NT90TPHCEDC18VCF0.6中文资料
Lumoxiti (moxetumomab pasudotox-tdfk) 产品说明书
Lumoxiti™ (moxetumomab pasudotox-tdfk)(Intravenous)Document Number: IC-0393 Last Review Date: 10/02/2018Date of Origin: 10/02/2018Dates Reviewed: 10/2018I.Length of AuthorizationCoverage is provided for six months (6 cycles) and may not be renewed.II.Dosing LimitsA.Quantity Limit (max daily dose) [Pharmacy Benefit]:-Lumoxiti 1 mg SDV: 15 vials per 28 day cycleB.Max Units (per dose and over time) [Medical Benefit]:∙ 5 mg on days 1, 3 and 5 of a 28-day cycleIII.Initial Approval CriteriaCoverage is provided in the following conditions:∙Patient is at least 18 years or older; AND∙Patient is pseudomonas-immunotoxin naïve (e.g., moxetumomab pasudotox, etc.); AND∙Patient does not have severe renal impairment defined as CrCl ≤ 29 mL/min; ANDHairy Cell Leukemia (HCL)†∙Patient has a confirmed diagnosis of Hairy Cell Leukemia or a HCL variant; AND∙Patient must has relapsed or refractory disease; AND∙Patient has previously failed at least TWO prior systemic therapies as one of the following: o Failure to two courses of purine analog therapy (e.g., cladribine, pentostatin, etc.); ORo Failure to at least one purine analog therapy AND one course of rituximab or a BRAF-inhibitor (e.g., vemurafenib, etc.)†FDA Approved Indication(s); ‡ Compendia recommended indication(s)IV.Renewal CriteriaCoverage cannot be renewed.V.Dosage/AdministrationVI.Billing Code/Availability InformationJcode:J9999: Not otherwise classified, antineoplastic drugsNDC:Lumoxiti 1 mg single-dose vial: 00310-4700-xxo IV solution stabilizer for use during administration: 00310-4715-xxVII.References1.Lumoxiti [package insert]. Wilmington, DE; Astra Zeneca Pharmaceuticals; September2018. Accessed September 2018.2.Referenced with permission from the NCCN Drugs & Biologics Compendium (NCCNCompendium®) for moxetumomab pasudotox. National Comprehensive Cancer Network,2018. The NCCN Compendium® is a derivative work of the NCCN Guidelines®. NATIONALCOMPREHENSIVE CANCER NETWORK®, NCCN®, and NCCN GUIDELINES® aretrademarks owned by the National Comprehensive Cancer Network, Inc.” To view the mostrecent and complete version of the Compendium, go online to . AccessedSeptember 2018.3.Kreitman RJ, Dearden C, Zingani PL, et al. Moxetumomab pasudotox inrelapsed/refractory hairy cell leukemia. Leukemia. 2018; 32(8): 1768–1777.4.Robbins BA, Ellison DJ, Spinosa JC, et al. Diagnostic application of two-color flowcytometry in 161 cases of hairy cell leukemia. Blood 1993;82:1277-1287.Appendix 1 – Covered Diagnosis CodesAppendix 2 – Centers for Medicare and Medicaid Services (CMS)Medicare coverage for outpatient (Part B) drugs is outlined in the Medicare Benefit Policy Manual (Pub. 100-2), Chapter 15, §50 Drugs and Biologicals. In addition, National Coverage Determination (NCD) and Local Coverage Determinations (LCDs) may exist and compliance with these policies is required where applicable. They can be found at: /medicare-coverage-database/search/advanced-search.aspx. Additional indications may be covered at the discretion of the health plan.Medicare Part B Covered Diagnosis Codes (applicable to existing NCD/LCD): N/A。
迈信驱动华大电机选型手册
LB系列机座号（mm）：80、110、130、150额定转矩（Nm）：1.3～27额定功率（Kw）：0.4～5.5额定转速（rpm）：1500、2000、2500、3000最高转速（rpm）：/转子惯量：中惯量标配反馈元件：增量式编码器（2500C/T）失电制动器：可配适配驱动器工作电压（VAC）：220LBB系列机座号（mm）：80、110、130、150额定转矩（Nm）：1.3～19.1额定功率（Kw）：0.4～3.0额定转速（rpm）：1500、2000、3000最高转速（rpm）：3000、5000转子惯量：中惯量标配反馈元件：总线式光电编码器失电制动器：可配适配驱动器工作电压（VAC）：220HB系列机座号（mm）：110、130、150额定转矩（Nm）：2～27额定功率（Kw）：0.6～5.5额定转速（rpm）：1500、2000、2500、3000最高转速（rpm）：/转子惯量：中惯量标配反馈元件：增量式编码器（2500C/T）失电制动器：可配适配驱动器工作电压（VAC）：380HBB系列机座号（mm）：110、130、150额定转矩（Nm）：2.4～28.7额定功率（Kw）：0.4～5.5额定转速（rpm）：1500、2000最高转速（rpm）：3000转子惯量：中惯量标配反馈元件：总线式光电编码器失电制动器：可配适配驱动器工作电压（VAC）：380请您关注以下伺服电机为自冷式散热方式，安装时请选择足够大的安装板。
伺服电机长期工作，机体本身会有一定的温度，这是正常情况。
装配了失电制动器的伺服电机，其失电制动器的电源必须由驱动器控制开闭，否则会造成工作状态不佳。
伺服电机内装精密反馈元件，严禁重力敲击电机轴伸端及后部。
请注意电机轴伸端的最大径、轴向力的限值。
严禁随意更改、拆装及加工电机部件。
请您将需求告之我们，我们来为您服务。
电机电联接器转矩转速曲线示意图LB 、HB系列LBB 、HBB 系列LB 、LBB 、HB 、HBB 系列伺服电机的Mmax=3Mn ；Mmax 输出状态为短时工作。
NTE电子MSC系列62型号AC电解电容商品说明说明书
