PCB专业术语中英文翻译【VIP专享】
PCB中英文对照词汇
PCB 中英文对照词汇一、综合词汇序号中文英文1印刷电路Printed circuit2印制线路Printed wiring3印刷板Printed board4印制板电路Printed circuit board(pcb)5印制线路板Printed wiring board(pwb)6印制元件Printed component7印制接点Printed contact8印制板装配Printed board assembly9板board10单面印制板Single-sided printed board(ssb) 11双面印制板Double-sided printed board(dsb) 12多层印制板Multilayer printed board(mlb) 13多层印制电路板Multilayer printed circuit board 14多层印制线路板Multilayer printed wiring board 15刚性印制板Rigid printed board16刚性单面印制板Rigid single-sided printed board 17刚性双面印制板Rigid double-sided printed board 18刚性多层印制板Rigid multilayer printed board 19挠性多层印制板Flexible multilayer printed board20挠性印制板Flexible printed board21挠性单面印制板Flexible single-sided printed board22挠性双面印制板Flexible double-sided printed board23挠性印制电路Flexible printed circuit(fpc)24挠性印制线路Flexible printed wiring25刚性印制线路Flex-rigid printed board 、 rigid-flexprinted board26刚性双面印制板Flex-rigid double-sided printed board、rigid-flex double-sided printed27刚性多层印制板Flex-rigid multilayer printed board、rigid-flex double-sided printed28齐平印制板Flush printed board29金属芯印制板Metal core printed board30金属基印制板Metal base printed board31多重布线印制板Mulit-wiring printed board32陶瓷印制板Ceramic substrate printed board33导电胶印制板Electroconductive paste printed board34模塑电路板Molded circuit board35模压印制板Stamped printed wiring board36顺序层压多层印制板Sequentially-laminated multilayer37散线印制板Discrete wiring board38微线印制板Micro wire board39积层印制板Build-up printed board40积层多层印板Build-up multilayer printed board (bum) 41积层挠性印制板Build-up flexible printed board42表面层合电路板Surface laminar circuit(slc)43埋入凸块连印制板B2it printed board44多层膜基板Mutil-layered film substrate(mfs) 45层间全内导通多层印Alivh multiplayer printed board制板46载芯片板Chip on board (cob)47埋电阻板Buried resistance board48母板Mother board49子板Daughter board50背板backplane51裸板Bare board52键盘板夹心板Copper-invar-copper board53动态挠性板Dynamic flex board54静态挠性板Static flex board55可断拼板Break-away planel56电缆cable57挠性扁平电缆Flexible flat cable (ffc)58薄膜开关Membrance switch59混合开关Hybrid circuit60厚膜Thick film61厚膜电路Thick film circuit62薄膜Thin film63薄膜混合电路Thin film hybrid circuit 64互连interconnection65导线Conductor trace line 66齐平导线Flush conductor 67传输线Transmission line 68跨交crossover69板边插头Edge-board contact 70增强板stiffener71基底Substrate72基板面Real estate73导线面Conductor side74元件面Component side 75焊接面Solder side76印制Printing77网格Grid78图形Pattern79导电图形Conductive pattern 80非导电图形Non-conductive pattern 81字符legend82标志mark二、基材序号中文英文1基材Base material2层压板Laminate3覆金属箔基材Metal-clad bade material4覆铜箔层压板Copper-clad laminate(ccl)5单面覆铜箔层压板Single-sided copper-clad laminate 6双面覆铜箔层压板Double-sided copper laminate 7复合层压板Composite laminate8薄层压板Thin laminate9金属芯覆铜箔层压板Metal core copper-clad laminate 10金属基覆铜层压板Metal base copper-clad laminate 11挠性覆铜箔绝缘薄膜Flexible copper-clad dielectric film 12基体材料Basis material13预浸材料Prepreg14粘结片Bonding sheet15预浸粘结片Preimpregnated bonding sheet 16环氧玻璃基板Epoxy glass substrate17加成法用层压板Laminate for additive process 18预制内层覆箔板Mass laminate panel19内层芯板Core material20催化板材Catalyzed board21涂胶催化层压板Adhesive-coated catalyzed laminate 22涂胶无催化层压板Adhesive-coated uncatalyzed laminate 23粘结层Bonding layer24粘结膜Film adhesive25涂胶粘剂绝缘薄膜Adhesive coated dielectric film26无支撑胶粘剂膜Unsupported adhesive film27覆盖层Cover layer28增强板材Stiffener material29铜箔面Copper-clad surface30去铜箔面Foil removal surface31层压板面Unclad laminate surface32基膜面Base film surface33胶粘剂面Adhesive face34原始光洁面Plate finish35粗面Matt finish36纵向Length wise direction37横向Cross wise direction38剪切板Cut to size panel39酚醛纸质覆铜箔板Phenolic cellulose paper copper-cladlaminates(phenolic paper ccl)40环氧纸质覆铜箔板Epoxide cellulose paper copper-cladlaminates(epoxy paper ccl)41环氧玻璃布基覆铜箔Epoxide woven glass fabric copper-clad 板laminate42环氧玻璃布纸复合覆Epoxide cellulose paper core glass cloth 铜箔板surfaces copper-clad laminate43环氧玻璃布玻璃纤维Epoxide non woven glass reinforced 复合覆铜箔板copper-clad laminate44聚酯玻璃布覆铜箔板Polyester wovenglass fabric copper-clad laminate45聚酰亚胺玻璃布覆铜Polyimide woven glass fabric copper-clad箔板laminate46双马来酰亚胺三嗪环Bismaleimide triazine epoxide woven 氧玻璃布覆铜板glass fabric copper-clad laminate47环氧合成纤维布覆铜Epoxide synthetic fiber copper-clad箔板laminates48聚四乙烯玻璃纤维覆Teflon fiber glass copper-clad laminate铜箔板49超薄型层压板Ultra thin laminate50陶瓷基覆铜箔板Ceramincs base copper-clad laminate 51紫外线阻挡型覆铜箔Uv blocking copper-clad laminates板三、基材的材料序号中文英文1 a 阶树脂a-stage resin2 b 阶树脂b-stage resin3 c 阶树脂c-stage resin4环氧树脂Epoxy resin5酚醛树脂Phenolic resin6聚酯树脂Polyester resin7聚酰亚胺树脂Polyimide resin8双马来酰亚胺三嗪树Bismaleimide-triazine resin脂9丙烯酸树脂Acrylic resin10三聚氰胺甲醛树脂Melamine formaldehyde resin 11多功能环氧树脂Polyfunctional epoxy resin 12溴化环氧树脂Brominated epoxy resin 13环氧酚醛Epoxy novolac14氟树脂fluroresin15硅树脂Silicone resin16硅烷silane17聚合物polymer18无定形聚合物Amorphous polymer19结晶现象Crystalline polamer20双晶现象dimorphism21共聚物copolymer22合成树脂synthetic23热固性树脂Thermosetting resin24热塑性树脂Thermoplastic resin25感光性树脂Photosensitive resin26环氧当量Weight per epoxy equipvalent(wpe) 27环氧值Epoxy value28双氰胺dicyandiamide29粘结剂binder30固化剂Curing agent31胶粘剂adesive32阻燃剂Flame retardant33遮光剂opaquer34增塑剂plasticizers35不饱和聚酯Unsatuiated polyster36聚酯薄膜polyester37聚酰亚胺薄膜Polyimide film(pi)38聚四氟乙烯Polytetrafluoetylene(ptfe)39聚四氟乙烯丙烯薄膜Perfluorinated ethylene-propylenecopolymer film(fep)40增强材料Reinforcing material41玻璃纤维Glass fiber42 E 玻璃纤维e-glass fiber43 D 玻璃纤维d-glass fiber44S 玻璃纤维s-glass fiber45玻璃布Glass fabric46非织布Non-woven fabric 47玻璃纤维垫Glass mats48纱线yarn49单丝filament50胶股strand51纬纱Weft yarn52经纱Warp yarn53但尼尔denier54经向Warp-wise55纬向Weft-wise 、 filling-wise 56织物经纬密度Thread count57织物组织Weave structure58平纹组织Plain structure59坏布Grey fabric60稀松织物Woven scrim61弓纬Bow of weave62断经End missing63缺纬Mis-picks64纬斜bias65折痕crease66云织waviness67鱼眼Fish eye68毛圈长Feather length69厚薄段mark70裂缝spilt71捻度Twist of yarn72浸润剂含量Size content73浸润剂残留量Size residue74处理剂含量Finish leval75浸润剂size76偶联剂Couplint agent77处理织物Finished fabric78聚酰胺纤维Polyarmide fiber79聚酯纤维非织布Non-woven polyester fabric 80浸渍绝缘纵纸Impregenating insulation paper 81聚芳酰胺纤维纸Aromatic polyamide paper 82断裂长Breaking length83吸水高度Height of capillary rise84湿强度保留率Wet strength retention85白度whitenness86陶瓷ceramics87导电箔Conductive foil88铜箔Copper foil89电解铜箔Electrodeposited copper foil (ed copperfoil)90压延铜箔Rolled copper foil91退火铜箔Annealed copper foil92压延退火铜箔Rolled annealed copper foil (ra copperfoil)93薄铜箔Thin copper foil94涂胶铜箔Adhesive coated foil95涂胶脂铜箔Resin coated copper foil(rcc)96复合金属箔Composite metallic material97载体搏Carrier foil98殷瓦invar99箔（剖面）轮廓Foil profile100光面Shiny side101粗糙面Matte side102处理面Treated side103防锈处理Stain proofing104双面处理铜箔Double treated foil四、设计序号中文英文1原理图Shematic diagram2逻辑图Logic diagram3印制线路布设Printed wire layout4布设总图Master drawing5可制造性设计Design-for-manufacturability6计算机辅助设计Computer-aided design(cad)7计算机辅助制造Computer-aided manufacturability(cim) 8计算机集成制造Computer integrat manufacturing 9计算机辅助工程Computer-aided engineering(cae) 10计算机辅助测试Computer-aided test (cat)11电子设计自动化Electric design automaton(eda) 12工程设计自动化Engineering design automaton(eda2) 13组装设计自动化Assemnly aided architecturaldesign(aaad) 14计算机辅助制图Computer aided drawing15计算机控制显示Computer controlled display(ccd) 16布局placement17布线routing18布图设计layout19重布rerouting20模拟simulation21逻辑模拟Logic simulation22电路模拟Circit simulate23时序模拟Timing simulation24模块化modularization25布线完成率Layout effeciency26机器描述格式Machine descriptionm format(mdf) 27机器描述格式数据库Mdf database28设计数据库Design database29设计原点Design origin30优化（设计）Optimization(design)31供设计优化坐标轴Predominant axis32表格原点Table origin33镜像Mirroring34驱动文件Drive file35中间文件Intermediate file36制造文件Manufacturing documentation 37队列支撑数据库Queue support database38元件安置component positioning 39图形显示Graphics display40比例因子Scaling factor41扫描填充Scan filling42矩形填充Rectangle filling43填充域Region filling44实体设计Physical design45逻辑设计Logic design46逻辑电路Logic design47层次设计Hierarchical design48自顶向下设计Top-down design49自顶向上设计Bottom-up design50线网net51数字化digitzing52设计规则检查Design rule checking53走（布）线路Router(cad)54网络表Net list55计算机辅助电路分析Computer-aided circuit analysis 56子线网Subnet57目标函数Objective function58设计后处理Post design processing(pdp) 59交互式制图设计Interactive drawing design 60费用矩阵Cost metrix61工程图Engineering drawing62方块框图Block diagram63迷宫Moze64元件密度Component density65巡回售货员问题Traveling salesman problem 66自由度Degrees freedom67入度Out going degree68出度Incoming degree69曼哈顿距离Manhatton distance70欧几里德距离Euclidean distance71网络Network72阵列Array73段Segment74逻辑Logic75逻辑设计自动化Logic design automation 76分线Separated time77分层Separated layer78定顺序Definite sequence79对准度registration80孔环Annular ring81公差Tolerance82同心Concentricity83样片coupon84变色discolorations85污点Stains86试样Specimen 87钻孔Drilling88剪裁Shearing 89切外型Routing90刮线Scoring91倒角Chamfering 92切空Blanking 93适应性suitability 94板弯Bow95板扭Twist96应力Stress97防焊膜Solder mask 98阻焊膜Solder resist 99文字标记Legend 100版本代字Revision letter 101料号Part No 102跳漏Skipping 103浮空Soda strawing 104流动Flow 105整平Leveling 106FPR First pass yield ‘。
