DEK-Pro Flow-Level I
海康威视设备网络sdk编程指南解码器)
DEK印刷机手册INFINITY目录
printing to the Infinity platform. ProFlow enables significant savings in print excursion time, cleaning overheads and paste maintenance, and has been shown to raise throughput by over 100% in true production environments. ProFlow complements Infinity’s throughput oriented feature-set, and delivers substantial savings in paste usage. Print integrity is enhanced with DEK’s new Vortex™ underscreen cleaning unit. The optional Vortex deploys a paperless system to execute wet, dry and vacuum assisted cleaning in a single cycle for dramatically increased throughput. Infinity embodies DEK’s most powerful vision technology to complete 2Di stencil and post-print inspection accurately, within the shortest possible time. Inspection results provide closedloop feedback to the Vortex system plus instant status reporting and historic analysis in conjunction with SPC.
KODAK PROFESSIONAL DCS Pro Back 和 DCS Pro Back Plu
MAMIYA Interface PlateTo use the KODAK PROFESSIONAL DCS Pro Back or DCS Pro Back Plus (Pro Back/Pro Back Plus) with the MAMIYA RZ67 PRO II camera body (MAMIYA camera body), you must first attach the MAMIYA Interface Plate to the camera body.1.Insert the four studs on the MAMIYA camera body into the four holes on the MAMIYA InterfacePlate.2.Slide the Lock handle downward to secure the plate to the camera body.3.Turn the lever on the Cable Release plug to O. (Refer to the picture on page 3.) Insert the plug into theauxiliary release jack on the front of the RZ67, then turn the lever to L to lock the plug. (Whenremoving the cable, turn the lever from L to O and pull the plug out.)Lock handlelever4.Attach the Pro Back/Pro Back Plus to the MAMIYA Interface Plate as described in the DCS Pro Backor DCS Pro Back Plus User’s Manual.5.Once the Pro Back/Pro Back Plus is attached, lock the Shutter Release on the camera body by rotatingthe Shutter Release lock as described in your RZ67 PRO II instruction manual. Use the Release button on the Capture cable to capture images. (The Shutter Release on the camera bo d y will not capture digital images.)Release button Array6.On the side of the camera body, set the R-M lever to M. The camera body does not respond to ProBack/Pro Back Plus shutter release commands if the R-M lever is not in the M position.Lens Sync ErrorIf the Pro Back/Pro Back Plus issues a shutter release command and a lens shutter opening is not detected, the LCD displays the error message "Lens error: No sync detected!". If this error message appears when using your MAMIYA RZ67 PRO II, check for the following:•The Lens Sync Cable is not connected between the MAMIYA lens Flash Sync Terminal and the Pro Back/Pro Back Plus’s Lens Sync Cable jack.•The MAMIYA Interface Plate's Cable Release is not plugged into the RZ67 PRO II camera body's auxiliary release jack. See step 3 on the previous page.•The MAMIYA Interface Plate's Release button does not have its two white dots aligned. See "Electromagnetic Cable Release" on the next page.•The MAMIYA RZ67 PRO II camera body has not been wound. Push the Cocking Lever all the way down.•The MAMIYA RZ67 PRO II camera body R-M lever is not in the M position. See step 6 above.•The MAMIYA RZ67 PRO II camera body's Shutter Speed dial is at the AEF setting and an AEviewfinder is not installed, or the dial is at the RBL setting and an RB lens is not installed.