The MSC Series is a range of AC electrolytic capacitors. These capacitors are most often used to provide the torque necessary to start AC motors and in other intermit-tent AC applications.FEATURES:Two .250” Quick Connect terminalsRound moisture and oil resistant plastic case110VAC to 330VACQuick disconnect terminalsRecessed terminalsLong life and high reliabilityRATINGSCapacitance Range:110/125 Volts − 21F to 2160F165 Volts − 108F to 708F220/250 Volts − 21F to 850F330 Volts − 21F to 552F PERFORMANCE SPECIFICATIONSOperating Temperature Range: −40 to +65CPower Factor: 10% Max.; 12% 30FOperating Frequency: 47 − 60Hz MOUNTINGVertical mounting of the capacitor with the terminals up is recommended. However, horizontal mounting is acceptable providing the vent is located in the up posi-tion. Vertical mounting with the terminals down is not recommended because the capacitor life may be re-duced and the operation of the pressure relief vent im-paired.CLEANINGSolvent residues on the capacitors after cleaning may penetrate the seal and cause internal corrosion result-ing in shortened life. Alcohol or water detergent clean-ing is not usually harmful but halogenated cleaning solvents are not recommended and should be avoided.SAFETYBecause the watt−second value of these capacitors is high, precautions should be taken during the testing of these devices.Discharge resistors should be specified when there isa possibility of a residual charge left on the capacitoror to protect contacts. Mis−application, such as ex-ceeding design limits or applying continuous AC volt-age, may result in destruction or explosion of capaci-tors.ORDERING INFORMATIONMSC125V21 SeriesVoltageCapacitance62NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW63NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 110/125VAC Ratings and DimensionsNTE Type Number CapacitanceCase Dimensions * − Inch (mm)Case Style AccessoriesF D H C MSC125V2121−25 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSCH −01, MSCH −05, MSCH −09MSC125V2525−30 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V3030−36 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V3636−43 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V4343−52 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V5353−64 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V7272−86 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V8888−106 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V108108−130 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V124124−149 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V130130−156 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V145145−174 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V161161−193 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V189189−227 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V200200−240 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSC125V216216−259 1.438 (36.53) 3.38 (85.85)0.50 (12.70)F MSC125V233233−280 1.438 (36.53) 3.38 (85.85)0.50 (12.70)F MSC125V270270−324 1.438 (36.53) 3.38 (85.85)0.50 (12.70)F MSC125V300300−360 1.438 (36.53) 3.38 (85.85)0.50 (12.70)F MSC125V324324−389 1.810 (45.97) 4.38 (111.25)0.63 (16.00)J MSCH −02, MSCH −06, MSCH −10, MSCH −11MSC125V340340−408 1.810 (45.97) 3.38 (85.85)0.63 (16.00)H MSC125V378378−454 1.810 (45.97) 3.38 (85.85)0.63 (16.00)H MSC125V400400−480 1.810 (45.97) 3.38 (85.85)0.63 (16.00)H MSC125V430430−516 1.810 (45.97) 3.38 (85.85)0.63 (16.00)H MSC125V460460−552 1.810 (45.97) 3.38 (85.85)0.63 (16.00)H MSC125V540540−648 1.810 (45.97) 3.38 (85.85)0.63 (16.00)H MSC125V590590−708 1.810 (45.97) 4.38 (111.25)0.63 (16.00)J MSC125V708708−850 1.810 (45.97) 4.38 (111.25)0.63 (16.00)J MSC125V829829−995 1.810 (45.97) 4.38 (111.25)0.63 (16.00)J MSC125V10001000−1200 2.060 (52.32) 4.38 (111.25)0.88 (22.35)K MSCH −03, MSCH −07, MSCH −11MSC125V10201020−1240 2.060 (52.32) 3.38 (85.85)0.88 (22.35)H MSCH −02, MSCH −06, MSCH −10, MSCH −11MSC125V12801280−1536 2.060 (52.32) 4.38 (111.25)0.88 (22.35)K MSCH −03, MSCH −07, MSCH −11MSC125V15001500−1800 2.060 (52.32) 4.38 (111.25)0.88 (22.35)K MSC125V18001800−21602.560 (65.02)4.38 (111.25)0.88 (22.35)K165VAC Ratings and DimensionsNTE Type NumberCapacitanceCase Dimensions * − Inch (mm)Case Style AccessoriesF D H C MSC165V108108−130 1.437 (36.5) 2.75 (69.85)0.50 (12.70)E MSCH −01, MSCH −05, MSCH −09MSC165V124124−149 1.437 (36.5) 2.75 (69.85)0.50 (12.70)E MSC165V161161−193 1.437 (36.5) 2.75 (69.85)0.50 (12.70)E MSC165V189189−227 1.437 (36.5) 2.75 (69.85)0.50 (12.70)E MSC165V216216−259 1.437 (36.5) 2.75 (69.85)0.50 (12.70)E MSC165V233233−280 1.437 (36.5) 2.75 (69.85)0.50 (12.70)E MSC165V270270−324 1.437 (36.5) 3.37 (85.50)0.50 (12.70)F MSC165V340340−408 1.812 (46.0) 3.37 (85.50)0.63 (16.00)H MSCH −02, MSCH −06, MSCH −10, MSCH −11MSC165V378378−455 1.812 (46.0) 3.37 (85.50)0.63 (16.00)H MSC165V400400−480 1.812 (46.0) 