PCB专业用语中英文对照
!一、综合词汇.eda365.& m% D" Z4 O0 _6 l/ y1 }( C4 R41、印制电路：printed circuit2、印制线路：printed wiring PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计. p& Q6 n: g- S e2 C3、印制板：printed board4、印制板电路：printed circuit board (pcb).eda365.2 a* Z0 H8 t6 q5、印制线路板：printed wiring board(pwb)EDA365高速PCB论坛]. M5 I3 *, v8 O6、印制元件：printed ponent7 I f6 j! A6 C5 J7、印制接点：printed contact8、印制板装配：printed board assembly EDA365高速PCB论坛* [2 a& {0 J$ R9 M; l9、板：board10、单面印制板：single-sided printed board(ssb)11、双面印制板：double-sided printed board(dsb)12、多层印制板：mulitlayer printed board(mlb)13、多层印制电路板：mulitlayer printed circuit board.eda365.* "% G; n' g6 G0 k!14、多层印制线路板：mulitlayer prited wiring board15、刚性印制板：rigid printed board16、刚性单面印制板：rigid single-sided printed borad17、刚性双面印制板：rigid double-sided printed borad PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计: i1 I; z5 }$ z* L18、刚性多层印制板：rigid multilayer printed board19、挠性多层印制板：fle*ible multilayer printed board PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计$ Y* V$ y- f, S1 R: h* *% T20、挠性印制板：fle*ible printed board21、挠性单面印制板：fle*ible single-sided printed board.eda365. Z* ", y/ z8 e J/ a+ s* M22、挠性双面印制板：fle*ible double-sided printed board5 j' E, H% r4 G- M* G. R* z23、挠性印制电路：fle*ible printed circuit (fpc)24、挠性印制线路：fle*ible printed wiring EDA365高速PCB论坛2 n& L7 [5 T- S6 _7 U) j5 I+ r25、刚性印制板：fle*-rigid printed board, rigid-fle* printed * Q, r7 O* r/ P5 W+ *9 p9 ]9 k: Iboard EDA365高速PCB论坛0 f! ~1 Q: Q* k( H8 V26、刚性双面印制板：fle*-rigid double-sided printed board, PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计6 J3 Y B* T" d4 B( F*rigid-fle* double-sided printed PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计' f* i5 I8 m- P* A0 C27、刚性多层印制板：fle*-rigid multilayer printed board, PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计" t- }9 F* y' b* B/ f& d4 ~rigid-fle* multilayer printed board PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计9 {1 ~9 v2 u1 m28、齐平印制板：flush printed board PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计; `- O, $ E" h$ "* f29、金属芯印制板：metal core printed board30、金属基印制板：metal base printed board PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计5 \9 \( S2 ~0 _+ D3 c* H8 l* w! c31、多重布线印制板：mulit-wiring printed board% M: q8 O% B6 Y/ H" F5 b!32、瓷印制板：ceramic substrate printed board PCB设计论坛，PCB l ayout设计，高速PCB设计，高速SI仿真设计& Z! T2 p0 S0 g' y$ g: q+ ]33、导电胶印制板：electroconductive paste printed board PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计8 R( [: H6 F- V+ L34、模塑电路板：molded circuit board35、模压印制板：stamped printed wiring board.eda365., h! ' g" F/ ]8 Q5 w7 i, Q4 j- \6 c36、顺序层压多层印制板：sequentially-laminated mulitlayer37、散线印制板：discrete wiring board38、微线印制板：micro wire board39、积层印制板：buile-up printed board40、积层多层印制板：build-up mulitlayer printed board (bum)41、积层挠印制板：build-up fle*ible printed board.eda365.+ q) b6 z; v1 ^6 n42、外表层合电路板：surface laminar circuit (slc)PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计; I" U% p! z6 l% `3 h/ p5 ^43、埋入凸块连印制板：b2it printed board44、多层膜基板：multi-layered film substrate(mfs)EDA365高速PCB论坛o. T$ $ 1 K2 J8 E) {- U45、层间全导通多层印制板：alivh multilayer printed board PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计- N% `: q, R9 h! f5 l% _46、载芯片板：chip on board (cob)47、埋电阻板：buried resistance board48、母板：mother board49、子板：daughter board50、背板：backplane EDA365高速PCB论坛+ K3 ^, s+ O8 J* P1 V( P$ [51、裸板：bare board PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计O5 _/ F% t$ V( ~5 i- d/ N3 D( i52、键盘板夹心板：copper-invar-copper board53、动态挠性板：dynamic fle* board PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计6 o) v. [' |8 T' a9 |54、静态挠性板：static fle* board55、可断拼板：break-away planel56、电缆：cable3 e+ t% [" n. T t7 o5 n7 N57、挠性扁平电缆：fle*ible flat cable (ffc)PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计* q M9 V F- F/ O$ W5 H* O4 [7 H% H58、薄膜开关：membrane switch59、混合电路：hybrid circuit.eda365.+ _% ]/ h$ [. [0 A' n60、厚膜：thick film PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计% A: ]: O6 C5 O2 N1 m3 o61、厚膜电路：thick film circuit4 v _! c8 |9 _9 O7 J: u, J" m62、薄膜：thin film EDA365高速PCB论坛) F/ ], P; w *' k63、薄膜混合电路：thin film hybrid circuit PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计- T* K& m& f- Y$ ") A264、互连：interconnection65、导线：conductor trace line66、齐平导线：flush conductor PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计8 O, i) u" *! |; J. S* A67、传输线：transmission line EDA365高速PCB论坛9 *4 I, h, a& "% d. h, F" [68、跨交：crossover PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计w! }: o& M% |6 }5 N69、板边插头：edge-board contact EDA365高速PCB论坛*$ _5 G; " W. A( C* P70、增强板：stiffener PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计& v/ E+ f* Z" H* *. C71、基底：substrate PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计- C* h; *- L' _6 r72、基板面：real estate PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计*/ }2 z! B3 R( `/ O73、导线面：conductor side PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计6 ~1 M \$ e) G- H74、元件面：ponent side75、焊接面：solder side76、印制：printing PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计c: q( f5 `- {; g' B)77、网格：grid PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计, z* F+ f: G5 H+ H6 U; _78、图形：pattern.eda365.7 l& r1 y' z8 h( b. *3 H* i% w79、导电图形：conductive pattern PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计) ** C, A. Z+ j c;80、非导电图形：non-conductive pattern81、字符：legend82、标志：mark二、基材：1、基材：base material2、层压板：laminate3、覆金属箔基材：metal-clad bade material4、覆铜箔层压板：copper-clad laminate (ccl)PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计6 j7 }- E* Y- n5 R$ u5、单面覆铜箔层压板：single-sided copper-clad laminate6、双面覆铜箔层压板：double-sided copper-clad laminate EDA365高速PCB论坛6 ~4 Y0 R6 p. `5 Z( q9 o* J: A7、复合层压板：posite laminate PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计: g1 ^; W7 e8 ]- n+ h' U! h8、薄层压板：thin laminate.eda365.8 y3 g$ [! Z; f* h9、金属芯覆铜箔层压板：metal core copper-clad laminate10、金属基覆铜层压板：metal base copper-clad laminate PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计E7 q k5 \! Y-11、挠性覆铜箔绝缘薄膜：fle*ible copper-clad dielectric film12、基体材料：basis material13、预浸材料：prepreg14、粘结片：bonding sheet PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计; K; [% {) A7 u* U- W( K15、预浸粘结片：preimpregnated bonding sheer16、环氧玻璃基板：epo*y glass substrate PCB设计论坛，PCB layou设计，高速PCB设计，高速仿真设计8 Y$ u6 "- J7 M- Z/ |:17、加成法用层压板：laminate for additive process.eda365.$ u' W V' o/ ^2 g18、预制层覆箔板：mass lamination panel PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计. e% I* u3 E% w19、层芯板：core material20、催化板材：catalyzed board ,coated catalyzed laminate PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计* D+ o2 ^* D( \" M1 L! n/ W21、涂胶催化层压板：adhesive-coated catalyzed laminate22、涂胶无催层压板：adhesive-coated uncatalyzed laminate23、粘结层：bonding layer PCB设计论坛，PCB l ayout设计，高速PCB设计，高速SI仿真设计7 h! V4 ^7 C6 g$24、粘结膜：film adhesive PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计) "& Q9 W( v+ O/ S8 R7 T3 w0 W25、涂胶粘剂绝缘薄膜：adhesive coated dielectric film26、无支撑胶粘剂膜：unsupported adhesive film EDA365高速PCB论坛0 D- P2 I: E5 M2 i* n27、覆盖层：cover layer (cover lay)28、增强板材：stiffener material29、铜箔面：copper-clad surface30、去铜箔面：foil removal surface31、层压板面：unclad laminate surface PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计; A2 s _7 M( W0 c2 i)32、基膜面：base film surface33、胶粘剂面：adhesive faec34、原始光洁面：plate finish35、粗面：matt finish 2 q; n1 F7 b! d* z$ k, v36、纵向：length wise direction PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计3 M& U& }! l' [/ R37、模向：cross wise direction38、剪切板：cut to size panel39、酚醛纸质覆铜箔板：phenolic cellulose paper copper-clad 6 "& B, I: t2 p8 k* slaminates(phenolic/paper ccl)PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计7 q6 H t+ _7 P9 |40、环氧纸质覆铜箔板：epo*ide cellulose paper copper-cladlaminates (epo*y/paper ccl)41、环氧玻璃布基覆铜箔板：epo*ide woven glass fabric copper-clad PCB设计论坛，PCB l ayout设计，高速PCB设计，高速SI仿真设计, o: t+ i4 M2 P" g/ Z3 ~ laminates42、环氧玻璃布纸复合覆铜箔板：epo*ide cellulose paper core, glass PCB设计论坛，PCB l ayout设计，高速PCB设计，高速SI仿真设计& A* W- q: Z4 B& o6 v4 |4 L6 o! v cloth surfaces copper-clad laminates7 b, W5 h" P,43、环氧玻璃布玻璃纤维复合覆铜箔板：epo*ide non woven/woven glass reinforced copper-clad laminates44、聚酯玻璃布覆铜箔板：ployester woven glass fabric copper-clad laminates.eda365." C% C