米顿罗三柱塞高压往复泵中文版
Gaso, 3466-S, 三柱塞泵产品规格表说明书
Spec U.S. Standard Type:triplexMinimum Plunger Diameter:2"Maximum Plunger Diameter:2¼"Stroke length:4"Maximum Working Pressure:2,165 PSIRod/Piston Load:6800lb Gallons per Minute:102.0Barrels per Day:3497Brake Horse Power:90.8Gaso, 3466-S, Triplex, Plunger PumpPumps in this series3466-L 3466-SSpecsPump CurvesHover over Power Curves to reveal RPM and GPMFeatures/BenefitsGASO TRIPLEX PLUNGER PUMPSRatings published here in are intended to be used only for preliminary planning purposes, and as such carried no warranties whatsoever. All applications for gas opines must be approved in writing. THE INFORMATION CONTAINED HERE IS TRANSCRIBED FROM A GASO TECHNICAL MANUAL FROMM THE 1960’S - 70’S. IEQ INDUSTRIES OR THE CUSTODIANS OF THIS WEBSITE ARE NOT RESPONSIBLE FOR ITS CONTENT.GASO pumps are engineered to deliver the book plus values which have distinguished GASO pumps for over 60 years and to provide longer life and lowermaintenance costs. Important design features include:0 RPM 0.0 HP50 RPM 11.4 HP100 RPM 22.9 HP150 RPM 34.3 HP200 RPM 45.8 HP250 RPM 57.2 HP300 RPM 68.7 HP350 RPM 80.1 HP400 RPM 91.6 HP450 RPM 103.0 HP1020304050607080902¼" DIA. — 1710 MAX.P.S.I.2⅛" DIA. — 1917 MAX.P.S.I.2" DIA. — 2165 MAX. P.S.I.Phone:IEQ Industries Ltd PO Box 230097Grand Rapids, MI 49523800.544.9053 |616.452.6882Power End SpecificationsPower Frame. High-strength gray iron alloy casting with heavy wall sections well written to ensure rigid construction.Crankshaft. Mounted with centerline of shaft on centerline of cross heads. Crankshaft may extend from either side of the pump.Crankshaft Bearings. Interchangeable heavy-duty roller bearings.Connecting Rods. All triplex plunger pumps are equipped with H type construction rods, with renewable Babbit lined steel backed shell bearings at the crank end and bronze bushings at crosshead end.Crossheads. Figures 3088, and series 3200, 3300, 313, 3400, 3800, 3900, 3600 and 3700 pumps are furnished with cylindrical type high-strength alloy castings. Series 3500 pumps are furnished with semi-cylindrical typecasting. Cross head tends are hardened and ground steel.Lubrication. All power and parts are lubricated by splash system from oil in the crankcase reservoir. Power frame has an oil return channel, from front of the cross heads back to the crankcase, to permit constant circulation of oil and to help keep oil cool. Positive power and lubrication is optional for series 3700 pumps.Stuffing Boxes. Figures 3088 and series 3200, 3300, 3400, 3500, 3800, and 3900 pumps are furnished with double lip “Uâ€Âcup packings. Series 3630 700 pumps are furnished with a set of four non-crushable lip type packing rings.Fluid End SpecificationsFLUID END BODY. Alloys which are stocked our Molybnenum alloy iron for crude oil and freshwater service, and steel for pumping petroleum products in hazardous locations. Aluminum bronze alloys are used for salt water and other corrosive liquids. Special alloys such as Hastalloy C, Inconel or stainless steel can be furnished upon request.VALVES. Figure 3211 and 3364 pumps are furnished standard with wing guided type valves and seats. Figures 3365, 3088 and series 3113, 3400, 3500, 3800, 3900, 3630 700 pumps are furnished with stem guided disk type valve assemblies.CYLINDER HEADS AND VALVE COVERS. 