3.37 (85.50)0.63 (16.00)H MSC165V460460−552 1.812 (46.0) 3.37 (85.50)0.63 (16.00)H MSC165V540540−648 1.812 (46.0) 3.37 (85.50)0.63 (16.00)H MSC165V590590−7081.812 (46.0)4.37 (110.90)0.63 (16.00)KMSCH −03, MSCH −07, MSCH −11*These dimensions are for reference only, please consult the factory for actual size.220/250VAC Ratings and DimensionsNTE Type Number Capacitance Case Dimensions * − Inch (mm)CaseStyleAccessoriesF D H CMSC250V2121−25 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSCH−01, MSCH−05, MSCH−09 MSC250V2525−30 1.438 (36.53) 2.75 (69.85)0.50 (12.70)EMSC250V3030−36 1.438 (36.53) 2.75 (69.85)0.50 (12.70)EMSC250V3636−43 1.438 (36.53) 2.75 (69.85)0.50 (12.70)EMSC250V4343−52 1.438 (36.53) 2.75 (69.85)0.50 (12.70)FMSC250V5353−64 1.438 (36.53) 2.75 (69.85)0.50 (12.70)FMSC250V7272−86 1.810 (45.97) 3.38 (85.85)0.63 (16.00)H MSCH−02, MSCH−06, MSCH−10, MSCH−11 MSC250V8888−106 1.810 (45.97) 3.38 (85.85)0.63 (16.00)HMSC250V108108−130 1.810 (45.97) 3.38 (85.85)0.63 (16.00)HMSC250V124124−149 1.810 (45.97) 4.38 (111.25)0.63 (16.00)JMSC250V130130−156 1.810 (45.97) 4.38 (111.25)0.63 (16.00)JMSC250V145145−174 1.810 (45.97) 4.38 (111.25)0.63 (16.00)JMSC250V161161−193 2.060 (52.32) 4.38 (111.25)0.88 (22.35)K MSCH−03, MSCH−07, MSCH−11 MSC250V189189−227 2.060 (52.32) 4.38 (111.25)0.88 (22.35)KMSC250V216216−259 2.060 (52.32) 4.38 (111.25)0.88 (22.35)KMSC250V233233−280 2.060 (52.32) 4.38 (111.25)0.88 (22.35)KMSC250V270270−324 2.060 (52.32) 4.38 (111.25)0.88 (22.35)KMSC250V400400−480 2.060 (52.32) 4.38 (111.25)0.88 (22.35)KMSC250V540540−648 2.560 (65.02) 4.38 (111.25)0.88 (22.35)L MSCH−04, MSCH−08, MSCH−11 MSC250V645645−774 2.560 (65.02) 4.38 (111.25)0.88 (22.35)LMSC250V708708−850 2.560 (65.02) 4.38 (111.25)0.88 (22.35)L330VAC Ratings and DimensionsNTE Type Number Capacitance Case Dimensions * − Inch (mm)CaseStyleAccessoriesF D H CMSC330V2121−25 1.438 (36.53) 2.75 (69.85)0.50 (12.70)E MSCH−01, MSCH−05, MSCH−09MSC330V2525−30 1.438 (36.53) 2.75 (69.85)0.50 (12.70)FMSC330V3030−36 1.438 (36.53) 2.75 (69.85)0.50 (12.70)FMSC330V3636−43 1.438 (36.53) 2.75 (69.85)0.50 (12.70)FMSC330V4343−56 1.438 (36.53) 3.38 (85.85)0.50 (12.70)FMSC330V5353−64 1.810 (45.97) 3.38 (85.85)0.63 (16.00)H MSCH−02, MSCH−06, MSCH−10, MSCH−11 MSC330V7272−86 1.810 (45.97) 4.38 (111.25)0.63 (16.00)JMSC330V8888−106 1.810 (45.97) 4.38 (111.25)0.63 (16.00)JMSC330V108108−130 2.060 (52.32) 4.38 (111.25)0.88 (22.35)K MSCH−03, MSCH−07, MSCH−11MSC330V124124−149 2.060 (52.32) 4.38 (111.25)0.88 (22.35)KMSC330V130130−156 2.060 (52.32) 4.38 (111.25)0.88 (22.35)KMSC330V145145−174 2.060 (52.32) 4.38 (111.25)0.88 (22.35)KMSC330V161161−193 2.560 (65.02) 4.38 (111.25)0.88 (22.35)L MSCH−04, MSCH−08, MSCH−11MSC330V189189−227 2.560 (65.02) 4.38 (111.25)0.88 (22.35)LMSC330V216216−259 2.560 (65.02) 4.38 (111.25)0.88 (22.35)LMSC330V270270−324 2.560 (65.02) 4.38 (111.25)0.88 (22.35)LMSC330V340340−408 2.560 (65.02) 4.38 (111.25)0.88 (22.35)LMSC330V400400−480 2.560 (65.02) 4.38 (111.25)0.88 (22.35)LMSC330V460460−552 2.560 (65.02) 4.38 (111.25)0.88 (22.35)L*These dimensions are for reference only, please consult the factory for actual size.64NTE Electronics, Inc. Voice (973) 748−5089 FAX (973) 748−6224 。
promega 实时荧光 mt 细胞活力检测试剂盒说明书
G9711, G9712 and G97132021版 CTM645原英文技术手册TM645中文说明书适用产品目录号： W6010, W6011 和 W6012Lumit™ Human IL-1βImmunoassay普洛麦格(北京)生物技术有限公司Promega (Beijing) Biotech Co., Ltd 地址：北京市东城区北三环东路36号环球贸易中心B座907-909电话：************网址：技术支持电话：400 810 8133(手机拨打)技术支持邮箱：*************************CTM6452021制作1所有技术文献的英文原版均可在/ protocols 获得。
请访问该网址以确定您使用的说明书是否为最新版本。
如果您在使用该试剂盒时有任何问题，请与Promega 北京技术服务部联系。
电子邮箱：*************************1. 产品描述 (2)2. 产品组分和储存条件 (4)3. 开始实验前 (5)4. 培养细胞的直接（无转移）方案 (7)4. A. 细胞铺板和处理 (7)4. B. 制备人IL-1β标准品稀释液 (8)4. C. 将5X抗hIL-1β抗体混合物添加至检测孔 (9)4. D. 将 Lumit™检测试剂B添加至检测孔 (10)5. 可选样品转移方案 (11)5. A. 细胞铺板和处理 (11)5. B. 制备人IL-1β标准品稀释液 (12)5. C. 将2X抗hIL-1β抗体混合物添加至样品孔 (13)5. D. 将 Lumit™检测试剂B添加至样品孔 (14)6. 结果计算 (15)7. 代表性数据 (15)8. 疑难解答 (20)9. 附录 (21)9. A. 加工后的人IL-1β选择性的示例数据 (21)9. B. 炎症小体抑制多重检测的示例数据 (22)9. C. 参考文献 (23)9. D. 相关产品 (24)Lumit™ Human IL-1β Immunoassay普洛麦格(北京)生物技术有限公司Promega (Beijing) Biotech Co., Ltd 地址：北京市东城区北三环东路36号环球贸易中心B座907-909电话：************网址：技术支持电话：400 810 8133(手机拨打)技术支持邮箱：*************************CTM6452021制作21. 产品描述Lumit™ Human IL-1β Immunoassay(a,b)是可用于检测从细胞中释放的白介素1β（IL-1β）的均质生物发光检测试剂盒，操作过程中无需样品转移或洗涤。
DS90C365中文
DS90C385/DS90C365+3.3v可编程LVDS发送器，24-Bit平面直角显示器（FPD）85MHz 传输速率，+3.3V可编程LVDS发送器，24-Bit平面直角显示器（FPD）85MHz传输速率概述：DS90C385可将28位的LVCOMS/LVTTL数据转换为LVDS(Low Voltage Differential Signaling低电压差分信号)数据流。