Y. D4 B! I" y45、聚酰亚胺玻璃布覆铜箔板：polyimide woven glass fabric copper-clad 8 w5 Z$ "4 N) N: C0 ~9 H' K2 j laminates: V( *: O! v* z5 }46、双马来酰亚胺三嗪环氧玻璃布覆铜箔板：bismaleimide/triazine/epo*ide woven glass fabric copper-clad lamimates PCB设计论坛，PCB l ayout设计，高速PCB设计，高速SI仿真设计, B9 W) "7 w2 s: y47、环氧合成纤维布覆铜箔板：epo*ide synthetic fiber fabric copper-clad laminates48、聚四乙烯玻璃纤维覆铜箔板：teflon/fiber glass copper-clad laminates PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计6 ^2 \$ b {) u- B4 S5 E6 h( l49、超薄型层压板：ultra thin laminate50、瓷基覆铜箔板：ceramics base copper-clad laminates5 R" ". d* *& { o$ L2 \1 v51、紫外线阻挡型覆铜箔板：uv blocking copper-clad laminates三、基材的材料, `( `* I% H8 _" g+ H1、a阶树脂：a-stage resin.eda365.4 r* K; C. t: R! K; b2、b阶树脂：b-stage resin3、c阶树脂：c-stage resin4、环氧树脂：epo*y resin PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计8 Q, w5 N0 i; I" "* `. e% D5、酚醛树脂：phenolic resin6、聚酯树脂：polyester resin1 l; E! |" k0 ^4 E7、聚酰亚胺树脂：polyimide resin: D) _2 k& o, i$ k5 n7 *$ o8、双马来酰亚胺三嗪树脂：bismaleimide-triazine resin9、丙烯酸树脂：acrylic resin PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计 J' P3 `. F+ F6 Y: d2 e+ d- d* ^! k10、三聚氰胺甲醛树脂：melamine formaldehyde resin11、多官能环氧树脂：polyfunctional epo*y resin12、溴化环氧树脂：brominated epo*y resin13、环氧酚醛：epo*y novolac14、氟树脂：fluroresin PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计2 E2 f0 A: S6 *1 }$ j& T15、硅树脂：silicone resin16、硅烷：silane PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计* k4 ^' t2 [% ~( O17、聚合物：polymer18、无定形聚合物：amorphous polymer EDA365高速PCB论坛1 H6 w7 m* P8 Y19、结晶现象：crystalline polamer20、双晶现象：dimorphism21、共聚物：copolymer22、合成树脂：synthetic23、热固性树脂：thermosetting resin24、热塑性树脂：thermoplastic resin.eda365.) H0 d V$ g* T425、感光性树脂：photosensitive resin PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计1 \. o3 S* c+ \9 O0 `4 E7 J26、环氧当量：weight per epo*y equivalent (wpe)PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计1 K. m! *& ]3 P8 *. ~* h7 d' P27、环氧值：epo*y value28、双氰胺：dicyandiamide29、粘结剂：binder30、胶粘剂：adesive% n2 S- k' H( \5 i31、固化剂：curing agent32、阻燃剂：flame retardant PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计7 a5 B* g2 C* w" K33、遮光剂：opaquer34、增塑剂：plasticizers35、不饱和聚酯：unsatuiated polyester PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计8 j- A" ]" L' z536、聚酯薄膜：polyester/ i A6 P v8 _6 F6 j37、聚酰亚胺薄膜：polyimide film (pi)EDA365高速PCB论坛/ ^) ", E5 ]6 Z, * j8 "- Q38、聚四氟乙烯：polytetrafluoetylene (ptfe)39、聚全氟乙烯丙烯薄膜：perfluorinated ethylene-propylene copolymer film (fep)40、增强材料：reinforcing material41、玻璃纤维：glass fiber.eda365.' s" ^3 *% B5 L$ i w* `42、e玻璃纤维：e-glass fibre43、d玻璃纤维：d-glass fibre44、s玻璃纤维：s-glass fibre45、玻璃布：glass fabric46、非织布：non-woven fabric47、玻璃纤维垫：glass mats7 d3 D3 *6 f0 J6 N- |5 \48、纱线：yarn49、单丝：filament50、绞股：strand4 _! I" \* r) t; O. Y51、纬纱：weft yarn52、经纱：warp yarn EDA365高速PCB论坛) l$ l0 W) n6 ^4 b `0 D9 {' |53、但尼尔：denier PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计7 U* z: V U+ B c54、经向：warp-wise55、纬向：weft-wise, filling-wise56、织物经纬密度：thread count PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计4 t) L% G2 H8 D$ F+ H9 e57、织物组织：weave structure58、平纹组织：plain structure59、坏布：grey fabric% N4 V! f* I6 *8 p- e2 g& h6 _60、稀松织物：woven scrim) W, * y! *2 H, p( R61、弓纬：bow of weave62、断经：end missing63、缺纬：mis-picks64、纬斜：bias PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计n% e% r2 k0 "% C!65、折痕：crease66、云织：waviness PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计6 q: I1 *5 Y( s. R! p! `3 J* m! R& o67、鱼眼：fish eye68、毛圈长：feather length69、厚薄段：mark PCB设计论坛，CB layout设计，高速PCB设计，高速SI仿真设计6 *' H2 y2 [770、裂缝：split PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计. o; M/ s2 n% e,71、捻度：twist of yarn* A4 t- y$ _& R- z- f* ~72、浸润剂含量：size content73、浸润剂残留量：size residue74、处理剂含量：finish level+ r" G. F6 P: f: h2 y75、浸润剂：size EDA365高速PCB论坛; }! P+ d( s! m" I* F1 D2 Z" *4 L8 r76、偶联剂：couplint agent PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计' v9 S* G4 d: `1 t8 L6 v77、处理织物：finished fabric78、聚酰胺纤维：polyarmide fiber79、聚酯纤维非织布：non-woven polyester fabric PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计/ b( y6 "6 |0 J, h+ o& i1 o) M80、浸渍绝缘纵纸：impregnating insulation paper81、聚芳酰胺纤维纸：aromatic polyamide paper.eda365.0 f6 & t2 n% H% F% Z( ^5 m82、断裂长：breaking length PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计 C9 P0 _0 `+ H* + v/ P83、吸水高度：height of capillary rise84、湿强度保存率：wet strength retention.eda365., w/ m1 y( O% ** n; [2 m2 i& N185、白度：whitenness) S6 F. ** m2 S* \9 m)86、瓷：ceramics PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计2 h3 D, E' J7 M- v87、导电箔：conductive foil88、铜箔：copper foil PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计/ "9 |* u" e- y2 N$ I9 s: R89、电解铜箔：electrodeposited copper foil (ed copper foil)90、压延铜箔：rolled copper foil91、退火铜箔：annealed copper foil.eda365. ~! *& A1 M1 O6 O2 W92、压延退火铜箔：rolled annealed copper foil (ra copper foil) L* V" ~+ K/ k9 b; \. y93、薄铜箔：thin copper foil .eda365.: Y, q; C- "6 S/ o94、涂胶铜箔：adhesive coated foil EDA365高速PCB论坛$ K* R% \! k! T( q3 t% G+ [4 P) v95、涂胶脂铜箔：resin coated copper foil (rcc)EDA365高速PCB论坛* T Q, o0 k2 o5 */ O"96、复合金属箔：posite metallic material.eda365." E5 t/ r4 w/ N& c" F0 Z97、载体箔：carrier foil.eda365.$ H. o; s) }' \0 P: G98、殷瓦：invar99、箔〔剖面〕轮廓：foil profile100、光面：shiny side PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计 d3 \+ s" H5 C. *6 s7 {101、粗糙面：matte side PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计0 e7 n9 h0 M/ A* I, f* ^*102、处理面：treated side PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计: Z, R, g+ c* s6 f+ \103、防锈处理：stain proofing104、双面处理铜箔：double treated foil EDA365高速PCB论坛+ E8 Z& A J5 m7 j四、设计1、原理图：shematic diagram2、逻辑图：logic diagram PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计/ I9 q+ S' V: ]$ j3、印制线路布设：printed wire layout4、布设总图：master drawing PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计8 y0 K/ [* E' P5、可制造性设计：design-for-manufacturability PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计0 _. v5 Y/ ** B- `' k6、计算机辅助设计：puter-aided design.(cad)7、计算机辅助制造：puter-aided manufacturing.(cam)8、计算机集成制造：puter integrat manufacturing.(cim).eda365.- b9 ^8 *- q1 L9 h j9 *, S9、计算机辅助工程：puter-aided engineering.(cae).eda365.$ m* H* u3 t B; a9 Q& g*10、计算机辅助测试：puter-aided test.(cat): a: \2 {% M% |! *4 ~2 n/ j6 O11、电子设计自动化：electric design automation .(eda)12、工程设计自动化：engineering design automaton .(eda2)13、组装设计自动化：assembly aided architectural design. (aaad)& K* Z: Z! B" M. q J0 ]$ |14、计算机辅助制图：puter aided drawing PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计* s; k7 q0 R( W7 R/ V2 ^: F15、计算机控制显示：puter controlled display .(ccd)16、布局：placement17、布线：routing18、布图设计：layout19、重布：rerouting20、模拟：simulation21、逻辑模拟：logic simulation7 v& ~* g7 P& w* f0 R; ^22、电路模拟：circit simulation23、时序模拟：timing simulation24、模块化：modularization PCB设计论坛，PCB l ayout设计，高速PCB设计，高速SI仿真设计* r2 h9 K% y! k25、布线完成率：layout effeciency PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计 j0 c2 d7 ]9 T526、机器描述格式：machine descriptionm format .(mdf)27、机器描述格式数据库：mdf databse28、设计数据库：design database29、设计原点：design origin EDA365高速PCB论坛1 w- s* C: } j& l30、优化〔设计〕：optimization (design)PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计0 _3 e3 |. Q n( V. Q" V$ O2 Z0 J31、供设计优化坐标轴：predominant a*is32、表格原点：table origin33、镜像：mirroring34、驱动文件：drive file.eda365.: y+ W0 L8 *7 V* ] `" D35、中间文件：intermediate file/ F3 `$ H7 G H) I+ D36、制造文件：manufacturing documentation PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计" b* p6 U' g% R* H$ e( k$ ^37、队列支撑数据库：queue support database- ^: y( "+ Y* q0 O5 z( C38、元件安置：ponent positioning39、图形显示：graphics dispaly EDA365高速PCB论坛2 ( Y' W! C7 `40、比例因子：scaling factor EDA365高速PCB论坛N+ G9 ~; c7 g! * \41、扫描填充：scan filling PCB设计论坛，PCB layou设计，高速PCB设计，高速仿真设计- r2 R% *2 F2 N3 G4 "4 e0 E$ D42、矩形填充：rectangle filling.eda365.