•The Shutter Release collar is in the Emergency Shutter Operation position. Lock the Shutter Release Button as described in step 5 above.Electromagnetic Cable ReleaseRelease ButtonThe Release button is a two-step position button. Each position provides a different function.•Lightly press the Release button halfway down to collect photometric data.•Press the button fully down to perform a shutter release.When the two white dots are aligned, the ring is in the correct position for metering and shutter release.When taking long time (LT) exposures in Bulb mode, lock the Release button by turning the outer ring clockwise and aligning the orange dot with the white dot. The Shutter release locks. To disengage a locked Shutter release, turn the ring counterclockwise and return the orange dot to its original position.NOTE: We do not recommend Pro Back/Pro Back Plus exposures that exceed 1/4 second shutter times.Orange dotLong timeWhite dots Release button leverCable Release plug。
MSP430f5438初学者笔记
MSP430f5438初学者笔记一、简介1.1CPU：16-bit RISC除program-flow指令外所有指令都在寄存器和7种源操作数寻址方式及4种目的操作数合作下执行16个寄存器，register-to-register指令执行时间是一个CPU时钟R0 程序计数器寄存器20-bitR1 堆栈指针20-bitR2 状态寄存器16-bitR3 不变的产生器R4~R15 通用寄存器1.2指令集：51指令3格式7中寻址方式附加指令1.3操作模式6个可软件设置的LOW-POWER模式一个中断事件可以唤醒5个模式中的任何一个，响应请求，并从中断程序中返回原模式Mode ACTIVE DISABLEDActive mode (AM) 所有时钟ACTIVELow-power mode 0 (LPM0) ACLK SMCLK FLL CPU MCLK LPM1 ACLK SMCLK CPU FLL MCLK LPM2 DCO发生器ACLK CPU MCLK FLL DCOCLK LPM3 ACLK CPU MCLK FLL DCOCLK DC发生器LPM4 晶振关闭完整数据保留LPM5 内部调节器关闭无数据保留通过RST和IO唤醒1.4中断矢量地址：FFFF~FF80H1.5 SFR处于最低地址空间可以进行字访问和字节访问1.6存储256K闪存空间64K程序存储器16KRAM 512BBSL程序装载器用于编程存储器串连接口1.7外围时钟：支持统一的时钟系统UCS包括：32K手表晶振（XT1 低频模式）内部低频振荡器VLO内部平衡低频振荡器REFO内部集成数字控制器DCO高频晶振（XT1高频模式or XT2）FLL锁频环连同一个数字调节器使得DCO构成一个多倍可编程的手表晶振时钟信号：ACLK 32K手表晶振、高频晶振、VLO、REFO、DCO MCLK CPU用，来源同ACLKSMCLK 用于外围来源同ACLK多分频ACLK电源管理模块（PMM）包括一个集成的PMM电压调节器,提供核心电压设备和包含可编程的产出水平,来提供电力的优化。
SMT生产流程与制程简介
Solder Paste Inspection
Pick& Place
Reflow Soldering
AOI Inspection
X-Ray Inspection
ICT Test
DEK Infinity API
➢Screen Print Solder Paste ➢Maximum Size 510 x 508 mm /(610 x 508mm*) ➢Minimum Size 40 x 50 mm ➢Thickness range 0.2 – 6 mm ➢Underside component clearance 3- 42 mm ➢Alignment: Stencil to Board Repeatability 1.6 Cpk @+/- 25μm ➢Product Changeover: 2 minutes ➢New Product Setup: < 10 minutes ➢Support 2D(Coverage) Inspection
➢In Circuit tester；ICT ➢Short、Open and Power Test ➢Low MDA Entry Price ➢Conduct function test with Advanced PXI Module Architecture ➢Optional Digital Components Test ➢Optional On Board programming and Boundary Scan Test ➢Two Stage Fixtures Available
4
Bare Board
Solder Printing
2nd Side SMT
Pick & place
福禄FlowPath使用说明书
高流筛选器F602系列产品目录说明书
Catalog 0730-2Hi-Flow F602 SeriesHi-Flow Filters1-1/4 & 1-1/2 Inch PortsAutomaticDrainManual DrainFeatures• Excellent water removal efficiency • For heavy duty applications with minimum pressure drop requirement • Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt separation • Large filter element surface guarantees low pressure drop and increased element life• 40 micron filter element standard, 5 micron available• Metal bowl with sight gauge standard • Twist drain as standard, optional auto drain• Large bowl capacity• Optional high capacity bowl(s) available • High flow: 1-1/4" – 390 SCFM §1-1/2" – 450 SCFM §Drains and Options Blank Manual Twist Drain Q External Heavy Duty Auto Drain R Internal Auto DrainOrdering InformationF 602 — 10 W J /**BowlE 32 oz. Large Capacity Metal without Sight GaugeW 16 oz. Metal with Sight GaugeElement G 5 Micron J 40 MicronPort Size 10 1-1/4 Inch 12 1-1/2 InchPort Threads — NPT G BSPPEngineeringLevel * Will be Entered at Factory.Standard part numbers shown bold.For other models refer to ordering information below.