一个锁相环产生的传输时钟与五通道LVDS线路上传输的数据并行传输。
传输时钟的每个周期，28位的输入数据会被采样和发送。
当传输时钟频率为85MHz时，24位的RGB数据和三位的LCD时序信号和控制信号(FPLINE,FPFRAME,DRDY)在每个LVDS数据通道上以595Mbps传输。
当使用85MHz时钟，数据输出流量为297.5Mbytes/sec。
同样也可购买到的是DS90C365，可将21位的LVCOMS/LVTTL数据转换为三通道LVDS数据流。
这两种芯片都可以通过一个专用的引脚来编程，设置上升沿选通或下降沿选通。
一个上升沿选通或下降沿选通发送器将和一个下降沿选通接收器(DS90CF386/DS90CF366)无传输逻辑的直接互操作。
DS90C385同时还提供64球的FBGA封装，面积比TSSOP封装减小44%。
本芯片组是解决EMI和有关TTL接口电缆尺寸、位宽、高速问题的理想选择。
特点：■20-85MHz移位时钟支持。
■TxINPUTs有最佳类型和保持时间设置。
■Tx功耗<130mW(typ)@85MHz灰度■支持VGA,SVGA,XGA和Dual Pixel SXGA■窄总线减少了电缆的尺寸和成本。
■高达2.38Gbps传输速率。
■高达297.5Megabytes/sec位宽。
■345mV(typ)摆幅LVDS器件，低EMI特性。
■PLL不需要外部器件。
■兼容TIA/EIA-644LVDS标准。
■低剖面56脚或48脚TSSOP封装。
台盼蓝染色细胞存活率检测试剂盒说明书
台盼蓝染色细胞存活率检测试剂盒产品编号 产品名称包装 C0011台盼蓝染色细胞存活率检测试剂盒100次产品简介：碧云天生产的台盼蓝染色细胞存活率检测试剂盒(Trypan Blue Staining Cell Viability Assay Kit ），是利用正常的健康细胞能够排斥台盼蓝，而丧失细胞膜完整性的细胞可以被台盼蓝染色研制而成。
严格来说，台盼蓝染色检测的是细胞膜的完整性，通常认为细胞膜丧失完整性，即可认为细胞已经死亡。
台盼蓝染色后，通过显微镜下直接计数或显微镜下拍照后计数，就可以对细胞存活率进行比较精确的定量。
台盼蓝染色后的HeLa 细胞请参考图1。
图1. 细胞台盼蓝染色效果图。
胰酶消化下来的HeLa 细胞，1000g 离心1分钟，弃上清，用适量细胞重悬液重悬后，用等体积台盼蓝染色液(2X)染色。
箭头所示为台盼蓝染色的死亡细胞。
注：本HeLa 细胞经过一定的细胞坏死诱导处理。
台盼蓝染色只需3-5分钟即可完成，并且操作非常简单。
本试剂盒足够检测100个细胞样品。
包装清单：产品编号 产品名称 包装 C0011-1 台盼蓝染色液(2X) 10ml C0011-2细胞重悬液 100ml —说明书1份保存条件：4ºC 保存，一年有效。
注意事项：本试剂盒提供的两种溶液都是无菌的，使用时最好在超净台内进行，避免细菌污染。
本产品长时间存放可能会出现少量颗粒状沉淀，可在37ºC 水浴约10分钟以充分溶解沉淀。
沉淀完全溶解后即可正常使用。
台盼蓝对人体有毒，操作时请特别小心，并注意有效防护以避免直接接触人体或吸入体内。
本产品仅限于专业人员的科学研究用，不得用于临床诊断或治疗，不得用于食品或药品，不得存放于普通住宅内。
为了您的安全和健康，请穿实验服并戴一次性手套操作。
使用说明：1. 收集细胞：对于贴壁细胞先用胰酶和/或EDTA 消化下细胞。
对于悬浮细胞，则可以直接收集细胞。
把收集的细胞在1000-2000g 离心1分钟，弃上清，用1毫升或根据细胞的量用适当细胞重悬液重新悬起细胞。
上海庆科信息技术有限公司 Wi-Fi 蓝牙模组 EMC3080 产品说明书
概 要● 电压输入： 3.0V~3.6V● 处理器：Cortex-M33内核处理器MX1300CF▪ MX1300CF ：主频高达100MHz ▪ SWD/JTAG 仿真调试接口● 存储器▪ 256K 字节的 SRAM ▪ 384K 字节的 ROM ▪ 2M 字节的 XIP Flash ● Wi-Fi▪ IEEE 802.11 b/g/n 1T1R 2.4GHz 单频 ▪ 支持 HT20，最高支持 65Mbps@MCS7 ▪ 802.11e QoS Enhancement (WMM)▪ 支持 WPA/WPA2 PSK ，Open/WEP/TKIP/CCMP ▪ 支持 WPA/WPA2 Enterprise ▪ 支持 WPS ，Wi-Fi Direct ▪ 支持 IEEE Power Save 节能模式 ▪ IEEE 802.11 b/g/n 1T1R 2.4GHz 单频 ▪ 支持HT20，最高支持65Mbps@MCS7▪ 支持WPA/WPA2 Personal/WPA2 Enterprise/WPA3 ▪ 支持STA ，SoftAP 和Monitor 模式 ● Bluetooth▪ 符合 4.2 标准的低功耗蓝牙 BLE▪ Wi-Fi 和 BLE 时分复用，共用同一个 PA 和天线▪ 支持蓝牙从模式，可用于蓝牙配网● 接口和尺寸▪ 保持与同类封装模组的引脚兼容性▪ 板载 PCB 天线，或者用 IPEX 连接器接外接天线 ▪ ▪ 18mm x 33mm ，邮票孔或插针● 丰富的配套软件▪ 支持AliOS 和MXOS 自主操作系统 ▪ 提供各大云平台接入SDK 和AT 指令 ▪ 提供各种典型应用的可量产固件 ● 典型应用▪ 智能家电 ▪ 智能电工产品 ▪ 工业自动化● 订货代号订货代号 说明EMC3080-PZI5 板载PCB 天线，MX1300CF 处理器， 工作温度：-20~85℃EMC3080-EZI5 外接天线座，MX1300CF 处理器， 工作温度：-20~85℃EMC3080-PZI7 板载PCB 天线，MX1300CF 处理器， 工作温度：-40~105℃EMC3080-EZI7外接天线座，MX1300CF 处理器， 工作温度：-40~105℃EMC3080 Wi-Fi/BLE 物联网模组内置ARM Cortex-M33 MCU2.4G Hz IEEE 802.11 b/g/n ，Bluetooth 4.2，超高集成度，丰富的外设版本：1.6日期：2023-08-21编号：DS0156CN系列订货代码例如EMC 3 08 0 -P Z I 5 -xxx 产品系列EMC = 物联网Wi-Fi/BLE Combo模组产品类型3 = 焊接类无线模组典型目标应用和功能08 = IOT物联网应用8系列外形尺寸，增强功能0 = 18mm x 33mm，2 x 6 pins 2.0间距邮票孔+ 9 pins 2.0间距邮票孔或插针射频接口P = 2.4GHz板载PCB天线E = 2.4GHz外置天线IPEX接头PSRAM容量(可选)Z=不含PSRAMJ=4M字节的PSRAMFlash容量I = 2M字节的Flash存储温度范围5 = 工业级温度范围，-30°C~85°C7 = 工业级温度范围，-40°C~105°C可选项TR = 卷带包装（默认使用托盘）如需了解所有相关特性清单（如包装，最小订单量等）和其他方面的信息，请联系就近MXCHIP销售点和代理商。
Pendulum CNT-90XL 脉冲RF计数分析仪数据表说明书
Counter/Analyzer is an excellent tool for measurement, analysis and calibration of Microwave Frequency, Power, and Pulsed RF time parameters like pulse width and PRI. Whether in test systems, on the R&D bench, in the calibration lab or out in the field, the high-resolution and ultra-fast CNT-90XL is the state-of-the-art Microwave Counter/Analyzer. The NEW option for pulsed RF makes CNT-90XL ideal for radar test and calibration. The CNT-90XL offers a unique ease-of-use with graphical display and improved control over measurement at an affordable price.The Fastest Microwave CounterThe CNT-90XL Microwave Counter/Analyzer sets a new industry standard for microwave frequency analysis and outperforms any microwave Pulse or CW counter on the market regarding resolution, speed and acquisition time. The CNT-90XL is the worlds fastest Microwave counter and offers a measurement speed up to 250,000 frequency samples/s, for advanced statistical analysis, and for analysis of frequency or power transients.The NEW Pulsed RF option enables measurements of pulses down to 30 ns width, plus PRI/PRF, frequency in burst and power in burst.The multi-functional CNT-90XL also serves as a 400 MHz general purpose timer/counter, with unique ease-of-use with analysis capabilities to view variations in signal parameters both numerically and graphically.Save money in production