$ }) t3 V- s, |4 v2 F& {; v+ t43、填充域：region filling44、实体设计：physical design45、逻辑设计：logic design46、逻辑电路：logic circuit47、层次设计：hierarchical design PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计2 j% o* R2 q. ]4 G4 M* o7 a+ Q48、自顶向下设计：top-down design! W8 r8 T) ". G; W' }49、自底向上设计：bottom-up design EDA365高速PCB论坛3 L+ D$ E2 }9 c50、线网：net51、数字化：digitzing EDA365高速PCB论坛* l Q8 _) T2 f52、设计规那么检查：design rule checking PCB设计论坛，PCB l ayout设计，高速PCB设计，高速SI仿真设计/ I- O/ p) R9 R53、走〔布〕线器：router (cad)54、网络表：net list PC设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计; R8 z6 u9 ]. k8 I, v* r55、计算机辅助电路分析：puter-aided circuit analysis56、子线网：subnet PC设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计' v4 v/ o% E"57、目标函数：objective function PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计* u4 o; G8 c+ N! "* S+ j"58、设计后处理：post design processing (pdp)' ) ^4 e" B, o) }) A& "* M59、交互式制图设计：interactive drawing design PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计3 a9 }: A$ o" h% h' R8 b* M7 l60、费用矩阵：cost metri*PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计" j! D: p) "* g4 I+ P61、工程图：engineering drawing62、方块框图：block diagram63、迷宫：moze64、元件密度：ponent density65、巡回售货员问题：traveling salesman problem.eda365./ M/ R% h2 u! B' |66、自由度：degrees freedom PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计9 q9 p3 }; g) O0 ") }8 G* F% p2 v67、入度：out going degree EDA365高速PCB论坛: l! a3 7 K% w% D8 t* Y68、出度：ining degree PCB设计论坛，PCB layou设计，高速PCB设计，高速仿真设计- `1 n6 i' l4 Y% ~ b* D* M }69、曼哈顿距离：manhatton distance" U- r7 r Z0 V5 l: "7 a70、欧几里德距离：euclidean distance PCB设计论坛，PCB layou设计，高速PCB设计，高速仿真设计1 c1 a5 S* Q' F, e0 B2 G71、网络：network72、阵列：array73、段：segment EDA365高速PCB论坛c6 B0 [& n- O; U74、逻辑：logic75、逻辑设计自动化：logic design automation .eda365.7 v O' S: Q8 q0 N) `( `: j76、分线：separated time PCB设计论坛，PCB l ayout设计，高速PCB设计，高速SI仿真设计9 Y& A. a1 G6 G/ R* o77、分层：separated layer EDA365高速PCB论坛5 M4 y) O- d2 `& p8 Q/ N% }+ [(78、定顺序：definite sequence EDA365高速PCB论坛& o) o4 R7 E( t6 V: *五、形状与尺寸：EDA365高速PCB论坛B1 H* d0 ]8 r1、导线〔通道〕：conduction (track)PCB设计论坛，PCB l ayout设计，高速PCB设计，高速SI仿真设计; d2 |; l; _3 p4 ^2 y8 B72、导线〔体〕宽度：conductor width3、导线距离：conductor spacing4、导线层：conductor layer5、导线宽度/间距：conductor line/space$ *2 s. D1 M2 _" T6 h6 T6、第一导线层：conductor layer no.1PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计E! b3 h. E3 ** P*7、圆形盘：round pad8、方形盘：square pad7 E0 S* A* *1 q3 h9、菱形盘：diamond pad.eda365. ~9 O+ O7 r0 _8 n( E10、长方形焊盘：oblong pad EDA365高速PCB论坛! ^0 Y' h3 O/ C6 F5 n" Z11、子弹形盘：bullet pad PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计5 n, u7 r" N! D! ".12、泪滴盘：teardrop pad4 G. h' s- "" g! ~13、雪人盘：snowman pad14、v形盘：v-shaped pad& |1 U. n. ~& T( *; *- K) I; N'15、环形盘：annular pad16、非圆形盘：non-circular pad17、隔离盘：isolation pad18、非功能连接盘：monfunctional pad19、偏置连接盘：offset land20、腹〔背〕裸盘：back-bard land PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计+ K: R6 *7 k f/ ] N; b21、盘址：anchoring spaur22、连接盘图形：land pattern.eda365.% c& V* }6 O" K! E) N: R4 d23、连接盘网格阵列：land grid array.eda365.8 z) D- }' j) t h7 g. .24、孔环：annular ring PCB设计论坛，PCB layout设计，高速PCB设计，高速SI仿真设计+ \1 u5 S, r5 n2 \$ k- i4 b25、元件孔：ponent hole EDA365高速PCB论坛; {/ ^* n! i; z26、安装孔：mounting hole EDA365高速PCB论坛$ _+ u) A- 5 J( W7 ]27、支撑孔：supported hole28、非支撑孔：unsupported hole PCB设计论坛，PCB l ayout设计，高速PCB设计，高速SI仿真设计/ }4 K$ `7 w, n; ~9 a0 N" `;29、导通孔：via30、镀通孔：plated through hole (pth)* d9 n: q! W( |6 |& A* ^8 p31、余隙孔：access hole32、盲孔：blind via (hole).eda365." M- g6 ]0 w* h8 W( Z0 I: A4 "33、埋孔：buried via hole PCB设计论坛，PCB l ayou设计，高速PCB设计，高速SI仿真设计1 U+ Q( M$ u, [34、埋/盲孔：buried /blind via PCB设计论坛，PCB layou设计，高速PCB设计，高速SI仿真设计& l0 h' n+ I5 p$ * s, H,35、任意层部导通孔：any layer inner via hole (alivh)36、全部钻孔：all drilled hole37、定位孔：toaling hole38、无连接盘孔：landless hole39、中间孔：interstitial hole40、无连接盘导通孔：landless via hole.eda365." ) J* a3 O1 r41、引导孔：pilot hole42、端接全隙孔：terminal clearomee hole43、准外表间镀覆孔：quasi-interfacing plated-through hole44、准尺寸孔：dimensioned hole.eda365.. O: y& V6 p! C0 Z45、在连接盘中导通孔：via-in-pad.eda365.% f* h" \* h/46、孔位：hole location( \1 b" A3 P$ |/ T5 A) H47、孔密度：hole density PCB设计论坛，PCB layou设计，高速PCB设计，高速仿真设计9 p2 p( R; h/ ~ a* m$ D% g0 Q48、孔图：hole pattern- D2 h9 F$ y! {5 t- a* i49、钻孔图：drill drawing50、装配图：assembly drawing51、印制板组装图：printed board assembly drawing52、参考基准：datum referance. ! .。
pcb专业术语英文及翻译
pcb专业术语英文及翻译摘要：本文介绍了PCB（Printed Circuit Board，印刷电路板）专业术语的英文表达和翻译，根据内容实际需求分为三大类：PCB制造术语、PCB组装术语和PCB测试术语。
在每个类别下，将列举相关术语及其英文表达和翻译，从而帮助读者更好地理解和运用PCB专业术语。
正文：I. PCB制造术语1. 单、双面板 (Single-sided, Double-sided board)单面板：一种仅在板的一侧进行布线和元件安装的印刷电路板。
双面板：一种在两侧布线和元件安装的印刷电路板。
2. 环氧树脂 (Epoxy Resin)环氧树脂是一种常用的PCB基材，具有良好的绝缘性和耐热性。
3. 铜盖膜 (Copper Foil)铜盖膜是覆盖在印刷电路板表面的一层铜箔，用于电气连接。
4. 阻焊层 (Solder Mask Layer)阻焊层是一种覆盖在印刷电路板表面的保护层，用于防止元件的误焊。
5. 玻璃纤维布 (Glass Fiber Cloth)玻璃纤维布是PCB制造中一种常用的增强材料，用于提高印刷电路板的强度和耐磨性。
6. 焊盘 (Pad)焊盘是印刷电路板上用于连接元件引脚的焊接区域。
7. 过孔 (Through-hole)过孔是印刷电路板上贯穿两侧的孔洞，用于连接不同电子元器件。
8. 排针 (Pin Header)排针是一种插针式连接器，常用于将PCB与其他设备连接。
9. 焊接 (Soldering)焊接是将电子元件与印刷电路板焊接在一起的一种连接方法。
II. PCB组装术语1. 表面贴装技术 (Surface Mount Technology, SMT)表面贴装技术是一种将电子元件直接焊接在印刷电路板表面的组装方法。
2. 波峰焊接 (Wave Soldering)波峰焊接是一种通过将印刷电路板浸入焊锡浪涌中来实现电子元件的连接。
3. 焊接膏 (Solder Paste)焊接膏是表面贴装技术中使用的一种黏性材料，用于在印刷电路板上确定元件的位置并进行焊接。
PCB术语中英文对照
(Discrete Board) ——复线板，是指用极细的漆包线直接在无铜的板面上进行立体交叉的布线，在用胶固定及钻孔与镀孔后，得到多层互连的线路板，是美国PCK公司所开发。
这种MWB可节约设计时间，适用于复杂线路的少量机种。
Nail Heading ——钉头，由于钻孔的原因导致多层板的孔壁的内层线路张开。
Negative Etchbak ——内层铜箔向内凹陷。
Negative Pattern ——负片，在生产或客户菲林上，图像被制作成透明而其它的地方被制作成非透明。
Nick ——线路边的切口或缺口。
Nodle ——从表面突起的大的或小的块。
Nominal Cured Thickness ——多层板的厚度，或者多层板相邻层与层之间固化后的厚度。
Nonwetting——敷锡导致导体的表面露出。
Overlap ——钻尖点分离，正常的钻尖是有两个第一面和两个第二面，是长刃及凿刃为棱线组成金字塔形的四面共点，此单一点称为钻尖点，当翻磨不良时，可能会出现两个钻尖点，对刺入的定位不利，是钻咀的大缺点。
Pink ring ——粉红圈,由于内层铜的黑氧化层被化学处理掉，而导致在环绕电镀孔的内层出现粉红色的环状区域。
Plated ——在多层板的压合过程中，一种可以活动升降的平台。
Point ——是指钻头的尖部。
Point Angle ——钻尖角，是指钻咀的钻尖上，有两条棱线状的长刃所构成的夹角，称为“钻尖角”。
Polarizing Slot ——偏槽，见“Keying Slot”。
Porosity Test ——孔隙率测试，是对镀金层所做的试验。
Press－Fit Contact——指某些插孔式的镀金插脚，为了以后抽换方便便常不施以填焊连接，而是在孔径的严格控制下，是插入的接脚能做紧迫式的接触。
Press Plate ——钢板，用于多层板的压合。
Rack ——挂架，是板子在进行电镀或其它湿流程处理时，在溶液中用以临时固定板子的夹具。
中英文对照的PCB专业用语
一、综合词汇1、印制电路：printed circuit2、印制线路：printed wiring3、印制板：printed board4、印制板电路：printed circuit board (pcb)5、印制线路板：printed wiring board(pwb)6、印制元件：printed component7、印制接点：printed contact8、印制板装配：printed board assembly9、板：board10、单面印制板：single-sided printed board(ssb)11、双面印制板：double-sided printed board(dsb)12、多层印制板：mulitlay er printed board(mlb)13、多层印制电路板：mulitlay er printed circuit board14、多层印制线路板：mulitlay er prited wiring board15、刚性印制板：rigid printed board16、刚性单面印制板：rigid single-sided printed borad17、刚性双面印制板：rigid double-sided printed borad18、刚性多层印制板：rigid multilay er printed board19、挠性多层印制板：flexible multilay er printed board20、挠性印制板：flexible printed board21、挠性单面印制板：flexible single-sided printed board22、挠性双面印制板：flexible double-sided printed board23、挠性印制电路：flexible printed circuit (fpc)24、挠性印制线路：flexible printed wiring25、刚性印制板：flex-rigid printed board, rigid-flex printed board26、刚性双面印制板：flex-rigid double-sided printed board, rigid-flex double-sided printed27、刚性多层印制板：flex-rigid multilay er printed board, rigid-flex multilay er printed board28、齐平印制板：flush printed board29、金属芯印制板：metal core printed board30、金属基印制板：metal base printed board31、多重布线印制板：mulit-wiring printed board32、陶瓷印制板：ceramic substrate printed board33、导电胶印制板：electroconductive paste printed board34、模塑电路板：molded circuit board35、模压印制板：stamped printed wiring board36、顺序层压多层印制板：sequentially-laminated mulitlay er37、散线印制板：discrete wiring board38、微线印制板：micro wire board39、积层印制板：buile-up printed board40、积层多层印制板：build-up mulitlay er printed board (bum)41、积层挠印制板：build-up flexible printed board42、表面层合电路板：surface laminar circuit (slc)43、埋入凸块连印制板：b2it printed board44、多层膜基板：multi-lay ered film substrate(mfs)45、层间全内导通多层印制板：alivh multilay er printed board46、载芯片板：chip on board (cob)47、埋电阻板：buried resistance board48、母板：mother board49、子板：daughter board50、背板：backplane51、裸板：bare board52、键盘板夹心板：copper-invar-copper board53、动态挠性板：dynamic flex board54、静态挠性板：static flex board55、可断拼板：break-away planel56、电缆：cable57、挠性扁平电缆：flexible flat cable (ffc)58、薄膜开关：membrane switch59、混合电路：hybrid circuit60、厚膜：thick film61、厚膜电路：thick film circuit62、薄膜：thin film63、薄膜混合电路：thin film hybrid circuit64、互连：interconnection65、导线：conductor trace line66、齐平导线：flush conductor67、传输线：transmission line68、跨交：crossover69、板边插头：edge-board contact70、增强板：stiffener71、基底：substrate72、基板面：real estate73、导线面：conductor side74、元件面：component side75、焊接面：solder side76、印制：printing77、网格：grid78、图形：pattern79、导电图形：conductive pattern80、非导电图形：non-conductive pattern81、字符：legend82、标志：mark二、基材：1、基材：base material2、层压板：laminate3、覆金属箔基材：metal-clad bade material4、覆铜箔层压板：copper-clad laminate (ccl)5、单面覆铜箔层压板：single-sided copper-clad laminate6、双面覆铜箔层压板：double-sided copper-clad laminate7、复合层压板：composite laminate8、薄层压板：thin laminate9、金属芯覆铜箔层压板：metal core copper-clad laminate10、金属基覆铜层压板：metal base copper-clad laminate11、挠性覆铜箔绝缘薄膜：flexible copper-clad dielectric film12、基体材料：basis material13、预浸材料：prepreg14、粘结片：bonding sheet15、预浸粘结片：preimpregnated bonding sheer16、环氧玻璃基板：epoxy glass substrate17、加成法用层压板：laminate for additive process18、预制内层覆箔板：mass lamination