3211 and 3364 pumps with aluminum bronze and Molybdenum alloy fluid ends have threaded valve covers and cylinder heads, all other our bolt on type.PLUNGERS. Plunger materials are available in: file hard steel,colmonoy's surfaced steel, solid ceramic, and chrome plated steel.STUFFING BOXES. All triplex pump boxes, with the exception of figures 3088, 3583, and series 3900, 3630 3700 pumps, are board directly into the fluid body. Stuffing boxes are for figures 3088, nerdy 3583 and series 3800, 3900, 3630 and 3700 pumps are replaceable type.PACKING. Standard packing is a set of non-crushable lid tight packing rings. Other packing can be furnished for special applications.PlLUNGER LUBRICATION. Furnished by use of grip oilers or regulated flow of oil from a force-feed's lubricator. Lubricate or is mounted on the pump with separate oil lines to each plunger.Disclaimer IThis website is intended as a reference tool only. It has been constructed from published data that is based on manufacturer's sales and engineering documents that are either current, historical and obsolete. Much of the machinery data contained herein has been re-rated through the years with different engineering criteria which maybe in conflict with legacy data. Much of the content published here is calculated online with the use of dynamic data using formulas and extrapolations considered to be sound engineering formulas and are correct to the degree that the data used is accurate. We have done our best to be as precise as as possible in this posting but do not represent any of the calculations or performance data to be entirely accurate. The data published here is intended to be general information rather than actual and to serve as a reference rather than a technical absolute. The user of such data should confirm such information independently.Copyright and Disclaimers is your resource for Gaso pumps, Gaso pump parts and a supplier of ORIGINAL GASO PARTS and equipment, new used and remanufactured Wheatley, GASO andWheatley/GASO plunger and piston pumps and pump parts and is not affiliated with Wheatley/GASO Inc. or its parent company, National Oilwell Varco,p Copyright ©2017, IntelleQ Holdings, LLC. All rights reserved, *Used under license from IntelleQ Holdings, LLC.。
米顿罗-计量泵
流量
冲程速度调节(变频)
排出冲程
时间 吸入冲程
平均流量
冲程长度调节
排出冲程
流量
时间
吸入冲程
平均流量
米顿罗- 流体投加设备的世界领导者
计量泵
产品介绍
米顿罗 - 全球计量泵的领导者
• 世界第一台计量泵的发明者 • 最完全的产品系列 • 持续的研发投入 • 一流的制造加工及质量保证 • 完善的售后服务 • 优异的全球及国内业绩
• 柱塞通过液压油推动隔膜驱动物料 • 隔膜受力均匀, 寿命较长 • 可通过内置安全阀释压保护 • 零泄漏 • 应用范围最广 • 低维护率
两种泵头隔膜受力比较
机械隔膜泵头
工艺物料侧
10 BAR
常压 柱塞
液压隔膜泵头
工艺物料侧 液压油侧
100 BAR 100 BAR
隔膜
隔膜
计量泵驱动形式
三种基本形式： • 电机驱动 • 电磁驱动 • 空气或天然气驱动
主要应用：
• 适用于各行业高压、高流量等苛刻工艺过程
PRIMEROYAL系列计量泵
三明治
式双隔膜检漏(就地/远程)报警,
保温夹套；
•多头最多可达11头,每头流量
均可单独调节
•手动，电动，气动,调频控制
•高性能液压隔膜泵/柱塞泵
•符合API 675标准
• 主要应用：
• 油田&天然气, 石化,化工，电力等工艺过程
• ...