testThe CNT-90XL is intended for several applications, such as:• Pulsed, Chirped, and Doppler Radar testing and calibration• Microwave link carrier calibration• Satellite communication equipment testing• RF and microwave instrumentation calibration• RF components and modules, including YIG and VCO testing• Medical RF equipment testing Product Features And Benefits• Pulsed RF measurements (optional) includes Pulse Width to 30 ns, PRI/PRF, Frequency in Burst, Power in Burst• Fast high-resolution frequency or power measurements, for modulation, doppler shifts, or transient analysis• Very short acquisition time of 25 ms (Auto) or zero (Manual)• High sensitivity (-33 dBm)• Statistical processing and graphical histogram, trend and modulation display• Affordable microwave frequency countingProduct Features And Benefits• High resolution is vital for R&D and production testing. CNT-90XL meets this requirement with 100 ps single shot (time) or 12 digits/s (frequency). Obtained values are displayed with up to 14 digits.• For calibration purposes, the CNT-90XL offers very high accuracy through stable internal OCXO time base, plus high resolution.• Both USB and GPIB interfaces are standard. With USB you won’t need to invest in a GPIB interface card for your PC. The GPIB operates in either SCPI/GPIB or 53131 emulation mode, for plug-and-play replacement in existing ATE systems.• Menu-oriented settings reduce the risk of mistakes. Valuable signal information, given in multi-parameter displays, removes the need for other instruments like DVM’s and Scopes.Battery OptionThe CNT-90XL has an optional battery pack with 90 Wh capacity, capable of mains-free operation for at least 4.5 hours. In stand-by mode the battery pack can keep an OCXO warm and running for over 24 hours. Battery operation of a frequency counter/analyzer is valuable in three different applications:• Transportation of high-stability OCXO to maintain stability, which gives instant use at destination without any warm-up time• Battery backup acting as a built in UPS (Uninterrupted Power Supply)TimeView®, Modulat ion Domain Analysis SWThe optional Modulation Domain SW TimeView® is the ultimate tool to view and analyze dynamic frequency changes in real-time, utilizing the high-resolution PC screen, marker read-outs and processing, FFT calculation to find modulation frequencies, ADEV calculation of short-term stability and more.Excellent Graphical PresentationOne of the great features of the CNT-90XL is the graphical display and the menu oriented settings. The non-expert can easily make correct settings without risking costly mistakes. The multi-parameter display shows auxiliary measurement values such as Power level in dBm in Frequency measurements.Measurement values are presented both numerically and graphically. The graphical presentation of results (histograms, trends etc.) gives a much better understanding of the nature of signal jitter. It also provides you with a much better view of changes vs time, from long term trends like slow drift, to fast modulation and transients. Three statistical views of the same data set can be viewed: Numerical, Histogram and Modulation/T rend. It is very easy to capture and toggle between views of the same data.When adjusting a frequency source to given limits, the Limit qualifying tool gives fast and accurate visual guidance. T olerance limit markers are visually displayed and the actual frequency is graphically displayed inside or outside the limit markers. Passing the limits will cause an alarm indication.The graphical display examples below show the frequency changes over time directly on-screen, for example Doppler frequency shift in speed radar sensors, fast power switching, FM or AM. Builtin statistical processing presents numerical stability data and also frequency distribution histograms on-screen for analysis of frequency stability or modulation.Figure 2:Pulse modulated frequency or FSKFigure 3:Generator start-up power settlingFigure 4:Very small AM on carrier is visualizedFigure 5:Numeric statistics screen of the previous AM signalFigure 6:Power step from generator (-30 to -5dBm in 5dBm steps) NOTE: output is turned off shortly betw. power stepsFigure 7:Power step (close up)Figure 1:1kHz FM with 12 ppm modulation depthMeasuring FunctionsFrequency A, B, CRange:Input A, B: 0.002 Hz to 400 MHzInput C: 300 MHz to 27, 40, 46 or 60 GHz Resolution: 12 digits in 1s measuring time Acquisition C: Auto or ManualAcquisition time: 25 ms in Auto (typ.)