panel19、内层芯板：core material20、催化板材：cataly zed board ,coated cataly zed laminate21、涂胶催化层压板：adhesive-coated catalyzed laminate22、涂胶无催层压板：adhesive-coated uncataly zed laminate23、粘结层：bonding lay er24、粘结膜：film adhesive25、涂胶粘剂绝缘薄膜：adhesive coated dielectric film26、无支撑胶粘剂膜：unsupported adhesive film27、覆盖层：cover lay er (cover lay)28、增强板材：stiffener material29、铜箔面：copper-clad surface30、去铜箔面：foil removal surface31、层压板面：unclad laminate surface32、基膜面：base film surface33、胶粘剂面：adhesive faec34、原始光洁面：plate finish35、粗面：matt finish36、纵向：length wise direction37、模向：cross wise direction38、剪切板：cut to size panel39、酚醛纸质覆铜箔板：phenolic cellulose paper copper-clad laminates(phenolic/paper ccl)40、环氧纸质覆铜箔板：epoxide cellulose paper copper-clad laminates (epoxy/paper ccl)41、环氧玻璃布基覆铜箔板：epoxide woven glass fabric copper-clad laminates42、环氧玻璃布纸复合覆铜箔板：epoxide cellulose paper core, glass cloth surfaces copper-clad laminates43、环氧玻璃布玻璃纤维复合覆铜箔板：epoxide non woven/woven glass reinforced copper-clad laminates44、聚酯玻璃布覆铜箔板：ploy ester woven glass fabric copper-clad laminates45、聚酰亚胺玻璃布覆铜箔板：poly imide woven glass fabric copper-clad laminates46、双马来酰亚胺三嗪环氧玻璃布覆铜箔板：bismaleimide/triazine/epoxide woven glass fabric copper-clad lamimates47、环氧合成纤维布覆铜箔板：epoxide synthetic fiber fabric copper-clad laminates48、聚四乙烯玻璃纤维覆铜箔板：teflon/fiber glass copper-clad laminates49、超薄型层压板：ultra thin laminate50、陶瓷基覆铜箔板：ceramics base copper-clad laminates51、紫外线阻挡型覆铜箔板：uv blocking copper-clad laminates三、基材的材料1、a阶树脂：a-stage resin2、b阶树脂：b-stage resin3、c阶树脂：c-stage resin4、环氧树脂：epoxy resin5、酚醛树脂：phenolic resin6、聚酯树脂：poly ester resin7、聚酰亚胺树脂：poly imide resin8、双马来酰亚胺三嗪树脂：bismaleimide-triazine resin9、丙烯酸树脂：acry lic resin10、三聚氰胺甲醛树脂：melamine formaldehyde resin11、多官能环氧树脂：polyfunctional epoxy resin12、溴化环氧树脂：brominated epoxy resin13、环氧酚醛：epoxy novolac14、氟树脂：fluroresin15、硅树脂：silicone resin16、硅烷：silane17、聚合物：polymer18、无定形聚合物：amorphous polymer19、结晶现象：crystalline polamer20、双晶现象：dimorphism21、共聚物：copolymer22、合成树脂：sy nthetic23、热固性树脂：thermosetting resin24、热塑性树脂：thermoplastic resin25、感光性树脂：photosensitive resin26、环氧当量：weight per epoxy equivalent (wpe)27、环氧值：epoxy value28、双氰胺：dicy andiamide29、粘结剂：binder30、胶粘剂：adesive31、固化剂：curing agent32、阻燃剂：flame retardant33、遮光剂：opaquer34、增塑剂：plasticizers35、不饱和聚酯：unsatuiated poly ester36、聚酯薄膜：poly ester37、聚酰亚胺薄膜：poly imide film (pi)38、聚四氟乙烯：polytetrafluoety lene (ptfe)39、聚全氟乙烯丙烯薄膜：perfluorinated ethy lene-propylene copolymer film (fep)40、增强材料：reinforcing material41、玻璃纤维：glass fiber42、e玻璃纤维：e-glass fibre43、d玻璃纤维：d-glass fibre44、s玻璃纤维：s-glass fibre45、玻璃布：glass fabric46、非织布：non-woven fabric47、玻璃纤维垫：glass mats48、纱线：yarn49、单丝：filament50、绞股：strand51、纬纱：weft y arn52、经纱：warp y arn53、但尼尔：denier54、经向：warp-wise55、纬向：weft-wise, filling-wise56、织物经纬密度：thread count57、织物组织：weave structure58、平纹组织：plain structure59、坏布：grey fabric60、稀松织物：woven scrim61、弓纬：bow of weave62、断经：end missing63、缺纬：mis-picks64、纬斜：bias65、折痕：crease66、云织：waviness67、鱼眼：fish ey e68、毛圈长：feather length69、厚薄段：mark70、裂缝：split71、捻度：twist of y arn72、浸润剂含量：size content73、浸润剂残留量：size residue74、处理剂含量：finish level75、浸润剂：size76、偶联剂：couplint agent77、处理织物：finished fabric78、聚酰胺纤维：poly armide fiber79、聚酯纤维非织布：non-woven poly ester fabric80、浸渍绝缘纵纸：impregnating insulation paper81、聚芳酰胺纤维纸：aromatic poly amide paper82、断裂长：breaking length83、吸水高度：height of capillary rise84、湿强度保留率：wet strength retention85、白度：whitenness86、陶瓷：ceramics87、导电箔：conductive foil88、铜箔：copper foil89、电解铜箔：electrodeposited copper foil (ed copper foil)90、压延铜箔：rolled copper foil91、退火铜箔：annealed copper foil92、压延退火铜箔：rolled annealed copper foil (ra copper foil)93、薄铜箔：thin copper foil94、涂胶铜箔：adhesive coated foil95、涂胶脂铜箔：resin coated copper foil (rcc)96、复合金属箔：composite metallic material97、载体箔：carrier foil98、殷瓦：invar99、箔（剖面）轮廓：foil profile100、光面：shiny side101、粗糙面：matte side102、处理面：treated side103、防锈处理：stain proofing104、双面处理铜箔：double treated foil四、设计1、原理图：shematic diagram2、逻辑图：logic diagram3、印制线路布设：printed wire lay out4、布设总图：master drawing5、可制造性设计：design-for-manufacturability6、计算机辅助设计：computer-aided design.(cad)7、计算机辅助制造：computer-aided manufacturing.(cam)8、计算机集成制造：computer integrat manufacturing.(cim)9、计算机辅助工程：computer-aided engineering.(cae)10、计算机辅助测试：computer-aided test.(cat)11、电子设计自动化：electric design automation .(eda)12、工程设计自动化：engineering design automaton .(eda2)13、组装设计自动化：assembly aided architectural design. (aaad)14、计算机辅助制图：computer aided drawing15、计算机控制显示：computer controlled display .(ccd)16、布局：placement17、布线：routing18、布图设计：lay out19、重布：rerouting20、模拟：simulation21、逻辑模拟：logic simulation22、电路模拟：circit simulation23、时序模拟：timing simulation24、模块化：modularization25、布线完成率：lay out effeciency26、机器描述格式：machine descriptionm format .(mdf)27、机器描述格式数据库：mdf databse28、设计数据库：design database29、设计原点：design origin30、优化（设计）：optimization (design)31、供设计优化坐标轴：predominant axis32、表格原点：table origin33、镜像：mirroring34、驱动文件：drive file35、中间文件：intermediate file36、制造文件：manufacturing documentation37、队列支撑数据库：queue support database38、元件安置：component positioning39、图形显示：graphics dispaly40、比例因子：scaling factor41、扫描填充：scan filling42、矩形填充：rectangle filling43、填充域：region filling44、实体设计：phy sical design45、逻辑设计：logic design46、逻辑电路：logic circuit47、层次设计：hierarchical design48、自顶向下设计：top-down design49、自底向上设计：bottom-up design50、线网：net51、数字化：digitzing52、设计规则检查：design rule checking53、走（布）线器：router (cad)54、网络表：net list55、计算机辅助电路分析：computer-aided circuit analysis56、子线网：subnet57、目标函数：objective function58、设计后处理：post design processing (pdp)59、交互式制图设计：interactive drawing design60、费用矩阵：cost metrix61、工程图：engineering drawing62、方块框图：block diagram63、迷宫：moze64、元件密度：component density65、巡回售货员问题：traveling salesman problem66、自由度：degrees freedom67、入度：out going degree68、出度：incoming degree69、曼哈顿距离：manhatton distance70、欧几里德距离：euclidean distance71、网络：network72、阵列：array73、段：segment74、逻辑：logic75、逻辑设计自动化：logic design automation76、分线：separated time77、分层：separated lay er78、定顺序：definite sequence五、形状与尺寸：1、导线（通道）：conduction (track)2、导线（体）宽度：conductor width3、导线距离：conductor spacing4、导线层：conductor lay er5、导线宽度/间距：conductor line/space6、第一导线层：conductor lay er no.17、圆形盘：round pad8、方形盘：square pad9、菱形盘：diamond pad10、长方形焊盘：oblong pad11、子弹形盘：bullet pad12、泪滴盘：teardrop pad13、雪人盘：snowman pad14、v形盘：v-shaped pad15、环形盘：annular pad16、非圆形盘：non-circular pad17、隔离盘：isolation pad18、非功能连接盘：monfunctional pad19、偏置连接盘：offset land20、腹（背）裸盘：back-bard land21、盘址：anchoring spaur22、连接盘图形：land pattern23、连接盘网格阵列：land grid array24、孔环：annular ring25、元件孔：component hole26、安装孔：mounting hole27、支撑孔：supported hole28、非支撑孔：unsupported hole29、导通孔：via30、镀通孔：plated through hole (pth)31、余隙孔：access hole32、盲孔：blind via (hole)33、埋孔：buried via hole34、埋/盲孔：buried /blind via35、任意层内部导通孔：any lay er inner via hole (alivh)36、全部钻孔：all drilled hole37、定位孔：toaling hole38、无连接盘孔：landless hole39、中间孔：interstitial hole40、无连接盘导通孔：landless via hole41、引导孔：pilot hole42、端接全隙孔：terminal clearomee hole43、准表面间镀覆孔：quasi-interfacing plated-through hole44、准尺寸孔：dimensioned hole45、在连接盘中导通孔：via-in-pad46、孔位：hole location47、孔密度：hole density48、孔图：hole pattern49、钻孔图：drill drawing50、装配图：assembly drawing51、印制板组装图：printed board assembly drawing52、参考基准：datum referance。
300个pcb线路板行业术语中英互译
1、印制电路：printed circuit2、印制线路：printed wiring3、印制板：printed board4、印制板电路：printed circuit board (pcb)5、印制线路板：printed wiring board(pwb)6、印制元件：printed component7、印制接点：printed contact8、印制板装配：printed board assembly9、板：board10、单面印制板：single-sided printed board(ssb)11、双面印制板：double-sided printed board(dsb)12、多层印制板：mulitlayer printed board(mlb)13、多层印制电路板：mulitlayer printed circuit board14、多层印制线路板：mulitlayer prited wiring board15、刚性印制板：rigid printed board16、刚性单面印制板：rigid single-sided printed borad17、刚性双面印制板：rigid double-sided printed borad18、刚性多层印制板：rigid multilayer printed board19、挠性多层印制板：flexible multilayer printed board20、挠性印制板：flexible printed board21、挠性单面印制板：flexible single-sided printed board22、挠性双面印制板：flexible double-sided printed board23、挠性印制电路：flexible printed circuit (fpc)24、挠性印制线路：flexible printed wiring25、刚性印制板：flex-rigid printed board, rigid-flex printed board26、刚性双面印制板：flex-rigid double-sided printed board, rigid-flex double-sided printed27、刚性多层印制板：flex-rigid multilayer printed board, rigid-flex multilayer printed board28、齐平印制板：flush printed board29、金属芯印制板：metal core printed board30、金属基印制板：metal base printed board31、多重布线印制板：mulit-wiring printed board32、陶瓷印制板：ceramic substrate printed board33、导电胶印制板：electroconductive paste printed board34、模塑电路板：molded circuit board35、模压印制板：stamped printed wiring board36、顺序层压多层印制板：sequentially-laminated