEMBLY ARRANGEMENT2 = 4 x 2 Vehicles Available With All Output Options4 = 4 x 4 Vehicles Available With Special Direct Mount Pump Options. Pump Codes 16, 26, 37, 42, 55, 61, 71 & 82Model Number Designation247 F M KS P- B 2 XP1213NotesParker Hannifin Corporation Chelsea Products Division Olive Branch, MS 38654 USANotes14Parker Hannifin CorporationChelsea Products DivisionOlive Branch, MS 38654 USA15NotesParker Hannifin Corporation Chelsea Products Division Olive Branch, MS 38654 USAThe items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its autho-rized distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such items, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptance of this offer.discard or otherwise dispose of any special tooling or other property in its sole discretion at any time.8. Buyer’s Property: Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyer’s property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property, Seller shall not be responsible for any loss or damage to such property while it is in Seller’s possession or control.9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the items sold. Buyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If Buyer claims exemption from any sales, use or other tax imposed by any taxing authority, Buyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable.10. Indemnity For Infringement of Intellectual Property Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Part 10. Seller will defend and indemnify Buyer against allegations of infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress and trade secrets (hereinafter ‘Intellectual Property Rights’). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that an item sold pursuant to this contract infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using said item, replace or modify said item so as to make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to items delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, com-bination or use in a system of any item sold hereunder. The foregoing provisions of this Part 10 shall constitute Seller’s sole and exclusive liability and Buyer’s sole and exclusive remedy for infringement of Intel-lectual Property Rights.If a claim is based on information provided by Buyer or if the design for an item delivered hereunder is specified in whole or in part by Buyer, Buyer shall defend and indemnify Seller for all costs, expenses or judgments resulting from any claim that such item infringes any patent, trademark, copyright, trade dress, trade secret or any similar right.11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Seller’s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter ‘Events of Force Majeure’). Events of Force Majeure shall include without limitation, accidents, acts of God, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fires, floods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Seller’s control.12. Entire Agreement/Governing Law: The terms and conditions set forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire Agreement concerning the items sold, and there are no oral or other representations or agreements which pertain there/to. This Agreement shall be governed in all respects by the law of the State of Ohio. No actions arising out of the sale of the items sold hereunder or this Agreement may be brought by either party more than two (2) years after the cause of action accrues. 