MILROYAL系列计量泵
PRIMEROYAL系列计量泵
•单头流量 : 0 - 16,000 l/h •最高压力 : 1000 bar •调节比 10:1,稳态精度1% •输送介质温度可达100O℃以上 •隔膜材料: PTFE/PEEK/316 •泵头结构: 双隔膜就地/远程报警, 保温夹套 •可多头并联,每头流量均可单独调节 •手动，电动，气动,调频控制 •高性能液压隔膜泵/柱塞泵 •符合API 675标准
米顿罗隔膜式化学计量泵安全操作规程范文（二篇）
米顿罗隔膜式化学计量泵安全操作规程范文一、引言米顿罗隔膜式化学计量泵是一种用于输送各种化学液体的设备，其操作涉及到泵的运行、维护和安全。
为了确保操作人员和设备的安全，制定了本安全操作规程。
二、安全设备1. 在操作过程中，必须戴上合适的防护眼镜，防止泵液喷溅到眼睛。
2. 在操作过程中，应穿戴适当的防护服，确保皮肤不直接接触到泵液。
3. 在操作过程中，要轻拿轻放工具，避免工具落地造成伤害。
4. 在操作过程中，确保有充足的通风，避免吸入有害气体。
三、安全操作步骤1. 检查泵的工作环境是否安全，确保没有明火、易燃易爆物品等危险物。
2. 检查泵的供电是否正常，确保电源稳定。
3. 在操作泵之前，确保操作人员已经接受相关培训，了解泵的工作原理和操作要点。
4. 打开泵的主电源开关，确保电机运行正常。
5. 检查泵的各个连接部位是否密封良好，确保没有泄漏。
6. 通过观察显示屏或仪表，确保泵的运行参数正常。
7. 在操作泵之前，确保操作人员将注意力集中在泵上，避免分散注意力造成安全隐患。
8. 在操作过程中，严禁将手伸入泵内或近距离接近泵口。
9. 在操作过程中，严禁将泵液直接倾倒入污水或其他泄露处，应采取相应的密闭方式进行处理。
10. 在操作过程中，如发现异常情况，应立即停止泵的运行，并采取相应的紧急措施。
四、泵的维护1. 定期检查泵的密封件，如发现损坏应及时更换。
2. 定期清洗泵的过滤网，确保通畅。
3. 定期检查并紧固泵的连接螺丝，确保泵的连接牢固。
4. 定期检查并清理泵的出口管道，确保畅通。
5. 定期检查泵的电气设备，如有异常应及时处理。
6. 定期对泵进行润滑，确保泵的运转顺畅。
五、应急措施1. 如发生泵故障、泵液泄漏等紧急情况，应立即切断泵的电源，并采取相应的应急措施。
2. 如泵液误入眼睛或皮肤，应立即用大量清水冲洗，并及时就医。
六、总结通过本安全操作规程，能够有效地提高操作人员的安全意识和操作水平，减少事故的发生，确保泵的正常运行和设备的安全。
米顿罗计量泵使用及技术说明
米顿罗计量泵使用及技术说明米顿罗计量泵可以对许多液体进行输送，尤其是具有腐蚀性的液体，作为一种特殊的容积泵，其在现代工业与技术的不断发展中而不断的进步，不断的满足着生产工作的需求，对于泵这种机械产品来说，对冲程的调节是非常重要的，米顿罗计量泵也是一样，那么，在输送过程中，米顿罗计量泵是如何对冲程进行调节的，其调节冲程的方式都有哪些?接下来就让我们一起来看看吧。
米顿罗计量泵在输送过程中，冲程的调节方式有很多种，而比较常用的应该就是以下这三种了。
第一种方法是在输出管路系统设置旁通回路，然后对旁通阀进行调节，并控制回冲程这样就达到了对系统的输出冲程进行调节的目的，但是，通过这种方法来对冲程进行调节，会加大能量的损耗，这也是这种冲程调节方式的一大缺点。
第二种方法是通过对泵转速的改变来对冲程进行调节，这种方法需要在泵的平均冲程与转速成正比的情况下进行，而往复泵正好有这个特性，所以，可以通过这种方式来看对冲程进行调节;此外，通过改变转速调节冲程的方法还需要对装置或电动机进行调速，但是，在小冲程的时候，冲程数太小而导致排液时间过长，这对于某些化学反应是不允许的，所以还需要多多的注意。
第三种方法是一种比较常用的方法了，其是通过对泵活塞(柱塞)的行程长度的调节来对冲程进行调节，这种方法的一大优点是计量精度高，而且即使是在小冲程的情况下，仍然可以满足线性要求，可以说是比较有效的一种方法。
米顿罗计量泵调节冲程的方法还有很多，需要操作人员根据实际的运作情况来对方法进行选择，从而选择到合适的冲程调节方法来促进泵的正常、顺利的运作。
米顿罗计量泵设备说明与使用特点性能隔膜泵头使用米顿罗公司的专利MARS技术(自动机械补油系统)，综合了各种传统泵头的优点。
高性能隔膜泵头取消了传统液压隔膜泵头所需的物料端的圆盘隔膜护盘，从而使泵头既具有管式隔膜的“直接通过性”和柱塞泵的低NPSH(净正吸入压头)要求等性能，又能有效的保护隔膜，延长隔膜寿命，且避免了传统计量泵头精度可能随使用时间变化的弱点。
米顿罗计量泵技术说明
maxRoy 系列
马达驱动液压隔膜计量泵 手动，电动，调频控制 最大流量 ：1,091 L/H 最高压力 ：10 Bar
2
Milroyal 系列
马达驱动液压隔膜计量泵 手动，电动，调频，气动控制 单头最大流量 ：8,150 L/H 最高压力 ：690 Bar
Primeroyal 系列
马达驱动液压隔膜计量泵 手动，电动 , 调频，气动控制 单头最大流量 ：15,882 L/H 最高压力 ：615 Bar
PE.375”O.D.
1/4”NPT M
PE.250”O.D.
1/4”NPT M
PE.375”O.D.
1/4”NPT M
进、出口连接
316SS 1/4”NPT M 1/4”NPT M 1/4”NPT M
A1 系列手动调节电磁泵 流量 ：22 L/hr 压力 ：17.3 Bar
A146 ---- 350TI
7- 接受外部脉冲信号自动调节冲程长度和速度 ; 9- 接受外部 4-20mA 信号自动调节冲程长度和速度