*Note: Some frequencies may not be acquired correctly with Auto Acquisition. If so, switch to Manual Acquisition instead Aux. Parameters:Input A, B: Vmax, Vmin, Vp-pInput C: Power C in dBm or WFrequency Burst A, BRange:Input A, B: 0.002 Hz to 400 MHzInput C: Requires option 28 - see “Pulsed RF” specs Minimum Burst Duration: Down to 40 ns Minimum Pulses in Burst:Input A or B: 3 (6 above 160 MHz)PRF Range: 0.5 Hz to 1MHzStart Delay: 10 ns to 2sec., 10 ns resolution Aux. Parameter: PRFPeriod A, B (single or average), C (average) Mode: Single, AverageRange:Input A, B: 2.5 ns to 1000 sInput C: 3.3 ns down to 37, 25, 22 or 17 ps Resolution: 100 ps (single); 12 digits/s (avg) Acquisition C: Auto or ManualAcquisition time: 25 ms in Auto (typ.)Aux. Parameters: See Freq. A, B, or C measurements Ratio A/B, B/A, C/A, C/BRange: (10-9) to 1011Input Frequency:Input A, B: 0.1 Hz to 300 MHzInput C: 300 MHz to 27, 40, 46 or 60 GHzAux Parameters: Freq 1, Freq 2Time Interval A to B, B to A, A to A, B to B Range:Normal Calculation: 0ns to +106 sec.Smart Calculation: -106 sec. to +106 sec. Resolution: 100 psMin. Pulse Width: 1.6 nsSmart Calculation: Smart Time Interval to determine sign (A before B or A after B) Positive and Negative Pulse Width A, B Range: 2.3 ns to 106 sec.Min. Pulse Width: 2.3 nsAux. Parameters: Vmax,Vmin, Vp-pRise and Fall Time A, BRange: 1.5 ns to 106 sec.Trigger Levels: 10% and 90% of signal Vp-p Min. Pulse Width: 1.6 nsAux. Parameters: Slew rate, Vmax, Vmin Positive and Negative Duty Factor A, B Range: 0.000001 to 0.999999Freq. Range: 0.1 Hz to 300 MHzAux. parameters: Period, pulse widthPhase A Relative B, B Relative ARange: -180° to +360°Resolution: Single-cycle: 0.001° to 10 kHz, decreasing to 1° >10 MHz. Resolution can be improved via averaging (statistics)Freq. Range: up to 160 MHzAux. Parameters: Freq (A), Va/Vb (in dB)Vmax, Vmin, Vp-p A, BRange: -50 V to +50 V, -5V to +5VRange is limited by the specifi cation for max i nputvoltage without damage (see input A, B)Freq. Range: DC, 1Hz to 300 MHzMode: Vmax, Vmin, Vp-pResolution: 2.5 mVUncertainty (5V range, typical):DC, 1Hz to 1kHz: 1% +15 mV1kHz to 20 MHz: 3% +15 mV20 to 100 MHz: 10% +15 mV100 to 300 MHz: 30% +15 mVAux parameters: Vmin, Vmax, Vp-pTime Stamping A, B, CRaw time stamp data together with pulse countson inputs A, B or C, accessible via GPIB or USBonly.Max Sample Speed: See GPIB specificationsMax Frequency: 160 MHzTimestamp Resolution: 70 psPower CRange:Power: -35 dBm to +10 dBmFrequency: 300 MHz to 27, 40, 46 or 60 GHzDisplay units: dBm (default) or WResolution: 0.01 dBm @100 ms measuring timeAccuracy (typ.): <1dBm to 27 GHz;<2dBm to 40 GHz; <3dBm to 60 GHzAcquisition:Auto or Manual (within ±40 MHz)Acquisition time: 20 to 30 ms in Auto (typ.)Aux.Parameters: Frequency CPulsed RF parameters (Option 28)Pulse ON voltage range:0.4 to 40 GHz: -15 dBm to +13 dBm(-20 dBm typ. to +13 dBm)40 to 46 GHz: -10 dBm (typ.) to +13 dBm46 to 60 GHz: 0 dBm (typ.) to +10 dBmMin ON/OFF ratio: 15 dBPulse WidthRange: 30 ns to 1 sec.Resolution: 200 ps rmsAccuracy: <10 ns+TBE*P_widthPRI (pulse repetition interval)Range: 60 ns to 1 sec.Resolution: 200 ps rmsAccuracy: <2 ns +TBE*PRI*PRF (pulse repetition frequency)Range: 1 Hz to 16.7 MHz (20 MHz typ.)Resolution: (200ps/Meas_time)*PRF HzFrequency in BurstRange: 400 MHz to 60 GHzPulse width: down to 100 nsResolution: (50ps/ √N/Gate_time)*FREQ Hz*Acquisition: ManualPeak Power in BurstRange: - 20dBm to +10 dBmPulse width: down to 50 usAcquisition: ManualResolution: 0.1 dBm < 1ms pulse0.01 dBm>1ms pulse* N = number of RF pulses during total measurement* TBE=number of RF pulses during total measurement (e.g. 6E-8)*Gate=meas. time inside each RF pulseInput and Output SpecificationsInputs A and BFrequency Range:DC-Coupled: DC to 400 MHzAC-Coupled: 10 Hz to 400 MHzImpedance: 1MΩ // 20 pF or 50 Ω (VSWR ≤2:1)Trigger Slope: Positive or negativeMax. Channel Timing Difference: 500 psSensitivity:DC-200 MHz: 15 mVrms200-300 MHz: 25 mVrms300-400 MHz: 35 mVrmsAttenuation: x1, x10Dynamic Range (x1):30 mVp-p to 10 Vp-p within ±5V windowTrigger Level: Read-Out on displayResolution: 3mVUncertainty (x1): ±(15 mV + 1% of trigger level)AUTO T rigger Level: Automatically set to 50% point ofinput signal (10% and 90% for Rise Fall Time)AUTO Hysteresis:Freq. range: 1Hz to 300 MHzTime: Min hysteresis window (hysteresis compensation)Frequency: 40% of input signal amplitude (typ.)Analog LP Filter: Nominal 100 