6/08-P1. Terms and Conditions of Sale: All descriptions, quotations, pro-posals, offers, acknowledgments, acceptances and sales of Seller’s products are subject to and shall be governed exclusively by the terms and conditions stated herein. Buyer’s acceptance of any offer to sell is limited to these terms and conditions. Any terms or conditions in addi-tion to, or inconsistent with those stated herein, proposed by Buyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between Buyer and Seller unless expressly accepted in writing by Seller. Seller’s acceptance of any offer to purchase by Buyer is expressly conditional upon Buyer’s assent to all the terms and condi-tions stated herein, including any terms in addition to, or inconsistent with those contained in Buyer’s offer, Acceptance of Seller’s products shall in all events constitute such assent.2. Payment: Payment shall be made by Buyer net 30 days from the date of delivery of the items purchased hereunder. Amounts not timely paid shall bear interest at the maximum rate permitted by law for each month or portion thereof that the Buyer is late in making payment. Any claims by Buyer for omissions or shortages in a shipment shall be waived un-less Seller receives notice thereof within 30 days after Buyer’s receipt of the shipment.3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made F .O.B. Seller’s plant. Regardless of the method of deliv-ery, however, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier. Any delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery.4. Warranty: Seller warrants that the items sold hereunder shall be free from defects in material or workmanship for a period of:(A) All Power T ake-Off units 18 months from date of sale.(B) Except 267, 269, 277, 278, 246, 247, 250, and 859 series two (2) years from date of installation. THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY, GUAR-ANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED. NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRAN-TIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT LIABILITY.6. Changes, Reschedules and Cancellations: Buyer may request to modify the designs or specifications for the items sold hereunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modification or cancellation shall become part of the contract between Buyer and Seller unless accepted by Seller in a written amendment to this Agreement. Acceptance of any such requested modification or cancellation shall be at Seller’s discretion, and shall be upon such terms and conditions as Seller may require.7. Special Tooling: A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Seller’s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter,Offer of Sale16Parker Hannifin CorporationChelsea Products Division Olive Branch, MS 38654 USA。
HT7024a规格书
Rev. 1.1012014-03-19• 低功耗• 低温度系数• 高输入电压范围 (高达 30V)• 静态电流：1µA • 输出电压精度：±2%• 内建迟滞电路• 封装类型：TO92, SOT89 和 SOT23-5应用领域• 电池检测器• 电平选择器• 电源故障检测器• 微计算机复位• 电池存储备份• 非易失性RAM 信号存储保护HT70xxA-3系列是一组采用CMOS 技术实现的三端低功耗电压检测器。
该系列中的电压检测器能检测固定的电压，范围从 2.2V 到 8.2V 。
电压检测器系列由高精度低功耗的标准电压源、比较器、迟滞电路以及输出驱动器组成。
采用 CMOS 技术制造，因而确保了低功率消耗。
尽管主要用作固定电压检测器，但这些 IC 可搭配外部元件用于指定的阈值电压的检测。
选型表注：“xx ” 代表检测电压。
deN沟道开漏输出（常开，低有效）输出表格和曲线图..d引脚图Rev. 1.1022014-03-19电源供应电压 .............................................................................................................................V SS-0.3V ~ V SS+33V 输出电压 ...................................................................................................................................V SS-0.3V ~ V DD+0.3V 输出电流 .............................................................................................................................................................50mA功耗 ..................................................................................................................................................................200mW 储存温度范围 ............................................................................................................................................................−50°C ~ 125°C 工作环境温度 ........................................................................................................................................−40°C ~ 85°C 注：这里只强调额定功率，超过极限参数所规定的范围将对芯片造成损害，无法预期芯片在上述标示范围外的工作状态，而且若长期在标示范围外的条件下工作，可能影响芯片的可靠性。
HPLC法同时测定盐酸氟哌噻吨原料药中5种已知杂质的含量