* 转换到外部控制方式时 , 最小输出流量为零
出口压力 Bar
10.3 6.9 3.5 2.1
进、出口连接
Acrylic/PVC/PVDF
316SS
PE.375”O.D.
1/4”NPT M
PE.375”O.D.
高精度单向止回阀系统 ---- 保证计量泵的恒定高精度
米顿罗公司计量泵的出、入口分别装有高精度的单向止回阀，阀体具有独特的导向设计。
3
隔膜检漏报警技术 ---- 保证 输送危险性物料过程的安全
米 顿 罗 公 司 采 用 双 隔 膜 技 术 及“ 三 明 治”式三隔膜技术，使偶然发生的隔膜 破损情况能被迅速检测，并给出报警信 号，从而避免危险性物料的可能泄漏。
三柱塞式往复泵
清洁与清洁
保持泵的清洁，定期清除 灰尘和杂物，防止堵塞。
记录与报告
对日常维护情况进行记录， 发现异常及时报告。
定期保养
润滑系统保养
定期更换润滑油，清洗油箱，检查油路是否畅通。
机械部件检查
检查泵的各部件是否磨损、松动或损坏，及时更 换或修复。
密封件更换
根据需要更换密封件，如填料、机械密封等，保 证密封性能。
流量稳定
由于每个柱塞的往复运动是同步 的，因此三柱塞式往复泵的流量 较为稳定，适合需要连续稳定流
量的应用场景。
可靠性高
由于三柱塞式往复泵的结构简单、 紧凑，因此其可靠性较高，故障
率较低。
应用范围
石油化工
三柱塞式往复泵在石油化工领域中广泛应用于输送各种油品、化 工原料等。
制药行业
由于三柱塞式往复泵具有高洁净度和耐腐蚀性等特点，因此也广泛 应用于制药行业中输送药品和原料。
THANK YOU
感谢各位观看
化工流程控制
三柱塞式往复泵在化工流程控制中起到关键作用，如液位 控制、流量调节等，能够实现精确的流量和压力控制，保 证生产过程的稳定性和连续性。
石油工业应用
油气开采与输送
在石油工业中，三柱塞式往复泵广泛应用于油气开采和输送环节， 能够承受高粘度、高压力和高温的工况，确保油气的安全、高效输 送。
钻井液循环
目的和背景
目的
本文旨在介绍三柱塞式往复泵的结构、工作原理、性能特点以及应用情况，以便读者更好地了解和使用这种设备。
背景
随着工业生产的不断发展，流体输送设备在各个领域的应用越来越广泛。三柱塞式往复泵作为一种重要的流体输 送设备，其性能和使用效果直接影响到工业生产过程。因此，对三柱塞式往复泵进行深入的研究和了解具有重要 的实际意义。
Gaso 3467 三缸柱塞泵 产品规格说明书
SpecU.S. Standard Type:triplexMinimum Plunger Diameter:Maximum Plunger Diameter:Stroke length:4"Maximum Working Pressure:PSI Rod/Piston Load:6800lb Gallons per Minute:Barrels per Day:Brake Horse Power:90.8Gaso, 3467, Triplex, Plunger PumpPumps in this series 3467SpecsPump CurvesHover over Power Curves to reveal RPM and GPMFeatures/BenefitsGASO TRIPLEX PLUNGER PUMPSRatings published here in are intended to be used only for preliminary planning purposes, and as such carried no warranties whatsoever. All applications for gas opines must be approved in writing. THE INFORMATION CONTAINED HERE IS TRANSCRIBED FROM A GASO TECHNICAL MANUAL FROMM THE 1960’S - 70’S. IEQ INDUSTRIES OR THE CUSTODIANS OF THIS WEBSITE ARE NOT RESPONSIBLE FOR ITS CONTENT.GASO pumps are engineered to deliver the book plus values which have distinguished GASO pumps for over 60 years and to provide longer life and lower maintenance costs. Important design features include:Power End SpecificationsPower Frame. High-strength gray iron alloy casting with heavy wall sections well written to ensure rigid construction.Crankshaft. Mounted with centerline of shaft on centerline of cross heads. Crankshaft may extend from either side of the pump.Crankshaft Bearings.Interchangeable heavy-duty roller bearings.Phone:IEQ Industries