multilayer37、散线印制板：discrete wiring board38、微线印制板：micro wire board39、积层印制板：buile-up printed board40、积层多层印制板：build-up mulitlayer printed board (bum)41、积层挠印制板：build-up flexible printed board42、表面层合电路板：surface laminar circuit (slc)43、埋入凸块连印制板：b2it printed board44、多层膜基板：multi-layered film substrate(mfs)45、层间全内导通多层印制板：alivh multilayer printed board46、载芯片板：chip on board (cob)47、埋电阻板：buried resistance board48、母板：mother board49、子板：daughter board50、背板：backplane51、裸板：bare board52、键盘板夹心板：copper-invar-copper board53、动态挠性板：dynamic flex board54、静态挠性板：static flex board55、可断拼板：break-away planel56、电缆：cable57、挠性扁平电缆：flexible flat cable (ffc)58、薄膜开关：membrane switch59、混合电路：hybrid circuit60、厚膜：thick film61、厚膜电路：thick film circuit62、薄膜：thin film63、薄膜混合电路：thin film hybrid circuit64、互连：interconnection65、导线：conductor trace line66、齐平导线：flush conductor67、传输线：transmission line68、跨交：crossover69、板边插头：edge-board contact70、增强板：stiffener71、基底：substrate72、基板面：real estate73、导线面：conductor side74、元件面：component side75、焊接面：solder side76、印制：printing77、网格：grid78、图形：pattern79、导电图形：conductive pattern80、非导电图形：non-conductive pattern81、字符：legend82、标志：mark83、方形扁平封装：QFP（Quad Flat Package）84、有引线塑料芯片栽体：PLCC（Plastic Leaded Chip Carrier）85、双列直插封装：DIP（Dual In-line Package）86、单列直插封装：SIP（Single inline Package）87、小外形封装：SOP（Small Out-Line Package）88、 J形引线小外形封装：SOJ（Small Out-Line J-Leaded Package）89、板上芯片封装：COB（Chip on Board）90、倒装焊芯片：Flip-Chip-----------------------一、综合词汇1、印制电路：printed circuit2、印制线路：printed wiring3、印制板：printed board4、印制板电路：printed circuit board (PCB)5、印制线路板：printed wiring board(PWB)6、印制元件：printed component7、印制接点：printed contact8、印制板装配：printed board assembly9、板：board10、单面印制板：single-sided printed board(SSB)11、双面印制板：double-sided printed board(DSB)12、多层印制板：mulitlayer printed board(MLB)13、多层印制电路板：mulitlayer printed circuit board14、多层印制线路板：mulitlayer prited wiring board15、刚性印制板：rigid printed board16、刚性单面印制板：rigid single-sided printed borad17、刚性双面印制板：rigid double-sided printed borad18、刚性多层印制板：rigid multilayer printed board19、挠性多层印制板：flexible multilayer printed board20、挠性印制板：flexible printed board21、挠性单面印制板：flexible single-sided printed board22、挠性双面印制板：flexible double-sided printed board23、挠性印制电路：flexible printed circuit (FPC)24、挠性印制线路：flexible printed wiring25、刚性印制板：flex-rigid printed board, rigid-flex printed board26、刚性双面印制板：flex-rigid double-sided printed board, rigid-flex double- sided printed27、刚性多层印制板：flex-rigid multilayer printed board, rigid-flex multilayerprinted board28、齐平印制板：flush printed board29、金属芯印制板：metal core printed board30、金属基印制板：metal base printed board31、多重布线印制板：mulit-wiring printed board32、陶瓷印制板：ceramic substrate printed board33、导电胶印制板：electroconductive paste printed board34、模塑电路板：molded circuit board35、模压印制板：stamped printed wiring board36、顺序层压多层印制板：sequentially-laminated mulitlayer37、散线印制板：discrete wiring board38、微线印制板：micro wire board39、积层印制板：buile-up printed board40、积层多层印制板：build-up mulitlayer printed board (BUM)41、积层挠印制板：build-up flexible printed board42、表面层合电路板：surface laminar circuit (SLC)43、埋入凸块连印制板：B2it printed board44、多层膜基板：multi-layered film substrate(MFS)45、层间全内导通多层印制板：ALIVH multilayer printed board46、载芯片板：chip on board (COB)47、埋电阻板：buried resistance board48、母板：mother board49、子板：daughter board50、背板：backplane51、裸板：bare board52、键盘板夹心板：copper-invar-copper board53、动态挠性板：dynamic flex board54、静态挠性板：static flex board55、可断拼板：break-away planel56、电缆：cable57、挠性扁平电缆：flexible flat cable (FFC)58、薄膜开关：membrane switch59、混合电路：hybrid circuit60、厚膜：thick film61、厚膜电路：thick film circuit62、薄膜：thin film63、薄膜混合电路：thin film hybrid circuit64、互连：interconnection65、导线：conductor trace line66、齐平导线：flush conductor67、传输线：transmission line68、跨交：crossover69、板边插头：edge-board contact70、增强板：stiffener71、基底：substrate72、基板面：real estate73、导线面：conductor side74、元件面：component side75、焊接面：solder side76、印制：printing77、网格：grid78、图形：pattern79、导电图形：conductive pattern80、非导电图形：non-conductive pattern81、字符：legend82、标志：mark二、基材：1、基材：base material2、层压板：laminate3、覆金属箔基材：metal-clad bade material4、覆铜箔层压板：copper-clad laminate (CCL)5、单面覆铜箔层压板：single-sided copper-clad laminate6、双面覆铜箔层压板：double-sided copper-clad laminate7、复合层压板：composite laminate8、薄层压板：thin laminate9、金属芯覆铜箔层压板：metal core copper-clad laminate10、金属基覆铜层压板：metal base copper-clad laminate11、挠性覆铜箔绝缘薄膜：flexible copper-clad dielectric film12、基体材料：basis material13、预浸材料：prepreg14、粘结片：bonding sheet15、预浸粘结片：preimpregnated bonding sheer16、环氧玻璃基板：epoxy glass substrate17、加成法用层压板：laminate for additive process18、预制内层覆箔板：mass lamination panel19、内层芯板：core material20、催化板材：catalyzed board ,coated catalyzed laminate21、涂胶催化层压板：adhesive-coated catalyzed laminate22、涂胶无催层压板：adhesive-coated uncatalyzed laminate23、粘结层：bonding layer24、粘结膜：film adhesive25、涂胶粘剂绝缘薄膜：adhesive coated dielectric film26、无支撑胶粘剂膜：unsupported adhesive film27、覆盖层：cover layer (cover lay)28、增强板材：stiffener material29、铜箔面：copper-clad surface30、去铜箔面：foil removal surface31、层压板面：unclad laminate surface32、基膜面：base film surface33、胶粘剂面：adhesive faec34、原始光洁面：plate finish35、粗面：matt finish36、纵向：length wise direction37、模向：cross wise direction38、剪切板：cut to size panel39、酚醛纸质覆铜箔板：phenolic cellulose paper copper-clad laminates (phenolic/paper CCL)40、环氧纸质覆铜箔板：epoxide cellulose paper copper-clad laminates(epoxy/paper CCL)41、环氧玻璃布基覆铜箔板：epoxide woven glass fabric copper-clad laminates42、环氧玻璃布纸复合覆铜箔板：epoxide cellulose paper core, glass cloth surfaces copper-clad laminates43、环氧玻璃布玻璃纤维复合覆铜箔板：epoxide non woven/woven glass reinforced copper-clad laminates44、聚酯玻璃布覆铜箔板：ployester woven glass fabric copper-clad laminates45、聚酰亚胺玻璃布覆铜箔板：polyimide woven glass fabric copper-clad laminates46、双马来酰亚胺三嗪环氧玻璃布覆铜箔板：bismaleimide/triazine/epoxide woven glass fabric copper-clad lamimates47、环氧合成纤维布覆铜箔板：epoxide synthetic fiber fabric copper-clad laminates48、聚四乙烯玻璃纤维覆铜箔板：teflon/fiber glass copper-clad laminates49、超薄型层压板：ultra thin laminate50、陶瓷基覆铜箔板：ceramics base copper-clad laminates51、紫外线阻挡型覆铜箔板：UV blocking copper-clad laminates三、基材的材料1、 A阶树脂：A-stage resin2、 B阶树脂：B-stage resin3、 C阶树脂：C-stage resin4、环氧树脂：epoxy resin5、酚醛树脂：phenolic resin6、聚酯树脂：polyester resin7、聚酰亚胺树脂：polyimide resin8、双马来酰亚胺三嗪树脂：bismaleimide-triazine resin9、丙烯酸树脂：acrylic resin10、三聚氰胺甲醛树脂：melamine formaldehyde resin11、多官能环氧树脂：polyfunctional epoxy resin12、溴化环氧树脂：brominated epoxy resin13、环氧酚醛：epoxy novolac14、氟树脂：fluroresin15、硅树脂：silicone resin16、硅烷：silane17、聚合物：polymer18、无定形聚合物：amorphous polymer19、结晶现象：crystalline polamer20、双晶现象：dimorphism21、共聚物：copolymer22、合成树脂：synthetic23、热固性树脂：thermosetting resin24、热塑性树脂：thermoplastic resin25、感光性树脂：photosensitive resin26、环氧当量：weight per epoxy equivalent (WPE)27、环氧值：epoxy value28、双氰胺：dicyandiamide29、粘结剂：binder30、胶粘剂：adesive31、固化剂：curing agent32、阻燃剂：flame retardant33、遮光剂：opaquer34、增塑剂：plasticizers35、不饱和聚酯：unsatuiated polyester36、聚酯薄膜：polyester37、聚酰亚胺薄膜：polyimide film (PI)38、聚四氟乙烯：polytetrafluoetylene (PTFE)39、聚全氟乙烯丙烯薄膜：perfluorinated ethylene-propylene copolymer film (FEP)40、增强材料：reinforcing material41、玻璃纤维：glass fiber42、 E玻璃纤维：E-glass fibre43、 D玻璃纤维：D-glass fibre44、 S玻璃纤维：S-glass fibre45、玻璃布：glass fabric46、非织布：non-woven fabric47、玻璃纤维垫：glass mats48、纱线：yarn49、单丝：filament50、绞股：strand51、纬纱：weft yarn52、经纱：warp yarn53、但尼尔：denier54、经向：warp-wise55、纬向：weft-wise, filling-wise56、织物经纬密度：thread count57、织物组织：weave structure58、平纹组织：plain structure59、坏布：grey fabric60、稀松织物：woven scrim61、弓纬：bow of weave62、断经：end missing63、缺纬：mis-picks64、纬斜：bias65、折痕：crease66、云织：waviness67、鱼眼：fish eye68、毛圈长：feather length69、厚薄段：mark70、裂缝：split71、捻度：twist of yarn72、浸润剂含量：size content73、浸润剂残留量：size residue74、处理剂含量：finish level75、浸润剂：size76、偶联剂：couplint agent77、处理织物：finished fabric78、聚酰胺纤维：polyarmide fiber79、聚酯纤维非织布：non-woven polyester fabric80、浸渍绝缘纵纸：impregnating insulation paper81、聚芳酰胺纤维纸：aromatic polyamide paper82、断裂长：breaking length83、吸水高度：height of capillary rise84、湿强度保留率：wet strength retention85、白度：whitenness86、陶瓷：ceramics87、导电箔：conductive foil88、铜箔：copper foil89、电解铜箔：electrodeposited copper foil (ED copper foil)90、压延铜箔：rolled copper foil91、退火铜箔：annealed copper foil92、压延退火铜箔：rolled annealed copper foil (RA copper foil)93、薄铜箔：thin copper foil94、涂胶铜箔：adhesive coated foil95、涂胶脂铜箔：resin coated copper foil (RCC)96、复合金属箔：composite metallic material97、载体箔：carrier foil98、殷瓦：invar99、箔（剖面）轮廓：foil profile100、光面：shiny side101、粗糙面：matte side102、处理面：treated side103、防锈处理：stain proofing104、双面处理铜箔：double treated foil四、设计1、原理图：shematic diagram2、逻辑图：logic diagram3、印制线路布设：printed wire layout4、布设总图：master drawing5、可制造性设计：design-for-manufacturability6、计算机辅助设计：computer-aided design.(CAD)7、计算机辅助制造：computer-aided manufacturing.(CAM)8、计算机集成制造：computer integrat manufacturing.(CIM)9、计算机辅助工程：computer-aided engineering.(CAE)。