kHz, RC-type.Digital LP Filter:1Hz to 50 MHz cut-off frequencyMax Voltage Without Damage:1M: 350 V (DC + AC pk) to 440 Hz, falling to 12Vrms at 1MHz; 50Ω : 12 VrmsConnector: BNCInput CFreq. Range: 0.3 to 27, 40, 46, 60 GHz dependingon modelOperating input voltage range:0.3 to 18 GHz: -33 to +13 dBm18 to 20 GHz: -29 to +13 dBm20 to 27 GHz: -27 to +13 dBm27 to 40 GHz: -23 to +13 dBm40 to 46 GHz: -17 to +13 dBm46 to 60 GHz: -15 to +10 dBmImpedance: 50Ω nominal, AC coupledVSWR:0.3 to 27 GHz: <2.0:1 (typ.)27 to 46 GHz: <2.5:1 (typ.)46 to 60 GHz: <3.0:1 (typ.)FM tolerance:Manual acq.: 50 MHz p-p; freq C >3.5 GHz30 MHz p-p; freq C <3.5 GHzAuto acq.: 20 MHz p-p; for any freq C andmodulation frequency > 0.1 MHzAM tolerance:Any modulation index (minimum signal must bewithin sensitivity range)Automatic Amplitude Discrimination:10 dB separation between 2 signals within30 MHz, 20 dB otherwiseMax Voltage Without Damage: +25 dBmOverload indication:ON when input C power >+10 dBmConnector:27 and 40 GHz: 2.92 mm sparkplug female46 and 60 GHz: 1.85 mm sparkplug female(all connectors are field replaceable)Rear Panel Inputs and OutputsReference Input: 1, 5, or 10 MHz; 0.1 to 5Vrmssine; impedance ≥ 1kΩReference Output:10 MHz; >1Vrms sine into 50ΩArming Input:Arming of all measuring functionsImpedance: Approx. 1kΩFreq. Range: DC to 80 MHzConnector: BNC© Pendulum Instruments Measuring FunctionsTrigger Hold-OffTime Delay Range: 20 ns to 2sec., 10 ns resolutionExternal Start and Stop ArmingModes: Start and Stop ArmingInput Channels: A, B or E (Ext. Arming input)Max Rep. Rate for Arming Signal:Channel A, B: 160 MHz Channel E: 80 MHzStart Time Delay Range:20 ns to 2sec., 10 ns resolutionStatisticsFunctions: Maximum, Minimum, ΔMax-Min, Mean, Standard Deviation and Allan Deviation Display: Numeric, histograms or trend plots Sample Size: 2 to 2 x 109 samplesLimit Qualifier: OFF or Capture values above/below/inside or outside limitsMeasurement Pacing: 4s to 500 sec.MathematicsFunctions: (K*X+L)/M, (K/X+L)/M or X/M-1. X is current reading and K, L and M areconstants; set via keyboard or as frozen reference value (X 0)Other FunctionsMeasuring Time: 20 ns to 1000 s for Frequency, Burst, PRF, Period Average and Power.Single cycle for other measuring functions Timebase Reference:Internal, External or AutomaticDisplay Hold: Freezes result, until a new measurement is initiated via RestartLimit Alarm: Graphical indication on front panel and/or SRQ via GPIBLimit Values: Lower limit, Upper limitSettings: OFF or Alarm if value is above/below/inside or outside limitsOn Alarm: STOP or CONTINUE Display: Numeric + GraphicStored Instrument Set-ups: 20 instrument setups can be saved/recalled from internalnonvolatile memory. 10 can be user protected.Result Storage: Up to 8 measurements of max 32k samples can be stored in local memory for later downloading.Display: Backlit LCD Graphics screen for menu control, numerical read-out and status information Number of Digits: 14 digits in numerical mode Resolution: 320*97 pixelsGPIB InterfaceCompatibility: IEEE 488.2-1987, SCPI 1999 or 53131A/53132A compatibility mode Interface Functions:SH1, AH1, T6, L4, SR1, RL1, DC1, DT1, E2Max. Measurement Rate:GPIB: 5k readings/s (block mode) 500 readings/s (individual GET trig’ed)T o Internal Memory: 250k readings/sInternal Memory Size: Up to 750k readings.USB InterfaceUSB Version: 2.0 Full speed (11 Mbits/s)CalibrationMode: Closed case, menu controlledCal. Frequencies: 0.1, 1, 5, 10, 1.544 and 2.048 MHzGeneral SpecificationsEnvironmental DataClass: MIL-PRF-28800F, Class 3Operating T emp: 0 °C to +50 °C Storage T emp: -40 °C to +71 °C Humidity: 5%-95% (10 °C to 30 °C)5%-75% (30 °C to 40 °C)5%-45% (40 °C to 50 °C)Altitude: 4 600 mVibration: Random and sinusoidal according to MIL-PRF-28800F, Class 3Shock: Half-sine 30G per MIL-PRF-28800F Bench handlingTransit drop test: According to MIL-PRF-28800F Safety: EN 61010-1, pollution degree 2, meas cat I, CSA C22.2 No 1010-1, CEEMC: EN 61326 (1997); A1 (1998), increased test levels according to EN 50082-2, Group 1, Class B, CEMains power: 90 to 265 Vrms, 45 to 440 Hz, <40 W, <60 W if battery optionDimensions and WeightWidth x Height x Depth:210x90x395 mm (8.25x3.6x15.6 in)Weight: Net 2.7 kg (5.8 lb),Shipping app. 3.5 kg (app. 7.5 lb)Ordering InformationBasic Models CNT-90XL-27G:27 GHz Microwave Counter/Analyzer CNT-90XL-40G:40 GHz Microwave Counter/Analyzer CNT-90XL-46G:46 GHz Microwave Counter/Analyzer CNT-90XL-60G:60 GHz Microwave