§ SCFM = Standard cubic feet per minute at 90 PSIG inlet and 5 PSIG pressure drop.PortSize NPTTwist DrainAutomatic Pulse DrainMetal Bowl / Sight Gauge - 16 oz.1-1/4"F602-10WJ F602-10WJR 1-1/2"F602-12WJ F602-12WJR Metal Bowl without Sight Gauge - 32 oz.1-1/4"F602-10EJ F602-10EJR 1-1/2"F602-12EJF602-12EJRF602 Filter Dimensions A B C D E F F602-10W, F602-12W4.90 (124)8.18 (208)9.46 (240)5.19 (132) 1.28 (32.4) 2.45 (62.2)F602-10E, F602-12E4.90 (124)11.41 (290)12.69 (322)5.19 (132)1.28 (32.4)2.45 (62.2)inches (mm)BOLD ITEMS ARE MOST POPULAR.Catalog 0730-2Technical Specifications – F602F602 Series, 1-1/4 & 1-1/2 Inch Ports Hi-Flow Filters50100150200250300350400500450102345Flow - SCFMP r e s s u r e D r o p - P S I GP r e s s u r e D r o p - b a r.1.2.3Primary Pressure - PSIG 251005075150Primary Pressure - bar 0406080100120140160180200220201.73.4 5.2 6.910.3Flow - dm n 3/s Technical InformationF602 Filter Kits & AccessoriesBowl Kits –Aluminum (E) .....................................................................BK603B Zinc with Sight Gauge (W) ..............................................BK605WB Drain Kits –External Auto (E) .................................................................SA603D External Auto (W) ................................................................SA602D Internal Auto (All) ............................................................SA602MD Manual (All) ...................................................................SA600Y7-1Semi-Automatic “Overnight” Drain ...................................SA602A7 (Drains automatically under zero pressure)Filter Element Kits – 40 Micron (All) .....................................................................EK602B 5 Micron (All) .....................................................................EK602VB Repair Kits –Deflector, Baffle Assembly, and Retaining Rod (All) ..........RK602C External Auto Drain (All) .....................................................RK602D Internal Auto Drain (All) ...................................................RK602MD Metal Bowl Sight Gauge (W) ........................................RKB605WBSpecificationsBowl Capacity –Aluminum (E) .................................................................32 Ounces Zinc (W) ..........................................................................16 Ounces Port Threads ...........................................................1-1/4, 1-1/2 Inch( ) = Bowl TypeFloat (Inside Bowl) Manual Push ButtonDrain(Outside Bowl)Drain (1/4" NPTF)Connection Through Bowl (1/8" NPSM)P r e s s u r e D r o p - P S I G0.1.2.3P r e s s u r e D r o p - b a r20406080100120140160180200220240260280Flow - SCFM Flow - dm n 3/sPrimary Pressure - PSIG 1.7 3.4 5.2 6.910.3Primary Pressure - bar“Q” Option External Heavy Duty Auto Drain SA602D / SA603DFor heavy duty applications where the filter is being used