PCB行业最常用术语之中英文对照
PCB行业最常用术语之中英文对照(按字母检索)A/W (artwork) 底片Ablation 烧溶(laser),切除abrade 粗化abrasion resistance 耐磨性absorption 吸收ACC ( accept ) 允收accelerated corrosion test 加速腐蚀accelerated test 加速试验acceleration 速化反应accelerator 加速剂acceptable 允收activator 活化液active work in process 实际在制品adhesion 附着力adhesive method 黏着法air inclusion 气泡air knife 风刀amorphous change 不定形的改变amount 总量amylnitrite 硝基戊烷analyzer 分析仪anneal 回火annular ring 环状垫圈;孔环anode slime (sludge) 阳极泥anodizing 阳极处理AOI ( automatic optical inspection ) 自动:光学检测applicable documents 引用之文件AQL sampling 允收水准抽样aqueous photoresist 液态光阻aspect ratio 纵横比(厚宽比)As received 到货时back lighting 背光back-up 垫板banked work in process 预留在制品base material 基材baseline performance 基准绩效batch 批beta backscattering 贝他射线照射法beveling 切斜边;斜边biaxial deformation 二方向之变形black-oxide 黑化blank controller 空白对照组blank panel 空板blanking 挖空blip 弹开blister 气泡;起泡blistering 气泡blow hole 吹孔board-thickness error 板厚错误bonding plies 黏结层bow ; bowing 板弯break out 从平环内破出bridging 搭桥;桥接BTO (Build To Order) 接单生产burning 烧焦burr 毛边(毛头)camcorder 一体型摄录放机carbide 碳化物carlson pin 定位梢carrier 载运剂catalyzing 催化catholic sputtering 阴极溅射法caul plate 隔板;钢板calibration system requirements 校验系统之各种要求center beam method 中心光束法central projection 集中式投射线certification 认证chamfer 倒角(金手指)chamfering 切斜边;倒角characteristic impedance 特性阻抗charge transfer overpotential 电量传递过电压chase 网框checkboard 棋盘chelator 蟹和剂chemical bond 化学键chemical vapor deposition 化学蒸着镀circumferential void 圆周性之孔破clad metal 包夹金属clean room 无尘室clearance 间隙coat 镀外表coating error 防焊覆盖错误coefficient of thermal expansion (CTE) 热澎胀系数cold solder joint 冷焊点cold-weld 金属粉末冷焊color 颜色color error 颜色错误compensation 补偿competitive performance 竞争力绩效complex salt 错化物complexor 错化物component hole 零件孔component side 零件面concentric 同心conformance 密贴性consumer products 消费性产品contact resistance 接触电阻continuous performance 连续发挥效能contract service 协力厂controlled split 均裂式conventional flow 乱流方式conventional tensile test 传统张力测试法conversion coating 转化层convex 突出coordinate list 数据清单copper claded laminates (CCL) 铜箔基板copper exposure 线路露铜copper mirror 镜铜copper pad 铜箔圆配copper residue (copper splash) 铜渣corrosion rate numbering 腐蚀速率计数系统corrosion resistance 抗蚀性coulombs law 库伦定律countersink 喇叭孔coupon 试样coupon location 试样点covering power 遮盖力CPU 中央处理器crack 破裂;裂痕crazing 裂痕;白斑cross linking 交联聚合cross talk 呼应作用crosslinking 交联crystal collection 结晶收集curing 聚合体current efficiency 电流效率cut-outs 挖空cutting 裁板cyanide 氰化物cycles of learning 学习循环cycle-time reduction 交期缩短date code 周期deburring 去毛头dedicated 专用型degradation 退变delamination 分层dent / pin hole 凹陷/ 针孔department of defense 国防部designation 字码简示法de-smear 除胶渣developing 显影dewetting 缩锡dewetting time 缩锡时间dimension error 外形尺寸错误dielectric constant 介质常数difficulty 困难度difunctional 双功能dimension 尺寸dimension stability 尺寸安定性dimensional stability 尺度安定性dimension and tolerance 尺寸与公差dirty hole 孔内异物discolor hole 孔黑;孔灰;氧化discoloration 变色disposable eyelet method 消耗性铆钉法distortion factor 尺寸变形函数double side 双面板downtime 停机时间drill 钻孔drill bit 钻头drill facet 钻尖切萷面drill pointer 钻尖重(研)磨机drilled blank board 已钻孔之裸板drilling 钻孔dry film 干膜ductility 延展性economy of scale 经济规模edge spacing 板边空地edge-board contact ( gold finger ) 金手指efficiency 能量效率electric test 电测electrical testing 电测;测试electrochemical machine ECM 电化学加工法electrochemical reactor 电化学反应器electroforming 电铸electroless plate 化学铜electroless-deposition 无电镀electropolishing 电解拋光electrorefining 电解精炼electrowinning 电解萃取elliptical set 椭圆形embrittlement 脆性entitlement performance 可达成绩效entrapment 电镀夹杂物epoxy 环氧树酯equipotential 电位线error data file 异常情形etch rate 蚀铜速率etchants 蚀刻液etchback 回蚀evaluation program 评估用程序exposure 曝光external pin method 外部插梢法eyelet hole 铆钉孔Eyeletting 铆眼fabric 网布failure 故障fast response 快速响应fault 瑕庛;缺陷fiber exposure 纤维显露fiber protrusion 纤维突出fiducial mark 光学点,基准记号filler 填充料film 底片filtration 过滤finished board 成品fixing 固着fixture 电测夹具(治具)flaking off 粹离flammability rating 燃性等级flare 喇叭形孔flat cable 并排电缆feedback loop 回馈循环first-in-first-out (FIFO) 先进先出flexible manufacturing system (FMS) 弹性制造系统flux 助焊剂foil distortion 铜层变形fold 空泡foreign include 异物foreign material 基材内异物free radical chain polymerization 自由基连锁聚合fully additive 加成法fully annealed type 彻底回火轫化之类形function 函数fundamental and basic 基本fungus resistance 抗霉性funnel flange 喇叭形折翼galvanized 加法尼化制程gap 钻尖分开gauge length 有效长度gel time 胶化时间general resist ink 一般阻剂油墨general 通论general industrial 一般性(电子)工业级geometrical levelling 几何平整glass transition temperature (Tg) 玻璃态转换温度Gold 金gold finger 金手指gold plating 镀金golden board 标准板gouges 刷磨凹沟gouging 挖破grain boundary 金属晶体之四边green 绿色grip 夹头ground plane 接地层ground plane clearance 接地空环hackers 骇客HAL ( hot air leveling ) 喷锡haloing 白边;白圈hardener 硬化剂hardness 硬度hepa filter 空气滤清器high performance industrial 高性能(电子)工业级high reliability 高可靠度high resolution 高分辨率high temperature elongation (HTE) 高温延展性铜箔high temperature epoxy (HTE) 高温树酯hit 击hole counter 数孔机hole diameter 孔径hole diameter error 孔径错误hole location 孔位hole number 孔数hole wall quality 孔壁品质hook 外弧hot dip 热浸法hull cell 哈氏槽hybrid 混成集成电路hydrogen bonding 氢键hydrolysis 水解hydrometallurgy 湿法冶金法image analysis system 影像分析系统image transfer 影像转移immersion gold 浸金(化镍金) immersion plating 浸镀法impedance 阻抗infrared reflow 红外线重熔inhibitor 热聚合抑制剂injection mold 射模ink 油墨innerlayer & outlayer 内外层insulation resistance 绝缘电阻intended position 应该在的位置intensifier 增强器intensity 强度inter molecular exchange 交互改变interconnection 互相连通ionic contaminants 离子性污染物ionic contamination testing 离子污染试验IPA 异丙醇5I : inspiration (启蒙)identification 确认计划目标implementation 改善方案information 数据internalization 制度化invisible inventory 无形的库存knife edges 刀缘Knoop 努普(硬度单位)kraft paper 牛皮纸laminar flow 层流laminate 基层板laminating 压合lamination 压合laminator 压膜机land 焊垫lay back 刃角磨损lay up 组合叠板layout 布线;布局lead screw 牵引螺丝leakage 漏电learning curve 学习曲线legend 文字标记leveling 平整levelling additive 平整剂levelling power 平整力life support 维系生命limiting current 极限电流line space 线距line width 线宽linear variable differential transformer(LVDL) 线性可变差动:转换器liquid 液状(态)liquid crystal resins 液晶树脂liquid photoimageable solder resist ink 液态感光防焊油墨liquid photoresist ink 液态光阻剂油墨lot size 批量lower carrier 底部承载板mechanical plating 机祴镀法machine scrub 刷磨清洁法macrothrowing power 巨分布力margin 钻头刃带market share 市场占有率marking error 文字错误masked leveling 儰装平整mass lamination 大型压板mass transfer 质量传送效应mass transfer overpotential 质量传递过电压mass transportation 质传master drawing 主图;蓝图material use factor 材料使用率mealing 泡点;白点memory 记忆装置meniscograph solderability measurement 新月型焊锡效果microetch 微蚀microetching 微蚀microfocus 微焦距microfocus system 微焦距系统microprofile 微表面microsectioning 微切片法microthrowing power 微分布力migration 迁移mini-tensile tester 迷你拉力测试仪mis hole location 孔位错误misregistration 焊锡面与零件面对位偏差misregsitration 对不准moisture and insulation resistance test 湿气与绝缘电阻试验molded circuit board (MCB) 模制电路板monoethanal amine 单乙醇氨monohydrate state 水化物monomer 单分子膜;单体mouse bite 锯齿;蚀刻缺口msec 毫秒muffle furnace 高温焚火炉multichip 超大IC型(多芯片模块)mylar 保护膜nail head 钉头NC drill 数字钻孔机negative etchback 反回蚀negative film 负片negative rake angle 负抠耙角network 回路;网络neutralization 中和nick 缺口nickel 镍nodule 铜瘤;瘤粒no flow resin 不流树脂noise 噪声nominal 标示nominal dimension 标定长度nominal gel time 标示胶性时间nominal resin content 标示胶含量nominal resin flow 标示胶流量nominal scaled flow thickness 标示比例流量厚度OA equip 办公室自动:化设备obsolescence factor 报废因素OEM 原设备制造商offset-list 补偿数据清单ohmmeter 欧姆计open 断路open circuits 断路open short testing 断短路测试opening 开口original art work (A/W) 原稿底片Others 其它outgrowth 增出over design 牛刀杀鸡overlap 钻尖重叠overlay entry 盖板overpotential 过电压oxidation 氧化oxide treatment 黑化处理oxided cytochrome 氧化性之细包色素oxygen evolution 氧气发生反应packed bed 充填床式pad 锡垫;圆配pad copper exposure pad露铜panel 小型板面;母板panel plating 一次铜电镀parasitic 寄生的part no. 