Counter/AnalyzerTime Base: Medium Stability Oven Time Base;0.06 ppm/month as standardIncluded with Instrument: 3 years product warranty 1,line cord, user documentation on CD, andCertificate of Calibration1The warranty period may be dependent on country.Pulsed RF OptionOption 28: Pulsed RF measurementsTime Base OptionsOption 30/90: Very High Stability Oven Time Base; 0.01 ppm/monthOption 40/90: Ultra High Stability Oven Time Base; 0.003 ppm/monthOption 23/90 Battery UnitBattery Type: Li-Ion, 90 WhExternal DC input: 10 to 18 Vdc; max 6A Operating temp. range: 0 °C to 40 °C Storage: -20 °C to +60 °C, 1 month -20 °C to +45 °C, 3 months -20 °C to +20 °C, 1 yearBattery operating time (at 25°C):ON: >4.5 hoursStand-by: >24 hours Charging:Automatically when AC or ext DC is connected Battery status indicator:On-screen with Low battery warning Weight: 2.3 kg (4.9 lb)Optional AccessoriesOption 22/90: Rack-Mount Kit Option 27: Carrying Case - softOption 27H: Heavy-duty Hard T ransport Case Option 29/90: TimeView Modulation Domain Analysis SW for CNT-90XLOption 90/06: Calibration Certifi cate with Protocol; Oven oscillatorOption 90/00: Calibration Certifi cate with Protocol; Frequency aging/weekOption 95/05: Extended warranty from 3 to 5 yearsOM-90: Users Manual English (printed)PM-90: Programmers Manual English (printed)SM-90: Service Manual English GS-90-EN: Getting Started English GS-90-FR: Getting Started French GS-90-DE: Getting Started GermanTime Base OptionsOption model Standard:30/9040/90Time base type:OCXO OCXO OCXO Uncertainty due to:-Aging per 24h per month per year-T emperature variations: 0˚C to 50˚C 20˚C to 26˚C (typ. values)<5x10-9(1)<6x10-8<2x10-7<5x10-8<2x10-8<5x10-10(1)<1x10-8<5x10-8<5x10-9<1x10-9<3x10-10(1)<3x10-9<1.5x10-8<2.5x10-9<4x10-10Short-term stability: τ =1s (root Allan Variance) τ =10s<1x10-10<1x10-10<1x10-11<1x10-11<5x10-12<5x10-12Power-on stability:Deviation vs. fi nal value after 24 h on time, after a warm-up time of:<1x10-730 min<1x10-810 min<5x10-910 minTypical total uncertainty, for operating temperature 20˚C to 26˚C, at 2σ (95%) confi dence interval:-1 year after calibration -2 years after calibration<2.4x10-7<4.6x10-7<0.6x10-7<1.2x10-7<1.8x10-8<3.5x10-81After 1 month of continuous operation。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Features
n
Small size, light weight. Low coil power consumption, heavy contact load. Strong anti-shock and anti-vibration, high
reliability, long life.
n
Suitable for automobile, machine, electronic equipment, air conditioner and household appliance applications.
Contact Data
Contact Arrangement 1A, 1B, 1C
Contact Material
Ag CdO Ag SnO 2 Ag SnO 2 In 2O 3
Contact Rating (resistive)
NO :30A/240VAC,14VDC; NC:20A/240VAC ;30A/14VDC NO;40A/250VAC,28VDC; NC:30A/250VAC,28VDC (0.9W)Max. Switching Power 1100W 7200VA
Max. Switching Voltage
110VDC 250VAC Max. Switching Current:40A Contact Resistance or Voltage drop 30m Ω Max Item 3.12 of IEC255-7Electrical 105 Item 3.30 of IEC255-7Operation life Mechanical
107 Item 3.31 of IEC255-7
Coil Parameter
DC Coil Parameter
AC Coil Parameter Coil voltage VDC
Coil resistance Ω±10%
Pick up voltageE VDC(max)(75%of rated voltage)Release voltage VDC(min)(10%of rated voltage)Coil power W
Operate Time ms Max
Release Time ms Max
Rated voltage VAC
Coil resistance Ω±10%
Coil
power
Rated Max
3 3.910/15 2.250.312(27)5 6.528/42 3.750.567.840/60 4.500.624
(120)911.790/135 6.750.91215.6160/2409.00 1.2110(2360)1519.5250/37510.25 1.51823.4360/54013.50 1.8120(3040)2431.2640/96018.00 2.44862.42560/384036.00 4.8220
(13490)
11014313445/20167
82.50
11.0
0.9/0.6
15
10
2VA
CAUTION : 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2.Pickup and release voltage are for test purposes only and are not to be used as design criteria.
Operation condition
Insulation Resistance 1000M Ω min (at 500VDC)Item 7 of IEC255-5Dielectric Strength Between contacts
Between contact and coil 50Hz 1500V 50Hz 2500V
Item 6 of IEC255-5Item 6 of IEC255-5
Shock resistance 200m/s 2 11ms
IEC68-2-27 Test Ea method 1Vibration resistance 10~55Hz double amplitude 1.5mm IEC68-2-6 Test Fc Terminals strength 10N
IEC68-2-21 Test Ua1
Solderability
230 ºC ± 2 ºC 10± 0.5s IEC68-2-20 Test Ta method 1Ambient Temperature -55~100 ºC -55~125 ºC Relative Humidity 85% (at 40 ºC)IEC68-2-3Test Ca
Mass
37g
Qualification inspection: Perform the qualification test as specified in the table IV of IEC255-19-1 and minimum sample size 24.
79
N T 90T P (T 92)
LR956331
32.4(50)×27×28.5
元器件交易网。