LtdPO Box 230097Grand Rapids, MI 49523800.544.9053 |616.452.6882Connecting Rods. All triplex plunger pumps are equipped with H type construction rods, with renewable Babbit lined steel backed shell bearings at the crank end and bronze bushings at crosshead end.Crossheads. Figures 3088, and series 3200, 3300, 313, 3400, 3800, 3900, 3600 and 3700 pumps are furnished with cylindrical type high-strength alloy castings. Series 3500 pumps are furnished with semi-cylindrical typecasting. Cross head tends are hardened and ground steel.Lubrication. All power and parts are lubricated by splash system from oil in the crankcase reservoir. Power frame has an oil return channel, from front of the cross heads back to the crankcase, to permit constant circulation of oil and to help keep oil cool. Positive power and lubrication is optional for series 3700 pumps.Stuffing Boxes. Figures 3088 and series 3200, 3300, 3400, 3500, 3800, and 3900 pumps are furnished with double lip “Uâ€Âcup packings. Series 3630 700 pumps are furnished with a set of four non-crushable lip type packing rings.Fluid End SpecificationsFLUID END BODY. Alloys which are stocked our Molybnenum alloy iron for crude oil and freshwater service, and steel for pumping petroleum products in hazardous locations. Aluminum bronze alloys are used for salt water and other corrosive liquids. Special alloys such as Hastalloy C, Inconel or stainless steel can be furnished upon request.VALVES. Figure 3211 and 3364 pumps are furnished standard with wing guided type valves and seats. Figures 3365, 3088 and series 3113, 3400, 3500, 3800, 3900, 3630 700 pumps are furnished with stem guided disk type valve assemblies.CYLINDER HEADS AND VALVE COVERS. 3211 and 3364 pumps with aluminum bronze and Molybdenum alloy fluid ends have threaded valve covers and cylinder heads, all other our bolt on type.PLUNGERS. Plunger materials are available in: file hard steel,colmonoy's surfaced steel, solid ceramic, and chrome plated steel.STUFFING BOXES. All triplex pump boxes, with the exception of figures 3088, 3583, and series 3900, 3630 3700 pumps, are board directly into the fluid body. Stuffing boxes are for figures 3088, nerdy 3583 and series 3800, 3900, 3630 and 3700 pumps are replaceable type.PACKING. Standard packing is a set of non-crushable lid tight packing rings. Other packing can be furnished