料号pattern plating 二次铜电镀PCB ( print circuit board ) 印刷电路板pcs 片peel strength 抗撕强度peeling off 剥离(剥落) performance specification 性能规范permittivity 透电率perspectives on experience 经验透视PET 聚酯photodiode detector 发光二极管侦测器photo initiator 感光启始剂photoresist 光阻phototool 光具(指工作底片)piece 子板面pinceton applied research 腐蚀测定仪pink ring 粉红圈pit 凹点pitch 脚距planar 平面plating 电镀plating exposure 下镀层露出plug gauge 插规plug hole 孔塞PNL (panel) 排板polar-polar interaction 极性之间的吸力polyester 聚酯类polyglycols 聚乙二醇polyimide 聚亚醯氨poor bevelling 磨边加工引起突起,剥离poor drill 孔形不良poor HAL 喷锡不良poor marking 字体不良poor pad 锡垫不良poor printed 印刷偏差poor solderability 焊锡性不良poor touch-up 补线不良position control system 位置控制系统positive rake angle 正抠耙角power curve model 幕次曲线模式practice 工艺惯例preferred 良好premature tearing 提前撕裂prepolymer 预聚合物prepreg 胶片pre-process ( front-end) 制前press 压床press cycle 压合周期primary current distribution 一次电流分布primary 主要product lifetimes 生命周期product process 制程promoter 促进剂protocal 初步资料prussic acid 普鲁士酸PTF-based process 厚膜糊法PTH (plating though hole) 导通孔pull away 拉开pumice 浮石粉pumice scrub 喷砂清洁法pyrometallurgy 火烧法冶炼QC ( quality control) 品管QFP (quad flat pack ) 扁方型封装体qualification inspection 资格审查检验qualification testing 资格检定quality classification 品质等级quantitative 计量式测试rack 挂架radiometer 能量剂rake angle 抠耙角RAM [Random Access Memory 随机存取内存real time 关键时刻recessed trace process 凹槽线路法recovery tank 回收槽reduction 还原re-eninforcement 强化refraction 折光率reinforcement style 补强材料的型式register mark 对位用标记registration hole 对位孔registration pattern 长方形铜地REJ ( reject ) 退货;拒收rejectable 拒收release agent 脱模剂relief angle 浮离角remark 备注repair 修理resin content 树脂含量(胶含量)resin flow 胶流量resin flow percentage 树脂流量之百分率resin recession 树脂下陷resin smear 胶渣resist strippers 剥干膜剂resistor network 排列电阻resolution 解像度return on assets 资产报酬率reversibility 可逆性rework 重工rosin 天然松香rotating cylinder 旋转圆柱形roughtness 孔壁粗糙;粗慥routing 切外形,成型routing bit 铣刀runout 偏转S/L on hole 孔内沾文字S/M ( solder mask ), S/L 防焊文字S/M (solder mask) 防焊S/M error 防焊种类错误S/M on hole 孔内绿漆salt spray test 盐水喷雾试验sampling size 抽样数scope 范围scored 刻痕scoring 枢槽;刮线scrap 废框scratches 刮伤screen printing 网版印刷scum 透明残膜sealing 封孔处理secondary 次要semi-additive 半加成法sensitize 敏化sensitizer 敏化液separator 钢隔板sequential lamination 渐成式压法serrated edges 毛边shatter 破碎short 短路shunt 分路silane treatment 硅烷处理silicone coupling agent 硅烷偶合剂silk screen 文字印刷simulator 仿真器single axis 单轴sizing 底片之伸缩补偿skip 漏印skip printing 跳印;漏印sliver 丝条slot 开槽slotting 开槽SMD ( surface mount device ) 表面黏着组件smear 胶渣SMT ( surface mount technology )表面黏着技术sodium carbonate monohydrate 结晶水碳酸钠soft tooling 软性工具solder 焊锡; 锡铅solder bridge 锡桥solder bump 锡突solder float 漂锡solder mask adhesion 绿漆附着力solder on G/F 金手指沾锡solder on trace 线路沾锡solder plug 锡塞solder side 焊锡面solderability 焊锡性solid carbide 实质碳化物spacing 间距spacing nonenough 间距不足SPC ( Statistical Process Control ) 统计生管specification 规范special considerations 特别考虑spin coating 旋转涂布spindle 钻轴spiral contractometer 螺旋收缩仪spot face 铣靶spray coating 喷涂Squeegee 刮刀stacking structure 叠板结构stamping 冲压standard hydraulic lamination标准液压法standardizing 标准化starvation 缺胶step tablet 格片数stock option 认股选择权strain 应度strength 强度stressmeter 应力计subtractive 减除法surface convex 表面突起surface examination 表面检查surface insulation resistance (SIR) 表面绝缘电阻surface mount 表面黏着方式surface roughness 表面粗慥度surges 突波switch circuit 开关线路tab 金手指tack free 不黏taped hole gauge 锥形孔规target hole 靶孔task force 任务编组tensile strength 抗拉强度tensile stress 张性应力tent 浮盖terms and definitions 术语与定义termination load 抗匹配负载test circuit 测试线路test method 试验方法test point 测试点thermal shock 热震荡试验thermal stress 热应力试验thermistor 热电感应式thermo cycling 热循环试验theoretical cycle time 理论性周期时间thickness 厚度time to market 上市时机thickness distribution 厚度分布thief 补助阴极thin core 薄基板;内层板throwing power 分布力tolerance 公差;容差tooling hole 工具孔torque load 扭力拒之负载total quality program 全面的品质计划toughness 坚度trace error 线路错误trace nick & pin hole 线路缺口及针孔trace peeling 线路剥离trace pin-hole 线路针孔trace surface roughness 线路表面粗糙tarnish and oxide resist 抗污抗氧化剂transmittance 透光度trim line 裁切线true levelling 真平整true position 真正位置的孔;真位twist 板翘type 种类umbra 本影undercut 侧蚀uneven coating 喷锡厚镀不平整universal 万用型universal tensile tester 万用拉力试验机universal tester 泛用型测试机upper carrier 顶部承载钢uptime 稼动:时间vacuum deposition 真空蒸镀法vacuum hydraulic lamination真空液压法vaporizer 气化室V-cut V形槽vertical microsection 垂直微切片via hole 导通孔visible inventory 有形的库存vision inspection 目视检查V oid 孔破void in hole 孔壁上的破洞void in PTH hole 孔破walkman 随身听warehouse 仓库warp 板弯warp , warpage 板弯water absorption 吸水性wear resistance 耐磨度weave exposure 纤纹显露weave texture 织纹隐现wedge angle 契尖角week 周wet chemistry 湿式化学制程wet film 湿膜wet lamination 湿膜压膜法wet process 湿制程wetting 沾锡wetting balance 沾锡平衡法wicking 渗铜;渗入;灯蕊效应width 宽度width reduce 线细width-to-thickness ratio 宽度与厚度的比值window 操作范围work-in-process 在制品work order 工单working film 工作片working master 工作母片year 年yellow 金黄色yield 良率。
PCB专业术语翻译(英语)
PCB专业术语（英语）PCB printed circuit board 印刷电路板，指空的线路板PCBA printed circuit board assembly 印刷电路板组件，指完成元件焊接的线路板组件PWA Printed Wire Assembly，Aperture list Editor：光圈表编辑器。
Aperture list windows：光圈表窗口。
Annular ring：焊环。
Array：拼版或陈列。
Acid trip：蚀刻死角。
Assemby：安装。
Bare Bxnel：光板，未进行插件工序的PCB板。
Bad Badsize：工作台，工作台有效尺寸。
Blind Buried via：盲孔，埋孔。
Chamfer：倒角。
Circuit：线路。
Circuit layer：线路层。
Clamshell tester：双面测试机。
Coordinates Area：坐标区域。
Copy-protect key：软件狗。
Coutour：轮廓。
Draw：一种圆形的光圈，但只是用于创建线路，不用于创建焊盘。
Drill Rack：铅头表。
Drill Rack Editor：铅头表编辑器。
Drill Rack window：铅头表窗口。
D Code：Gerber格式中用不着于表达光圈的代码。
Double-sided Biard：双面板。
End of Block character（EOB）：块结束符。
Extract Netlist：提取网络。
Firdacial：对位标记。
Flash：焊盘，来源于早期矢量光绘机，在矢量光绘机中，焊盘是光通过光圈“闪出”（Flash）而形成的。
Gerber Data：从PCB CAD系统到PCB生产过程中最常用的数据格式。
Grid ：栅格。
Graphical Editor：图形编辑器。
Incremental Data：增量数据。
Land：接地层。
Layer list window：层列表窗口。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
PCB专业术语中英文翻译
很多PCB的书上使用的是英文，但是大多数的人又看不懂英文，这时候怎么办呢，我们需要翻译，但是如果每看到一个不会的词儿就去翻译，那么就太耗费时间了，所以我们捷多邦总结了一些常用的专业术语的中英文对照，希望能对大家有用。
1.印制电路：printed circuit
2.印制线路：printed wiring
3.印制板：printed board
4.印制板电路：printed circuit board (pcb)
5.印制线路板：printed wiring board(pwb)
6.印制元件：printed component
7.印制接点：printed contact
8.印制板装配：printed board assembly
9.板：board 1
10.表面层合电路板：surface laminar circuit (slc)
11.埋入凸块连印制板：b2it printed board
12.多层膜基板：multi-layered film substrate(mfs)
13.层间全内导通多层印制板：alivh multilayer printed board
14.载芯片板：chip on board (cob)
15.埋电阻板：buried resistance board
16.母板：mother board
17.单面印制板：single-sided printed board(ssb)
18.双面印制板：double-sided printed board(dsb)
19.多层印制板：mulitlayer printed board(mlb)
20.多层印制电路板：mulitlayer printed circuit board
21.多层印制线路板：mulitlayer prited wiring board
22.刚性印制板：rigid printed board
23.刚性单面印制板：rigid single-sided printed borad
24.刚性双面印制板：rigid double-sided printed borad
25.刚性多层印制板：rigid multilayer printed board
26.子板：daughter board
27.背板：backplane
28.裸板：bare board
29.键盘板夹心板：copper-invar-copper board
30.动态挠性板：dynamic flex board
31.静态挠性板：static flex board
32.可断拼板：break-away planel
33.电缆：cable
34.挠性扁平电缆：flexible flat cable (ffc)
35.薄膜开关：membrane switch
36.混合电路：hybrid circuit
37.厚膜：thick film
38.厚膜电路：thick film circuit
39.薄膜：thin film
40.挠性多层印制板：flexible multilayer printed board
41.挠性印制板：flexible printed board
42.挠性单面印制板：flexible single-sided printed board
43.挠性双面印制板：flexible double-sided printed board
44.挠性印制电路：flexible printed circuit (fpc)
45.挠性印制线路：flexible printed wiring
46.刚性印制板：flex-rigid printed board, rigid-flex printed board
47.刚性双面印制板：flex-rigid double-sided printed board,
rigid-flex double-sided printed
48.刚性多层印制板：flex-rigid multilayer printed board, rigid-
flex multilayer printed board
49.齐平印制板：flush printed board
50.金属芯印制板：metal core printed board
51.金属基印制板：metal base printed board
52.多重布线印制板：mulit-wiring printed board
53.陶瓷印制板：ceramic substrate printed board
54.导电胶印制板：electroconductive paste printed board
55.模塑电路板：molded circuit board
56.模压印制板：stamped printed wiring board
57.顺序层压多层印制板：sequentially-laminated mulitlayer
58.散线印制板：discrete wiring board
59.微线印制板：micro wire board
60.积层印制板：buile-up printed board
61.积层多层印制板：build-up mulitlayer printed board (bum)
62.积层挠印制板：build-up flexible pr
上面是一些比较常见的专业用语，有一些不是特别常用的有时候我们也会遇到，所以我们捷多邦也总结了一些不怎么常用的中英文对照，希望对你来说是有用的：
1.Absorption 吸收、吸入
2.Accelerated Test（Aging）加速试验、加速老化
3.Accelerator 加速剂、速化剂
4.Accept/Acceptance 允收
5.Acceptable Quality Level（AQL）允收品质水准
6.Accuracy 准确度ACF：
7.Adhesive copper foil 有胶铜箔
8.Activator 活化剂、添加剂比称为
9.Activator Active parts（Devices）主动零件，指积体电路或电
晶体
10.Addition Agent 添加剂
11.Additive Process 加成法、分全加成、半加成及部份加成
12.Back Light（Back Lighting）背光法
13.Back-UP 垫板
14.Backpanels/ Backplanes 背板、支持板，厚度较厚，
15.Ball Grid Array（BGA）球脚车列（封装）
16.Barrel 孔壁
17.Base Material 基材
18.Batch 批（同时间发料某一数量的板子）
19.Bevelling 切斜边
20.Binder 黏结剂
21.Capacitance 电容
22.Carbide 碳化物、碳化钨钻头
23.CAR: Corrective Action Report 改善报告
24.Carbon Treatment 活性碳处理
25.Card 卡板
26.Carrier 载体
27.Cartridge 滤芯
28.Cathode 阴极
L: Copper Clad Laminates 铜箔基板
30.Ceramics 陶瓷
31.Certificate 证明书
32.CFC 氟氯碳化物
33.Chloro-Fluoro-Carbon Chamfer 倒角、去掉直角
34.Characteristic Impedance 特性阻抗
35.Cheek list 检察清单
36.Chip 晶粒、晶片
37.Chip On Board 晶片黏著板
38.Clean Room 无尘室(Class 100)
39.Cleanliness 清洁度
40.Clearance 余隙、余环
41.COB（Chip on Board）晶片在板上直接组装
42.COC（Certificate of Compliance）出货合格书。