to remove large volumes of liquid and/or particulate matter from the airstream, the external automatic drain (“Q” option) should be used.Pressure & Temperature Ratings –Aluminum Bowl (E) ............................0 to 300 PSIG (0 to 20.4 bar) 40°F to 150°F (4.4°C to 65.6°C) Zinc (W) ..............................................0 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C) With Internal Auto Drain (R) ..........20 to 175 PSIG (1.4 to 11.9 bar) 40°F to 125°F (4.4°C to 52°C) With External Auto Drain (Q) ............30 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C)Weight –Aluminum Bowl (E) ...................................... 7.7 lb. (3.49 kg) / Unit 31 lb. (14.06 kg) / 4-Unit Master Pack Zinc Bowl (W) ................................................. 7 lb. (3.18 kg) / Unit 28 lb. (12.70 kg) / 4-Unit Master PackMaterials of ConstructionBody .............................................................................................Zinc Bowls –(E) ...................................................Aluminum without Sight Gauge (W) ................................................................Zinc with Sight Gauge Drain –Manual Twist & Overnight .......................................................Brass Housing “R” ............................................................................Acetal Housing “Q” .........................................................................Bronze Filter Elements –40 Micron (Standard) ................................................Polypropylene 5 Micron (Optional) ...................................................Polypropylene Seals ...........................................................................................Nitrile Sight Gauge ...............................................................................Nylon。
DEK 中文操作说明书
溫度(Temperature): 機器內部溫度顯示
週期時間(Cycle Time): 印刷週期時間顯示
2/34
穿越時間(Throughput): 生產週期時間顯示 軟體版本(SW Version):機器版本顯示 2 生產參數(Process Parameters): 印刷模式(Printer Mode): 前刮刀印刷速度(Front Printer Speed): 前刮刀印刷速度顯示 後刮刀印刷速度(Rear Printer Speed): 後刮刀印刷速度顯示 前刮刀壓力(Front Pressure): 前刮刀壓力顯示 後刮刀壓力(Rear Pressure): 後刮刀壓力顯示 脫模速度(Separation Speed): 脫模速度顯示 3 數量(Rates): 批次數量(Batch Count/Limit): 顯示此批生產數量 生產板數(Board Count/Limit): 顯示已生產數量 清潔鋼板次數 1(Clean 1 Count/Rate): 顯示清潔鋼板次數模組 1 清潔鋼板次數 2(Clean 2 Count/Rate): 顯示清潔鋼板次數模組 2 刮刀印刷方向(Print Direction): 顯示刮刀印刷方向 4 影像視窗: 同時監看鋼板及 PC 板的視覺點(Fiducial mark)
支撐器是紅色本體，內部由一彈簧支撐及移動，將印刷頭昇起來將支撐器放在機器左手邊的機 器電磁線圈座裏，確定黑色末端朝下銀色末端朝上。(圖 6)
(圖 6)
(圖 7)
高電壓的預防(PROTECTION FROM HIGH VOLTAGE)：
機械(Mechanisms)：
機器屬於第一級數的電性防護依照 IEC536 的要 1:1993 所有機器在出貨前必須接受電路安全
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
22
3>. Position two printed circuit boards to be printed between the tooling top and bottom opening faces 放置两块印刷的电路板在分开的顶PIN 顶端和底端的 之间的位置 4>. Tighten the bolt locking the adjustable tooling top to the tooling bottom
14
10>. Move the sensor to right position (between light and dark position) 移动感应器到正确位置(就是感应器刚好发光的位置) 11>.Carefully re-tighten the sensor securing screw Note: To prevent damage to the sensor ; 小心拧紧感应器的固定螺丝 注意: 要防止感应器损坏 12>.Replace the pressure mechanism cover 将压力装置的盖子放回原处 13>. Close the machine cover cassette 关上机器的正面保护盖子
Show follow window 显示下面窗口
12