for special applications.PlLUNGER LUBRICATION. Furnished by use of grip oilers or regulated flow of oil from a force-feed's lubricator. Lubricate or is mounted on the pump with separate oil lines to each plunger.Disclaimer IThis website is intended as a reference tool only. It has been constructed from published data that is based on manufacturer's sales and engineering documents that are either current, historical and obsolete. Much of the machinery data contained herein has been re-rated through the years with different engineering criteria which maybe in conflict with legacy data. Much of the content published here is calculated online with the use of dynamic data using formulas and extrapolations considered to be sound engineering formulas and are correct to the degree that the data used is accurate. We have done our best to be as precise as as possible in this posting but do not represent any of the calculations or performance data to be entirely accurate. The data published here is intended to be general information rather than actual and to serve as a reference rather than a technical absolute. The user of such data should confirm such information independently.Copyright and Disclaimers is your resource for Gaso pumps, Gaso pump parts and a supplier of ORIGINAL GASO PARTS and equipment, new used and remanufactured Wheatley, GASO andWheatley/GASO plunger and piston pumps and pump parts and is not affiliated with Wheatley/GASO Inc. or its parent company, National Oilwell Varco,p Copyright ©2017, IntelleQ Holdings, LLC. All rights reserved, *Used under license from IntelleQ Holdings, LLC.。
【陕西仁合】米顿罗计量泵综述
Company Confidential 内部资料， 陕西仁合科工贸有限责任公司所有，翻录仿用必究
计量泵应用：
食品行业
核电站
水处理
化工行业
石化行业
造纸行业
Company Confidential 内部资料，陕西仁合科工 贸有限责任公司所有，翻录仿用必究
中石化“十大聚丙装置”计量 泵
介质：TEAL （三乙基铝），遇空气爆炸 泵型：米顿罗 Milroyal D, “三明治”式金属隔膜泵头
主要应用：
•各类循环水处理应用 • 反渗透，泳池水处理 • 造纸，废水处理等
● ● ● ● ● ●
Company Confidential 内部资料， 陕西仁合科工贸有限责任公司所有，翻录仿用必究
® G 系列机械隔膜计量泵
流量 : 0 - 1800 l/h
最高压力 : 12 bar
偏心轮机构调节流量 可接收外部信号，进行比例控制 可选特殊泵头结构：浆料、高粘度、双
计量泵驱动形式
三种基本形式：
• 电机驱动
Company Confidential 内部资料， 陕西仁合科工贸有限责任公司所有，翻录仿用必究
计量泵驱动形式
三种基本形式：
• 电机驱动 • 电磁驱动
Company Confidential 内部资料， 陕西仁合科工贸有限责任公司所有，翻录仿用必究
计量泵驱动形式
单头流量 : 0 - 16,000 l/h 最高压力 : 1000 bar 调节比 10:1,稳态精度1% 输送介质温度可达200OC以上 隔膜材料: PTFE/PEEK/316 泵头结构: 双隔膜就地/远程报警, 保温 夹套 可多头并联,每头流量均可单独调节 手动，电动，气动,调频控制 高性能液压隔膜泵/柱塞泵 符合API 675标准