HPLC法同时测定盐酸氟哌噻吨原料药中9种已知杂质的含量庄波阳4*，楼永明2（4福建省食品药品认证审评中心，福建福州350001；2.福建省食品药品质量检验研究院，福建福州350001）摘要：目的建立HPLC法同时测定盐酸氟哌噻吨原料药中5种已知杂质（TFMTXAN、杂质F、杂质D、中间体”、中间体4）含量的方法。
方法色谱柱：Venuil XBP C9柱（4.0x39mm,5p m）；流动相：以磷酸盐缓冲液（取1.30g的磷酸二氢钾,0.14g十二烷基三甲基溴化铵，加水稀释至1400mL,用”mol-L_1氢氧化钠调节（pH7.0）为流动相A,甲醇为流动相B,乙腈为流动相C,进行梯度洗脱;检测波长：477nm；流速：40mL -mH-。
结果TFMTXAN、杂质F、杂质D、中间体”、中间体4的浓度分别在0.43〜4.34pg-mL-1、9.2074〜4.H pg-mL-1、.38〜5.50 p g-mL-\0.430〜4.04p g-mL一1、0.2536〜5.071p g-mL-范围内线性关系良好（鼻0.9992）；TFMTXAN、杂质F、杂质D、中间体”、中间体4的平均加样回收率分别为98.4%、99.0%、99.0%、97.5%、99.5%。
结论此法操作简便、灵敏、准确，重复性好，适用于盐酸氟哌噻吨中3个已知杂质含量的测定。
关键词：高效液相色谱法;盐酸氟哌噻吨；杂质中图分类号：R947文献标识码：A文章编号：306-5763（2020--14607464Determi nah o n of Five Related Substa n ces in Flupe n hxol Dihydrachloride byHPLCZHUANG Bo-qang1*丄OU Yong-ming2(Fujion food and Dreg Certification and Evaluation Centut,Fuzhou 369001,China；-Fujivn Institute For Food and Dreg Quality ContreOFuzhou350001,China)ABSTRACT：OBJECTIVE To estaklisP an HPLC methoh for detepnininy the coutexts of Five Relateh SuOstances in Flupeutixol DHyppcUloPOe-MEHTODS The detepninatiou was pePopneh on Vexusil XBP C5(4.6x150mm,9 pm)with the moUile phase A consisteh of Potassium PhosphVe MonohasK((pH=7.0),th e moUile phase B consisted of methanoi anh the moUile phase C consisted of acetonitrile at the Uow rate of40mL•min-1(hmkHnt elution),The detection wavelength：277nm.RESULTS The linear range of TFMTXAN,iHpuPtp F ,iHpuPtyD,inter-meXiate0Intermehiate7were0.015-0.86pg•mL"1^6.014-10.86pg•mL"1^6.273-3.09pg•mL_1^0.0360-72pg•mL_1^2.2936-9-071pg•mL"10-9992),psputi/ly.The average recavep rates of TFMTXAN, iHpupta F,HipuPtyD,Intepnehiate0IntermeXiate7were93-35%,99.02%,99.60%,99.29%,99.91%,pspec-tivelp-CONCLUSION This methoh is simple:sensitive:accurate:reppOucible:and spitaUle for the detepninatiou of five relateh suOstances in11106x11X01clinyppcyhpne-KEYWORDS:HPLC；Flupentixci di2yypcUlopdc:Relateh suOstavce盐酸氟哌噻吨，是常用的一类抗精神病药，在盐酸氟哌噻吨合成过程中5>91 ,TFMTXAN为合成原料，中间体（、中间体0为合成工艺中的中间产物，杂质D、杂质F为合成中产生的杂质，其杂质的化学结构（见表1）。
分项报价表
分项报价表采购编号：ZSZX2022HG026项目名称：揭阳市药品检验所2022年检验设备采购项目包号：1投标人名称：广东崇泰贸易有限公司货币及单位：人民币/元品目号序号货物名称规格型号品牌产地制造商名称单价数量总价1-11超高效液相色谱仪Vanquish Flex赛默飞美国赛默飞世尔科技（中国）有限公司658,600.001.00 (套)658,600.001-21自动电位滴定仪T5梅特勒瑞士梅特勒公司186,000.001.00 (套)186,000.001-31电子分析天平ML204T梅特勒上海梅特勒公司29,500.001.00 (台)29,500.001-41酸度计FE28梅特勒上海梅特勒公司4,900.002.00 (台)9,800.001-51生物显微镜Axioscope5蔡司江苏蔡司科技（苏州）有限公司342,000.001.00 (台)342,000.001-61通用型冷水机IC010深圳勒普特深圳深圳勒普仪器技术有限公司10,000.001(台)10,000.001-71全自动洗瓶器Q750D 语瓶天津天津语瓶仪器技术有限公司165,000.001(台)165,000.001-81全自动均质器AH-50睿科厦门睿科集团（厦门）股份有限公司196,600.001(台)196,600.001-91干热灭菌器BXH-280G上海博迅上海上海博迅医疗生物仪器股份有限公司21,500.001(台)21,500.001-101生化培养箱BPC-250F上海一恒上海上海一恒科学仪器有限公司17,500.001(台)17,500.001-111霉菌培养箱LRH-250-MSE 广东泰宏君广东广东泰宏君科学仪器股份有限公司11,800.001(台)11,800.00广东政府采购智慧云平台ZS ZX 2022HG026 第(1) 采购包2022-04-02 12:20:23广东崇泰贸易有限公司2022-04-0212:20:23投标人盖章：日期：2022 年 04 月 02 日广东政府采购智慧云平台 Z S Z X 2022H G 026 第 (1) 采购包2022-04-02 12:20:23广东崇泰贸易有限公司 2022-04-02 12:20:23。
Belimo B351 铬球阀 Technical Data Sheet说明书
B351•Stainless Steel Ball and StemType overviewType DN B35150Technical dataFunctional dataValve size [mm]2" [50]Fluidchilled or hot water, up to 60% glycol Fluid Temp Range (water)0...250°F [-18...120°C]Body Pressure Rating 400 psi Close-off pressure ∆ps 200 psiFlow characteristic A-port equal percentage, B-port modified for constant common port flow Servicing maintenance-free Flow Pattern 3-way Mixing/Diverting Leakage rate0% for A – AB, <2.0% for B – AB Controllable flow range 75°Cv68Cv Flow RatingA-port: as stated in chart B-port: 70% of A – AB CvMaterials Valve body Nickel-plated brass body Spindle stainless steel Spindle seal EPDM (lubricated)SeatPTFE Characterized disc TEFZEL®Pipe connection NPT female ends O-ring EPDM (lubricated)Ballstainless steel Suitable actuators Non-Spring ARB(X)SpringAFSafety notesWARNING: This product can expose you to lead which is known to the State of California to cause cancer and reproductive harm. For more information go to B351ApplicationMode