4>.Select “Drive System to print Height” and press “Select Module”(F1) 选择 “移动到系统印刷高度” 按 “Select Module”(F1)键 5>.Put 2.0mm Allen key on the Cassette’s Diaphragm Note: the Cassette must empty 将2.0的六角棒放在盒子的橡胶隔离膜上 注意: 盒子内必需是空的,没有印刷物料 6>.Select “Toggle air pressure” and press “Select Module”(F1) 选择 “Toggle air pressure” 按 “Select Module”(F1)键
DEK-Pro Flow Training
EE: Wei Li 2007/02/10
Catalog
大纲
1.ProFlow mechanism
ProFlow的机器结构
2.Adjustment and settings
调整和设置
3.Maintain 保养
2
1. Pro Flow Mechanism 机械结构
•wash each part with water 用清水冲洗
•put parts into Drier and dry them up
放入干燥箱中烘干 •load PrlFlow 组装印胶头
29
胶套
擦拭胶刀片
刀片固 定条
铁盖子 图（ition 原点位置
6
3 加热系统
1.Piston Crosshead 活塞丁字头
2.Pressure Actuators 汽缸
7
8
1.Stepper Motor Drive pulley 步进马达滑轮 2.Stepper Motor (Behind Attachment Plate) 步进马达
3.ProFlow Home Sensor 原点感应器
10
B>adjustment as follow 调整步骤如下: 1>.Press Maint(F8) 按Maint(F8)键
2>.Press Diagnost(F6) 按诊断键(F6)
Show follow window 显示下面窗口
11
3>.Select ProFlow and press “Select Module”(F1) 选择 ProFlow 按 “Select Module”(F1)键
•clean the contact area in ProFlow and silk screen
清洁印胶头与网版表面接触部分，包括擦拭胶 刀片外延，胶垫底部
27
● Three Monthly maintenance 三个月维护
•first complete daily maintenance 先完成日常维护 •unload ProFlow．As follow picture 拆散出印胶头各部件(如图一．二） •take out red glue in ProFlow , clean leftover red glue on each part 取出多余红胶，清洁各部件残留红胶
13
7>.Opening the machine cover 打开机台正面安全盖 8>.Lift off the ProFlow pressure mechanism cover 取下压力装置的盖子 如右图部分
9>.Loosen the sensor using a 1.5mm Allen Key 用1.5mm的六角松开感应器
6>.Press Move to position (F1) , Let ProFlow to setting position 按F1键,使ProFlow到上面设置的位置
20
7>. Position a 0.1 mm shim on the stencil under the transfer head cassette 在印刷头的盒子与钢网中间放置一块0.1mm的垫片 8>. Go to Step 5> and 6> , let transfer head cassette to contact 0.1mm shim 重复第5步和第6步,使印刷头的盒子与钢网之间只有 0.1mm的距离
。
3
1.Machine Print Carriage 印刷支架 2.Print-head Drive Mechanism 驱动装置 3.Downstop 挡块
4.ProFlow Pressure 压力装置
5.ProFlow Transfer Head 移动印刷头装置
4
5
1.Diaphragm 橡胶隔离膜 2.Diaphragm Retainer 橡胶隔离膜固定支架 3.Filling Port bayonet Cap 填充注入口 4.Filling Port bayonet Cap 填充注入口 5.Filling Port bayonet Cap 填充注入口 6.Recharging Nozzles 填充注入的吸嘴
15
(二). Adjustment ProFlow Contact position (ProFlow Height) 调整PorFlow接触钢网位置即高度
1.Press Maint(F8) 按Maint(F8)
2.Press Calib-Machine(F1) 按校正机器键(F1)
16
Show follow window 显示下面窗口
9>. Press Exit(F8) 按退出(F8)键,自动保存刚校正的数据
21
(三).ProFlow Stencil Support Height adjustment ProFlow 支撑PIN 高度调整 1>. Loosen the 7 mm hexagonal nut securing the tooling bottom 拧松顶PIN 底部的7mm 内六角螺丝 2>. Slide the adjustable tooling top upwards to open up the tooling top and bottom faces 将顶PIN 顶端向上滑动调整,从而将顶PIN的顶端和 底端分开
31
Remark: Contact Position 接触位置
32
Remark : Print Height 印刷高度
33
The end
34
28
•check retainer , Cassette Plunger and wiper Blade， all of parts is full 检查胶垫胶套是否完好，擦拭胶刀片是否无损坏，所有 配件是否齐全 •unload ProFlow．As follow picture 拆散出印胶头各部件(如图一．二）
由顶PIN的顶端向顶PIN的底端压紧,后锁紧螺丝
23
As follow picture
24
5>. Remove both printed circuit boards 取出印刷的电路板 Note: The support is now set to the correct screen height , is 81mm + thickness of board
17
3>.Press ProFlow (F1)
按ProFlow (F1)键
4>.Press ProFlow Heights (F1)
按ProFlow 高度(F1)键
18
Show follow window 显示下面窗口
19
5>.Press Incr.(F6) and Decr.(F7) to modify the “ ” value, the factor setting for the value is set to 3 mm. 通过按F6 或者 F7来修改数值,通常我们首先设置为3 mm
9
2.Adjustment and Settings 调整与设置
(一).Cassette Low Sensor 盒子内印刷材料量报警感应器调整 A> mechanism 结构
1. Graduated Scale 刻度标识 2.Piston Crosshead 活塞丁字头 3.Securing Screw(1.5mm Allen key) 固定螺丝 4.Sensor 印刷物量感应器