of operationProduct featuresThis valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some other common applications include Unit Ventilators, VAV box re-heat coils and bypass loops. This valve is suitable for use in a hydronic system with variable or constant flow.Flow/Mounting detailsProduct featuresLocal Control SY2~12, 110vac ModDimensionsType DN B35150ARB, ARXAB C D E F H110.5" [267]4.9" [125]7.7" [196]6.0" [152]1.7" [44]2.6" [66]0.8" [20]ARB N4, ARX N4AB C D E F 11.4" [289]4.9" [125]9.8" [249]8.0" [203]3.1" [80]3.1" [80]ARQB, ARQXB351A B C D E F H1H29.9" [251] 4.9" [125]8.3" [211] 6.6" [168] 2.3" [58] 2.6" [66]0.8" [20]0.6" [15]AFRB, AFRXA B C D E F11.3" [286] 4.9" [125]8.3" [211] 6.6" [168] 2.6" [66] 2.6" [66]AFRB N4, AFRX N4A B C D E F13.0" [330] 4.9" [125]11.8" [300]9.9" [251] 3.7" [95] 3.7" [95]AFRX24FootnotesOn/Off, Spring Return, Fail-Safe, AC/DC 24 VTechnical dataElectrical dataNominal voltageAC/DC 24 V Nominal voltage frequency 50/60 Hz Power consumption in operation 5 W Power consumption in rest position 2.5 WTransformer sizing 7.5 VA (class 2 power source)Electrical Connection18 GA appliance or plenum cables, 3 ft [1 m], 10 ft [3 m] or 16ft [5 m], with or without 1/2" conduit connectorOverload Protectionelectronic throughout 0...95° rotation Functional dataDirection of motion motor selectable by ccw/cw mounting Direction of motion fail-safe reversible with cw/ccw mounting Manual override 5 mm hex crank (3/16" Allen), supplied Angle of rotation 90°Running Time (Motor)75 s / 90°Running time fail-safe <20 s @ 20°C Noise level, motor 45 dB(A)Noise level, fail-safe 62 dB(A)Position indicationMechanical Safety dataDegree of protection IEC/EN IP54Degree of protection NEMA/UL NEMA 2Enclosure UL Enclosure Type 2Agency ListingcULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2014/30/EU and2014/35/EU; Listed to UL 2043 - suitable for use in air plenums per Section 300.22(c) of the NEC and Section 602.2 of the IMC Quality Standard ISO 9001Ambient temperature -22...122°F [-30...50°C]Storage temperature -40...176°F [-40...80°C]Ambient humidity Max. 95% RH, non-condensing Servicingmaintenance-freeMaterialsHousing material Galvanized steel and plastic housing†Rated Impulse Voltage 800V, Type of action 1.AA, Control Pollution Degree 3Electrical installationINSTALLATION NOTESActuators with appliance cables are numbered.Provide overload protection and disconnect as required.AFRX24Actuators may also be powered by DC 24 V.Actuators may be powered in parallel. Power consumption must be observed.Parallel wiring required for piggy-back applications.Meets cULus requirements without the need of an electrical ground connection.During installation, testing, servicing and troubleshooting of this product, it may be necessaryto work with live electrical components. Have a qualified licensed electrician or other individualwho has been properly trained in handling live electrical components perform these tasks.Failure to follow all electrical safety precautions when exposed to live electrical componentscould result in death or serious injury.Wiring diagramsOn/Off。
742863160;中文规格书,Datasheet资料
3.1 3.0 2.02012-06-272012-03-292009-08-13SStSStSMuSStSMu-Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:Test Equipment: E4991A or equivalentF Derating Curve:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-CBF HFof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the ferrite body and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the ferrite body and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the plating. The washing varnish agent could have a negative effect on the long term function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the ferrite body could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-ned.• Wave soldering is only allowed after evaluation and approval.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 742863160。